]>
Commit | Line | Data |
---|---|---|
5fb692ca SR |
1 | /* |
2 | * Copyright (C) 2004 PaulReynolds@lhsolutions.com | |
3 | * | |
4 | * (C) Copyright 2007 | |
5 | * Stefan Roese, DENX Software Engineering, sr@denx.de. | |
6 | * | |
7 | * See file CREDITS for list of people who contributed to this | |
8 | * project. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License as | |
12 | * published by the Free Software Foundation; either version 2 of | |
13 | * the License, or (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
23 | * MA 02111-1307 USA | |
24 | */ | |
25 | ||
26 | #include <common.h> | |
27 | #include <asm/processor.h> | |
28 | #include <spd_sdram.h> | |
29 | #include <ppc4xx_enet.h> | |
10efa024 | 30 | #include <netdev.h> |
5fb692ca | 31 | |
6d0f6bcf | 32 | #ifdef CONFIG_SYS_INIT_SHOW_RESET_REG |
5fb692ca SR |
33 | void show_reset_reg(void); |
34 | #endif | |
35 | ||
1218abf1 WD |
36 | DECLARE_GLOBAL_DATA_PTR; |
37 | ||
5fb692ca SR |
38 | int lcd_init(void); |
39 | ||
40 | int board_early_init_f (void) | |
41 | { | |
42 | unsigned long reg; | |
43 | volatile unsigned int *GpioOdr; | |
44 | volatile unsigned int *GpioTcr; | |
45 | volatile unsigned int *GpioOr; | |
46 | ||
47 | /*-------------------------------------------------------------------------+ | |
48 | | Initialize EBC CONFIG | |
49 | +-------------------------------------------------------------------------*/ | |
d1c3b275 | 50 | mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK | |
5fb692ca SR |
51 | EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | |
52 | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | | |
53 | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT | | |
54 | EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); | |
55 | ||
56 | /*-------------------------------------------------------------------------+ | |
57 | | 64MB FLASH. Initialize bank 0 with default values. | |
58 | +-------------------------------------------------------------------------*/ | |
d1c3b275 | 59 | mtebc(PB0AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) | |
5fb692ca SR |
60 | EBC_BXAP_BCE_DISABLE | |
61 | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | | |
62 | EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | | |
63 | EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | | |
64 | EBC_BXAP_BEM_WRITEONLY | | |
65 | EBC_BXAP_PEN_DISABLED); | |
d1c3b275 | 66 | mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | |
5fb692ca SR |
67 | EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT); |
68 | ||
69 | /*-------------------------------------------------------------------------+ | |
70 | | FPGA. Initialize bank 1 with default values. | |
71 | +-------------------------------------------------------------------------*/ | |
d1c3b275 | 72 | mtebc(PB1AP, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) | |
5fb692ca SR |
73 | EBC_BXAP_BCE_DISABLE | |
74 | EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | | |
75 | EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | | |
76 | EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | | |
77 | EBC_BXAP_BEM_WRITEONLY | | |
78 | EBC_BXAP_PEN_DISABLED); | |
d1c3b275 | 79 | mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x41000000) | |
5fb692ca SR |
80 | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); |
81 | ||
82 | /*-------------------------------------------------------------------------+ | |
83 | | LCM. Initialize bank 2 with default values. | |
84 | +-------------------------------------------------------------------------*/ | |
d1c3b275 | 85 | mtebc(PB2AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) | |
5fb692ca SR |
86 | EBC_BXAP_BCE_DISABLE | |
87 | EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | | |
88 | EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | | |
89 | EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | | |
90 | EBC_BXAP_BEM_WRITEONLY | | |
91 | EBC_BXAP_PEN_DISABLED); | |
d1c3b275 | 92 | mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0x42000000) | |
5fb692ca SR |
93 | EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); |
94 | ||
95 | /*-------------------------------------------------------------------------+ | |
96 | | TMP. Initialize bank 3 with default values. | |
97 | +-------------------------------------------------------------------------*/ | |
d1c3b275 | 98 | mtebc(PB3AP, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) | |
