]> git.ipfire.org Git - people/ms/strongswan.git/blame - NEWS
Fixed some typos, courtesy of codespell
[people/ms/strongswan.git] / NEWS
CommitLineData
6a24637d
AS
1strongswan-5.5.0
2----------------
3
4- The new libtpmtss library offers support for both TPM 1.2 and TPM 2.0
5 Trusted Platform Modules. This allows the Attestation IMC/IMV pair to
6 do TPM 2.0 based attestation.
7
8fafbffd
AS
8 - Enhanced the functionality of the swanctl --list-conns command by
9 listing IKE_SA and CHILD_SA reauthentication and rekeying settings.
10
11 - IPsec policy rule priorities can be set manually and restricted to a
12 network interface.
13
6a24637d 14
b5eed58a
AS
15strongswan-5.4.0
16----------------
17
6fc68343
TB
18- Support for IKEv2 redirection (RFC 5685) has been added. Plugins may
19 implement the redirect_provider_t interface to decide if and when to redirect
20 connecting clients. It is also possible to redirect established IKE_SAs based
21 on different selectors via VICI/swanctl. Unless disabled in strongswan.conf
22 the charon daemon will follow redirect requests received from servers.
23
c171afea
TB
24- The ike: prefix enables the explicit configuration of signature scheme
25 constraints against IKEv2 authentication in rightauth, which allows the use
26 of different signature schemes for trustchain verification and authentication.
27
b4337c5b
TB
28- The initiator of an IKEv2 make-before-break reauthentication now suspends
29 online certificate revocation checks (OCSP, CRLs) until the new IKE_SA and all
30 CHILD_SAs are established. This is required if the checks are done over the
31 CHILD_SA established with the new IKE_SA. This is not possible until the
32 initiator installs this SA and that only happens after the authentication is
33 completed successfully. So we suspend the checks during the reauthentication
34 and do them afterwards, if they fail the IKE_SA is closed. This change has no
35 effect on the behavior during the authentication of the initial IKE_SA.
36
b5eed58a
AS
37- For the vici plugin a Vici:Session Perl CPAN module has been added to allow
38 Perl applications to control and/or monitor the IKE daemon using the VICI
39 interface, similar to the existing Python egg or Ruby gem.
40
5c25780c
AS
41- Traffic selectors with port ranges can now be configured in the Linux kernel:
42 e.g. remote_ts = 10.1.0.0/16[tcp/20-23] local_ts = dynamic[tcp/32768-65535].
43 The port range must map to a port mask, though since the kernel does not
44 support arbitrary ranges.
45
bebccf98
AS
46- The vici plugin allows the configuration of IPv4 and IPv6 address ranges
47 in local and remote traffic selectors. Since both the Linux kernel and
48 iptables cannot handle arbitrary ranges, address ranges are mapped to the next
49 larger CIDR subnet by the kernel-netlink and updown plugins, respectively.
50
51- Implemented IKEv1 IPv4/IPv6 address subnet and range identities that can be
52 used as owners of shared secrets.
53
b5eed58a 54
33895f4b
TB
55strongswan-5.3.5
56----------------
57
58- Properly handle potential EINTR errors in sigwaitinfo(2) calls that replaced
59 sigwait(3) calls with 5.3.4.
60
61- RADIUS retransmission timeouts are now configurable, courtesy of Thom Troy.
62
63
6590298d
AS
64strongswan-5.3.4
65----------------
66
453e204a
TB
67- Fixed an authentication bypass vulnerability in the eap-mschapv2 plugin that
68 was caused by insufficient verification of the internal state when handling
69 MSCHAPv2 Success messages received by the client.
70 This vulnerability has been registered as CVE-2015-8023.
71
6590298d
AS
72- The sha3 plugin implements the SHA3 Keccak-F1600 hash algorithm family.
73 Within the strongSwan framework SHA3 is currently used for BLISS signatures
74 only because the OIDs for other signature algorithms haven't been defined
75 yet. Also the use of SHA3 for IKEv2 has not been standardized yet.
76
77
63d37038
AS
78strongswan-5.3.3
79----------------
80
18e0d66b
TB
81- Added support for the ChaCha20/Poly1305 AEAD cipher specified in RFC 7539 and
82 RFC 7634 using the chacha20poly1305 ike/esp proposal keyword. The new chapoly
83 plugin implements the cipher, if possible SSE-accelerated on x86/x64
84 architectures. It is usable both in IKEv2 and the strongSwan libipsec ESP
85 backend. On Linux 4.2 or newer the kernel-netlink plugin can configure the
86 cipher for ESP SAs.
39660798 87
63d37038 88- The vici interface now supports the configuration of auxiliary certification
18e0d66b
TB
89 authority information as CRL and OCSP URIs.
90
91- In the bliss plugin the c_indices derivation using a SHA-512 based random
92 oracle has been fixed, generalized and standardized by employing the MGF1 mask
93 generation function with SHA-512. As a consequence BLISS signatures unsing the
94 improved oracle are not compatible with the earlier implementation.
95
96- Support for auto=route with right=%any for transport mode connections has
97 been added (the ikev2/trap-any scenario provides examples).
98
99- The starter daemon does not flush IPsec policies and SAs anymore when it is
100 stopped. Already existing duplicate policies are now overwritten by the IKE
101 daemon when it installs its policies.
102
103- Init limits (like charon.init_limit_half_open) can now optionally be enforced
104 when initiating SAs via VICI. For this, IKE_SAs initiated by the daemon are
105 now also counted as half-open SAs, which, as a side-effect, fixes the status
106 output while connecting (e.g. in ipsec status).
107
108- Symmetric configuration of EAP methods in left|rightauth is now possible when
109 mutual EAP-only authentication is used (previously, the client had to
110 configure rightauth=eap or rightauth=any, which prevented it from using this
111 same config as responder).
112
113- The initiator flag in the IKEv2 header is compared again (wasn't the case
114 since 5.0.0) and packets that have the flag set incorrectly are again ignored.
115
a215008c 116- Implemented a demo Hardcopy Device IMC/IMV pair based on the "Hardcopy
453e204a 117 Device Health Assessment Trusted Network Connect Binding" (HCD-TNC)
a215008c
AS
118 document drafted by the IEEE Printer Working Group (PWG).
119
120- Fixed IF-M segmentation which failed in the presence of multiple small
121 attributes in front of a huge attribute to be segmented.
122
39660798 123
2b19e517
TB
124strongswan-5.3.2
125----------------
126
127- Fixed a vulnerability that allowed rogue servers with a valid certificate
128 accepted by the client to trick it into disclosing its username and even
129 password (if the client accepts EAP-GTC). This was caused because constraints
130 against the responder's authentication were enforced too late.
131 This vulnerability has been registered as CVE-2015-4171.
132
133
eb423ebb
AS
134strongswan-5.3.1
135----------------
136
099260d8
TB
137- Fixed a denial-of-service and potential remote code execution vulnerability
138 triggered by IKEv1/IKEv2 messages that contain payloads for the respective
139 other IKE version. Such payload are treated specially since 5.2.2 but because
140 they were still identified by their original payload type they were used as
141 such in some places causing invalid function pointer dereferences.
142 The vulnerability has been registered as CVE-2015-3991.
143
e8ba1d47
MW
144- The new aesni plugin provides CBC, CTR, XCBC, CMAC, CCM and GCM crypto
145 primitives for AES-128/192/256. The plugin requires AES-NI and PCLMULQDQ
146 instructions and works on both x86 and x64 architectures. It provides
147 superior crypto performance in userland without any external libraries.
148
149
c6595222
AS
150strongswan-5.3.0
151----------------
152
4a00f912
MW
153- Added support for IKEv2 make-before-break reauthentication. By using a global
154 CHILD_SA reqid allocation mechanism, charon supports overlapping CHILD_SAs.
155 This allows the use of make-before-break instead of the previously supported
156 break-before-make reauthentication, avoiding connectivity gaps during that
157 procedure. As the new mechanism may fail with peers not supporting it (such
158 as any previous strongSwan release) it must be explicitly enabled using
159 the charon.make_before_break strongswan.conf option.
160
3f1ef3a6
TB
161- Support for "Signature Authentication in IKEv2" (RFC 7427) has been added.
162 This allows the use of stronger hash algorithms for public key authentication.
163 By default, signature schemes are chosen based on the strength of the
164 signature key, but specific hash algorithms may be configured in leftauth.
165
166- Key types and hash algorithms specified in rightauth are now also checked
167 against IKEv2 signature schemes. If such constraints are used for certificate
168 chain validation in existing configurations, in particular with peers that
169 don't support RFC 7427, it may be necessary to disable this feature with the
170 charon.signature_authentication_constraints setting, because the signature
171 scheme used in classic IKEv2 public key authentication may not be strong
172 enough.
173
1e1e88e6
MW
174- The new connmark plugin allows a host to bind conntrack flows to a specific
175 CHILD_SA by applying and restoring the SA mark to conntrack entries. This
176 allows a peer to handle multiple transport mode connections coming over the
177 same NAT device for client-initiated flows. A common use case is to protect
178 L2TP/IPsec, as supported by some systems.
179
dc88d179
MW
180- The forecast plugin can forward broadcast and multicast messages between
181 connected clients and a LAN. For CHILD_SA using unique marks, it sets up
182 the required Netfilter rules and uses a multicast/broadcast listener that
183 forwards such messages to all connected clients. This plugin is designed for
184 Windows 7 IKEv2 clients, which announces its services over the tunnel if the
185 negotiated IPsec policy allows it.
186
2185c29b
MW
187- For the vici plugin a Python Egg has been added to allow Python applications
188 to control or monitor the IKE daemon using the VICI interface, similar to the
189 existing ruby gem. The Python library has been contributed by Björn Schuberg.
190
f05a578b
MW
191- EAP server methods now can fulfill public key constraints, such as rightcert
192 or rightca. Additionally, public key and signature constraints can be
193 specified for EAP methods in the rightauth keyword. Currently the EAP-TLS and
194 EAP-TTLS methods provide verification details to constraints checking.
195
27bd0fed
AS
196- Upgrade of the BLISS post-quantum signature algorithm to the improved BLISS-B
197 variant. Can be used in conjunction with the SHA256, SHA384 and SHA512 hash
198 algorithms with SHA512 being the default.
199
e0359350
AS
200- The IF-IMV 1.4 interface now makes the IP address of the TNC access requestor
201 as seen by the TNC server available to all IMVs. This information can be
202 forwarded to policy enforcement points (e.g. firewalls or routers).
203
7b4a96b2
AS
204- The new mutual tnccs-20 plugin parameter activates mutual TNC measurements
205 in PB-TNC half-duplex mode between two endpoints over either a PT-EAP or
206 PT-TLS transport medium.
207
4a00f912 208
045501d5
MW
209strongswan-5.2.2
210----------------
211
919449a3
TB
212- Fixed a denial-of-service vulnerability triggered by an IKEv2 Key Exchange
213 payload that contains the Diffie-Hellman group 1025. This identifier was
214 used internally for DH groups with custom generator and prime. Because
215 these arguments are missing when creating DH objects based on the KE payload
216 an invalid pointer dereference occurred. This allowed an attacker to crash
217 the IKE daemon with a single IKE_SA_INIT message containing such a KE
218 payload. The vulnerability has been registered as CVE-2014-9221.
219
045501d5
MW
220- The left/rightid options in ipsec.conf, or any other identity in strongSwan,
221 now accept prefixes to enforce an explicit type, such as email: or fqdn:.
222 Note that no conversion is done for the remaining string, refer to
223 ipsec.conf(5) for details.
224
30a90ccf 225- The post-quantum Bimodal Lattice Signature Scheme (BLISS) can be used as
32d19652
AS
226 an IKEv2 public key authentication method. The pki tool offers full support
227 for the generation of BLISS key pairs and certificates.
228
30a90ccf
TB
229- Fixed mapping of integrity algorithms negotiated for AH via IKEv1. This could
230 cause interoperability issues when connecting to older versions of charon.
231
045501d5 232
dcdcae01
MW
233strongswan-5.2.1
234----------------
235
236- The new charon-systemd IKE daemon implements an IKE daemon tailored for use
237 with systemd. It avoids the dependency on ipsec starter and uses swanctl
238 as configuration backend, building a simple and lightweight solution. It
239 supports native systemd journal logging.
240
55758bec
TB
241- Support for IKEv2 fragmentation as per RFC 7383 has been added. Like IKEv1
242 fragmentation it can be enabled by setting fragmentation=yes in ipsec.conf.
243
e9a93cb7
AS
244- Support of the TCG TNC IF-M Attribute Segmentation specification proposal.
245 All attributes can be segmented. Additionally TCG/SWID Tag, TCG/SWID Tag ID
246 and IETF/Installed Packages attributes can be processed incrementally on a
247 per segment basis.
248
9180c921
MW
249- The new ext-auth plugin calls an external script to implement custom IKE_SA
250 authorization logic, courtesy of Vyronas Tsingaras.
251
7431ad0d
MW
252- For the vici plugin a ruby gem has been added to allow ruby applications
253 to control or monitor the IKE daemon. The vici documentation has been updated
254 to include a description of the available operations and some simple examples
255 using both the libvici C interface and the ruby gem.
256
dcdcae01 257
37cb91d7
AS
258strongswan-5.2.0
259----------------
260
4c5e52f5
MW
261- strongSwan has been ported to the Windows platform. Using a MinGW toolchain,
262 many parts of the strongSwan codebase run natively on Windows 7 / 2008 R2
263 and newer releases. charon-svc implements a Windows IKE service based on
264 libcharon, the kernel-iph and kernel-wfp plugins act as networking and IPsec
265 backend on the Windows platform. socket-win provides a native IKE socket
266 implementation, while winhttp fetches CRL and OCSP information using the
267 WinHTTP API.
268
4787523c
MW
269- The new vici plugin provides a Versatile IKE Configuration Interface for
270 charon. Using the stable IPC interface, external applications can configure,
271 control and monitor the IKE daemon. Instead of scripting the ipsec tool
272 and generating ipsec.conf, third party applications can use the new interface
273 for more control and better reliability.
274
b30c09ea
MW
275- Built upon the libvici client library, swanctl implements the first user of
276 the VICI interface. Together with a swanctl.conf configuration file,
277 connections can be defined, loaded and managed. swanctl provides a portable,
278 complete IKE configuration and control interface for the command line.
73303700 279 The first six swanctl example scenarios have been added.
b30c09ea 280
6048d773
AS
281- The SWID IMV implements a JSON-based REST API which allows the exchange
282 of SWID tags and Software IDs with the strongTNC policy manager.
283
37cb91d7 284- The SWID IMC can extract all installed packages from the dpkg (Debian,
3d2b36b8
TB
285 Ubuntu, Linux Mint etc.), rpm (Fedora, RedHat, OpenSUSE, etc.), or
286 pacman (Arch Linux, Manjaro, etc.) package managers, respectively, using the
287 swidGenerator (https://github.com/strongswan/swidGenerator) which generates
288 SWID tags according to the new ISO/IEC 19770-2:2014 standard.
37cb91d7
AS
289
290- All IMVs now share the access requestor ID, device ID and product info
291 of an access requestor via a common imv_session object.
292
9b9d5223
AS
293- The Attestation IMC/IMV pair supports the IMA-NG measurement format
294 introduced with the Linux 3.13 kernel.
295
41a4d5a4
AS
296- The aikgen tool generates an Attestation Identity Key bound to a TPM.
297
03b5def0 298- Implemented the PT-EAP transport protocol (RFC 7171) for Trusted Network
6048d773 299 Connect.
03b5def0 300
52d77f32
MW
301- The ipsec.conf replay_window option defines connection specific IPsec replay
302 windows. Original patch courtesy of Zheng Zhong and Christophe Gouault from
303 6Wind.
304
37cb91d7 305
8101e6aa
MW
306strongswan-5.1.3
307----------------
308
e59ce07b
TB
309- Fixed an authentication bypass vulnerability triggered by rekeying an
310 unestablished IKEv2 SA while it gets actively initiated. This allowed an
311 attacker to trick a peer's IKE_SA state to established, without the need to
312 provide any valid authentication credentials. The vulnerability has been
313 registered as CVE-2014-2338.
314
8101e6aa
MW
315- The acert plugin evaluates X.509 Attribute Certificates. Group membership
316 information encoded as strings can be used to fulfill authorization checks
317 defined with the rightgroups option. Attribute Certificates can be loaded
318 locally or get exchanged in IKEv2 certificate payloads.
319
320- The pki command gained support to generate X.509 Attribute Certificates
321 using the --acert subcommand, while the --print command supports the ac type.
322 The openac utility has been removed in favor of the new pki functionality.
323
7dc7fdea
MW
324- The libtls TLS 1.2 implementation as used by EAP-(T)TLS and other protocols
325 has been extended by AEAD mode support, currently limited to AES-GCM.
326
8101e6aa 327
acc25f29
AS
328strongswan-5.1.2
329----------------
330
c2d5add6
TB
331- A new default configuration file layout is introduced. The new default
332 strongswan.conf file mainly includes config snippets from the strongswan.d
333 and strongswan.d/charon directories (the latter containing snippets for all
334 plugins). The snippets, with commented defaults, are automatically
335 generated and installed, if they don't exist yet. They are also installed
336 in $prefix/share/strongswan/templates so existing files can be compared to
337 the current defaults.
338
339- As an alternative to the non-extensible charon.load setting, the plugins
340 to load in charon (and optionally other applications) can now be determined
341 via the charon.plugins.<name>.load setting for each plugin (enabled in the
342 new default strongswan.conf file via the charon.load_modular option).
343 The load setting optionally takes a numeric priority value that allows
344 reordering the plugins (otherwise the default plugin order is preserved).
345
346- All strongswan.conf settings that were formerly defined in library specific
347 "global" sections are now application specific (e.g. settings for plugins in
348 libstrongswan.plugins can now be set only for charon in charon.plugins).
349 The old options are still supported, which now allows to define defaults for
350 all applications in the libstrongswan section.
351
acc25f29
AS
352- The ntru libstrongswan plugin supports NTRUEncrypt as a post-quantum
353 computer IKE key exchange mechanism. The implementation is based on the
354 ntru-crypto library from the NTRUOpenSourceProject. The supported security
355 strengths are ntru112, ntru128, ntru192, and ntru256. Since the private DH
356 group IDs 1030..1033 have been assigned, the strongSwan Vendor ID must be
357 sent (charon.send_vendor_id = yes) in order to use NTRU.
358
800b361e
AS
359- Defined a TPMRA remote attestation workitem and added support for it to the
360 Attestation IMV.
361
c2d5add6
TB
362- Compatibility issues between IPComp (compress=yes) and leftfirewall=yes as
363 well as multiple subnets in left|rightsubnet have been fixed.
364
572582f5
MW
365- When enabling its "session" strongswan.conf option, the xauth-pam plugin opens
366 and closes a PAM session for each established IKE_SA. Patch courtesy of
367 Andrea Bonomi.
acc25f29 368
0cec570a
MW
369- The strongSwan unit testing framework has been rewritten without the "check"
370 dependency for improved flexibility and portability. It now properly supports
371 multi-threaded and memory leak testing and brings a bunch of new test cases.
372
373
2b32884d
AS
374strongswan-5.1.1
375----------------
376
7b8fbd74
AS
377- Fixed a denial-of-service vulnerability and potential authorization bypass
378 triggered by a crafted ID_DER_ASN1_DN ID payload. The cause is an insufficient
379 length check when comparing such identities. The vulnerability has been
380 registered as CVE-2013-6075.
381
382- Fixed a denial-of-service vulnerability triggered by a crafted IKEv1
383 fragmentation payload. The cause is a NULL pointer dereference. The
384 vulnerability has been registered as CVE-2013-6076.
385
2b32884d 386- The lean stand-alone pt-tls-client can set up a RFC 6876 PT-TLS session
1c1ba803
TB
387 with a strongSwan policy enforcement point which uses the tnc-pdp charon
388 plugin.
2b32884d 389
fa2f6aa1
AS
390- The new TCG TNC SWID IMC/IMV pair supports targeted SWID requests for either
391 full SWID Tag or concise SWID Tag ID inventories.
392
38fb8e4e
MW
393- The XAuth backend in eap-radius now supports multiple XAuth exchanges for
394 different credential types and display messages. All user input gets
395 concatenated and verified with a single User-Password RADIUS attribute on
396 the AAA. With an AAA supporting it, one for example can implement
397 Password+Token authentication with proper dialogs on iOS and OS X clients.
398
399- charon supports IKEv1 Mode Config exchange in push mode. The ipsec.conf
400 modeconfig=push option enables it for both client and server, the same way
401 as pluto used it.
402
390d2b50
MW
403- Using the "ah" ipsec.conf keyword on both IKEv1 and IKEv2 connections,
404 charon can negotiate and install Security Associations integrity-protected by
405 the Authentication Header protocol. Supported are plain AH(+IPComp) SAs only,
406 but not the deprecated RFC2401 style ESP+AH bundles.
407
1c1ba803
TB
408- The generation of initialization vectors for IKE and ESP (when using libipsec)
409 is now modularized and IVs for e.g. AES-GCM are now correctly allocated
410 sequentially, while other algorithms like AES-CBC still use random IVs.
411
38fb8e4e
MW
412- The left and right options in ipsec.conf can take multiple address ranges
413 and subnets. This allows connection matching against a larger set of
414 addresses, for example to use a different connection for clients connecting
415 from a internal network.
416
34dff30c
AS
417- For all those who have a queasy feeling about the NIST elliptic curve set,
418 the Brainpool curves introduced for use with IKE by RFC 6932 might be a
419 more trustworthy alternative.
420
390d2b50
MW
421- The kernel-libipsec userland IPsec backend now supports usage statistics,
422 volume based rekeying and accepts ESPv3 style TFC padded packets.
423
1c1ba803
TB
424- With two new strongswan.conf options fwmarks can be used to implement
425 host-to-host tunnels with kernel-libipsec.
426
38fb8e4e
MW
427- load-tester supports transport mode connections and more complex traffic
428 selectors, including such using unique ports for each tunnel.
2b32884d 429
1c1ba803
TB
430- The new dnscert plugin provides support for authentication via CERT RRs that
431 are protected via DNSSEC. The plugin was created by Ruslan N. Marchenko.
432
433- The eap-radius plugin supports forwarding of several Cisco Unity specific
434 RADIUS attributes in corresponding configuration payloads.
435
436- Database transactions are now abstracted and implemented by the two backends.
437 If you use MySQL make sure all tables use the InnoDB engine.
438
390d2b50
MW
439- libstrongswan now can provide an experimental custom implementation of the
440 printf family functions based on klibc if neither Vstr nor glibc style printf
441 hooks are available. This can avoid the Vstr dependency on some systems at
442 the cost of slower and less complete printf functions.
443
fa2f6aa1 444
40b0a15c
MW
445strongswan-5.1.0
446----------------
447
3a938a6f
TB
448- Fixed a denial-of-service vulnerability triggered by specific XAuth usernames
449 and EAP identities (since 5.0.3), and PEM files (since 4.1.11). The crash
450 was caused by insufficient error handling in the is_asn1() function.
451 The vulnerability has been registered as CVE-2013-5018.
452
40b0a15c
MW
453- The new charon-cmd command line IKE client can establish road warrior
454 connections using IKEv1 or IKEv2 with different authentication profiles.
455 It does not depend on any configuration files and can be configured using a
456 few simple command line options.
457
458- The kernel-pfroute networking backend has been greatly improved. It now
78e6f69e 459 can install virtual IPs on TUN devices on OS X and FreeBSD, allowing these
40b0a15c
MW
460 systems to act as a client in common road warrior scenarios.
461
78e6f69e
TB
462- The new kernel-libipsec plugin uses TUN devices and libipsec to provide IPsec
463 processing in userland on Linux, FreeBSD and Mac OS X.
464
68957d18
MW
465- The eap-radius plugin can now serve as an XAuth backend called xauth-radius,
466 directly verifying XAuth credentials using RADIUS User-Name/User-Password
467 attributes. This is more efficient than the existing xauth-eap+eap-radius
468 combination, and allows RADIUS servers without EAP support to act as AAA
469 backend for IKEv1.
470
78e6f69e 471- The new osx-attr plugin installs configuration attributes (currently DNS
2334ae56
MW
472 servers) via SystemConfiguration on Mac OS X. The keychain plugin provides
473 certificates from the OS X keychain service.
78e6f69e
TB
474
475- The sshkey plugin parses SSH public keys, which, together with the --agent
476 option for charon-cmd, allows the use of ssh-agent for authentication.
477 To configure SSH keys in ipsec.conf the left|rightrsasigkey options are
478 replaced with left|rightsigkey, which now take public keys in one of three
479 formats: SSH (RFC 4253, ssh: prefix), DNSKEY (RFC 3110, dns: prefix), and
480 PKCS#1 (the default, no prefix).
481
482- Extraction of certificates and private keys from PKCS#12 files is now provided
483 by the new pkcs12 plugin or the openssl plugin. charon-cmd (--p12) as well
484 as charon (via P12 token in ipsec.secrets) can make use of this.
485
40b0a15c
MW
486- IKEv2 can now negotiate transport mode and IPComp in NAT situations.
487
3a938a6f 488- IKEv2 exchange initiators now properly close an established IKE or CHILD_SA
40b0a15c
MW
489 on error conditions using an additional exchange, keeping state in sync
490 between peers.
491
226f34e0 492- Using a SQL database interface a Trusted Network Connect (TNC) Policy Manager
78e6f69e
TB
493 can generate specific measurement workitems for an arbitrary number of
494 Integrity Measurement Verifiers (IMVs) based on the history of the VPN user
495 and/or device.
496
497- Several core classes in libstrongswan are now tested with unit tests. These
498 can be enabled with --enable-unit-tests and run with 'make check'. Coverage
499 reports can be generated with --enable-coverage and 'make coverage' (this
500 disables any optimization, so it should not be enabled when building
501 production releases).
502
56b753ca
MW
503- The leak-detective developer tool has been greatly improved. It works much
504 faster/stabler with multiple threads, does not use deprecated malloc hooks
505 anymore and has been ported to OS X.
506
78e6f69e
TB
507- chunk_hash() is now based on SipHash-2-4 with a random key. This provides
508 better distribution and prevents hash flooding attacks when used with
509 hashtables.
510
511- All default plugins implement the get_features() method to define features
512 and their dependencies. The plugin loader has been improved, so that plugins
513 in a custom load statement can be ordered freely or to express preferences
514 without being affected by dependencies between plugin features.
515
c3b8335c
MW
516- A centralized thread can take care for watching multiple file descriptors
517 concurrently. This removes the need for a dedicated listener threads in
518 various plugins. The number of "reserved" threads for such tasks has been
519 reduced to about five, depending on the plugin configuration.
520
521- Plugins that can be controlled by a UNIX socket IPC mechanism gained network
522 transparency. Third party applications querying these plugins now can use
523 TCP connections from a different host.
524
78e6f69e 525- libipsec now supports AES-GCM.
226f34e0 526
40b0a15c 527
2e12fc4b
AS
528strongswan-5.0.4
529----------------
530
531- Fixed a security vulnerability in the openssl plugin which was reported by
532 Kevin Wojtysiak. The vulnerability has been registered as CVE-2013-2944.
533 Before the fix, if the openssl plugin's ECDSA signature verification was used,
534 due to a misinterpretation of the error code returned by the OpenSSL
535 ECDSA_verify() function, an empty or zeroed signature was accepted as a
536 legitimate one.
537
538- The handling of a couple of other non-security relevant openssl return codes
539 was fixed as well.
540
541- The tnc_ifmap plugin now publishes virtual IPv4 and IPv6 addresses via its
542 TCG TNC IF-MAP 2.1 interface.
543
544- The charon.initiator_only option causes charon to ignore IKE initiation
545 requests.
546
bec5bf02
AS
547- The openssl plugin can now use the openssl-fips library.
548
2e12fc4b 549
d69eb037
TB
550strongswan-5.0.3
551----------------
552
553- The new ipseckey plugin enables authentication based on trustworthy public
554 keys stored as IPSECKEY resource records in the DNS and protected by DNSSEC.
555 To do so it uses a DNSSEC enabled resolver, like the one provided by the new
556 unbound plugin, which is based on libldns and libunbound. Both plugins were
557 created by Reto Guadagnini.
558
1fc609fe
AS
559- Implemented the TCG TNC IF-IMV 1.4 draft making access requestor identities
560 available to an IMV. The OS IMV stores the AR identity together with the
561 device ID in the attest database.
562
563- The openssl plugin now uses the AES-NI accelerated version of AES-GCM
564 if the hardware supports it.
7a93844f 565
96776d6f
MW
566- The eap-radius plugin can now assign virtual IPs to IKE clients using the
567 Framed-IP-Address attribute by using the "%radius" named pool in the
568 rightsourceip ipsec.conf option. Cisco Banner attributes are forwarded to
569 Unity-capable IKEv1 clients during mode config. charon now sends Interim
570 Accounting updates if requested by the RADIUS server, reports
571 sent/received packets in Accounting messages, and adds a Terminate-Cause
572 to Accounting-Stops.
573
574- The recently introduced "ipsec listcounters" command can report connection
575 specific counters by passing a connection name, and global or connection
576 counters can be reset by the "ipsec resetcounters" command.
577
578- The strongSwan libpttls library provides an experimental implementation of
579 PT-TLS (RFC 6876), a Posture Transport Protocol over TLS.
580
581- The charon systime-fix plugin can disable certificate lifetime checks on
582 embedded systems if the system time is obviously out of sync after bootup.
583 Certificates lifetimes get checked once the system time gets sane, closing
584 or reauthenticating connections using expired certificates.
585
586- The "ikedscp" ipsec.conf option can set DiffServ code points on outgoing
587 IKE packets.
7a93844f 588
e34666a4
TB
589- The new xauth-noauth plugin allows to use basic RSA or PSK authentication with
590 clients that cannot be configured without XAuth authentication. The plugin
591 simply concludes the XAuth exchange successfully without actually performing
592 any authentication. Therefore, to use this backend it has to be selected
593 explicitly with rightauth2=xauth-noauth.
594
db50a35a
RB
595- The new charon-tkm IKEv2 daemon delegates security critical operations to a
596 separate process. This has the benefit that the network facing daemon has no
597 knowledge of keying material used to protect child SAs. Thus subverting
598 charon-tkm does not result in the compromise of cryptographic keys.
599 The extracted functionality has been implemented from scratch in a minimal TCB
600 (trusted computing base) in the Ada programming language. Further information
601 can be found at http://www.codelabs.ch/tkm/.
602
c2a5e7bc
AS
603strongswan-5.0.2
604----------------
605
606- Implemented all IETF Standard PA-TNC attributes and an OS IMC/IMV
607 pair using them to transfer operating system information.
608
a19d5913
MW
609- The new "ipsec listcounters" command prints a list of global counter values
610 about received and sent IKE messages and rekeyings.
611
343e9989
MW
612- A new lookip plugin can perform fast lookup of tunnel information using a
613 clients virtual IP and can send notifications about established or deleted
614 tunnels. The "ipsec lookip" command can be used to query such information
615 or receive notifications.
616
ecdd5aed
MW
617- The new error-notify plugin catches some common error conditions and allows
618 an external application to receive notifications for them over a UNIX socket.
619
6910e5c7
MW
620- IKE proposals can now use a PRF algorithm different to that defined for
621 integrity protection. If an algorithm with a "prf" prefix is defined
622 explicitly (such as prfsha1 or prfsha256), no implicit PRF algorithm based on
623 the integrity algorithm is added to the proposal.
c2a5e7bc 624
8fc7bbc6
MW
625- The pkcs11 plugin can now load leftcert certificates from a smartcard for a
626 specific ipsec.conf conn section and cacert CA certificates for a specific ca
627 section.
628
78b2a2b1
MW
629- The load-tester plugin gained additional options for certificate generation
630 and can load keys and multiple CA certificates from external files. It can
631 install a dedicated outer IP address for each tunnel and tunnel initiation
632 batches can be triggered and monitored externally using the
633 "ipsec load-tester" tool.
634
cc0cc3b5
MW
635- PKCS#7 container parsing has been modularized, and the openssl plugin
636 gained an alternative implementation to decrypt and verify such files.
637 In contrast to our own DER parser, OpenSSL can handle BER files, which is
638 required for interoperability of our scepclient with EJBCA.
639
f31b4180
TB
640- Support for the proprietary IKEv1 fragmentation extension has been added.
641 Fragments are always handled on receipt but only sent if supported by the peer
642 and if enabled with the new fragmentation ipsec.conf option.
643
0e0870ae
MW
644- IKEv1 in charon can now parse certificates received in PKCS#7 containers and
645 supports NAT traversal as used by Windows clients. Patches courtesy of
646 Volker Rümelin.
647
2f0441a3
MW
648- The new rdrand plugin provides a high quality / high performance random
649 source using the Intel rdrand instruction found on Ivy Bridge processors.
650
73791223
TB
651- The integration test environment was updated and now uses KVM and reproducible
652 guest images based on Debian.
653
1fc609fe 654
ecfd714c
AS
655strongswan-5.0.1
656----------------
657
6f93927b
AS
658- Introduced the sending of the standard IETF Assessment Result
659 PA-TNC attribute by all strongSwan Integrity Measurement Verifiers.
660
ecfd714c
AS
661- Extended PTS Attestation IMC/IMV pair to provide full evidence of
662 the Linux IMA measurement process. All pertinent file information
6f93927b 663 of a Linux OS can be collected and stored in an SQL database.
ecfd714c
AS
664
665- The PA-TNC and PB-TNC protocols can now process huge data payloads
666 >64 kB by distributing PA-TNC attributes over multiple PA-TNC messages
667 and these messages over several PB-TNC batches. As long as no
6f93927b 668 consolidated recommandation from all IMVs can be obtained, the TNC
ecfd714c
AS
669 server requests more client data by sending an empty SDATA batch.
670
804d702b
MW
671- The rightgroups2 ipsec.conf option can require group membership during
672 a second authentication round, for example during XAuth authentication
673 against a RADIUS server.
674
3423b3a8
MW
675- The xauth-pam backend can authenticate IKEv1 XAuth and Hybrid authenticated
676 clients against any PAM service. The IKEv2 eap-gtc plugin does not use
677 PAM directly anymore, but can use any XAuth backend to verify credentials,
678 including xauth-pam.
679
cc48f360
MW
680- The new unity plugin brings support for some parts of the IKEv1 Cisco Unity
681 Extension. As client, charon narrows traffic selectors to the received
682 Split-Include attributes and automatically installs IPsec bypass policies
683 for received Local-LAN attributes. As server, charon sends Split-Include
684 attributes for leftsubnet definitions containing multiple subnets to Unity-
685 aware clients.
686
cbe244a5
TB
687- An EAP-Nak payload is returned by clients if the gateway requests an EAP
688 method that the client does not support. Clients can also request a specific
689 EAP method by configuring that method with leftauth.
690
691- The eap-dynamic plugin handles EAP-Nak payloads returned by clients and uses
692 these to select a different EAP method supported/requested by the client.
693 The plugin initially requests the first registered method or the first method
694 configured with charon.plugins.eap-dynamic.preferred.
695
e76f3d0d
MW
696- The new left/rightdns options specify connection specific DNS servers to
697 request/respond in IKEv2 configuration payloads or IKEv2 mode config. leftdns
698 can be any (comma separated) combination of %config4 and %config6 to request
699 multiple servers, both for IPv4 and IPv6. rightdns takes a list of DNS server
700 IP addresses to return.
701
69e056a2
MW
702- The left/rightsourceip options now accept multiple addresses or pools.
703 leftsourceip can be any (comma separated) combination of %config4, %config6
704 or fixed IP addresses to request. rightsourceip accepts multiple explicitly
705 specified or referenced named pools.
706
707- Multiple connections can now share a single address pool when they use the
708 same definition in one of the rightsourceip pools.
709
4a025539
TB
710- The options charon.interfaces_ignore and charon.interfaces_use allow one to
711 configure the network interfaces used by the daemon.
712
713- The kernel-netlink plugin supports the charon.install_virtual_ip_on option,
714 which specifies the interface on which virtual IP addresses will be installed.
715 If it is not specified the current behavior of using the outbound interface
716 is preserved.
717
718- The kernel-netlink plugin tries to keep the current source address when
719 looking for valid routes to reach other hosts.
720
804d702b
MW
721- The autotools build has been migrated to use a config.h header. strongSwan
722 development headers will get installed during "make install" if
723 --with-dev-headers has been passed to ./configure.
