[thirdparty/binutils-gdb.git] / gdb / ser-unix.c

/* Serial interface for local (hardwired) serial ports on Un*x like systems
   Copyright 1992, 1993, 1994 Free Software Foundation, Inc.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#include "defs.h"
#include "serial.h"
#include <fcntl.h>
#include <sys/types.h>
#include "terminal.h"
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif

#ifdef HAVE_TERMIOS

struct hardwire_ttystate
{
  struct termios termios;
};
#endif /* termios */

#ifdef HAVE_TERMIO

/* It is believed that all systems which have added job control to SVR3
   (e.g. sco) have also added termios.  Even if not, trying to figure out
   all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
   bewildering.  So we don't attempt it.  */

struct hardwire_ttystate
{
  struct termio termio;
};
#endif /* termio */

#ifdef HAVE_SGTTY
/* Needed for the code which uses select().  We would include <sys/select.h>
   too if it existed on all systems.  */
#include <sys/time.h>

struct hardwire_ttystate
{
  struct sgttyb sgttyb;
  struct tchars tc;
  struct ltchars ltc;
  /* Line discipline flags.  */
  int lmode;
};
#endif /* sgtty */

static int hardwire_open PARAMS ((serial_t scb, const char *name));
static void hardwire_raw PARAMS ((serial_t scb));
static int wait_for PARAMS ((serial_t scb, int timeout));
static int hardwire_readchar PARAMS ((serial_t scb, int timeout));
static int rate_to_code PARAMS ((int rate));
static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate));
static int hardwire_write PARAMS ((serial_t scb, const char *str, int len));
static void hardwire_close PARAMS ((serial_t scb));
static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb));
static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
static int hardwire_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate,
						   serial_ttystate));
static void hardwire_print_tty_state PARAMS ((serial_t, serial_ttystate));
static int hardwire_flush_output PARAMS ((serial_t));
static int hardwire_flush_input PARAMS ((serial_t));
static int hardwire_send_break PARAMS ((serial_t));
static int hardwire_setstopbits PARAMS ((serial_t, int));

/* Open up a real live device for serial I/O */

static int
hardwire_open(scb, name)
     serial_t scb;
     const char *name;
{
  scb->fd = open (name, O_RDWR);
  if (scb->fd < 0)
    return -1;

  return 0;
}

static int
get_tty_state(scb, state)
     serial_t scb;
     struct hardwire_ttystate *state;
{
#ifdef HAVE_TERMIOS
  extern int errno;

  if (tcgetattr(scb->fd, &state->termios) < 0)
    return -1;

  return 0;
#endif

#ifdef HAVE_TERMIO
  if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
    return -1;
  return 0;
#endif

#ifdef HAVE_SGTTY
  if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
    return -1;
  if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
    return -1;
  if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
    return -1;
  if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
    return -1;

  return 0;
#endif
}

static int
set_tty_state(scb, state)
     serial_t scb;
     struct hardwire_ttystate *state;
{
#ifdef HAVE_TERMIOS
  if (tcsetattr(scb->fd, TCSANOW, &state->termios) < 0)
    return -1;

  return 0;
#endif

#ifdef HAVE_TERMIO
  if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
    return -1;
  return 0;
#endif

#ifdef HAVE_SGTTY
  if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
    return -1;
  if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
    return -1;
  if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
    return -1;
  if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
    return -1;

  return 0;
#endif
}

static serial_ttystate
hardwire_get_tty_state(scb)
     serial_t scb;
{
  struct hardwire_ttystate *state;

  state = (struct hardwire_ttystate *)xmalloc(sizeof *state);

  if (get_tty_state(scb, state))
    return NULL;

  return (serial_ttystate)state;
}

static int
hardwire_set_tty_state(scb, ttystate)
     serial_t scb;
     serial_ttystate ttystate;
{
  struct hardwire_ttystate *state;

  state = (struct hardwire_ttystate *)ttystate;

  return set_tty_state(scb, state);
}

static int
hardwire_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
     serial_t scb;
     serial_ttystate new_ttystate;
     serial_ttystate old_ttystate;
{
  struct hardwire_ttystate new_state;
#ifdef HAVE_SGTTY
  struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
#endif

  new_state = *(struct hardwire_ttystate *)new_ttystate;

  /* Don't change in or out of raw mode; we don't want to flush input.
     termio and termios have no such restriction; for them flushing input
     is separate from setting the attributes.  */

#ifdef HAVE_SGTTY
  if (state->sgttyb.sg_flags & RAW)
    new_state.sgttyb.sg_flags |= RAW;
  else
    new_state.sgttyb.sg_flags &= ~RAW;

