[thirdparty/binutils-gdb.git] / gas / ChangeLog

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
	register to use.
	(RELAX_BRANCH_UNCOND): Adjust accordingly.
	(RELAX_BRANCH_LIKELY): Likewise.
	(RELAX_BRANCH_LINK): Likewise.
	(RELAX_BRANCH_TOOFAR): Likewise.
	(RELAX_BRANCH_AT): New macro.
	(append_insn): Encode the temporary register to use in standard
	MIPS branch relaxation.
	(relaxed_branch_length): Update according to changes to
	RELAX_BRANCH_ENCODE.
	(md_convert_frag): Use the encoded register as the temporary.

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (mips_fix_adjustable): On REL targets also
	reject PC-relative relocations.

2011-02-28  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (md_convert_frag): Correct message
	capitalization.

2011-02-28  Alan Modra  <amodra@gmail.com>

	* symbols.c (report_op_error): Remove unnecessary forward declaration.
	Add "op" parameter.  Report operator and operand segments in error
	message, not operand symbols.
	(resolve_symbol_value): Always set segment for equated symbols, not
	just when finalizing.  Adjust report_op_error calls.

2011-02-25  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
	if 64bit relocations aren't allowed.

2011-02-25  Alan Modra  <amodra@gmail.com>

	PR gas/12519
	* config/obj-elf.c (elf_frob_symbol): Properly handle size expression.

2011-02-21  Maciej W. Rozycki  <macro@codesourcery.com>

	* config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
	initialization of offset_reloc.

2011-02-15  Richard Henderson  <rth@redhat.com>

	* dw2gencfi.c (dot_cfi_dummy): New.
	(cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
	* read.c (pobegin): Unconditionally call cfi_pop_insert.

2011-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>

	* configure: Regenerate.

2011-02-13  Mike Frysinger  <vapier@gentoo.org>

	* config/bfin-lex.l (BYTEOP2M): Remove tokenization.
	* config/bfin-parse.y (BYTEOP2M): Delete token.
	(asm_1): Remove BYTEOP2M insn matching.

2011-02-12  Mike Frysinger  <vapier@gentoo.org>

	* config/bfin-defs.h: Include opcode/bfin.h.
	(M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.

2011-02-11  Mike Frysinger  <vapier@gentoo.org>

	* doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
	(Modify Registers): Fix subtracted typo.
	(.byte2): Extend and swap descriptions with .byte4.
	(.byte4): Extend and swap descriptions with .byte2.
	(.db, .dw, .dd): Document behavior.

2011-02-11  Mike Frysinger  <vapier@gentoo.org>

	* config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.

2011-02-11  Alan Modra  <amodra@gmail.com>

	* doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.

2011-02-10  Alan Modra  <amodra@gmail.com>

	* doc/as.texinfo (Overview): Add missing markup around Blackfin
	and PowerPC options.

2011-02-10  Alan Modra  <amodra@gmail.com>

	* config/tc-ppc.c (md_show_usage): Remove -l and -b.  Add -K PIC.
	* doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
	(Overview <Target PowerPC options>): Add a number of missing options.
	* doc/c-ppc.texi: Likewise.  Add markup for use in manpage generation.

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/6957
	* config/tc-i386.c (i386_align_code): Use f32_patt when tuning
	for i686.

2011-02-08  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
	for ISA extensions.
	(md_parse_option): Likewise.

2011-02-04  Bernd Schmidt  <bernds@codesourcery.com>

	* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
	* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
	(TIC6X Options): Don't mention "-matomic".
	* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
	(md_longopts): Remove corresponding entries.
	(md_parse_option): Don't handle them.
	(md_show_usage): Don't document them.
	(tic6x_atomic): Delete variable.
	(tic6x_update_features): Always copy tic6x_arch_enable to
	tic6x_features.
	(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
	(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
	(md_pseudo_table): Remove ".atomic" and ".noatomic".

