[people/ms/u-boot.git] / board / CarMediaLab / flea3 / flea3.c

/*
 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
 *
 * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
 *
 * Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux-mx35.h>
#include <i2c.h>
#include <linux/types.h>
#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <netdev.h>
#include <fdt_support.h>
#include <mtd_node.h>
#include <jffs2/load_kernel.h>

#ifndef CONFIG_BOARD_EARLY_INIT_F
#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
#endif

#define CCM_CCMR_CONFIG		0x003F4208

#define ESDCTL_DDR2_CONFIG	0x007FFC3F

static inline void dram_wait(unsigned int count)
{
	volatile unsigned int wait = count;

	while (wait--)
		;
}

DECLARE_GLOBAL_DATA_PTR;

int dram_init(void)
{
	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
		PHYS_SDRAM_1_SIZE);

	return 0;
}

static void board_setup_sdram(void)
{
	struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR;

	/* Initialize with default values both CSD0/1 */
	writel(0x2000, &esdc->esdctl0);
	writel(0x2000, &esdc->esdctl1);


	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
			     13, 10, 2, 0x8080);
}

static void setup_iomux_uart3(void)
{
	static const iomux_v3_cfg_t uart3_pads[] = {
		MX35_PAD_RTS2__UART3_RXD_MUX,
		MX35_PAD_CTS2__UART3_TXD_MUX,
	};

	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
}

#define I2C_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE)

static void setup_iomux_i2c(void)
{
	static const iomux_v3_cfg_t i2c_pads[] = {
		NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
		NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),

		NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
		NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
	};

	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
}


static void setup_iomux_spi(void)
{
	static const iomux_v3_cfg_t spi_pads[] = {
		MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
		MX35_PAD_CSPI1_MISO__CSPI1_MISO,
		MX35_PAD_CSPI1_SS0__CSPI1_SS0,
		MX35_PAD_CSPI1_SS1__CSPI1_SS1,
		MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
	};

	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
}

static void setup_iomux_fec(void)
{
	static const iomux_v3_cfg_t fec_pads[] = {
		MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
		MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
		MX35_PAD_FEC_RX_DV__FEC_RX_DV,
		MX35_PAD_FEC_COL__FEC_COL,
		MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
		MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
		MX35_PAD_FEC_TX_EN__FEC_TX_EN,
		MX35_PAD_FEC_MDC__FEC_MDC,
		MX35_PAD_FEC_MDIO__FEC_MDIO,
		MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
		MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
		MX35_PAD_FEC_CRS__FEC_CRS,
		MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
		MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
		MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
		MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
		MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
		MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
		/* GPIO used to power off ethernet */
		MX35_PAD_STXFS4__GPIO2_31,
	};

	/* setup pins for FEC */
	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
}

int board_early_init_f(void)
{
	struct ccm_regs *ccm =
		(struct ccm_regs *)IMX_CCM_BASE;

	/* setup GPIO3_1 to set HighVCore signal */
	imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
	gpio_direction_output(65, 1);

	/* initialize PLL and clock configuration */
	writel(CCM_CCMR_CONFIG, &ccm->ccmr);

	writel(CCM_MPLL_532_HZ, &ccm->mpctl);
	writel(CCM_PPLL_300_HZ, &ccm->ppctl);

	/* Set the core to run at 532 Mhz */
	writel(0x00001000, &ccm->pdr0);

	/* Set-up RAM */
	board_setup_sdram();

	/* enable clocks */
	writel(readl(&ccm->cgr0) |
		MXC_CCM_CGR0_EMI_MASK |
		MXC_CCM_CGR0_EDIO_MASK |
		MXC_CCM_CGR0_EPIT1_MASK,
		&ccm->cgr0);

	writel(readl(&ccm->cgr1) |
		MXC_CCM_CGR1_FEC_MASK |
		MXC_CCM_CGR1_GPIO1_MASK |
		MXC_CCM_CGR1_GPIO2_MASK |
		MXC_CCM_CGR1_GPIO3_MASK |
		MXC_CCM_CGR1_I2C1_MASK |
		MXC_CCM_CGR1_I2C2_MASK |
		MXC_CCM_CGR1_I2C3_MASK,
		&ccm->cgr1);

	/* Set-up NAND */
	__raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);

	/* Set pinmux for the required peripherals */
	setup_iomux_uart3();
	setup_iomux_i2c();
	setup_iomux_fec();
	setup_iomux_spi();

	return 0;
}

int board_init(void)
{
	/* address of boot parameters */
	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;