  /* I'm not sure whether this is necessary; the manpage just mentions
     RAW not CBREAK.  */
  if (state->sgttyb.sg_flags & CBREAK)
    new_state.sgttyb.sg_flags |= CBREAK;
  else
    new_state.sgttyb.sg_flags &= ~CBREAK;
#endif

  return set_tty_state (scb, &new_state);
}

static void
hardwire_print_tty_state (scb, ttystate)
     serial_t scb;
     serial_ttystate ttystate;
{
  struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate;
  int i;

#ifdef HAVE_TERMIOS
  printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
		   state->termios.c_iflag, state->termios.c_oflag);
  printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x\n",
		   state->termios.c_cflag, state->termios.c_lflag);
#if 0
  /* This not in POSIX, and is not really documented by those systems
     which have it (at least not Sun).  */
  printf_filtered ("c_line = 0x%x.\n", state->termios.c_line);
#endif
  printf_filtered ("c_cc: ");
  for (i = 0; i < NCCS; i += 1)
    printf_filtered ("0x%x ", state->termios.c_cc[i]);
  printf_filtered ("\n");
#endif

#ifdef HAVE_TERMIO
  printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
		   state->termio.c_iflag, state->termio.c_oflag);
  printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
		   state->termio.c_cflag, state->termio.c_lflag,
		   state->termio.c_line);
  printf_filtered ("c_cc: ");
  for (i = 0; i < NCC; i += 1)
    printf_filtered ("0x%x ", state->termio.c_cc[i]);
  printf_filtered ("\n");
#endif

#ifdef HAVE_SGTTY
  printf_filtered ("sgttyb.sg_flags = 0x%x.\n", state->sgttyb.sg_flags);

  printf_filtered ("tchars: ");
  for (i = 0; i < (int)sizeof (struct tchars); i++)
    printf_filtered ("0x%x ", ((unsigned char *)&state->tc)[i]);
  printf_filtered ("\n");

  printf_filtered ("ltchars: ");
  for (i = 0; i < (int)sizeof (struct ltchars); i++)
    printf_filtered ("0x%x ", ((unsigned char *)&state->ltc)[i]);
  printf_filtered ("\n");

  printf_filtered ("lmode:  0x%x\n", state->lmode);
#endif
}

static int
hardwire_flush_output (scb)
     serial_t scb;
{
#ifdef HAVE_TERMIOS
  return tcflush (scb->fd, TCOFLUSH);
#endif

#ifdef HAVE_TERMIO
  return ioctl (scb->fd, TCFLSH, 1);
#endif

#ifdef HAVE_SGTTY
  /* This flushes both input and output, but we can't do better.  */
  return ioctl (scb->fd, TIOCFLUSH, 0);
#endif  
}

static int
hardwire_flush_input (scb)
     serial_t scb;
{
  scb->bufcnt = 0;
  scb->bufp = scb->buf;

#ifdef HAVE_TERMIOS
  return tcflush (scb->fd, TCIFLUSH);
#endif

#ifdef HAVE_TERMIO
  return ioctl (scb->fd, TCFLSH, 0);
#endif

#ifdef HAVE_SGTTY
  /* This flushes both input and output, but we can't do better.  */
  return ioctl (scb->fd, TIOCFLUSH, 0);
#endif  
}

static int
hardwire_send_break (scb)
     serial_t scb;
{
#ifdef HAVE_TERMIOS
  return tcsendbreak (scb->fd, 0);
#endif

#ifdef HAVE_TERMIO
  return ioctl (scb->fd, TCSBRK, 0);
#endif

#ifdef HAVE_SGTTY
  {
    int status;
    struct timeval timeout;

    status = ioctl (scb->fd, TIOCSBRK, 0);

    /* Can't use usleep; it doesn't exist in BSD 4.2.  */
    /* Note that if this select() is interrupted by a signal it will not wait
       the full length of time.  I think that is OK.  */
    timeout.tv_sec = 0;
    timeout.tv_usec = 250000;
    select (0, 0, 0, 0, &timeout);
    status = ioctl (scb->fd, TIOCCBRK, 0);
    return status;
  }
#endif  
}

static void
hardwire_raw(scb)
     serial_t scb;
{
  struct hardwire_ttystate state;

  if (get_tty_state(scb, &state))
    fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));

#ifdef HAVE_TERMIOS
  state.termios.c_iflag = 0;
  state.termios.c_oflag = 0;
  state.termios.c_lflag = 0;
  state.termios.c_cflag &= ~(CSIZE|PARENB);
  state.termios.c_cflag |= CLOCAL | CS8;
  state.termios.c_cc[VMIN] = 0;
  state.termios.c_cc[VTIME] = 0;
#endif