5fb692ca SR |
99 | EBC_BXAP_BCE_DISABLE | |
100 | EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | | |
101 | EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | | |
102 | EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | | |
103 | EBC_BXAP_BEM_WRITEONLY | | |
104 | EBC_BXAP_PEN_DISABLED); | |
d1c3b275 | 105 | mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48000000) | |
5fb692ca SR |
106 | EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); |
107 | ||
108 | /*-------------------------------------------------------------------------+ | |
109 | | Connector 4~7. Initialize bank 3~ 7 with default values. | |
110 | +-------------------------------------------------------------------------*/ | |
d1c3b275 SR |
111 | mtebc(PB4AP,0); |
112 | mtebc(PB4CR,0); | |
113 | mtebc(PB5AP,0); | |
114 | mtebc(PB5CR,0); | |
115 | mtebc(PB6AP,0); | |
116 | mtebc(PB6CR,0); | |
117 | mtebc(PB7AP,0); | |
118 | mtebc(PB7CR,0); | |
5fb692ca SR |
119 | |
120 | /*-------------------------------------------------------------------- | |
121 | * Setup the interrupt controller polarities, triggers, etc. | |
122 | *-------------------------------------------------------------------*/ | |
5de85140 SR |
123 | /* |
124 | * Because of the interrupt handling rework to handle 440GX interrupts | |
125 | * with the common code, we needed to change names of the UIC registers. | |
126 | * Here the new relationship: | |
127 | * | |
128 | * U-Boot name 440GX name | |
129 | * ----------------------- | |
130 | * UIC0 UICB0 | |
131 | * UIC1 UIC0 | |
132 | * UIC2 UIC1 | |
133 | * UIC3 UIC2 | |
134 | */ | |
952e7760 SR |
135 | mtdcr (UIC1SR, 0xffffffff); /* clear all */ |
136 | mtdcr (UIC1ER, 0x00000000); /* disable all */ | |
137 | mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */ | |
138 | mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */ | |
139 | mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */ | |
140 | mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ | |
141 | mtdcr (UIC1SR, 0xffffffff); /* clear all */ | |
142 | ||
143 | mtdcr (UIC2SR, 0xffffffff); /* clear all */ | |
144 | mtdcr (UIC2ER, 0x00000000); /* disable all */ | |
145 | mtdcr (UIC2CR, 0x00000000); /* all non-critical */ | |
146 | mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */ | |
147 | mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */ | |
148 | mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ | |
149 | mtdcr (UIC2SR, 0xffffffff); /* clear all */ | |
150 | ||
151 | mtdcr (UIC3SR, 0xffffffff); /* clear all */ | |
152 | mtdcr (UIC3ER, 0x00000000); /* disable all */ | |
153 | mtdcr (UIC3CR, 0x00000000); /* all non-critical */ | |
154 | mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */ | |
155 | mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */ | |
156 | mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ | |
157 | mtdcr (UIC3SR, 0xffffffff); /* clear all */ | |
158 | ||
159 | mtdcr (UIC0SR, 0xfc000000); /* clear all */ | |
160 | mtdcr (UIC0ER, 0x00000000); /* disable all */ | |
161 | mtdcr (UIC0CR, 0x00000000); /* all non-critical */ | |
162 | mtdcr (UIC0PR, 0xfc000000); /* */ | |
163 | mtdcr (UIC0TR, 0x00000000); /* */ | |
164 | mtdcr (UIC0VR, 0x00000001); /* */ | |
5fb692ca SR |
165 | |
166 | /* Enable two GPIO 10~11 and TraceA signal */ | |
d1c3b275 | 167 | mfsdr(SDR0_PFC0,reg); |
5fb692ca | 168 | reg |= 0x00300000; |
d1c3b275 | 169 | mtsdr(SDR0_PFC0,reg); |
5fb692ca | 170 | |
d1c3b275 | 171 | mfsdr(SDR0_PFC1,reg); |
5fb692ca | 172 | reg |= 0x00100000; |
d1c3b275 | 173 | mtsdr(SDR0_PFC1,reg); |
5fb692ca SR |
174 | |
175 | /* Set GPIO 10 and 11 as output */ | |
6d0f6bcf JCPV |
176 | GpioOdr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x718); |
177 | GpioTcr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x704); | |
178 | GpioOr = (volatile unsigned int*)(CONFIG_SYS_PERIPHERAL_BASE+0x700); | |
5fb692ca SR |
179 | |
180 | *GpioOdr &= ~(0x00300000); | |
181 | *GpioTcr |= 0x00300000; | |
a4012396 | 182 | *GpioOr |= 0x00300000; |
5fb692ca SR |
183 | |
184 | return 0; | |
185 | } | |
186 | ||
187 | int misc_init_r(void) | |
188 | { | |
189 | lcd_init(); | |
190 | ||
191 | return 0; | |
192 | } | |
193 | ||
194 | int checkboard (void) | |
195 | { | |
196 | char *s = getenv ("serial#"); | |
197 | ||
198 | printf ("Board: Taishan - AMCC PPC440GX Evaluation Board"); | |
199 | if (s != NULL) { | |
200 | puts (", serial# "); | |
