PR ld/15302

[thirdparty/binutils-gdb.git] / gas / ChangeLog

2013-06-13  Nick Clifton  <nickc@redhat.com>

	PR gas/15602
	* config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
	* config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
	function.  Generates an error if the adjusted offset is out of a
	16-bit range.

2013-06-12  Sandra Loosemore  <sandra@codesourcery.com>

	* config/tc-nios2.c (md_apply_fix):  Mask constant
	BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.

2013-06-10  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (append_insn): Don't do branch relaxation for
	MIPS-3D instructions either.
	(md_convert_frag): Update the COPx branch mask accordingly.

	* config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
	option.
	* doc/as.texinfo (Overview): Add --relax-branch and
	--no-relax-branch.
	* doc/c-mips.texi (MIPS Opts): Document --relax-branch and
	--no-relax-branch.

2013-06-09  Sandra Loosemore  <sandra@codesourcery.com>

	* config/tc-nios2.c (nios2_parse_args):  Allow trap argument to
	omitted.

2013-06-08  Catherine Moore  <clm@codesourcery.com>

	* config/tc-mips.c (is_opcode_valid):  Build ASE mask.
	(is_opcode_valid_16): Pass ase value to opcode_is_member.
	(append_insn): Change INSN_xxxx to ASE_xxxx.

2013-06-01  George Thomas <george.thomas@atmel.com>

        * gas/config/tc-avr.c: Change ISA for devices with USB support to
	AVR_ISA_XMEGAU

2013-05-31  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (md_begin): Don't align text/data/bss sections
	for ELF.

2013-05-31  Paul Brook  <paul@codesourcery.com>

	gas/
	* config/tc-mips.c (s_ehword): New.

2013-05-30  Paul Brook  <paul@codesourcery.com>

	* config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.

2013-05-29  Maciej W. Rozycki  <macro@codesourcery.com>

	* write.c (resolve_reloc_expr_symbols): On REL targets don't
	convert relocs who have no relocatable field either.  Rephrase
	the conditional so that the PC-relative check is only applied
	for REL targets.

2013-05-28  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* config/tc-mips.c (macro) <ld>: Don't use $zero for address
	calculation.

2013-05-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (reloc_table): Update to use
	BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of 
	BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
	(md_apply_fix): Likewise.
	(aarch64_force_relocation): Likewise.

2013-05-28  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (it_fsm_post_encode): Improve
	warning messages about deprecated IT block formats.

2013-05-28  Marcus Shawcroft  <marcus.shawcroft@arm.com>

	* config/tc-aarch64.c (md_apply_fix): Move value range checking
	inside fx_done condition.

2013-05-22  Jürgen Urban  <JuergenUrban@gmx.de>

	* config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.

2013-05-20  Peter Bergner <bergner@vnet.ibm.com>

	* config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
	and clean up warning when using PRINT_OPCODE_TABLE.

2013-05-20  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_apply_fix): Hoist code common to insn
	and data fixups performing shift/high adjust/sign extension on
	fieldval.  Sink fx_pcrel handling and checks.  Use fixP->fx_size
	when writing data fixups rather than recalculating size.

2013-05-16  Jan-Benedict Glaw  <jbglaw@lug-owl.de>

	* doc/c-msp430.texi: Fix typo.

2013-05-16  Tristan Gingold  <gingold@adacore.com>

	* config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
	are also TOC symbols.

2013-05-16  Nick Clifton  <nickc@redhat.com>

	* config/tc-msp430.c: Make -mmcu recognise more part numbers.
	Add -mcpu command to specify core type.
	* doc/c-msp430.texi: Update documentation.

