[people/ms/u-boot.git] / drivers / mmc / Kconfig

menu "MMC Host controller Support"

config MMC
	bool "MMC/SD/SDIO card support"
	default ARM || PPC || SANDBOX
	help
	  This selects MultiMediaCard, Secure Digital and Secure
	  Digital I/O support.

	  If you want MMC/SD/SDIO support, you should say Y here and
	  also to your specific host controller driver.

config GENERIC_MMC
	bool "Generic MMC driver framework"
	default MMC

config DM_MMC
	bool "Enable MMC controllers using Driver Model"
	depends on DM
	help
	  This enables the MultiMediaCard (MMC) uclass which supports MMC and
	  Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
	  and non-removable (e.g. eMMC chip) devices are supported. These
	  appear as block devices in U-Boot and can support filesystems such
	  as EXT4 and FAT.

config DM_MMC_OPS
	bool "Support MMC controller operations using Driver Model"
	depends on DM_MMC
	default y if DM_MMC
	help
	  Driver model provides a means of supporting device operations. This
	  option moves MMC operations under the control of driver model. The
	  option will be removed as soon as all DM_MMC drivers use it, as it
	  will the only supported behaviour.

if MMC

config SPL_MMC_TINY
	bool "Tiny MMC framework in SPL"
	help
	  Enable MMC framework tinification support. This option is useful if
	  if your SPL is extremely size constrained. Heed the warning, enable
	  this option if and only if you know exactly what you are doing, if
	  you are reading this help text, you most likely have no idea :-)

	  The MMC framework is reduced to bare minimum to be useful. No malloc
	  support is needed for the MMC framework operation with this option
	  enabled. The framework supports exactly one MMC device and exactly
	  one MMC driver. The MMC driver can be adjusted to avoid any malloc
	  operations too, which can remove the need for malloc support in SPL
	  and thus further reduce footprint.

config MMC_DAVINCI
	bool "TI DAVINCI Multimedia Card Interface support"
	depends on ARCH_DAVINCI
	default y
	help
	  This selects the TI DAVINCI Multimedia card Interface.
	  If you have an DAVINCI board with a Multimedia Card slot,
	  say Y here.  If unsure, say N.

config MMC_DW
	bool "Synopsys DesignWare Memory Card Interface"
	help
	  This selects support for the Synopsys DesignWare Mobile Storage IP
	  block, this provides host support for SD and MMC interfaces, in both
	  PIO, internal DMA mode and external DMA mode.

config MMC_DW_EXYNOS
	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
	depends on ARCH_EXYNOS
	depends on MMC_DW
	default y
	help
	  This selects support for Samsung Exynos SoC specific extensions to the
	  Synopsys DesignWare Memory Card Interface driver. Select this option
	  for platforms based on Exynos4 and Exynos5 SoC's.

config MMC_DW_K3
	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
	depends on MMC_DW
	help
	  This selects support for Hisilicon K3 SoC specific extensions to the
	  Synopsys DesignWare Memory Card Interface driver. Select this option
	  for platforms based on Hisilicon K3 SoC's.

config MMC_DW_ROCKCHIP
	bool "Rockchip SD/MMC controller support"
	depends on DM_MMC && OF_CONTROL
	depends on MMC_DW
	help
	  This enables support for the Rockchip SD/MMM controller, which is
	  based on Designware IP. The device is compatible with at least
	  SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
	  as removeable SD and micro-SD cards.

config MMC_DW_SOCFPGA
	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
	depends on ARCH_SOCFPGA
	depends on MMC_DW
	default y
	help
	  This selects support for Altera SOCFPGA specific extensions to the
	  Synopsys DesignWare Memory Card Interface driver. Select this option
	  for platforms based on Altera SOCFPGA.

config MMC_MXC
	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
	help
	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
	  with a Multimedia Card slot, say Y here.

	  If unsure, say N.

config MMC_MXS
	bool "Freescale MXS Multimedia Card Interface support"
	help
	  This selects the Freescale SSP MMC controller found on MXS based
	  platforms like mx23/28.