201 | puts (s); | |
202 | } | |
203 | putc ('\n'); | |
204 | ||
6d0f6bcf | 205 | #ifdef CONFIG_SYS_INIT_SHOW_RESET_REG |
5fb692ca SR |
206 | show_reset_reg(); |
207 | #endif | |
208 | ||
209 | return (0); | |
210 | } | |
211 | ||
5fb692ca SR |
212 | /************************************************************************* |
213 | * pci_pre_init | |
214 | * | |
215 | * This routine is called just prior to registering the hose and gives | |
216 | * the board the opportunity to check things. Returning a value of zero | |
217 | * indicates that things are bad & PCI initialization should be aborted. | |
218 | * | |
219 | * Different boards may wish to customize the pci controller structure | |
220 | * (add regions, override default access routines, etc) or perform | |
221 | * certain pre-initialization actions. | |
222 | * | |
223 | ************************************************************************/ | |
466fff1a | 224 | #if defined(CONFIG_PCI) |
5fb692ca SR |
225 | int pci_pre_init(struct pci_controller * hose ) |
226 | { | |
227 | unsigned long strap; | |
228 | ||
229 | /*--------------------------------------------------------------------------+ | |
230 | * The ocotea board is always configured as the host & requires the | |
231 | * PCI arbiter to be enabled. | |
232 | *--------------------------------------------------------------------------*/ | |
d1c3b275 | 233 | mfsdr(SDR0_SDSTP1, strap); |
5fb692ca SR |
234 | if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ |
235 | printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); | |
236 | return 0; | |
237 | } | |
238 | ||
239 | return 1; | |
240 | } | |
466fff1a | 241 | #endif /* defined(CONFIG_PCI) */ |
5fb692ca SR |
242 | |
243 | /************************************************************************* | |
244 | * pci_target_init | |
245 | * | |
246 | * The bootstrap configuration provides default settings for the pci | |
247 | * inbound map (PIM). But the bootstrap config choices are limited and | |
248 | * may not be sufficient for a given board. | |
249 | * | |
250 | ************************************************************************/ | |
6d0f6bcf | 251 | #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) |
5fb692ca SR |
252 | void pci_target_init(struct pci_controller * hose ) |
253 | { | |
5fb692ca SR |
254 | /*--------------------------------------------------------------------------+ |
255 | * Disable everything | |
256 | *--------------------------------------------------------------------------*/ | |
ddc922ff NG |
257 | out32r( PCIL0_PIM0SA, 0 ); /* disable */ |
258 | out32r( PCIL0_PIM1SA, 0 ); /* disable */ | |
259 | out32r( PCIL0_PIM2SA, 0 ); /* disable */ | |
260 | out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ | |
5fb692ca SR |
261 | |
262 | /*--------------------------------------------------------------------------+ | |
263 | * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping | |
264 | * options to not support sizes such as 128/256 MB. | |
265 | *--------------------------------------------------------------------------*/ | |
ddc922ff NG |
266 | out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); |
267 | out32r( PCIL0_PIM0LAH, 0 ); | |
268 | out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); | |
5fb692ca | 269 | |
ddc922ff | 270 | out32r( PCIL0_BAR0, 0 ); |
5fb692ca SR |
271 | |
272 | /*--------------------------------------------------------------------------+ | |
273 | * Program the board's subsystem id/vendor id | |
274 | *--------------------------------------------------------------------------*/ | |
ddc922ff NG |
275 | out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); |
276 | out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); | |
5fb692ca | 277 | |
ddc922ff | 278 | out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); |
5fb692ca | 279 | } |
6d0f6bcf | 280 | #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ |
5fb692ca | 281 | |
5fb692ca SR |
282 | #ifdef CONFIG_POST |
283 | /* | |
284 | * Returns 1 if keys pressed to start the power-on long-running tests | |
285 | * Called from board_init_f(). | |
286 | */ | |
287 | int post_hotkeys_pressed(void) | |
288 | { | |
289 | return (ctrlc()); | |
290 | } | |
291 | #endif | |
10efa024 BW |
292 | |
293 | int board_eth_init(bd_t *bis) | |
294 | { | |
cef0efaf | 295 | cpu_eth_init(bis); |
10efa024 BW |
296 | return pci_eth_init(bis); |
297 | } |