2013-05-09  Andrew Pinski  <apinski@cavium.com>

	* config/tc-mips.c (struct mips_set_options): New ase_virt field.
	(mips_opts): Update for the new field.
	(file_ase_virt): New variable.
	(ISA_SUPPORTS_VIRT_ASE): New macro.
	(ISA_SUPPORTS_VIRT64_ASE): New macro.
	(MIPS_CPU_ASE_VIRT): New define.
	(is_opcode_valid): Handle ase_virt.
	(macro_build): Handle "+J".
	(validate_mips_insn): Likewise.
	(mips_ip): Likewise.
	(enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
	(md_longopts): Add mvirt and mnovirt
	(md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
	(mips_after_parse_args): Handle ase_virt field.
	(s_mipsset): Handle "virt" and "novirt".
	(mips_elf_final_processing): Add a comment about virt ASE might need
	a new flag.
	(md_show_usage): Print out the usage of -mvirt and mno-virt options.
	* doc/c-mips.texi: Document -mvirt and -mno-virt.
	Document ".set virt" and ".set novirt".

2013-05-09  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
	control of operand flag bits.

2013-05-07  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
	(PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
	(PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
	(PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
	(md_apply_fix): Set fx_no_overflow for assorted relocations.
	Shift and sign-extend fieldval for use by some VLE reloc
	operand->insert functions.

2013-05-06  Paul Brook  <paul@codesourcery.com>
	    Catherine Moore  <clm@codesourcery.com>

	* config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
	(limited_pcrel_reloc_p): Likewise.
	(md_apply_fix): Likewise.
	(tc_gen_reloc): Likewise.

2013-05-06  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (limited_pcrel_reloc_p): New function.
	(mips_fix_adjustable): Adjust pc-relative check to use
	limited_pc_reloc_p.

2013-05-02  Richard Sandiford  <rdsandiford@googlemail.com>

	* config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
	(s_mips_stab): Do not restrict to stabn only.

2013-05-02  Nick Clifton  <nickc@redhat.com>

	* config/tc-msp430.c: Add support for the MSP430X architecture.
	Add code to insert a NOP instruction after any instruction that
	might change the interrupt state.
	Add support for the LARGE memory model.
	Add code to initialise the .MSP430.attributes section.
	* config/tc-msp430.h: Add support for the MSP430X architecture.
	* doc/c-msp430.texi: Document the new -mL and -mN command line
	options.
	* NEWS: Mention support for the MSP430X architecture.

2013-05-01  Maciej W. Rozycki  <macro@codesourcery.com>

	* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
	alpha*-*-linux*ecoff*.

2013-04-30  Chao-ying Fu  <Chao-ying.Fu@imgtec.com>

	* config/tc-mips.c (mips_ip): Add sizelo.
	For "+C", "+G", and "+H", set sizelo and compare against it.

2013-04-29  Nick Clifton  <nickc@redhat.com>

	* as.c (Options): Add -gdwarf-sections.
	(parse_args): Likewise.
	* as.h (flag_dwarf_sections): Declare.
	* dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
	(process_entries): When -gdwarf-sections is enabled generate
	fragmentary .debug_line sections.
	(out_debug_line): Set the section for the .debug_line section end
	symbol.
	* doc/as.texinfo: Document -gdwarf-sections.
	* NEWS: Mention -gdwarf-sections.

2013-04-26  Christian Groessler  <chris@groessler.org>

	* config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
	according to the target parameter.  Don't call s_segm since s_segm
	calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
	initialized yet.
	(md_begin): Call s_segm according to target parameter from command
	line.

2013-04-25  Alan Modra  <amodra@gmail.com>

	* configure.in: Allow little-endian linux.
	* configure: Regenerate.

2013-04-24  Sandra Loosemore  <sandra@codesourcery.com>

	* config/tc-nios2.c (nios2_control_register_arg_p): Rename
	"fstatus" control register to "eccinj".

2013-04-19  Kai Tietz  <ktietz@redhat.com>

	* configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.

2013-04-15  Julian Brown  <julian@codesourcery.com>

	* expr.c (add_to_result, subtract_from_result): Make global.
	* expr.h (add_to_result, subtract_from_result): Add prototypes.
	* config/tc-sh.c (sh_optimize_expr): Use add_to_result,
	subtract_from_result to handle extra bit of precision for .sleb128
	directive operands.