	  If unsure, say N.

config MMC_OMAP_HS
	bool "TI OMAP High Speed Multimedia Card Interface support"
	help
	  This selects the TI OMAP High Speed Multimedia card Interface.
	  If you have an omap2plus board with a Multimedia Card slot,
	  say Y here.

	  If unsure, say N.

config SH_SDHI
	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
	depends on RMOBILE
	help
	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform

config MMC_UNIPHIER
	bool "UniPhier SD/MMC Host Controller support"
	depends on ARCH_UNIPHIER
	depends on BLK && DM_MMC_OPS
	depends on OF_CONTROL
	help
	  This selects support for the SD/MMC Host Controller on UniPhier SoCs.

config MMC_SANDBOX
	bool "Sandbox MMC support"
	depends on SANDBOX
	depends on BLK && DM_MMC_OPS && OF_CONTROL
	help
	  This select a dummy sandbox MMC driver. At present this does nothing
	  other than allow sandbox to be build with MMC support. This
	  improves build coverage for sandbox and makes it easier to detect
	  MMC build errors with sandbox.

config MMC_SDHCI
	bool "Secure Digital Host Controller Interface support"
	help
	  This selects the generic Secure Digital Host Controller Interface.
	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
	  and Toshiba(R). Most controllers found in laptops are of this type.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_IO_ACCESSORS
	bool
	depends on MMC_SDHCI
	help
	  This is silent Kconfig symbol that is selected by the drivers that
	  need to overwrite SDHCI IO memory accessors.

config MMC_SDHCI_SDMA
	bool "Support SDHCI SDMA"
	depends on MMC_SDHCI
	help
	  This enables support for the SDMA (Single Operation DMA) defined
	  in the SD Host Controller Standard Specification Version 1.00 .

config MMC_SDHCI_ATMEL
	bool "Atmel SDHCI controller support"
	depends on ARCH_AT91
	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
	depends on MMC_SDHCI
	help
	  This enables support for the Atmel SDHCI controller, which supports
	  the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
	  Memory Card Specification V3.0, and the SDIO V3.0 specification.
	  It is compliant with the SD Host Controller Standard V3.0
	  specification.

config MMC_SDHCI_BCM2835
	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
	depends on ARCH_BCM283X
	depends on MMC_SDHCI
	select MMC_SDHCI_IO_ACCESSORS
	help
	  This selects the BCM2835 SD/MMC controller.

	  If you have a BCM2835 platform with SD or MMC devices,
	  say Y here.

	  If unsure, say N.

config MMC_SDHCI_CADENCE
	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
	depends on BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	depends on OF_CONTROL
	help
	  This selects the Cadence SD/SDIO/eMMC driver.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_KONA
	bool "SDHCI support on Broadcom KONA platform"
	depends on MMC_SDHCI
	help
	  This selects the Broadcom Kona Secure Digital Host Controller
	  Interface(SDHCI) support.
	  This is used in Broadcom mobile SoCs.

	  If you have a controller with this interface, say Y here.

config MMC_SDHCI_MSM
	bool "Qualcomm SDHCI controller"
	depends on BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	help
	  Enables support for SDHCI 2.0 controller present on some Qualcomm
          Snapdragon devices. This device is compatible with eMMC v4.5 and
          SD 3.0 specifications. Both SD and eMMC devices are supported.
	  Card-detect gpios are not supported.

config MMC_SDHCI_MV
	bool "SDHCI support on Marvell platform"
	depends on ARCH_MVEBU
	depends on MMC_SDHCI
	help
	  This selects the Secure Digital Host Controller Interface on
	  Marvell platform.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_PIC32
	bool "Microchip PIC32 on-chip SDHCI support"
	depends on DM_MMC && MACH_PIC32
	depends on MMC_SDHCI
	help
	  Support for Microchip PIC32 SDHCI controller.

config MMC_SDHCI_ROCKCHIP
	bool "Arasan SDHCI controller for Rockchip support"
	depends on ARCH_ROCKCHIP
	depends on DM_MMC && BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	help
	  Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform

config MMC_SDHCI_S5P
	bool "SDHCI support on Samsung S5P SoC"
	depends on MMC_SDHCI
	help
	  This selects the Secure Digital Host Controller Interface (SDHCI)
	  on Samsung S5P SoCs.

