]>
Commit | Line | Data |
---|---|---|
6d9b3a7e SR |
1 | // SPDX-License-Identifier: GPL-2.0+ |
2 | /* | |
3 | * Renesas R69328 panel driver | |
4 | * | |
5 | * Copyright (c) 2022 Svyatoslav Ryhel <clamor95@gmail.com> | |
6 | */ | |
7 | ||
d678a59d | 8 | #include <common.h> |
6d9b3a7e SR |
9 | #include <backlight.h> |
10 | #include <dm.h> | |
11 | #include <panel.h> | |
12 | #include <log.h> | |
13 | #include <misc.h> | |
14 | #include <mipi_display.h> | |
15 | #include <mipi_dsi.h> | |
16 | #include <asm/gpio.h> | |
17 | #include <linux/delay.h> | |
18 | #include <linux/err.h> | |
19 | #include <power/regulator.h> | |
20 | ||
21 | /* | |
81f3a665 | 22 | * The datasheet is not publicly available, all values are |
6d9b3a7e SR |
23 | * taken from the downstream. If you have access to datasheets, |
24 | * corrections are welcome. | |
25 | */ | |
26 | ||
27 | #define R69328_MACP 0xB0 /* Manufacturer Command Access Protect */ | |
28 | ||
29 | #define R69328_GAMMA_SET_A 0xC8 /* Gamma Setting A */ | |
30 | #define R69328_GAMMA_SET_B 0xC9 /* Gamma Setting B */ | |
31 | #define R69328_GAMMA_SET_C 0xCA /* Gamma Setting C */ | |
32 | ||
33 | #define R69328_POWER_SET 0xD1 | |
34 | ||
35 | struct renesas_r69328_priv { | |
36 | struct udevice *backlight; | |
37 | ||
38 | struct gpio_desc enable_gpio; | |
39 | struct gpio_desc reset_gpio; | |
40 | }; | |
41 | ||
42 | static const u8 address_mode[] = { | |
43 | MIPI_DCS_SET_ADDRESS_MODE | |
44 | }; | |
45 | ||
46 | #define dsi_generic_write_seq(dsi, cmd, seq...) do { \ | |
47 | static const u8 b[] = { cmd, seq }; \ | |
48 | int ret; \ | |
49 | ret = mipi_dsi_dcs_write_buffer(dsi, b, ARRAY_SIZE(b)); \ | |
50 | if (ret < 0) \ | |
51 | return ret; \ | |
52 | } while (0) | |
53 | ||
54 | static struct display_timing default_timing = { | |
55 | .pixelclock.typ = 68000000, | |
56 | .hactive.typ = 720, | |
57 | .hfront_porch.typ = 92, | |
58 | .hback_porch.typ = 62, | |
59 | .hsync_len.typ = 4, | |
60 | .vactive.typ = 1280, | |
61 | .vfront_porch.typ = 6, | |
62 | .vback_porch.typ = 3, | |
63 | .vsync_len.typ = 1, | |
64 | }; | |
65 | ||
66 | static int renesas_r69328_enable_backlight(struct udevice *dev) | |
67 | { | |
6d9b3a7e SR |
68 | struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); |
69 | struct mipi_dsi_device *dsi = plat->device; | |
70 | int ret; | |
71 | ||
72 | mipi_dsi_dcs_write_buffer(dsi, address_mode, | |
73 | sizeof(address_mode)); | |
74 | ||
75 | ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4); | |
76 | if (ret < 0) { | |
77 | log_err("failed to set pixel format: %d\n", ret); | |
78 | return ret; | |
79 | } | |
80 | ||
81 | ret = mipi_dsi_dcs_exit_sleep_mode(dsi); | |
82 | if (ret < 0) { | |
83 | log_err("failed to exit sleep mode: %d\n", ret); | |
84 | return ret; | |
85 | } | |
86 | ||
87 | mdelay(100); | |
88 | ||
89 | /* MACP Off */ | |
90 | dsi_generic_write_seq(dsi, R69328_MACP, 0x04); | |
91 | ||
92 | dsi_generic_write_seq(dsi, R69328_POWER_SET, 0x14, | |
93 | 0x1d, 0x21, 0x67, 0x11, 0x9a); | |
94 | ||
95 | dsi_generic_write_seq(dsi, R69328_GAMMA_SET_A, 0x00, | |
96 | 0x1a, 0x20, 0x28, 0x25, 0x24, | |
97 | 0x26, 0x15, 0x13, 0x11, 0x18, | |
98 | 0x1e, 0x1c, 0x00, 0x00, 0x1a, | |
99 | 0x20, 0x28, 0x25, 0x24, 0x26, | |
100 | 0x15, 0x13, 0x11, 0x18, 0x1e, | |
101 | 0x1c, 0x00); | |
102 | dsi_generic_write_seq(dsi, R69328_GAMMA_SET_B, 0x00, | |
103 | 0x1a, 0x20, 0x28, 0x25, 0x24, | |
104 | 0x26, 0x15, 0x13, 0x11, 0x18, | |
105 | 0x1e, 0x1c, 0x00, 0x00, 0x1a, | |
106 | 0x20, 0x28, 0x25, 0x24, 0x26, | |
107 | 0x15, 0x13, 0x11, 0x18, 0x1e, | |
108 | 0x1c, 0x00); | |
109 | dsi_generic_write_seq(dsi, R69328_GAMMA_SET_C, 0x00, | |
110 | 0x1a, 0x20, 0x28, 0x25, 0x24, | |
111 | 0x26, 0x15, 0x13, 0x11, 0x18, | |
112 | 0x1e, 0x1c, 0x00, 0x00, 0x1a, | |
113 | 0x20, 0x28, 0x25, 0x24, 0x26, | |
114 | 0x15, 0x13, 0x11, 0x18, 0x1e, | |
115 | 0x1c, 0x00); | |
116 | ||
117 | /* MACP On */ | |
118 | dsi_generic_write_seq(dsi, R69328_MACP, 0x03); | |
119 | ||
120 | ret = mipi_dsi_dcs_set_display_on(dsi); | |
