]>
Commit | Line | Data |
---|---|---|
eae7ae18 M |
1 | /* |
2 | * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify | |
5 | * it under the terms of the GNU General Public License version 2 as | |
6 | * published by the Free Software Foundation. | |
7 | */ | |
8 | /dts-v1/; | |
9 | ||
10 | #include "dra74x.dtsi" | |
11 | #include <dt-bindings/gpio/gpio.h> | |
12 | #include <dt-bindings/interrupt-controller/irq.h> | |
13 | ||
14 | / { | |
15 | model = "TI AM5728 BeagleBoard-X15"; | |
16 | compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; | |
17 | ||
18 | chosen { | |
19 | stdout-path = &uart3; | |
20 | }; | |
21 | ||
22 | aliases { | |
23 | rtc0 = &mcp_rtc; | |
24 | rtc1 = &tps659038_rtc; | |
25 | rtc2 = &rtc; | |
26 | display0 = &hdmi0; | |
27 | }; | |
28 | ||
29 | memory { | |
30 | device_type = "memory"; | |
31 | reg = <0x80000000 0x80000000>; | |
32 | }; | |
33 | ||
34 | vdd_3v3: fixedregulator-vdd_3v3 { | |
35 | compatible = "regulator-fixed"; | |
36 | regulator-name = "vdd_3v3"; | |
37 | vin-supply = <®en1>; | |
38 | regulator-min-microvolt = <3300000>; | |
39 | regulator-max-microvolt = <3300000>; | |
40 | }; | |
41 | ||
42 | vtt_fixed: fixedregulator-vtt { | |
43 | /* TPS51200 */ | |
44 | compatible = "regulator-fixed"; | |
45 | regulator-name = "vtt_fixed"; | |
46 | vin-supply = <&smps3_reg>; | |
47 | regulator-min-microvolt = <3300000>; | |
48 | regulator-max-microvolt = <3300000>; | |
49 | regulator-always-on; | |
50 | regulator-boot-on; | |
51 | enable-active-high; | |
52 | gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; | |
53 | }; | |
54 | ||
55 | leds { | |
56 | compatible = "gpio-leds"; | |
57 | pinctrl-names = "default"; | |
58 | pinctrl-0 = <&leds_pins_default>; | |
59 | ||
60 | led@0 { | |
61 | label = "beagle-x15:usr0"; | |
62 | gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; | |
63 | linux,default-trigger = "heartbeat"; | |
64 | default-state = "off"; | |
65 | }; | |
66 | ||
67 | led@1 { | |
68 | label = "beagle-x15:usr1"; | |
69 | gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; | |
70 | linux,default-trigger = "cpu0"; | |
71 | default-state = "off"; | |
72 | }; | |
73 | ||
74 | led@2 { | |
75 | label = "beagle-x15:usr2"; | |
76 | gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>; | |
77 | linux,default-trigger = "mmc0"; | |
78 | default-state = "off"; | |
79 | }; | |
80 | ||
81 | led@3 { | |
82 | label = "beagle-x15:usr3"; | |
83 | gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; | |
84 | linux,default-trigger = "ide-disk"; | |
85 | default-state = "off"; | |
86 | }; | |
87 | }; | |
88 | ||
89 | gpio_fan: gpio_fan { | |
90 | /* Based on 5v 500mA AFB02505HHB */ | |
91 | compatible = "gpio-fan"; | |
92 | gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>; | |
93 | gpio-fan,speed-map = <0 0>, | |
94 | <13000 1>; | |
95 | #cooling-cells = <2>; | |
96 | }; | |
97 | ||
98 | extcon_usb1: extcon_usb1 { | |
99 | compatible = "linux,extcon-usb-gpio"; | |
100 | id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; | |
101 | pinctrl-names = "default"; | |
102 | pinctrl-0 = <&extcon_usb1_pins>; | |
103 | }; | |
104 | ||
105 | extcon_usb2: extcon_usb2 { | |
106 | compatible = "linux,extcon-usb-gpio"; | |
107 | id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>; | |
108 | pinctrl-names = "default"; | |
109 | pinctrl-0 = <&extcon_usb2_pins>; | |
110 | }; | |
111 | ||
112 | hdmi0: connector { | |
113 | compatible = "hdmi-connector"; | |
114 | label = "hdmi"; | |
115 | ||
116 | type = "a"; | |
117 | ||
118 | port { | |
119 | hdmi_connector_in: endpoint { | |
120 | remote-endpoint = <&tpd12s015_out>; | |
