[thirdparty/binutils-gdb.git] / gdb / gdbserver / configure.srv

# Mappings from configuration triplets to gdbserver build options.
# This is invoked from the autoconf-generated configure script, to
# produce the appropriate Makefile substitutions.

# This file sets the following shell variables:
#   srv_regobj		The register protocol appropriate for this target.
#   srv_tgtobj		Any other target-specific modules appropriate
#			for this target.
#
# In addition, on GNU/Linux the following shell variables will be set:
#   srv_linux_regsets	Set to "yes" if ptrace(PTRACE_GETREGS) and friends
#			may be available on this platform;  unset otherwise.
#			They will only be used if <sys/ptrace.h> defines
#			PTRACE_GETREGS.
#   srv_linux_usrregs	Set to "yes" if we can get at registers via
#			PTRACE_PEEKUSR / PTRACE_POKEUSR.

# Input is taken from the "${target}" variable.

case "${target}" in
  arm*-*-linux*)	srv_regobj=reg-arm.o
			srv_tgtobj="linux-low.o linux-arm-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  crisv32-*-linux*)	srv_regobj=reg-crisv32.o
			srv_tgtobj="linux-low.o linux-crisv32-low.o"
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  cris-*-linux*)	srv_regobj=reg-cris.o
			srv_tgtobj="linux-low.o linux-cris-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  i[34567]86-*-linux*)	srv_regobj=reg-i386-linux.o
			srv_tgtobj="linux-low.o linux-i386-low.o i387-fp.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  ia64-*-linux*)	srv_regobj=reg-ia64.o
			srv_tgtobj="linux-low.o linux-ia64-low.o"
			srv_linux_usrregs=yes
			;;
  m32r*-*-linux*)	srv_regobj=reg-m32r.o
			srv_tgtobj="linux-low.o linux-m32r-low.o"
			srv_linux_usrregs=yes
 			srv_linux_thread_db=yes
			;;
  m68*-*-linux*)	srv_regobj=reg-m68k.o
			srv_tgtobj="linux-low.o linux-m68k-low.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  m68*-*-uclinux*)	srv_regobj=reg-m68k.o
			srv_tgtobj="linux-low.o linux-m68k-low.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  mips*-*-linux*)	srv_regobj=reg-mips.o
			srv_tgtobj="linux-low.o linux-mips-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  powerpc64-*-linux*)	srv_regobj=reg-ppc64.o
			srv_tgtobj="linux-low.o linux-ppc64-low.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  powerpc-*-linux*)	srv_regobj=reg-ppc.o
			srv_tgtobj="linux-low.o linux-ppc-low.o"
			srv_linux_usrregs=yes
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  s390-*-linux*)	srv_regobj=reg-s390.o
			srv_tgtobj="linux-low.o linux-s390-low.o"
			srv_linux_usrregs=yes
			;;
  s390x-*-linux*)	srv_regobj=reg-s390x.o
			srv_tgtobj="linux-low.o linux-s390-low.o"
			srv_linux_usrregs=yes
			;;
  sh*-*-linux*)		srv_regobj=reg-sh.o
			srv_tgtobj="linux-low.o linux-sh-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  x86_64-*-linux*)	srv_regobj=reg-x86-64.o
			srv_tgtobj="linux-low.o linux-x86-64-low.o i387-fp.o"
			srv_linux_regsets=yes
			srv_linux_thread_db=yes
			;;
  xscale*-*-linux*)	srv_regobj=reg-arm.o
			srv_tgtobj="linux-low.o linux-arm-low.o"
			srv_linux_usrregs=yes
			srv_linux_thread_db=yes
			;;
  *)			echo "Error: target not supported by gdbserver."
			exit 1
			;;
esac
Commit	Line	Data
7ea81414 DJ	1	# Mappings from configuration triplets to gdbserver build options.
	2	# This is invoked from the autoconf-generated configure script, to
	3	# produce the appropriate Makefile substitutions.
	4
	5	# This file sets the following shell variables:
	6	# srv_regobj The register protocol appropriate for this target.
