[people/ms/u-boot.git] / drivers / rtc / ds1337.c

/*
 * (C) Copyright 2001-2008
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 * Keith Outwater, keith_outwater@mvis.com`
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
 * DS1337 Real Time Clock (RTC).
 */

#include <common.h>
#include <command.h>
#include <rtc.h>
#include <i2c.h>

#if defined(CONFIG_CMD_DATE)

/*
 * RTC register addresses
 */
#if defined CONFIG_RTC_DS1337
#define RTC_SEC_REG_ADDR	0x0
#define RTC_MIN_REG_ADDR	0x1
#define RTC_HR_REG_ADDR		0x2
#define RTC_DAY_REG_ADDR	0x3
#define RTC_DATE_REG_ADDR	0x4
#define RTC_MON_REG_ADDR	0x5
#define RTC_YR_REG_ADDR		0x6
#define RTC_CTL_REG_ADDR	0x0e
#define RTC_STAT_REG_ADDR	0x0f
#define RTC_TC_REG_ADDR		0x10
#elif defined CONFIG_RTC_DS1388
#define RTC_SEC_REG_ADDR	0x1
#define RTC_MIN_REG_ADDR	0x2
#define RTC_HR_REG_ADDR		0x3
#define RTC_DAY_REG_ADDR	0x4
#define RTC_DATE_REG_ADDR	0x5
#define RTC_MON_REG_ADDR	0x6
#define RTC_YR_REG_ADDR		0x7
#define RTC_CTL_REG_ADDR	0x0c
#define RTC_STAT_REG_ADDR	0x0b
#define RTC_TC_REG_ADDR		0x0a
#endif

/*
 * RTC control register bits
 */
#define RTC_CTL_BIT_A1IE	0x1	/* Alarm 1 interrupt enable	*/
#define RTC_CTL_BIT_A2IE	0x2	/* Alarm 2 interrupt enable	*/
#define RTC_CTL_BIT_INTCN	0x4	/* Interrupt control		*/
#define RTC_CTL_BIT_RS1		0x8	/* Rate select 1		*/
#define RTC_CTL_BIT_RS2		0x10	/* Rate select 2		*/
#define RTC_CTL_BIT_DOSC	0x80	/* Disable Oscillator		*/

/*
 * RTC status register bits
 */
#define RTC_STAT_BIT_A1F	0x1	/* Alarm 1 flag			*/
#define RTC_STAT_BIT_A2F	0x2	/* Alarm 2 flag			*/
#define RTC_STAT_BIT_OSF	0x80	/* Oscillator stop flag		*/


static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);

/*
 * Get the current time from the RTC
 */
int rtc_get (struct rtc_time *tmp)
{
	int rel = 0;
	uchar sec, min, hour, mday, wday, mon_cent, year, control, status;

	control = rtc_read (RTC_CTL_REG_ADDR);
	status = rtc_read (RTC_STAT_REG_ADDR);
	sec = rtc_read (RTC_SEC_REG_ADDR);
	min = rtc_read (RTC_MIN_REG_ADDR);
	hour = rtc_read (RTC_HR_REG_ADDR);
	wday = rtc_read (RTC_DAY_REG_ADDR);
	mday = rtc_read (RTC_DATE_REG_ADDR);
	mon_cent = rtc_read (RTC_MON_REG_ADDR);
	year = rtc_read (RTC_YR_REG_ADDR);

	/* No century bit, assume year 2000 */
#ifdef CONFIG_RTC_DS1388
	mon_cent |= 0x80;
#endif

	debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
		"hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
		year, mon_cent, mday, wday, hour, min, sec, control, status);

	if (status & RTC_STAT_BIT_OSF) {
		printf ("### Warning: RTC oscillator has stopped\n");
		/* clear the OSF flag */
		rtc_write (RTC_STAT_REG_ADDR,
			   rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
		rel = -1;
	}

	tmp->tm_sec  = bcd2bin (sec & 0x7F);
	tmp->tm_min  = bcd2bin (min & 0x7F);
	tmp->tm_hour = bcd2bin (hour & 0x3F);
	tmp->tm_mday = bcd2bin (mday & 0x3F);
	tmp->tm_mon  = bcd2bin (mon_cent & 0x1F);
	tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
	tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
	tmp->tm_yday = 0;
	tmp->tm_isdst= 0;

	debug("Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);

	return rel;
}


/*
 * Set the RTC
 */
int rtc_set (struct rtc_time *tmp)
{
	uchar century;

	debug("Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);

	rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));

	century = (tmp->tm_year >= 2000) ? 0x80 : 0;
	rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century);

	rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
	rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));

	return 0;
}


/*
 * Reset the RTC.  We also enable the oscillator output on the
 * SQW/INTB* pin and program it for 32,768 Hz output. Note that
 * according to the datasheet, turning on the square wave output
 * increases the current drain on the backup battery from about
 * 600 nA to 2uA. Define CONFIG_SYS_RTC_DS1337_NOOSC if you wish to turn
 * off the OSC output.
 */

