]>
Commit | Line | Data |
---|---|---|
3f542974 PS |
1 | /* |
2 | * This program is free software; you can redistribute it and/or modify | |
3 | * it under the terms of the GNU General Public License as published by | |
4 | * the Free Software Foundation; either version 2 of the License, or | |
5 | * (at your option) any later version. | |
6 | * | |
7 | * This program is distributed in the hope that it will be useful, | |
8 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
9 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
10 | * GNU General Public License for more details. | |
11 | * | |
12 | * You should have received a copy of the GNU General Public License | |
13 | * along with this program; if not, write to the Free Software | |
14 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
15 | * | |
16 | * Clean ups from Moschip version and a few ioctl implementations by: | |
17 | * Paul B Schroeder <pschroeder "at" uplogix "dot" com> | |
18 | * | |
19 | * Originally based on drivers/usb/serial/io_edgeport.c which is: | |
20 | * Copyright (C) 2000 Inside Out Networks, All rights reserved. | |
21 | * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com> | |
22 | * | |
23 | */ | |
24 | ||
25 | #include <linux/kernel.h> | |
26 | #include <linux/errno.h> | |
27 | #include <linux/init.h> | |
28 | #include <linux/slab.h> | |
29 | #include <linux/tty.h> | |
30 | #include <linux/tty_driver.h> | |
31 | #include <linux/tty_flip.h> | |
32 | #include <linux/module.h> | |
33 | #include <linux/serial.h> | |
34 | #include <linux/usb.h> | |
35 | #include <linux/usb/serial.h> | |
880af9db | 36 | #include <linux/uaccess.h> |
3f542974 | 37 | |
3f542974 PS |
38 | #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" |
39 | ||
40 | /* | |
41 | * 16C50 UART register defines | |
42 | */ | |
43 | ||
44 | #define LCR_BITS_5 0x00 /* 5 bits/char */ | |
45 | #define LCR_BITS_6 0x01 /* 6 bits/char */ | |
46 | #define LCR_BITS_7 0x02 /* 7 bits/char */ | |
47 | #define LCR_BITS_8 0x03 /* 8 bits/char */ | |
48 | #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */ | |
49 | ||
50 | #define LCR_STOP_1 0x00 /* 1 stop bit */ | |
51 | #define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */ | |
52 | #define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */ | |
53 | #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */ | |
54 | ||
55 | #define LCR_PAR_NONE 0x00 /* No parity */ | |
56 | #define LCR_PAR_ODD 0x08 /* Odd parity */ | |
57 | #define LCR_PAR_EVEN 0x18 /* Even parity */ | |
58 | #define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */ | |
59 | #define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */ | |
60 | #define LCR_PAR_MASK 0x38 /* Mask for parity field */ | |
61 | ||
62 | #define LCR_SET_BREAK 0x40 /* Set Break condition */ | |
63 | #define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */ | |
64 | ||
65 | #define MCR_DTR 0x01 /* Assert DTR */ | |
66 | #define MCR_RTS 0x02 /* Assert RTS */ | |
67 | #define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */ | |
68 | #define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */ | |
69 | #define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */ | |
70 | #define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */ | |
71 | ||
72 | #define MOS7840_MSR_CTS 0x10 /* Current state of CTS */ | |
73 | #define MOS7840_MSR_DSR 0x20 /* Current state of DSR */ | |
74 | #define MOS7840_MSR_RI 0x40 /* Current state of RI */ | |
75 | #define MOS7840_MSR_CD 0x80 /* Current state of CD */ | |
76 | ||
77 | /* | |
78 | * Defines used for sending commands to port | |
79 | */ | |
80 | ||
1e658489 | 81 | #define MOS_WDR_TIMEOUT 5000 /* default urb timeout */ |
3f542974 PS |
82 | |
83 | #define MOS_PORT1 0x0200 | |
84 | #define MOS_PORT2 0x0300 | |
85 | #define MOS_VENREG 0x0000 | |
86 | #define MOS_MAX_PORT 0x02 | |
87 | #define MOS_WRITE 0x0E | |
88 | #define MOS_READ 0x0D | |
89 | ||
90 | /* Requests */ | |
91 | #define MCS_RD_RTYPE 0xC0 | |
92 | #define MCS_WR_RTYPE 0x40 | |
93 | #define MCS_RDREQ 0x0D | |
94 | #define MCS_WRREQ 0x0E | |
95 | #define MCS_CTRL_TIMEOUT 500 | |
96 | #define VENDOR_READ_LENGTH (0x01) | |
97 | ||
98 | #define MAX_NAME_LEN 64 | |
99 | ||
880af9db AC |
100 | #define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */ |
101 | #define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */ | |
3f542974 PS |
102 | |
103 | /* For higher baud Rates use TIOCEXBAUD */ | |
104 | #define TIOCEXBAUD 0x5462 | |
105 | ||
106 | /* vendor id and device id defines */ | |
107 | ||
11e1abb4 | 108 | /* The native mos7840/7820 component */ |
3f542974 PS |
109 | #define USB_VENDOR_ID_MOSCHIP 0x9710 |
110 | #define MOSCHIP_DEVICE_ID_7840 0x7840 | |
111 | #define MOSCHIP_DEVICE_ID_7820 0x7820 | |
0eafe4de | 112 | #define MOSCHIP_DEVICE_ID_7810 0x7810 |
11e1abb4 DL |
113 | /* The native component can have its vendor/device id's overridden |
114 | * in vendor-specific implementations. Such devices can be handled | |
68e24113 | 115 | * by making a change here, in id_table. |
11e1abb4 | 116 | */ |
870408c8 DL |
117 | #define USB_VENDOR_ID_BANDB 0x0856 |
118 | #define BANDB_DEVICE_ID_USO9ML2_2 0xAC22 | |
119 | #define BANDB_DEVICE_ID_USO9ML2_2P 0xBC00 | |
120 | #define BANDB_DEVICE_ID_USO9ML2_4 0xAC24 | |
121 | #define BANDB_DEVICE_ID_USO9ML2_4P 0xBC01 | |
122 | #define BANDB_DEVICE_ID_US9ML2_2 0xAC29 | |
123 | #define BANDB_DEVICE_ID_US9ML2_4 0xAC30 | |
124 | #define BANDB_DEVICE_ID_USPTL4_2 0xAC31 | |
125 | #define BANDB_DEVICE_ID_USPTL4_4 0xAC32 | |
126 | #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 | |
127 | #define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02 | |
128 | #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 | |
129 | #define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03 | |
130 | #define BANDB_DEVICE_ID_USOPTL2_4 0xAC24 | |
3f542974 | 131 | |
9d498bea RL |
132 | /* This driver also supports |
133 | * ATEN UC2324 device using Moschip MCS7840 | |
134 | * ATEN UC2322 device using Moschip MCS7820 | |
135 | */ | |
e9b8cffa TC |
136 | #define USB_VENDOR_ID_ATENINTL 0x0557 |
137 | #define ATENINTL_DEVICE_ID_UC2324 0x2011 | |
9d498bea | 138 | #define ATENINTL_DEVICE_ID_UC2322 0x7820 |
e9b8cffa | 139 | |
11e1abb4 | 140 | /* Interrupt Routine Defines */ |
3f542974 PS |
141 | |
142 | #define SERIAL_IIR_RLS 0x06 | |
143 | #define SERIAL_IIR_MS 0x00 | |
144 | ||
145 | /* | |
146 | * Emulation of the bit mask on the LINE STATUS REGISTER. | |
147 | */ | |
148 | #define SERIAL_LSR_DR 0x0001 | |
149 | #define SERIAL_LSR_OE 0x0002 | |
150 | #define SERIAL_LSR_PE 0x0004 | |
151 | #define SERIAL_LSR_FE 0x0008 | |
152 | #define SERIAL_LSR_BI 0x0010 | |
153 | ||
154 | #define MOS_MSR_DELTA_CTS 0x10 | |
155 | #define MOS_MSR_DELTA_DSR 0x20 | |
156 | #define MOS_MSR_DELTA_RI 0x40 | |
157 | #define MOS_MSR_DELTA_CD 0x80 | |
158 | ||
880af9db | 159 | /* Serial Port register Address */ |
3f542974 PS |
160 | #define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01)) |
161 | #define FIFO_CONTROL_REGISTER ((__u16)(0x02)) | |
162 | #define LINE_CONTROL_REGISTER ((__u16)(0x03)) | |
163 | #define MODEM_CONTROL_REGISTER ((__u16)(0x04)) | |
164 | #define LINE_STATUS_REGISTER ((__u16)(0x05)) | |
165 | #define MODEM_STATUS_REGISTER ((__u16)(0x06)) | |
166 | #define SCRATCH_PAD_REGISTER ((__u16)(0x07)) | |
167 | #define DIVISOR_LATCH_LSB ((__u16)(0x00)) | |
168 | #define DIVISOR_LATCH_MSB ((__u16)(0x01)) | |
169 | ||
170 | #define CLK_MULTI_REGISTER ((__u16)(0x02)) | |
171 | #define CLK_START_VALUE_REGISTER ((__u16)(0x03)) | |
093ea2d3 | 172 | #define GPIO_REGISTER ((__u16)(0x07)) |
3f542974 PS |
173 | |
174 | #define SERIAL_LCR_DLAB ((__u16)(0x0080)) | |
175 | ||
176 | /* | |
177 | * URB POOL related defines | |
178 | */ | |
179 | #define NUM_URBS 16 /* URB Count */ | |
180 | #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */ | |
181 | ||
0eafe4de D |
182 | /* LED on/off milliseconds*/ |
183 | #define LED_ON_MS 500 | |
184 | #define LED_OFF_MS 500 | |
185 | ||
186 | static int device_type; | |
3f542974 | 187 | |
b9c87663 | 188 | static const struct usb_device_id id_table[] = { |
3f542974 PS |
189 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)}, |
190 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, | |
0eafe4de | 191 | {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)}, |
acf509ae | 192 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)}, |
870408c8 | 193 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)}, |
acf509ae | 194 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)}, |
870408c8 | 195 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)}, |
acf509ae CB |
196 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)}, |
197 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)}, | |
198 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)}, | |
199 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)}, | |
11e1abb4 | 200 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, |
870408c8 | 201 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)}, |
acf509ae | 202 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, |
870408c8 | 203 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)}, |
27f1281d | 204 | {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)}, |
e9b8cffa | 205 | {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, |
9d498bea | 206 | {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)}, |
3f542974 PS |
207 | {} /* terminating entry */ |
208 | }; | |
68e24113 | 209 | MODULE_DEVICE_TABLE(usb, id_table); |
3f542974 PS |
210 | |
211 | /* This structure holds all of the local port information */ | |
212 | ||
213 | struct moschip_port { | |
214 | int port_num; /*Actual port number in the device(1,2,etc) */ | |
215 | struct urb *write_urb; /* write URB for this port */ | |
216 | struct urb *read_urb; /* read URB for this port */ | |
217 | __u8 shadowLCR; /* last LCR value received */ | |
218 | __u8 shadowMCR; /* last MCR value received */ | |
219 | char open; | |
0de9a702 | 220 | char open_ports; |
3f542974 | 221 | wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ |
3f542974 | 222 | int delta_msr_cond; |
3f542974 PS |
223 | struct usb_serial_port *port; /* loop back to the owner of this object */ |
224 | ||
880af9db | 225 | /* Offsets */ |
3f542974 PS |
226 | __u8 SpRegOffset; |
227 | __u8 ControlRegOffset; | |
228 | __u8 DcrRegOffset; | |
880af9db | 229 | /* for processing control URBS in interrupt context */ |
3f542974 | 230 | struct urb *control_urb; |
0de9a702 | 231 | struct usb_ctrlrequest *dr; |
3f542974 PS |
232 | char *ctrl_buf; |
233 | int MsrLsr; | |
234 | ||
0de9a702 | 235 | spinlock_t pool_lock; |
3f542974 | 236 | struct urb *write_urb_pool[NUM_URBS]; |
0de9a702 | 237 | char busy[NUM_URBS]; |
50de36f7 | 238 | bool read_urb_busy; |
3f542974 | 239 | |
0eafe4de D |
240 | /* For device(s) with LED indicator */ |
241 | bool has_led; | |
242 | bool led_flag; | |
243 | struct timer_list led_timer1; /* Timer for LED on */ | |
244 | struct timer_list led_timer2; /* Timer for LED off */ | |
245 | }; | |
3f542974 | 246 | |
3f542974 PS |
247 | /* |
248 | * mos7840_set_reg_sync | |
249 | * To set the Control register by calling usb_fill_control_urb function | |
250 | * by passing usb_sndctrlpipe function as parameter. | |
251 | */ | |
252 | ||
253 | static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg, | |
254 | __u16 val) | |
255 | { | |
256 | struct usb_device *dev = port->serial->dev; | |
257 | val = val & 0x00ff; | |
9c134a14 | 258 | dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val); |
3f542974 PS |
259 | |
260 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, | |
261 | MCS_WR_RTYPE, val, reg, NULL, 0, | |
262 | MOS_WDR_TIMEOUT); | |
263 | } | |
264 | ||
265 | /* | |
266 | * mos7840_get_reg_sync | |
267 | * To set the Uart register by calling usb_fill_control_urb function by | |
268 | * passing usb_rcvctrlpipe function as parameter. | |
269 | */ | |
270 | ||
271 | static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg, | |
880af9db | 272 | __u16 *val) |
3f542974 PS |
273 | { |
274 | struct usb_device *dev = port->serial->dev; | |
275 | int ret = 0; | |
9e221a35 JH |
276 | u8 *buf; |
277 | ||
278 | buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); | |
279 | if (!buf) | |
280 | return -ENOMEM; | |
3f542974 PS |
281 | |
282 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, | |
9e221a35 | 283 | MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH, |
3f542974 | 284 | MOS_WDR_TIMEOUT); |
9e221a35 | 285 | *val = buf[0]; |
9c134a14 | 286 | dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val); |
9e221a35 JH |
287 | |
288 | kfree(buf); | |
3f542974 PS |
289 | return ret; |
290 | } | |
291 | ||
292 | /* | |
293 | * mos7840_set_uart_reg | |
294 | * To set the Uart register by calling usb_fill_control_urb function by | |
295 | * passing usb_sndctrlpipe function as parameter. | |
296 | */ | |
297 | ||
298 | static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, | |
299 | __u16 val) | |
300 | { | |
301 | ||
302 | struct usb_device *dev = port->serial->dev; | |
303 | val = val & 0x00ff; | |