121 | }; | |
122 | }; | |
123 | }; | |
124 | ||
125 | tpd12s015: encoder { | |
126 | compatible = "ti,tpd12s015"; | |
127 | ||
128 | pinctrl-names = "default"; | |
129 | pinctrl-0 = <&tpd12s015_pins>; | |
130 | ||
131 | gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ | |
132 | <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ | |
133 | <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ | |
134 | ||
135 | ports { | |
136 | #address-cells = <1>; | |
137 | #size-cells = <0>; | |
138 | ||
139 | port@0 { | |
140 | reg = <0>; | |
141 | ||
142 | tpd12s015_in: endpoint { | |
143 | remote-endpoint = <&hdmi_out>; | |
144 | }; | |
145 | }; | |
146 | ||
147 | port@1 { | |
148 | reg = <1>; | |
149 | ||
150 | tpd12s015_out: endpoint { | |
151 | remote-endpoint = <&hdmi_connector_in>; | |
152 | }; | |
153 | }; | |
154 | }; | |
155 | }; | |
156 | }; | |
157 | ||
158 | &dra7_pmx_core { | |
159 | leds_pins_default: leds_pins_default { | |
160 | pinctrl-single,pins = < | |
161 | 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */ | |
162 | 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */ | |
163 | 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */ | |
164 | 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */ | |
165 | >; | |
166 | }; | |
167 | ||
168 | i2c1_pins_default: i2c1_pins_default { | |
169 | pinctrl-single,pins = < | |
170 | 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ | |
171 | 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ | |
172 | >; | |
173 | }; | |
174 | ||
175 | hdmi_pins: pinmux_hdmi_pins { | |
176 | pinctrl-single,pins = < | |
177 | 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ | |
178 | 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ | |
179 | >; | |
180 | }; | |
181 | ||
182 | i2c3_pins_default: i2c3_pins_default { | |
183 | pinctrl-single,pins = < | |
184 | 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ | |
185 | 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ | |
186 | >; | |
187 | }; | |
188 | ||
189 | uart3_pins_default: uart3_pins_default { | |
190 | pinctrl-single,pins = < | |
191 | 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ | |
192 | 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ | |
193 | >; | |
194 | }; | |
195 | ||
196 | mmc1_pins_default: mmc1_pins_default { | |
197 | pinctrl-single,pins = < | |
198 | 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ | |
199 | 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ | |
200 | 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ | |
201 | 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ | |
202 | 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ | |
203 | 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ | |
204 | 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ | |
205 | >; | |
206 | }; | |
207 | ||
208 | mmc2_pins_default: mmc2_pins_default { | |
209 | pinctrl-single,pins = < | |
210 | 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ | |
211 | 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ | |
212 | 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ | |
213 | 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ | |
214 | 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ | |
215 | 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ | |
216 | 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ | |
217 | 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ | |
218 | 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ | |
219 | 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ | |
220 | >; | |
221 | }; | |
222 | ||
