projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 983fda83 WD |
1 | Freescale Alaska MPC8220 board |
| 2 | ============================== | |
| 3 | ||
| 4 | TsiChung Liew(Tsi-Chung.Liew@freescale.com) | |
| 5 | Created 9/21/04 | |
| 6 | =========================================== | |
| 7 | ||
| 8 | ||
| 9 | Changed files: | |
| 10 | ============== | |
| 11 | ||
| 12 | - Makefile added MPC8220 and Alaska8220_config | |
| 13 | - MAKEALL added MPC8220 and Alaska8220 | |
| 14 | - README added CONFIG_MPC8220, Alaska8220_config | |
| 15 | ||
| 16 | - common/cmd_bdinfo.c added board information members for MPC8220 | |
| 17 | - common/cmd_bootm.c added clocks for MPC8220 in do_bootm_linux() | |
| 18 | ||
| 19 | - include/common.h added CONFIG_MPC8220 | |
| 20 | ||
| 21 | - include/asm-ppc/u-boot.h added board information members for MPC8220 | |
| 22 | - include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk, | |
| 23 | vco_clk, pev_clk, flb_clk, and bExtUart | |
| 24 | ||
| 25 | - lib_ppc/board.c added CONFIG_MPC8220 support | |
| 26 | ||
| 27 | - net/eth.c added FEC support for MPC8220 | |
| 28 | ||
| 29 | Added files: | |
| 30 | ============ | |
| 31 | - board/alaska directory for Alaska MPC8220 | |
| 32 | - board/alaska/alaska.c Alaska dram and BATs setup | |
| 33 | - board/alaska/extserial.c external serial (debug card serial) support | |
| 34 | - board/alaska/flash.c Socket (AMD) and Onboard (INTEL) flash support | |
| 35 | - board/alaska/serial.c to determine which int/ext serial to use | |
| 36 | - board/alaska/Makefile Makefile | |
| 37 | - board/alaska/config.mk config make | |
| 38 | - board/alaska/u-boot.lds Linker description | |
| 39 | ||
| 40 | - cpu/mpc8220/dma.h multi-channel dma header file | |
| 41 | - cpu/mpc8220/dramSetup.h dram setup header file | |
| 42 | - cpu/mpc8220/fec.h MPC8220 FEC header file | |
| 43 | - cpu/mpc8220/cpu.c cpu specific code | |
| 44 | - cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup | |
| 45 | - cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup | |
| 46 | - cpu/mpc8220/fec.c MPC8220 FEC driver | |
| 47 | - cpu/mpc8220/i2c.c MPC8220 I2C driver | |
| 48 | - cpu/mpc8220/interrupts.c interrupt support (not enable) | |
| 49 | - cpu/mpc8220/loadtask.c load dma | |
| 50 | - cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock | |
| 51 | - cpu/mpc8220/traps.c exception | |
| 52 | - cpu/mpc8220/uart.c MPC8220 UART driver | |
| 53 | - cpu/mpc8220/Makefile Makefile | |
| 54 | - cpu/mpc8220/config.mk config make | |
| 55 | - cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program | |
| 56 | - cpu/mpc8220/io.S io functions | |
| 57 | - cpu/mpc8220/start.S start up | |
| 58 | ||
| 59 | - include/mpc8220.h | |
| 60 | ||
| 61 | - include/asm-ppc/immap_8220.h | |
| 62 | ||
| 63 | - include/configs/Alaska8220.h | |
| 64 | ||
| 65 | ||
| 66 | 1. SWITCH SETTINGS | |
| 67 | ================== | |
| 68 | 1.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL) | |
| 69 | SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART | |
| 70 | SW3: unsed | |
| 71 | SW4: 0 - 1284 or 1 - FEC1 | |
| 72 | SW5: 0 - PEV or 1 - FEC2 | |
| 73 | ||
| 74 | ||
| 75 | 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL | |
| 76 | =========================================== | |
| 77 | 2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and | |
| 78 | linux kernel, you can customize it based on your system requirements: | |
| 79 | DDR: 0x00000000-0x1fffffff (max 512MB) | |
| 80 | MBAR: 0xf0000000-0xf0027fff (128KB) | |