2011-01-31  Nick Clifton  <nickc@redhat.com>

	* write.c (write_contents): Include output file name and bfd error
	value when reporting the inability to write to the output file.
	* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
	frag that has a non-zero fill value.

2011-01-27  DJ Delorie  <dj@redhat.com>

	* config/tc-rx.c (md_convert_frag): If we can't compute the target
	address, zero out the values stored in the object file to make
	objdump's output consistent.

2011-01-26  Kai Tietz  <kai.tietz@onevision.com>

	* config/tc-i386.c (md_begin): Set for x64 windows COFF target
	x86_dwarf2_return_column to 32.

2011-01-20  Nick Clifton  <nickc@redhat.com>

	PR gas/12384
	* config/tc-h8300.c (constant_fits_width_p): Use correct type for
	comparison.

2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	* write.c (compress_debug): Return if section size is smaller
	than 32 bytes.

2011-01-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/12409
	* write.c (compress_debug): Return if section size is 0.

2011-01-18  Mingfeng Wu  <mingfeng@faraday-tech.com>

	* config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
	cores: fa606te, fa616te, fmp626.  Modify the VFP of fa626te.
	* doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
	fmp626} options.

2011-01-18  Nick Clifton  <nickc@redhat.com>

	PR gas/12390
	* doc/all.texi: Add NS32K
	* doc/as.texinfo: Remove target specific details of which
	characters act as comment initiators and statement separators into
	individual target specific files.
	* doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
	the hash character at the start of a line.
	* doc/c-arm.texi (ARM-Chars): Likewise.
	* doc/c-avr.texi (AVR-Chars): Likewise.
	* doc/c-d10v.texi (D10V-Chars): Likewise.
	* doc/c-d30v.texi (D30V-Chars):	Likewise.
	* doc/c-mmix.texi (MMIX-Chars): Likewise.
	* doc/c-s390.texi (s390 characters): Likewise.
	* doc/c-sh.texi (SH-Chars): Likewise.
	* doc/c-sh64.texi (SH64-Chars): Likewise.
	* doc/c-sparc.texi (SPARC-Chars): Likewise.
	* doc/c-tic6x.texi (TIC6X Syntax): Likewise.
	* doc/c-xtensa.texi (Xtensa Syntax): Likewise.
	* doc/c-z80.texi (Z80-Chars): Likewise.
	* doc/c-z8k.texi (Z8000-Chars): Likewise.
	* doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
	* doc/c-arc.texi (ARC-Chars): Fill in this subsection.
	* doc/c-bfin.texi (Blackfin Syntax): Document line comment and
	line separator characters.
	* doc/c-cr16.texi (CR16 Syntax): Likewise.
	* doc/c-i386.texi (i386-Chars): Likewise.
	* doc/c-i860.texi (i860-Chars):	Likewise.
	* doc/c-i960.texi (i960-Chars):	Likewise.
	* doc/c-ip2k.texi (IP2K-Chars):	Likewise.
	* doc/c-lm32.texi (LM32-Chars):	likewise.
	* doc/c-m32c.texi (M32C-Chars): Likewise.
	* doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
	* doc/c-m68k.texi (M68K-Chars): Likewise.
	* doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
	* doc/c-msp430.texi (MSP430-Chars): Likewise.
	* doc/c-mt.texi (MT-Chars): Likewise.
	* doc/c-ns32k.texi (NS32K-Chars): Likewise.
	* doc/c-pj.texi (PJ-Chars): Likewise.
	* doc/c-ppc.texi (PowerPC-Chars): Likewise.
	* doc/c-rx.texi (RX-Chars): Likewise.
	* doc/c-score.texi (SCORE-Chars): Likewise.
	* doc/c-tic54x.texi (TIC54X-Chars): Likewise.
	* doc/c-v850.texi (V850-Chars): Likewise.
	* doc/c-vax.texi (VAX-Chars): Likewise.
	* doc/c-xc16x.texi (xc16x-Chars): Likewise.