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_SPEAR
	bool "SDHCI support on ST SPEAr platform"
	depends on MMC_SDHCI
	help
	  This selects the Secure Digital Host Controller Interface (SDHCI)
	  often referrered to as the HSMMC block in some of the ST SPEAR range
	  of SoC

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_XENON
	bool "SDHCI support for the Xenon SDHCI controller"
	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
	help
	  Support for Xenon SDHCI host controller on Marvell Armada 3700
	  7k/8k ARM SoCs platforms

	  If you have a controller with this interface, say Y here.

	  If unsure, say N.

config MMC_SDHCI_TEGRA
	bool "SDHCI platform support for the Tegra SD/MMC Controller"
	depends on TEGRA
	default y
	help
	  This selects the Tegra SD/MMC controller. If you have a Tegra
	  platform with SD or MMC devices, say Y here.

	  If unsure, say N.

config MMC_SDHCI_ZYNQ
	bool "Arasan SDHCI controller support"
	depends on ARCH_ZYNQ || ARCH_ZYNQMP
	depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
	depends on MMC_SDHCI
	help
	  Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform

config MMC_SUNXI
	bool "Allwinner sunxi SD/MMC Host Controller support"
	depends on ARCH_SUNXI && !UART0_PORT_F
	default y
	help
	  This selects support for the SD/MMC Host Controller on
	  Allwinner sunxi SoCs.

endif

endmenu

config SYS_FSL_ERRATUM_ESDHC111
	bool

config SYS_FSL_ERRATUM_ESDHC13
	bool

config SYS_FSL_ERRATUM_ESDHC135
	bool

config SYS_FSL_ERRATUM_ESDHC_A001
	bool
Commit	Line	Data
72d42bad NI	1	menu "MMC Host controller Support"
72d42bad NI	2
7a777f6d	3	config MMC
c2726995 MY	4	bool "MMC/SD/SDIO card support"
c2726995 MY	5	default ARM \|\| PPC \|\| SANDBOX
7a777f6d	6	help
c2726995 MY	7	This selects MultiMediaCard, Secure Digital and Secure
	8	Digital I/O support.
	9
	10	If you want MMC/SD/SDIO support, you should say Y here and
	11	also to your specific host controller driver.
7a777f6d	12
54925327 MY	13	config GENERIC_MMC
	14	bool "Generic MMC driver framework"
	15	default MMC
	16
e7ecf7cb SG	17	config DM_MMC
	18	bool "Enable MMC controllers using Driver Model"
	19	depends on DM
	20	help
62a3b7dd	21	This enables the MultiMediaCard (MMC) uclass which supports MMC and
e7ecf7cb SG	22	Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
	23	and non-removable (e.g. eMMC chip) devices are supported. These
	24	appear as block devices in U-Boot and can support filesystems such
	25	as EXT4 and FAT.
	26
8ca51e51 SG	27	config DM_MMC_OPS
	28	bool "Support MMC controller operations using Driver Model"
	29	depends on DM_MMC
252788b4	30	default y if DM_MMC
8ca51e51 SG	31	help
	32	Driver model provides a means of supporting device operations. This
	33	option moves MMC operations under the control of driver model. The
	34	option will be removed as soon as all DM_MMC drivers use it, as it
	35	will the only supported behaviour.
	36
e298c46a MY	37	if MMC
e298c46a MY	38
b5b838f1 MV	39	config SPL_MMC_TINY
	40	bool "Tiny MMC framework in SPL"
	41	help
	42	Enable MMC framework tinification support. This option is useful if
	43	if your SPL is extremely size constrained. Heed the warning, enable
	44	this option if and only if you know exactly what you are doing, if
	45	you are reading this help text, you most likely have no idea :-)
	46
	47	The MMC framework is reduced to bare minimum to be useful. No malloc
	48	support is needed for the MMC framework operation with this option
	49	enabled. The framework supports exactly one MMC device and exactly
	50	one MMC driver. The MMC driver can be adjusted to avoid any malloc
	51	operations too, which can remove the need for malloc support in SPL
	52	and thus further reduce footprint.
	53
1d2c0506 MY	54	config MMC_DAVINCI
	55	bool "TI DAVINCI Multimedia Card Interface support"
	56	depends on ARCH_DAVINCI
	57	default y
	58	help
	59	This selects the TI DAVINCI Multimedia card Interface.
	60	If you have an DAVINCI board with a Multimedia Card slot,
	61	say Y here. If unsure, say N.
	62
55ed3b46 MY	63	config MMC_DW
	64	bool "Synopsys DesignWare Memory Card Interface"
	65	help
	66	This selects support for the Synopsys DesignWare Mobile Storage IP
	67	block, this provides host support for SD and MMC interfaces, in both
	68	PIO, internal DMA mode and external DMA mode.
	69
ae4c81e9 MY	70	config MMC_DW_EXYNOS
	71	bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
	72	depends on ARCH_EXYNOS
	73	depends on MMC_DW
	74	default y
	75	help
	76	This selects support for Samsung Exynos SoC specific extensions to the
	77	Synopsys DesignWare Memory Card Interface driver. Select this option
	78	for platforms based on Exynos4 and Exynos5 SoC's.
	79
	80	config MMC_DW_K3
	81	bool "K3 specific extensions for Synopsys DW Memory Card Interface"
	82	depends on MMC_DW
	83	help
	84	This selects support for Hisilicon K3 SoC specific extensions to the
	85	Synopsys DesignWare Memory Card Interface driver. Select this option
	86	for platforms based on Hisilicon K3 SoC's.
	87
fed44087	88	config MMC_DW_ROCKCHIP
a8cb4fb5 SG	89	bool "Rockchip SD/MMC controller support"
a8cb4fb5 SG	90	depends on DM_MMC && OF_CONTROL
55ed3b46	91	depends on MMC_DW
a8cb4fb5 SG	92	help
	93	This enables support for the Rockchip SD/MMM controller, which is
	94	based on Designware IP. The device is compatible with at least
	95	SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