724
725- All crypto primitives gained return values for most operations, allowing
726 crypto backends to fail, for example when using hardware accelerators.
ecfd714c 727
1fc609fe 728
d55c2404
TB
729strongswan-5.0.0
730----------------
731
794cdbc5
MW
732- The charon IKE daemon gained experimental support for the IKEv1 protocol.
733 Pluto has been removed from the 5.x series, and unless strongSwan is
734 configured with --disable-ikev1 or --disable-ikev2, charon handles both
735 keying protocols. The feature-set of IKEv1 in charon is almost on par with
736 pluto, but currently does not support AH or bundled AH+ESP SAs. Beside
737 RSA/ECDSA, PSK and XAuth, charon also supports the Hybrid authentication
738 mode. Informations for interoperability and migration is available at
739 http://wiki.strongswan.org/projects/strongswan/wiki/CharonPlutoIKEv1.
740
d55c2404
TB
741- Charon's bus_t has been refactored so that loggers and other listeners are
742 now handled separately. The single lock was previously cause for deadlocks
743 if extensive listeners, such as the one provided by the updown plugin, wanted
744 to acquire locks that were held by other threads which in turn tried to log
745 messages, and thus were waiting to acquire the same lock currently held by
746 the thread calling the listener.
747 The implemented changes also allow the use of a read/write-lock for the
748 loggers which increases performance if multiple loggers are registered.
749 Besides several interface changes this last bit also changes the semantics
750 for loggers as these may now be called by multiple threads at the same time.
751
ed7186cb
TB
752- Source routes are reinstalled if interfaces are reactivated or IP addresses
753 reappear.
754
f97c269e
TB
755- The thread pool (processor_t) now has more control over the lifecycle of
756 a job (see job.h for details). In particular, it now controls the destruction
757 of jobs after execution and the cancellation of jobs during shutdown. Due to
758 these changes the requeueing feature, previously available to callback_job_t
759 only, is now available to all jobs (in addition to a new rescheduling
760 feature).
761
5a6e5e0d
MW
762- In addition to trustchain key strength definitions for different public key
763 systems, the rightauth option now takes a list of signature hash algorithms
764 considered save for trustchain validation. For example, the setting
765 rightauth=rsa-2048-ecdsa-256-sha256-sha384-sha512 requires a trustchain
766 that uses at least RSA-2048 or ECDSA-256 keys and certificate signatures
767 using SHA-256 or better.
768
d55c2404 769
93d9a02e
TB
770strongswan-4.6.4
771----------------
772
773- Fixed a security vulnerability in the gmp plugin. If this plugin was used
774 for RSA signature verification an empty or zeroed signature was handled as
775 a legitimate one.
776
777- Fixed several issues with reauthentication and address updates.
778
779
c224f765
AS
780strongswan-4.6.3
781----------------
782
783- The tnc-pdp plugin implements a RADIUS server interface allowing
784 a strongSwan TNC server to act as a Policy Decision Point.
785
4bc7577d
MW
786- The eap-radius authentication backend enforces Session-Timeout attributes
787 using RFC4478 repeated authentication and acts upon RADIUS Dynamic
788 Authorization extensions, RFC 5176. Currently supported are disconnect
789 requests and CoA messages containing a Session-Timeout.
790
791- The eap-radius plugin can forward arbitrary RADIUS attributes from and to
792 clients using custom IKEv2 notify payloads. The new radattr plugin reads
793 attributes to include from files and prints received attributes to the
794 console.
c224f765
AS
795
796- Added support for untruncated MD5 and SHA1 HMACs in ESP as used in
797 RFC 4595.
798
d7590217
TB
799- The cmac plugin implements the AES-CMAC-96 and AES-CMAC-PRF-128 algorithms
800 as defined in RFC 4494 and RFC 4615, respectively.
801
4e2e77d5 802- The resolve plugin automatically installs nameservers via resolvconf(8),
a281494a 803 if it is installed, instead of modifying /etc/resolv.conf directly.
c224f765 804
5f1931ad
AS
805- The IKEv2 charon daemon supports now raw RSA public keys in RFC 3110
806 DNSKEY and PKCS#1 file format.
807
808
60e99b37
AS
809strongswan-4.6.2
810----------------
811
812- Upgraded the TCG IF-IMC and IF-IMV C API to the upcoming version 1.3
813 which supports IF-TNCCS 2.0 long message types, the exclusive flags
814 and multiple IMC/IMV IDs. Both the TNC Client and Server as well as
815 the "Test", "Scanner", and "Attestation" IMC/IMV pairs were updated.
816
817- Fully implemented the "TCG Attestation PTS Protocol: Binding to IF-M"
818 standard (TLV-based messages only). TPM-based remote attestation of
de4a0c83
AS
819 Linux IMA (Integrity Measurement Architecture) possible. Measurement
820 reference values are automatically stored in an SQLite database.
60e99b37 821
a345aa26
MW
822- The EAP-RADIUS authentication backend supports RADIUS accounting. It sends
823 start/stop messages containing Username, Framed-IP and Input/Output-Octets
824 attributes and has been tested against FreeRADIUS and Microsoft NPS.
60e99b37 825
de4a0c83
AS
826- Added support for PKCS#8 encoded private keys via the libstrongswan
827 pkcs8 plugin. This is the default format used by some OpenSSL tools since
828 version 1.0.0 (e.g. openssl req with -keyout).
dcefa267 829
a8958012
MW
830- Added session resumption support to the strongSwan TLS stack.
831
de4a0c83 832
acb92cb4
AS
833strongswan-4.6.1
834----------------
835
836- Because of changing checksums before and after installation which caused
837 the integrity tests to fail we avoided directly linking libsimaka, libtls and
838 libtnccs to those libcharon plugins which make use of these dynamic libraries.
18f85b66
AS
839 Instead we linked the libraries to the charon daemon. Unfortunately Ubuntu
840 11.10 activated the --as-needed ld option which discards explicit links
841 to dynamic libraries that are not actually used by the charon daemon itself,
842 thus causing failures during the loading of the plugins which depend on these
843 libraries for resolving external symbols.
acb92cb4
AS
844
845- Therefore our approach of computing integrity checksums for plugins had to be
846 changed radically by moving the hash generation from the compilation to the
847 post-installation phase.
5ed3e3a7 848
acb92cb4 849
92a1b234 850strongswan-4.6.0
5a2e2e0b
AS
851----------------
852
37276728
MW
853- The new libstrongswan certexpire plugin collects expiration information of
854 all used certificates and exports them to CSV files. It either directly
855 exports them or uses cron style scheduling for batch exports.
856
857- starter passes unresolved hostnames to charon, allowing it to do name
858 resolution not before the connection attempt. This is especially useful with
859 connections between hosts using dynamic IP addresses. Thanks to Mirko Parthey
860 for the initial patch.
861
5fd8e530
TB
862- The android plugin can now be used without the Android frontend patch and
863 provides DNS server registration and logging to logcat.
864
865- Pluto and starter (plus stroke and whack) have been ported to Android.
866
602ee58e
TB
867- Support for ECDSA private and public key operations has been added to the
868 pkcs11 plugin. The plugin now also provides DH and ECDH via PKCS#11 and can
869 use tokens as random number generators (RNG). By default only private key
870 operations are enabled, more advanced features have to be enabled by their
871 option in strongswan.conf. This also applies to public key operations (even
872 for keys not stored on the token) which were enabled by default before.
873
37276728
MW
874- The libstrongswan plugin system now supports detailed plugin dependencies.
875 Many plugins have been extended to export its capabilities and requirements.
876 This allows the plugin loader to resolve plugin loading order automatically,
877 and in future releases, to dynamically load the required features on demand.
878 Existing third party plugins are source (but not binary) compatible if they
879 properly initialize the new get_features() plugin function to NULL.
880
fd81ac05
AS
881- The tnc-ifmap plugin implements a TNC IF-MAP 2.0 client which can deliver
882 metadata about IKE_SAs via a SOAP interface to a MAP server. The tnc-ifmap
883 plugin requires the Apache Axis2/C library.
884
37276728 885
5d179d19
AS
886strongswan-4.5.3
887----------------
888
a7edbd21 889- Our private libraries (e.g. libstrongswan) are not installed directly in
b18a697a
AS
890 prefix/lib anymore. Instead a subdirectory is used (prefix/lib/ipsec/ by
891 default). The plugins directory is also moved from libexec/ipsec/ to that
a7edbd21
TB
892 directory.
893
b18a697a
AS
894- The dynamic IMC/IMV libraries were moved from the plugins directory to
895 a new imcvs directory in the prefix/lib/ipsec/ subdirectory.
896
107ea60f
TB
897- Job priorities were introduced to prevent thread starvation caused by too
898 many threads handling blocking operations (such as CRL fetching). Refer to
899 strongswan.conf(5) for details.
900
901- Two new strongswan.conf options allow to fine-tune performance on IKEv2
902 gateways by dropping IKE_SA_INIT requests on high load.
903
f8799170 904- IKEv2 charon daemon supports start PASS and DROP shunt policies
b18a697a 905 preventing traffic to go through IPsec connections. Installation of the
107ea60f
TB
906 shunt policies either via the XFRM netfilter or PFKEYv2 IPsec kernel
907 interfaces.
f8799170 908
93095183
TB
909- The history of policies installed in the kernel is now tracked so that e.g.
910 trap policies are correctly updated when reauthenticated SAs are terminated.
911
b18a697a
AS
912- IMC/IMV Scanner pair implementing the RFC 5792 PA-TNC (IF-M) protocol.
913 Using "netstat -l" the IMC scans open listening ports on the TNC client
914 and sends a port list to the IMV which based on a port policy decides if
915 the client is admitted to the network.
916 (--enable-imc-scanner/--enable-imv-scanner).
917
918- IMC/IMV Test pair implementing the RFC 5792 PA-TNC (IF-M) protocol.
5d179d19
AS
919 (--enable-imc-test/--enable-imv-test).
920
4876f896
MW
921- The IKEv2 close action does not use the same value as the ipsec.conf dpdaction
922 setting, but the value defined by its own closeaction keyword. The action
923 is triggered if the remote peer closes a CHILD_SA unexpectedly.
5d179d19 924
5a2e2e0b 925
6f2378c1
AS
926strongswan-4.5.2
927----------------
928
320e98c2
MW
929- The whitelist plugin for the IKEv2 daemon maintains an in-memory identity
930 whitelist. Any connection attempt of peers not whitelisted will get rejected.
931 The 'ipsec whitelist' utility provides a simple command line frontend for
932 whitelist administration.
933
92ebb7c5 934- The duplicheck plugin provides a specialized form of duplicate checking,
5832d505 935 doing a liveness check on the old SA and optionally notify a third party
92ebb7c5
MW
936 application about detected duplicates.
937
938- The coupling plugin permanently couples two or more devices by limiting
939 authentication to previously used certificates.
940
6f2378c1
AS
941- In the case that the peer config and child config don't have the same name
942 (usually in SQL database defined connections), ipsec up|route <peer config>
943 starts|routes all associated child configs and ipsec up|route <child config>
944 only starts|routes the specific child config.
945
6ca05fe2
AS
946- fixed the encoding and parsing of X.509 certificate policy statements (CPS).
947
1ee7440b
AS
948- Duncan Salerno contributed the eap-sim-pcsc plugin implementing a
949 pcsc-lite based SIM card backend.
950
951- The eap-peap plugin implements the EAP PEAP protocol. Interoperates
2778b664 952 successfully with a FreeRADIUS server and Windows 7 Agile VPN clients.
1ee7440b 953
cf6ca6d7
MW
954- The IKEv2 daemon charon rereads strongswan.conf on SIGHUP and instructs
955 all plugins to reload. Currently only the eap-radius and the attr plugins
956 support configuration reloading.
957
d3d21c29
MW
958- Added userland support to the IKEv2 daemon for Extended Sequence Numbers
959 support coming with Linux 2.6.39. To enable ESN on a connection, add
960 the 'esn' keyword to the proposal. The default proposal uses 32-bit sequence
961 numbers only ('noesn'), and the same value is used if no ESN mode is
962 specified. To negotiate ESN support with the peer, include both, e.g.
963 esp=aes128-sha1-esn-noesn.
964
965- In addition to ESN, Linux 2.6.39 gained support for replay windows larger
966 than 32 packets. The new global strongswan.conf option 'charon.replay_window'
967 configures the size of the replay window, in packets.
968
6f2378c1 969
41ba5ce7
AS
970strongswan-4.5.1
971----------------
972
1b7e081b
AS
973- Sansar Choinyambuu implemented the RFC 5793 Posture Broker Protocol (BP)
974 compatible with Trusted Network Connect (TNC). The TNCCS 2.0 protocol
5cdaafef 975 requires the tnccs_20, tnc_imc and tnc_imv plugins but does not depend
1b7e081b
AS
976 on the libtnc library. Any available IMV/IMC pairs conforming to the
977 Trusted Computing Group's TNC-IF-IMV/IMC 1.2 interface specification
e44817df 978 can be loaded via /etc/tnc_config.
1b7e081b 979
5cdaafef
AS
980- Re-implemented the TNCCS 1.1 protocol by using the tnc_imc and tnc_imv
981 in place of the external libtnc library.
982
983- The tnccs_dynamic plugin loaded on a TNC server in addition to the
984 tnccs_11 and tnccs_20 plugins, dynamically detects the IF-TNCCS
985 protocol version used by a TNC client and invokes an instance of
986 the corresponding protocol stack.
987
41ba5ce7
AS
988- IKE and ESP proposals can now be stored in an SQL database using a
989 new proposals table. The start_action field in the child_configs
990 tables allows the automatic starting or routing of connections stored
991 in an SQL database.
992
1b7e081b
AS
993- The new certificate_authorities and certificate_distribution_points
994 tables make it possible to store CRL and OCSP Certificate Distribution
995 points in an SQL database.
996
ae09bc62
TB
997- The new 'include' statement allows to recursively include other files in
998 strongswan.conf. Existing sections and values are thereby extended and
999 replaced, respectively.
1000
1001- Due to the changes in the parser for strongswan.conf, the configuration
1002 syntax for the attr plugin has changed. Previously, it was possible to
1003 specify multiple values of a specific attribute type by adding multiple
1004 key/value pairs with the same key (e.g. dns) to the plugins.attr section.
1005 Because values with the same key now replace previously defined values
1006 this is not possible anymore. As an alternative, multiple values can be
1007 specified by separating them with a comma (e.g. dns = 1.2.3.4, 2.3.4.5).
1008
840e7044
AS
1009- ipsec listalgs now appends (set in square brackets) to each crypto
1010 algorithm listed the plugin that registered the function.
1011
e44817df
MW
1012- Traffic Flow Confidentiality padding supported with Linux 2.6.38 can be used
1013 by the IKEv2 daemon. The ipsec.conf 'tfc' keyword pads all packets to a given
1014 boundary, the special value '%mtu' pads all packets to the path MTU.
1015
78a547c9
MW
1016- The new af-alg plugin can use various crypto primitives of the Linux Crypto
1017 API using the AF_ALG interface introduced with 2.6.38. This removes the need
1018 for additional userland implementations of symmetric cipher, hash, hmac and
1019 xcbc algorithms.
44582075 1020
41ed0294 1021- The IKEv2 daemon supports the INITIAL_CONTACT notify as initiator and
983a5e88
MW
1022 responder. The notify is sent when initiating configurations with a unique
1023 policy, set in ipsec.conf via the global 'uniqueids' option.
41ed0294 1024
f0783464
MW
1025- The conftest conformance testing framework enables the IKEv2 stack to perform
1026 many tests using a distinct tool and configuration frontend. Various hooks
1027 can alter reserved bits, flags, add custom notifies and proposals, reorder
1028 or drop messages and much more. It is enabled using the --enable-conftest
1029 ./configure switch.
1030
77eee25f 1031- The new libstrongswan constraints plugin provides advanced X.509 constraint
cf95d292 1032 checking. In addition to X.509 pathLen constraints, the plugin checks for
77eee25f
MW
1033 nameConstraints and certificatePolicies, including policyMappings and
1034 policyConstraints. The x509 certificate plugin and the pki tool have been
96c4addc
MW
1035 enhanced to support these extensions. The new left/rightcertpolicy ipsec.conf
1036 connection keywords take OIDs a peer certificate must have.
1037
1038- The left/rightauth ipsec.conf keywords accept values with a minimum strength
1039 for trustchain public keys in bits, such as rsa-2048 or ecdsa-256.
77eee25f 1040
fb1e7df1
MW
1041- The revocation and x509 libstrongswan plugins and the pki tool gained basic
1042 support for delta CRLs.
1043
5cdaafef 1044
44582075
MW
1045strongswan-4.5.0
1046----------------
1047
b14923ec
AS
1048- IMPORTANT: the default keyexchange mode 'ike' is changing with release 4.5
1049 from 'ikev1' to 'ikev2', thus commemorating the five year anniversary of the
ac544be2 1050 IKEv2 RFC 4306 and its mature successor RFC 5996. The time has definitively
b14923ec 1051 come for IKEv1 to go into retirement and to cede its place to the much more
ac544be2 1052 robust, powerful and versatile IKEv2 protocol!
b14923ec 1053
44582075
MW
1054- Added new ctr, ccm and gcm plugins providing Counter, Counter with CBC-MAC
1055 and Galois/Counter Modes based on existing CBC implementations. These
1056 new plugins bring support for AES and Camellia Counter and CCM algorithms
1057 and the AES GCM algorithms for use in IKEv2.
1058
84c9bc42
MW
1059- The new pkcs11 plugin brings full Smartcard support to the IKEv2 daemon and
1060 the pki utility using one or more PKCS#11 libraries. It currently supports
61df42cc 1061 RSA private and public key operations and loads X.509 certificates from
84c9bc42
MW
1062 tokens.
1063
a782b52f
MW
1064- Implemented a general purpose TLS stack based on crypto and credential
1065 primitives of libstrongswan. libtls supports TLS versions 1.0, 1.1 and 1.2,
1066 ECDHE-ECDSA/RSA, DHE-RSA and RSA key exchange algorithms and RSA/ECDSA based
1067 client authentication.