	/* Enable power for ethernet */
	gpio_direction_output(63, 0);

	udelay(2000);

	return 0;
}

u32 get_board_rev(void)
{
	int rev = 0;

	return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
}

/*
 * called prior to booting kernel or by 'fdt boardsetup' command
 *
 */
int ft_board_setup(void *blob, bd_t *bd)
{
	struct node_info nodes[] = {
		{ "physmap-flash.0", MTD_DEV_TYPE_NOR, },  /* NOR flash */
		{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
	};

	if (getenv("fdt_noauto")) {
		puts("   Skiping ft_board_setup (fdt_noauto defined)\n");
		return 0;
	}

	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));

	return 0;
}
Commit	Line	Data
deb53483 SB	1	/*
	2	* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
	3	*
	4	* (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
	5	*
	6	* Copyright (C) 2011, Stefano Babic <sbabic@denx.de>
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
deb53483 SB	9	*/
	10
	11	#include <common.h>
	12	#include <asm/io.h>
1221ce45	13	#include <linux/errno.h>
deb53483 SB	14	#include <asm/arch/imx-regs.h>
deb53483 SB	15	#include <asm/arch/crm_regs.h>
686e1448	16	#include <asm/arch/iomux-mx35.h>
deb53483 SB	17	#include <i2c.h>
	18	#include <linux/types.h>
	19	#include <asm/gpio.h>
	20	#include <asm/arch/sys_proto.h>
	21	#include <netdev.h>
72c10153 HS	22	#include <fdt_support.h>
	23	#include <mtd_node.h>
	24	#include <jffs2/load_kernel.h>
deb53483 SB	25
	26	#ifndef CONFIG_BOARD_EARLY_INIT_F
	27	#error "CONFIG_BOARD_EARLY_INIT_F must be set for this board"
	28	#endif
	29
	30	#define CCM_CCMR_CONFIG 0x003F4208
	31
	32	#define ESDCTL_DDR2_CONFIG 0x007FFC3F
deb53483 SB	33
	34	static inline void dram_wait(unsigned int count)
	35	{
	36	volatile unsigned int wait = count;
	37
	38	while (wait--)
	39	;
	40	}
	41
	42	DECLARE_GLOBAL_DATA_PTR;
	43
	44	int dram_init(void)
	45	{
	46	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
	47	PHYS_SDRAM_1_SIZE);
	48
	49	return 0;
	50	}
	51
deb53483 SB	52	static void board_setup_sdram(void)
	53	{
	54	struct esdc_regs esdc = (struct esdc_regs )ESDCTL_BASE_ADDR;
	55
	56	/* Initialize with default values both CSD0/1 */
	57	writel(0x2000, &esdc->esdctl0);
	58	writel(0x2000, &esdc->esdctl1);
	59
146fff34 SB	60
	61	mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG,
	62	13, 10, 2, 0x8080);
deb53483 SB	63	}
	64
	65	static void setup_iomux_uart3(void)
	66	{
686e1448 BT	67	static const iomux_v3_cfg_t uart3_pads[] = {
	68	MX35_PAD_RTS2__UART3_RXD_MUX,
	69	MX35_PAD_CTS2__UART3_TXD_MUX,
	70	};
	71
	72	imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
deb53483 SB	73	}
deb53483 SB	74
686e1448 BT	75	#define I2C_PAD_CTRL (PAD_CTL_HYS \| PAD_CTL_PUS_100K_DOWN \| PAD_CTL_ODE)
686e1448 BT	76
deb53483 SB	77	static void setup_iomux_i2c(void)
deb53483 SB	78	{
686e1448 BT	79	static const iomux_v3_cfg_t i2c_pads[] = {
	80	NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL),
	81	NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL),
deb53483	82
686e1448 BT	83	NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL),
	84	NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL),
	85	};
deb53483	86
686e1448	87	imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
deb53483 SB	88	}
	89
	90
	91	static void setup_iomux_spi(void)
	92	{
686e1448 BT	93	static const iomux_v3_cfg_t spi_pads[] = {
	94	MX35_PAD_CSPI1_MOSI__CSPI1_MOSI,
	95	MX35_PAD_CSPI1_MISO__CSPI1_MISO,
	96	MX35_PAD_CSPI1_SS0__CSPI1_SS0,
	97	MX35_PAD_CSPI1_SS1__CSPI1_SS1,
	98	MX35_PAD_CSPI1_SCLK__CSPI1_SCLK,
	99	};
	100
	101	imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads));
deb53483 SB	102	}
	103