880af9db AC |
304 | /* For the UART control registers, the application number need |
305 | to be Or'ed */ | |
0de9a702 | 306 | if (port->serial->num_ports == 4) { |
880af9db AC |
307 | val |= (((__u16) port->number - |
308 | (__u16) (port->serial->minor)) + 1) << 8; | |
3f542974 PS |
309 | } else { |
310 | if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { | |
880af9db | 311 | val |= (((__u16) port->number - |
3f542974 | 312 | (__u16) (port->serial->minor)) + 1) << 8; |
3f542974 | 313 | } else { |
9c134a14 | 314 | val |= (((__u16) port->number - |
3f542974 | 315 | (__u16) (port->serial->minor)) + 2) << 8; |
3f542974 PS |
316 | } |
317 | } | |
9c134a14 | 318 | dev_dbg(&port->dev, "%s application number is %x\n", __func__, val); |
3f542974 PS |
319 | return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, |
320 | MCS_WR_RTYPE, val, reg, NULL, 0, | |
321 | MOS_WDR_TIMEOUT); | |
322 | ||
323 | } | |
324 | ||
325 | /* | |
326 | * mos7840_get_uart_reg | |
327 | * To set the Control register by calling usb_fill_control_urb function | |
328 | * by passing usb_rcvctrlpipe function as parameter. | |
329 | */ | |
330 | static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, | |
880af9db | 331 | __u16 *val) |
3f542974 PS |
332 | { |
333 | struct usb_device *dev = port->serial->dev; | |
334 | int ret = 0; | |
335 | __u16 Wval; | |
9e221a35 JH |
336 | u8 *buf; |
337 | ||
338 | buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); | |
339 | if (!buf) | |
340 | return -ENOMEM; | |
3f542974 | 341 | |
880af9db | 342 | /* Wval is same as application number */ |
0de9a702 | 343 | if (port->serial->num_ports == 4) { |
3f542974 PS |
344 | Wval = |
345 | (((__u16) port->number - (__u16) (port->serial->minor)) + | |
346 | 1) << 8; | |
3f542974 PS |
347 | } else { |
348 | if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) { | |
880af9db | 349 | Wval = (((__u16) port->number - |
3f542974 | 350 | (__u16) (port->serial->minor)) + 1) << 8; |
3f542974 | 351 | } else { |
880af9db | 352 | Wval = (((__u16) port->number - |
3f542974 | 353 | (__u16) (port->serial->minor)) + 2) << 8; |
3f542974 PS |
354 | } |
355 | } | |
9c134a14 | 356 | dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval); |
3f542974 | 357 | ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ, |
9e221a35 | 358 | MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH, |
3f542974 | 359 | MOS_WDR_TIMEOUT); |
9e221a35 JH |
360 | *val = buf[0]; |
361 | ||
362 | kfree(buf); | |
3f542974 PS |
363 | return ret; |
364 | } | |
365 | ||
9c134a14 GKH |
366 | static void mos7840_dump_serial_port(struct usb_serial_port *port, |
367 | struct moschip_port *mos7840_port) | |
3f542974 PS |
368 | { |
369 | ||
9c134a14 GKH |
370 | dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset); |
371 | dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset); | |
372 | dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset); | |
3f542974 PS |
373 | |
374 | } | |
375 | ||
376 | /************************************************************************/ | |
377 | /************************************************************************/ | |
378 | /* I N T E R F A C E F U N C T I O N S */ | |
379 | /* I N T E R F A C E F U N C T I O N S */ | |
380 | /************************************************************************/ | |
381 | /************************************************************************/ | |
382 | ||
383 | static inline void mos7840_set_port_private(struct usb_serial_port *port, | |
384 | struct moschip_port *data) | |
385 | { | |
386 | usb_set_serial_port_data(port, (void *)data); | |
387 | } | |
388 | ||
389 | static inline struct moschip_port *mos7840_get_port_private(struct | |
390 | usb_serial_port | |
391 | *port) | |
392 | { | |
393 | return (struct moschip_port *)usb_get_serial_port_data(port); | |
394 | } | |
395 | ||
0de9a702 | 396 | static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) |
3f542974 PS |
397 | { |
398 | struct moschip_port *mos7840_port; | |
399 | struct async_icount *icount; | |
400 | mos7840_port = port; | |
3f542974 PS |
401 | if (new_msr & |
402 | (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI | | |
403 | MOS_MSR_DELTA_CD)) { | |
8c1a07ff | 404 | icount = &mos7840_port->port->icount; |
3f542974 PS |
405 | |
406 | /* update input line counters */ | |
c9fac853 | 407 | if (new_msr & MOS_MSR_DELTA_CTS) |
3f542974 | 408 | icount->cts++; |
c9fac853 | 409 | if (new_msr & MOS_MSR_DELTA_DSR) |
3f542974 | 410 | icount->dsr++; |
c9fac853 | 411 | if (new_msr & MOS_MSR_DELTA_CD) |
3f542974 | 412 | icount->dcd++; |
c9fac853 | 413 | if (new_msr & MOS_MSR_DELTA_RI) |
3f542974 | 414 | icount->rng++; |
e670c6af JH |
415 | |
416 | mos7840_port->delta_msr_cond = 1; | |
a14430db | 417 | wake_up_interruptible(&port->port->delta_msr_wait); |
3f542974 | 418 | } |
3f542974 PS |
419 | } |
420 | ||
0de9a702 | 421 | static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) |
3f542974 PS |
422 | { |
423 | struct async_icount *icount; | |
424 | ||
3f542974 | 425 | if (new_lsr & SERIAL_LSR_BI) { |
880af9db AC |
426 | /* |
427 | * Parity and Framing errors only count if they | |
428 | * occur exclusive of a break being | |
429 | * received. | |
430 | */ | |
3f542974 PS |
431 | new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI); |
432 | } | |
433 | ||
434 | /* update input line counters */ | |
8c1a07ff | 435 | icount = &port->port->icount; |
c9fac853 | 436 | if (new_lsr & SERIAL_LSR_BI) |
3f542974 | 437 | icount->brk++; |
c9fac853 | 438 | if (new_lsr & SERIAL_LSR_OE) |
3f542974 | 439 | icount->overrun++; |
c9fac853 | 440 | if (new_lsr & SERIAL_LSR_PE) |
3f542974 | 441 | icount->parity++; |
c9fac853 | 442 | if (new_lsr & SERIAL_LSR_FE) |
3f542974 | 443 | icount->frame++; |
3f542974 PS |
444 | } |
445 | ||
446 | /************************************************************************/ | |
447 | /************************************************************************/ | |
448 | /* U S B C A L L B A C K F U N C T I O N S */ | |
449 | /* U S B C A L L B A C K F U N C T I O N S */ | |
450 | /************************************************************************/ | |
451 | /************************************************************************/ | |
452 | ||
7d12e780 | 453 | static void mos7840_control_callback(struct urb *urb) |
3f542974 PS |
454 | { |
455 | unsigned char *data; | |
456 | struct moschip_port *mos7840_port; | |
9c134a14 | 457 | struct device *dev = &urb->dev->dev; |
3f542974 | 458 | __u8 regval = 0x0; |
0643c724 | 459 | int status = urb->status; |
3f542974 | 460 | |
cdc97792 | 461 | mos7840_port = urb->context; |
0de9a702 | 462 | |
0643c724 | 463 | switch (status) { |
3f542974 PS |
464 | case 0: |
465 | /* success */ | |
466 | break; | |
467 | case -ECONNRESET: | |
468 | case -ENOENT: | |
469 | case -ESHUTDOWN: | |
470 | /* this urb is terminated, clean up */ | |
9c134a14 | 471 | dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status); |
3f542974 PS |
472 | return; |
473 | default: | |
9c134a14 | 474 | dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status); |
28c3ae9a | 475 | return; |
3f542974 PS |
476 | } |
477 | ||
9c134a14 GKH |
478 | dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length); |
479 | dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__, | |
480 | mos7840_port->MsrLsr, mos7840_port->port_num); | |
3f542974 PS |
481 | data = urb->transfer_buffer; |
482 | regval = (__u8) data[0]; | |
9c134a14 | 483 | dev_dbg(dev, "%s data is %x\n", __func__, regval); |
3f542974 PS |
484 | if (mos7840_port->MsrLsr == 0) |
485 | mos7840_handle_new_msr(mos7840_port, regval); | |
486 | else if (mos7840_port->MsrLsr == 1) | |
487 | mos7840_handle_new_lsr(mos7840_port, regval); | |
3f542974 PS |
488 | } |
489 | ||
490 | static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, | |
880af9db | 491 | __u16 *val) |
3f542974 PS |
492 | { |
493 | struct usb_device *dev = mcs->port->serial->dev; | |
0de9a702 ON |
494 | struct usb_ctrlrequest *dr = mcs->dr; |
495 | unsigned char *buffer = mcs->ctrl_buf; | |
496 | int ret; | |
3f542974 | 497 | |
3f542974 PS |
498 | dr->bRequestType = MCS_RD_RTYPE; |
499 | dr->bRequest = MCS_RDREQ; | |
880af9db | 500 | dr->wValue = cpu_to_le16(Wval); /* 0 */ |
3f542974 PS |
501 | dr->wIndex = cpu_to_le16(reg); |
502 | dr->wLength = cpu_to_le16(2); | |
503 | ||
504 | usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0), | |
505 | (unsigned char *)dr, buffer, 2, | |
506 | mos7840_control_callback, mcs); | |
507 | mcs->control_urb->transfer_buffer_length = 2; | |
508 | ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC); | |
509 | return ret; | |
510 | } | |
511 | ||
0eafe4de D |
512 | static void mos7840_set_led_callback(struct urb *urb) |
513 | { | |
514 | switch (urb->status) { | |
515 | case 0: | |
516 | /* Success */ | |
517 | break; | |
518 | case -ECONNRESET: | |
519 | case -ENOENT: | |
520 | case -ESHUTDOWN: | |
521 | /* This urb is terminated, clean up */ | |
9c134a14 GKH |
522 | dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d", |
523 | __func__, urb->status); | |
0eafe4de D |
524 | break; |
525 | default: | |
9c134a14 GKH |
526 | dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d", |
527 | __func__, urb->status); | |
0eafe4de D |
528 | } |
529 | } | |
530 | ||
531 | static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval, | |
532 | __u16 reg) | |
533 | { | |
534 | struct usb_device *dev = mcs->port->serial->dev; | |
535 | struct usb_ctrlrequest *dr = mcs->dr; | |
536 | ||
537 | dr->bRequestType = MCS_WR_RTYPE; | |
538 | dr->bRequest = MCS_WRREQ; | |
539 | dr->wValue = cpu_to_le16(wval); | |
540 | dr->wIndex = cpu_to_le16(reg); | |
541 | dr->wLength = cpu_to_le16(0); | |
542 | ||
543 | usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0), | |
544 | (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL); | |
545 | ||
546 | usb_submit_urb(mcs->control_urb, GFP_ATOMIC); | |
547 | } | |
548 | ||
549 | static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg, | |
550 | __u16 val) | |
551 | { | |
552 | struct usb_device *dev = port->serial->dev; | |
553 | ||
554 | usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE, | |
555 | val, reg, NULL, 0, MOS_WDR_TIMEOUT); | |
556 | } | |
557 | ||
558 | static void mos7840_led_off(unsigned long arg) | |
559 | { | |
560 | struct moschip_port *mcs = (struct moschip_port *) arg; | |
561 | ||
562 | /* Turn off LED */ | |
563 | mos7840_set_led_async(mcs, 0x0300, MODEM_CONTROL_REGISTER); | |
564 | mod_timer(&mcs->led_timer2, | |
565 | jiffies + msecs_to_jiffies(LED_OFF_MS)); | |
566 | } | |
567 | ||
568 | static void mos7840_led_flag_off(unsigned long arg) | |
569 | { | |
570 | struct moschip_port *mcs = (struct moschip_port *) arg; | |
571 | ||
572 | mcs->led_flag = false; | |
573 | } | |
574 | ||
3f542974 PS |
575 | /***************************************************************************** |
576 | * mos7840_interrupt_callback | |
577 | * this is the callback function for when we have received data on the | |
578 | * interrupt endpoint. | |
579 | *****************************************************************************/ | |
580 | ||
7d12e780 | 581 | static void mos7840_interrupt_callback(struct urb *urb) |
3f542974 PS |
582 | { |
583 | int result; | |
584 | int length; | |
585 | struct moschip_port *mos7840_port; | |
586 | struct usb_serial *serial; | |
587 | __u16 Data; | |
588 | unsigned char *data; | |
589 | __u8 sp[5], st; | |
0de9a702 ON |
590 | int i, rv = 0; |
591 | __u16 wval, wreg = 0; | |
0643c724 | 592 | int status = urb->status; |
3f542974 | 593 | |
0643c724 | 594 | switch (status) { |
3f542974 PS |
595 | case 0: |
596 | /* success */ | |
597 | break; | |
598 | case -ECONNRESET: | |
599 | case -ENOENT: | |
600 | case -ESHUTDOWN: | |
601 | /* this urb is terminated, clean up */ | |
9c134a14 GKH |
602 | dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", |
603 | __func__, status); | |
3f542974 PS |
604 | return; |
605 | default: | |
9c134a14 GKH |
606 | dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n", |
607 | __func__, status); | |
3f542974 PS |
608 | goto exit; |
609 | } | |
610 | ||
611 | length = urb->actual_length; | |
612 | data = urb->transfer_buffer; | |
613 | ||
cdc97792 | 614 | serial = urb->context; |
3f542974 PS |
615 | |
616 | /* Moschip get 5 bytes | |
617 | * Byte 1 IIR Port 1 (port.number is 0) | |
618 | * Byte 2 IIR Port 2 (port.number is 1) | |
619 | * Byte 3 IIR Port 3 (port.number is 2) | |
620 | * Byte 4 IIR Port 4 (port.number is 3) | |
621 | * Byte 5 FIFO status for both */ | |
622 | ||
623 | if (length && length > 5) { | |
9c134a14 | 624 | dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n"); |
3f542974 PS |
625 | return; |
626 | } | |
627 | ||
628 | sp[0] = (__u8) data[0]; | |
629 | sp[1] = (__u8) data[1]; | |
630 | sp[2] = (__u8) data[2]; | |
631 | sp[3] = (__u8) data[3]; | |
632 | st = (__u8) data[4]; | |
633 | ||
634 | for (i = 0; i < serial->num_ports; i++) { | |
635 | mos7840_port = mos7840_get_port_private(serial->port[i]); | |
636 | wval = | |
637 | (((__u16) serial->port[i]->number - | |