	96	as removeable SD and micro-SD cards.
	97
ae4c81e9 MY	98	config MMC_DW_SOCFPGA
	99	bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
	100	depends on ARCH_SOCFPGA
	101	depends on MMC_DW
	102	default y
	103	help
	104	This selects support for Altera SOCFPGA specific extensions to the
	105	Synopsys DesignWare Memory Card Interface driver. Select this option
	106	for platforms based on Altera SOCFPGA.
	107
1d2c0506 MY	108	config MMC_MXC
	109	bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
	110	help
	111	This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
	112	Multimedia Card Interface. If you have an i.MX or MPC512x platform
	113	with a Multimedia Card slot, say Y here.
	114
	115	If unsure, say N.
	116
	117	config MMC_MXS
	118	bool "Freescale MXS Multimedia Card Interface support"
	119	help
	120	This selects the Freescale SSP MMC controller found on MXS based
	121	platforms like mx23/28.
	122
	123	If unsure, say N.
	124
	125	config MMC_OMAP_HS
	126	bool "TI OMAP High Speed Multimedia Card Interface support"
	127	help
	128	This selects the TI OMAP High Speed Multimedia card Interface.
	129	If you have an omap2plus board with a Multimedia Card slot,
	130	say Y here.
	131
	132	If unsure, say N.
	133
72d42bad NI	134	config SH_SDHI
	135	bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
	136	depends on RMOBILE
	137	help
	138	Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
	139
a111bfbf MY	140	config MMC_UNIPHIER
	141	bool "UniPhier SD/MMC Host Controller support"
	142	depends on ARCH_UNIPHIER
9c720c81 MY	143	depends on BLK && DM_MMC_OPS
9c720c81 MY	144	depends on OF_CONTROL
a111bfbf MY	145	help
	146	This selects support for the SD/MMC Host Controller on UniPhier SoCs.
	147
a5995a5d	148	config MMC_SANDBOX
f376a3cb	149	bool "Sandbox MMC support"
a5995a5d MY	150	depends on SANDBOX
a5995a5d MY	151	depends on BLK && DM_MMC_OPS && OF_CONTROL
f376a3cb SG	152	help
	153	This select a dummy sandbox MMC driver. At present this does nothing
	154	other than allow sandbox to be build with MMC support. This
	155	improves build coverage for sandbox and makes it easier to detect
	156	MMC build errors with sandbox.
	157
e1ce61fb MY	158	config MMC_SDHCI
	159	bool "Secure Digital Host Controller Interface support"
	160	help
	161	This selects the generic Secure Digital Host Controller Interface.
	162	It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
	163	and Toshiba(R). Most controllers found in laptops are of this type.
	164
	165	If you have a controller with this interface, say Y here.
	166
	167	If unsure, say N.
	168
3d3a74cc MY	169	config MMC_SDHCI_IO_ACCESSORS
	170	bool
	171	depends on MMC_SDHCI
	172	help
	173	This is silent Kconfig symbol that is selected by the drivers that
	174	need to overwrite SDHCI IO memory accessors.
	175
45a68fe2 MY	176	config MMC_SDHCI_SDMA
	177	bool "Support SDHCI SDMA"
	178	depends on MMC_SDHCI
	179	help
	180	This enables support for the SDMA (Single Operation DMA) defined
	181	in the SD Host Controller Standard Specification Version 1.00 .
	182
dd3b64eb MY	183	config MMC_SDHCI_ATMEL
	184	bool "Atmel SDHCI controller support"
	185	depends on ARCH_AT91
	186	depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
	187	depends on MMC_SDHCI
	188	help
	189	This enables support for the Atmel SDHCI controller, which supports
	190	the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
	191	Memory Card Specification V3.0, and the SDIO V3.0 specification.
	192	It is compliant with the SD Host Controller Standard V3.0
	193	specification.
	194
45a68fe2 MY	195	config MMC_SDHCI_BCM2835
	196	tristate "SDHCI support for the BCM2835 SD/MMC Controller"
	197	depends on ARCH_BCM283X
	198	depends on MMC_SDHCI
3d3a74cc	199	select MMC_SDHCI_IO_ACCESSORS
45a68fe2 MY	200	help
	201	This selects the BCM2835 SD/MMC controller.
	202
	203	If you have a BCM2835 platform with SD or MMC devices,
	204	say Y here.
	205
	206	If unsure, say N.
	207
e5e7a7c2 MY	208	config MMC_SDHCI_CADENCE
	209	bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
	210	depends on BLK && DM_MMC_OPS
	211	depends on MMC_SDHCI
	212	depends on OF_CONTROL
	213	help
	214	This selects the Cadence SD/SDIO/eMMC driver.
	215
	216	If you have a controller with this interface, say Y here.
	217
	218	If unsure, say N.
	219
45a68fe2 MY	220	config MMC_SDHCI_KONA
	221	bool "SDHCI support on Broadcom KONA platform"
	222	depends on MMC_SDHCI
	223	help
	224	This selects the Broadcom Kona Secure Digital Host Controller
	225	Interface(SDHCI) support.
	226	This is used in Broadcom mobile SoCs.
	227
	228	If you have a controller with this interface, say Y here.
	229
360c67d5 MY	230	config MMC_SDHCI_MSM
	231	bool "Qualcomm SDHCI controller"
	232	depends on BLK && DM_MMC_OPS
	233	depends on MMC_SDHCI
	234	help
	235	Enables support for SDHCI 2.0 controller present on some Qualcomm
	236	Snapdragon devices. This device is compatible with eMMC v4.5 and
	237	SD 3.0 specifications. Both SD and eMMC devices are supported.
	238	Card-detect gpios are not supported.
	239
45a68fe2 MY	240	config MMC_SDHCI_MV
	241	bool "SDHCI support on Marvell platform"
	242	depends on ARCH_MVEBU
	243	depends on MMC_SDHCI
	244	help
	245	This selects the Secure Digital Host Controller Interface on
	246	Marvell platform.
	247
	248	If you have a controller with this interface, say Y here.
	249
	250	If unsure, say N.
	251
1b858770 MY	252	config MMC_SDHCI_PIC32
	253	bool "Microchip PIC32 on-chip SDHCI support"
	254	depends on DM_MMC && MACH_PIC32
	255	depends on MMC_SDHCI
	256	help
	257	Support for Microchip PIC32 SDHCI controller.
	258
facc8058 MY	259	config MMC_SDHCI_ROCKCHIP
	260	bool "Arasan SDHCI controller for Rockchip support"
	261	depends on ARCH_ROCKCHIP
	262	depends on DM_MMC && BLK && DM_MMC_OPS
	263	depends on MMC_SDHCI
	264	help
	265	Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
	266
45a68fe2 MY	267	config MMC_SDHCI_S5P
	268	bool "SDHCI support on Samsung S5P SoC"
	269	depends on MMC_SDHCI
	270	help
	271	This selects the Secure Digital Host Controller Interface (SDHCI)
	272	on Samsung S5P SoCs.
	273
	274	If you have a controller with this interface, say Y here.
	275
	276	If unsure, say N.
	277
	278	config MMC_SDHCI_SPEAR
	279	bool "SDHCI support on ST SPEAr platform"
	280	depends on MMC_SDHCI
	281	help
	282	This selects the Secure Digital Host Controller Interface (SDHCI)
	283	often referrered to as the HSMMC block in some of the ST SPEAR range
	284	of SoC
	285
	286	If you have a controller with this interface, say Y here.
	287
	288	If unsure, say N.
	289
b6acb5f1 SR	290	config MMC_SDHCI_XENON
	291	bool "SDHCI support for the Xenon SDHCI controller"
	292	depends on MMC_SDHCI && DM_MMC && OF_CONTROL
	293	help
	294	Support for Xenon SDHCI host controller on Marvell Armada 3700
	295	7k/8k ARM SoCs platforms
	296
	297	If you have a controller with this interface, say Y here.
	298
	299	If unsure, say N.
	300
1d2c0506 MY	301	config MMC_SDHCI_TEGRA
	302	bool "SDHCI platform support for the Tegra SD/MMC Controller"
	303	depends on TEGRA
	304	default y
	305	help
	306	This selects the Tegra SD/MMC controller. If you have a Tegra
	307	platform with SD or MMC devices, say Y here.
	308
	309	If unsure, say N.
	310
08aa0334 MY	311	config MMC_SDHCI_ZYNQ
	312	bool "Arasan SDHCI controller support"
	313	depends on ARCH_ZYNQ \|\| ARCH_ZYNQMP
	314	depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
	315	depends on MMC_SDHCI
	316	help
	317	Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
	318
1d2c0506 MY	319	config MMC_SUNXI
1d2c0506 MY	320	bool "Allwinner sunxi SD/MMC Host Controller support"
0ad178c1	321	depends on ARCH_SUNXI && !UART0_PORT_F
1d2c0506 MY	322	default y
	323	help
	324	This selects support for the SD/MMC Host Controller on
	325	Allwinner sunxi SoCs.
	326
e298c46a MY	327	endif
e298c46a MY	328
72d42bad	329	endmenu
c01e4a1a YS	330
	331	config SYS_FSL_ERRATUM_ESDHC111
	332	bool
	333
	334	config SYS_FSL_ERRATUM_ESDHC13
	335	bool
	336
	337	config SYS_FSL_ERRATUM_ESDHC135
	338	bool
	339
	340	config SYS_FSL_ERRATUM_ESDHC_A001
	341	bool