| 81 | CPLD: 0xf1000000-0xf103ffff (256KB) | |
| 82 | FPGA: 0xf2000000-0xf203ffff (256KB) | |
| 83 | Flash: 0xfe000000-0xffffffff (max 32MB) | |
| 84 | ||
| 85 | 3. DEFINITIONS AND COMPILATION | |
| 86 | ============================== | |
| 87 | 3.1 Explanation on NEW definitions in include/configs/alaska8220.h | |
| 88 | CONFIG_MPC8220 MPC8220 specific | |
| 89 | CONFIG_ALASKA8220 Alaska board specific | |
| 6d0f6bcf | 90 | CONFIG_SYS_MPC8220_CLKIN Define Alaska Input Clock |
| 983fda83 WD |
91 | CONFIG_PSC_CONSOLE Enable MPC8220 UART |
| 92 | CONFIG_EXTUART_CONSOLE Enable External 16552 UART | |
| 6d0f6bcf JCPV |
93 | CONFIG_SYS_AMD_BOOT To determine the u-boot is booted from AMD or Intel |
| 94 | CONFIG_SYS_MBAR MBAR base address | |
| 95 | CONFIG_SYS_DEFAULT_MBAR Reset MBAR base address | |
| 983fda83 WD |
96 | |
| 97 | 3.2 Compilation | |
| 98 | export CROSS_COMPILE=cross-compile-prefix | |
| 99 | cd u-boot-1-1-x | |
| 100 | make distclean | |
| 101 | make Alaska8220_config | |
| 102 | make | |
| 103 | ||
| 104 | ||
| 105 | 4. SCREEN DUMP | |
| 106 | ============== | |
| 107 | 4.1 Alaska MPC8220 board | |
| 108 | Boot from AMD (NOTE: May not show exactly the same) | |
| 109 | ||
| 110 | U-Boot 1.1.1 (Sep 22 2004 - 22:14:41) | |
| 111 | ||
| 112 | CPU: MPC8220 (JTAG ID 1640301d) at 300 MHz | |
| 113 | Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz | |
| 114 | Board: Alaska MPC8220 Evaluation Board | |
| 115 | I2C: 93 kHz, ready | |
| 116 | DRAM: 256 MB | |
| 117 | Reserving 167k for U-Boot at: 0ffd6000 | |
| 118 | FLASH: 16.5 MB | |
| 119 | *** Warning - bad CRC, using default environment | |
| 120 | ||
| 121 | In: serial | |
| 122 | Out: serial | |
| 123 | Err: serial | |
| 124 | Net: FEC ETHERNET | |
| 125 | => flinfo | |
| 126 | ||
| 127 | Bank # 1: INTEL 28F128J3A | |
| 128 | Size: 8 MB in 64 Sectors | |
| 129 | Sector Start Addresses: | |
| 130 | FE000000 FE020000 FE040000 FE060000 FE080000 | |
| 131 | FE0A0000 FE0C0000 FE0E0000 FE100000 FE120000 | |
| 132 | FE140000 FE160000 FE180000 FE1A0000 FE1C0000 | |
| 133 | FE1E0000 FE200000 FE220000 FE240000 FE260000 | |
| 134 | FE280000 FE2A0000 FE2C0000 FE2E0000 FE300000 | |
| 135 | FE320000 FE340000 FE360000 FE380000 FE3A0000 | |
| 136 | FE3C0000 FE3E0000 FE400000 FE420000 FE440000 | |
| 137 | FE460000 FE480000 FE4A0000 FE4C0000 FE4E0000 | |
| 138 | FE500000 FE520000 FE540000 FE560000 FE580000 | |
| 139 | FE5A0000 FE5C0000 FE5E0000 FE600000 FE620000 | |
| 140 | FE640000 FE660000 FE680000 FE6A0000 FE6C0000 | |
| 141 | FE6E0000 FE700000 FE720000 FE740000 FE760000 | |
| 142 | FE780000 FE7A0000 FE7C0000 FE7E0000 | |
| 143 | ||
| 144 | Bank # 2: INTEL 28F128J3A | |
| 145 | Size: 8 MB in 64 Sectors | |
| 146 | Sector Start Addresses: | |
| 147 | FE800000 FE820000 FE840000 FE860000 FE880000 | |
| 148 | FE8A0000 FE8C0000 FE8E0000 FE900000 FE920000 | |
| 149 | FE940000 FE960000 FE980000 FE9A0000 FE9C0000 | |
| 150 | FE9E0000 FEA00000 FEA20000 FEA40000 FEA60000 | |
| 151 | FEA80000 FEAA0000 FEAC0000 FEAE0000 FEB00000 | |
| 152 | FEB20000 FEB40000 FEB60000 FEB80000 FEBA0000 | |
| 153 | FEBC0000 FEBE0000 FEC00000 FEC20000 FEC40000 | |
| 154 | FEC60000 FEC80000 FECA0000 FECC0000 FECE0000 | |
| 155 | FED00000 FED20000 FED40000 FED60000 FED80000 | |
| 156 | FEDA0000 FEDC0000 FEDE0000 FEE00000 FEE20000 | |
| 157 | FEE40000 FEE60000 FEE80000 FEEA0000 FEEC0000 | |
| 158 | FEEE0000 FEF00000 (RO) FEF20000 (RO) FEF40000 FEF60000 | |
| 159 | FEF80000 FEFA0000 FEFC0000 FEFE0000 (RO) | |
| 160 | ||
| 161 | Bank # 3: AMD AMD29F040B | |