121 | if (ret < 0) { | |
122 | log_err("failed to set display on: %d\n", ret); | |
123 | return ret; | |
124 | } | |
6d9b3a7e SR |
125 | mdelay(50); |
126 | ||
9970634f SR |
127 | return 0; |
128 | } | |
129 | ||
130 | static int renesas_r69328_set_backlight(struct udevice *dev, int percent) | |
131 | { | |
132 | struct renesas_r69328_priv *priv = dev_get_priv(dev); | |
133 | int ret; | |
134 | ||
6d9b3a7e SR |
135 | ret = backlight_enable(priv->backlight); |
136 | if (ret) | |
137 | return ret; | |
138 | ||
9970634f | 139 | mdelay(5); |
6d9b3a7e | 140 | |
9970634f | 141 | return backlight_set_brightness(priv->backlight, percent); |
6d9b3a7e SR |
142 | } |
143 | ||
144 | static int renesas_r69328_timings(struct udevice *dev, | |
145 | struct display_timing *timing) | |
146 | { | |
147 | memcpy(timing, &default_timing, sizeof(*timing)); | |
148 | return 0; | |
149 | } | |
150 | ||
151 | static int renesas_r69328_of_to_plat(struct udevice *dev) | |
152 | { | |
153 | struct renesas_r69328_priv *priv = dev_get_priv(dev); | |
154 | int ret; | |
155 | ||
156 | ret = uclass_get_device_by_phandle(UCLASS_PANEL_BACKLIGHT, dev, | |
157 | "backlight", &priv->backlight); | |
158 | if (ret) { | |
159 | log_err("cannot get backlight: ret = %d\n", ret); | |
160 | return ret; | |
161 | } | |
162 | ||
163 | ret = gpio_request_by_name(dev, "enable-gpios", 0, | |
164 | &priv->enable_gpio, GPIOD_IS_OUT); | |
165 | if (ret) { | |
166 | log_err("could not decode enable-gpios (%d)\n", ret); | |
167 | return ret; | |
168 | } | |
169 | ||
170 | ret = gpio_request_by_name(dev, "reset-gpios", 0, | |
171 | &priv->reset_gpio, GPIOD_IS_OUT); | |
172 | if (ret) { | |
173 | log_err("could not decode reser-gpios (%d)\n", ret); | |
174 | return ret; | |
175 | } | |
176 | ||
177 | return 0; | |
178 | } | |
179 | ||
9970634f SR |
180 | static int renesas_r69328_hw_init(struct udevice *dev) |
181 | { | |
182 | struct renesas_r69328_priv *priv = dev_get_priv(dev); | |
183 | int ret; | |
184 | ||
185 | ret = dm_gpio_set_value(&priv->enable_gpio, 1); | |
186 | if (ret) { | |
187 | log_debug("%s: error changing enable-gpios (%d)\n", | |
188 | __func__, ret); | |
189 | return ret; | |
190 | } | |
191 | mdelay(5); | |
192 | ||
193 | ret = dm_gpio_set_value(&priv->reset_gpio, 0); | |
194 | if (ret) { | |
195 | log_debug("%s: error changing reset-gpios (%d)\n", | |
196 | __func__, ret); | |
197 | return ret; | |
198 | } | |
199 | mdelay(5); | |
200 | ||
201 | ret = dm_gpio_set_value(&priv->reset_gpio, 1); | |
202 | if (ret) { | |
203 | log_debug("%s: error changing reset-gpios (%d)\n", | |
204 | __func__, ret); | |
205 | return ret; | |
206 | } | |
207 | ||
208 | mdelay(5); | |
209 | ||
210 | return 0; | |
211 | } | |
212 | ||
6d9b3a7e SR |
213 | static int renesas_r69328_probe(struct udevice *dev) |
214 | { | |
215 | struct mipi_dsi_panel_plat *plat = dev_get_plat(dev); | |
216 | ||
217 | /* fill characteristics of DSI data link */ | |
218 | plat->lanes = 4; | |
219 | plat->format = MIPI_DSI_FMT_RGB888; | |
220 | plat->mode_flags = MIPI_DSI_MODE_VIDEO; | |
221 | ||
9970634f | 222 | return renesas_r69328_hw_init(dev); |
6d9b3a7e SR |
223 | } |
224 | ||
225 | static const struct panel_ops renesas_r69328_ops = { | |
226 | .enable_backlight = renesas_r69328_enable_backlight, | |
227 | .set_backlight = renesas_r69328_set_backlight, | |
228 | .get_display_timing = renesas_r69328_timings, | |
229 | }; | |
230 | ||
231 | static const struct udevice_id renesas_r69328_ids[] = { | |
232 | { .compatible = "jdi,dx12d100vm0eaa" }, | |
233 | { } | |
234 | }; | |
235 | ||
236 | U_BOOT_DRIVER(renesas_r69328) = { | |
237 | .name = "renesas_r69328", | |
238 | .id = UCLASS_PANEL, | |
239 | .of_match = renesas_r69328_ids, | |
240 | .ops = &renesas_r69328_ops, | |
241 | .of_to_plat = renesas_r69328_of_to_plat, | |
242 | .probe = renesas_r69328_probe, | |
243 | .plat_auto = sizeof(struct mipi_dsi_panel_plat), | |
244 | .priv_auto = sizeof(struct renesas_r69328_priv), | |
245 | }; |