Keep sa29200.mt

[thirdparty/binutils-gdb.git] / ChangeLog

Thu Apr 30 08:56:20 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: pass INSTALL, INSTALL_DATA, INSTALL_PROGRAM on
	  install.

Fri Apr 24 15:51:51 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: don't print subdir_do or recursion lines.

Fri Apr 24 15:22:04 1992  K. Richard Pixley  (rich@cygnus.com)

	* standards.texi: added menu item.

	* Makefile.in: build and install standards.info.

	* standards.texi: new file.

Wed Apr 22 18:06:55 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* configure: test for and move config.status pieces from
	  ${subdir}/.

Wed Apr 22 14:38:34 1992  Fred Fish  (fnf@cygnus.com)

	* config/mh-delta88, config/mh-ncr3000:  Replace MINUS_G with
	CFLAGS per new configuration strategy.
	* configure:  Test for existance of files before trying to mv
	them, to avoid numerous non-existance messages.

Tue Apr 21 12:31:33 1992  K. Richard Pixley  (rich@cygnus.com)

	* configure: correct final line of config.status.

	* configure: patch from eggert.  Avoids a protection problem if
	  the original Makefile.in is read only.

	* configure: use move-if-change from gcc to create config.status.
	  Some makefiles depend on config.status to tell if a directory
	  has been reconfigured for a different host.  This change
	  prevents those directories from remaking everything in the case
	  where the reconfig was only intended to rebuild a Makefile.

	* configure: test for config.sub with "config.sub sun4" rather
	  than "config.sub ${host_alias}".  Otherwise we can't tell a bad
	  host alias from a missing config.sub.

Mon Apr 20 18:16:36 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: explicitly pass CFLAGS on recursion. no longer pass
	  MINUS_G (this can be done with CFLAGS).  Default CFLAGS to -g.

Fri Apr 17 18:27:51 1992  Per Bothner  (bothner@cygnus.com)

	* configure: mkdir ${subdir} as needed.

Wed Apr 15 17:37:22 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in,configure.in: added autoconf.

Wed Apr 15 17:27:34 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: no longer pass against on recursion.

	* Makefile.in: added .NOEXPORT: so that stray makefile_frag
	  definitions are not inherited.

	* configure: correct makesrcdir when subdir is .

Tue Apr 14 11:56:09 1992  Per Bothner  (bothner@cygnus.com)

	* configure:  Add support for 'subdirs' variable, which is
	like 'configdirs', except that configure doesn't re-invoke
	itself for subdirs, it just creates a Makefile for each subdir.
	* configure.texi:  Document subdirs.

Mon Apr 13 18:50:16 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)

	* configure.in: added flex to configdirs

Mon Apr 13 18:43:55 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: remove clean-stamps from clean.

Sat Apr 11 03:52:03 1992  John Gilmore  (gnu at cygnus.com)

	* configure.in:  Add gdbtest to configdirs.

Fri Apr 10 23:11:49 1992  Fred Fish  (fnf@cygnus.com)

	* Makefile.in (MINUS_G):  Add macro, default to -g, pass on
	to recursive makes.
	* configure.in:  Recognize new ncr3000 config.

Wed Apr  8 23:08:12 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in, configure.in: removed references to gdbm.

Tue Apr  7 16:48:20 1992  Per Bothner  (bothner@cygnus.com)

	* config.sub:  Don't canonicalize os value
	newsos* to bsd (readline needs to check for newsos).
	(This fix was earlier made Jan 31, but got re-broken.)

Mon Apr  6 14:34:08 1992  Stu Grossman  (grossman at cygnus.com)

	* configure.in:  sco is an os, not a vendor!

	* configure:  Quote $( better.  Keep various shells happy.

Tue Mar 31 16:32:57 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: eliminate stamp-files.

Mon Mar 30 22:20:23 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: add send_pr.  remove "force" from .stmp-gprof rule.
	  Supress echoing of all the "if [ -d ... $(MAKE)" lines.

Wed Mar 25 15:20:04 1992  Stu Grossman  (grossman@cygnus.com)

	* config.sub:  fix iris/iris3.

Wed Mar 25 10:34:19 1992  K. Richard Pixley  (rich@cygnus.com)

	* configure: re-add -rm.

Tue Mar 24 23:50:16 1992  K. Richard Pixley  (rich@cygnus.com)

	* Maskefile.in: add .stmp-rcs to all.

	* configure.in: remove gas from rs6000 build, use aix host fragment.

Mon Mar 23 19:43:35 1992  K. Richard Pixley  (rich@cygnus.com)

	* configure: pass down site_option during recursion.

Thu Mar 19 16:49:36 1992  Stu Grossman  (grossman at cygnus.com)

	* Makefile.in (all.cross):  Add .stmp-bfd .stmp-readline.