2011-01-17  Quentin Neill  <quentin.neill@amd.com>

	* config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.

	* doc/c-i386.texi (i386-TBM): New section.

2011-01-16  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (disallow_64bit_disp): Renamed to ...
	(disallow_64bit_reloc): This.
	(md_assemble): Don't check movabs for x32 mode here.
	(i386_target_format): Updated.
	(tc_gen_reloc): Check if 64bit relocations are allowed.

2011-01-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (disallow_64bit_disp): New.
	(x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
	X86_64_ABI/X86_64_X32_ABI.
	(md_assemble): Don't allow movabs with relocation in x32 mode.
	(i386_target_format): Updated.

2011-01-14  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (OPTION_N32): Renamed to ...
	(OPTION_X32): This.
	(md_longopts): Replace n32 with x32.
	(md_parse_option): Updated.
	(md_show_usage): Likewise.

	* doc/c-i386.texi: Replace --n32 with --x32.

2011-01-11  Mingjie Xing  <mingjie.xing@gmail.com>

	* config/tc-mips.c (mips_ip): Update error messages.  Take an
	unadjusted offset for "+c" argument.

2011-01-10  Nick Clifton  <nickc@redhat.com>

	* config/tc-i386.c (x86_elf_abi): Only define for targets that use
	it.

2011-01-10  Nick Clifton  <nickc@redhat.com>

	* config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
	part of the file.

2011-01-10  Nathan Sidwell  <nathan@codesourcery.com>
	    Glauber de Oliveira Costa  <glommer@gmail.com>

	* doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
	.tlsdescseq directive.
	* config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
	following a symbol.
	(s_arm_tls_descseq): New directive.
	(md_pseudo_table): Add it.
	(encode_branch): Allow TLS_CALL relocs too.
	(do_t_blx, do_t_branch23): Use encode_branch.
	(reloc_names): Add tlsdesc and tlscall.
	(md_apply_fix): Process tls desc relocations.
	(tc_gen_reloc): Likewise.
	(arm_fix_adjustable): Likewise.

2011-01-07  Quentin Neill  <quentin.neill@amd.com>

	* config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.

	* doc/c-i386.texi (i386-BMI): New section.

2011-01-06  Paul Koning  <ni1d@arrl.net>

	* config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
	references to absolute addresses.

2011-01-05  DJ Delorie  <dj@redhat.com>

	* config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
	instead of an RH_NEG32 one.

2011-01-05  Jonathan Wakely  <jwakely.gcc@gmail.com>

	* doc/c-i386.texi: Clarify --n32.

2011-01-04  H.J. Lu  <hongjiu.lu@intel.com>

	* config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
	integer registers in VEX.vvvv.  Check register-only source
	operand when two source operands are swapped.  Properly update
	destination when two source operands are swapped.

2011-01-01  H.J. Lu  <hongjiu.lu@intel.com>

	* gas.c (parse_args): Update copyright to 2011.