#ifdef HAVE_TERMIO
  state.termio.c_iflag = 0;
  state.termio.c_oflag = 0;
  state.termio.c_lflag = 0;
  state.termio.c_cflag &= ~(CSIZE|PARENB);
  state.termio.c_cflag |= CLOCAL | CS8;
  state.termio.c_cc[VMIN] = 0;
  state.termio.c_cc[VTIME] = 0;
#endif

#ifdef HAVE_SGTTY
  state.sgttyb.sg_flags |= RAW | ANYP;
  state.sgttyb.sg_flags &= ~(CBREAK | ECHO);
#endif

  scb->current_timeout = 0;

  if (set_tty_state (scb, &state))
    fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
}

/* Wait for input on scb, with timeout seconds.  Returns 0 on success,
   otherwise SERIAL_TIMEOUT or SERIAL_ERROR.

   For termio{s}, we actually just setup VTIME if necessary, and let the
   timeout occur in the read() in hardwire_read().
 */

static int
wait_for(scb, timeout)
     serial_t scb;
     int timeout;
{
  scb->timeout_remaining = 0;

#ifdef HAVE_SGTTY
  {
    struct timeval tv;
    fd_set readfds;

    FD_ZERO (&readfds);

    tv.tv_sec = timeout;
    tv.tv_usec = 0;

    FD_SET(scb->fd, &readfds);

    while (1)
      {
	int numfds;

	if (timeout >= 0)
	  numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
	else
	  numfds = select(scb->fd+1, &readfds, 0, 0, 0);

	if (numfds <= 0)
	  if (numfds == 0)
	    return SERIAL_TIMEOUT;
	  else if (errno == EINTR)
	    continue;
	  else
	    return SERIAL_ERROR;	/* Got an error from select or poll */

	return 0;
      }
  }
#endif	/* HAVE_SGTTY */

#if defined HAVE_TERMIO || defined HAVE_TERMIOS
  if (timeout == scb->current_timeout)
    return 0;

  scb->current_timeout = timeout;

  {
    struct hardwire_ttystate state;

    if (get_tty_state(scb, &state))
      fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));

#ifdef HAVE_TERMIOS
    if (timeout < 0)
      {
	/* No timeout.  */
	state.termios.c_cc[VTIME] = 0;
	state.termios.c_cc[VMIN] = 1;
      }
    else
      {
	state.termios.c_cc[VMIN] = 0;
	state.termios.c_cc[VTIME] = timeout * 10;
	if (state.termios.c_cc[VTIME] != timeout * 10)
	  {

	    /* If c_cc is an 8-bit signed character, we can't go 
	       bigger than this.  If it is always unsigned, we could use
	       25.  */

	    scb->current_timeout = 12;
	    state.termios.c_cc[VTIME] = scb->current_timeout * 10;
	    scb->timeout_remaining = timeout - scb->current_timeout;
	  }
      }
#endif

#ifdef HAVE_TERMIO
    if (timeout < 0)
      {
	/* No timeout.  */
	state.termio.c_cc[VTIME] = 0;
	state.termio.c_cc[VMIN] = 1;
      }
    else
      {
	state.termio.c_cc[VMIN] = 0;
	state.termio.c_cc[VTIME] = timeout * 10;
	if (state.termio.c_cc[VTIME] != timeout * 10)
	  {
	    /* If c_cc is an 8-bit signed character, we can't go 
	       bigger than this.  If it is always unsigned, we could use
	       25.  */

	    scb->current_timeout = 12;
	    state.termio.c_cc[VTIME] = scb->current_timeout * 10;
	    scb->timeout_remaining = timeout - scb->current_timeout;
	  }
      }
#endif

    if (set_tty_state (scb, &state))
      fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));

    return 0;
  }
#endif	/* HAVE_TERMIO || HAVE_TERMIOS */
}

/* Read a character with user-specified timeout.  TIMEOUT is number of seconds
   to wait, or -1 to wait forever.  Use timeout of 0 to effect a poll.  Returns
   char if successful.  Returns SERIAL_TIMEOUT if timeout expired, EOF if line
   dropped dead, or SERIAL_ERROR for any other error (see errno in that case).  */

static int
hardwire_readchar(scb, timeout)
     serial_t scb;
     int timeout;
{
  int status;

  if (scb->bufcnt-- > 0)
    return *scb->bufp++;

  while (1)
    {
      status = wait_for (scb, timeout);

      if (status < 0)
	return status;

      scb->bufcnt = read (scb->fd, scb->buf, BUFSIZ);