1068
1069- Based on libtls, the eap-tls plugin brings certificate based EAP
1070 authentication for client and server. It is compatible to Windows 7 IKEv2
61df42cc 1071 Smartcard authentication and the OpenSSL based FreeRADIUS EAP-TLS backend.
a782b52f 1072
8a1353fc
AS
1073- Implemented the TNCCS 1.1 Trusted Network Connect protocol using the
1074 libtnc library on the strongSwan client and server side via the tnccs_11
1075 plugin and optionally connecting to a TNC@FHH-enhanced FreeRADIUS AAA server.
1076 Depending on the resulting TNC Recommendation, strongSwan clients are granted
1077 access to a network behind a strongSwan gateway (allow), are put into a
ac544be2 1078 remediation zone (isolate) or are blocked (none), respectively. Any number
8a1353fc
AS
1079 of Integrity Measurement Collector/Verifier pairs can be attached
1080 via the tnc-imc and tnc-imv charon plugins.
1081
b3cabd1f
TB
1082- The IKEv1 daemon pluto now uses the same kernel interfaces as the IKEv2
1083 daemon charon. As a result of this, pluto now supports xfrm marks which
1084 were introduced in charon with 4.4.1.
1085
1086- Applets for Maemo 5 (Nokia) allow to easily configure and control IKEv2
1087 based VPN connections with EAP authentication on supported devices.
1088
18a4f865
MW
1089- The RADIUS plugin eap-radius now supports multiple RADIUS servers for
1090 redundant setups. Servers are selected by a defined priority, server load and
1091 availability.
1092
1093- The simple led plugin controls hardware LEDs through the Linux LED subsystem.
1094 It currently shows activity of the IKE daemon and is a good example how to
1095 implement a simple event listener.
1096
b3cabd1f
TB
1097- Improved MOBIKE behavior in several corner cases, for instance, if the
1098 initial responder moves to a different address.
1099
1100- Fixed left-/rightnexthop option, which was broken since 4.4.0.
1101
3f84e2d6
AS
1102- Fixed a bug not releasing a virtual IP address to a pool if the XAUTH
1103 identity was different from the IKE identity.
1104
f6032361
AS
1105- Fixed the alignment of ModeConfig messages on 4-byte boundaries in the
1106 case where the attributes are not a multiple of 4 bytes (e.g. Cisco's
1107 UNITY_BANNER).
1108
1109- Fixed the interoperability of the socket_raw and socket_default
1110 charon plugins.
1111
3f84e2d6
AS
1112- Added man page for strongswan.conf
1113
a782b52f 1114
03b5e4d8
AS
1115strongswan-4.4.1
1116----------------
1117
ec40c02a 1118- Support of xfrm marks in IPsec SAs and IPsec policies introduced
b22bb9f2
AS
1119 with the Linux 2.6.34 kernel. For details see the example scenarios
1120 ikev2/nat-two-rw-mark, ikev2/rw-nat-mark-in-out and ikev2/net2net-psk-dscp.
ec40c02a 1121
b22bb9f2 1122- The PLUTO_MARK_IN and PLUTO_ESP_ENC environment variables can be used
b59340a2
AS
1123 in a user-specific updown script to set marks on inbound ESP or
1124 ESP_IN_UDP packets.
e87b78c6 1125
3561cc4b
AS
1126- The openssl plugin now supports X.509 certificate and CRL functions.
1127
e9448cfc 1128- OCSP/CRL checking in IKEv2 has been moved to the revocation plugin, enabled
b59340a2 1129 by default. Plase update manual load directives in strongswan.conf.
e9448cfc
MW
1130
1131- RFC3779 ipAddrBlock constraint checking has been moved to the addrblock
1132 plugin, disabled by default. Enable it and update manual load directives
1133 in strongswan.conf, if required.
1134
7f3a9468
MW
1135- The pki utility supports CRL generation using the --signcrl command.
1136
1137- The ipsec pki --self, --issue and --req commands now support output in
1138 PEM format using the --outform pem option.
1139
03b5e4d8
AS
1140- The major refactoring of the IKEv1 Mode Config functionality now allows
1141 the transport and handling of any Mode Config attribute.
1142
e87b78c6 1143- The RADIUS proxy plugin eap-radius now supports multiple servers. Configured
b59340a2
AS
1144 servers are chosen randomly, with the option to prefer a specific server.
1145 Non-responding servers are degraded by the selection process.
e87b78c6 1146
c5c6f9b6
AS
1147- The ipsec pool tool manages arbitrary configuration attributes stored
1148 in an SQL database. ipsec pool --help gives the details.
1149
fe2434cf
MW
1150- The new eap-simaka-sql plugin acts as a backend for EAP-SIM and EAP-AKA,
1151 reading triplets/quintuplets from an SQL database.
1152
c8bd06c7
MW
1153- The High Availability plugin now supports a HA enabled in-memory address
1154 pool and Node reintegration without IKE_SA rekeying. The latter allows
1155 clients without IKE_SA rekeying support to keep connected during
1156 reintegration. Additionally, many other issues have been fixed in the ha
1157 plugin.
1c1f132a 1158
c5c921bf
MW
1159- Fixed a potential remote code execution vulnerability resulting from
1160 the misuse of snprintf(). The vulnerability is exploitable by
1161 unauthenticated users.
1162
03b5e4d8 1163
00c60592
MW
1164strongswan-4.4.0
1165----------------
1166
d101a61f
MW
1167- The IKEv2 High Availability plugin has been integrated. It provides
1168 load sharing and failover capabilities in a cluster of currently two nodes,
1169 based on an extend ClusterIP kernel module. More information is available at
1170 http://wiki.strongswan.org/projects/strongswan/wiki/HighAvailability.
9235edc2 1171 The development of the High Availability functionality was sponsored by
d101a61f
MW
1172 secunet Security Networks AG.
1173
dd8cb2b0
AS
1174- Added IKEv1 and IKEv2 configuration support for the AES-GMAC
1175 authentication-only ESP cipher. Our aes_gmac kernel patch or a Linux
1176 2.6.34 kernel is required to make AES-GMAC available via the XFRM
1177 kernel interface.
1178
4590260b
MW
1179- Added support for Diffie-Hellman groups 22, 23 and 24 to the gmp, gcrypt
1180 and openssl plugins, usable by both pluto and charon. The new proposal
1181 keywords are modp1024s160, modp2048s224 and modp2048s256. Thanks to Joy Latten
1182 from IBM for his contribution.
1183
9235edc2
AS
1184- The IKEv1 pluto daemon supports RAM-based virtual IP pools using
1185 the rightsourceip directive with a subnet from which addresses
1186 are allocated.
1187
d6457833
AS
1188- The ipsec pki --gen and --pub commands now allow the output of
1189 private and public keys in PEM format using the --outform pem
1190 command line option.
1191
2d097a0b
MW
1192- The new DHCP plugin queries virtual IP addresses for clients from a DHCP
1193 server using broadcasts, or a defined server using the
1194 charon.plugins.dhcp.server strongswan.conf option. DNS/WINS server information
1195 is additionally served to clients if the DHCP server provides such
1196 information. The plugin is used in ipsec.conf configurations having
1197 rightsourceip set to %dhcp.
1198
6d6994c6
MW
1199- A new plugin called farp fakes ARP responses for virtual IP addresses
1200 handed out to clients from the IKEv2 daemon charon. The plugin lets a
89bf11d2 1201 road-warrior act as a client on the local LAN if it uses a virtual IP
6d6994c6
MW
1202 from the responders subnet, e.g. acquired using the DHCP plugin.
1203
00c60592
MW
1204- The existing IKEv2 socket implementations have been migrated to the
1205 socket-default and the socket-raw plugins. The new socket-dynamic plugin
1206 binds sockets dynamically to ports configured via the left-/rightikeport
1207 ipsec.conf connection parameters.
1208
3e6b50ed
MW
1209- The android charon plugin stores received DNS server information as "net.dns"
1210 system properties, as used by the Android platform.
00c60592 1211
d6457833 1212
4c68a85a
AS
1213strongswan-4.3.6
1214----------------
1215
cdad91de 1216- The IKEv2 daemon supports RFC 3779 IP address block constraints
e98a4d80
AS
1217 carried as a critical X.509v3 extension in the peer certificate.
1218
a7155606
AS
1219- The ipsec pool --add|del dns|nbns command manages DNS and NBNS name
1220 server entries that are sent via the IKEv1 Mode Config or IKEv2
1221 Configuration Payload to remote clients.
1222
f721e0fb
AS
1223- The Camellia cipher can be used as an IKEv1 encryption algorithm.
1224
4c68a85a
AS
1225- The IKEv1 and IKEV2 daemons now check certificate path length constraints.
1226
909c0c3d
MW
1227- The new ipsec.conf conn option "inactivity" closes a CHILD_SA if no traffic
1228 was sent or received within the given interval. To close the complete IKE_SA
1229 if its only CHILD_SA was inactive, set the global strongswan.conf option
aa9eeb5d
MW
1230 "charon.inactivity_close_ike" to yes.
1231
44e41c4c
AS
1232- More detailed IKEv2 EAP payload information in debug output
1233
2b2c69e9 1234- IKEv2 EAP-SIM and EAP-AKA share joint libsimaka library
44e41c4c 1235
52fd0ef9
MW
1236- Added required userland changes for proper SHA256 and SHA384/512 in ESP that
1237 will be introduced with Linux 2.6.33. The "sha256"/"sha2_256" keyword now
1238 configures the kernel with 128 bit truncation, not the non-standard 96
1239 bit truncation used by previous releases. To use the old 96 bit truncation
1240 scheme, the new "sha256_96" proposal keyword has been introduced.
4c68a85a 1241
2b2c69e9
MW
1242- Fixed IPComp in tunnel mode, stripping out the duplicated outer header. This
1243 change makes IPcomp tunnel mode connections incompatible with previous
1244 releases; disable compression on such tunnels.
1245
6ec949e0
MW
1246- Fixed BEET mode connections on recent kernels by installing SAs with
1247 appropriate traffic selectors, based on a patch by Michael Rossberg.
1248
cdad91de
MW
1249- Using extensions (such as BEET mode) and crypto algorithms (such as twofish,
1250 serpent, sha256_96) allocated in the private use space now require that we
1251 know its meaning, i.e. we are talking to strongSwan. Use the new
1252 "charon.send_vendor_id" option in strongswan.conf to let the remote peer know
1253 this is the case.
1254
aca9f9ab
MW
1255- Experimental support for draft-eronen-ipsec-ikev2-eap-auth, where the
1256 responder omits public key authentication in favor of a mutual authentication
1257 method. To enable EAP-only authentication, set rightauth=eap on the responder
1258 to rely only on the MSK constructed AUTH payload. This not-yet standardized
1259 extension requires the strongSwan vendor ID introduced above.
1260
0a975307
AS
1261- The IKEv1 daemon ignores the Juniper SRX notification type 40001, thus
1262 allowing interoperability.
1263
1264
b6b90b68
MW
1265strongswan-4.3.5
1266----------------
1267
628f023d
AS
1268- The IKEv1 pluto daemon can now use SQL-based address pools to deal out
1269 virtual IP addresses as a Mode Config server. The pool capability has been
1270 migrated from charon's sql plugin to a new attr-sql plugin which is loaded
b42bfc79 1271 by libstrongswan and which can be used by both daemons either with a SQLite
628f023d
AS
1272 or MySQL database and the corresponding plugin.
1273
b42bfc79
MW
1274- Plugin names have been streamlined: EAP plugins now have a dash after eap
1275 (e.g. eap-sim), as it is used with the --enable-eap-sim ./configure option.
1276 Plugin configuration sections in strongswan.conf now use the same name as the
1277 plugin itself (i.e. with a dash). Make sure to update "load" directives and
1278 the affected plugin sections in existing strongswan.conf files.
1279
d245f5cf
AS
1280- The private/public key parsing and encoding has been split up into
1281 separate pkcs1, pgp, pem and dnskey plugins. The public key implementation
1282 plugins gmp, gcrypt and openssl can all make use of them.
b6b90b68 1283
55b045ab
MW
1284- The EAP-AKA plugin can use different backends for USIM/quintuplet
1285 calculations, very similar to the EAP-SIM plugin. The existing 3GPP2 software
1286 implementation has been migrated to a separate plugin.
1287
d245f5cf 1288- The IKEv2 daemon charon gained basic PGP support. It can use locally installed
b6b90b68
MW
1289 peer certificates and can issue signatures based on RSA private keys.
1290
1291- The new 'ipsec pki' tool provides a set of commands to maintain a public
1292 key infrastructure. It currently supports operations to create RSA and ECDSA
1293 private/public keys, calculate fingerprints and issue or verify certificates.
1294
1295- Charon uses a monotonic time source for statistics and job queueing, behaving
1296 correctly if the system time changes (e.g. when using NTP).
1297
1298- In addition to time based rekeying, charon supports IPsec SA lifetimes based
1299 on processed volume or number of packets. They new ipsec.conf paramaters
1300 'lifetime' (an alias to 'keylife'), 'lifebytes' and 'lifepackets' handle
1301 SA timeouts, while the parameters 'margintime' (an alias to rekeymargin),
1302 'marginbytes' and 'marginpackets' trigger the rekeying before a SA expires.
1303 The existing parameter 'rekeyfuzz' affects all margins.
1304
85af7a89
MW
1305- If no CA/Gateway certificate is specified in the NetworkManager plugin,
1306 charon uses a set of trusted root certificates preinstalled by distributions.
1307 The directory containing CA certificates can be specified using the
1308 --with-nm-ca-dir=path configure option.
1309
b80fa9ca 1310- Fixed the encoding of the Email relative distinguished name in left|rightid
509f70c1 1311 statements.
b80fa9ca 1312
509f70c1
AS
1313- Fixed the broken parsing of PKCS#7 wrapped certificates by the pluto daemon.
1314
1315- Fixed smartcard-based authentication in the pluto daemon which was broken by
1316 the ECDSA support introduced with the 4.3.2 release.
1317
cea4bd8f
AS
1318- A patch contributed by Heiko Hund fixes mixed IPv6 in IPv4 and vice versa
1319 tunnels established with the IKEv1 pluto daemon.
1320
509f70c1
AS
1321- The pluto daemon now uses the libstrongswan x509 plugin for certificates and
1322 CRls and the struct id type was replaced by identification_t used by charon
1323 and the libstrongswan library.
18060241 1324
85af7a89 1325
430dd08a
AS
1326strongswan-4.3.4
1327----------------
1328
1329- IKEv2 charon daemon ported to FreeBSD and Mac OS X. Installation details can
1330 be found on wiki.strongswan.org.
1331
1332- ipsec statusall shows the number of bytes transmitted and received over
1333 ESP connections configured by the IKEv2 charon daemon.
1334
1335- The IKEv2 charon daemon supports include files in ipsec.secrets.
1336
1337
1c7f456a
AS
1338strongswan-4.3.3
1339----------------
1340
aa74d705
AS
1341- The configuration option --enable-integrity-test plus the strongswan.conf
1342 option libstrongswan.integrity_test = yes activate integrity tests
1343 of the IKE daemons charon and pluto, libstrongswan and all loaded
1344 plugins. Thus dynamic library misconfigurations and non-malicious file
1345 manipulations can be reliably detected.
1346
1c7f456a
AS
1347- The new default setting libstrongswan.ecp_x_coordinate_only=yes allows
1348 IKEv1 interoperability with MS Windows using the ECP DH groups 19 and 20.
1349
1350- The IKEv1 pluto daemon now supports the AES-CCM and AES-GCM ESP
1351 authenticated encryption algorithms.
1352
aa74d705
AS
1353- The IKEv1 pluto daemon now supports V4 OpenPGP keys.
1354
1355- The RDN parser vulnerability discovered by Orange Labs research team
1356 was not completely fixed in version 4.3.2. Some more modifications
1357 had to be applied to the asn1_length() function to make it robust.
1358
1c7f456a 1359
80c0710c
MW
1360strongswan-4.3.2
1361----------------
1362
1363- The new gcrypt plugin provides symmetric cipher, hasher, RNG, Diffie-Hellman
1364 and RSA crypto primitives using the LGPL licensed GNU gcrypt library.
1365
1366- libstrongswan features an integrated crypto selftest framework for registered
1367 algorithms. The test-vector plugin provides a first set of test vectors and
1368 allows pluto and charon to rely on tested crypto algorithms.
1369
b32af120
AS
1370- pluto can now use all libstrongswan plugins with the exception of x509 and xcbc.
1371 Thanks to the openssl plugin, the ECP Diffie-Hellman groups 19, 20, 21, 25, and
1372 26 as well as ECDSA-256, ECDSA-384, and ECDSA-521 authentication can be used
1373 with IKEv1.
126f2130
AS
1374
1375- Applying their fuzzing tool, the Orange Labs vulnerability research team found
1376 another two DoS vulnerabilities, one in the rather old ASN.1 parser of Relative
1377 Distinguished Names (RDNs) and a second one in the conversion of ASN.1 UTCTIME
1378 and GENERALIZEDTIME strings to a time_t value.
b6b90b68 1379
b32af120 1380
3bf7c249
MW
1381strongswan-4.3.1
1382----------------
1383
1384- The nm plugin now passes DNS/NBNS server information to NetworkManager,
09dbca9f 1385 allowing a gateway administrator to set DNS/NBNS configuration on clients
3bf7c249
MW
1386 dynamically.
1387
09dbca9f
MW
1388- The nm plugin also accepts CA certificates for gateway authentication. If
1389 a CA certificate is configured, strongSwan uses the entered gateway address
1390 as its idenitity, requiring the gateways certificate to contain the same as
1391 subjectAltName. This allows a gateway administrator to deploy the same
1392 certificates to Windows 7 and NetworkManager clients.
047b2e42 1393
050cc582
AS
1394- The command ipsec purgeike deletes IKEv2 SAs that don't have a CHILD SA.
1395 The command ipsec down <conn>{n} deletes CHILD SA instance n of connection
1396 <conn> whereas ipsec down <conn>{*} deletes all CHILD SA instances.
1397 The command ipsec down <conn>[n] deletes IKE SA instance n of connection
1398 <conn> plus dependent CHILD SAs whereas ipsec down <conn>[*] deletes all
1399 IKE SA instances of connection <conn>.
1400
09dbca9f 1401- Fixed a regression introduced in 4.3.0 where EAP authentication calculated
047b2e42
MW
1402 the AUTH payload incorrectly. Further, the EAP-MSCHAPv2 MSK key derivation
1403 has been updated to be compatible with the Windows 7 Release Candidate.