2013-04-10  Julian Brown  <julian@codesourcery.com>

	* read.c (convert_to_bignum): Add sign parameter. Use it
	instead of X_unsigned to determine sign of resulting bignum.
	(emit_expr): Pass extra argument to convert_to_bignum.
	(emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
	X_extrabit to convert_to_bignum.
	(parse_bitfield_cons): Set X_extrabit.
	* expr.c (make_expr_symbol, expr_build_uconstant, operand):
	Initialise X_extrabit field as appropriate.
	(add_to_result): New.
	(subtract_from_result): New.
	(expr): Use above.
	* expr.h (expressionS): Add X_extrabit field.

2013-04-10  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
	register being PC when is_t or writeback, and use distinct
	diagnostic for the latter case.

2013-04-10  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (parse_operands): Re-write
	po_barrier_or_imm().
	(do_barrier): Remove bogus constraint().
	(do_t_barrier): Remove.

2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>

	* gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
	ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
	ATmega2564RFR2
	* gas/doc/c-avr.texi (-mmcu documentation): Likewise.

2013-04-09  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_vmrs): Accept all control registers.
	Use local variable Rt in more places.
	(do_vmsr): Accept all control registers.

2013-04-09  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
	if there was none specified for moves between scalar and core
	register.

2013-04-09  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
	NEON_ALL_LANES case.

2013-04-08  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
	PC-relative VSTR.

2013-04-08  Jan Beulich <jbeulich@suse.com>

	* gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
	entry to sp_fiq.

2013-04-03  Alan Modra  <amodra@gmail.com>

	* doc/as.texinfo: Add support to generate man options for h8300.
	* doc/c-h8300.texi: Likewise.

2013-03-28  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
	Cortex-A57.

2013-03-27  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR binutils/15068
	* config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.

2013-03-26  Nick Clifton  <nickc@redhat.com>

	PR gas/15295
	* listing.c (rebuffer_line): Rewrite to avoid seeking back to the
	start of the file each time.

	PR gas/15178
	* config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
	FreeBSD targets.

2013-03-26  Douglas B Rupp  <rupp@gnat.com>

	* config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
	after fixup.

2013-03-21  Will Newton  <will.newton@linaro.org>

	* config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
	pc-relative str instructions in Thumb mode.

2013-03-21  Michael Schewe  <michael.schewe@gmx.net>

	* config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
	@(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
	R_H8_DISP32A16.
	* config/tc-h8300.h: Remove duplicated defines.

2013-03-21  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>

	PR gas/15282
	* tc-avr.c (mcu_has_3_byte_pc): New function.
	(tc_cfi_frame_initial_instructions): Call it to find return
	address size.

2013-03-20  Alexis Deruelle  <alexis.deruelle@gmail.com>

	PR gas/15095
	* config/tc-tic6x.c (tic6x_try_encode): Handle
	tic6x_coding_dreg_(msb|lsb) field coding types and use it to
	encode register pair numbers when required.

2013-03-15  Will Newton  <will.newton@linaro.org>

	* config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
	in vstr in Thumb mode for pre-ARMv7 cores.

2013-03-14  Andreas Schwab  <schwab@suse.de>

	* doc/c-arc.texi (ARC Directives): Revert last change and use
	@itemize instead of @table.
	* doc/c-arm.texi (ARM-Instruction-Set): Likewise.

2013-03-14  Nick Clifton  <nickc@redhat.com>

	PR gas/15273
	* config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
	NULL message, instead just check ARM_CPU_IS_ANY directly.

2013-03-14  Nick Clifton  <nickc@redhat.com>

	PR gas/15212
	* doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
	for table format.
	* doc/c-arm.texi (ARM-Instruction-Set): Likewise.  Also add text
	to the @item directives.
	(ARM-Neon-Alignment): Move to correct place in the document.
	* doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
	formatting.
	* doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
	@smallexample.

2013-03-12  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* config/tc-nios2.c (nios2_consume_arg): Delete 'k' case.  Add 'o'
	case.  Add default BAD_CASE to switch.

2013-03-11  Sebastian Huber <sebastian.huber@embedded-brains.de>

	* config/tc-nios2.c (nios2_assemble_args_ds): New function.
	(nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.

2013-03-11  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (crc_ext_armv8): New feature set.
	(UNPRED_REG): New macro.
	(do_crc32_1): New function.
	(do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
	do_crc32ch, do_crc32cw): Likewise.
	(TUEc): New macro.
	(insns): Add entries for crc32 mnemonics.
	(arm_extensions): Add entry for crc.

2013-03-08  Chung-Lin Tang  <cltang@codesourcery.com>

	* write.h (struct fix): Add fx_dot_frag field.
	(dot_frag): Declare.
	* write.c (dot_frag): New variable.
	(fix_new_internal): Set fx_dot_frag field with dot_frag.
	(fixup_segment): Base calculation of fx_offset with fx_dot_frag.
	* expr.c (expr): Save value of frag_now in dot_frag when setting
	dot_value.
	* read.c (emit_expr): Likewise. Delete comments.

2013-03-07  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (flag_code_names): Removed.
	(i386_index_check): Rewrote.

2013-03-05  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
	add comment.
	(aarch64_double_precision_fmovable): New function.
	(parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
	function; handle hexadecimal representation of IEEE754 encoding.
	(parse_operands): Update the call to parse_aarch64_imm_float.

2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
	(check_hle): Updated.
	(md_assemble): Likewise.
	(parse_insn): Likewise.

2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (_i386_insn): Add rep_prefix.
	(md_assemble): Check if REP prefix is OK.
	(parse_insn): Remove expecting_string_instruction.  Set
	i.rep_prefix.

2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (aarch64_features): Add the 'crc' option.

2013-02-28  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
	for system registers.

2013-02-27  DJ Delorie  <dj@redhat.com>

	* config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
	(rl78_op): Handle %code().
	(rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
	(tc_gen_reloc): Likwise; convert to a computed reloc.
	(md_apply_fix): Likewise.

2013-02-25  Kaushik Phatak  <Kaushik.Phatak@kpitcummins.com>

	* config/rl78-parse.y: Fix encoding of DIVWU insn.

2013-02-25  Terry Guo  <terry.guo@arm.com>

	* config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
	* doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
	list of accepted CPUs.

2013-02-19  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/15159
	* config/tc-i386.c (cpu_arch): Add ".smap".

	* doc/c-i386.texi: Document smap.

2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (s_cpload): Call mips_mark_labels and set
	mips_assembling_insn appropriately.
	(s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.

2013-02-18  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (append_insn): Correct indentation, remove
	extraneous braces.

2013-02-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/tc-arm.c (do_neon_mov): Break on NS_NULL.

2013-02-15  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* configure.tgt: Add nios2-*-rtems*.

2013-02-14  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (md_begin): Change to check if 'name' is
	NULL.

2013-02-09  Jürgen Urban  <JuergenUrban@gmx.de>

	* config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
	(macro): Use it.  Assert that trunc.w.s is not used for r5900.

2013-02-08  Yi-Hsiu, Hsu  <ahsu@marvell.com>

	* gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
	core.

2013-02-06  Sandra Loosemore  <sandra@codesourcery.com>
	    Andrew Jenner <andrew@codesourcery.com>

	Based on patches from Altera Corporation.

	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
	(TARGET_CPU_HFILES): Add config/tc-nios2.h.
	* Makefile.in: Regenerated.
	* configure.tgt: Add case for nios2*-linux*.
	* config/obj-elf.c: Conditionally include elf/nios2.h.
	* config/tc-nios2.c: New file.
	* config/tc-nios2.h: New file.
	* doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
	* doc/Makefile.in: Regenerated.
	* doc/all.texi: Set NIOSII.
	* doc/as.texinfo (Overview): Add Nios II options.
	(Machine Dependencies): Include c-nios2.texi.
	* doc/c-nios2.texi: New file.
	* NEWS: Note Altera Nios II support.

2013-02-06  Alan Modra  <amodra@gmail.com>

	PR gas/14255
	* config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
	Don't skip fixups with fx_subsy non-NULL.
	* config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
	with fx_subsy non-NULL.