	7	# srv_tgtobj Any other target-specific modules appropriate
	8	# for this target.
	9	#
	10	# In addition, on GNU/Linux the following shell variables will be set:
	11	# srv_linux_regsets Set to "yes" if ptrace(PTRACE_GETREGS) and friends
	12	# may be available on this platform; unset otherwise.
58caa3dc DJ	13	# They will only be used if <sys/ptrace.h> defines
	14	# PTRACE_GETREGS.
	15	# srv_linux_usrregs Set to "yes" if we can get at registers via
	16	# PTRACE_PEEKUSR / PTRACE_POKEUSR.
7ea81414 DJ	17
	18	# Input is taken from the "${target}" variable.
	19
	20	case "${target}" in
	21	arm--linux*) srv_regobj=reg-arm.o
	22	srv_tgtobj="linux-low.o linux-arm-low.o"
58caa3dc	23	srv_linux_usrregs=yes
0d62e5e8	24	srv_linux_thread_db=yes
7ea81414	25	;;
45b134e5 OF	26	crisv32--linux) srv_regobj=reg-crisv32.o
	27	srv_tgtobj="linux-low.o linux-crisv32-low.o"
	28	srv_linux_regsets=yes
	29	srv_linux_thread_db=yes
	30	;;
	31	cris--linux) srv_regobj=reg-cris.o
	32	srv_tgtobj="linux-low.o linux-cris-low.o"
	33	srv_linux_usrregs=yes
	34	srv_linux_thread_db=yes
	35	;;
1581182a	36	i[34567]86--linux) srv_regobj=reg-i386-linux.o
58caa3dc DJ	37	srv_tgtobj="linux-low.o linux-i386-low.o i387-fp.o"
	38	srv_linux_usrregs=yes
	39	srv_linux_regsets=yes
0d62e5e8	40	srv_linux_thread_db=yes
7ea81414 DJ	41	;;
	42	ia64--linux) srv_regobj=reg-ia64.o
	43	srv_tgtobj="linux-low.o linux-ia64-low.o"
58caa3dc	44	srv_linux_usrregs=yes
7ea81414	45	;;
7cfbc4a0 KI	46	m32r--linux*) srv_regobj=reg-m32r.o
	47	srv_tgtobj="linux-low.o linux-m32r-low.o"
	48	srv_linux_usrregs=yes
	49	srv_linux_thread_db=yes
	50	;;
7ea81414 DJ	51	m68--linux*) srv_regobj=reg-m68k.o
7ea81414 DJ	52	srv_tgtobj="linux-low.o linux-m68k-low.o"
58caa3dc	53	srv_linux_usrregs=yes
db1d3e1b AS	54	srv_linux_regsets=yes
db1d3e1b AS	55	srv_linux_thread_db=yes
7ea81414	56	;;
52fb6437 NS	57	m68--uclinux*) srv_regobj=reg-m68k.o
	58	srv_tgtobj="linux-low.o linux-m68k-low.o"
	59	srv_linux_usrregs=yes
	60	srv_linux_regsets=yes
	61	srv_linux_thread_db=yes
	62	;;
7ea81414 DJ	63	mips--linux*) srv_regobj=reg-mips.o
7ea81414 DJ	64	srv_tgtobj="linux-low.o linux-mips-low.o"
58caa3dc	65	srv_linux_usrregs=yes
0d62e5e8	66	srv_linux_thread_db=yes
7ea81414	67	;;
eee84df1 DJ	68	powerpc64--linux) srv_regobj=reg-ppc64.o
	69	srv_tgtobj="linux-low.o linux-ppc64-low.o"
	70	srv_linux_usrregs=yes
e9d25b98	71	srv_linux_regsets=yes
eee84df1 DJ	72	srv_linux_thread_db=yes
	73	;;
	74	powerpc--linux) srv_regobj=reg-ppc.o
7ea81414	75	srv_tgtobj="linux-low.o linux-ppc-low.o"
58caa3dc	76	srv_linux_usrregs=yes
e9d25b98	77	srv_linux_regsets=yes
0d62e5e8	78	srv_linux_thread_db=yes
7ea81414	79	;;
265f716b DJ	80	s390--linux) srv_regobj=reg-s390.o
	81	srv_tgtobj="linux-low.o linux-s390-low.o"
	82	srv_linux_usrregs=yes
	83	;;
	84	s390x--linux) srv_regobj=reg-s390x.o
	85	srv_tgtobj="linux-low.o linux-s390-low.o"
	86	srv_linux_usrregs=yes
	87	;;
7ea81414 DJ	88	sh--linux*) srv_regobj=reg-sh.o
7ea81414 DJ	89	srv_tgtobj="linux-low.o linux-sh-low.o"
58caa3dc	90	srv_linux_usrregs=yes
0d62e5e8	91	srv_linux_thread_db=yes
58caa3dc DJ	92	;;
	93	x86_64--linux) srv_regobj=reg-x86-64.o
	94	srv_tgtobj="linux-low.o linux-x86-64-low.o i387-fp.o"
	95	srv_linux_regsets=yes
011a70c2	96	srv_linux_thread_db=yes
7ea81414	97	;;
7f313d07 BC	98	xscale--linux*) srv_regobj=reg-arm.o
	99	srv_tgtobj="linux-low.o linux-arm-low.o"
	100	srv_linux_usrregs=yes
	101	srv_linux_thread_db=yes
	102	;;
7ea81414 DJ	103	*) echo "Error: target not supported by gdbserver."
	104	exit 1
	105	;;
	106	esac