1404
1405- Refactored installation of triggering policies. Routed policies are handled
1406 outside of IKE_SAs to keep them installed in any case. A tunnel gets
1407 established only once, even if initiation is delayed due network outages.
1408
050cc582
AS
1409- Improved the handling of multiple acquire signals triggered by the kernel.
1410
1411- Fixed two DoS vulnerabilities in the charon daemon that were discovered by
1412 fuzzing techniques: 1) Sending a malformed IKE_SA_INIT request leaved an
1413 incomplete state which caused a null pointer dereference if a subsequent
1414 CREATE_CHILD_SA request was sent. 2) Sending an IKE_AUTH request with either
1415 a missing TSi or TSr payload caused a null pointer derefence because the
b6b90b68 1416 checks for TSi and TSr were interchanged. The IKEv2 fuzzer used was
f3bb1bd0 1417 developed by the Orange Labs vulnerability research team. The tool was
050cc582
AS
1418 initially written by Gabriel Campana and is now maintained by Laurent Butti.
1419
047b2e42
MW
1420- Added support for AES counter mode in ESP in IKEv2 using the proposal
1421 keywords aes128ctr, aes192ctr and aes256ctr.
1422
d44fd821 1423- Further progress in refactoring pluto: Use of the curl and ldap plugins
050cc582
AS
1424 for fetching crls and OCSP. Use of the random plugin to get keying material
1425 from /dev/random or /dev/urandom. Use of the openssl plugin as an alternative
d44fd821 1426 to the aes, des, sha1, sha2, and md5 plugins. The blowfish, twofish, and
050cc582 1427 serpent encryption plugins are now optional and are not enabled by default.
d44fd821
AS
1428
1429
247e665a
AS
1430strongswan-4.3.0
1431----------------
1432
81fc8e5f
MW
1433- Support for the IKEv2 Multiple Authentication Exchanges extension (RFC4739).
1434 Initiators and responders can use several authentication rounds (e.g. RSA
1435 followed by EAP) to authenticate. The new ipsec.conf leftauth/rightauth and
1436 leftauth2/rightauth2 parameters define own authentication rounds or setup
1437 constraints for the remote peer. See the ipsec.conf man page for more detials.
1438
1439- If glibc printf hooks (register_printf_function) are not available,
1440 strongSwan can use the vstr string library to run on non-glibc systems.
1441
558c89e7
AS
1442- The IKEv2 charon daemon can now configure the ESP CAMELLIA-CBC cipher
1443 (esp=camellia128|192|256).
247e665a 1444
558c89e7
AS
1445- Refactored the pluto and scepclient code to use basic functions (memory
1446 allocation, leak detective, chunk handling, printf_hooks, strongswan.conf
1447 attributes, ASN.1 parser, etc.) from the libstrongswan library.
b752f873 1448
558c89e7
AS
1449- Up to two DNS and WINS servers to be sent via IKEv1 ModeConfig can be
1450 configured in the pluto section of strongswan.conf.
dfd7ba80 1451
247e665a 1452
623bca40
AS
1453strongswan-4.2.14
1454-----------------
1455
22180558 1456- The new server-side EAP RADIUS plugin (--enable-eap-radius)
f3bb1bd0 1457 relays EAP messages to and from a RADIUS server. Successfully
22180558
AS
1458 tested with with a freeradius server using EAP-MD5 and EAP-SIM.
1459
79b27294
AS
1460- A vulnerability in the Dead Peer Detection (RFC 3706) code was found by
1461 Gerd v. Egidy <gerd.von.egidy@intra2net.com> of Intra2net AG affecting
1462 all Openswan and strongSwan releases. A malicious (or expired ISAKMP)
1463 R_U_THERE or R_U_THERE_ACK Dead Peer Detection packet can cause the
1464 pluto IKE daemon to crash and restart. No authentication or encryption
1465 is required to trigger this bug. One spoofed UDP packet can cause the
1466 pluto IKE daemon to restart and be unresponsive for a few seconds while
1467 restarting. This DPD null state vulnerability has been officially
1468 registered as CVE-2009-0790 and is fixed by this release.
1469
22180558
AS
1470- ASN.1 to time_t conversion caused a time wrap-around for
1471 dates after Jan 18 03:14:07 UTC 2038 on 32-bit platforms.
1472 As a workaround such dates are set to the maximum representable
1473 time, i.e. Jan 19 03:14:07 UTC 2038.
1474
1475- Distinguished Names containing wildcards (*) are not sent in the
b6b90b68 1476 IDr payload anymore.
623bca40
AS
1477
1478
076e7853
AS
1479strongswan-4.2.13
1480-----------------
1481
1482- Fixed a use-after-free bug in the DPD timeout section of the
1483 IKEv1 pluto daemon which sporadically caused a segfault.
1484
f3bb1bd0 1485- Fixed a crash in the IKEv2 charon daemon occurring with
b6b90b68 1486 mixed RAM-based and SQL-based virtual IP address pools.
076e7853 1487
f15483ef
AS
1488- Fixed ASN.1 parsing of algorithmIdentifier objects where the
1489 parameters field is optional.
1490
03991bc1
MW
1491- Ported nm plugin to NetworkManager 7.1.
1492
076e7853 1493
bfde75ee 1494strongswan-4.2.12
076e7853 1495-----------------
bfde75ee
AS
1496
1497- Support of the EAP-MSCHAPv2 protocol enabled by the option
1498 --enable-eap-mschapv2. Requires the MD4 hash algorithm enabled
1499 either by --enable-md4 or --enable-openssl.
1500
1501- Assignment of up to two DNS and up to two WINS servers to peers via
b6b90b68 1502 the IKEv2 Configuration Payload (CP). The IPv4 or IPv6 nameserver
bfde75ee
AS
1503 addresses are defined in strongswan.conf.
1504
1505- The strongSwan applet for the Gnome NetworkManager is now built and
1506 distributed as a separate tarball under the name NetworkManager-strongswan.
1507
b6b90b68 1508
0519ca90
AS
1509strongswan-4.2.11
1510-----------------
1511
ae1ae574
AS
1512- Fixed ESP NULL encryption broken by the refactoring of keymat.c.
1513 Also introduced proper initialization and disposal of keying material.
1514
1515- Fixed the missing listing of connection definitions in ipsec statusall
1516 broken by an unfortunate local variable overload.
0519ca90
AS
1517
1518
4856241c
MW
1519strongswan-4.2.10
1520-----------------
1521
1522- Several performance improvements to handle thousands of tunnels with almost
1523 linear upscaling. All relevant data structures have been replaced by faster
1524 counterparts with better lookup times.
1525
1526- Better parallelization to run charon on multiple cores. Due to improved
1527 ressource locking and other optimizations the daemon can take full
1528 advantage of 16 or even more cores.
1529
1530- The load-tester plugin can use a NULL Diffie-Hellman group and simulate
1531 unique identities and certificates by signing peer certificates using a CA
1532 on the fly.
1533
1534- The redesigned stroke in-memory IP pool handles leases. The "ipsec leases"
1535 command queries assigned leases.
1536
1537- Added support for smartcards in charon by using the ENGINE API provided by
1538 OpenSSL, based on patches by Michael Roßberg.
1539
1540- The Padlock plugin supports the hardware RNG found on VIA CPUs to provide a
1541 reliable source of randomness.
1542
73937bd8
MW
1543strongswan-4.2.9
1544----------------
1545
509e07c5
AS
1546- Flexible configuration of logging subsystem allowing to log to multiple
1547 syslog facilities or to files using fine-grained log levels for each target.
73937bd8
MW
1548
1549- Load testing plugin to do stress testing of the IKEv2 daemon against self
1550 or another host. Found and fixed issues during tests in the multi-threaded
1551 use of the OpenSSL plugin.
1552
1553- Added profiling code to synchronization primitives to find bottlenecks if
7bdc931e 1554 running on multiple cores. Found and fixed an issue where parts of the
73937bd8
MW
1555 Diffie-Hellman calculation acquired an exclusive lock. This greatly improves
1556 parallelization to multiple cores.
1557
509e07c5
AS
1558- updown script invocation has been separated into a plugin of its own to
1559 further slim down the daemon core.
73937bd8 1560
509e07c5 1561- Separated IKE_SA/CHILD_SA key derivation process into a closed system,
7bdc931e 1562 allowing future implementations to use a secured environment in e.g. kernel
73937bd8
MW
1563 memory or hardware.
1564
509e07c5
AS
1565- The kernel interface of charon has been modularized. XFRM NETLINK (default)
1566 and PFKEY (--enable-kernel-pfkey) interface plugins for the native IPsec
1567 stack of the Linux 2.6 kernel as well as a PFKEY interface for the KLIPS
1568 IPsec stack (--enable-kernel-klips) are provided.
1569
1570- Basic Mobile IPv6 support has been introduced, securing Binding Update
1571 messages as well as tunneled traffic between Mobile Node and Home Agent.
1572 The installpolicy=no option allows peaceful cooperation with a dominant
1573 mip6d daemon and the new type=transport_proxy implements the special MIPv6
1574 IPsec transport proxy mode where the IKEv2 daemon uses the Care-of-Address
f3bb1bd0 1575 but the IPsec SA is set up for the Home Address.
7bdc931e 1576
4dc0dce8
AS
1577- Implemented migration of Mobile IPv6 connections using the KMADDRESS
1578 field contained in XFRM_MSG_MIGRATE messages sent by the mip6d daemon
1579 via the Linux 2.6.28 (or appropriately patched) kernel.
1580
73937bd8 1581
e39b271b
AS
1582strongswan-4.2.8
1583----------------
1584
5dadb16e 1585- IKEv2 charon daemon supports authentication based on raw public keys
e39b271b
AS
1586 stored in the SQL database backend. The ipsec listpubkeys command
1587 lists the available raw public keys via the stroke interface.
1588
4f0241e6
MW
1589- Several MOBIKE improvements: Detect changes in NAT mappings in DPD exchanges,
1590 handle events if kernel detects NAT mapping changes in UDP-encapsulated
1591 ESP packets (requires kernel patch), reuse old addesses in MOBIKE updates as
1592 long as possible and other fixes.
1593
5dadb16e
AS
1594- Fixed a bug in addr_in_subnet() which caused insertion of wrong source
1595 routes for destination subnets having netwmasks not being a multiple of 8 bits.
1596 Thanks go to Wolfgang Steudel, TU Ilmenau for reporting this bug.
1597
e39b271b 1598
e376d75f
MW
1599strongswan-4.2.7
1600----------------
1601
b37cda82
AS
1602- Fixed a Denial-of-Service vulnerability where an IKE_SA_INIT message with
1603 a KE payload containing zeroes only can cause a crash of the IKEv2 charon
1604 daemon due to a NULL pointer returned by the mpz_export() function of the
1605 GNU Multiprecision Library (GMP). Thanks go to Mu Dynamics Research Labs
b6b90b68 1606 for making us aware of this problem.
b37cda82 1607
b6b90b68 1608- The new agent plugin provides a private key implementation on top of an
e376d75f
MW
1609 ssh-agent.
1610
1611- The NetworkManager plugin has been extended to support certificate client
b1f47854 1612 authentication using RSA keys loaded from a file or using ssh-agent.
e376d75f
MW
1613
1614- Daemon capability dropping has been ported to libcap and must be enabled
1615 explicitly --with-capabilities=libcap. Future version will support the
1616 newer libcap2 library.
1617
b37cda82
AS
1618- ipsec listalgs lists the IKEv2 cryptografic algorithms registered with the
1619 charon keying daemon.
1620
1621
9f9d6ece
AS
1622strongswan-4.2.6
1623----------------
1624
609166f4
MW
1625- A NetworkManager plugin allows GUI-based configuration of road-warrior
1626 clients in a simple way. It features X509 based gateway authentication
1627 and EAP client authentication, tunnel setup/teardown and storing passwords
1628 in the Gnome Keyring.
1629
1630- A new EAP-GTC plugin implements draft-sheffer-ikev2-gtc-00.txt and allows
1631 username/password authentication against any PAM service on the gateway.
b6b90b68 1632 The new EAP method interacts nicely with the NetworkManager plugin and allows
609166f4
MW
1633 client authentication against e.g. LDAP.
1634
1635- Improved support for the EAP-Identity method. The new ipsec.conf eap_identity
1636 parameter defines an additional identity to pass to the server in EAP
1637 authentication.
1638
9f9d6ece
AS
1639- The "ipsec statusall" command now lists CA restrictions, EAP
1640 authentication types and EAP identities.
1641
1642- Fixed two multithreading deadlocks occurring when starting up
1643 several hundred tunnels concurrently.
1644
1645- Fixed the --enable-integrity-test configure option which
1646 computes a SHA-1 checksum over the libstrongswan library.
1647
1648
174216c7
AS
1649strongswan-4.2.5
1650----------------
1651
b6b90b68 1652- Consistent logging of IKE and CHILD SAs at the audit (AUD) level.
8124e491
AS
1653
1654- Improved the performance of the SQL-based virtual IP address pool
1655 by introducing an additional addresses table. The leases table
1656 storing only history information has become optional and can be
1657 disabled by setting charon.plugins.sql.lease_history = no in
1658 strongswan.conf.
1659
eb0cc338 1660- The XFRM_STATE_AF_UNSPEC flag added to xfrm.h allows IPv4-over-IPv6
de5f70e7 1661 and IPv6-over-IPv4 tunnels with the 2.6.26 and later Linux kernels.
eb0cc338 1662
174216c7
AS
1663- management of different virtual IP pools for different
1664 network interfaces have become possible.
1665
b6b90b68 1666- fixed a bug which prevented the assignment of more than 256
174216c7
AS
1667 virtual IP addresses from a pool managed by an sql database.
1668
8124e491
AS
1669- fixed a bug which did not delete own IPCOMP SAs in the kernel.
1670
b6b90b68 1671
179dd12c
AS
1672strongswan-4.2.4
1673----------------
1674
9de95037
AS
1675- Added statistics functions to ipsec pool --status and ipsec pool --leases
1676 and input validation checks to various ipsec pool commands.
179dd12c 1677
73a8eed3 1678- ipsec statusall now lists all loaded charon plugins and displays
9de95037 1679 the negotiated IKEv2 cipher suite proposals.
73a8eed3
AS
1680
1681- The openssl plugin supports the elliptic curve Diffie-Hellman groups
1682 19, 20, 21, 25, and 26.
1683
1684- The openssl plugin supports ECDSA authentication using elliptic curve
1685 X.509 certificates.
1686
1687- Fixed a bug in stroke which caused multiple charon threads to close
1688 the file descriptors during packet transfers over the stroke socket.
b6b90b68 1689
e0bb4dbb
AS
1690- ESP sequence numbers are now migrated in IPsec SA updates handled by
1691 MOBIKE. Works only with Linux kernels >= 2.6.17.
1692
179dd12c 1693
83d9e870
AS
1694strongswan-4.2.3
1695----------------
1696
b6b90b68 1697- Fixed the strongswan.conf path configuration problem that occurred when
83d9e870
AS
1698 --sysconfig was not set explicitly in ./configure.
1699
1700- Fixed a number of minor bugs that where discovered during the 4th
1701 IKEv2 interoperability workshop in San Antonio, TX.
1702
1703
7f491111
MW
1704strongswan-4.2.2
1705----------------
1706
a57cd446
AS
1707- Plugins for libstrongswan and charon can optionally be loaded according
1708 to a configuration in strongswan.conf. Most components provide a
7f491111 1709 "load = " option followed by a space separated list of plugins to load.
a57cd446
AS
1710 This allows e.g. the fallback from a hardware crypto accelerator to
1711 to software-based crypto plugins.
7f491111
MW
1712
1713- Charons SQL plugin has been extended by a virtual IP address pool.
a57cd446
AS
1714 Configurations with a rightsourceip=%poolname setting query a SQLite or
1715 MySQL database for leases. The "ipsec pool" command helps in administrating
1716 the pool database. See ipsec pool --help for the available options
1717
1718- The Authenticated Encryption Algorithms AES-CCM-8/12/16 and AES-GCM-8/12/16
b6b90b68 1719 for ESP are now supported starting with the Linux 2.6.25 kernel. The
a57cd446
AS
1720 syntax is e.g. esp=aes128ccm12 or esp=aes256gcm16.
1721
7f491111 1722
5c5d67d6
AS
1723strongswan-4.2.1
1724----------------
1725
c306dfb1 1726- Support for "Hash and URL" encoded certificate payloads has been implemented
b1f8fc0c
TB
1727 in the IKEv2 daemon charon. Using the "certuribase" option of a CA section
1728 allows to assign a base URL to all certificates issued by the specified CA.
1729 The final URL is then built by concatenating that base and the hex encoded
1730 SHA1 hash of the DER encoded certificate. Note that this feature is disabled
1731 by default and must be enabled using the option "charon.hash_and_url".
5c5d67d6 1732
58caabf7
MW
1733- The IKEv2 daemon charon now supports the "uniqueids" option to close multiple
1734 IKE_SAs with the same peer. The option value "keep" prefers existing
1735 connection setups over new ones, where the value "replace" replaces existing
1736 connections.
b6b90b68 1737
f3bb1bd0 1738- The crypto factory in libstrongswan additionally supports random number
58caabf7 1739 generators, plugins may provide other sources of randomness. The default
c306dfb1 1740 plugin reads raw random data from /dev/(u)random.
58caabf7 1741
b6b90b68 1742- Extended the credential framework by a caching option to allow plugins
58caabf7 1743 persistent caching of fetched credentials. The "cachecrl" option has been
c306dfb1 1744 re-implemented.
58caabf7
MW
1745
1746- The new trustchain verification introduced in 4.2.0 has been parallelized.
1747 Threads fetching CRL or OCSP information no longer block other threads.
5c5d67d6 1748
58caabf7
MW
1749- A new IKEv2 configuration attribute framework has been introduced allowing
1750 plugins to provide virtual IP addresses, and in the future, other
1751 configuration attribute services (e.g. DNS/WINS servers).
5c5d67d6 1752
466abb49 1753- The stroke plugin has been extended to provide virtual IP addresses from
58caabf7
MW
1754 a pool defined in ipsec.conf. The "rightsourceip" parameter now accepts
1755 address pools in CIDR notation (e.g. 10.1.1.0/24). The parameter also accepts
1756 the value "%poolname", where "poolname" identifies a pool provided by a
466abb49 1757 separate plugin.
58caabf7 1758
c306dfb1 1759- Fixed compilation on uClibc and a couple of other minor bugs.