638 | (__u16) (serial->minor)) + 1) << 8; | |
639 | if (mos7840_port->open) { | |
640 | if (sp[i] & 0x01) { | |
9c134a14 | 641 | dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i); |
3f542974 PS |
642 | } else { |
643 | switch (sp[i] & 0x0f) { | |
644 | case SERIAL_IIR_RLS: | |
9c134a14 GKH |
645 | dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i); |
646 | dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n"); | |
3f542974 | 647 | mos7840_port->MsrLsr = 1; |
0de9a702 | 648 | wreg = LINE_STATUS_REGISTER; |
3f542974 PS |
649 | break; |
650 | case SERIAL_IIR_MS: | |
9c134a14 | 651 | dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i); |
3f542974 | 652 | mos7840_port->MsrLsr = 0; |
0de9a702 | 653 | wreg = MODEM_STATUS_REGISTER; |
3f542974 PS |
654 | break; |
655 | } | |
e681b66f | 656 | rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); |
3f542974 PS |
657 | } |
658 | } | |
659 | } | |
880af9db AC |
660 | if (!(rv < 0)) |
661 | /* the completion handler for the control urb will resubmit */ | |
0de9a702 ON |
662 | return; |
663 | exit: | |
3f542974 PS |
664 | result = usb_submit_urb(urb, GFP_ATOMIC); |
665 | if (result) { | |
666 | dev_err(&urb->dev->dev, | |
667 | "%s - Error %d submitting interrupt urb\n", | |
441b62c1 | 668 | __func__, result); |
3f542974 | 669 | } |
3f542974 PS |
670 | } |
671 | ||
672 | static int mos7840_port_paranoia_check(struct usb_serial_port *port, | |
673 | const char *function) | |
674 | { | |
675 | if (!port) { | |
9c134a14 | 676 | pr_debug("%s - port == NULL\n", function); |
3f542974 PS |
677 | return -1; |
678 | } | |
679 | if (!port->serial) { | |
9c134a14 | 680 | pr_debug("%s - port->serial == NULL\n", function); |
3f542974 PS |
681 | return -1; |
682 | } | |
683 | ||
684 | return 0; | |
685 | } | |
686 | ||
687 | /* Inline functions to check the sanity of a pointer that is passed to us */ | |
688 | static int mos7840_serial_paranoia_check(struct usb_serial *serial, | |
689 | const char *function) | |
690 | { | |
691 | if (!serial) { | |
9c134a14 | 692 | pr_debug("%s - serial == NULL\n", function); |
3f542974 PS |
693 | return -1; |
694 | } | |
695 | if (!serial->type) { | |
9c134a14 | 696 | pr_debug("%s - serial->type == NULL!\n", function); |
3f542974 PS |
697 | return -1; |
698 | } | |
699 | ||
700 | return 0; | |
701 | } | |
702 | ||
703 | static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, | |
704 | const char *function) | |
705 | { | |
706 | /* if no port was specified, or it fails a paranoia check */ | |
707 | if (!port || | |
708 | mos7840_port_paranoia_check(port, function) || | |
709 | mos7840_serial_paranoia_check(port->serial, function)) { | |
880af9db AC |
710 | /* then say that we don't have a valid usb_serial thing, |
711 | * which will end up genrating -ENODEV return values */ | |
3f542974 PS |
712 | return NULL; |
713 | } | |
714 | ||
715 | return port->serial; | |
716 | } | |
717 | ||
718 | /***************************************************************************** | |
719 | * mos7840_bulk_in_callback | |
720 | * this is the callback function for when we have received data on the | |
721 | * bulk in endpoint. | |
722 | *****************************************************************************/ | |
723 | ||
7d12e780 | 724 | static void mos7840_bulk_in_callback(struct urb *urb) |
3f542974 | 725 | { |
0643c724 | 726 | int retval; |
3f542974 PS |
727 | unsigned char *data; |
728 | struct usb_serial *serial; | |
729 | struct usb_serial_port *port; | |
730 | struct moschip_port *mos7840_port; | |
0643c724 | 731 | int status = urb->status; |
3f542974 | 732 | |
cdc97792 | 733 | mos7840_port = urb->context; |
9c134a14 | 734 | if (!mos7840_port) |
50de36f7 | 735 | return; |
50de36f7 GKH |
736 | |
737 | if (status) { | |
9c134a14 | 738 | dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status); |
50de36f7 | 739 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
740 | return; |
741 | } | |
742 | ||
9c134a14 | 743 | port = mos7840_port->port; |
441b62c1 | 744 | if (mos7840_port_paranoia_check(port, __func__)) { |
50de36f7 | 745 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
746 | return; |
747 | } | |
748 | ||
441b62c1 | 749 | serial = mos7840_get_usb_serial(port, __func__); |
3f542974 | 750 | if (!serial) { |
50de36f7 | 751 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
752 | return; |
753 | } | |
754 | ||
3f542974 | 755 | data = urb->transfer_buffer; |
59d33f2f | 756 | usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); |
3f542974 | 757 | |
3f542974 | 758 | if (urb->actual_length) { |
05c7cd39 | 759 | struct tty_port *tport = &mos7840_port->port->port; |
2e124b4a JS |
760 | tty_insert_flip_string(tport, data, urb->actual_length); |
761 | tty_flip_buffer_push(tport); | |
8c1a07ff JH |
762 | port->icount.rx += urb->actual_length; |
763 | dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx); | |
3f542974 PS |
764 | } |
765 | ||
766 | if (!mos7840_port->read_urb) { | |
9c134a14 | 767 | dev_dbg(&port->dev, "%s", "URB KILLED !!!\n"); |
50de36f7 | 768 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
769 | return; |
770 | } | |
771 | ||
0eafe4de D |
772 | /* Turn on LED */ |
773 | if (mos7840_port->has_led && !mos7840_port->led_flag) { | |
774 | mos7840_port->led_flag = true; | |
775 | mos7840_set_led_async(mos7840_port, 0x0301, | |
776 | MODEM_CONTROL_REGISTER); | |
777 | mod_timer(&mos7840_port->led_timer1, | |
778 | jiffies + msecs_to_jiffies(LED_ON_MS)); | |
779 | } | |
3f542974 | 780 | |
50de36f7 | 781 | mos7840_port->read_urb_busy = true; |
0643c724 | 782 | retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
0de9a702 | 783 | |
0643c724 | 784 | if (retval) { |
9c134a14 | 785 | dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval); |
50de36f7 | 786 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
787 | } |
788 | } | |
789 | ||
790 | /***************************************************************************** | |
791 | * mos7840_bulk_out_data_callback | |
880af9db AC |
792 | * this is the callback function for when we have finished sending |
793 | * serial data on the bulk out endpoint. | |
3f542974 PS |
794 | *****************************************************************************/ |
795 | ||
7d12e780 | 796 | static void mos7840_bulk_out_data_callback(struct urb *urb) |
3f542974 PS |
797 | { |
798 | struct moschip_port *mos7840_port; | |
9c134a14 | 799 | struct usb_serial_port *port; |
3f542974 | 800 | struct tty_struct *tty; |
0643c724 | 801 | int status = urb->status; |
0de9a702 ON |
802 | int i; |
803 | ||
cdc97792 | 804 | mos7840_port = urb->context; |
9c134a14 | 805 | port = mos7840_port->port; |
0de9a702 ON |
806 | spin_lock(&mos7840_port->pool_lock); |
807 | for (i = 0; i < NUM_URBS; i++) { | |
808 | if (urb == mos7840_port->write_urb_pool[i]) { | |
809 | mos7840_port->busy[i] = 0; | |
810 | break; | |
811 | } | |
812 | } | |
813 | spin_unlock(&mos7840_port->pool_lock); | |
814 | ||
0643c724 | 815 | if (status) { |
9c134a14 | 816 | dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status); |
3f542974 PS |
817 | return; |
818 | } | |
819 | ||
9c134a14 | 820 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 821 | return; |
3f542974 | 822 | |
9c134a14 | 823 | tty = tty_port_tty_get(&port->port); |
b963a844 JS |
824 | if (tty && mos7840_port->open) |
825 | tty_wakeup(tty); | |
4a90f09b | 826 | tty_kref_put(tty); |
3f542974 PS |
827 | |
828 | } | |
829 | ||
830 | /************************************************************************/ | |
831 | /* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */ | |
832 | /************************************************************************/ | |
833 | #ifdef MCSSerialProbe | |
834 | static int mos7840_serial_probe(struct usb_serial *serial, | |
835 | const struct usb_device_id *id) | |
836 | { | |
837 | ||
838 | /*need to implement the mode_reg reading and updating\ | |
839 | structures usb_serial_ device_type\ | |
840 | (i.e num_ports, num_bulkin,bulkout etc) */ | |
841 | /* Also we can update the changes attach */ | |
842 | return 1; | |
843 | } | |
844 | #endif | |
845 | ||
846 | /***************************************************************************** | |
847 | * mos7840_open | |
848 | * this function is called by the tty driver when a port is opened | |
849 | * If successful, we return 0 | |
850 | * Otherwise we return a negative error number. | |
851 | *****************************************************************************/ | |
852 | ||
a509a7e4 | 853 | static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port) |
3f542974 PS |
854 | { |
855 | int response; | |
856 | int j; | |
857 | struct usb_serial *serial; | |
858 | struct urb *urb; | |
859 | __u16 Data; | |
860 | int status; | |
861 | struct moschip_port *mos7840_port; | |
0de9a702 | 862 | struct moschip_port *port0; |
3f542974 | 863 | |
9c134a14 | 864 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 865 | return -ENODEV; |
3f542974 | 866 | |
3f542974 PS |
867 | serial = port->serial; |
868 | ||
9c134a14 | 869 | if (mos7840_serial_paranoia_check(serial, __func__)) |
3f542974 | 870 | return -ENODEV; |
3f542974 PS |
871 | |
872 | mos7840_port = mos7840_get_port_private(port); | |
0de9a702 | 873 | port0 = mos7840_get_port_private(serial->port[0]); |
3f542974 | 874 | |
0de9a702 | 875 | if (mos7840_port == NULL || port0 == NULL) |
3f542974 PS |
876 | return -ENODEV; |
877 | ||
878 | usb_clear_halt(serial->dev, port->write_urb->pipe); | |
879 | usb_clear_halt(serial->dev, port->read_urb->pipe); | |
0de9a702 | 880 | port0->open_ports++; |
3f542974 PS |
881 | |
882 | /* Initialising the write urb pool */ | |
883 | for (j = 0; j < NUM_URBS; ++j) { | |
0de9a702 | 884 | urb = usb_alloc_urb(0, GFP_KERNEL); |
3f542974 PS |
885 | mos7840_port->write_urb_pool[j] = urb; |
886 | ||
887 | if (urb == NULL) { | |
194343d9 | 888 | dev_err(&port->dev, "No more urbs???\n"); |
3f542974 PS |
889 | continue; |
890 | } | |
891 | ||
880af9db AC |
892 | urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, |
893 | GFP_KERNEL); | |
3f542974 | 894 | if (!urb->transfer_buffer) { |
0de9a702 ON |
895 | usb_free_urb(urb); |
896 | mos7840_port->write_urb_pool[j] = NULL; | |
194343d9 GKH |
897 | dev_err(&port->dev, |
898 | "%s-out of memory for urb buffers.\n", | |
899 | __func__); | |
3f542974 PS |
900 | continue; |
901 | } | |
902 | } | |
903 | ||
904 | /***************************************************************************** | |
905 | * Initialize MCS7840 -- Write Init values to corresponding Registers | |
906 | * | |
907 | * Register Index | |
908 | * 1 : IER | |
909 | * 2 : FCR | |
910 | * 3 : LCR | |
911 | * 4 : MCR | |
912 | * | |
913 | * 0x08 : SP1/2 Control Reg | |
914 | *****************************************************************************/ | |
915 | ||
880af9db | 916 | /* NEED to check the following Block */ |
3f542974 | 917 | |
3f542974 PS |
918 | Data = 0x0; |
919 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); | |
920 | if (status < 0) { | |
9c134a14 | 921 | dev_dbg(&port->dev, "Reading Spreg failed\n"); |
3f542974 PS |
922 | return -1; |
923 | } | |
924 | Data |= 0x80; | |
925 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
926 | if (status < 0) { | |
9c134a14 | 927 | dev_dbg(&port->dev, "writing Spreg failed\n"); |
3f542974 PS |
928 | return -1; |
929 | } | |
930 | ||
931 | Data &= ~0x80; | |
932 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); | |
933 | if (status < 0) { | |
9c134a14 | 934 | dev_dbg(&port->dev, "writing Spreg failed\n"); |
3f542974 PS |
935 | return -1; |
936 | } | |
880af9db | 937 | /* End of block to be checked */ |
3f542974 | 938 | |
3f542974 | 939 | Data = 0x0; |
880af9db AC |
940 | status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, |
941 | &Data); | |
3f542974 | 942 | if (status < 0) { |
9c134a14 | 943 | dev_dbg(&port->dev, "Reading Controlreg failed\n"); |
3f542974 PS |
944 | return -1; |
945 | } | |
880af9db AC |
946 | Data |= 0x08; /* Driver done bit */ |
947 | Data |= 0x20; /* rx_disable */ | |
948 | status = mos7840_set_reg_sync(port, | |
949 | mos7840_port->ControlRegOffset, Data); | |
3f542974 | 950 | if (status < 0) { |
9c134a14 | 951 | dev_dbg(&port->dev, "writing Controlreg failed\n"); |
3f542974 PS |
952 | return -1; |
953 | } | |
880af9db AC |
954 | /* do register settings here */ |
955 | /* Set all regs to the device default values. */ | |
956 | /*********************************** | |
957 | * First Disable all interrupts. | |
958 | ***********************************/ | |
3f542974 | 959 | Data = 0x00; |
3f542974 PS |
960 | status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); |
961 | if (status < 0) { | |
9c134a14 | 962 | dev_dbg(&port->dev, "disabling interrupts failed\n"); |
3f542974 PS |
963 | return -1; |
964 | } | |
880af9db | 965 | /* Set FIFO_CONTROL_REGISTER to the default value */ |
3f542974 | 966 | Data = 0x00; |
3f542974 PS |
967 | status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); |
968 | if (status < 0) { | |
9c134a14 | 969 | dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); |
3f542974 PS |
970 | return -1; |
971 | } | |
972 | ||
973 | Data = 0xcf; | |
3f542974 PS |
974 | status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); |
975 | if (status < 0) { | |
9c134a14 | 976 | dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); |
3f542974 PS |
977 | return -1; |
978 | } | |
979 | ||
980 | Data = 0x03; | |
3f542974 PS |
981 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
982 | mos7840_port->shadowLCR = Data; | |
983 | ||
984 | Data = 0x0b; | |
3f542974 PS |
985 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); |
986 | mos7840_port->shadowMCR = Data; | |
987 | ||
988 | Data = 0x00; | |
3f542974 PS |
989 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
990 | mos7840_port->shadowLCR = Data; | |
991 | ||
880af9db | 992 | Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ |
3f542974 PS |
993 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
994 | ||
995 | Data = 0x0c; | |
3f542974 PS |
996 | status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); |
997 | ||
998 | Data = 0x0; | |
3f542974 PS |
999 | status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); |
1000 | ||
1001 | Data = 0x00; | |
3f542974 PS |
1002 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
1003 | ||
1004 | Data = Data & ~SERIAL_LCR_DLAB; | |
3f542974 PS |
1005 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
1006 | mos7840_port->shadowLCR = Data; | |
1007 | ||
880af9db | 1008 | /* clearing Bulkin and Bulkout Fifo */ |
3f542974 | 1009 | Data = 0x0; |
3f542974 PS |
1010 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); |
1011 | ||
1012 | Data = Data | 0x0c; | |
3f542974 PS |
1013 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); |
1014 | ||
1015 | Data = Data & ~0x0c; | |
3f542974 | 1016 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); |
880af9db | 1017 | /* Finally enable all interrupts */ |
3f542974 | 1018 | Data = 0x0c; |
3f542974 PS |
1019 | status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); |
1020 | ||
880af9db | 1021 | /* clearing rx_disable */ |
3f542974 | 1022 | Data = 0x0; |
880af9db AC |
1023 | status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, |
1024 | &Data); | |
3f542974 | 1025 | Data = Data & ~0x20; |
880af9db AC |
1026 | status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, |
1027 | Data); | |
3f542974 | 1028 | |
880af9db | 1029 | /* rx_negate */ |
3f542974 | 1030 | Data = 0x0; |
880af9db AC |
1031 | status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset, |
1032 | &Data); | |
3f542974 | 1033 | Data = Data | 0x10; |
880af9db AC |
1034 | status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, |
1035 | Data); | |
3f542974 | 1036 | |
880af9db AC |
1037 | /* Check to see if we've set up our endpoint info yet * |
1038 | * (can't set it up in mos7840_startup as the structures * | |
1039 | * were not set up at that time.) */ | |
0de9a702 | 1040 | if (port0->open_ports == 1) { |
3f542974 | 1041 | if (serial->port[0]->interrupt_in_buffer == NULL) { |
3f542974 | 1042 | /* set up interrupt urb */ |
3f542974 | 1043 | usb_fill_int_urb(serial->port[0]->interrupt_in_urb, |
880af9db AC |
1044 | serial->dev, |
1045 | usb_rcvintpipe(serial->dev, | |
1046 | serial->port[0]->interrupt_in_endpointAddress), | |
1047 | serial->port[0]->interrupt_in_buffer, | |
1048 | serial->port[0]->interrupt_in_urb-> | |
1049 | transfer_buffer_length, | |
1050 | mos7840_interrupt_callback, | |
1051 | serial, | |
1052 | serial->port[0]->interrupt_in_urb->interval); | |
3f542974 PS |
1053 | |
1054 | /* start interrupt read for mos7840 * | |
1055 | * will continue as long as mos7840 is connected */ | |
1056 | ||
1057 | response = | |
1058 | usb_submit_urb(serial->port[0]->interrupt_in_urb, | |
1059 | GFP_KERNEL); | |
1060 | if (response) { | |
194343d9 GKH |
1061 | dev_err(&port->dev, "%s - Error %d submitting " |
1062 | "interrupt urb\n", __func__, response); | |
3f542974 PS |
1063 | } |
1064 | ||
1065 | } | |
1066 | ||
1067 | } | |
1068 | ||
1069 | /* see if we've set up our endpoint info yet * | |
1070 | * (can't set it up in mos7840_startup as the * | |
1071 | * structures were not set up at that time.) */ | |
1072 | ||
9c134a14 GKH |
1073 | dev_dbg(&port->dev, "port number is %d\n", port->number); |
1074 | dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor); | |
1075 | dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress); | |
1076 | dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress); | |
1077 | dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress); | |
1078 | dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num); | |
3f542974 PS |
1079 | mos7840_port->read_urb = port->read_urb; |
1080 | ||
1081 | /* set up our bulk in urb */ | |
093ea2d3 DL |
1082 | if ((serial->num_ports == 2) |
1083 | && ((((__u16)port->number - | |
1084 | (__u16)(port->serial->minor)) % 2) != 0)) { | |
1085 | usb_fill_bulk_urb(mos7840_port->read_urb, | |
1086 | serial->dev, | |
1087 | usb_rcvbulkpipe(serial->dev, | |
1088 | (port->bulk_in_endpointAddress) + 2), | |
1089 | port->bulk_in_buffer, | |
1090 | mos7840_port->read_urb->transfer_buffer_length, | |
1091 | mos7840_bulk_in_callback, mos7840_port); | |
1092 | } else { | |
1093 | usb_fill_bulk_urb(mos7840_port->read_urb, | |
1094 | serial->dev, | |
1095 | usb_rcvbulkpipe(serial->dev, | |
1096 | port->bulk_in_endpointAddress), | |
1097 | port->bulk_in_buffer, | |
1098 | mos7840_port->read_urb->transfer_buffer_length, | |
1099 | mos7840_bulk_in_callback, mos7840_port); | |
1100 | } | |
3f542974 | 1101 | |
9c134a14 | 1102 | dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress); |
50de36f7 | 1103 | mos7840_port->read_urb_busy = true; |
3f542974 PS |
1104 | response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL); |
1105 | if (response) { | |
194343d9 GKH |
1106 | dev_err(&port->dev, "%s - Error %d submitting control urb\n", |
1107 | __func__, response); | |
50de36f7 | 1108 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
1109 | } |
1110 | ||
1111 | /* initialize our wait queues */ | |
1112 | init_waitqueue_head(&mos7840_port->wait_chase); | |
3f542974 | 1113 | |
3f542974 | 1114 | /* initialize our port settings */ |
880af9db AC |
1115 | /* Must set to enable ints! */ |
1116 | mos7840_port->shadowMCR = MCR_MASTER_IE; | |
3f542974 PS |
1117 | /* send a open port command */ |
1118 | mos7840_port->open = 1; | |
880af9db | 1119 | /* mos7840_change_port_settings(mos7840_port,old_termios); */ |
3f542974 | 1120 | |
3f542974 | 1121 | return 0; |
3f542974 PS |
1122 | } |
1123 | ||
1124 | /***************************************************************************** | |
1125 | * mos7840_chars_in_buffer | |
1126 | * this function is called by the tty driver when it wants to know how many | |
1127 | * bytes of data we currently have outstanding in the port (data that has | |
1128 | * been written, but hasn't made it out the port yet) | |
1129 | * If successful, we return the number of bytes left to be written in the | |
1130 | * system, | |
95da310e | 1131 | * Otherwise we return zero. |
3f542974 PS |
1132 | *****************************************************************************/ |
1133 | ||
95da310e | 1134 | static int mos7840_chars_in_buffer(struct tty_struct *tty) |
3f542974 | 1135 | { |
95da310e | 1136 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1137 | int i; |
1138 | int chars = 0; | |
0de9a702 | 1139 | unsigned long flags; |
3f542974 PS |
1140 | struct moschip_port *mos7840_port; |
1141 | ||
9c134a14 | 1142 | if (mos7840_port_paranoia_check(port, __func__)) |
95da310e | 1143 | return 0; |
3f542974 PS |
1144 | |
1145 | mos7840_port = mos7840_get_port_private(port); | |
3363155b | 1146 | if (mos7840_port == NULL) |
95da310e | 1147 | return 0; |
3f542974 | 1148 | |
880af9db | 1149 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
5c263b92 MF |
1150 | for (i = 0; i < NUM_URBS; ++i) { |
1151 | if (mos7840_port->busy[i]) { | |
1152 | struct urb *urb = mos7840_port->write_urb_pool[i]; | |
1153 | chars += urb->transfer_buffer_length; | |
1154 | } | |
1155 | } | |
880af9db | 1156 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
9c134a14 | 1157 | dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); |
0de9a702 | 1158 | return chars; |
3f542974 PS |
1159 | |
1160 | } | |
1161 | ||
3f542974 PS |
1162 | /***************************************************************************** |
1163 | * mos7840_close | |
1164 | * this function is called by the tty driver when a port is closed | |
1165 | *****************************************************************************/ | |
1166 | ||
335f8514 | 1167 | static void mos7840_close(struct usb_serial_port *port) |
3f542974 PS |
1168 | { |
1169 | struct usb_serial *serial; | |
1170 | struct moschip_port *mos7840_port; | |
0de9a702 | 1171 | struct moschip_port *port0; |
3f542974 PS |
1172 | int j; |
1173 | __u16 Data; | |
1174 | ||
9c134a14 | 1175 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1176 | return; |
3f542974 | 1177 | |
441b62c1 | 1178 | serial = mos7840_get_usb_serial(port, __func__); |
9c134a14 | 1179 | if (!serial) |
3f542974 | 1180 | return; |
3f542974 PS |
1181 | |
1182 | mos7840_port = mos7840_get_port_private(port); | |
0de9a702 | 1183 | port0 = mos7840_get_port_private(serial->port[0]); |
3f542974 | 1184 | |
0de9a702 | 1185 | if (mos7840_port == NULL || port0 == NULL) |
3f542974 | 1186 | return; |
3f542974 PS |
1187 | |
1188 | for (j = 0; j < NUM_URBS; ++j) | |
1189 | usb_kill_urb(mos7840_port->write_urb_pool[j]); | |
1190 | ||
1191 | /* Freeing Write URBs */ | |
1192 | for (j = 0; j < NUM_URBS; ++j) { | |
1193 | if (mos7840_port->write_urb_pool[j]) { | |
1194 | if (mos7840_port->write_urb_pool[j]->transfer_buffer) | |
1195 | kfree(mos7840_port->write_urb_pool[j]-> | |
1196 | transfer_buffer); | |
1197 | ||
1198 | usb_free_urb(mos7840_port->write_urb_pool[j]); | |
1199 | } | |
1200 | } | |
1201 | ||
bb3529c6 JH |
1202 | usb_kill_urb(mos7840_port->write_urb); |
1203 | usb_kill_urb(mos7840_port->read_urb); | |
1204 | mos7840_port->read_urb_busy = false; | |
1205 | ||
0de9a702 | 1206 | port0->open_ports--; |
9c134a14 | 1207 | dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number); |
0de9a702 | 1208 | if (port0->open_ports == 0) { |
3f542974 | 1209 | if (serial->port[0]->interrupt_in_urb) { |
9c134a14 | 1210 | dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n"); |
0de9a702 | 1211 | usb_kill_urb(serial->port[0]->interrupt_in_urb); |
3f542974 PS |
1212 | } |
1213 | } | |
1214 | ||
1215 | if (mos7840_port->write_urb) { | |
1216 | /* if this urb had a transfer buffer already (old tx) free it */ | |
ae8d4879 | 1217 | kfree(mos7840_port->write_urb->transfer_buffer); |
3f542974 PS |
1218 | usb_free_urb(mos7840_port->write_urb); |
1219 | } | |
1220 | ||
1221 | Data = 0x0; | |
1222 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1223 | ||
1224 | Data = 0x00; | |
1225 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
1226 | ||
1227 | mos7840_port->open = 0; | |
3f542974 PS |
1228 | } |
1229 | ||
1230 | /************************************************************************ | |
1231 | * | |
1232 | * mos7840_block_until_chase_response | |
1233 | * | |
1234 | * This function will block the close until one of the following: | |
1235 | * 1. Response to our Chase comes from mos7840 | |
dc0d5c1e | 1236 | * 2. A timeout of 10 seconds without activity has expired |
3f542974 PS |
1237 | * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty) |
1238 | * | |
1239 | ************************************************************************/ | |
1240 | ||
95da310e AC |
1241 | static void mos7840_block_until_chase_response(struct tty_struct *tty, |
1242 | struct moschip_port *mos7840_port) | |
3f542974 | 1243 | { |
1e658489 | 1244 | int timeout = msecs_to_jiffies(1000); |
3f542974 PS |
1245 | int wait = 10; |
1246 | int count; | |
1247 | ||
1248 | while (1) { | |
95da310e | 1249 | count = mos7840_chars_in_buffer(tty); |
3f542974 PS |
1250 | |
1251 | /* Check for Buffer status */ | |
880af9db | 1252 | if (count <= 0) |
3f542974 | 1253 | return; |
3f542974 PS |
1254 | |
1255 | /* Block the thread for a while */ | |
1256 | interruptible_sleep_on_timeout(&mos7840_port->wait_chase, | |
1257 | timeout); | |
1258 | /* No activity.. count down section */ | |
1259 | wait--; | |
1260 | if (wait == 0) { | |
9c134a14 | 1261 | dev_dbg(&mos7840_port->port->dev, "%s - TIMEOUT\n", __func__); |
3f542974 PS |
1262 | return; |
1263 | } else { | |
dc0d5c1e | 1264 | /* Reset timeout value back to seconds */ |
3f542974 PS |
1265 | wait = 10; |
1266 | } | |
1267 | } | |
1268 | ||
1269 | } | |
1270 | ||
1271 | /***************************************************************************** | |
1272 | * mos7840_break | |
1273 | * this function sends a break to the port | |
1274 | *****************************************************************************/ | |
95da310e | 1275 | static void mos7840_break(struct tty_struct *tty, int break_state) |
3f542974 | 1276 | { |
95da310e | 1277 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1278 | unsigned char data; |
1279 | struct usb_serial *serial; | |
1280 | struct moschip_port *mos7840_port; | |