223 | cpsw_pins_default: cpsw_pins_default { | |
224 | pinctrl-single,pins = < | |
225 | /* Slave 1 */ | |
226 | 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ | |
227 | 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ | |
228 | 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ | |
229 | 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ | |
230 | 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ | |
231 | 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ | |
232 | 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ | |
233 | 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ | |
234 | 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ | |
235 | 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ | |
236 | 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ | |
237 | 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ | |
238 | ||
239 | /* Slave 2 */ | |
240 | 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ | |
241 | 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ | |
242 | 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ | |
243 | 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ | |
244 | 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ | |
245 | 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ | |
246 | 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ | |
247 | 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ | |
248 | 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ | |
249 | 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ | |
250 | 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ | |
251 | 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ | |
252 | >; | |
253 | ||
254 | }; | |
255 | ||
256 | cpsw_pins_sleep: cpsw_pins_sleep { | |
257 | pinctrl-single,pins = < | |
258 | /* Slave 1 */ | |
259 | 0x250 (PIN_INPUT | MUX_MODE15) | |
260 | 0x254 (PIN_INPUT | MUX_MODE15) | |
261 | 0x258 (PIN_INPUT | MUX_MODE15) | |
262 | 0x25c (PIN_INPUT | MUX_MODE15) | |
263 | 0x260 (PIN_INPUT | MUX_MODE15) | |
264 | 0x264 (PIN_INPUT | MUX_MODE15) | |
265 | 0x268 (PIN_INPUT | MUX_MODE15) | |
266 | 0x26c (PIN_INPUT | MUX_MODE15) | |
267 | 0x270 (PIN_INPUT | MUX_MODE15) | |
268 | 0x274 (PIN_INPUT | MUX_MODE15) | |
269 | 0x278 (PIN_INPUT | MUX_MODE15) | |
270 | 0x27c (PIN_INPUT | MUX_MODE15) | |
271 | ||
272 | /* Slave 2 */ | |
273 | 0x198 (PIN_INPUT | MUX_MODE15) | |
274 | 0x19c (PIN_INPUT | MUX_MODE15) | |
275 | 0x1a0 (PIN_INPUT | MUX_MODE15) | |
276 | 0x1a4 (PIN_INPUT | MUX_MODE15) | |
277 | 0x1a8 (PIN_INPUT | MUX_MODE15) | |
278 | 0x1ac (PIN_INPUT | MUX_MODE15) | |
279 | 0x1b0 (PIN_INPUT | MUX_MODE15) | |
280 | 0x1b4 (PIN_INPUT | MUX_MODE15) | |
281 | 0x1b8 (PIN_INPUT | MUX_MODE15) | |
282 | 0x1bc (PIN_INPUT | MUX_MODE15) | |
283 | 0x1c0 (PIN_INPUT | MUX_MODE15) | |
284 | 0x1c4 (PIN_INPUT | MUX_MODE15) | |
285 | >; | |
286 | }; | |
287 | ||
288 | davinci_mdio_pins_default: davinci_mdio_pins_default { | |
289 | pinctrl-single,pins = < | |
290 | /* MDIO */ | |
291 | 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */ | |
292 | 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */ | |
293 | >; | |
294 | }; | |
295 | ||
296 | davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { | |
297 | pinctrl-single,pins = < | |
298 | 0x23c (PIN_INPUT | MUX_MODE15) | |
299 | 0x240 (PIN_INPUT | MUX_MODE15) | |
300 | >; | |
301 | }; | |
302 | ||
303 | tps659038_pins_default: tps659038_pins_default { | |
304 | pinctrl-single,pins = < | |
305 | 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ | |
306 | >; | |
307 | }; | |
308 | ||
309 | tmp102_pins_default: tmp102_pins_default { | |
310 | pinctrl-single,pins = < | |
311 | 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */ | |
312 | >; | |
313 | }; | |
314 | ||
315 | mcp79410_pins_default: mcp79410_pins_default { | |
316 | pinctrl-single,pins = < | |
317 | 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ | |
318 | >; | |
319 | }; | |
320 | ||
321 | usb1_pins: pinmux_usb1_pins { | |
322 | pinctrl-single,pins = < | |
323 | 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ | |
324 | >; | |
325 | }; | |
326 | ||
327 | extcon_usb1_pins: extcon_usb1_pins { | |
328 | pinctrl-single,pins = < | |
329 | 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */ | |
330 | >; | |
331 | }; | |
332 | ||
333 | extcon_usb2_pins: extcon_usb2_pins { | |
334 | pinctrl-single,pins = < | |
335 | 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ | |
336 | >; | |
337 | }; | |
338 | ||
339 | tpd12s015_pins: pinmux_tpd12s015_pins { | |
340 | pinctrl-single,pins = < | |
341 | 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ | |
342 | 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ | |
343 | 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ | |
344 | >; | |
345 | }; | |
346 | }; | |
347 | ||
348 | &i2c1 { | |
349 | status = "okay"; | |
350 | pinctrl-names = "default"; | |
351 | pinctrl-0 = <&i2c1_pins_default>; | |
352 | clock-frequency = <400000>; | |
353 | ||
354 | tps659038: tps659038@58 { | |
355 | compatible = "ti,tps659038"; | |
356 | reg = <0x58>; | |
357 | interrupt-parent = <&gpio1>; | |
358 | interrupts = <0 IRQ_TYPE_LEVEL_LOW>; | |
359 | ||
360 | pinctrl-names = "default"; | |
361 | pinctrl-0 = <&tps659038_pins_default>; | |
362 | ||
363 | #interrupt-cells = <2>; | |
364 | interrupt-controller; | |
365 | ||
366 | ti,system-power-controller; | |
367 | ||
368 | tps659038_pmic { | |
369 | compatible = "ti,tps659038-pmic"; | |
370 | ||
371 | regulators { | |
372 | smps12_reg: smps12 { | |
373 | /* VDD_MPU */ | |
374 | regulator-name = "smps12"; | |
375 | regulator-min-microvolt = < 850000>; | |
376 | regulator-max-microvolt = <1250000>; | |
377 | regulator-always-on; | |
378 | regulator-boot-on; | |
379 | }; | |
380 | ||
381 | smps3_reg: smps3 { | |
382 | /* VDD_DDR */ | |
383 | regulator-name = "smps3"; | |
384 | regulator-min-microvolt = <1350000>; | |
385 | regulator-max-microvolt = <1350000>; | |
386 | regulator-always-on; | |
387 | regulator-boot-on; | |
388 | }; | |
389 | ||
390 | smps45_reg: smps45 { | |
391 | /* VDD_DSPEVE, VDD_IVA, VDD_GPU */ | |
392 | regulator-name = "smps45"; | |
393 | regulator-min-microvolt = < 850000>; | |
394 | regulator-max-microvolt = <1150000>; | |
395 | regulator-always-on; | |
396 | regulator-boot-on; | |
397 | }; | |
398 | ||
399 | smps6_reg: smps6 { | |
400 | /* VDD_CORE */ | |
401 | regulator-name = "smps6"; | |
402 | regulator-min-microvolt = <850000>; | |
403 | regulator-max-microvolt = <1030000>; | |
404 | regulator-always-on; | |
405 | regulator-boot-on; | |
406 | }; | |
407 | ||
408 | /* SMPS7 unused */ | |
409 | ||
410 | smps8_reg: smps8 { | |
411 | /* VDD_1V8 */ | |
412 | regulator-name = "smps8"; | |
413 | regulator-min-microvolt = <1800000>; | |
414 | regulator-max-microvolt = <1800000>; | |
415 | regulator-always-on; | |
416 | regulator-boot-on; | |
417 | }; | |
418 | ||
419 | /* SMPS9 unused */ | |
420 | ||
421 | ldo1_reg: ldo1 { | |
422 | /* VDD_SD */ | |
423 | regulator-name = "ldo1"; | |
424 | regulator-min-microvolt = <1800000>; | |
425 | regulator-max-microvolt = <3300000>; | |
426 | regulator-boot-on; | |
427 | }; | |
428 | ||
429 | ldo2_reg: ldo2 { | |
430 | /* VDD_SHV5 */ | |
431 | regulator-name = "ldo2"; | |
432 | regulator-min-microvolt = <3300000>; | |
433 | regulator-max-microvolt = <3300000>; | |
434 | regulator-always-on; | |
435 | regulator-boot-on; | |
436 | }; | |
437 | ||
438 | ldo3_reg: ldo3 { | |
439 | /* VDDA_1V8_PHY */ | |
440 | regulator-name = "ldo3"; | |
441 | regulator-min-microvolt = <1800000>; | |
442 | regulator-max-microvolt = <1800000>; | |
443 | regulator-always-on; | |
444 | regulator-boot-on; | |
445 | }; | |
446 | ||
447 | ldo9_reg: ldo9 { | |
448 | /* VDD_RTC */ | |
449 | regulator-name = "ldo9"; | |
450 | regulator-min-microvolt = <1050000>; | |
451 | regulator-max-microvolt = <1050000>; | |
452 | regulator-always-on; | |
453 | regulator-boot-on; | |
454 | }; | |
455 | ||
456 | ldoln_reg: ldoln { | |
457 | /* VDDA_1V8_PLL */ | |
458 | regulator-name = "ldoln"; | |
459 | regulator-min-microvolt = <1800000>; | |
460 | regulator-max-microvolt = <1800000>; | |
461 | regulator-always-on; | |
462 | regulator-boot-on; | |
463 | }; | |
464 | ||
465 | ldousb_reg: ldousb { | |
466 | /* VDDA_3V_USB: VDDA_USBHS33 */ | |
467 | regulator-name = "ldousb"; | |
468 | regulator-min-microvolt = <3300000>; | |
469 | regulator-max-microvolt = <3300000>; | |
470 | regulator-boot-on; | |
471 | }; | |
472 | ||
473 | regen1: regen1 { | |
474 | /* VDD_3V3_ON */ | |
475 | regulator-name = "regen1"; | |
476 | regulator-boot-on; | |
477 | regulator-always-on; | |
478 | }; | |
479 | }; | |
480 | }; | |
481 | ||
482 | tps659038_rtc: tps659038_rtc { | |
483 | compatible = "ti,palmas-rtc"; | |
484 | interrupt-parent = <&tps659038>; | |
485 | interrupts = <8 IRQ_TYPE_EDGE_FALLING>; | |
486 | wakeup-source; | |
487 | }; | |
488 | ||
489 | tps659038_pwr_button: tps659038_pwr_button { | |
490 | compatible = "ti,palmas-pwrbutton"; | |
491 | interrupt-parent = <&tps659038>; | |
492 | interrupts = <1 IRQ_TYPE_EDGE_FALLING>; | |
493 | wakeup-source; | |
494 | ti,palmas-long-press-seconds = <12>; | |
495 | }; | |
496 | ||
497 | tps659038_gpio: tps659038_gpio { | |
498 | compatible = "ti,palmas-gpio"; | |
499 | gpio-controller; | |
500 | #gpio-cells = <2>; | |
501 | }; | |
502 | }; | |
503 | ||
504 | tmp102: tmp102@48 { | |
505 | compatible = "ti,tmp102"; | |
506 | reg = <0x48>; | |
507 | pinctrl-names = "default"; | |
508 | pinctrl-0 = <&tmp102_pins_default>; | |
509 | interrupt-parent = <&gpio7>; | |
510 | interrupts = <16 IRQ_TYPE_LEVEL_LOW>; | |
511 | #thermal-sensor-cells = <1>; | |
512 | }; | |
513 | }; | |
514 | ||
515 | &i2c3 { | |
516 | status = "okay"; | |
517 | pinctrl-names = "default"; | |
518 | pinctrl-0 = <&i2c3_pins_default>; | |
519 | clock-frequency = <400000>; | |
520 | ||
521 | mcp_rtc: rtc@6f { | |
522 | compatible = "microchip,mcp7941x"; | |
523 | reg = <0x6f>; | |
524 | interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */ | |
525 | ||
526 | pinctrl-names = "default"; | |
527 | pinctrl-0 = <&mcp79410_pins_default>; | |
528 | ||
529 | vcc-supply = <&vdd_3v3>; | |
530 | wakeup-source; | |
531 | }; | |
532 | }; | |
533 | ||
534 | &gpio7 { | |
535 | ti,no-reset-on-init; | |
536 | ti,no-idle-on-init; | |
537 | }; | |
538 | ||
539 | &cpu0 { | |
540 | cpu0-supply = <&smps12_reg>; | |
541 | voltage-tolerance = <1>; | |
542 | }; | |
543 | ||
544 | &uart3 { | |
545 | status = "okay"; | |
546 | interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, | |
547 | <&dra7_pmx_core 0x3f8>; | |
548 | ||
549 | pinctrl-names = "default"; | |
550 | pinctrl-0 = <&uart3_pins_default>; | |
551 | }; | |
552 | ||
553 | &mac { | |
554 | status = "okay"; | |
555 | pinctrl-names = "default", "sleep"; | |
556 | pinctrl-0 = <&cpsw_pins_default>; | |
557 | pinctrl-1 = <&cpsw_pins_sleep>; | |
558 | dual_emac; | |
559 | }; | |
560 | ||
561 | &cpsw_emac0 { | |
562 | phy_id = <&davinci_mdio>, <1>; | |
563 | phy-mode = "rgmii"; | |
564 | dual_emac_res_vlan = <1>; | |
565 | }; | |
566 | ||
567 | &cpsw_emac1 { | |
568 | phy_id = <&davinci_mdio>, <2>; | |
569 | phy-mode = "rgmii"; | |
570 | dual_emac_res_vlan = <2>; | |
571 | }; | |
572 | ||
573 | &davinci_mdio { | |
574 | pinctrl-names = "default", "sleep"; | |
575 | pinctrl-0 = <&davinci_mdio_pins_default>; | |
576 | pinctrl-1 = <&davinci_mdio_pins_sleep>; | |
577 | }; | |
578 | ||
579 | &mmc1 { | |
580 | status = "okay"; | |
581 | ||
582 | pinctrl-names = "default"; | |
583 | pinctrl-0 = <&mmc1_pins_default>; | |
584 | ||
585 | vmmc-supply = <&ldo1_reg>; | |
586 | vmmc_aux-supply = <&vdd_3v3>; | |
587 | pbias-supply = <&pbias_mmc_reg>; | |
588 | bus-width = <4>; | |
e3614214 | 589 | cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ |
eae7ae18 M |
590 | }; |
591 | ||
592 | &mmc2 { | |
593 | status = "okay"; | |
594 | ||
595 | pinctrl-names = "default"; | |
596 | pinctrl-0 = <&mmc2_pins_default>; | |
597 | ||
598 | vmmc-supply = <&vdd_3v3>; | |
599 | bus-width = <8>; | |
600 | ti,non-removable; | |
601 | cap-mmc-dual-data-rate; | |
602 | }; | |
603 | ||
604 | &sata { | |
605 | status = "okay"; | |
606 | }; | |
607 | ||
608 | &usb2_phy1 { | |
609 | phy-supply = <&ldousb_reg>; | |
610 | }; | |
611 | ||
612 | &usb2_phy2 { | |
613 | phy-supply = <&ldousb_reg>; | |
614 | }; | |
615 | ||
616 | &usb1 { | |
617 | dr_mode = "host"; | |
618 | pinctrl-names = "default"; | |
619 | pinctrl-0 = <&usb1_pins>; | |
620 | }; | |
621 | ||
622 | &omap_dwc3_1 { | |
623 | extcon = <&extcon_usb1>; | |
624 | }; | |
625 | ||
626 | &omap_dwc3_2 { | |
627 | extcon = <&extcon_usb2>; | |
628 | }; | |
629 | ||
630 | &usb2 { | |
631 | dr_mode = "peripheral"; | |
632 | }; | |
633 | ||
634 | &cpu_trips { | |
635 | cpu_alert1: cpu_alert1 { | |
636 | temperature = <50000>; /* millicelsius */ | |
637 | hysteresis = <2000>; /* millicelsius */ | |
638 | type = "active"; | |
639 | }; | |
640 | }; | |
641 | ||
642 | &cpu_cooling_maps { | |
643 | map1 { | |
644 | trip = <&cpu_alert1>; | |
645 | cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; | |
646 | }; | |
647 | }; | |
648 | ||
649 | &thermal_zones { | |
650 | board_thermal: board_thermal { | |
651 | polling-delay-passive = <1250>; /* milliseconds */ | |
652 | polling-delay = <1500>; /* milliseconds */ | |
653 | ||
654 | /* sensor ID */ | |
655 | thermal-sensors = <&tmp102 0>; | |
656 | ||
657 | board_trips: trips { | |
658 | board_alert0: board_alert { | |
659 | temperature = <40000>; /* millicelsius */ | |
660 | hysteresis = <2000>; /* millicelsius */ | |
661 | type = "active"; | |
662 | }; | |
663 | ||
664 | board_crit: board_crit { | |
665 | temperature = <105000>; /* millicelsius */ | |
666 | hysteresis = <0>; /* millicelsius */ | |
667 | type = "critical"; | |
668 | }; | |
669 | }; | |
670 | ||
671 | board_cooling_maps: cooling-maps { | |
672 | map0 { | |
673 | trip = <&board_alert0>; | |
674 | cooling-device = | |
675 | <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; | |
676 | }; | |
677 | }; | |
678 | }; | |
679 | }; | |
680 | ||
681 | &dss { | |
682 | status = "ok"; | |
683 | ||
684 | vdda_video-supply = <&ldoln_reg>; | |
685 | }; | |
686 | ||
687 | &hdmi { | |
688 | status = "ok"; | |
689 | vdda-supply = <&ldo3_reg>; | |
690 | ||
691 | pinctrl-names = "default"; | |
692 | pinctrl-0 = <&hdmi_pins>; | |
693 | ||
694 | port { | |
695 | hdmi_out: endpoint { | |
696 | remote-endpoint = <&tpd12s015_in>; | |
697 | }; | |
698 | }; | |
699 | }; |