For older changes see ChangeLog-2010
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
Commit	Line	Data
66b3e8da MR	1	2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
	2
	3	* config/tc-mips.c (RELAX_BRANCH_ENCODE): Encode the temporary
	4	register to use.
	5	(RELAX_BRANCH_UNCOND): Adjust accordingly.
	6	(RELAX_BRANCH_LIKELY): Likewise.
	7	(RELAX_BRANCH_LINK): Likewise.
	8	(RELAX_BRANCH_TOOFAR): Likewise.
	9	(RELAX_BRANCH_AT): New macro.
	10	(append_insn): Encode the temporary register to use in standard
	11	MIPS branch relaxation.
	12	(relaxed_branch_length): Update according to changes to
	13	RELAX_BRANCH_ENCODE.
	14	(md_convert_frag): Use the encoded register as the temporary.
	15
ce70d90a MR	16	2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
	17
	18	* config/tc-mips.c (mips_fix_adjustable): On REL targets also
	19	reject PC-relative relocations.
	20
5c4f07ba MR	21	2011-02-28 Maciej W. Rozycki <macro@codesourcery.com>
	22
	23	* config/tc-mips.c (md_convert_frag): Correct message
	24	capitalization.
	25
5a0ade8b AM	26	2011-02-28 Alan Modra <amodra@gmail.com>
	27
	28	* symbols.c (report_op_error): Remove unnecessary forward declaration.
	29	Add "op" parameter. Report operator and operand segments in error
	30	message, not operand symbols.
	31	(resolve_symbol_value): Always set segment for equated symbols, not
	32	just when finalizing. Adjust report_op_error calls.
	33
f2d8a97c L	34	2011-02-25 H.J. Lu <hongjiu.lu@intel.com>
f2d8a97c L	35
7f648587 L	36	* config/tc-i386.c (reloc): Don't sign-check 4-byte relocations
7f648587 L	37	if 64bit relocations aren't allowed.
f2d8a97c	38
e1e90034 AM	39	2011-02-25 Alan Modra <amodra@gmail.com>
	40
	41	PR gas/12519
	42	* config/obj-elf.c (elf_frob_symbol): Properly handle size expression.
	43
dfa58db1 MR	44	2011-02-21 Maciej W. Rozycki <macro@codesourcery.com>
	45
	46	* config/tc-mips.c (mips_ip) <'o'>: Remove duplicate
	47	initialization of offset_reloc.
	48
d58a1929 RH	49	2011-02-15 Richard Henderson <rth@redhat.com>
	50
	51	* dw2gencfi.c (dot_cfi_dummy): New.
	52	(cfi_pseudo_table) [!TARGET_USE_CFIPOP]: New.
	53	* read.c (pobegin): Unconditionally call cfi_pop_insert.
	54
822ce8ee RW	55	2011-02-13 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
	56
	57	* configure: Regenerate.
	58
36f44611 MF	59	2011-02-13 Mike Frysinger <vapier@gentoo.org>
	60
	61	* config/bfin-lex.l (BYTEOP2M): Remove tokenization.
	62	* config/bfin-parse.y (BYTEOP2M): Delete token.
	63	(asm_1): Remove BYTEOP2M insn matching.
	64
26bb3ddd MF	65	2011-02-12 Mike Frysinger <vapier@gentoo.org>
	66
	67	* config/bfin-defs.h: Include opcode/bfin.h.
	68	(M_S2RND, M_T, M_W32, M_FU, M_TFU, M_IS, M_ISS2, M_IH, M_IU): Delete.
	69
347d120a MF	70	2011-02-11 Mike Frysinger <vapier@gentoo.org>
	71
	72	* doc/c-bfin.texi (Instruction Delimiting): Fix occur typo.
	73	(Modify Registers): Fix subtracted typo.
	74	(.byte2): Extend and swap descriptions with .byte4.
	75	(.byte4): Extend and swap descriptions with .byte2.
	76	(.db, .dw, .dd): Document behavior.
	77
5f956293 MF	78	2011-02-11 Mike Frysinger <vapier@gentoo.org>