1281 | ||
9c134a14 | 1282 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1283 | return; |
3f542974 | 1284 | |
441b62c1 | 1285 | serial = mos7840_get_usb_serial(port, __func__); |
9c134a14 | 1286 | if (!serial) |
3f542974 | 1287 | return; |
3f542974 PS |
1288 | |
1289 | mos7840_port = mos7840_get_port_private(port); | |
1290 | ||
880af9db | 1291 | if (mos7840_port == NULL) |
3f542974 | 1292 | return; |
3f542974 | 1293 | |
bb3529c6 JH |
1294 | /* flush and block until tx is empty */ |
1295 | mos7840_block_until_chase_response(tty, mos7840_port); | |
3f542974 | 1296 | |
95da310e | 1297 | if (break_state == -1) |
3f542974 | 1298 | data = mos7840_port->shadowLCR | LCR_SET_BREAK; |
95da310e | 1299 | else |
3f542974 | 1300 | data = mos7840_port->shadowLCR & ~LCR_SET_BREAK; |
3f542974 | 1301 | |
6b447f04 | 1302 | /* FIXME: no locking on shadowLCR anywhere in driver */ |
3f542974 | 1303 | mos7840_port->shadowLCR = data; |
9c134a14 | 1304 | dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); |
3f542974 PS |
1305 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, |
1306 | mos7840_port->shadowLCR); | |
3f542974 PS |
1307 | } |
1308 | ||
1309 | /***************************************************************************** | |
1310 | * mos7840_write_room | |
1311 | * this function is called by the tty driver when it wants to know how many | |
1312 | * bytes of data we can accept for a specific port. | |
1313 | * If successful, we return the amount of room that we have for this port | |
1314 | * Otherwise we return a negative error number. | |
1315 | *****************************************************************************/ | |
1316 | ||
95da310e | 1317 | static int mos7840_write_room(struct tty_struct *tty) |
3f542974 | 1318 | { |
95da310e | 1319 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1320 | int i; |
1321 | int room = 0; | |
0de9a702 | 1322 | unsigned long flags; |
3f542974 PS |
1323 | struct moschip_port *mos7840_port; |
1324 | ||
9c134a14 | 1325 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1326 | return -1; |
3f542974 PS |
1327 | |
1328 | mos7840_port = mos7840_get_port_private(port); | |
9c134a14 | 1329 | if (mos7840_port == NULL) |
3f542974 | 1330 | return -1; |
3f542974 | 1331 | |
0de9a702 | 1332 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
3f542974 | 1333 | for (i = 0; i < NUM_URBS; ++i) { |
880af9db | 1334 | if (!mos7840_port->busy[i]) |
3f542974 | 1335 | room += URB_TRANSFER_BUFFER_SIZE; |
3f542974 | 1336 | } |
0de9a702 | 1337 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
3f542974 | 1338 | |
0de9a702 | 1339 | room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; |
9c134a14 | 1340 | dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room); |
0de9a702 | 1341 | return room; |
3f542974 PS |
1342 | |
1343 | } | |
1344 | ||
1345 | /***************************************************************************** | |
1346 | * mos7840_write | |
1347 | * this function is called by the tty driver when data should be written to | |
1348 | * the port. | |
1349 | * If successful, we return the number of bytes written, otherwise we | |
1350 | * return a negative error number. | |
1351 | *****************************************************************************/ | |
1352 | ||
95da310e | 1353 | static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port, |
3f542974 PS |
1354 | const unsigned char *data, int count) |
1355 | { | |
1356 | int status; | |
1357 | int i; | |
1358 | int bytes_sent = 0; | |
1359 | int transfer_size; | |
0de9a702 | 1360 | unsigned long flags; |
3f542974 PS |
1361 | |
1362 | struct moschip_port *mos7840_port; | |
1363 | struct usb_serial *serial; | |
1364 | struct urb *urb; | |
880af9db | 1365 | /* __u16 Data; */ |
3f542974 PS |
1366 | const unsigned char *current_position = data; |
1367 | unsigned char *data1; | |
3f542974 PS |
1368 | |
1369 | #ifdef NOTMOS7840 | |
1370 | Data = 0x00; | |
3f542974 PS |
1371 | status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); |
1372 | mos7840_port->shadowLCR = Data; | |
9c134a14 GKH |
1373 | dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data); |
1374 | dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); | |
3f542974 | 1375 | |
880af9db AC |
1376 | /* Data = 0x03; */ |
1377 | /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */ | |
1378 | /* mos7840_port->shadowLCR=Data;//Need to add later */ | |
3f542974 | 1379 | |
880af9db | 1380 | Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */ |
3f542974 PS |
1381 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
1382 | ||
880af9db AC |
1383 | /* Data = 0x0c; */ |
1384 | /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */ | |
3f542974 | 1385 | Data = 0x00; |
3f542974 | 1386 | status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data); |
9c134a14 | 1387 | dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data); |
3f542974 PS |
1388 | |
1389 | Data = 0x0; | |
3f542974 | 1390 | status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data); |
9c134a14 | 1391 | dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data); |
3f542974 PS |
1392 | |
1393 | Data = Data & ~SERIAL_LCR_DLAB; | |
9c134a14 | 1394 | dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR); |
3f542974 PS |
1395 | status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); |
1396 | #endif | |
1397 | ||
9c134a14 | 1398 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1399 | return -1; |
3f542974 PS |
1400 | |
1401 | serial = port->serial; | |
9c134a14 | 1402 | if (mos7840_serial_paranoia_check(serial, __func__)) |
3f542974 | 1403 | return -1; |
3f542974 PS |
1404 | |
1405 | mos7840_port = mos7840_get_port_private(port); | |
9c134a14 | 1406 | if (mos7840_port == NULL) |
3f542974 | 1407 | return -1; |
3f542974 PS |
1408 | |
1409 | /* try to find a free urb in the list */ | |
1410 | urb = NULL; | |
1411 | ||
0de9a702 | 1412 | spin_lock_irqsave(&mos7840_port->pool_lock, flags); |
3f542974 | 1413 | for (i = 0; i < NUM_URBS; ++i) { |
0de9a702 ON |
1414 | if (!mos7840_port->busy[i]) { |
1415 | mos7840_port->busy[i] = 1; | |
3f542974 | 1416 | urb = mos7840_port->write_urb_pool[i]; |
9c134a14 | 1417 | dev_dbg(&port->dev, "URB:%d\n", i); |
3f542974 PS |
1418 | break; |
1419 | } | |
1420 | } | |
0de9a702 | 1421 | spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); |
3f542974 PS |
1422 | |
1423 | if (urb == NULL) { | |
9c134a14 | 1424 | dev_dbg(&port->dev, "%s - no more free urbs\n", __func__); |
3f542974 PS |
1425 | goto exit; |
1426 | } | |
1427 | ||
1428 | if (urb->transfer_buffer == NULL) { | |
1429 | urb->transfer_buffer = | |
1430 | kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); | |
1431 | ||
1432 | if (urb->transfer_buffer == NULL) { | |
22a416c4 | 1433 | dev_err_console(port, "%s no more kernel memory...\n", |
194343d9 | 1434 | __func__); |
3f542974 PS |
1435 | goto exit; |
1436 | } | |
1437 | } | |
1438 | transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); | |
1439 | ||
97c4965d | 1440 | memcpy(urb->transfer_buffer, current_position, transfer_size); |
3f542974 PS |
1441 | |
1442 | /* fill urb with data and submit */ | |
093ea2d3 DL |
1443 | if ((serial->num_ports == 2) |
1444 | && ((((__u16)port->number - | |
1445 | (__u16)(port->serial->minor)) % 2) != 0)) { | |
1446 | usb_fill_bulk_urb(urb, | |
1447 | serial->dev, | |
1448 | usb_sndbulkpipe(serial->dev, | |
1449 | (port->bulk_out_endpointAddress) + 2), | |
1450 | urb->transfer_buffer, | |
1451 | transfer_size, | |
1452 | mos7840_bulk_out_data_callback, mos7840_port); | |
1453 | } else { | |
1454 | usb_fill_bulk_urb(urb, | |
1455 | serial->dev, | |
1456 | usb_sndbulkpipe(serial->dev, | |
1457 | port->bulk_out_endpointAddress), | |
1458 | urb->transfer_buffer, | |
1459 | transfer_size, | |
1460 | mos7840_bulk_out_data_callback, mos7840_port); | |
1461 | } | |
3f542974 PS |
1462 | |
1463 | data1 = urb->transfer_buffer; | |
9c134a14 | 1464 | dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress); |
3f542974 | 1465 | |
0eafe4de D |
1466 | /* Turn on LED */ |
1467 | if (mos7840_port->has_led && !mos7840_port->led_flag) { | |
1468 | mos7840_port->led_flag = true; | |
1469 | mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301); | |
1470 | mod_timer(&mos7840_port->led_timer1, | |
1471 | jiffies + msecs_to_jiffies(LED_ON_MS)); | |
1472 | } | |
1473 | ||
3f542974 PS |
1474 | /* send it down the pipe */ |
1475 | status = usb_submit_urb(urb, GFP_ATOMIC); | |
1476 | ||
1477 | if (status) { | |
0de9a702 | 1478 | mos7840_port->busy[i] = 0; |
22a416c4 | 1479 | dev_err_console(port, "%s - usb_submit_urb(write bulk) failed " |
194343d9 | 1480 | "with status = %d\n", __func__, status); |
3f542974 PS |
1481 | bytes_sent = status; |
1482 | goto exit; | |
1483 | } | |
1484 | bytes_sent = transfer_size; | |
8c1a07ff JH |
1485 | port->icount.tx += transfer_size; |
1486 | dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx); | |
95da310e | 1487 | exit: |
3f542974 PS |
1488 | return bytes_sent; |
1489 | ||
1490 | } | |
1491 | ||
1492 | /***************************************************************************** | |
1493 | * mos7840_throttle | |
1494 | * this function is called by the tty driver when it wants to stop the data | |
1495 | * being read from the port. | |
1496 | *****************************************************************************/ | |
1497 | ||
95da310e | 1498 | static void mos7840_throttle(struct tty_struct *tty) |
3f542974 | 1499 | { |
95da310e | 1500 | struct usb_serial_port *port = tty->driver_data; |
3f542974 | 1501 | struct moschip_port *mos7840_port; |
3f542974 PS |
1502 | int status; |
1503 | ||
9c134a14 | 1504 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1505 | return; |
3f542974 PS |
1506 | |
1507 | mos7840_port = mos7840_get_port_private(port); | |
1508 | ||
1509 | if (mos7840_port == NULL) | |
1510 | return; | |
1511 | ||
1512 | if (!mos7840_port->open) { | |
9c134a14 | 1513 | dev_dbg(&port->dev, "%s", "port not opened\n"); |
3f542974 PS |
1514 | return; |
1515 | } | |
1516 | ||
3f542974 PS |
1517 | /* if we are implementing XON/XOFF, send the stop character */ |
1518 | if (I_IXOFF(tty)) { | |
1519 | unsigned char stop_char = STOP_CHAR(tty); | |
95da310e AC |
1520 | status = mos7840_write(tty, port, &stop_char, 1); |
1521 | if (status <= 0) | |
3f542974 | 1522 | return; |
3f542974 | 1523 | } |
3f542974 | 1524 | /* if we are implementing RTS/CTS, toggle that line */ |
adc8d746 | 1525 | if (tty->termios.c_cflag & CRTSCTS) { |
3f542974 | 1526 | mos7840_port->shadowMCR &= ~MCR_RTS; |
95da310e | 1527 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
3f542974 | 1528 | mos7840_port->shadowMCR); |
95da310e | 1529 | if (status < 0) |
3f542974 | 1530 | return; |
3f542974 | 1531 | } |
3f542974 PS |
1532 | } |
1533 | ||
1534 | /***************************************************************************** | |
1535 | * mos7840_unthrottle | |
880af9db AC |
1536 | * this function is called by the tty driver when it wants to resume |
1537 | * the data being read from the port (called after mos7840_throttle is | |
1538 | * called) | |
3f542974 | 1539 | *****************************************************************************/ |
95da310e | 1540 | static void mos7840_unthrottle(struct tty_struct *tty) |
3f542974 | 1541 | { |
95da310e | 1542 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1543 | int status; |
1544 | struct moschip_port *mos7840_port = mos7840_get_port_private(port); | |
1545 | ||
9c134a14 | 1546 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1547 | return; |
3f542974 PS |
1548 | |
1549 | if (mos7840_port == NULL) | |
1550 | return; | |
1551 | ||
1552 | if (!mos7840_port->open) { | |
9c134a14 | 1553 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
3f542974 PS |
1554 | return; |
1555 | } | |
1556 | ||
3f542974 PS |
1557 | /* if we are implementing XON/XOFF, send the start character */ |
1558 | if (I_IXOFF(tty)) { | |
1559 | unsigned char start_char = START_CHAR(tty); | |
95da310e AC |
1560 | status = mos7840_write(tty, port, &start_char, 1); |
1561 | if (status <= 0) | |
3f542974 | 1562 | return; |
3f542974 PS |
1563 | } |
1564 | ||
1565 | /* if we are implementing RTS/CTS, toggle that line */ | |
adc8d746 | 1566 | if (tty->termios.c_cflag & CRTSCTS) { |
3f542974 | 1567 | mos7840_port->shadowMCR |= MCR_RTS; |
95da310e | 1568 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
3f542974 | 1569 | mos7840_port->shadowMCR); |
95da310e | 1570 | if (status < 0) |
3f542974 | 1571 | return; |
3f542974 | 1572 | } |
3f542974 PS |
1573 | } |
1574 | ||
60b33c13 | 1575 | static int mos7840_tiocmget(struct tty_struct *tty) |
3f542974 | 1576 | { |
95da310e | 1577 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1578 | struct moschip_port *mos7840_port; |
1579 | unsigned int result; | |
1580 | __u16 msr; | |
1581 | __u16 mcr; | |
880af9db | 1582 | int status; |
3f542974 PS |
1583 | mos7840_port = mos7840_get_port_private(port); |
1584 | ||
3f542974 PS |
1585 | if (mos7840_port == NULL) |
1586 | return -ENODEV; | |
1587 | ||
1588 | status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr); | |