Wed Mar 18 15:29:33 1992  Mike Stump  (mrs@cygnus.com)

	* configure: Change exec_prefix so that it really defaults to prefix.

Sat Mar 14 17:20:38 1992  Fred Fish  (fnf@cygnus.com)

	* Makefile.in, configure.in:  Add support for mmalloc library.

Fri Mar 13 18:44:18 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: add stmp dependencies for a few more things.

Thu Mar 12 04:56:24 1992  K. Richard Pixley  (rich@cygnus.com)

	* configure: adjusted error message on objdir/srcdir configure
	  collision, per john's suggestion.

	* Makefile.in: add libiberty stmp to all and all.cross.

Wed Mar 11 02:07:52 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in: remove force dependencies, add grep to all.

Tue Mar 10 21:49:18 1992  K. Richard Pixley  (rich@mars.cygnus.com)

	* Makefile.in: drop flex.  make stamp files work.

	* configure: added test for conflicting configuration in srcdir,
	  remove trailing slashes from srcdir.  Otherwise emacs gdb mode
	  gets cranky.  use relative paths for configure and srcdir
	  whenever possible.  Send some error messages to stderr that were
	  going to stdout.

Tue Mar 10 18:01:55 1992  Per Bothner  (bothner@cygnus.com)

	* Makefile.in:  Fix libg++ rule to check for gcc directory
	before using gcc/gcc.  Also pass XTRAFLAGS.

Thu Mar  5 21:45:07 1992  K. Richard Pixley  (rich@sendai)

	* Makefile.in: added stmp-files so that directories aren't polled
	  when they are already built.

	* configure.texi: fixed a node pointer problem.

Thu Mar  5 12:05:58 1992  Stu Grossman  (grossman at cygnus.com)

	* config.sub configure.in config/.Sanitize config/mh-irix4
	gdb/.Sanitize gdb/configure.in gdb/mips-tdep.c gdb/mipsread.c
	gdb/procfs.c gdb/signame.h gdb/tm-irix3.h gdb/tm-mips.h
	gdb/xm-irix4.h gdb/config/.Sanitize gdb/config/mt-irix3
	gdb/config/mh-irix4 texinfo/configure.in:  Port to SGI Irix-4.x.

Wed Mar  4 02:57:46 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* configure: -recurring becomes -silent.  corrected help message
	  for -site= option.

	* Makefile.in: mkdir $(exec_prefix) and $(tooldir).

Tue Mar  3 14:51:21 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* configure: when building Makefile for crosses, replace
	  tooldir and program_prefix.  default srcdir from location of
	  config.sub.  remove "for host in hosts" and "for target in
	  targets" loops.

Wed Feb 26 19:48:25 1992  K. Richard Pixley  (rich@rtl.cygnus.com)

	* Makefile.in: Do not pass bindir or mandir to cvs.

Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)

	* Makefile.in, configure.in: removed traces of namesubdir,
	  -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
	  copyrights to '92, changed some from Cygnus to FSF.

	* configure.texi: remove most references to multiple hosts,
	  multiple targets, subdirs, etc.

	* configure.man: removed rcsid. reference config.sub not
	  config.subr.

	* Makefile.in: mkdir $(infodir) on install-info.

Wed Feb 19 15:41:13 1992  John Gilmore  (gnu at cygnus.com)

	* configure.texi:  Explain better about .gdbinit and about
	the environment that configure.in sections run in.

Fri Feb  7 07:55:00 1992  John Gilmore  (gnu at cygnus.com)

	* configure.in:  Ultrix is only a decstation if it's a MIPS.

Fri Jan 31 21:54:51 1992  John Gilmore  (gnu at cygnus.com)

	* README:  DOC.configure => cfg-paper.texi.

Fri Jan 31 21:48:18 1992  Stu Grossman  (grossman at cygnus.com)

	* config.sub (near case $os):  Don't convert newsos* to bsd!

Fri Jan 31 02:27:32 1992  John Gilmore  (gnu at cygnus.com)

	* Makefile.in:  Reinstall change from gdb-4.3 that reduces
	the number of copies of COPYING that go into the GDB tar file.

Thu Jan 30 16:17:30 1992  Stu Grossman  (grossman at cygnus.com)

	* bfd/configure.in, config/mh-sco, gdb/config/mh-i386sco,
	gdb/config/mt-i386v32, gdb/configure.in, readline/configure.in:
	Fix SCO configuration stuff.

Tue Jan 28 23:51:07 1992  Per Bothner  (bothner at cygnus.com)

	* Makefile.in:  For libg++, make sure the -I pointing
	to the gcc directory goes *after* all the libg++-local -I flags.
	Also, move just-gcc dependency from just-libg++ to all-libg++.

Tue Jan 28 12:56:24 1992  Stu Grossman  (grossman at cygnus.com)

	* configure:  Change -x to -f to keep Ultrix /bin/test happy.

Sat Jan 18 17:45:11 1992  Stu Grossman  (grossman at cygnus.com)

	* Makefile.in (make-gdb.tar.Z):  Remove texinfo targets.

Sat Jan 18 17:03:21 1992  Fred Fish  (fnf at cygnus.com)

	* config.sub:  Add stratus configuration frags.  Also 
	submitted to FSF.

Sat Jan 18 15:35:29 1992  Stu Grossman  (grossman at cygnus.com)

	* Makefile.in (DEV_SUPPORT):  add configure.man.

	* config.sub(Decode manufacturer-specific):  add -none*.

Fri Jan 17 17:58:05 1992  Stu Grossman  (grossman at cygnus.com)

	* Makefile.in:  remove form feeds to make Sun's make happy.
	(DEVO_SUPPORT):  DOC.configure => cfg-paper.texi.

Sat Jan  4 16:11:44 1992  John Gilmore  (gnu at cygnus.com)

	* Makefile.in (AR_FLAGS):  Make quieter.

Thu Jan  2 22:57:12 1992  John Gilmore  (gnu at cygnus.com)

	* configure.in:  Add libg++.
	* configure:  When verbose, don't output the command line at each
	level; it will be unremarkably the same as the previous version,
	which will be the same as what the user typed.

Fri Dec 27 16:26:47 1991  K. Richard Pixley  (rich at cygnus.com)

	* configure.in, Makefile.in: fix clean-info, add flex.  add
	  fileutils.

	* configure: be less sensitive to spaces in Makefile.in.  Do not
	  look for sources in "..".  Doing so breaks subdirectories that
	  might have their own configure.  If a subdir has it's own
	  configure script, use it.

Thu Dec 26 16:30:26 1991  K. Richard Pixley  (rich at cygnus.com)

	* cfg-paper.texi: some changes suggested by rms.

Thu Dec 26 10:13:36 1991  Fred Fish  (fnf at cygnus.com)

	* config.sub:  Merge in some small additions from the FSF version,
	taken from the gcc distribution, to bring the Cygnus and FSF
	versions into closer sync.

Fri Dec 20 11:34:18 1991  Fred Fish  (fnf at cygnus.com)

	* configure.in:  Changed svr4 references to sysv4.

Thu Dec 19 15:54:29 1991  K. Richard Pixley  (rich at cygnus.com)

	* configure: added -V for version number option.

Wed Dec 18 15:39:34 1991  K. Richard Pixley  (rich at cygnus.com)

	* DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
	  renamed from DOC.configure to cfg-paper.texi.

Mon Dec 16 23:05:19 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* configure, config.subr, config.sub: config.subr is now
	  config.sub again.

Fri Dec 13 01:17:06 1991  K. Richard Pixley  (rich at cygnus.com)

	* configure.texi: new file, in progress.

	* Makefile.in: build info file and install the man page for
	  configure.

	* configure.man: new file, first cut.

	* configure: find config.subr again now that configuration "none"
	  has gone.  removed all traces of the -ansi option.  removed all
	  traces of the -languages option.

	* config.subr: resync from rms.

Wed Dec 11 22:25:20 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* configure, config.sub, config.subr: merge config.sub into
	  config.subr, call the result config.subr, remove config.sub, use
	  config.subr.

	* Makefile.in: revised install for dir.info.

Tue Dec 10 00:04:35 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* configure.in: add decstation host makefile frag.

	* Makefile.in: BISON now bison -y again.  also install-gcc on
	  install.  clean-gdbm on clean.  infodir belongs in datadir.
	  Make directories for info install.  Build dir.info here then
	  install it.

Mon Dec  9 16:48:33 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Makefile.in: fix for bad directory tests.

Sat Dec  7 00:17:01 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* configure: \{1,2\} appears to be a sysv'ism.  Use a different
	  regexp.  -srcdir relative was being handled incorrectly.

	* Makefile.in: unwrapped some for loops so that parallel makes
	  work again and so one can focus one's attention on a particular
	  package.

Fri Dec  6 00:22:08 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* configure: added PWD as a stand in for `pwd` (for speed). use
	  elif wherever possible.  make -srcdir work without -objdir.
	  -objdir= commented out. 

Thu Dec  5 22:46:52 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* configure: +options become --options.  -subdirs commented out.
	  added -host, -datadir.  Renamed -destdir to -prefix.  Comment in
	  Makefile now at top of generated Makefile.  Removed cvs log
	  entries.  added -srcdir.  create .gdbinit only if there is one
	  in ${srcdir}.

	* Makefile.in: idestdir and ddestdir go away.  Added copyrights
	  and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
	  and mandir now keyed off datadir by default.

Fri Nov 22 07:38:11 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* Freshly created ChangeLog.