	79
	80	* config/bfin-parse.y (TESTSET): Reject REG_SP and REG_FP.
	81
c0e524fe AM	82	2011-02-11 Alan Modra <amodra@gmail.com>
	83
	84	* doc/c-ppc.texi (PowerPC-Opts <-nops>): Clarify.
	85
635fb38d AM	86	2011-02-10 Alan Modra <amodra@gmail.com>
	87
	88	* doc/as.texinfo (Overview): Add missing markup around Blackfin
	89	and PowerPC options.
	90
b8b738ac AM	91	2011-02-10 Alan Modra <amodra@gmail.com>
	92
	93	* config/tc-ppc.c (md_show_usage): Remove -l and -b. Add -K PIC.
	94	* doc/as.texinfo: Refer to and include c-ppc.texi for PowerPC options.
	95	(Overview <Target PowerPC options>): Add a number of missing options.
	96	* doc/c-ppc.texi: Likewise. Add markup for use in manpage generation.
	97
2dde1948 L	98	2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
	99
	100	PR gas/6957
	101	* config/tc-i386.c (i386_align_code): Use f32_patt when tuning
	102	for i686.
	103
a586129e L	104	2011-02-08 H.J. Lu <hongjiu.lu@intel.com>
	105
	106	* config/tc-i386.c (set_cpu_arch): Also update cpu_arch_isa_flags
	107	for ISA extensions.
	108	(md_parse_option): Likewise.
	109
98d23bef BS	110	2011-02-04 Bernd Schmidt <bernds@codesourcery.com>
	111
	112	* doc/as.texinfo (Target TIC6X options): Don't mention "-matomic".
	113	* doc/c-tic6x.texi (TIC6X Directives): Don't mention ".atomic".
	114	(TIC6X Options): Don't mention "-matomic".
	115	* config/tc-tic6x.c (OPTION_MATOMIC, OPTION_MNO_ATOMIC): Delete.
	116	(md_longopts): Remove corresponding entries.
	117	(md_parse_option): Don't handle them.
	118	(md_show_usage): Don't document them.
	119	(tic6x_atomic): Delete variable.
	120	(tic6x_update_features): Always copy tic6x_arch_enable to
	121	tic6x_features.
	122	(tic6x_arch_enable): Remove references to TIC6X_INSN_ATOMIC.
	123	(s_tic6x_atomic, s_tic6x_noatomic): Remove functions.
	124	(md_pseudo_table): Remove ".atomic" and ".noatomic".
	125
a22429b9 NC	126	2011-01-31 Nick Clifton <nickc@redhat.com>
	127
	128	* write.c (write_contents): Include output file name and bfd error
	129	value when reporting the inability to write to the output file.
	130	* config/tc-rx.c (rx_handle_align): Do not insert NOPs into align
	131	frag that has a non-zero fill value.
	132
eb6fae19 DD	133	2011-01-27 DJ Delorie <dj@redhat.com>
	134
	135	* config/tc-rx.c (md_convert_frag): If we can't compute the target
	136	address, zero out the values stored in the object file to make
	137	objdump's output consistent.
	138
ca19b261 KT	139	2011-01-26 Kai Tietz <kai.tietz@onevision.com>
	140
	141	* config/tc-i386.c (md_begin): Set for x64 windows COFF target
	142	x86_dwarf2_return_column to 32.
	143
b37a4e79 NC	144	2011-01-20 Nick Clifton <nickc@redhat.com>
	145
	146	PR gas/12384
	147	* config/tc-h8300.c (constant_fits_width_p): Use correct type for
	148	comparison.
	149
6ac88ef3 L	150	2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
	151
	152	* write.c (compress_debug): Return if section size is smaller
	153	than 32 bytes.
	154
24a2d04d L	155	2011-01-18 H.J. Lu <hongjiu.lu@intel.com>
	156
	157	PR gas/12409
	158	* write.c (compress_debug): Return if section size is 0.