#ifdef CONFIG_SYS_RTC_DS1337_NOOSC
 #define RTC_DS1337_RESET_VAL \
	(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#else
 #define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#endif
void rtc_reset (void)
{
#ifdef CONFIG_SYS_RTC_DS1337
	rtc_write (RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL);
#elif defined CONFIG_SYS_RTC_DS1388
	rtc_write(RTC_CTL_REG_ADDR, 0x0); /* hw default */
#endif
#ifdef CONFIG_SYS_DS1339_TCR_VAL
	rtc_write (RTC_TC_REG_ADDR, CONFIG_SYS_DS1339_TCR_VAL);
#endif
#ifdef CONFIG_SYS_DS1388_TCR_VAL
	rtc_write(RTC_TC_REG_ADDR, CONFIG_SYS_DS1388_TCR_VAL);
#endif
}


/*
 * Helper functions
 */

static
uchar rtc_read (uchar reg)
{
	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
}


static void rtc_write (uchar reg, uchar val)
{
	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
}

#endif
Commit	Line	Data
5d3207da	1	/*
5b5eb9ca	2	* (C) Copyright 2001-2008
5d3207da WD	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	* Keith Outwater, keith_outwater@mvis.com`
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
5d3207da WD	7	*/
	8
	9	/*
	10	* Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
	11	* DS1337 Real Time Clock (RTC).
	12	*/
	13
	14	#include <common.h>
	15	#include <command.h>
	16	#include <rtc.h>
	17	#include <i2c.h>
	18
871c18dd	19	#if defined(CONFIG_CMD_DATE)
5d3207da	20
5d3207da WD	21	/*
	22	* RTC register addresses
	23	*/
8fde2f3a	24	#if defined CONFIG_RTC_DS1337
5d3207da WD	25	#define RTC_SEC_REG_ADDR 0x0
	26	#define RTC_MIN_REG_ADDR 0x1
	27	#define RTC_HR_REG_ADDR 0x2
	28	#define RTC_DAY_REG_ADDR 0x3
	29	#define RTC_DATE_REG_ADDR 0x4
	30	#define RTC_MON_REG_ADDR 0x5
	31	#define RTC_YR_REG_ADDR 0x6
	32	#define RTC_CTL_REG_ADDR 0x0e
	33	#define RTC_STAT_REG_ADDR 0x0f
b0078c87	34	#define RTC_TC_REG_ADDR 0x10
8fde2f3a KE	35	#elif defined CONFIG_RTC_DS1388
	36	#define RTC_SEC_REG_ADDR 0x1
	37	#define RTC_MIN_REG_ADDR 0x2
	38	#define RTC_HR_REG_ADDR 0x3
	39	#define RTC_DAY_REG_ADDR 0x4
	40	#define RTC_DATE_REG_ADDR 0x5
	41	#define RTC_MON_REG_ADDR 0x6
	42	#define RTC_YR_REG_ADDR 0x7
	43	#define RTC_CTL_REG_ADDR 0x0c
	44	#define RTC_STAT_REG_ADDR 0x0b
	45	#define RTC_TC_REG_ADDR 0x0a
	46	#endif
5d3207da WD	47
	48	/*
	49	* RTC control register bits
	50	*/
5b5eb9ca WD	51	#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */
	52	#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */
	53	#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */
	54	#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */
	55	#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */
	56	#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */
5d3207da WD	57
	58	/*
	59	* RTC status register bits
	60	*/
5b5eb9ca WD	61	#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */
	62	#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */
	63	#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */
5d3207da WD	64
	65
	66	static uchar rtc_read (uchar reg);
	67	static void rtc_write (uchar reg, uchar val);
5d3207da WD	68
	69	/*
	70	* Get the current time from the RTC
	71	*/
b73a19e1	72	int rtc_get (struct rtc_time *tmp)
5d3207da	73	{
b73a19e1	74	int rel = 0;
5d3207da WD	75	uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
	76
	77	control = rtc_read (RTC_CTL_REG_ADDR);
	78	status = rtc_read (RTC_STAT_REG_ADDR);
	79	sec = rtc_read (RTC_SEC_REG_ADDR);
	80	min = rtc_read (RTC_MIN_REG_ADDR);
	81	hour = rtc_read (RTC_HR_REG_ADDR);
	82	wday = rtc_read (RTC_DAY_REG_ADDR);
	83	mday = rtc_read (RTC_DATE_REG_ADDR);
	84	mon_cent = rtc_read (RTC_MON_REG_ADDR);
	85	year = rtc_read (RTC_YR_REG_ADDR);
	86
8fde2f3a KE	87	/* No century bit, assume year 2000 */
	88	#ifdef CONFIG_RTC_DS1388
	89	mon_cent \|= 0x80;
	90	#endif
	91
88b2533d	92	debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
5d3207da WD	93	"hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
	94	year, mon_cent, mday, wday, hour, min, sec, control, status);
	95
	96	if (status & RTC_STAT_BIT_OSF) {
	97	printf ("### Warning: RTC oscillator has stopped\n");
	98	/* clear the OSF flag */
	99	rtc_write (RTC_STAT_REG_ADDR,
	100	rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
b73a19e1	101	rel = -1;
5d3207da WD	102	}
	103
	104	tmp->tm_sec = bcd2bin (sec & 0x7F);
	105	tmp->tm_min = bcd2bin (min & 0x7F);
	106	tmp->tm_hour = bcd2bin (hour & 0x3F);
	107	tmp->tm_mday = bcd2bin (mday & 0x3F);
	108	tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
	109	tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
	110	tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
	111	tmp->tm_yday = 0;
	112	tmp->tm_isdst= 0;
	113
88b2533d	114	debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
5d3207da WD	115	tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
5d3207da WD	116	tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
b73a19e1 YT	117
b73a19e1 YT	118	return rel;
5d3207da WD	119	}
	120
	121
	122	/*
	123	* Set the RTC
	124	*/
d1e23194	125	int rtc_set (struct rtc_time *tmp)
5d3207da WD	126	{
	127	uchar century;
	128
88b2533d	129	debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
5d3207da WD	130	tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
	131	tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
	132
	133	rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
	134
	135	century = (tmp->tm_year >= 2000) ? 0x80 : 0;
	136	rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) \| century);
	137
	138	rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
	139	rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
	140	rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
	141	rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
	142	rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
d1e23194 JCPV	143
d1e23194 JCPV	144	return 0;
5d3207da WD	145	}
	146
	147
	148	/*
	149	* Reset the RTC. We also enable the oscillator output on the
	150	* SQW/INTB* pin and program it for 32,768 Hz output. Note that
	151	* according to the datasheet, turning on the square wave output
	152	* increases the current drain on the backup battery from about
6d0f6bcf	153	* 600 nA to 2uA. Define CONFIG_SYS_RTC_DS1337_NOOSC if you wish to turn
da8808df	154	* off the OSC output.
5d3207da	155	*/
8fde2f3a	156
6d0f6bcf	157	#ifdef CONFIG_SYS_RTC_DS1337_NOOSC
da8808df	158	#define RTC_DS1337_RESET_VAL \
5b5eb9ca	159	(RTC_CTL_BIT_INTCN \| RTC_CTL_BIT_RS1 \| RTC_CTL_BIT_RS2)
da8808df JT	160	#else
	161	#define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 \| RTC_CTL_BIT_RS2)
	162	#endif
5d3207da WD	163	void rtc_reset (void)
5d3207da WD	164	{
8fde2f3a	165	#ifdef CONFIG_SYS_RTC_DS1337
da8808df	166	rtc_write (RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL);
8fde2f3a KE	167	#elif defined CONFIG_SYS_RTC_DS1388
	168	rtc_write(RTC_CTL_REG_ADDR, 0x0); /* hw default */
	169	#endif
b0078c87 WP	170	#ifdef CONFIG_SYS_DS1339_TCR_VAL
	171	rtc_write (RTC_TC_REG_ADDR, CONFIG_SYS_DS1339_TCR_VAL);
	172	#endif
8fde2f3a KE	173	#ifdef CONFIG_SYS_DS1388_TCR_VAL
	174	rtc_write(RTC_TC_REG_ADDR, CONFIG_SYS_DS1388_TCR_VAL);
	175	#endif
5d3207da WD	176	}
	177
	178
	179	/*
	180	* Helper functions
	181	*/
	182
	183	static
	184	uchar rtc_read (uchar reg)
	185	{
6d0f6bcf	186	return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg));
5d3207da WD	187	}
	188
	189
	190	static void rtc_write (uchar reg, uchar val)
	191	{
6d0f6bcf	192	i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val);
5d3207da WD	193	}
5d3207da WD	194
068b60a0	195	#endif