2013-02-04  H.J. Lu  <hongjiu.lu@intel.com>

	* doc/c-metag.texi: Add "@c man" markers.

2013-02-04  Alan Modra  <amodra@gmail.com>

	* write.c (fixup_segment): Return void.  Delete seg_reloc_count
	related code.
	(TC_ADJUST_RELOC_COUNT): Delete.
	* config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.

2013-02-04  Alan Modra  <amodra@gmail.com>

	* po/POTFILES.in: Regenerate.

2013-01-30  Markos Chandras  <markos.chandras@imgtec.com>

	* config/tc-metag.c: Make SWAP instruction less permissive with
	its operands.

2013-01-29  DJ Delorie  <dj@redhat.com>

	* config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
	relocs in .word/.etc statements.

2013-01-29  Roland McGrath  <mcgrathr@google.com>

	* config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
	immediate value for 8-bit offset" error so it shows line info.

2013-01-24  Joseph Myers  <joseph@codesourcery.com>

	* config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
	for 64-bit output.

2013-01-24  Nick Clifton  <nickc@redhat.com>

	* config/tc-v850.c: Add support for e3v5 architecture.
	* doc/c-v850.texi: Mention new support.

2013-01-23  Nick Clifton  <nickc@redhat.com>

	PR gas/15039
	* config/tc-avr.c: Include dwarf2dbg.h.

2013-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (reloc): Support size relocation only for ELF.
	(tc_i386_fix_adjustable): Likewise.
	(lex_got): Likewise.
	(tc_gen_reloc): Likewise.

2013-01-17  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (output_operand_error_record): Change to output
	the out-of-range error message as value-expected message if there is
	only one single value in the expected range.
	(programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
	LSL #0 as a programmer-friendly feature.

2013-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
	(tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
	BFD_RELOC_64_SIZE relocations.
	(lex_got): Support "symbol@SIZE" and don't create GOT symbol
	for it.
	(tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
	relocations against local symbols.

2013-01-16  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
	finding some sort of toc syntax error, and break to avoid
	compiler uninit warning.

2013-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/15019
	* config/tc-i386.c (lex_got): Increment length by 1 if the
	relocation token is removed.

2013-01-15  Nick Clifton  <nickc@redhat.com>

	* config/tc-v850.c (md_assemble): Allow signed values for
	V850E_IMMEDIATE.

2013-01-11  Sean Keys  <skeys@ipdatasys.com>

	* config/tc-xgate.c (md_begin): Fix mistake made when going from
	git to cvs.

2013-01-10  Peter Bergner <bergner@vnet.ibm.com>

	* doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
	* doc/c-ppc.texi (PowerPC-Opts):  Likewise.
	* config/tc-ppc.c (md_show_usage): Likewise.
	(ppc_handle_align): Handle power8's group ending nop.

2013-01-10  Sean Keys  <skeys@ipdatasys.com>

	* config/tc-xgate.c (md_begin): Fix the printing of opcodes so
	that the assember exits after the opcodes have been printed.

2013-01-10  H.J. Lu  <hongjiu.lu@intel.com>

	* app.c: Remove trailing white spaces.
	* as.c: Likewise.
	* as.h: Likewise.
	* cond.c: Likewise.
	* dw2gencfi.c: Likewise.
	* dwarf2dbg.h: Likewise.
	* ecoff.c: Likewise.
	* input-file.c: Likewise.
	* itbl-lex.h: Likewise.
	* output-file.c: Likewise.
	* read.c: Likewise.
	* sb.c: Likewise.
	* subsegs.c: Likewise.
	* symbols.c: Likewise.
	* write.c: Likewise.
	* config/tc-i386.c: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/Makefile.in: Likewise.
	* doc/c-aarch64.texi: Likewise.
	* doc/c-alpha.texi: Likewise.
	* doc/c-arc.texi: Likewise.
	* doc/c-arm.texi: Likewise.
	* doc/c-avr.texi: Likewise.
	* doc/c-bfin.texi: Likewise.
	* doc/c-cr16.texi: Likewise.
	* doc/c-d10v.texi: Likewise.
	* doc/c-d30v.texi: Likewise.
	* doc/c-h8300.texi: Likewise.
	* doc/c-hppa.texi: Likewise.
	* doc/c-i370.texi: Likewise.
	* doc/c-i386.texi: Likewise.
	* doc/c-i860.texi: Likewise.
	* doc/c-m32c.texi: Likewise.
	* doc/c-m32r.texi: Likewise.
	* doc/c-m68hc11.texi: Likewise.
	* doc/c-m68k.texi: Likewise.
	* doc/c-microblaze.texi: Likewise.
	* doc/c-mips.texi: Likewise.
	* doc/c-msp430.texi: Likewise.
	* doc/c-mt.texi: Likewise.
	* doc/c-s390.texi: Likewise.
	* doc/c-score.texi: Likewise.
	* doc/c-sh.texi: Likewise.
	* doc/c-sh64.texi: Likewise.
	* doc/c-tic54x.texi: Likewise.
	* doc/c-tic6x.texi: Likewise.
	* doc/c-v850.texi: Likewise.
	* doc/c-xc16x.texi: Likewise.
	* doc/c-xgate.texi: Likewise.
	* doc/c-xtensa.texi: Likewise.
	* doc/c-z80.texi: Likewise.
	* doc/internals.texi: Likewise.

2013-01-10  Roland McGrath  <mcgrathr@google.com>

	* hash.c (hash_new_sized): Make it global.
	* hash.h: Declare it.
	* macro.c (define_macro): Use hash_new_sized instead of hash_new,
	pass a small size.

2013-01-10  Will Newton <will.newton@imgtec.com>

	* Makefile.am: Add Meta.
	* Makefile.in: Regenerate.
	* config/tc-metag.c: New file.
	* config/tc-metag.h: New file.
	* configure.tgt: Add Meta.
	* doc/Makefile.am: Add Meta.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi: Add Meta.
	* doc/as.texiinfo: Document Meta options.
	* doc/c-metag.texi: New file.

2013-01-09  Steve Ellcey  <sellcey@mips.com>

	* config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
	calls.
	* config/tc-mips.c (internalError): Remove, replace with abort.

2013-01-08  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (parse_operands): Change to compare the result
	of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.

2013-01-07  Nick Clifton  <nickc@redhat.com>

	PR gas/14887
	* config/tc-arm.c (skip_past_char): Skip whitespace before the
	anticipated character.
	* config/tc-arm.c (parse_address_main): Delete skip of whitespace
	here as it is no longer needed.

2013-01-06  Andreas Schwab  <schwab@linux-m68k.org>

	* doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
	* doc/c-score.texi (SCORE-Opts): Likewise.
	* doc/c-tic54x.texi (TIC54X-Directives): Likewise.

2013-01-04  Juergen Urban <JuergenUrban@gmx.de>

	* config/tc-mips.c: Add support for MIPS r5900.
	Add M_LQ_AB and M_SQ_AB to support large values for instructions
	lq and sq.
	(can_swap_branch_p, get_append_method): Detect some conditional
	short loops to fix a bug on the r5900 by NOP in the branch delay
	slot.
	(M_MUL): Support 3 operands in multu on r5900.
	(M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
	(s_mipsset): Force 32 bit floating point on r5900.
	(mips_ip): Check parameter range of instructions mfps and mtps on
	r5900.
	* configure.in: Detect CPU type when target string contains r5900
	(e.g. mips64r5900el-linux-gnu).

2013-01-02  H.J. Lu  <hongjiu.lu@intel.com>

	* as.c (parse_args): Update copyright year to 2013.

2013-01-02  Yufeng Zhang  <yufeng.zhang@arm.com>

	* config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
	and "cortex57".

2013-01-02  Nick Clifton  <nickc@redhat.com>

	PR gas/14987
	* config/tc-arm.c (parse_address_main): Skip whitespace before a
	closing bracket.

For older changes see ChangeLog-2012
\f
Copyright (C) 2013 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: