]>
Commit | Line | Data |
---|---|---|
421102e7 AF |
1 | ############################################################################### |
2 | # | |
3 | # Raspberry Pi - Videocore configuration file | |
4 | # | |
5 | ############################################################################### | |
ee3da7ef | 6 | enable_uart=1 |
421102e7 | 7 | |
06f3145f AF |
8 | ############################################################################### |
9 | # | |
10 | # GPU Memory Settings (16,32,64 ... ) | |
06f3145f | 11 | ############################################################################### |
feb50ba8 AF |
12 | gpu_mem=16 |
13 | ||
14 | ############################################################################### | |
15 | # | |
16 | # hdmi/video options | |
17 | # | |
18 | ############################################################################### | |
19 | # | |
20 | # Set this if monitor was not detected at reboot. | |
21 | #hdmi_force_hotplug=1 | |
22 | # | |
23 | # hdmi_drive: 0 auto, 1 DVI (no Sound), 2 HDMI (Sound) | |
24 | #hdmi_drive=1 | |
ee3da7ef | 25 | hdmi_safe=1 |
feb50ba8 AF |
26 | # |
27 | # sdtv_mode: 0 NTSC, 1 NTSC (JP), 3 PAL, 4 PAL (Brazil) | |
28 | #sdtv_mode=2 | |
29 | # sdtv_ascpect: 0 4:3, 1 14:9, 2 16:9 | |
30 | #sdtv_aspect=0 | |
31 | # | |
32 | # overscan | |
33 | #overscan_left=16 | |
34 | #overscan_right=16 | |
35 | #overscan_top=16 | |
36 | #overscan_bottom=16 | |
37 | # | |
06f3145f | 38 | |
421102e7 AF |
39 | ############################################################################### |
40 | # | |
41 | # Turbo Mode (cpufreq) Settings ... | |
42 | # default clocks are arm=700, core=250 and sdram=400 | |
43 | # | |
44 | ############################################################################### | |
45 | # | |
46 | # underclock at idle | |
c75cc1f6 AF |
47 | #arm_freq_min=500 |
48 | #sdram_freq_min=250 | |
421102e7 AF |
49 | # |
50 | # use following paramters to overclock at load | |
feb50ba8 | 51 | #arm_freq=900 |
421102e7 AF |
52 | #core_freq=450 |
53 | #sdram_freq=450 | |
feb50ba8 | 54 | # higher clock than 900Mhz most need over voltage. Use with care. |
e69cbcfc | 55 | #over_voltage=3 |
421102e7 | 56 | |
db4000f9 AF |
57 | ############################################################################## |
58 | # | |
59 | # u-boot selection for different rpi boards | |
60 | # | |
61 | ############################################################################## | |
62 | [pi1] | |
63 | kernel=u-boot-rpi1.bin | |
64 | [pi2] | |
65 | kernel=u-boot-rpi2.bin | |
66 | [pi3] | |
67 | kernel=u-boot-rpi3.bin | |
68 | [pi4] | |
69 | kernel=u-boot-rpi4.bin | |
70 | [all] | |
71 | ############################################################################## |