	159
4a58c4bd NC	160	2011-01-18 Mingfeng Wu <mingfeng@faraday-tech.com>
	161
	162	* config/tc-arm.c (arm_cpus): Add Faraday ARMv5TE compatible
	163	cores: fa606te, fa616te, fmp626. Modify the VFP of fa626te.
	164	* doc/c-arm.texi (ARM Options): Add -mcpu={fa606te, fa616te,
	165	fmp626} options.
	166
7c31ae13 NC	167	2011-01-18 Nick Clifton <nickc@redhat.com>
	168
	169	PR gas/12390
	170	* doc/all.texi: Add NS32K
	171	* doc/as.texinfo: Remove target specific details of which
	172	characters act as comment initiators and statement separators into
	173	individual target specific files.
	174	* doc/c-alpha.texi (Alpha-Chars): Document special behaviour of
	175	the hash character at the start of a line.
	176	* doc/c-arm.texi (ARM-Chars): Likewise.
	177	* doc/c-avr.texi (AVR-Chars): Likewise.
	178	* doc/c-d10v.texi (D10V-Chars): Likewise.
	179	* doc/c-d30v.texi (D30V-Chars): Likewise.
	180	* doc/c-mmix.texi (MMIX-Chars): Likewise.
	181	* doc/c-s390.texi (s390 characters): Likewise.
	182	* doc/c-sh.texi (SH-Chars): Likewise.
	183	* doc/c-sh64.texi (SH64-Chars): Likewise.
	184	* doc/c-sparc.texi (SPARC-Chars): Likewise.
	185	* doc/c-tic6x.texi (TIC6X Syntax): Likewise.
	186	* doc/c-xtensa.texi (Xtensa Syntax): Likewise.
	187	* doc/c-z80.texi (Z80-Chars): Likewise.
	188	* doc/c-z8k.texi (Z8000-Chars): Likewise.
	189	* doc/c-pdp11.texi (PDP11-Syntax): Document line separator character.
	190	* doc/c-arc.texi (ARC-Chars): Fill in this subsection.
	191	* doc/c-bfin.texi (Blackfin Syntax): Document line comment and
	192	line separator characters.
	193	* doc/c-cr16.texi (CR16 Syntax): Likewise.
	194	* doc/c-i386.texi (i386-Chars): Likewise.
	195	* doc/c-i860.texi (i860-Chars): Likewise.
	196	* doc/c-i960.texi (i960-Chars): Likewise.
	197	* doc/c-ip2k.texi (IP2K-Chars): Likewise.
	198	* doc/c-lm32.texi (LM32-Chars): likewise.
	199	* doc/c-m32c.texi (M32C-Chars): Likewise.
	200	* doc/c-m68hc11.texi (M68HC11-syntax): Likewise.
	201	* doc/c-m68k.texi (M68K-Chars): Likewise.
	202	* doc/c-microblaze.texi (MicroBlaze-Chars): Likewise.
	203	* doc/c-msp430.texi (MSP430-Chars): Likewise.
	204	* doc/c-mt.texi (MT-Chars): Likewise.
	205	* doc/c-ns32k.texi (NS32K-Chars): Likewise.
	206	* doc/c-pj.texi (PJ-Chars): Likewise.
	207	* doc/c-ppc.texi (PowerPC-Chars): Likewise.
	208	* doc/c-rx.texi (RX-Chars): Likewise.
	209	* doc/c-score.texi (SCORE-Chars): Likewise.
	210	* doc/c-tic54x.texi (TIC54X-Chars): Likewise.
	211	* doc/c-v850.texi (V850-Chars): Likewise.
	212	* doc/c-vax.texi (VAX-Chars): Likewise.
	213	* doc/c-xc16x.texi (xc16x-Chars): Likewise.
	214
2a2a0f38 QN	215	2011-01-17 Quentin Neill <quentin.neill@amd.com>
	216
	217	* config/tc-i386.c (cpu_arch): Add CPU_TBM_FLAGS.
	218
	219	* doc/c-i386.texi (i386-TBM): New section.
	220
862be3fb L	221	2011-01-16 H.J. Lu <hongjiu.lu@intel.com>
	222
	223	* config/tc-i386.c (disallow_64bit_disp): Renamed to ...
	224	(disallow_64bit_reloc): This.
	225	(md_assemble): Don't check movabs for x32 mode here.
	226	(i386_target_format): Updated.
	227	(tc_gen_reloc): Check if 64bit relocations are allowed.