1589 | status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr); | |
1590 | result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0) | |
1591 | | ((mcr & MCR_RTS) ? TIOCM_RTS : 0) | |
1592 | | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0) | |
1593 | | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0) | |
1594 | | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0) | |
1595 | | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0) | |
1596 | | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0); | |
1597 | ||
9c134a14 | 1598 | dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result); |
3f542974 PS |
1599 | |
1600 | return result; | |
1601 | } | |
1602 | ||
20b9d177 | 1603 | static int mos7840_tiocmset(struct tty_struct *tty, |
3f542974 PS |
1604 | unsigned int set, unsigned int clear) |
1605 | { | |
95da310e | 1606 | struct usb_serial_port *port = tty->driver_data; |
3f542974 PS |
1607 | struct moschip_port *mos7840_port; |
1608 | unsigned int mcr; | |
87521c46 | 1609 | int status; |
3f542974 | 1610 | |
3f542974 PS |
1611 | mos7840_port = mos7840_get_port_private(port); |
1612 | ||
1613 | if (mos7840_port == NULL) | |
1614 | return -ENODEV; | |
1615 | ||
e2984494 | 1616 | /* FIXME: What locks the port registers ? */ |
3f542974 PS |
1617 | mcr = mos7840_port->shadowMCR; |
1618 | if (clear & TIOCM_RTS) | |
1619 | mcr &= ~MCR_RTS; | |
1620 | if (clear & TIOCM_DTR) | |
1621 | mcr &= ~MCR_DTR; | |
1622 | if (clear & TIOCM_LOOP) | |
1623 | mcr &= ~MCR_LOOPBACK; | |
1624 | ||
1625 | if (set & TIOCM_RTS) | |
1626 | mcr |= MCR_RTS; | |
1627 | if (set & TIOCM_DTR) | |
1628 | mcr |= MCR_DTR; | |
1629 | if (set & TIOCM_LOOP) | |
1630 | mcr |= MCR_LOOPBACK; | |
1631 | ||
1632 | mos7840_port->shadowMCR = mcr; | |
1633 | ||
3f542974 PS |
1634 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr); |
1635 | if (status < 0) { | |
9c134a14 | 1636 | dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n"); |
87521c46 | 1637 | return status; |
3f542974 PS |
1638 | } |
1639 | ||
1640 | return 0; | |
1641 | } | |
1642 | ||
1643 | /***************************************************************************** | |
1644 | * mos7840_calc_baud_rate_divisor | |
1645 | * this function calculates the proper baud rate divisor for the specified | |
1646 | * baud rate. | |
1647 | *****************************************************************************/ | |
9c134a14 GKH |
1648 | static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port, |
1649 | int baudRate, int *divisor, | |
880af9db | 1650 | __u16 *clk_sel_val) |
3f542974 | 1651 | { |
9c134a14 | 1652 | dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate); |
3f542974 PS |
1653 | |
1654 | if (baudRate <= 115200) { | |
1655 | *divisor = 115200 / baudRate; | |
1656 | *clk_sel_val = 0x0; | |
1657 | } | |
1658 | if ((baudRate > 115200) && (baudRate <= 230400)) { | |
1659 | *divisor = 230400 / baudRate; | |
1660 | *clk_sel_val = 0x10; | |
1661 | } else if ((baudRate > 230400) && (baudRate <= 403200)) { | |
1662 | *divisor = 403200 / baudRate; | |
1663 | *clk_sel_val = 0x20; | |
1664 | } else if ((baudRate > 403200) && (baudRate <= 460800)) { | |
1665 | *divisor = 460800 / baudRate; | |
1666 | *clk_sel_val = 0x30; | |
1667 | } else if ((baudRate > 460800) && (baudRate <= 806400)) { | |
1668 | *divisor = 806400 / baudRate; | |
1669 | *clk_sel_val = 0x40; | |
1670 | } else if ((baudRate > 806400) && (baudRate <= 921600)) { | |
1671 | *divisor = 921600 / baudRate; | |
1672 | *clk_sel_val = 0x50; | |
1673 | } else if ((baudRate > 921600) && (baudRate <= 1572864)) { | |
1674 | *divisor = 1572864 / baudRate; | |
1675 | *clk_sel_val = 0x60; | |
1676 | } else if ((baudRate > 1572864) && (baudRate <= 3145728)) { | |
1677 | *divisor = 3145728 / baudRate; | |
1678 | *clk_sel_val = 0x70; | |
1679 | } | |
1680 | return 0; | |
1681 | ||
1682 | #ifdef NOTMCS7840 | |
1683 | ||
1684 | for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) { | |
1685 | if (mos7840_divisor_table[i].BaudRate == baudrate) { | |
1686 | *divisor = mos7840_divisor_table[i].Divisor; | |
1687 | return 0; | |
1688 | } | |
1689 | } | |
1690 | ||
1691 | /* After trying for all the standard baud rates * | |
1692 | * Try calculating the divisor for this baud rate */ | |
1693 | ||
1694 | if (baudrate > 75 && baudrate < 230400) { | |
1695 | /* get the divisor */ | |
1696 | custom = (__u16) (230400L / baudrate); | |
1697 | ||
1698 | /* Check for round off */ | |
1699 | round1 = (__u16) (2304000L / baudrate); | |
1700 | round = (__u16) (round1 - (custom * 10)); | |
880af9db | 1701 | if (round > 4) |
3f542974 | 1702 | custom++; |
3f542974 PS |
1703 | *divisor = custom; |
1704 | ||
9c134a14 | 1705 | dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom); |
3f542974 PS |
1706 | return 0; |
1707 | } | |
1708 | ||
9c134a14 | 1709 | dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n"); |
3f542974 PS |
1710 | return -1; |
1711 | #endif | |
1712 | } | |
1713 | ||
1714 | /***************************************************************************** | |
1715 | * mos7840_send_cmd_write_baud_rate | |
1716 | * this function sends the proper command to change the baud rate of the | |
1717 | * specified port. | |
1718 | *****************************************************************************/ | |
1719 | ||
1720 | static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port, | |
1721 | int baudRate) | |
1722 | { | |
1723 | int divisor = 0; | |
1724 | int status; | |
1725 | __u16 Data; | |
1726 | unsigned char number; | |
1727 | __u16 clk_sel_val; | |
1728 | struct usb_serial_port *port; | |
1729 | ||
1730 | if (mos7840_port == NULL) | |
1731 | return -1; | |
1732 | ||
9c134a14 GKH |
1733 | port = mos7840_port->port; |
1734 | if (mos7840_port_paranoia_check(port, __func__)) | |
3f542974 | 1735 | return -1; |
3f542974 | 1736 | |
9c134a14 | 1737 | if (mos7840_serial_paranoia_check(port->serial, __func__)) |
3f542974 | 1738 | return -1; |
3f542974 | 1739 | |
3f542974 PS |
1740 | number = mos7840_port->port->number - mos7840_port->port->serial->minor; |
1741 | ||
9c134a14 GKH |
1742 | dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__, |
1743 | mos7840_port->port->number, baudRate); | |
880af9db | 1744 | /* reset clk_uart_sel in spregOffset */ |
3f542974 PS |
1745 | if (baudRate > 115200) { |
1746 | #ifdef HW_flow_control | |
880af9db AC |
1747 | /* NOTE: need to see the pther register to modify */ |
1748 | /* setting h/w flow control bit to 1 */ | |
3f542974 PS |
1749 | Data = 0x2b; |
1750 | mos7840_port->shadowMCR = Data; | |
880af9db AC |
1751 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
1752 | Data); | |
3f542974 | 1753 | if (status < 0) { |
9c134a14 | 1754 | dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); |
3f542974 PS |
1755 | return -1; |
1756 | } | |
1757 | #endif | |
1758 | ||
1759 | } else { | |
1760 | #ifdef HW_flow_control | |
093ea2d3 | 1761 | /* setting h/w flow control bit to 0 */ |
3f542974 PS |
1762 | Data = 0xb; |
1763 | mos7840_port->shadowMCR = Data; | |
880af9db AC |
1764 | status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, |
1765 | Data); | |
3f542974 | 1766 | if (status < 0) { |
9c134a14 | 1767 | dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); |
3f542974 PS |
1768 | return -1; |
1769 | } | |
1770 | #endif | |
1771 | ||
1772 | } | |
1773 | ||
880af9db | 1774 | if (1) { /* baudRate <= 115200) */ |
3f542974 PS |
1775 | clk_sel_val = 0x0; |
1776 | Data = 0x0; | |
9c134a14 | 1777 | status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor, |
3f542974 | 1778 | &clk_sel_val); |
880af9db AC |
1779 | status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, |
1780 | &Data); | |
3f542974 | 1781 | if (status < 0) { |
9c134a14 | 1782 | dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n"); |
3f542974 PS |
1783 | return -1; |
1784 | } | |
1785 | Data = (Data & 0x8f) | clk_sel_val; | |
880af9db AC |
1786 | status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, |
1787 | Data); | |
3f542974 | 1788 | if (status < 0) { |
9c134a14 | 1789 | dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n"); |
3f542974 PS |
1790 | return -1; |
1791 | } | |
1792 | /* Calculate the Divisor */ | |
1793 | ||
1794 | if (status) { | |
194343d9 | 1795 | dev_err(&port->dev, "%s - bad baud rate\n", __func__); |
3f542974 PS |
1796 | return status; |
1797 | } | |
1798 | /* Enable access to divisor latch */ | |
1799 | Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB; | |
1800 | mos7840_port->shadowLCR = Data; | |
1801 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1802 | ||
1803 | /* Write the divisor */ | |
1804 | Data = (unsigned char)(divisor & 0xff); | |
9c134a14 | 1805 | dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data); |
3f542974 PS |
1806 | mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data); |
1807 | ||
1808 | Data = (unsigned char)((divisor & 0xff00) >> 8); | |
9c134a14 | 1809 | dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data); |
3f542974 PS |
1810 | mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data); |
1811 | ||
1812 | /* Disable access to divisor latch */ | |
1813 | Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB; | |
1814 | mos7840_port->shadowLCR = Data; | |
1815 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1816 | ||
1817 | } | |
3f542974 PS |
1818 | return status; |
1819 | } | |
1820 | ||
1821 | /***************************************************************************** | |
1822 | * mos7840_change_port_settings | |
1823 | * This routine is called to set the UART on the device to match | |
1824 | * the specified new settings. | |
1825 | *****************************************************************************/ | |
1826 | ||
95da310e AC |
1827 | static void mos7840_change_port_settings(struct tty_struct *tty, |
1828 | struct moschip_port *mos7840_port, struct ktermios *old_termios) | |
3f542974 | 1829 | { |
3f542974 PS |
1830 | int baud; |
1831 | unsigned cflag; | |
1832 | unsigned iflag; | |
1833 | __u8 lData; | |
1834 | __u8 lParity; | |
1835 | __u8 lStop; | |
1836 | int status; | |
1837 | __u16 Data; | |
1838 | struct usb_serial_port *port; | |
1839 | struct usb_serial *serial; | |
1840 | ||
1841 | if (mos7840_port == NULL) | |
1842 | return; | |
1843 | ||
9c134a14 | 1844 | port = mos7840_port->port; |
3f542974 | 1845 | |
9c134a14 | 1846 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1847 | return; |
3f542974 | 1848 | |
9c134a14 | 1849 | if (mos7840_serial_paranoia_check(port->serial, __func__)) |
3f542974 | 1850 | return; |
3f542974 PS |
1851 | |
1852 | serial = port->serial; | |
1853 | ||
3f542974 | 1854 | if (!mos7840_port->open) { |
9c134a14 | 1855 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
3f542974 PS |
1856 | return; |
1857 | } | |
1858 | ||
3f542974 PS |
1859 | lData = LCR_BITS_8; |
1860 | lStop = LCR_STOP_1; | |
1861 | lParity = LCR_PAR_NONE; | |
1862 | ||
adc8d746 AC |
1863 | cflag = tty->termios.c_cflag; |
1864 | iflag = tty->termios.c_iflag; | |
3f542974 PS |
1865 | |
1866 | /* Change the number of bits */ | |
1867 | if (cflag & CSIZE) { | |
1868 | switch (cflag & CSIZE) { | |
1869 | case CS5: | |
1870 | lData = LCR_BITS_5; | |
1871 | break; | |
1872 | ||
1873 | case CS6: | |
1874 | lData = LCR_BITS_6; | |
1875 | break; | |
1876 | ||
1877 | case CS7: | |
1878 | lData = LCR_BITS_7; | |
1879 | break; | |
1880 | default: | |
1881 | case CS8: | |
1882 | lData = LCR_BITS_8; | |
1883 | break; | |
1884 | } | |
1885 | } | |
1886 | /* Change the Parity bit */ | |
1887 | if (cflag & PARENB) { | |
1888 | if (cflag & PARODD) { | |
1889 | lParity = LCR_PAR_ODD; | |
9c134a14 | 1890 | dev_dbg(&port->dev, "%s - parity = odd\n", __func__); |
3f542974 PS |
1891 | } else { |
1892 | lParity = LCR_PAR_EVEN; | |
9c134a14 | 1893 | dev_dbg(&port->dev, "%s - parity = even\n", __func__); |
3f542974 PS |
1894 | } |
1895 | ||
1896 | } else { | |
9c134a14 | 1897 | dev_dbg(&port->dev, "%s - parity = none\n", __func__); |
3f542974 PS |
1898 | } |
1899 | ||
880af9db | 1900 | if (cflag & CMSPAR) |
3f542974 | 1901 | lParity = lParity | 0x20; |
3f542974 PS |
1902 | |
1903 | /* Change the Stop bit */ | |
1904 | if (cflag & CSTOPB) { | |
1905 | lStop = LCR_STOP_2; | |
9c134a14 | 1906 | dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__); |
3f542974 PS |
1907 | } else { |
1908 | lStop = LCR_STOP_1; | |
9c134a14 | 1909 | dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__); |
3f542974 PS |
1910 | } |
1911 | ||
1912 | /* Update the LCR with the correct value */ | |
1913 | mos7840_port->shadowLCR &= | |
1914 | ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK); | |
1915 | mos7840_port->shadowLCR |= (lData | lParity | lStop); | |
1916 | ||
9c134a14 GKH |
1917 | dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__, |
1918 | mos7840_port->shadowLCR); | |
3f542974 PS |
1919 | /* Disable Interrupts */ |
1920 | Data = 0x00; | |
1921 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
1922 | ||
1923 | Data = 0x00; | |
1924 | mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); | |
1925 | ||
1926 | Data = 0xcf; | |
1927 | mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); | |
1928 | ||
1929 | /* Send the updated LCR value to the mos7840 */ | |
1930 | Data = mos7840_port->shadowLCR; | |
1931 | ||
1932 | mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); | |
1933 | ||
1934 | Data = 0x00b; | |
1935 | mos7840_port->shadowMCR = Data; | |
1936 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1937 | Data = 0x00b; | |
1938 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1939 | ||
1940 | /* set up the MCR register and send it to the mos7840 */ | |
1941 | ||
1942 | mos7840_port->shadowMCR = MCR_MASTER_IE; | |
880af9db | 1943 | if (cflag & CBAUD) |
3f542974 | 1944 | mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS); |
3f542974 | 1945 | |
880af9db | 1946 | if (cflag & CRTSCTS) |
3f542974 | 1947 | mos7840_port->shadowMCR |= (MCR_XON_ANY); |
880af9db | 1948 | else |
3f542974 | 1949 | mos7840_port->shadowMCR &= ~(MCR_XON_ANY); |
3f542974 PS |
1950 | |
1951 | Data = mos7840_port->shadowMCR; | |
1952 | mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); | |
1953 | ||
1954 | /* Determine divisor based on baud rate */ | |
1955 | baud = tty_get_baud_rate(tty); | |
1956 | ||
1957 | if (!baud) { | |
1958 | /* pick a default, any default... */ | |
9c134a14 | 1959 | dev_dbg(&port->dev, "%s", "Picked default baud...\n"); |
3f542974 PS |
1960 | baud = 9600; |
1961 | } | |
1962 | ||
9c134a14 | 1963 | dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud); |
3f542974 PS |
1964 | status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud); |
1965 | ||
1966 | /* Enable Interrupts */ | |
1967 | Data = 0x0c; | |
1968 | mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); | |
1969 | ||
50de36f7 | 1970 | if (mos7840_port->read_urb_busy == false) { |
50de36f7 | 1971 | mos7840_port->read_urb_busy = true; |
3f542974 | 1972 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
3f542974 | 1973 | if (status) { |
9c134a14 | 1974 | dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", |
3f542974 | 1975 | status); |
50de36f7 | 1976 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
1977 | } |
1978 | } | |
9c134a14 GKH |
1979 | dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__, |
1980 | mos7840_port->shadowLCR); | |
3f542974 PS |
1981 | } |
1982 | ||
1983 | /***************************************************************************** | |
1984 | * mos7840_set_termios | |
1985 | * this function is called by the tty driver when it wants to change | |
1986 | * the termios structure | |
1987 | *****************************************************************************/ | |
1988 | ||
95da310e AC |
1989 | static void mos7840_set_termios(struct tty_struct *tty, |
1990 | struct usb_serial_port *port, | |
606d099c | 1991 | struct ktermios *old_termios) |
3f542974 PS |
1992 | { |
1993 | int status; | |
1994 | unsigned int cflag; | |
1995 | struct usb_serial *serial; | |
1996 | struct moschip_port *mos7840_port; | |
3363155b | 1997 | |
9c134a14 | 1998 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 1999 | return; |
3f542974 PS |
2000 | |
2001 | serial = port->serial; | |
2002 | ||
9c134a14 | 2003 | if (mos7840_serial_paranoia_check(serial, __func__)) |
3f542974 | 2004 | return; |
3f542974 PS |
2005 | |
2006 | mos7840_port = mos7840_get_port_private(port); | |
2007 | ||
2008 | if (mos7840_port == NULL) | |
2009 | return; | |
2010 | ||
3f542974 | 2011 | if (!mos7840_port->open) { |
9c134a14 | 2012 | dev_dbg(&port->dev, "%s - port not opened\n", __func__); |
3f542974 PS |
2013 | return; |
2014 | } | |
2015 | ||
9c134a14 | 2016 | dev_dbg(&port->dev, "%s", "setting termios - \n"); |
3f542974 | 2017 | |
adc8d746 | 2018 | cflag = tty->termios.c_cflag; |
3f542974 | 2019 | |
9c134a14 | 2020 | dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, |
d9a80746 | 2021 | tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag)); |
9c134a14 GKH |
2022 | dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, |
2023 | old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); | |
2024 | dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); | |
3f542974 PS |
2025 | |
2026 | /* change the port settings to the new ones specified */ | |
2027 | ||
95da310e | 2028 | mos7840_change_port_settings(tty, mos7840_port, old_termios); |
3f542974 PS |
2029 | |
2030 | if (!mos7840_port->read_urb) { | |
9c134a14 | 2031 | dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n"); |
3f542974 PS |
2032 | return; |
2033 | } | |
2034 | ||
50de36f7 | 2035 | if (mos7840_port->read_urb_busy == false) { |
50de36f7 | 2036 | mos7840_port->read_urb_busy = true; |
3f542974 PS |
2037 | status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); |
2038 | if (status) { | |
9c134a14 | 2039 | dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n", |
3f542974 | 2040 | status); |
50de36f7 | 2041 | mos7840_port->read_urb_busy = false; |
3f542974 PS |
2042 | } |
2043 | } | |
3f542974 PS |
2044 | } |
2045 | ||
2046 | /***************************************************************************** | |
2047 | * mos7840_get_lsr_info - get line status register info | |
2048 | * | |
2049 | * Purpose: Let user call ioctl() to get info when the UART physically | |
2050 | * is emptied. On bus types like RS485, the transmitter must | |
2051 | * release the bus after transmitting. This must be done when | |
2052 | * the transmit shift register is empty, not be done when the | |
2053 | * transmit holding register is empty. This functionality | |
2054 | * allows an RS485 driver to be written in user space. | |
2055 | *****************************************************************************/ | |
2056 | ||
95da310e | 2057 | static int mos7840_get_lsr_info(struct tty_struct *tty, |
97c4965d | 2058 | unsigned int __user *value) |
3f542974 PS |
2059 | { |
2060 | int count; | |
2061 | unsigned int result = 0; | |
2062 | ||
95da310e | 2063 | count = mos7840_chars_in_buffer(tty); |
9c134a14 | 2064 | if (count == 0) |
3f542974 | 2065 | result = TIOCSER_TEMT; |
3f542974 PS |
2066 | |
2067 | if (copy_to_user(value, &result, sizeof(int))) | |
2068 | return -EFAULT; | |
2069 | return 0; | |
2070 | } | |
2071 | ||
3f542974 PS |
2072 | /***************************************************************************** |
2073 | * mos7840_get_serial_info | |
2074 | * function to get information about serial port | |
2075 | *****************************************************************************/ | |
2076 | ||
2077 | static int mos7840_get_serial_info(struct moschip_port *mos7840_port, | |
97c4965d | 2078 | struct serial_struct __user *retinfo) |
3f542974 PS |
2079 | { |
2080 | struct serial_struct tmp; | |
2081 | ||
2082 | if (mos7840_port == NULL) | |
2083 | return -1; | |
2084 | ||
2085 | if (!retinfo) | |
2086 | return -EFAULT; | |
2087 | ||
2088 | memset(&tmp, 0, sizeof(tmp)); | |
2089 | ||
2090 | tmp.type = PORT_16550A; | |
2091 | tmp.line = mos7840_port->port->serial->minor; | |
2092 | tmp.port = mos7840_port->port->number; | |
2093 | tmp.irq = 0; | |
2094 | tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; | |
2095 | tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE; | |
2096 | tmp.baud_base = 9600; | |
2097 | tmp.close_delay = 5 * HZ; | |
2098 | tmp.closing_wait = 30 * HZ; | |
2099 | ||
2100 | if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
2101 | return -EFAULT; | |
2102 | return 0; | |
2103 | } | |
2104 | ||
2105 | /***************************************************************************** | |
2106 | * SerialIoctl | |
2107 | * this function handles any ioctl calls to the driver | |
2108 | *****************************************************************************/ | |
2109 | ||
00a0d0d6 | 2110 | static int mos7840_ioctl(struct tty_struct *tty, |
3f542974 PS |
2111 | unsigned int cmd, unsigned long arg) |
2112 | { | |
95da310e | 2113 | struct usb_serial_port *port = tty->driver_data; |
97c4965d | 2114 | void __user *argp = (void __user *)arg; |
3f542974 | 2115 | struct moschip_port *mos7840_port; |
c9fac853 | 2116 | unsigned long flags; |
3f542974 PS |
2117 | struct async_icount cnow; |
2118 | struct async_icount cprev; | |
3f542974 | 2119 | |
9c134a14 | 2120 | if (mos7840_port_paranoia_check(port, __func__)) |
3f542974 | 2121 | return -1; |
3f542974 PS |
2122 | |
2123 | mos7840_port = mos7840_get_port_private(port); | |
3f542974 PS |
2124 | |
2125 | if (mos7840_port == NULL) | |
2126 | return -1; | |
2127 | ||
9c134a14 | 2128 | dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd); |
3f542974 PS |
2129 | |
2130 | switch (cmd) { | |
2131 | /* return number of bytes available */ | |
2132 | ||
3f542974 | 2133 | case TIOCSERGETLSR: |
9c134a14 | 2134 | dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__); |
95da310e | 2135 | return mos7840_get_lsr_info(tty, argp); |
3f542974 | 2136 | |
3f542974 | 2137 | case TIOCGSERIAL: |
9c134a14 | 2138 | dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__); |
97c4965d | 2139 | return mos7840_get_serial_info(mos7840_port, argp); |
3f542974 PS |
2140 | |
2141 | case TIOCSSERIAL: | |
9c134a14 | 2142 | dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__); |
3f542974 PS |
2143 | break; |
2144 | ||
2145 | case TIOCMIWAIT: | |
9c134a14 | 2146 | dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__); |
c9fac853 | 2147 | spin_lock_irqsave(&port->lock, flags); |
8c1a07ff | 2148 | cprev = port->icount; |
c9fac853 | 2149 | spin_unlock_irqrestore(&port->lock, flags); |
3f542974 | 2150 | while (1) { |
880af9db | 2151 | /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */ |
3f542974 | 2152 | mos7840_port->delta_msr_cond = 0; |
a14430db JH |
2153 | wait_event_interruptible(port->delta_msr_wait, |
2154 | (port->serial->disconnected || | |
2155 | mos7840_port-> | |
3f542974 PS |
2156 | delta_msr_cond == 1)); |
2157 | ||
2158 | /* see if a signal did it */ | |
2159 | if (signal_pending(current)) | |
2160 | return -ERESTARTSYS; | |
a14430db JH |
2161 | |
2162 | if (port->serial->disconnected) | |
2163 | return -EIO; | |
2164 | ||
c9fac853 | 2165 | spin_lock_irqsave(&port->lock, flags); |
8c1a07ff | 2166 | cnow = port->icount; |
c9fac853 JH |
2167 | spin_unlock_irqrestore(&port->lock, flags); |
2168 | ||
3f542974 PS |
2169 | if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && |
2170 | cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) | |
2171 | return -EIO; /* no change => error */ | |
c9fac853 | 2172 | |
3f542974 PS |
2173 | if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || |
2174 | ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || | |
2175 | ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || | |
2176 | ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { | |
2177 | return 0; | |
2178 | } | |
2179 | cprev = cnow; | |
2180 | } | |
2181 | /* NOTREACHED */ | |
2182 | break; | |
2183 | ||
3f542974 PS |
2184 | default: |
2185 | break; | |
2186 | } | |
3f542974 PS |
2187 | return -ENOIOCTLCMD; |
2188 | } | |
2189 | ||
0eafe4de D |
2190 | static int mos7810_check(struct usb_serial *serial) |
2191 | { | |
2192 | int i, pass_count = 0; | |
2193 | __u16 data = 0, mcr_data = 0; | |
2194 | __u16 test_pattern = 0x55AA; | |
2195 | ||
2196 | /* Store MCR setting */ | |
2197 | usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), | |
2198 | MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, | |
2199 | &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); | |
2200 | ||
2201 | for (i = 0; i < 16; i++) { | |
2202 | /* Send the 1-bit test pattern out to MCS7810 test pin */ | |
2203 | usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
2204 | MCS_WRREQ, MCS_WR_RTYPE, | |
2205 | (0x0300 | (((test_pattern >> i) & 0x0001) << 1)), | |
2206 | MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); | |
2207 | ||
2208 | /* Read the test pattern back */ | |
2209 | usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), | |
2210 | MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, | |
2211 | VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); | |
2212 | ||
2213 | /* If this is a MCS7810 device, both test patterns must match */ | |
2214 | if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) | |
2215 | break; | |
2216 | ||
2217 | pass_count++; | |
2218 | } | |
2219 | ||
2220 | /* Restore MCR setting */ | |
2221 | usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ, | |
2222 | MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, | |
2223 | 0, MOS_WDR_TIMEOUT); | |
2224 | ||
2225 | if (pass_count == 16) | |
2226 | return 1; | |
2227 | ||
2228 | return 0; | |
2229 | } | |
2230 | ||
3f542974 PS |
2231 | static int mos7840_calc_num_ports(struct usb_serial *serial) |
2232 | { | |
0eafe4de | 2233 | __u16 data = 0x00; |
093ea2d3 DL |
2234 | int mos7840_num_ports; |
2235 | ||
0eafe4de D |
2236 | usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), |
2237 | MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, | |
093ea2d3 DL |
2238 | VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); |
2239 | ||
0eafe4de D |
2240 | if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || |
2241 | serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { | |
2242 | device_type = serial->dev->descriptor.idProduct; | |
093ea2d3 | 2243 | } else { |
0eafe4de D |
2244 | /* For a MCS7840 device GPIO0 must be set to 1 */ |
2245 | if ((data & 0x01) == 1) | |
2246 | device_type = MOSCHIP_DEVICE_ID_7840; | |
2247 | else if (mos7810_check(serial)) | |
2248 | device_type = MOSCHIP_DEVICE_ID_7810; | |
2249 | else | |
2250 | device_type = MOSCHIP_DEVICE_ID_7820; | |
3f542974 | 2251 | } |
093ea2d3 | 2252 | |
0eafe4de D |
2253 | mos7840_num_ports = (device_type >> 4) & 0x000F; |
2254 | serial->num_bulk_in = mos7840_num_ports; | |
2255 | serial->num_bulk_out = mos7840_num_ports; | |
2256 | serial->num_ports = mos7840_num_ports; | |
2257 | ||
3f542974 PS |
2258 | return mos7840_num_ports; |
2259 | } | |
2260 | ||
80c00750 | 2261 | static int mos7840_port_probe(struct usb_serial_port *port) |
3f542974 | 2262 | { |
80c00750 | 2263 | struct usb_serial *serial = port->serial; |
3f542974 | 2264 | struct moschip_port *mos7840_port; |
80c00750 JH |
2265 | int status; |
2266 | int pnum; | |
3f542974 | 2267 | __u16 Data; |
3f542974 | 2268 | |
3f542974 PS |
2269 | /* we set up the pointers to the endpoints in the mos7840_open * |
2270 | * function, as the structures aren't created yet. */ | |
2271 | ||
80c00750 JH |
2272 | pnum = port->number - serial->minor; |
2273 | ||
ae685eff JH |
2274 | dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum); |
2275 | mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); | |
2276 | if (mos7840_port == NULL) { | |
2277 | dev_err(&port->dev, "%s - Out of memory\n", __func__); | |
2278 | return -ENOMEM; | |
2279 | } | |
3f542974 | 2280 | |
ae685eff JH |
2281 | /* Initialize all port interrupt end point to port 0 int |
2282 | * endpoint. Our device has only one interrupt end point | |
2283 | * common to all port */ | |
2284 | ||
2285 | mos7840_port->port = port; | |
2286 | mos7840_set_port_private(port, mos7840_port); | |
2287 | spin_lock_init(&mos7840_port->pool_lock); | |
2288 | ||
2289 | /* minor is not initialised until later by | |
2290 | * usb-serial.c:get_free_serial() and cannot therefore be used | |
2291 | * to index device instances */ | |
2292 | mos7840_port->port_num = pnum + 1; | |
2293 | dev_dbg(&port->dev, "port->number = %d\n", port->number); | |
2294 | dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor); | |
2295 | dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num); | |
2296 | dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor); | |
2297 | ||
2298 | if (mos7840_port->port_num == 1) { | |
2299 | mos7840_port->SpRegOffset = 0x0; | |
2300 | mos7840_port->ControlRegOffset = 0x1; | |
2301 | mos7840_port->DcrRegOffset = 0x4; | |
2302 | } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) { | |
2303 | mos7840_port->SpRegOffset = 0x8; | |
2304 | mos7840_port->ControlRegOffset = 0x9; | |
2305 | mos7840_port->DcrRegOffset = 0x16; | |
2306 | } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) { | |
2307 | mos7840_port->SpRegOffset = 0xa; | |
2308 | mos7840_port->ControlRegOffset = 0xb; | |
2309 | mos7840_port->DcrRegOffset = 0x19; | |
2310 | } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) { | |
2311 | mos7840_port->SpRegOffset = 0xa; | |
2312 | mos7840_port->ControlRegOffset = 0xb; | |
2313 | mos7840_port->DcrRegOffset = 0x19; | |
2314 | } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) { | |
2315 | mos7840_port->SpRegOffset = 0xc; | |
2316 | mos7840_port->ControlRegOffset = 0xd; | |
2317 | mos7840_port->DcrRegOffset = 0x1c; | |
2318 | } | |
2319 | mos7840_dump_serial_port(port, mos7840_port); | |
2320 | mos7840_set_port_private(port, mos7840_port); | |
2321 | ||
2322 | /* enable rx_disable bit in control register */ | |
2323 | status = mos7840_get_reg_sync(port, | |
2324 | mos7840_port->ControlRegOffset, &Data); | |
2325 | if (status < 0) { | |
2326 | dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status); | |
2327 | goto out; | |
2328 | } else | |
2329 | dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status); | |
2330 | Data |= 0x08; /* setting driver done bit */ | |
2331 | Data |= 0x04; /* sp1_bit to have cts change reflect in | |
2332 | modem status reg */ | |
2333 | ||
2334 | /* Data |= 0x20; //rx_disable bit */ | |
2335 | status = mos7840_set_reg_sync(port, | |
2336 | mos7840_port->ControlRegOffset, Data); | |
2337 | if (status < 0) { | |
2338 | dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status); | |
2339 | goto out; | |
2340 | } else | |
2341 | dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status); | |
2342 | ||
2343 | /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2 | |
2344 | and 0x24 in DCR3 */ | |
2345 | Data = 0x01; | |
2346 | status = mos7840_set_reg_sync(port, | |
2347 | (__u16) (mos7840_port->DcrRegOffset + 0), Data); | |
2348 | if (status < 0) { | |
2349 | dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status); | |
2350 | goto out; | |
2351 | } else | |
2352 | dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status); | |
3f542974 | 2353 | |
ae685eff JH |
2354 | Data = 0x05; |
2355 | status = mos7840_set_reg_sync(port, | |
2356 | (__u16) (mos7840_port->DcrRegOffset + 1), Data); | |
2357 | if (status < 0) { | |
2358 | dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status); | |
2359 | goto out; | |
2360 | } else | |
2361 | dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status); | |
3f542974 | 2362 | |
ae685eff JH |
2363 | Data = 0x24; |
2364 | status = mos7840_set_reg_sync(port, | |
2365 | (__u16) (mos7840_port->DcrRegOffset + 2), Data); | |
2366 | if (status < 0) { | |
2367 | dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status); | |
2368 | goto out; | |
2369 | } else | |
2370 | dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status); | |
3f542974 | 2371 | |
ae685eff JH |
2372 | /* write values in clkstart0x0 and clkmulti 0x20 */ |
2373 | Data = 0x0; | |
2374 | status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data); | |
2375 | if (status < 0) { | |
2376 | dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status); | |
2377 | goto out; | |
2378 | } else | |
2379 | dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status); | |
3f542974 | 2380 | |
ae685eff JH |
2381 | Data = 0x20; |
2382 | status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data); | |
2383 | if (status < 0) { | |
2384 | dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); | |
2385 | goto error; | |
2386 | } else | |
2387 | dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status); | |
3f542974 | 2388 | |
ae685eff JH |
2389 | /* write value 0x0 to scratchpad register */ |
2390 | Data = 0x00; | |
2391 | status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data); | |
2392 | if (status < 0) { | |
2393 | dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status); | |
2394 | goto out; | |
2395 | } else | |
2396 | dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status); | |
2397 | ||
2398 | /* Zero Length flag register */ | |
2399 | if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) { | |
2400 | Data = 0xff; | |
80c00750 | 2401 | status = mos7840_set_reg_sync(port, |
ae685eff JH |
2402 | (__u16) (ZLP_REG1 + |
2403 | ((__u16)mos7840_port->port_num)), Data); | |
2404 | dev_dbg(&port->dev, "ZLIP offset %x\n", | |
2405 | (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num))); | |
3f542974 | 2406 | if (status < 0) { |
ae685eff JH |
2407 | dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status); |
2408 | goto out; | |
3f542974 | 2409 | } else |
ae685eff JH |
2410 | dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status); |
2411 | } else { | |
2412 | Data = 0xff; | |
80c00750 | 2413 | status = mos7840_set_reg_sync(port, |
ae685eff JH |
2414 | (__u16) (ZLP_REG1 + |
2415 | ((__u16)mos7840_port->port_num) - 0x1), Data); | |
2416 | dev_dbg(&port->dev, "ZLIP offset %x\n", | |
2417 | (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1)); | |
3f542974 | 2418 | if (status < 0) { |
ae685eff JH |
2419 | dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status); |
2420 | goto out; | |
3f542974 | 2421 | } else |
ae685eff | 2422 | dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status); |
3f542974 | 2423 | |
ae685eff JH |
2424 | } |
2425 | mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); | |
2426 | mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); | |
2427 | mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), | |
2428 | GFP_KERNEL); | |
2429 | if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || | |
2430 | !mos7840_port->dr) { | |
2431 | status = -ENOMEM; | |
2432 | goto error; | |
2433 | } | |
0eafe4de | 2434 | |
ae685eff | 2435 | mos7840_port->has_led = false; |
0eafe4de | 2436 | |
ae685eff JH |
2437 | /* Initialize LED timers */ |
2438 | if (device_type == MOSCHIP_DEVICE_ID_7810) { | |
2439 | mos7840_port->has_led = true; | |
0eafe4de | 2440 | |
ae685eff JH |
2441 | init_timer(&mos7840_port->led_timer1); |
2442 | mos7840_port->led_timer1.function = mos7840_led_off; | |
2443 | mos7840_port->led_timer1.expires = | |
2444 | jiffies + msecs_to_jiffies(LED_ON_MS); | |
2445 | mos7840_port->led_timer1.data = (unsigned long)mos7840_port; | |
0eafe4de | 2446 | |
ae685eff JH |
2447 | init_timer(&mos7840_port->led_timer2); |
2448 | mos7840_port->led_timer2.function = mos7840_led_flag_off; | |
2449 | mos7840_port->led_timer2.expires = | |
2450 | jiffies + msecs_to_jiffies(LED_OFF_MS); | |
2451 | mos7840_port->led_timer2.data = (unsigned long)mos7840_port; | |
0eafe4de | 2452 | |
ae685eff | 2453 | mos7840_port->led_flag = false; |
3f542974 | 2454 | |
ae685eff JH |
2455 | /* Turn off LED */ |
2456 | mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); | |
2457 | } | |
2458 | out: | |
80c00750 JH |
2459 | if (pnum == serial->num_ports - 1) { |
2460 | /* Zero Length flag enable */ | |
2461 | Data = 0x0f; | |
2462 | status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); | |
2463 | if (status < 0) { | |
2464 | dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status); | |
2465 | goto error; | |
2466 | } else | |
2467 | dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status); | |
2468 | ||
2469 | /* setting configuration feature to one */ | |
2470 | usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
2471 | 0x03, 0x00, 0x01, 0x00, NULL, 0x00, | |
2472 | MOS_WDR_TIMEOUT); | |
2473 | } | |
3f542974 | 2474 | return 0; |
0de9a702 | 2475 | error: |
80c00750 JH |
2476 | kfree(mos7840_port->dr); |
2477 | kfree(mos7840_port->ctrl_buf); | |
2478 | usb_free_urb(mos7840_port->control_urb); | |
2479 | kfree(mos7840_port); | |
0de9a702 | 2480 | |
0de9a702 | 2481 | return status; |
3f542974 PS |
2482 | } |
2483 | ||
80c00750 | 2484 | static int mos7840_port_remove(struct usb_serial_port *port) |
3f542974 | 2485 | { |
3f542974 | 2486 | struct moschip_port *mos7840_port; |
3f542974 | 2487 | |
80c00750 | 2488 | mos7840_port = mos7840_get_port_private(port); |
3f542974 | 2489 | |
80c00750 JH |
2490 | if (mos7840_port->has_led) { |
2491 | /* Turn off LED */ | |
2492 | mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300); | |
3f542974 | 2493 | |
80c00750 JH |
2494 | del_timer_sync(&mos7840_port->led_timer1); |
2495 | del_timer_sync(&mos7840_port->led_timer2); | |
f9c99bb8 | 2496 | } |
80c00750 JH |
2497 | usb_kill_urb(mos7840_port->control_urb); |
2498 | usb_free_urb(mos7840_port->control_urb); | |
2499 | kfree(mos7840_port->ctrl_buf); | |
2500 | kfree(mos7840_port->dr); | |
2501 | kfree(mos7840_port); | |
f9c99bb8 | 2502 | |
80c00750 | 2503 | return 0; |
3f542974 PS |
2504 | } |
2505 | ||
2506 | static struct usb_serial_driver moschip7840_4port_device = { | |
2507 | .driver = { | |
2508 | .owner = THIS_MODULE, | |
2509 | .name = "mos7840", | |
2510 | }, | |
2511 | .description = DRIVER_DESC, | |
68e24113 | 2512 | .id_table = id_table, |
3f542974 | 2513 | .num_ports = 4, |
3f542974 PS |
2514 | .open = mos7840_open, |
2515 | .close = mos7840_close, | |
2516 | .write = mos7840_write, | |
2517 | .write_room = mos7840_write_room, | |
2518 | .chars_in_buffer = mos7840_chars_in_buffer, | |
2519 | .throttle = mos7840_throttle, | |
2520 | .unthrottle = mos7840_unthrottle, | |
2521 | .calc_num_ports = mos7840_calc_num_ports, | |
2522 | #ifdef MCSSerialProbe | |
2523 | .probe = mos7840_serial_probe, | |
2524 | #endif | |
2525 | .ioctl = mos7840_ioctl, | |
2526 | .set_termios = mos7840_set_termios, | |
2527 | .break_ctl = mos7840_break, | |
2528 | .tiocmget = mos7840_tiocmget, | |
2529 | .tiocmset = mos7840_tiocmset, | |
8c1a07ff | 2530 | .get_icount = usb_serial_generic_get_icount, |
80c00750 JH |
2531 | .port_probe = mos7840_port_probe, |
2532 | .port_remove = mos7840_port_remove, | |
3f542974 PS |
2533 | .read_bulk_callback = mos7840_bulk_in_callback, |
2534 | .read_int_callback = mos7840_interrupt_callback, | |
2535 | }; | |
2536 | ||
4d2a7aff AS |
2537 | static struct usb_serial_driver * const serial_drivers[] = { |
2538 | &moschip7840_4port_device, NULL | |
2539 | }; | |
2540 | ||
68e24113 | 2541 | module_usb_serial_driver(serial_drivers, id_table); |
3f542974 | 2542 | |
3f542974 PS |
2543 | MODULE_DESCRIPTION(DRIVER_DESC); |
2544 | MODULE_LICENSE("GPL"); |