58caabf7 1760
c306dfb1 1761- Set DPD defaults in ipsec starter to dpd_delay=30s and dpd_timeout=150s.
466abb49
AS
1762
1763- The IKEv1 pluto daemon now supports the ESP encryption algorithm CAMELLIA
c306dfb1 1764 with key lengths of 128, 192, and 256 bits, as well as the authentication
466abb49
AS
1765 algorithm AES_XCBC_MAC. Configuration example: esp=camellia192-aesxcbc.
1766
5c5d67d6 1767
a11ea97d
AS
1768strongswan-4.2.0
1769----------------
1770
16f5dacd
MW
1771- libstrongswan has been modularized to attach crypto algorithms,
1772 credential implementations (keys, certificates) and fetchers dynamically
1773 through plugins. Existing code has been ported to plugins:
1774 - RSA/Diffie-Hellman implementation using the GNU Multi Precision library
1775 - X509 certificate system supporting CRLs, OCSP and attribute certificates
1776 - Multiple plugins providing crypto algorithms in software
1777 - CURL and OpenLDAP fetcher
a11ea97d 1778
16f5dacd
MW
1779- libstrongswan gained a relational database API which uses pluggable database
1780 providers. Plugins for MySQL and SQLite are available.
1781
1782- The IKEv2 keying daemon charon is more extensible. Generic plugins may provide
1783 connection configuration, credentials and EAP methods or control the daemon.
1784 Existing code has been ported to plugins:
1785 - EAP-AKA, EAP-SIM, EAP-MD5 and EAP-Identity
1786 - stroke configuration, credential and control (compatible to pluto)
1787 - XML bases management protocol to control and query the daemon
1788 The following new plugins are available:
1789 - An experimental SQL configuration, credential and logging plugin on
1790 top of either MySQL or SQLite
1791 - A unit testing plugin to run tests at daemon startup
1792
1793- The authentication and credential framework in charon has been heavily
1794 refactored to support modular credential providers, proper
1795 CERTREQ/CERT payload exchanges and extensible authorization rules.
1796
b6b90b68 1797- The framework of strongSwan Manager has envolved to the web application
16f5dacd
MW
1798 framework libfast (FastCGI Application Server w/ Templates) and is usable
1799 by other applications.
b6b90b68 1800
a11ea97d 1801
6859f760
AS
1802strongswan-4.1.11
1803-----------------
fb6d76cd 1804
a561f74d
AS
1805- IKE rekeying in NAT situations did not inherit the NAT conditions
1806 to the rekeyed IKE_SA so that the UDP encapsulation was lost with
1807 the next CHILD_SA rekeying.
1808
1809- Wrong type definition of the next_payload variable in id_payload.c
b6b90b68 1810 caused an INVALID_SYNTAX error on PowerPC platforms.
fb6d76cd 1811
e6b50b3f
AS
1812- Implemented IKEv2 EAP-SIM server and client test modules that use
1813 triplets stored in a file. For details on the configuration see
1814 the scenario 'ikev2/rw-eap-sim-rsa'.
1815
fb6d76cd 1816
83e0d841
AS
1817strongswan-4.1.10
1818-----------------
1819
1820- Fixed error in the ordering of the certinfo_t records in the ocsp cache that
b6b90b68 1821 caused multiple entries of the same serial number to be created.
83e0d841 1822
fdc7c943
MW
1823- Implementation of a simple EAP-MD5 module which provides CHAP
1824 authentication. This may be interesting in conjunction with certificate
1825 based server authentication, as weak passwords can't be brute forced
1826 (in contradiction to traditional IKEv2 PSK).
1827
1828- A complete software based implementation of EAP-AKA, using algorithms
1829 specified in 3GPP2 (S.S0055). This implementation does not use an USIM,
1830 but reads the secrets from ipsec.secrets. Make sure to read eap_aka.h
1831 before using it.
1832
1833- Support for vendor specific EAP methods using Expanded EAP types. The
b6b90b68 1834 interface to EAP modules has been slightly changed, so make sure to
fdc7c943 1835 check the changes if you're already rolling your own modules.
83e0d841 1836
fb6d76cd 1837
5076770c
AS
1838strongswan-4.1.9
1839----------------
1840
800b3356
AS
1841- The default _updown script now dynamically inserts and removes ip6tables
1842 firewall rules if leftfirewall=yes is set in IPv6 connections. New IPv6
1843 net-net and roadwarrior (PSK/RSA) scenarios for both IKEv1 and IKEV2 were
1844 added.
5076770c 1845
6f274c2a
MW
1846- Implemented RFC4478 repeated authentication to force EAP/Virtual-IP clients
1847 to reestablish an IKE_SA within a given timeframe.
1848
1849- strongSwan Manager supports configuration listing, initiation and termination
1850 of IKE and CHILD_SAs.
1851
1852- Fixes and improvements to multithreading code.
1853
8b678ad4 1854- IKEv2 plugins have been renamed to libcharon-* to avoid naming conflicts.
b6b90b68 1855 Make sure to remove the old plugins in $libexecdir/ipsec, otherwise they get
8b678ad4 1856 loaded twice.
5076770c 1857
83e0d841 1858
b82e8231
AS
1859strongswan-4.1.8
1860----------------
1861
5076770c 1862- Removed recursive pthread mutexes since uClibc doesn't support them.
b82e8231
AS
1863
1864
a4a3632c
AS
1865strongswan-4.1.7
1866----------------
1867
1868- In NAT traversal situations and multiple queued Quick Modes,
1869 those pending connections inserted by auto=start after the
1870 port floating from 500 to 4500 were erronously deleted.
1871
6e193274 1872- Added a "forceencaps" connection parameter to enforce UDP encapsulation
078b6008 1873 to surmount restrictive firewalls. NAT detection payloads are faked to
6e193274
MW
1874 simulate a NAT situation and trick the other peer into NAT mode (IKEv2 only).
1875
1876- Preview of strongSwan Manager, a web based configuration and monitoring
1877 application. It uses a new XML control interface to query the IKEv2 daemon
64d24679 1878 (see http://wiki.strongswan.org/wiki/Manager).
6e193274
MW
1879
1880- Experimental SQLite configuration backend which will provide the configuration
1881 interface for strongSwan Manager in future releases.
1882
1883- Further improvements to MOBIKE support.
1884
a4a3632c 1885
3dcf9dbd
AS
1886strongswan-4.1.6
1887----------------
1888
3eac4dfd
AS
1889- Since some third party IKEv2 implementations run into
1890 problems with strongSwan announcing MOBIKE capability per
1891 default, MOBIKE can be disabled on a per-connection-basis
1892 using the mobike=no option. Whereas mobike=no disables the
1893 sending of the MOBIKE_SUPPORTED notification and the floating
1894 to UDP port 4500 with the IKE_AUTH request even if no NAT
1895 situation has been detected, strongSwan will still support
1896 MOBIKE acting as a responder.
1897
1898- the default ipsec routing table plus its corresponding priority
1899 used for inserting source routes has been changed from 100 to 220.
1900 It can be configured using the --with-ipsec-routing-table and
b6b90b68
MW
1901 --with-ipsec-routing-table-prio options.
1902
bdc0b55b
AS
1903- the --enable-integrity-test configure option tests the
1904 integrity of the libstrongswan crypto code during the charon
1905 startup.
b6b90b68 1906
3eac4dfd
AS
1907- the --disable-xauth-vid configure option disables the sending
1908 of the XAUTH vendor ID. This can be used as a workaround when
1909 interoperating with some Windows VPN clients that get into
1910 trouble upon reception of an XAUTH VID without eXtended
1911 AUTHentication having been configured.
b6b90b68 1912
f872f9d1
AS
1913- ipsec stroke now supports the rereadsecrets, rereadaacerts,
1914 rereadacerts, and listacerts options.
3dcf9dbd
AS
1915
1916
7ad634a2
AS
1917strongswan-4.1.5
1918----------------
1919
1920- If a DNS lookup failure occurs when resolving right=%<FQDN>
1921 or right=<FQDN> combined with rightallowany=yes then the
1922 connection is not updated by ipsec starter thus preventing
1923 the disruption of an active IPsec connection. Only if the DNS
1924 lookup successfully returns with a changed IP address the
1925 corresponding connection definition is updated.
1926
8f5b363c
MW
1927- Routes installed by the keying daemons are now in a separate
1928 routing table with the ID 100 to avoid conflicts with the main
1929 table. Route lookup for IKEv2 traffic is done in userspace to ignore
1930 routes installed for IPsec, as IKE traffic shouldn't get encapsulated.
1931
7ad634a2 1932
e93c68ba
AS
1933strongswan-4.1.4
1934----------------
1935
1936- The pluto IKEv1 daemon now exhibits the same behaviour as its
1937 IKEv2 companion charon by inserting an explicit route via the
1938 _updown script only if a sourceip exists. This is admissible
1939 since routing through the IPsec tunnel is handled automatically
b7af55ac
AS
1940 by NETKEY's IPsec policies. As a consequence the left|rightnexthop
1941 parameter is not required any more.
078ce348
AS
1942
1943- The new IKEv1 parameter right|leftallowany parameters helps to handle
1944 the case where both peers possess dynamic IP addresses that are
1945 usually resolved using DynDNS or a similar service. The configuration
1946
1947 right=peer.foo.bar
1948 rightallowany=yes
1949
1950 can be used by the initiator to start up a connection to a peer
1951 by resolving peer.foo.bar into the currently allocated IP address.
1952 Thanks to the rightallowany flag the connection behaves later on
1953 as
1954
1955 right=%any
1956
1957 so that the peer can rekey the connection as an initiator when his
1fbdab85
AS
1958 IP address changes. An alternative notation is
1959
1960 right=%peer.foo.bar
1961
1962 which will implicitly set rightallowany=yes.
1963
1964- ipsec starter now fails more gracefully in the presence of parsing
1965 errors. Flawed ca and conn section are discarded and pluto is started
1966 if non-fatal errors only were encountered. If right=%peer.foo.bar
1967 cannot be resolved by DNS then right=%any will be used so that passive
1968 connections as a responder are still possible.
078ce348 1969
a0a0bdd7
AS
1970- The new pkcs11initargs parameter that can be placed in the
1971 setup config section of /etc/ipsec.conf allows the definition
1972 of an argument string that is used with the PKCS#11 C_Initialize()
1973 function. This non-standard feature is required by the NSS softoken
1974 library. This patch was contributed by Robert Varga.
b6b90b68 1975
a0a0bdd7
AS
1976- Fixed a bug in ipsec starter introduced by strongswan-2.8.5
1977 which caused a segmentation fault in the presence of unknown
1978 or misspelt keywords in ipsec.conf. This bug fix was contributed
1979 by Robert Varga.
1980
e3606f2b
MW
1981- Partial support for MOBIKE in IKEv2. The initiator acts on interface/
1982 address configuration changes and updates IKE and IPsec SAs dynamically.
e93c68ba 1983
06651827 1984
a3354a69
AS
1985strongswan-4.1.3
1986----------------
1987
b6b90b68 1988- IKEv2 peer configuration selection now can be based on a given
35d4809c
AS
1989 certification authority using the rightca= statement.
1990
1991- IKEv2 authentication based on RSA signatures now can handle multiple
41e16cf4
AS
1992 certificates issued for a given peer ID. This allows a smooth transition
1993 in the case of a peer certificate renewal.
a3354a69 1994
998ca0ea
MW
1995- IKEv2: Support for requesting a specific virtual IP using leftsourceip on the
1996 client and returning requested virtual IPs using rightsourceip=%config
1997 on the server. If the server does not support configuration payloads, the
1998 client enforces its leftsourceip parameter.
1999
2000- The ./configure options --with-uid/--with-gid allow pluto and charon
2001 to drop their privileges to a minimum and change to an other UID/GID. This
2002 improves the systems security, as a possible intruder may only get the
2003 CAP_NET_ADMIN capability.
2004
b6b90b68 2005- Further modularization of charon: Pluggable control interface and
998ca0ea
MW
2006 configuration backend modules provide extensibility. The control interface
2007 for stroke is included, and further interfaces using DBUS (NetworkManager)
2008 or XML are on the way. A backend for storing configurations in the daemon
b6b90b68 2009 is provided and more advanced backends (using e.g. a database) are trivial
998ca0ea 2010 to implement.
a3354a69 2011
f3bb1bd0 2012 - Fixed a compilation failure in libfreeswan occurring with Linux kernel
41e16cf4
AS
2013 headers > 2.6.17.
2014
2015
8ea7b96f
AS
2016strongswan-4.1.2
2017----------------
2018
e23d98a7 2019- Support for an additional Diffie-Hellman exchange when creating/rekeying
37fb0355
MW
2020 a CHILD_SA in IKEv2 (PFS). PFS is enabled when the proposal contains a
2021 DH group (e.g. "esp=aes128-sha1-modp1536"). Further, DH group negotiation
2022 is implemented properly for rekeying.
2023
2024- Support for the AES-XCBC-96 MAC algorithm for IPsec SAs when using IKEv2
2025 (requires linux >= 2.6.20). It is enabled using e.g. "esp=aes256-aesxcbc".
2026
d931f465
MW
2027- Working IPv4-in-IPv6 and IPv6-in-IPv4 tunnels for linux >= 2.6.21.
2028
37fb0355
MW
2029- Added support for EAP modules which do not establish an MSK.
2030
dfbe2a0f 2031- Removed the dependencies from the /usr/include/linux/ headers by
9f78f957 2032 including xfrm.h, ipsec.h, and pfkeyv2.h in the distribution.
b6b90b68 2033
9f78f957
AS
2034- crlNumber is now listed by ipsec listcrls
2035
8ea7b96f
AS
2036- The xauth_modules.verify_secret() function now passes the
2037 connection name.
2038
e23d98a7 2039
ed284399
MW
2040strongswan-4.1.1
2041----------------
2042
2043- Server side cookie support. If to may IKE_SAs are in CONNECTING state,
2044 cookies are enabled and protect against DoS attacks with faked source
2045 addresses. Number of IKE_SAs in CONNECTING state is also limited per
2046 peer address to avoid resource exhaustion. IKE_SA_INIT messages are
2047 compared to properly detect retransmissions and incoming retransmits are
2048 detected even if the IKE_SA is blocked (e.g. doing OCSP fetches).
2049
db88e37d
AS
2050- The IKEv2 daemon charon now supports dynamic http- and ldap-based CRL
2051 fetching enabled by crlcheckinterval > 0 and caching fetched CRLs
2052 enabled by cachecrls=yes.
2053
3b4f7d92
AS
2054- Added the configuration options --enable-nat-transport which enables
2055 the potentially insecure NAT traversal for IPsec transport mode and
2056 --disable-vendor-id which disables the sending of the strongSwan
2057 vendor ID.
2058
2059- Fixed a long-standing bug in the pluto IKEv1 daemon which caused
2060 a segmentation fault if a malformed payload was detected in the
2061 IKE MR2 message and pluto tried to send an encrypted notification
2062 message.
2063
46b9ff68
AS
2064- Added the NATT_IETF_02_N Vendor ID in order to support IKEv1 connections
2065 with Windows 2003 Server which uses a wrong VID hash.
2066
3b4f7d92 2067
34bbd0c3 2068strongswan-4.1.0
cd3958f8
AS
2069----------------
2070
2071- Support of SHA2_384 hash function for protecting IKEv1
2072 negotiations and support of SHA2 signatures in X.509 certificates.
2073
2074- Fixed a serious bug in the computation of the SHA2-512 HMAC
2075 function. Introduced automatic self-test of all IKEv1 hash
2076 and hmac functions during pluto startup. Failure of a self-test
2077 currently issues a warning only but does not exit pluto [yet].
2078
9b45443d
MW
2079- Support for SHA2-256/384/512 PRF and HMAC functions in IKEv2.
2080
c5d0fbb6 2081- Full support of CA information sections. ipsec listcainfos
b6b90b68 2082 now shows all collected crlDistributionPoints and OCSP
c5d0fbb6
AS
2083 accessLocations.
2084
69ed04bf
AS
2085- Support of the Online Certificate Status Protocol (OCSP) for IKEv2.
2086 This feature requires the HTTP fetching capabilities of the libcurl
2087 library which must be enabled by setting the --enable-http configure
2088 option.
2089
9b45443d
MW
2090- Refactored core of the IKEv2 message processing code, allowing better
2091 code reuse and separation.
2092
2093- Virtual IP support in IKEv2 using INTERNAL_IP4/6_ADDRESS configuration
2094 payload. Additionally, the INTERNAL_IP4/6_DNS attribute is interpreted
2095 by the requestor and installed in a resolv.conf file.
2096
2097- The IKEv2 daemon charon installs a route for each IPsec policy to use
2098 the correct source address even if an application does not explicitly
2099 specify it.
2100
2101- Integrated the EAP framework into charon which loads pluggable EAP library
2102 modules. The ipsec.conf parameter authby=eap initiates EAP authentication
2103 on the client side, while the "eap" parameter on the server side defines
2104 the EAP method to use for client authentication.
2105 A generic client side EAP-Identity module and an EAP-SIM authentication
2106 module using a third party card reader implementation are included.
2107
2108- Added client side support for cookies.
2109
2110- Integrated the fixes done at the IKEv2 interoperability bakeoff, including
2111 strict payload order, correct INVALID_KE_PAYLOAD rejection and other minor
2112 fixes to enhance interoperability with other implementations.
cd3958f8 2113
e23d98a7 2114
1c266d7d
AS
2115strongswan-4.0.7
2116----------------
2117
6fdf5f44
AS
2118- strongSwan now interoperates with the NCP Secure Entry Client,
2119 the Shrew Soft VPN Client, and the Cisco VPN client, doing both
2120 XAUTH and Mode Config.
1c266d7d
AS
2121
2122- UNITY attributes are now recognized and UNITY_BANNER is set
2123 to a default string.
2124
2125
2b4405a3
MW
2126strongswan-4.0.6
2127----------------
2128
e38a15d4
AS
2129- IKEv1: Support for extended authentication (XAUTH) in combination
2130 with ISAKMP Main Mode RSA or PSK authentication. Both client and
2131 server side were implemented. Handling of user credentials can
2132 be done by a run-time loadable XAUTH module. By default user
b6b90b68
MW
2133 credentials are stored in ipsec.secrets.