	228
7f56bc95 L	229	2011-01-15 H.J. Lu <hongjiu.lu@intel.com>
	230
	231	* config/tc-i386.c (disallow_64bit_disp): New.
	232	(x86_elf_abi): Replace X86_64_LP64_ABI/X86_64_ILP32_ABI with
	233	X86_64_ABI/X86_64_X32_ABI.
	234	(md_assemble): Don't allow movabs with relocation in x32 mode.
	235	(i386_target_format): Updated.
	236
570561f7 L	237	2011-01-14 H.J. Lu <hongjiu.lu@intel.com>
	238
	239	* config/tc-i386.c (OPTION_N32): Renamed to ...
	240	(OPTION_X32): This.
	241	(md_longopts): Replace n32 with x32.
	242	(md_parse_option): Updated.
	243	(md_show_usage): Likewise.
	244
4a22cb7c	245	* doc/c-i386.texi: Replace --n32 with --x32.
570561f7	246
c95354ed MX	247	2011-01-11 Mingjie Xing <mingjie.xing@gmail.com>
	248
	249	* config/tc-mips.c (mips_ip): Update error messages. Take an
	250	unadjusted offset for "+c" argument.
	251
7af8ed2d NC	252	2011-01-10 Nick Clifton <nickc@redhat.com>
	253
	254	* config/tc-i386.c (x86_elf_abi): Only define for targets that use
	255	it.
	256
cdf9ccec NC	257	2011-01-10 Nick Clifton <nickc@redhat.com>
	258
	259	* config/tc-arm.c (s_arm_tls_desceq): Move code into ELF-only
	260	part of the file.
	261
0855e32b NS	262	2011-01-10 Nathan Sidwell <nathan@codesourcery.com>
	263	Glauber de Oliveira Costa <glommer@gmail.com>
	264
	265	* doc/c-arm.texi: Document TLSDESC and TLSCALL relocations, and
	266	.tlsdescseq directive.
	267	* config/tc-arm.c (arm_typed_reg_parse): Check for potential reloc
	268	following a symbol.
	269	(s_arm_tls_descseq): New directive.
	270	(md_pseudo_table): Add it.
	271	(encode_branch): Allow TLS_CALL relocs too.
	272	(do_t_blx, do_t_branch23): Use encode_branch.
	273	(reloc_names): Add tlsdesc and tlscall.
	274	(md_apply_fix): Process tls desc relocations.
	275	(tc_gen_reloc): Likewise.
	276	(arm_fix_adjustable): Likewise.
	277
87973e9f QN	278	2011-01-07 Quentin Neill <quentin.neill@amd.com>
	279
	280	* config/tc-i386.c (cpu_arch): Add CPU_BMI_FLAGS.
	281
	282	* doc/c-i386.texi (i386-BMI): New section.
	283
12505806 PK	284	2011-01-06 Paul Koning <ni1d@arrl.net>
	285
	286	* config/tc-pdp11.c (parse_op_no_deferred): Allow PC-relative
	287	references to absolute addresses.
	288
9689e3a3 DD	289	2011-01-05 DJ Delorie <dj@redhat.com>
	290
	291	* config/tc-rx.c (tc_gen_reloc): Emit an RX_OP_NEG expression
	292	instead of an RH_NEG32 one.
	293
35cc6a0b L	294	2011-01-05 Jonathan Wakely <jwakely.gcc@gmail.com>
	295
	296	* doc/c-i386.texi: Clarify --n32.
	297
f12dc422 L	298	2011-01-04 H.J. Lu <hongjiu.lu@intel.com>
	299
	300	* config/tc-i386.c (build_modrm_byte): Allow encoding 32/64bit
	301	integer registers in VEX.vvvv. Check register-only source
	302	operand when two source operands are swapped. Properly update
	303	destination when two source operands are swapped.
	304
0db46eb4 L	305	2011-01-01 H.J. Lu <hongjiu.lu@intel.com>
	306
	307	* gas.c (parse_args): Update copyright to 2011.
	308
5b326c3e	309	For older changes see ChangeLog-2010
08d56133 NC	310	\f
	311	Local Variables:
	312	mode: change-log
	313	left-margin: 8
	314	fill-column: 74
	315	version-control: never
	316	End: