[thirdparty/binutils-gdb.git] / gdb / inferior.h

/* Variables that describe the inferior process running under GDB:
   Where it is, why it stopped, and how to step it.
   Copyright 1986, 1989, 1992, 1996, 1998 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 59 Temple Place - Suite 330,
   Boston, MA 02111-1307, USA.  */

#if !defined (INFERIOR_H)
#define INFERIOR_H 1

/* For bpstat.  */
#include "breakpoint.h"

/* For enum target_signal.  */
#include "target.h"

/* Structure in which to save the status of the inferior.  Create/Save
   through "save_inferior_status", restore through
   "restore_inferior_status".

   This pair of routines should be called around any transfer of
   control to the inferior which you don't want showing up in your
   control variables.  */

#ifdef __STDC__
struct inferior_status;
#endif

extern struct inferior_status *save_inferior_status PARAMS ((int));

extern void restore_inferior_status PARAMS ((struct inferior_status *));

extern void discard_inferior_status PARAMS ((struct inferior_status *));

extern void write_inferior_status_register PARAMS ((struct inferior_status * inf_status, int regno, LONGEST val));

/* This macro gives the number of registers actually in use by the
   inferior.  This may be less than the total number of registers,
   perhaps depending on the actual CPU in use or program being run.  */

#ifndef ARCH_NUM_REGS
#define ARCH_NUM_REGS NUM_REGS
#endif

extern void set_sigint_trap PARAMS ((void));

extern void clear_sigint_trap PARAMS ((void));

extern void set_sigio_trap PARAMS ((void));

extern void clear_sigio_trap PARAMS ((void));

/* File name for default use for standard in/out in the inferior.  */

extern char *inferior_io_terminal;

/* Pid of our debugged inferior, or 0 if no inferior now.  */

extern int inferior_pid;

/* Is the inferior running right now, as a result of a 'run&',
   'continue&' etc command? This is used in asycn gdb to determine
   whether a command that the user enters while the target is running
   is allowed or not. */
extern int target_executing;

/* Are we simulating synchronous execution? This is used in async gdb
   to implement the 'run', 'continue' etc commands, which will not
   redisplay the prompt until the execution is actually over. */
extern int sync_execution;

/* This is only valid when inferior_pid is non-zero.

   If this is 0, then exec events should be noticed and responded to
   by the debugger (i.e., be reported to the user).

   If this is > 0, then that many subsequent exec events should be
   ignored (i.e., not be reported to the user).
 */
extern int inferior_ignoring_startup_exec_events;

/* This is only valid when inferior_ignoring_startup_exec_events is
   zero.

   Some targets (stupidly) report more than one exec event per actual
   call to an event() system call.  If only the last such exec event
   need actually be noticed and responded to by the debugger (i.e.,
   be reported to the user), then this is the number of "leading"
   exec events which should be ignored.
 */
extern int inferior_ignoring_leading_exec_events;

/* Inferior environment. */

extern struct environ *inferior_environ;

/* Character array containing an image of the inferior programs'
   registers. */

extern char *registers;

/* Character array containing the current state of each register
   (unavailable<0, valid=0, invalid>0). */

extern signed char *register_valid;

extern void clear_proceed_status PARAMS ((void));

extern void proceed PARAMS ((CORE_ADDR, enum target_signal, int));

extern void kill_inferior PARAMS ((void));

extern void generic_mourn_inferior PARAMS ((void));

extern void terminal_ours PARAMS ((void));

extern int run_stack_dummy PARAMS ((CORE_ADDR, char *));

extern CORE_ADDR read_pc PARAMS ((void));

extern CORE_ADDR read_pc_pid PARAMS ((int));

extern CORE_ADDR generic_target_read_pc PARAMS ((int));

extern void write_pc PARAMS ((CORE_ADDR));

extern void write_pc_pid PARAMS ((CORE_ADDR, int));

extern void generic_target_write_pc PARAMS ((CORE_ADDR, int));

extern CORE_ADDR read_sp PARAMS ((void));

extern CORE_ADDR generic_target_read_sp PARAMS ((void));

extern void write_sp PARAMS ((CORE_ADDR));

extern void generic_target_write_sp PARAMS ((CORE_ADDR));

extern CORE_ADDR read_fp PARAMS ((void));

extern CORE_ADDR generic_target_read_fp PARAMS ((void));

extern void write_fp PARAMS ((CORE_ADDR));

extern void generic_target_write_fp PARAMS ((CORE_ADDR));

extern void wait_for_inferior PARAMS ((void));

extern void fetch_inferior_event PARAMS ((void));

extern void init_wait_for_inferior PARAMS ((void));

extern void close_exec_file PARAMS ((void));

extern void reopen_exec_file PARAMS ((void));

/* The `resume' routine should only be called in special circumstances.
   Normally, use `proceed', which handles a lot of bookkeeping.  */

extern void resume PARAMS ((int, enum target_signal));

/* From misc files */

extern void store_inferior_registers PARAMS ((int));

extern void fetch_inferior_registers PARAMS ((int));

extern void solib_create_inferior_hook PARAMS ((void));

extern void child_terminal_info PARAMS ((char *, int));

extern void term_info PARAMS ((char *, int));

extern void terminal_ours_for_output PARAMS ((void));

extern void terminal_inferior PARAMS ((void));

extern void terminal_init_inferior PARAMS ((void));

extern void terminal_init_inferior_with_pgrp PARAMS ((int pgrp));

/* From infptrace.c or infttrace.c */

extern int attach PARAMS ((int));

#if !defined(REQUIRE_ATTACH)
#define REQUIRE_ATTACH attach
#endif

#if !defined(REQUIRE_DETACH)
#define REQUIRE_DETACH(pid,siggnal) detach (siggnal)
#endif

extern void detach PARAMS ((int));

/* PTRACE method of waiting for inferior process.  */
int ptrace_wait PARAMS ((int, int *));

extern void child_resume PARAMS ((int, int, enum target_signal));

#ifndef PTRACE_ARG3_TYPE
#define PTRACE_ARG3_TYPE int	/* Correct definition for most systems. */
#endif

extern int call_ptrace PARAMS ((int, int, PTRACE_ARG3_TYPE, int));

extern void pre_fork_inferior PARAMS ((void));

/* From procfs.c */

extern int proc_iterate_over_mappings PARAMS ((int (*)(int, CORE_ADDR)));

extern int procfs_first_available PARAMS ((void));

extern int procfs_get_pid_fd PARAMS ((int));

/* From fork-child.c */

extern void fork_inferior PARAMS ((char *, char *, char **,
				   void (*)(void),
				   void (*)(int),
				   void (*)(void),
				   char *));


extern void
clone_and_follow_inferior PARAMS ((int, int *));

extern void startup_inferior PARAMS ((int));

/* From inflow.c */

extern void new_tty_prefork PARAMS ((char *));

extern int gdb_has_a_terminal PARAMS ((void));

/* From infrun.c */

extern void start_remote PARAMS ((void));

extern void normal_stop PARAMS ((void));

extern int signal_stop_state PARAMS ((int));

extern int signal_print_state PARAMS ((int));

extern int signal_pass_state PARAMS ((int));

/* From infcmd.c */

extern void tty_command PARAMS ((char *, int));

extern void attach_command PARAMS ((char *, int));

/* Last signal that the inferior received (why it stopped).  */

extern enum target_signal stop_signal;

/* Address at which inferior stopped.  */

extern CORE_ADDR stop_pc;

/* Chain containing status of breakpoint(s) that we have stopped at.  */

extern bpstat stop_bpstat;

/* Flag indicating that a command has proceeded the inferior past the
   current breakpoint.  */

extern int breakpoint_proceeded;

/* Nonzero if stopped due to a step command.  */

extern int stop_step;

/* Nonzero if stopped due to completion of a stack dummy routine.  */

extern int stop_stack_dummy;

/* Nonzero if program stopped due to a random (unexpected) signal in
   inferior process.  */

extern int stopped_by_random_signal;

/* Range to single step within.
   If this is nonzero, respond to a single-step signal
   by continuing to step if the pc is in this range.

   If step_range_start and step_range_end are both 1, it means to step for
   a single instruction (FIXME: it might clean up wait_for_inferior in a
   minor way if this were changed to the address of the instruction and
   that address plus one.  But maybe not.).  */

extern CORE_ADDR step_range_start;	/* Inclusive */
extern CORE_ADDR step_range_end;	/* Exclusive */

/* Stack frame address as of when stepping command was issued.
   This is how we know when we step into a subroutine call,
   and how to set the frame for the breakpoint used to step out.  */

extern CORE_ADDR step_frame_address;

/* Our notion of the current stack pointer.  */

extern CORE_ADDR step_sp;

/* 1 means step over all subroutine calls.
   -1 means step over calls to undebuggable functions.  */

extern int step_over_calls;

/* If stepping, nonzero means step count is > 1
   so don't print frame next time inferior stops
   if it stops due to stepping.  */

extern int step_multi;

/* Nonzero means expecting a trap and caller will handle it themselves.
   It is used after attach, due to attaching to a process;
   when running in the shell before the child program has been exec'd;
   and when running some kinds of remote stuff (FIXME?).  */

extern int stop_soon_quietly;

/* Nonzero if proceed is being used for a "finish" command or a similar
   situation when stop_registers should be saved.  */

extern int proceed_to_finish;

/* Save register contents here when about to pop a stack dummy frame,
   if-and-only-if proceed_to_finish is set.
   Thus this contains the return value from the called function (assuming
   values are returned in a register).  */

extern char *stop_registers;

/* Nonzero if the child process in inferior_pid was attached rather
   than forked.  */

extern int attach_flag;
\f
/* Sigtramp is a routine that the kernel calls (which then calls the
   signal handler).  On most machines it is a library routine that
   is linked into the executable.

   This macro, given a program counter value and the name of the
   function in which that PC resides (which can be null if the
   name is not known), returns nonzero if the PC and name show
   that we are in sigtramp.

   On most machines just see if the name is sigtramp (and if we have
   no name, assume we are not in sigtramp).  */
#if !defined (IN_SIGTRAMP)
#if defined (SIGTRAMP_START)
#define IN_SIGTRAMP(pc, name) \
       ((pc) >= SIGTRAMP_START(pc)   \
        && (pc) < SIGTRAMP_END(pc) \
        )
#else
#define IN_SIGTRAMP(pc, name) \
       (name && STREQ ("_sigtramp", name))
#endif
#endif
\f
/* Possible values for CALL_DUMMY_LOCATION.  */
#define ON_STACK 1
#define BEFORE_TEXT_END 2
#define AFTER_TEXT_END 3
#define AT_ENTRY_POINT 4

#if !defined (USE_GENERIC_DUMMY_FRAMES)
#define USE_GENERIC_DUMMY_FRAMES 0
#endif

#if !defined (CALL_DUMMY_LOCATION)
#define CALL_DUMMY_LOCATION ON_STACK
#endif /* No CALL_DUMMY_LOCATION.  */

#if !defined (CALL_DUMMY_ADDRESS)
#define CALL_DUMMY_ADDRESS() (abort (), 0)	/* anything to abort GDB */
#endif
#if !defined (CALL_DUMMY_START_OFFSET)
#define CALL_DUMMY_START_OFFSET (abort (), 0)	/* anything to abort GDB */
#endif
#if !defined (CALL_DUMMY_BREAKPOINT_OFFSET)
#define CALL_DUMMY_BREAKPOINT_OFFSET_P (0)
#define CALL_DUMMY_BREAKPOINT_OFFSET (abort (), 0)	/* anything to abort GDB */
#endif
#if !defined CALL_DUMMY_BREAKPOINT_OFFSET_P
#define CALL_DUMMY_BREAKPOINT_OFFSET_P (1)
#endif
#if !defined (CALL_DUMMY_LENGTH)
#define CALL_DUMMY_LENGTH (abort (), 0)		/* anything to abort GDB */
#endif

#if defined (CALL_DUMMY_STACK_ADJUST)
#if !defined (CALL_DUMMY_STACK_ADJUST_P)
#define CALL_DUMMY_STACK_ADJUST_P (1)
#endif
#endif
#if !defined (CALL_DUMMY_STACK_ADJUST)
#define CALL_DUMMY_STACK_ADJUST (abort (), 0)
#endif
#if !defined (CALL_DUMMY_STACK_ADJUST_P)
#define CALL_DUMMY_STACK_ADJUST_P (0)
#endif

#if !defined (CALL_DUMMY_P)
#if defined (CALL_DUMMY)
#define CALL_DUMMY_P 1
#else
#define CALL_DUMMY_P 0
#endif
#endif

#if !defined (CALL_DUMMY_WORDS)
#if defined (CALL_DUMMY)
extern LONGEST call_dummy_words[];
#define CALL_DUMMY_WORDS (call_dummy_words)
#else
#define CALL_DUMMY_WORDS (abort (), (void*) 0)	/* anything to abort GDB */
#endif
#endif

#if !defined (SIZEOF_CALL_DUMMY_WORDS)
#if defined (CALL_DUMMY)
extern int sizeof_call_dummy_words;
#define SIZEOF_CALL_DUMMY_WORDS (sizeof_call_dummy_words)
#else
#define SIZEOF_CALL_DUMMY_WORDS (abort (), 0)	/* anything to abort GDB */
#endif
#endif

#if !defined PUSH_DUMMY_FRAME
#define PUSH_DUMMY_FRAME (abort ())
#endif

#if !defined FIX_CALL_DUMMY
#define FIX_CALL_DUMMY(a1,a2,a3,a4,a5,a6,a7) (abort ())
#endif

#if !defined STORE_STRUCT_RETURN
#define STORE_STRUCT_RETURN(a1,a2) (abort ())
#endif


/* Are we in a call dummy? */

extern int pc_in_call_dummy_before_text_end PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
#if !GDB_MULTI_ARCH
#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == BEFORE_TEXT_END
#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_before_text_end (pc, sp, frame_address)
#endif /* Before text_end.  */
#endif

extern int pc_in_call_dummy_after_text_end PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
#if !GDB_MULTI_ARCH
#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == AFTER_TEXT_END
#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_after_text_end (pc, sp, frame_address)
#endif
#endif

extern int pc_in_call_dummy_on_stack PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
#if !GDB_MULTI_ARCH
#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == ON_STACK
#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_on_stack (pc, sp, frame_address)
#endif
#endif

extern int pc_in_call_dummy_at_entry_point PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
#if !GDB_MULTI_ARCH
#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == AT_ENTRY_POINT
#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_at_entry_point (pc, sp, frame_address)
#endif
#endif

/* It's often not enough for our clients to know whether the PC is merely
   somewhere within the call dummy.  They may need to know whether the
   call dummy has actually completed.  (For example, wait_for_inferior
   wants to know when it should truly stop because the call dummy has
   completed.  If we're single-stepping because of slow watchpoints,
   then we may find ourselves stopped at the entry of the call dummy,
   and want to continue stepping until we reach the end.)

   Note that this macro is intended for targets (like HP-UX) which
   require more than a single breakpoint in their call dummies, and
   therefore cannot use the CALL_DUMMY_BREAKPOINT_OFFSET mechanism.

   If a target does define CALL_DUMMY_BREAKPOINT_OFFSET, then this
   default implementation of CALL_DUMMY_HAS_COMPLETED is sufficient.
   Else, a target may wish to supply an implementation that works in
   the presense of multiple breakpoints in its call dummy.
 */
#if !defined(CALL_DUMMY_HAS_COMPLETED)
#define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
  PC_IN_CALL_DUMMY((pc), (sp), (frame_address))
#endif

/* If STARTUP_WITH_SHELL is set, GDB's "run"
   will attempts to start up the debugee under a shell.
   This is in order for argument-expansion to occur. E.g.,
   (gdb) run *
   The "*" gets expanded by the shell into a list of files.
   While this is a nice feature, it turns out to interact badly
   with some of the catch-fork/catch-exec features we have added.
   In particular, if the shell does any fork/exec's before
   the exec of the target program, that can confuse GDB.
   To disable this feature, set STARTUP_WITH_SHELL to 0.
   To enable this feature, set STARTUP_WITH_SHELL to 1.
   The catch-exec traps expected during start-up will
   be 1 if target is not started up with a shell, 2 if it is.
   - RT
   If you disable this, you need to decrement
   START_INFERIOR_TRAPS_EXPECTED in tm.h. */
#define STARTUP_WITH_SHELL 1
#if !defined(START_INFERIOR_TRAPS_EXPECTED)
#define START_INFERIOR_TRAPS_EXPECTED	2
#endif
#endif /* !defined (INFERIOR_H) */
Commit	Line	Data
c906108c SS	1	/* Variables that describe the inferior process running under GDB:
	2	Where it is, why it stopped, and how to step it.
	3	Copyright 1986, 1989, 1992, 1996, 1998 Free Software Foundation, Inc.
	4
c5aa993b	5	This file is part of GDB.
c906108c	6
c5aa993b JM	7	This program is free software; you can redistribute it and/or modify
	8	it under the terms of the GNU General Public License as published by
	9	the Free Software Foundation; either version 2 of the License, or
	10	(at your option) any later version.
c906108c	11
c5aa993b JM	12	This program is distributed in the hope that it will be useful,
	13	but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	GNU General Public License for more details.
c906108c	16
c5aa993b JM	17	You should have received a copy of the GNU General Public License
	18	along with this program; if not, write to the Free Software
	19	Foundation, Inc., 59 Temple Place - Suite 330,
	20	Boston, MA 02111-1307, USA. */
c906108c SS	21
	22	#if !defined (INFERIOR_H)
	23	#define INFERIOR_H 1
	24
	25	/* For bpstat. */
	26	#include "breakpoint.h"
	27
	28	/* For enum target_signal. */
	29	#include "target.h"
	30
7a292a7a	31	/* Structure in which to save the status of the inferior. Create/Save
c906108c SS	32	through "save_inferior_status", restore through
c906108c SS	33	"restore_inferior_status".
7a292a7a	34
c906108c SS	35	This pair of routines should be called around any transfer of
	36	control to the inferior which you don't want showing up in your
	37	control variables. */
	38
7a292a7a SS	39	#ifdef __STDC__
	40	struct inferior_status;
	41	#endif
	42
	43	extern struct inferior_status *save_inferior_status PARAMS ((int));
	44
	45	extern void restore_inferior_status PARAMS ((struct inferior_status *));
	46
	47	extern void discard_inferior_status PARAMS ((struct inferior_status *));
	48
c5aa993b	49	extern void write_inferior_status_register PARAMS ((struct inferior_status * inf_status, int regno, LONGEST val));
c906108c SS	50
	51	/* This macro gives the number of registers actually in use by the
	52	inferior. This may be less than the total number of registers,
	53	perhaps depending on the actual CPU in use or program being run. */
	54
	55	#ifndef ARCH_NUM_REGS
	56	#define ARCH_NUM_REGS NUM_REGS
	57	#endif
	58
c906108c SS	59	extern void set_sigint_trap PARAMS ((void));
	60
	61	extern void clear_sigint_trap PARAMS ((void));
	62
	63	extern void set_sigio_trap PARAMS ((void));
	64
	65	extern void clear_sigio_trap PARAMS ((void));
	66
	67	/* File name for default use for standard in/out in the inferior. */
	68
	69	extern char *inferior_io_terminal;
	70
	71	/* Pid of our debugged inferior, or 0 if no inferior now. */
	72
	73	extern int inferior_pid;
	74
43ff13b4 JM	75	/* Is the inferior running right now, as a result of a 'run&',
	76	'continue&' etc command? This is used in asycn gdb to determine
	77	whether a command that the user enters while the target is running
	78	is allowed or not. */
	79	extern int target_executing;
	80
	81	/* Are we simulating synchronous execution? This is used in async gdb
	82	to implement the 'run', 'continue' etc commands, which will not
	83	redisplay the prompt until the execution is actually over. */
	84	extern int sync_execution;
	85
c906108c SS	86	/* This is only valid when inferior_pid is non-zero.
	87
	88	If this is 0, then exec events should be noticed and responded to
	89	by the debugger (i.e., be reported to the user).
	90
	91	If this is > 0, then that many subsequent exec events should be
	92	ignored (i.e., not be reported to the user).
c5aa993b	93	*/
c906108c SS	94	extern int inferior_ignoring_startup_exec_events;
	95
	96	/* This is only valid when inferior_ignoring_startup_exec_events is
	97	zero.
	98
	99	Some targets (stupidly) report more than one exec event per actual
	100	call to an event() system call. If only the last such exec event
	101	need actually be noticed and responded to by the debugger (i.e.,
	102	be reported to the user), then this is the number of "leading"
	103	exec events which should be ignored.
c5aa993b	104	*/
c906108c SS	105	extern int inferior_ignoring_leading_exec_events;
	106
	107	/* Inferior environment. */
	108
	109	extern struct environ *inferior_environ;
	110
7a292a7a SS	111	/* Character array containing an image of the inferior programs'
7a292a7a SS	112	registers. */
c906108c	113
7a292a7a	114	extern char *registers;
c906108c	115
7a292a7a SS	116	/* Character array containing the current state of each register
7a292a7a SS	117	(unavailable<0, valid=0, invalid>0). */
c906108c	118
7a292a7a	119	extern signed char *register_valid;
c906108c SS	120
	121	extern void clear_proceed_status PARAMS ((void));
	122
	123	extern void proceed PARAMS ((CORE_ADDR, enum target_signal, int));
	124
	125	extern void kill_inferior PARAMS ((void));
	126
	127	extern void generic_mourn_inferior PARAMS ((void));
	128
	129	extern void terminal_ours PARAMS ((void));
	130
c5aa993b	131	extern int run_stack_dummy PARAMS ((CORE_ADDR, char *));
c906108c SS	132
	133	extern CORE_ADDR read_pc PARAMS ((void));
	134
	135	extern CORE_ADDR read_pc_pid PARAMS ((int));
	136
0f71a2f6 JM	137	extern CORE_ADDR generic_target_read_pc PARAMS ((int));
0f71a2f6 JM	138
c906108c SS	139	extern void write_pc PARAMS ((CORE_ADDR));
	140
	141	extern void write_pc_pid PARAMS ((CORE_ADDR, int));
	142
0f71a2f6 JM	143	extern void generic_target_write_pc PARAMS ((CORE_ADDR, int));
0f71a2f6 JM	144
c906108c SS	145	extern CORE_ADDR read_sp PARAMS ((void));
c906108c SS	146
0f71a2f6 JM	147	extern CORE_ADDR generic_target_read_sp PARAMS ((void));
0f71a2f6 JM	148
c906108c SS	149	extern void write_sp PARAMS ((CORE_ADDR));
c906108c SS	150
0f71a2f6 JM	151	extern void generic_target_write_sp PARAMS ((CORE_ADDR));
0f71a2f6 JM	152
c906108c SS	153	extern CORE_ADDR read_fp PARAMS ((void));
c906108c SS	154
0f71a2f6 JM	155	extern CORE_ADDR generic_target_read_fp PARAMS ((void));
0f71a2f6 JM	156
c906108c SS	157	extern void write_fp PARAMS ((CORE_ADDR));
c906108c SS	158
0f71a2f6 JM	159	extern void generic_target_write_fp PARAMS ((CORE_ADDR));
0f71a2f6 JM	160
c906108c SS	161	extern void wait_for_inferior PARAMS ((void));
c906108c SS	162
43ff13b4 JM	163	extern void fetch_inferior_event PARAMS ((void));
43ff13b4 JM	164
c906108c SS	165	extern void init_wait_for_inferior PARAMS ((void));
	166
	167	extern void close_exec_file PARAMS ((void));
	168
	169	extern void reopen_exec_file PARAMS ((void));
	170
	171	/* The `resume' routine should only be called in special circumstances.
	172	Normally, use `proceed', which handles a lot of bookkeeping. */
	173
	174	extern void resume PARAMS ((int, enum target_signal));
	175
	176	/* From misc files */
	177
	178	extern void store_inferior_registers PARAMS ((int));
	179
	180	extern void fetch_inferior_registers PARAMS ((int));
	181
	182	extern void solib_create_inferior_hook PARAMS ((void));
	183
	184	extern void child_terminal_info PARAMS ((char *, int));
	185
	186	extern void term_info PARAMS ((char *, int));
	187
	188	extern void terminal_ours_for_output PARAMS ((void));
	189
	190	extern void terminal_inferior PARAMS ((void));
	191
	192	extern void terminal_init_inferior PARAMS ((void));
	193
	194	extern void terminal_init_inferior_with_pgrp PARAMS ((int pgrp));
	195
	196	/* From infptrace.c or infttrace.c */
	197
	198	extern int attach PARAMS ((int));
	199
	200	#if !defined(REQUIRE_ATTACH)
	201	#define REQUIRE_ATTACH attach
	202	#endif
	203
	204	#if !defined(REQUIRE_DETACH)
	205	#define REQUIRE_DETACH(pid,siggnal) detach (siggnal)
	206	#endif
	207
	208	extern void detach PARAMS ((int));
	209
7a292a7a	210	/* PTRACE method of waiting for inferior process. */
c906108c SS	211	int ptrace_wait PARAMS ((int, int *));
	212
	213	extern void child_resume PARAMS ((int, int, enum target_signal));
	214
	215	#ifndef PTRACE_ARG3_TYPE
	216	#define PTRACE_ARG3_TYPE int /* Correct definition for most systems. */
	217	#endif
	218
	219	extern int call_ptrace PARAMS ((int, int, PTRACE_ARG3_TYPE, int));
	220
	221	extern void pre_fork_inferior PARAMS ((void));
	222
	223	/* From procfs.c */
	224
	225	extern int proc_iterate_over_mappings PARAMS ((int (*)(int, CORE_ADDR)));
	226
	227	extern int procfs_first_available PARAMS ((void));
	228
	229	extern int procfs_get_pid_fd PARAMS ((int));
	230
	231	/* From fork-child.c */
	232
	233	extern void fork_inferior PARAMS ((char , char , char **,
	234	void (*)(void),
	235	void (*)(int),
	236	void (*)(void),
	237	char *));
	238
	239
	240	extern void
	241	clone_and_follow_inferior PARAMS ((int, int *));
	242
	243	extern void startup_inferior PARAMS ((int));
	244
	245	/* From inflow.c */
	246
	247	extern void new_tty_prefork PARAMS ((char *));
	248
	249	extern int gdb_has_a_terminal PARAMS ((void));
	250
	251	/* From infrun.c */
	252
	253	extern void start_remote PARAMS ((void));
	254
	255	extern void normal_stop PARAMS ((void));
	256
	257	extern int signal_stop_state PARAMS ((int));
	258
	259	extern int signal_print_state PARAMS ((int));
	260
	261	extern int signal_pass_state PARAMS ((int));
	262
	263	/* From infcmd.c */
	264
	265	extern void tty_command PARAMS ((char *, int));
	266
	267	extern void attach_command PARAMS ((char *, int));
	268
	269	/* Last signal that the inferior received (why it stopped). */
	270
	271	extern enum target_signal stop_signal;
	272
	273	/* Address at which inferior stopped. */
	274
275	extern CORE_ADDR stop_pc;
276
277	/* Chain containing status of breakpoint(s) that we have stopped at. */
278
279	extern bpstat stop_bpstat;
280
281	/* Flag indicating that a command has proceeded the inferior past the
282	current breakpoint. */
283
284	extern int breakpoint_proceeded;
285
286	/* Nonzero if stopped due to a step command. */
287
288	extern int stop_step;
289
290	/* Nonzero if stopped due to completion of a stack dummy routine. */
291
292	extern int stop_stack_dummy;
293
294	/* Nonzero if program stopped due to a random (unexpected) signal in
295	inferior process. */
296
297	extern int stopped_by_random_signal;
298
299	/* Range to single step within.
300	If this is nonzero, respond to a single-step signal
301	by continuing to step if the pc is in this range.
302
303	If step_range_start and step_range_end are both 1, it means to step for
304	a single instruction (FIXME: it might clean up wait_for_inferior in a
305	minor way if this were changed to the address of the instruction and
306	that address plus one. But maybe not.). */
307
308	extern CORE_ADDR step_range_start; /* Inclusive */
c5aa993b	309	extern CORE_ADDR step_range_end; /* Exclusive */
c906108c SS	310
	311	/* Stack frame address as of when stepping command was issued.
	312	This is how we know when we step into a subroutine call,
	313	and how to set the frame for the breakpoint used to step out. */
	314
	315	extern CORE_ADDR step_frame_address;
	316
	317	/* Our notion of the current stack pointer. */
	318
	319	extern CORE_ADDR step_sp;
	320
	321	/* 1 means step over all subroutine calls.
	322	-1 means step over calls to undebuggable functions. */
	323
	324	extern int step_over_calls;
	325
	326	/* If stepping, nonzero means step count is > 1
	327	so don't print frame next time inferior stops
	328	if it stops due to stepping. */
	329
	330	extern int step_multi;
	331
	332	/* Nonzero means expecting a trap and caller will handle it themselves.
	333	It is used after attach, due to attaching to a process;
	334	when running in the shell before the child program has been exec'd;
	335	and when running some kinds of remote stuff (FIXME?). */
	336
	337	extern int stop_soon_quietly;
	338
	339	/* Nonzero if proceed is being used for a "finish" command or a similar
	340	situation when stop_registers should be saved. */
	341
	342	extern int proceed_to_finish;
	343
	344	/* Save register contents here when about to pop a stack dummy frame,
	345	if-and-only-if proceed_to_finish is set.
	346	Thus this contains the return value from the called function (assuming
	347	values are returned in a register). */
	348
7a292a7a	349	extern char *stop_registers;
c906108c SS	350
	351	/* Nonzero if the child process in inferior_pid was attached rather
	352	than forked. */
	353
	354	extern int attach_flag;
	355	\f
	356	/* Sigtramp is a routine that the kernel calls (which then calls the
	357	signal handler). On most machines it is a library routine that
	358	is linked into the executable.
	359
	360	This macro, given a program counter value and the name of the
	361	function in which that PC resides (which can be null if the
	362	name is not known), returns nonzero if the PC and name show
	363	that we are in sigtramp.
	364
	365	On most machines just see if the name is sigtramp (and if we have
	366	no name, assume we are not in sigtramp). */
	367	#if !defined (IN_SIGTRAMP)
	368	#if defined (SIGTRAMP_START)
	369	#define IN_SIGTRAMP(pc, name) \
	370	((pc) >= SIGTRAMP_START(pc) \
	371	&& (pc) < SIGTRAMP_END(pc) \
	372	)
	373	#else
	374	#define IN_SIGTRAMP(pc, name) \
	375	(name && STREQ ("_sigtramp", name))
	376	#endif
	377	#endif
	378	\f
	379	/* Possible values for CALL_DUMMY_LOCATION. */
	380	#define ON_STACK 1
	381	#define BEFORE_TEXT_END 2
	382	#define AFTER_TEXT_END 3
	383	#define AT_ENTRY_POINT 4
	384
7a292a7a SS	385	#if !defined (USE_GENERIC_DUMMY_FRAMES)
	386	#define USE_GENERIC_DUMMY_FRAMES 0
	387	#endif
	388
c906108c SS	389	#if !defined (CALL_DUMMY_LOCATION)
	390	#define CALL_DUMMY_LOCATION ON_STACK
	391	#endif /* No CALL_DUMMY_LOCATION. */
	392
7a292a7a	393	#if !defined (CALL_DUMMY_ADDRESS)
c5aa993b	394	#define CALL_DUMMY_ADDRESS() (abort (), 0) /* anything to abort GDB */
7a292a7a SS	395	#endif
7a292a7a SS	396	#if !defined (CALL_DUMMY_START_OFFSET)
c5aa993b	397	#define CALL_DUMMY_START_OFFSET (abort (), 0) /* anything to abort GDB */
7a292a7a SS	398	#endif
	399	#if !defined (CALL_DUMMY_BREAKPOINT_OFFSET)
	400	#define CALL_DUMMY_BREAKPOINT_OFFSET_P (0)
c5aa993b	401	#define CALL_DUMMY_BREAKPOINT_OFFSET (abort (), 0) /* anything to abort GDB */
7a292a7a SS	402	#endif
	403	#if !defined CALL_DUMMY_BREAKPOINT_OFFSET_P
	404	#define CALL_DUMMY_BREAKPOINT_OFFSET_P (1)
	405	#endif
	406	#if !defined (CALL_DUMMY_LENGTH)
c5aa993b	407	#define CALL_DUMMY_LENGTH (abort (), 0) /* anything to abort GDB */
7a292a7a SS	408	#endif
	409
	410	#if defined (CALL_DUMMY_STACK_ADJUST)
	411	#if !defined (CALL_DUMMY_STACK_ADJUST_P)
	412	#define CALL_DUMMY_STACK_ADJUST_P (1)
	413	#endif
	414	#endif
	415	#if !defined (CALL_DUMMY_STACK_ADJUST)
	416	#define CALL_DUMMY_STACK_ADJUST (abort (), 0)
	417	#endif
	418	#if !defined (CALL_DUMMY_STACK_ADJUST_P)
	419	#define CALL_DUMMY_STACK_ADJUST_P (0)
	420	#endif
	421
	422	#if !defined (CALL_DUMMY_P)
	423	#if defined (CALL_DUMMY)
	424	#define CALL_DUMMY_P 1
	425	#else
	426	#define CALL_DUMMY_P 0
	427	#endif
	428	#endif
	429
	430	#if !defined (CALL_DUMMY_WORDS)
	431	#if defined (CALL_DUMMY)
	432	extern LONGEST call_dummy_words[];
	433	#define CALL_DUMMY_WORDS (call_dummy_words)
	434	#else
c5aa993b	435	#define CALL_DUMMY_WORDS (abort (), (void) 0) / anything to abort GDB */
7a292a7a SS	436	#endif
	437	#endif
	438
	439	#if !defined (SIZEOF_CALL_DUMMY_WORDS)
	440	#if defined (CALL_DUMMY)
	441	extern int sizeof_call_dummy_words;
	442	#define SIZEOF_CALL_DUMMY_WORDS (sizeof_call_dummy_words)
	443	#else
c5aa993b	444	#define SIZEOF_CALL_DUMMY_WORDS (abort (), 0) /* anything to abort GDB */
7a292a7a SS	445	#endif
	446	#endif
	447
	448	#if !defined PUSH_DUMMY_FRAME
	449	#define PUSH_DUMMY_FRAME (abort ())
	450	#endif
	451
	452	#if !defined FIX_CALL_DUMMY
	453	#define FIX_CALL_DUMMY(a1,a2,a3,a4,a5,a6,a7) (abort ())
	454	#endif
	455
	456	#if !defined STORE_STRUCT_RETURN
	457	#define STORE_STRUCT_RETURN(a1,a2) (abort ())
	458	#endif
	459
	460
	461	/* Are we in a call dummy? */
	462
	463	extern int pc_in_call_dummy_before_text_end PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
0f71a2f6	464	#if !GDB_MULTI_ARCH
7a292a7a SS	465	#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == BEFORE_TEXT_END
7a292a7a SS	466	#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_before_text_end (pc, sp, frame_address)
c906108c	467	#endif /* Before text_end. */
0f71a2f6	468	#endif
c906108c	469
7a292a7a	470	extern int pc_in_call_dummy_after_text_end PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
0f71a2f6	471	#if !GDB_MULTI_ARCH
7a292a7a	472	#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == AFTER_TEXT_END
c5aa993b	473	#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_after_text_end (pc, sp, frame_address)
7a292a7a	474	#endif
0f71a2f6	475	#endif
7a292a7a SS	476
7a292a7a SS	477	extern int pc_in_call_dummy_on_stack PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
0f71a2f6	478	#if !GDB_MULTI_ARCH
7a292a7a SS	479	#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == ON_STACK
	480	#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_on_stack (pc, sp, frame_address)
	481	#endif
0f71a2f6	482	#endif
7a292a7a SS	483
7a292a7a SS	484	extern int pc_in_call_dummy_at_entry_point PARAMS ((CORE_ADDR pc, CORE_ADDR sp, CORE_ADDR frame_address));
0f71a2f6	485	#if !GDB_MULTI_ARCH
7a292a7a SS	486	#if !defined (PC_IN_CALL_DUMMY) && CALL_DUMMY_LOCATION == AT_ENTRY_POINT
	487	#define PC_IN_CALL_DUMMY(pc, sp, frame_address) pc_in_call_dummy_at_entry_point (pc, sp, frame_address)
	488	#endif
0f71a2f6	489	#endif
c906108c SS	490
	491	/* It's often not enough for our clients to know whether the PC is merely
	492	somewhere within the call dummy. They may need to know whether the
	493	call dummy has actually completed. (For example, wait_for_inferior
	494	wants to know when it should truly stop because the call dummy has
	495	completed. If we're single-stepping because of slow watchpoints,
	496	then we may find ourselves stopped at the entry of the call dummy,
	497	and want to continue stepping until we reach the end.)
	498
	499	Note that this macro is intended for targets (like HP-UX) which
	500	require more than a single breakpoint in their call dummies, and
	501	therefore cannot use the CALL_DUMMY_BREAKPOINT_OFFSET mechanism.
	502
	503	If a target does define CALL_DUMMY_BREAKPOINT_OFFSET, then this
	504	default implementation of CALL_DUMMY_HAS_COMPLETED is sufficient.
	505	Else, a target may wish to supply an implementation that works in
	506	the presense of multiple breakpoints in its call dummy.
c5aa993b	507	*/
c906108c SS	508	#if !defined(CALL_DUMMY_HAS_COMPLETED)
	509	#define CALL_DUMMY_HAS_COMPLETED(pc, sp, frame_address) \
	510	PC_IN_CALL_DUMMY((pc), (sp), (frame_address))
	511	#endif
	512
	513	/* If STARTUP_WITH_SHELL is set, GDB's "run"
	514	will attempts to start up the debugee under a shell.
	515	This is in order for argument-expansion to occur. E.g.,
	516	(gdb) run *
	517	The "*" gets expanded by the shell into a list of files.
	518	While this is a nice feature, it turns out to interact badly
	519	with some of the catch-fork/catch-exec features we have added.
	520	In particular, if the shell does any fork/exec's before
	521	the exec of the target program, that can confuse GDB.
	522	To disable this feature, set STARTUP_WITH_SHELL to 0.
	523	To enable this feature, set STARTUP_WITH_SHELL to 1.
	524	The catch-exec traps expected during start-up will
	525	be 1 if target is not started up with a shell, 2 if it is.
	526	- RT
	527	If you disable this, you need to decrement
	528	START_INFERIOR_TRAPS_EXPECTED in tm.h. */
	529	#define STARTUP_WITH_SHELL 1
	530	#if !defined(START_INFERIOR_TRAPS_EXPECTED)
	531	#define START_INFERIOR_TRAPS_EXPECTED 2
	532	#endif
	533	#endif /* !defined (INFERIOR_H) */