2134
2b4405a3
MW
2135- IKEv2: Support for reauthentication when rekeying
2136
5903179b 2137- IKEv2: Support for transport mode
af87afed 2138
5903179b 2139- fixed a lot of bugs related to byte order
2b4405a3 2140
5903179b 2141- various other bugfixes
2b4405a3
MW
2142
2143
0cd645d2
AS
2144strongswan-4.0.5
2145----------------
2146
2147- IKEv1: Implementation of ModeConfig push mode via the new connection
2148 keyword modeconfig=push allows interoperability with Cisco VPN gateways.
2149
2150- IKEv1: The command ipsec statusall now shows "DPD active" for all
2151 ISAKMP SAs that are under active Dead Peer Detection control.
2152
2153- IKEv2: Charon's logging and debugging framework has been completely rewritten.
2154 Instead of logger, special printf() functions are used to directly
2155 print objects like hosts (%H) identifications (%D), certificates (%Q),
2156 etc. The number of debugging levels have been reduced to:
03bf883d 2157
0cd645d2 2158 0 (audit), 1 (control), 2 (controlmore), 3 (raw), 4 (private)
03bf883d 2159
0cd645d2
AS
2160 The debugging levels can either be specified statically in ipsec.conf as
2161
2162 config setup
03bf883d 2163 charondebug="lib 1, cfg 3, net 2"
0cd645d2 2164
03bf883d 2165 or changed at runtime via stroke as
0cd645d2 2166
03bf883d 2167 ipsec stroke loglevel cfg 2
0cd645d2
AS
2168
2169
48dc3934
MW
2170strongswan-4.0.4
2171----------------
2172
2173- Implemented full support for IPv6-in-IPv6 tunnels.
2174
2175- Added configuration options for dead peer detection in IKEv2. dpd_action
2176 types "clear", "hold" and "restart" are supported. The dpd_timeout
2177 value is not used, as the normal retransmission policy applies to
2178 detect dead peers. The dpd_delay parameter enables sending of empty
2179 informational message to detect dead peers in case of inactivity.
2180
2181- Added support for preshared keys in IKEv2. PSK keys configured in
2182 ipsec.secrets are loaded. The authby parameter specifies the authentication
2183 method to authentificate ourself, the other peer may use PSK or RSA.
2184
2185- Changed retransmission policy to respect the keyingtries parameter.
2186
112ad7c3
AS
2187- Added private key decryption. PEM keys encrypted with AES-128/192/256
2188 or 3DES are supported.
48dc3934
MW
2189
2190- Implemented DES/3DES algorithms in libstrongswan. 3DES can be used to
2191 encrypt IKE traffic.
2192
2193- Implemented SHA-256/384/512 in libstrongswan, allows usage of certificates
2194 signed with such a hash algorithm.
2195
2196- Added initial support for updown scripts. The actions up-host/client and
2197 down-host/client are executed. The leftfirewall=yes parameter
2198 uses the default updown script to insert dynamic firewall rules, a custom
2199 updown script may be specified with the leftupdown parameter.
2200
2201
a1310b6b
MW
2202strongswan-4.0.3
2203----------------
2204
2205- Added support for the auto=route ipsec.conf parameter and the
b6b90b68
MW
2206 ipsec route/unroute commands for IKEv2. This allows to set up IKE_SAs and
2207 CHILD_SAs dynamically on demand when traffic is detected by the
a1310b6b
MW
2208 kernel.
2209
2210- Added support for rekeying IKE_SAs in IKEv2 using the ikelifetime parameter.
2211 As specified in IKEv2, no reauthentication is done (unlike in IKEv1), only
2212 new keys are generated using perfect forward secrecy. An optional flag
2213 which enforces reauthentication will be implemented later.
2214
b425d998
AS
2215- "sha" and "sha1" are now treated as synonyms in the ike= and esp=
2216 algorithm configuration statements.
2217
2218
bf4df11f
AS
2219strongswan-4.0.2
2220----------------
2221
623d3dcf
AS
2222- Full X.509 certificate trust chain verification has been implemented.
2223 End entity certificates can be exchanged via CERT payloads. The current
2224 default is leftsendcert=always, since CERTREQ payloads are not supported
2225 yet. Optional CRLs must be imported locally into /etc/ipsec.d/crls.
efa40c11 2226
b6b90b68 2227- Added support for leftprotoport/rightprotoport parameters in IKEv2. IKEv2
efa40c11 2228 would offer more possibilities for traffic selection, but the Linux kernel
b6b90b68 2229 currently does not support it. That's why we stick with these simple
efa40c11
MW
2230 ipsec.conf rules for now.
2231
623d3dcf
AS
2232- Added Dead Peer Detection (DPD) which checks liveliness of remote peer if no
2233 IKE or ESP traffic is received. DPD is currently hardcoded (dpdaction=clear,
2234 dpddelay=60s).
2235
efa40c11
MW
2236- Initial NAT traversal support in IKEv2. Charon includes NAT detection
2237 notify payloads to detect NAT routers between the peers. It switches
2238 to port 4500, uses UDP encapsulated ESP packets, handles peer address
2239 changes gracefully and sends keep alive message periodically.
2240
b6b90b68
MW
2241- Reimplemented IKE_SA state machine for charon, which allows simultaneous
2242 rekeying, more shared code, cleaner design, proper retransmission
efa40c11
MW
2243 and a more extensible code base.
2244
cfd8b27f
AS
2245- The mixed PSK/RSA roadwarrior detection capability introduced by the
2246 strongswan-2.7.0 release necessitated the pre-parsing of the IKE proposal
2247 payloads by the responder right before any defined IKE Main Mode state had
2248 been established. Although any form of bad proposal syntax was being correctly
2249 detected by the payload parser, the subsequent error handler didn't check
2250 the state pointer before logging current state information, causing an
2251 immediate crash of the pluto keying daemon due to a NULL pointer.
2252
bf4df11f 2253
7e81e975
MW
2254strongswan-4.0.1
2255----------------
2256
b6b90b68 2257- Added algorithm selection to charon: New default algorithms for
c15c3d4b
MW
2258 ike=aes128-sha-modp2048, as both daemons support it. The default
2259 for IPsec SAs is now esp=aes128-sha,3des-md5. charon handles
2260 the ike/esp parameter the same way as pluto. As this syntax does
b6b90b68 2261 not allow specification of a pseudo random function, the same
c15c3d4b
MW
2262 algorithm as for integrity is used (currently sha/md5). Supported
2263 algorithms for IKE:
2264 Encryption: aes128, aes192, aes256
2265 Integrity/PRF: md5, sha (using hmac)
2266 DH-Groups: modp768, 1024, 1536, 2048, 4096, 8192
2267 and for ESP:
b6b90b68 2268 Encryption: aes128, aes192, aes256, 3des, blowfish128,
c15c3d4b
MW
2269 blowfish192, blowfish256
2270 Integrity: md5, sha1
2271 More IKE encryption algorithms will come after porting libcrypto into
b6b90b68 2272 libstrongswan.
f2c2d395 2273
c15c3d4b
MW
2274- initial support for rekeying CHILD_SAs using IKEv2. Currently no
2275 perfect forward secrecy is used. The rekeying parameters rekey,
22ff6f57 2276 rekeymargin, rekeyfuzz and keylife from ipsec.conf are now supported
c15c3d4b
MW
2277 when using IKEv2. WARNING: charon currently is unable to handle
2278 simultaneous rekeying. To avoid such a situation, use a large
2279 rekeyfuzz, or even better, set rekey=no on one peer.
22ff6f57 2280
7e81e975
MW
2281- support for host2host, net2net, host2net (roadwarrior) tunnels
2282 using predefined RSA certificates (see uml scenarios for
2283 configuration examples).
2284
f2c2d395
MW
2285- new build environment featuring autotools. Features such
2286 as HTTP, LDAP and smartcard support may be enabled using
b6b90b68 2287 the ./configure script. Changing install directories
f2c2d395
MW
2288 is possible, too. See ./configure --help for more details.
2289
22ff6f57
MW
2290- better integration of charon with ipsec starter, which allows
2291 (almost) transparent operation with both daemons. charon
2292 handles ipsec commands up, down, status, statusall, listall,
2293 listcerts and allows proper load, reload and delete of connections
2294 via ipsec starter.
2295
b425d998 2296
9820c0e2
MW
2297strongswan-4.0.0
2298----------------
2299
2300- initial support of the IKEv2 protocol. Connections in
b6b90b68 2301 ipsec.conf designated by keyexchange=ikev2 are negotiated
9820c0e2
MW
2302 by the new IKEv2 charon keying daemon whereas those marked
2303 by keyexchange=ikev1 or the default keyexchange=ike are
2304 handled thy the IKEv1 pluto keying daemon. Currently only
2305 a limited subset of functions are available with IKEv2
2306 (Default AES encryption, authentication based on locally
2307 imported X.509 certificates, unencrypted private RSA keys
2308 in PKCS#1 file format, limited functionality of the ipsec
2309 status command).
2310
2311
997358a6
MW
2312strongswan-2.7.0
2313----------------
2314
2315- the dynamic iptables rules from the _updown_x509 template
2316 for KLIPS and the _updown_policy template for NETKEY have
2317 been merged into the default _updown script. The existing
2318 left|rightfirewall keyword causes the automatic insertion
2319 and deletion of ACCEPT rules for tunneled traffic upon
2320 the successful setup and teardown of an IPsec SA, respectively.
2321 left|rightfirwall can be used with KLIPS under any Linux 2.4
2322 kernel or with NETKEY under a Linux kernel version >= 2.6.16
f3bb1bd0 2323 in conjunction with iptables >= 1.3.5. For NETKEY under a Linux
997358a6
MW
2324 kernel version < 2.6.16 which does not support IPsec policy
2325 matching yet, please continue to use a copy of the _updown_espmark
2326 template loaded via the left|rightupdown keyword.
2327
2328- a new left|righthostaccess keyword has been introduced which
2329 can be used in conjunction with left|rightfirewall and the
2330 default _updown script. By default leftfirewall=yes inserts
2331 a bi-directional iptables FORWARD rule for a local client network
2332 with a netmask different from 255.255.255.255 (single host).
2333 This does not allow to access the VPN gateway host via its
2334 internal network interface which is part of the client subnet
2335 because an iptables INPUT and OUTPUT rule would be required.
2336 lefthostaccess=yes will cause this additional ACCEPT rules to
b6b90b68 2337 be inserted.
997358a6
MW
2338
2339- mixed PSK|RSA roadwarriors are now supported. The ISAKMP proposal
2340 payload is preparsed in order to find out whether the roadwarrior
2341 requests PSK or RSA so that a matching connection candidate can
2342 be found.
2343
2344
2345strongswan-2.6.4
2346----------------
2347
2348- the new _updown_policy template allows ipsec policy based
2349 iptables firewall rules. Required are iptables version
2350 >= 1.3.5 and linux kernel >= 2.6.16. This script obsoletes
b6b90b68 2351 the _updown_espmark template, so that no INPUT mangle rules
997358a6
MW
2352 are required any more.
2353
2354- added support of DPD restart mode
2355
2356- ipsec starter now allows the use of wildcards in include
2357 statements as e.g. in "include /etc/my_ipsec/*.conf".
2358 Patch courtesy of Matthias Haas.
2359
2360- the Netscape OID 'employeeNumber' is now recognized and can be
2361 used as a Relative Distinguished Name in certificates.
2362
2363
2364strongswan-2.6.3
2365----------------
2366
b6b90b68 2367- /etc/init.d/ipsec or /etc/rc.d/ipsec is now a copy of the ipsec
997358a6
MW
2368 command and not of ipsec setup any more.
2369
2370- ipsec starter now supports AH authentication in conjunction with
2371 ESP encryption. AH authentication is configured in ipsec.conf
2372 via the auth=ah parameter.
b6b90b68 2373
997358a6
MW
2374- The command ipsec scencrypt|scdecrypt <args> is now an alias for
2375 ipsec whack --scencrypt|scdecrypt <args>.
2376
2377- get_sa_info() now determines for the native netkey IPsec stack
2378 the exact time of the last use of an active eroute. This information
2379 is used by the Dead Peer Detection algorithm and is also displayed by
2380 the ipsec status command.
b6b90b68 2381
997358a6
MW
2382
2383strongswan-2.6.2
2384----------------
2385
2386- running under the native Linux 2.6 IPsec stack, the function
2387 get_sa_info() is called by ipsec auto --status to display the current
2388 number of transmitted bytes per IPsec SA.
2389
2390- get_sa_info() is also used by the Dead Peer Detection process to detect
2391 recent ESP activity. If ESP traffic was received from the peer within
2392 the last dpd_delay interval then no R_Y_THERE notification must be sent.
2393
2394- strongSwan now supports the Relative Distinguished Name "unstructuredName"
2395 in ID_DER_ASN1_DN identities. The following notations are possible:
2396
2397 rightid="unstructuredName=John Doe"
2398 rightid="UN=John Doe"
2399
2400- fixed a long-standing bug which caused PSK-based roadwarrior connections
2401 to segfault in the function id.c:same_id() called by keys.c:get_secret()
2402 if an FQDN, USER_FQDN, or Key ID was defined, as in the following example.
2403
2404 conn rw
2405 right=%any
2406 rightid=@foo.bar
2407 authby=secret
2408
2409- the ipsec command now supports most ipsec auto commands (e.g. ipsec listall).
2410
2411- ipsec starter didn't set host_addr and client.addr ports in whack msg.
2412
2413- in order to guarantee backwards-compatibility with the script-based
2414 auto function (e.g. auto --replace), the ipsec starter scripts stores
2415 the defaultroute information in the temporary file /var/run/ipsec.info.
2416
2417- The compile-time option USE_XAUTH_VID enables the sending of the XAUTH
2418 Vendor ID which is expected by Cisco PIX 7 boxes that act as IKE Mode Config
2419 servers.
2420
2421- the ipsec starter now also recognizes the parameters authby=never and
2422 type=passthrough|pass|drop|reject.
2423
2424
2425strongswan-2.6.1
2426----------------
2427
2428- ipsec starter now supports the also parameter which allows
2429 a modular structure of the connection definitions. Thus
2430 "ipsec start" is now ready to replace "ipsec setup".
2431
2432
2433strongswan-2.6.0
2434----------------
2435
2436- Mathieu Lafon's popular ipsec starter tool has been added to the
2437 strongSwan distribution. Many thanks go to Stephan Scholz from astaro
2438 for his integration work. ipsec starter is a C program which is going
2439 to replace the various shell and awk starter scripts (setup, _plutoload,
2440 _plutostart, _realsetup, _startklips, _confread, and auto). Since
2441 ipsec.conf is now parsed only once, the starting of multiple tunnels is
2442 accelerated tremedously.
2443
2444- Added support of %defaultroute to the ipsec starter. If the IP address
b6b90b68 2445 changes, a HUP signal to the ipsec starter will automatically
997358a6
MW
2446 reload pluto's connections.
2447
2448- moved most compile time configurations from pluto/Makefile to
2449 Makefile.inc by defining the options USE_LIBCURL, USE_LDAP,
2450 USE_SMARTCARD, and USE_NAT_TRAVERSAL_TRANSPORT_MODE.
2451
2452- removed the ipsec verify and ipsec newhostkey commands
2453
2454- fixed some 64-bit issues in formatted print statements
2455
2456- The scepclient functionality implementing the Simple Certificate
2457 Enrollment Protocol (SCEP) is nearly complete but hasn't been
2458 documented yet.
2459
2460
2461strongswan-2.5.7
2462----------------
2463
2464- CA certicates are now automatically loaded from a smartcard
2465 or USB crypto token and appear in the ipsec auto --listcacerts
2466 listing.
2467
2468
2469strongswan-2.5.6
2470----------------
2471
2472- when using "ipsec whack --scencrypt <data>" with a PKCS#11
2473 library that does not support the C_Encrypt() Cryptoki
2474 function (e.g. OpenSC), the RSA encryption is done in
2475 software using the public key fetched from the smartcard.
2476
b6b90b68 2477- The scepclient function now allows to define the
997358a6
MW
2478 validity of a self-signed certificate using the --days,
2479 --startdate, and --enddate options. The default validity
2480 has been changed from one year to five years.
2481
2482
2483strongswan-2.5.5
2484----------------
2485
2486- the config setup parameter pkcs11proxy=yes opens pluto's PKCS#11
2487 interface to other applications for RSA encryption and decryption
2488 via the whack interface. Notation:
2489
2490 ipsec whack --scencrypt <data>
2491 [--inbase 16|hex|64|base64|256|text|ascii]
2492 [--outbase 16|hex|64|base64|256|text|ascii]
2493 [--keyid <keyid>]
2494
2495 ipsec whack --scdecrypt <data>
2496 [--inbase 16|hex|64|base64|256|text|ascii]
2497 [--outbase 16|hex|64|base64|256|text|ascii]
2498 [--keyid <keyid>]
2499
b6b90b68 2500 The default setting for inbase and outbase is hex.
997358a6
MW
2501
2502 The new proxy interface can be used for securing symmetric
2503 encryption keys required by the cryptoloop or dm-crypt
2504 disk encryption schemes, especially in the case when
2505 pkcs11keepstate=yes causes pluto to lock the pkcs11 slot
2506 permanently.
2507
2508- if the file /etc/ipsec.secrets is lacking during the startup of
2509 pluto then the root-readable file /etc/ipsec.d/private/myKey.der
2510 containing a 2048 bit RSA private key and a matching self-signed
2511 certificate stored in the file /etc/ipsec.d/certs/selfCert.der
2512 is automatically generated by calling the function
2513
2514 ipsec scepclient --out pkcs1 --out cert-self
2515
2516 scepclient was written by Jan Hutter and Martin Willi, students
2517 at the University of Applied Sciences in Rapperswil, Switzerland.
2518
2519
2520strongswan-2.5.4
2521----------------
2522
2523- the current extension of the PKCS#7 framework introduced
2524 a parsing error in PKCS#7 wrapped X.509 certificates that are
2525 e.g. transmitted by Windows XP when multi-level CAs are used.
2526 the parsing syntax has been fixed.
2527
2528- added a patch by Gerald Richter which tolerates multiple occurrences
2529 of the ipsec0 interface when using KLIPS.
2530
2531
2532strongswan-2.5.3
2533----------------
2534
2535- with gawk-3.1.4 the word "default2 has become a protected
2536 keyword for use in switch statements and cannot be used any
2537 more in the strongSwan scripts. This problem has been
2538 solved by renaming "default" to "defaults" and "setdefault"
2539 in the scripts _confread and auto, respectively.
2540
2541- introduced the parameter leftsendcert with the values
2542
2543 always|yes (the default, always send a cert)
2544 ifasked (send the cert only upon a cert request)
2545 never|no (never send a cert, used for raw RSA keys and
b6b90b68 2546 self-signed certs)
997358a6
MW
2547
2548- fixed the initialization of the ESP key length to a default of
2549 128 bits in the case that the peer does not send a key length
2550 attribute for AES encryption.
2551
2552- applied Herbert Xu's uniqueIDs patch
2553
2554- applied Herbert Xu's CLOEXEC patches
2555
2556
2557strongswan-2.5.2
2558----------------
2559
2560- CRLs can now be cached also in the case when the issuer's
2561 certificate does not contain a subjectKeyIdentifier field.
2562 In that case the subjectKeyIdentifier is computed by pluto as the
2563 160 bit SHA-1 hash of the issuer's public key in compliance
2564 with section 4.2.1.2 of RFC 3280.
2565
2566- Fixed a bug introduced by strongswan-2.5.1 which eliminated
2567 not only multiple Quick Modes of a given connection but also
2568 multiple connections between two security gateways.
2569
2570
2571strongswan-2.5.1
2572----------------
2573
2574- Under the native IPsec of the Linux 2.6 kernel, a %trap eroute
2575 installed either by setting auto=route in ipsec.conf or by
2576 a connection put into hold, generates an XFRM_AQUIRE event
2577 for each packet that wants to use the not-yet exisiting
2578 tunnel. Up to now each XFRM_AQUIRE event led to an entry in
2579 the Quick Mode queue, causing multiple IPsec SA to be
2580 established in rapid succession. Starting with strongswan-2.5.1
2581 only a single IPsec SA is established per host-pair connection.
2582
2583- Right after loading the PKCS#11 module, all smartcard slots are
2584 searched for certificates. The result can be viewed using
2585 the command
2586
2587 ipsec auto --listcards
2588
2589 The certificate objects found in the slots are numbered
2590 starting with #1, #2, etc. This position number can be used to address
2591 certificates (leftcert=%smartcard) and keys (: PIN %smartcard)
2592 in ipsec.conf and ipsec.secrets, respectively:
2593
2594 %smartcard (selects object #1)
2595 %smartcard#1 (selects object #1)
2596 %smartcard#3 (selects object #3)
2597
2598 As an alternative the existing retrieval scheme can be used:
2599
2600 %smartcard:45 (selects object with id=45)
2601 %smartcard0 (selects first object in slot 0)
2602 %smartcard4:45 (selects object in slot 4 with id=45)
2603
2604- Depending on the settings of CKA_SIGN and CKA_DECRYPT
2605 private key flags either C_Sign() or C_Decrypt() is used
2606 to generate a signature.
2607
2608- The output buffer length parameter siglen in C_Sign()
2609 is now initialized to the actual size of the output
2610 buffer prior to the function call. This fixes the
2611 CKR_BUFFER_TOO_SMALL error that could occur when using
2612 the OpenSC PKCS#11 module.
2613
2614- Changed the initialization of the PKCS#11 CK_MECHANISM in
2615 C_SignInit() to mech = { CKM_RSA_PKCS, NULL_PTR, 0 }.
2616
2617- Refactored the RSA public/private key code and transferred it
2618 from keys.c to the new pkcs1.c file as a preparatory step
2619 towards the release of the SCEP client.
2620
2621
2622strongswan-2.5.0
2623----------------
2624
2625- The loading of a PKCS#11 smartcard library module during
2626 runtime does not require OpenSC library functions any more
2627 because the corresponding code has been integrated into
2628 smartcard.c. Also the RSAREF pkcs11 header files have been
2629 included in a newly created pluto/rsaref directory so that
2630 no external include path has to be defined any longer.
2631
2632- A long-awaited feature has been implemented at last:
2633 The local caching of CRLs fetched via HTTP or LDAP, activated
2634 by the parameter cachecrls=yes in the config setup section
2635 of ipsec.conf. The dynamically fetched CRLs are stored under
2636 a unique file name containing the issuer's subjectKeyID
2637 in /etc/ipsec.d/crls.
b6b90b68 2638
997358a6
MW
2639- Applied a one-line patch courtesy of Michael Richardson
2640 from the Openswan project which fixes the kernel-oops
2641 in KLIPS when an snmp daemon is running on the same box.
2642
2643
2644strongswan-2.4.4
2645----------------
2646
2647- Eliminated null length CRL distribution point strings.
2648
2649- Fixed a trust path evaluation bug introduced with 2.4.3
2650
2651
2652strongswan-2.4.3
2653----------------
2654
2655- Improved the joint OCSP / CRL revocation policy.
2656 OCSP responses have precedence over CRL entries.
2657
2658- Introduced support of CRLv2 reason codes.
2659
2660- Fixed a bug with key-pad equipped readers which caused
2661 pluto to prompt for the pin via the console when the first
2662 occasion to enter the pin via the key-pad was missed.
2663
2664- When pluto is built with LDAP_V3 enabled, the library
2665 liblber required by newer versions of openldap is now
2666 included.
2667
2668
2669strongswan-2.4.2
2670----------------
2671
2672- Added the _updown_espmark template which requires all
2673 incoming ESP traffic to be marked with a default mark
2674 value of 50.
b6b90b68 2675
997358a6
MW
2676- Introduced the pkcs11keepstate parameter in the config setup
2677 section of ipsec.conf. With pkcs11keepstate=yes the PKCS#11
b6b90b68 2678 session and login states are kept as long as possible during
997358a6
MW
2679 the lifetime of pluto. This means that a PIN entry via a key
2680 pad has to be done only once.
2681
2682- Introduced the pkcs11module parameter in the config setup
2683 section of ipsec.conf which specifies the PKCS#11 module
2684 to be used with smart cards. Example:
b6b90b68 2685
997358a6 2686 pkcs11module=/usr/lib/pkcs11/opensc-pkcs11.lo
b6b90b68 2687
997358a6
MW
2688- Added support of smartcard readers equipped with a PIN pad.
2689
2690- Added patch by Jay Pfeifer which detects when netkey
2691 modules have been statically built into the Linux 2.6 kernel.
2692
2693- Added two patches by Herbert Xu. The first uses ip xfrm
2694 instead of setkey to flush the IPsec policy database. The
2695 second sets the optional flag in inbound IPComp SAs only.
b6b90b68 2696
997358a6
MW
2697- Applied Ulrich Weber's patch which fixes an interoperability
2698 problem between native IPsec and KLIPS systems caused by
2699 setting the replay window to 32 instead of 0 for ipcomp.
2700
2701
2702strongswan-2.4.1
2703----------------
2704
2705- Fixed a bug which caused an unwanted Mode Config request
2706 to be initiated in the case where "right" was used to denote
2707 the local side in ipsec.conf and "left" the remote side,
2708 contrary to the recommendation that "right" be remote and
2709 "left" be"local".
2710
2711
2712strongswan-2.4.0a
2713-----------------
2714
2715- updated Vendor ID to strongSwan-2.4.0
2716
2717- updated copyright statement to include David Buechi and
2718 Michael Meier
b6b90b68
MW
2719
2720
997358a6
MW
2721strongswan-2.4.0
2722----------------
2723
2724- strongSwan now communicates with attached smartcards and
2725 USB crypto tokens via the standardized PKCS #11 interface.
2726 By default the OpenSC library from www.opensc.org is used
2727 but any other PKCS#11 library could be dynamically linked.
2728 strongSwan's PKCS#11 API was implemented by David Buechi
2729 and Michael Meier, both graduates of the Zurich University
2730 of Applied Sciences in Winterthur, Switzerland.
2731
2732- When a %trap eroute is triggered by an outgoing IP packet
2733 then the native IPsec stack of the Linux 2.6 kernel [often/
2734 always?] returns an XFRM_ACQUIRE message with an undefined
2735 protocol family field and the connection setup fails.
2736 As a workaround IPv4 (AF_INET) is now assumed.
b6b90b68
MW
2737
2738- the results of the UML test scenarios are now enhanced
997358a6 2739 with block diagrams of the virtual network topology used
b6b90b68 2740 in a particular test.
997358a6
MW
2741
2742
2743strongswan-2.3.2
2744----------------
2745
2746- fixed IV used to decrypt informational messages.
2747 This bug was introduced with Mode Config functionality.
b6b90b68 2748
997358a6
MW
2749- fixed NCP Vendor ID.
2750
2751- undid one of Ulrich Weber's maximum udp size patches
2752 because it caused a segmentation fault with NAT-ed
2753 Delete SA messages.
b6b90b68 2754
997358a6
MW
2755- added UML scenarios wildcards and attr-cert which
2756 demonstrate the implementation of IPsec policies based
2757 on wildcard parameters contained in Distinguished Names and
2758 on X.509 attribute certificates, respectively.
2759
2760
2761strongswan-2.3.1
2762----------------
2763
2764- Added basic Mode Config functionality
2765
2766- Added Mathieu Lafon's patch which upgrades the status of
2767 the NAT-Traversal implementation to RFC 3947.
b6b90b68 2768
997358a6
MW
2769- The _startklips script now also loads the xfrm4_tunnel
2770 module.
b6b90b68 2771
997358a6
MW
2772- Added Ulrich Weber's netlink replay window size and
2773 maximum udp size patches.
2774
2775- UML testing now uses the Linux 2.6.10 UML kernel by default.
b6b90b68 2776
997358a6
MW
2777
2778strongswan-2.3.0
2779----------------
2780
2781- Eric Marchionni and Patrik Rayo, both recent graduates from
2782 the Zuercher Hochschule Winterthur in Switzerland, created a
2783 User-Mode-Linux test setup for strongSwan. For more details
2784 please read the INSTALL and README documents in the testing
2785 subdirectory.
2786
2787- Full support of group attributes based on X.509 attribute
b6b90b68 2788 certificates. Attribute certificates can be generated
997358a6 2789 using the openac facility. For more details see
b6b90b68 2790
997358a6 2791 man ipsec_openac.
b6b90b68 2792
997358a6
MW
2793 The group attributes can be used in connection definitions
2794 in order to give IPsec access to specific user groups.
2795 This is done with the new parameter left|rightgroups as in
b6b90b68 2796
997358a6
MW
2797 rightgroups="Research, Sales"
2798
2799 giving access to users possessing the group attributes
2800 Research or Sales, only.
2801
2802- In Quick Mode clients with subnet mask /32 are now
b6b90b68 2803 coded as IP_V4_ADDRESS or IP_V6_ADDRESS. This should
997358a6
MW
2804 fix rekeying problems with the SafeNet/SoftRemote and NCP
2805 Secure Entry Clients.
2806
2807- Changed the defaults of the ikelifetime and keylife parameters
2808 to 3h and 1h, respectively. The maximum allowable values are
2809 now both set to 24 h.
2810
2811- Suppressed notification wars between two IPsec peers that
2812 could e.g. be triggered by incorrect ISAKMP encryption.
2813
2814- Public RSA keys can now have identical IDs if either the
2815 issuing CA or the serial number is different. The serial
2816 number of a certificate is now shown by the command
b6b90b68 2817
997358a6
MW
2818 ipsec auto --listpubkeys
2819
2820
2821strongswan-2.2.2
2822----------------
2823
2824- Added Tuomo Soini's sourceip feature which allows a strongSwan
2825 roadwarrior to use a fixed Virtual IP (see README section 2.6)
2826 and reduces the well-known four tunnel case on VPN gateways to
2827 a single tunnel definition (see README section 2.4).
2828
f3bb1bd0 2829- Fixed a bug occurring with NAT-Traversal enabled when the responder
997358a6
MW
2830 suddenly turns initiator and the initiator cannot find a matching
2831 connection because of the floated IKE port 4500.
b6b90b68 2832
997358a6
MW
2833- Removed misleading ipsec verify command from barf.
2834
2835- Running under the native IP stack, ipsec --version now shows
2836 the Linux kernel version (courtesy to the Openswan project).
2837
2838
2839strongswan-2.2.1
2840----------------
2841
2842- Introduced the ipsec auto --listalgs monitoring command which lists
2843 all currently registered IKE and ESP algorithms.
2844
f3bb1bd0 2845- Fixed a bug in the ESP algorithm selection occurring when the strict flag
997358a6 2846 is set and the first proposed transform does not match.
b6b90b68 2847
997358a6 2848- Fixed another deadlock in the use of the lock_certs_and_keys() mutex,
f3bb1bd0 2849 occurring when a smartcard is present.
997358a6
MW
2850
2851- Prevented that a superseded Phase1 state can trigger a DPD_TIMEOUT event.
b6b90b68 2852
997358a6
MW
2853- Fixed the printing of the notification names (null)
2854
2855- Applied another of Herbert Xu's Netlink patches.
2856
2857
2858strongswan-2.2.0
2859----------------
2860
2861- Support of Dead Peer Detection. The connection parameter
2862
2863 dpdaction=clear|hold
b6b90b68 2864
997358a6
MW
2865 activates DPD for the given connection.
2866
2867- The default Opportunistic Encryption (OE) policy groups are not
2868 automatically included anymore. Those wishing to activate OE can include
2869 the policy group with the following statement in ipsec.conf:
b6b90b68 2870
997358a6 2871 include /etc/ipsec.d/examples/oe.conf
b6b90b68 2872
997358a6
MW
2873 The default for [right|left]rsasigkey is now set to %cert.
2874
2875- strongSwan now has a Vendor ID of its own which can be activated
2876 using the compile option VENDORID
2877
2878- Applied Herbert Xu's patch which sets the compression algorithm correctly.
2879
2880- Applied Herbert Xu's patch fixing an ESPINUDP problem
2881
2882- Applied Herbert Xu's patch setting source/destination port numbers.
2883
2884- Reapplied one of Herbert Xu's NAT-Traversal patches which got
2885 lost during the migration from SuperFreeS/WAN.
b6b90b68 2886
997358a6
MW
2887- Fixed a deadlock in the use of the lock_certs_and_keys() mutex.
2888
2889- Fixed the unsharing of alg parameters when instantiating group
2890 connection.
b6b90b68 2891
997358a6
MW
2892
2893strongswan-2.1.5
2894----------------
2895
2896- Thomas Walpuski made me aware of a potential DoS attack via
2897 a PKCS#7-wrapped certificate bundle which could overwrite valid CA
2898 certificates in Pluto's authority certificate store. This vulnerability
2899 was fixed by establishing trust in CA candidate certificates up to a
2900 trusted root CA prior to insertion into Pluto's chained list.
2901
2902- replaced the --assign option by the -v option in the auto awk script
2903 in order to make it run with mawk under debian/woody.
2904
2905
2906strongswan-2.1.4
2907----------------
2908
2909- Split of the status information between ipsec auto --status (concise)
2910 and ipsec auto --statusall (verbose). Both commands can be used with
2911 an optional connection selector:
2912
2913 ipsec auto --status[all] <connection_name>
2914
2915- Added the description of X.509 related features to the ipsec_auto(8)
2916 man page.
2917
2918- Hardened the ASN.1 parser in debug mode, especially the printing
2919 of malformed distinguished names.
2920
2921- The size of an RSA public key received in a certificate is now restricted to
2922
2923 512 bits <= modulus length <= 8192 bits.
2924
2925- Fixed the debug mode enumeration.
2926
2927
2928strongswan-2.1.3
2929----------------
2930
2931- Fixed another PKCS#7 vulnerability which could lead to an
2932 endless loop while following the X.509 trust chain.
b6b90b68 2933
997358a6
MW
2934
2935strongswan-2.1.2
2936----------------
2937
2938- Fixed the PKCS#7 vulnerability discovered by Thomas Walpuski
2939 that accepted end certificates having identical issuer and subject
2940 distinguished names in a multi-tier X.509 trust chain.
b6b90b68 2941
997358a6
MW
2942
2943strongswan-2.1.1
2944----------------
2945
2946- Removed all remaining references to ipsec_netlink.h in KLIPS.
2947
2948
2949strongswan-2.1.0
2950----------------
2951
2952- The new "ca" section allows to define the following parameters:
2953
2954 ca kool
2955 cacert=koolCA.pem # cacert of kool CA
2956 ocspuri=http://ocsp.kool.net:8001 # ocsp server
2957 ldapserver=ldap.kool.net # default ldap server
2958 crluri=http://www.kool.net/kool.crl # crl distribution point
2959 crluri2="ldap:///O=Kool, C= .." # crl distribution point #2
2960 auto=add # add, ignore
b6b90b68 2961
997358a6 2962 The ca definitions can be monitored via the command
b6b90b68 2963
997358a6
MW
2964 ipsec auto --listcainfos
2965
2966- Fixed cosmetic corruption of /proc filesystem by integrating
2967 D. Hugh Redelmeier's freeswan-2.06 kernel fixes.
2968
2969
2970strongswan-2.0.2
2971----------------
2972
2973- Added support for the 818043 NAT-Traversal update of Microsoft's
2974 Windows 2000/XP IPsec client which sends an ID_FQDN during Quick Mode.
b6b90b68
MW
2975
2976- A symbolic link to libcrypto is now added in the kernel sources
997358a6 2977 during kernel compilation
b6b90b68 2978
997358a6
MW
2979- Fixed a couple of 64 bit issues (mostly casts to int).
2980 Thanks to Ken Bantoft who checked my sources on a 64 bit platform.
2981
2982- Replaced s[n]printf() statements in the kernel by ipsec_snprintf().
2983 Credits go to D. Hugh Redelmeier, Michael Richardson, and Sam Sgro
2984 of the FreeS/WAN team who solved this problem with the 2.4.25 kernel.
2985
2986
2987strongswan-2.0.1
2988----------------
2989
2990- an empty ASN.1 SEQUENCE OF or SET OF object (e.g. a subjectAltName
2991 certificate extension which contains no generalName item) can cause
2992 a pluto crash. This bug has been fixed. Additionally the ASN.1 parser has
2993 been hardened to make it more robust against malformed ASN.1 objects.
2994
2995- applied Herbert Xu's NAT-T patches which fixes NAT-T under the native
2996 Linux 2.6 IPsec stack.
b6b90b68
MW
2997
2998
997358a6
MW
2999strongswan-2.0.0
3000----------------
3001
3002- based on freeswan-2.04, x509-1.5.3, nat-0.6c, alg-0.8.1rc12