| 162 | Size: 0 MB in 7 Sectors | |
| 163 | Sector Start Addresses: | |
| 164 | FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000 FFF40000 | |
| 165 | FFF50000 FFF60000 | |
| 166 | ||
| 167 | Bank # 4: AMD AMD29F040B | |
| 168 | Size: 0 MB in 1 Sectors | |
| 169 | Sector Start Addresses: | |
| 170 | FFF70000 (RO) | |
| 171 | => bdinfo | |
| 172 | ||
| 173 | memstart = 0xF0009800 | |
| 174 | memsize = 0x10000000 | |
| 175 | flashstart = 0xFFF00000 | |
| 176 | flashsize = 0x01080000 | |
| 177 | flashoffset = 0x00025000 | |
| 178 | sramstart = 0xF0020000 | |
| 179 | sramsize = 0x00008000 | |
| 180 | bootflags = 0x00000001 | |
| 181 | intfreq = 300 MHz | |
| 182 | busfreq = 120 MHz | |
| 183 | inpfreq = 30 MHz | |
| 184 | flbfreq = 30 MHz | |
| 185 | pcifreq = 30 MHz | |
| 186 | vcofreq = 480 MHz | |
| 187 | pevfreq = 81 MHz | |
| 188 | ethaddr = 00:E0:0C:BC:E0:60 | |
| 189 | eth1addr = 00:E0:0C:BC:E0:61 | |
| 190 | IP addr = 192.162.1.2 | |
| 191 | baudrate = 115200 bps | |
| 192 | => printenv | |
| 193 | bootargs=root=/dev/ram rw | |
| 194 | bootdelay=5 | |
| 195 | baudrate=115200 | |
| 196 | ethaddr=00:e0:0c:bc:e0:60 | |
| 197 | eth1addr=00:e0:0c:bc:e0:61 | |
| 198 | ipaddr=192.162.1.2 | |
| 199 | serverip=192.162.1.1 | |
| 200 | gatewayip=192.162.1.1 | |
| 201 | netmask=255.255.255.0 | |
| 202 | hostname=Alaska | |
| 203 | stdin=serial | |
| 204 | stdout=serial | |
| 205 | stderr=serial | |
| 206 | ethact=FEC ETHERNET | |
| 207 | ||
| 208 | Environment size: 268/65532 bytes | |
| 209 | => setenv ipaddr 192.160.1.2 | |
| 210 | => setenv serverip 192.160.1.1 | |
| 211 | => setenv gatewayip 192.160.1.1 | |
| 212 | => saveenv | |
| 213 | Saving Environment to Flash... | |
| 214 | ||
| 215 | . | |
| 216 | Un-Protected 1 sectors | |
| 217 | Erasing Flash... | |
| 218 | Erasing sector 0 ... done | |
| 219 | Erased 1 sectors | |
| 220 | Writing to Flash... done | |
| 221 | ||
| 222 | . | |
| 223 | Protected 1 sectors | |
| 224 | => tftp 0x10000 linux.elf | |
| 225 | Using FEC ETHERNET device | |
| 226 | TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1 | |
| 227 | Filename 'linux.elf'. | |
| 228 | Load address: 0x10000 | |
| 229 | Loading: invalid RARP header | |
| 230 | ################################################################# | |
| 231 | ################################################################# | |
| 232 | ################################################################# | |
| 233 | ################################################################# | |
| 234 | ################################################################# | |
| 235 | ################################################################# | |
| 236 | ################################################################# | |
| 237 | ################################################################# | |
| 238 | ################################################## | |
| 239 | done | |
| 240 | Bytes transferred = 2917494 (2c8476 hex) | |
| 241 | => bootelf | |
| 242 | Loading .text @ 0x00a00000 (23820 bytes) | |
| 243 | Loading .data @ 0x00a06000 (2752512 bytes) | |
| 244 | Clearing .bss @ 0x00ca6000 (12764 bytes) | |
| 245 | ## Starting application at 0x00a00000 ... | |
| 246 | ||
| 247 | Collect some entropy from RAM........done | |
| 248 | loaded at: 00A00000 00CA91DC | |
| 249 | zimage at: 00A06A93 00AD7756 | |
| 250 | initrd at: 00AD8000 00CA5565 | |
| 251 | avail ram: 00CAA000 014AA000 | |
| 252 | ||
| 253 | Linux/PPC load: ip=off console=ttyS0,115200 | |
| 254 | Uncompressing Linux...done. | |
| 255 | Now booting the kernel | |
| 256 | Total memory in system: 256 MB | |
| 257 | Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb | |
| 258 | Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004 | |
| 259 | Motorola Alaska port (C) 2003 Motorola, Inc. | |
| 260 | CPLD rev 3 | |
| 261 | CPLD switches 0x1b | |
| 262 | Set Pin Mux for FEC1 | |
| 263 | Set Pin Mux for FEC2 | |
| 264 | Alaska Pin Multiplexing: | |
| 265 | Port Configuration Register 0 = 0 | |
| 266 | Port Configuration Register 1 = 0 | |
| 267 | Port Configuration Register 2 = 0 | |
| 268 | Port Configuration Register 3 = 50000000 | |
| 269 | Port Configuration Register 3 - PCI = 51400180 | |
| 270 | Setup Alaska FPGA PIC: | |
| 271 | Interrupt Enable Register *(u32) = 0 | |
| 272 | Interrupt Status Register = 2f0000 | |
| 273 | Interrupt Enable Register in_be32 = 0 | |
| 274 | Interrupt Status Register = 2f0000 | |
| 275 | Interrupt Enable Register in_le32 = 0 | |
| 276 | Interrupt Status Register = 2f00 | |
| 277 | Interrupt Enable Register readl = 0 | |
| 278 | Interrupt Status Register = 2f00 | |
| 279 | Interrupt Enable Register = 0 | |
| 280 | Interrupt Status Register = 2f0000 | |
| 281 | Setup Alaska PCI Controller: | |
| 282 | On node 0 totalpages: 65536 | |
| 283 | zone(0): 65536 pages. | |
| 284 | zone(1): 0 pages. | |
| 285 | zone(2): 0 pages. | |
| 286 | Kernel command line: ip=off console=ttyS0,115200 | |
| 287 | Using XLB clock (120.00 MHz) to set up decrementer | |
| 288 | Calibrating delay loop... 199.88 BogoMIPS | |
| 289 | Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem) | |
| 290 | Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) | |
| 291 | Inode cache hash table entries: 16384 (order: 5, 131072 bytes) | |
| 292 | Mount cache hash table entries: 512 (order: 0, 4096 bytes) | |
| 293 | Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| 294 | Page-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| 295 | POSIX conformance testing by UNIFIX | |
| 296 | PCI: Probing PCI hardware | |
| 297 | PCI: (pcibios_init) Global-Hose = 0xc029d000 | |
| 298 | Scanning bus 00 | |
| 299 | Fixups for bus 00 | |
| 300 | Bus scan for 00 returning with max=00 | |
| 301 | PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000) | |
| 302 | PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1 | |
| 303 | PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing! | |
| 304 | PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88 | |
| 305 | PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4 | |
| 306 | PCI: (pcibios_init) finished allocating and assigning resources! | |
| 307 | initDma! | |
| 308 | Using 90 DMA buffer descriptors | |
| 309 | descUsed f0023600, descriptors f002360c freeSram f0024140 | |
| 310 | unmask SDMA tasks: 0xf0008018 = 0x6f000000 | |
| 311 | Linux NET4.0 for Linux 2.4 | |
| 312 | Based upon Swansea University Computer Society NET3.039 | |
| 313 | Initializing RT netlink socket | |
| 314 | Starting kswapd | |
| 315 | Journalled Block Device driver loaded | |
| 316 | JFFS version 1.0, (C) 1999, 2000 Axis Communications AB | |
| 317 | JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. | |
| 318 | pty: 256 Unix98 ptys configured | |
| 319 | tracek: Copyright (C) Motorola, 2003. | |
| 320 | Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled | |
| 321 | ttyS00 at 0xf1001008 (irq = 73) is a ST16650 | |
| 322 | ttyS01 at 0xf1001010 (irq = 74) is a ST16650 | |
| 323 | elp-fpanel: Copyright (C) Motorola, 2003. | |
| 324 | fpanel: fpanelWait timeout | |
| 325 | elp-engine: Copyright (C) Motorola, 2003. | |
| 326 | Video disabled due to configuration switch 4 | |
| 327 | Alpine 1284 driver: Copyright (C) Motorola, 2003. | |
| 328 | 1284 disabled due to configuration switch 5 | |
| 329 | Alpine USB driver: Copyright (C) Motorola, 2003. | |
| 330 | OK | |
| 331 | USB: Descriptor download completed OK | |
| 332 | enable_irq(41) unbalanced | |
| 333 | enable_irq(75) unbalanced | |
| 334 | elp-dmaram: Copyright (C) Motorola, 2003. | |
| 335 | Total memory in system: 256 MB | |
| 336 | elp_dmaram: offset is 0x10000000, size is 0 | |
| 337 | Xicor NVRAM driver: Copyright (C) Motorola, 2003. | |
| 338 | elp-video: Copyright (C) Motorola, 2003. | |
| 339 | Video disabled due to configuration switch 4 | |
| 340 | elp-pfm: Copyright (C) Motorola, 2003. | |
| 341 | paddle: Copyright (C) Motorola, 2001, present. | |
| 342 | RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize | |
| 343 | loop: loaded (max 8 devices) | |
| 344 | PPP generic driver version 2.4.2 | |
| 345 | PPP Deflate Compression module registered | |
| 346 | Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 | |
| 347 | ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx | |
| 348 | init_alaska_mtd: chip probing count 0 | |
| 349 | cfi_cmdset_0001: Erase suspend on write enabled | |
| 350 | Using buffer write method | |
| 351 | init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes | |
| 352 | ALASKA flash0: Using Static image partition definition | |
| 353 | Creating 3 MTD partitions on "ALASKA0": | |
| 354 | 0x00000000-0x00280000 : "kernel" | |
| 355 | 0x00280000-0x00fe0000 : "user" | |
| 356 | 0x00fe0000-0x01000000 : "signature" | |
| 357 | mgt_fec_module_init | |
| 358 | mgt_fec_init() | |
| 359 | mgt_fec_init | |
| 360 | mgt_init_fec_dev(0xc05f6000,0) | |
| 361 | dev c05f6000 fec_priv c05f6160 fec f0009000 | |
| 362 | mgt_init_fec_dev(0xc05f6800,1) | |
| 363 | dev c05f6800 fec_priv c05f6960 fec f0009800 | |
| 364 | NET4: Linux TCP/IP 1.0 for NET4.0 | |
| 365 | IP Protocols: ICMP, UDP, TCP, IGMP | |
| 366 | IP: routing cache hash table of 2048 buckets, 16Kbytes | |
| 367 | TCP: Hash tables configured (established 16384 bind 32768) | |
| 368 | NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. | |
| 369 | RAMDISK: Compressed image found at block 0 | |
| 370 | Freeing initrd memory: 1845k freed | |
| 371 | JFFS: Trying to mount a non-mtd device. | |
| 372 | VFS: Mounted root (romfs filesystem) readonly. | |
| 373 | Freeing unused kernel memory: 228k init | |
| 374 | INIT: version 2.78 booting | |
| 375 | INIT: Entering runlevel: 1 | |
| 376 | "Space, a great big place of unknown stuff." -Dexter, for our MotD. | |
| 377 | [01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3 | |
| 378 | [01/Jan/1970:00:00:01 +0000] boa: server built Sep 7 2004 at 17:40:55. | |
| 379 | [01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80 | |
| 380 | Mounting flash filesystem, will take a minute... | |
| 381 | /etc/rc: line 30: /dev/lp0: No such devish-2.05b# | |
| 382 | sh-2.05b# ifup eth0 | |
| 383 | client (v0.9.9-pre) started | |
| 384 | adapter index 2 | |
| 385 | adapter hardware address 00:e0:0c:bc:e0:60 | |
| 386 | execle'ing /usr/share/udhcpc/default.script | |
| 387 | /sbin/ifconfig eth0 | |
| 388 | eth0 Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:60 | |
| 389 | BROADCAST MULTICAST MTU:1500 Metric:1 | |
| 390 | mgt_fec_open | |
| 391 | Rfec request irq | |
| 392 | X fec_open: rcv_ring_size 8, xmt_ring_size 8 | |
| 393 | packmgt_fec_open(): call netif_start_queue() | |
| 394 | ets:0 errors:0 dropped:0 overruns:0 frame:0 | |
| 395 | TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 | |
| 396 | collisions:0 txqueuelen:100 | |
| 397 | RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) | |
| 398 | Base address:0x9000 | |
| 399 | ||
| 400 | /sbin/ifconfig eth0 up | |
| 401 | entering raw listen mode | |
| 402 | Opening raw socket on ifindex 2 | |
| 403 | adding option 0x35 | |
| 404 | adding option 0x3d | |
| 405 | adding option 0x3c | |
| 406 | Sending discover... | |
| 407 | Waiting on select... | |
| 408 | unrelated/bogus packet | |
| 409 | Waiting on select... | |
| 410 | oooooh!!! got some! | |
| 411 | adding option 0x35 | |
| 412 | adding option 0x3d | |
| 413 | adding option 0x3c | |
| 414 | adding option 0x32 | |
| 415 | adding option 0x36 | |
| 416 | Sending select for 163.12.48.146... | |
| 417 | Waiting on select... | |
| 418 | oooooh!!! got some! | |
| 419 | Waiting on select... | |
| 420 | oooooh!!! got some! | |
| 421 | Lease of 163.12.48.146 obtained, lease time 345600 | |
| 422 | execle'ing /usr/share/udhcpc/default.script | |
| 423 | /sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0 | |
| 424 | /sbin/ifconfig eth0 up | |
| 425 | deleting routers | |
| 426 | /sbin/route del default | |
| 427 | /sbin/route add default gw 163.12.49.254 dev eth0 | |
| 428 | adding dns 163.12.252.230 | |
| 429 | adding dns 192.55.22.4 | |
| 430 | adding dns 192.5.249.4 | |
| 431 | entering none listen mode | |
| 432 | sh-2.05b# | |
| 433 | ||
| 434 | 5. REPROGRAM U-BOOT | |
| 435 | =================== | |
| 436 | 5.1 Reprogram u-boot (boot from AMD) | |
| 437 | 1. Unprotect the boot sector | |
| 438 | => protect off bank 3 | |
| 439 | 2. Download new u-boot binary file | |
| 440 | => tftp 0x10000 u-boot.bin | |
| 441 | 3. Erase bootsector (max 7 sectors) | |
| 442 | => erase 0xfff00000 0xfff6ffff | |
| 443 | 4. Program the u-boot to flash | |
| 444 | => cp.b 0x10000 0xfff00000 | |
| 445 | 5. Reset for the new u-boot to take place | |
| 446 | => reset | |
| 447 | ||
| 448 | 5.2 Reprogram u-boot (boot from AMD program at INTEL) | |
| 449 | 1. Unprotect the boot sector | |
| 450 | => protect off bank 2 | |
| 451 | 2. Download new u-boot binary file | |
| 452 | => tftp 0x10000 u-boot.bin | |
| 453 | 3. Erase bootsector (max 7 sectors) | |
| 454 | => erase 0xfef00000 0xfefdffff | |
| 455 | 4. Program the u-boot to flash | |
| 456 | => cp.b 0x10000 0xfef00000 | |
| 457 | 5. Reset for the new u-boot to take place | |
| 458 | => reset | |
| 459 | ||
| 460 | 5.3 Reprogram u-boot (boot from INTEL) | |
| 461 | 1. Unprotect the boot sector | |
| 462 | => protect off bank 4 | |
| 463 | 2. Download new u-boot binary file | |
| 464 | => tftp 0x10000 u-boot.bin | |
| 465 | 3. Erase bootsector (max 7 sectors) | |
| 466 | => erase 0xfff00000 0xfffdffff | |
| 467 | 4. Program the u-boot to flash | |
| 468 | => cp.b 0x10000 0xfff00000 | |
| 469 | 5. Reset for the new u-boot to take place | |
| 470 | => reset | |
| 471 | ||
| 472 | 5.4 Reprogram u-boot (boot from INTEL program at AMD) | |
| 473 | 1. Unprotect the boot sector | |
| 474 | => protect off bank 1 | |
| 475 | 2. Download new u-boot binary file | |
| 476 | => tftp 0x10000 u-boot.bin | |
| 477 | 3. Erase bootsector (max 7 sectors) | |
| 478 | => erase 0xfe080000 0xfe0effff | |
| 479 | 4. Program the u-boot to flash | |
| 480 | => cp.b 0x10000 0xfe080000 | |
| 481 | 5. Reset for the new u-boot to take place | |
| 482 | => reset |