	104	static void setup_iomux_fec(void)
	105	{
686e1448 BT	106	static const iomux_v3_cfg_t fec_pads[] = {
	107	MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
	108	MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
	109	MX35_PAD_FEC_RX_DV__FEC_RX_DV,
	110	MX35_PAD_FEC_COL__FEC_COL,
	111	MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
	112	MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
	113	MX35_PAD_FEC_TX_EN__FEC_TX_EN,
	114	MX35_PAD_FEC_MDC__FEC_MDC,
	115	MX35_PAD_FEC_MDIO__FEC_MDIO,
	116	MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
	117	MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
	118	MX35_PAD_FEC_CRS__FEC_CRS,
	119	MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
	120	MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
	121	MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
	122	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
	123	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
	124	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
322ac5f1 SB	125	/* GPIO used to power off ethernet */
322ac5f1 SB	126	MX35_PAD_STXFS4__GPIO2_31,
686e1448	127	};
deb53483	128
686e1448 BT	129	/* setup pins for FEC */
686e1448 BT	130	imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
deb53483 SB	131	}
	132
	133	int board_early_init_f(void)
	134	{
	135	struct ccm_regs *ccm =
	136	(struct ccm_regs *)IMX_CCM_BASE;
	137
	138	/* setup GPIO3_1 to set HighVCore signal */
686e1448	139	imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1);
deb53483 SB	140	gpio_direction_output(65, 1);
	141
	142	/* initialize PLL and clock configuration */
	143	writel(CCM_CCMR_CONFIG, &ccm->ccmr);
	144
	145	writel(CCM_MPLL_532_HZ, &ccm->mpctl);
	146	writel(CCM_PPLL_300_HZ, &ccm->ppctl);
	147
	148	/* Set the core to run at 532 Mhz */
	149	writel(0x00001000, &ccm->pdr0);
	150
	151	/* Set-up RAM */
	152	board_setup_sdram();
	153
	154	/* enable clocks */
	155	writel(readl(&ccm->cgr0) \|
	156	MXC_CCM_CGR0_EMI_MASK \|
34a31bf5	157	MXC_CCM_CGR0_EDIO_MASK \|
deb53483 SB	158	MXC_CCM_CGR0_EPIT1_MASK,
	159	&ccm->cgr0);
	160
	161	writel(readl(&ccm->cgr1) \|
	162	MXC_CCM_CGR1_FEC_MASK \|
	163	MXC_CCM_CGR1_GPIO1_MASK \|
	164	MXC_CCM_CGR1_GPIO2_MASK \|
	165	MXC_CCM_CGR1_GPIO3_MASK \|
	166	MXC_CCM_CGR1_I2C1_MASK \|
	167	MXC_CCM_CGR1_I2C2_MASK \|
	168	MXC_CCM_CGR1_I2C3_MASK,
	169	&ccm->cgr1);
	170
	171	/* Set-up NAND */
	172	__raw_writel(readl(&ccm->rcsr) \| MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr);
	173
	174	/* Set pinmux for the required peripherals */
	175	setup_iomux_uart3();
	176	setup_iomux_i2c();
	177	setup_iomux_fec();
	178	setup_iomux_spi();
	179
	180	return 0;
	181	}
	182
	183	int board_init(void)
	184	{
	185	/* address of boot parameters */
	186	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
	187
322ac5f1 SB	188	/* Enable power for ethernet */
	189	gpio_direction_output(63, 0);
	190
	191	udelay(2000);
	192
deb53483 SB	193	return 0;
	194	}
	195
	196	u32 get_board_rev(void)
	197	{
	198	int rev = 0;
	199
	200	return (get_cpu_rev() & ~(0xF << 8)) \| (rev & 0xF) << 8;
	201	}
72c10153 HS	202
	203	/*
	204	* called prior to booting kernel or by 'fdt boardsetup' command
	205	*
	206	*/
	207	int ft_board_setup(void blob, bd_t bd)
	208	{
	209	struct node_info nodes[] = {
	210	{ "physmap-flash.0", MTD_DEV_TYPE_NOR, }, /* NOR flash */
	211	{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
	212	};
	213
	214	if (getenv("fdt_noauto")) {
	215	puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
	216	return 0;
	217	}
	218
	219	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
	220
	221	return 0;
	222	}