      if (scb->bufcnt <= 0)
	{
	  if (scb->bufcnt == 0)
	    {
	      /* Zero characters means timeout (it could also be EOF, but
		 we don't (yet at least) distinguish).  */
	      if (scb->timeout_remaining > 0)
		{
		  timeout = scb->timeout_remaining;
		  continue;
		}
	      else
		return SERIAL_TIMEOUT;
	    }
	  else if (errno == EINTR)
	    continue;
	  else
	    return SERIAL_ERROR;	/* Got an error from read */
	}

      scb->bufcnt--;
      scb->bufp = scb->buf;
      return *scb->bufp++;
    }
}

#ifndef B19200
#define B19200 EXTA
#endif

#ifndef B38400
#define B38400 EXTB
#endif

/* Translate baud rates from integers to damn B_codes.  Unix should
   have outgrown this crap years ago, but even POSIX wouldn't buck it.  */

static struct
{
  int rate;
  int code;
}
baudtab[] =
{
  {50, B50},
  {75, B75},
  {110, B110},
  {134, B134},
  {150, B150},
  {200, B200},
  {300, B300},
  {600, B600},
  {1200, B1200},
  {1800, B1800},
  {2400, B2400},
  {4800, B4800},
  {9600, B9600},
  {19200, B19200},
  {38400, B38400},
  {-1, -1},
};

static int 
rate_to_code(rate)
     int rate;
{
  int i;

  for (i = 0; baudtab[i].rate != -1; i++)
    if (rate == baudtab[i].rate)  
      return baudtab[i].code;

  return -1;
}

static int
hardwire_setbaudrate(scb, rate)
     serial_t scb;
     int rate;
{
  struct hardwire_ttystate state;

  if (get_tty_state(scb, &state))
    return -1;

#ifdef HAVE_TERMIOS
  cfsetospeed (&state.termios, rate_to_code (rate));
  cfsetispeed (&state.termios, rate_to_code (rate));
#endif

#ifdef HAVE_TERMIO
#ifndef CIBAUD
#define CIBAUD CBAUD
#endif

  state.termio.c_cflag &= ~(CBAUD | CIBAUD);
  state.termio.c_cflag |= rate_to_code (rate);
#endif

#ifdef HAVE_SGTTY
  state.sgttyb.sg_ispeed = rate_to_code (rate);
  state.sgttyb.sg_ospeed = rate_to_code (rate);
#endif

  return set_tty_state (scb, &state);
}

static int
hardwire_setstopbits(scb, num)
     serial_t scb;
     int num;
{
  struct hardwire_ttystate state;
  int newbit;

  if (get_tty_state(scb, &state))
    return -1;

  switch (num)
    {
    case SERIAL_1_STOPBITS:
      newbit = 0;
      break;
    case SERIAL_1_AND_A_HALF_STOPBITS:
    case SERIAL_2_STOPBITS:
      newbit = 1;
      break;
    default:
      return 1;
    }

#ifdef HAVE_TERMIOS
  if (!newbit)
    state.termios.c_cflag &= ~CSTOPB;
  else
    state.termios.c_cflag |= CSTOPB; /* two bits */
#endif

#ifdef HAVE_TERMIO
  if (!newbit)
    state.termio.c_cflag &= ~CSTOPB;
  else
    state.termio.c_cflag |= CSTOPB; /* two bits */
#endif

#ifdef HAVE_SGTTY
  return 0;			/* sgtty doesn't support this */
#endif

  return set_tty_state (scb, &state);
}

static int
hardwire_write(scb, str, len)
     serial_t scb;
     const char *str;
     int len;
{
  int cc;

  while (len > 0)
    {
      cc = write(scb->fd, str, len);

      if (cc < 0)
	return 1;
      len -= cc;
      str += cc;
    }
  return 0;
}

static void
hardwire_close(scb)
     serial_t scb;
{
  if (scb->fd < 0)
    return;

  close(scb->fd);
  scb->fd = -1;
}

static struct serial_ops hardwire_ops =
{
  "hardwire",
  0,
  hardwire_open,
  hardwire_close,
  hardwire_readchar,
  hardwire_write,
  hardwire_flush_output,
  hardwire_flush_input,
  hardwire_send_break,
  hardwire_raw,
  hardwire_get_tty_state,
  hardwire_set_tty_state,
  hardwire_print_tty_state,
  hardwire_noflush_set_tty_state,
  hardwire_setbaudrate,
  hardwire_setstopbits,
};

void
_initialize_ser_hardwire ()
{
  serial_add_interface (&hardwire_ops);
}
Commit	Line	Data
4e772f44	1	/* Serial interface for local (hardwired) serial ports on Un*x like systems
5c07a10b	2	Copyright 1992, 1993, 1994 Free Software Foundation, Inc.
4e772f44 SG	3
	4	This file is part of GDB.
	5
	6	This program is free software; you can redistribute it and/or modify
	7	it under the terms of the GNU General Public License as published by
	8	the Free Software Foundation; either version 2 of the License, or
	9	(at your option) any later version.
	10
	11	This program is distributed in the hope that it will be useful,
	12	but WITHOUT ANY WARRANTY; without even the implied warranty of
	13	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	14	GNU General Public License for more details.
	15
	16	You should have received a copy of the GNU General Public License
	17	along with this program; if not, write to the Free Software
6c9638b4	18	Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
4e772f44 SG	19
	20	#include "defs.h"
	21	#include "serial.h"
	22	#include <fcntl.h>
	23	#include <sys/types.h>
dedcc91d SC	24	#include "terminal.h"
	25	#ifdef HAVE_UNISTD_H
	26	#include <unistd.h>
4e772f44 SG	27	#endif
	28
	29	#ifdef HAVE_TERMIOS
38dc5e12 SG	30
	31	struct hardwire_ttystate
	32	{
	33	struct termios termios;
	34	};
dc34b11d	35	#endif /* termios */
38dc5e12	36
4e772f44	37	#ifdef HAVE_TERMIO
38dc5e12	38
dc34b11d JK	39	/* It is believed that all systems which have added job control to SVR3
	40	(e.g. sco) have also added termios. Even if not, trying to figure out
	41	all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
	42	bewildering. So we don't attempt it. */
	43
38dc5e12 SG	44	struct hardwire_ttystate
	45	{
	46	struct termio termio;
	47	};
dc34b11d	48	#endif /* termio */
38dc5e12	49
4e772f44	50	#ifdef HAVE_SGTTY
68d2db62 JK	51	/* Needed for the code which uses select(). We would include <sys/select.h>
	52	too if it existed on all systems. */
	53	#include <sys/time.h>
	54
38dc5e12 SG	55	struct hardwire_ttystate
	56	{
	57	struct sgttyb sgttyb;
c2e247c4 JK	58	struct tchars tc;
	59	struct ltchars ltc;
	60	/* Line discipline flags. */
	61	int lmode;
38dc5e12	62	};
dc34b11d	63	#endif /* sgtty */
4e772f44	64
9775789d SG	65	static int hardwire_open PARAMS ((serial_t scb, const char *name));
	66	static void hardwire_raw PARAMS ((serial_t scb));
	67	static int wait_for PARAMS ((serial_t scb, int timeout));
	68	static int hardwire_readchar PARAMS ((serial_t scb, int timeout));
	69	static int rate_to_code PARAMS ((int rate));
	70	static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate));
	71	static int hardwire_write PARAMS ((serial_t scb, const char *str, int len));
9775789d	72	static void hardwire_close PARAMS ((serial_t scb));
38dc5e12 SG	73	static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
	74	static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
	75	static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb));
	76	static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
b607efe7 FF	77	static int hardwire_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate,
	78	serial_ttystate));
	79	static void hardwire_print_tty_state PARAMS ((serial_t, serial_ttystate));
	80	static int hardwire_flush_output PARAMS ((serial_t));
	81	static int hardwire_flush_input PARAMS ((serial_t));
	82	static int hardwire_send_break PARAMS ((serial_t));
	83	static int hardwire_setstopbits PARAMS ((serial_t, int));
9775789d	84
4e772f44 SG	85	/* Open up a real live device for serial I/O */
	86
	87	static int
	88	hardwire_open(scb, name)
	89	serial_t scb;
	90	const char *name;
	91	{
	92	scb->fd = open (name, O_RDWR);
	93	if (scb->fd < 0)
4febd102	94	return -1;
4e772f44 SG	95
	96	return 0;
	97	}
	98
38dc5e12 SG	99	static int
38dc5e12 SG	100	get_tty_state(scb, state)
4e772f44	101	serial_t scb;
38dc5e12	102	struct hardwire_ttystate *state;
4e772f44 SG	103	{
4e772f44 SG	104	#ifdef HAVE_TERMIOS
057c2f47	105	extern int errno;
c2e247c4 JK	106
	107	if (tcgetattr(scb->fd, &state->termios) < 0)
	108	return -1;
	109
c2e247c4	110	return 0;
38dc5e12	111	#endif
4e772f44	112
38dc5e12	113	#ifdef HAVE_TERMIO
c2e247c4 JK	114	if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
c2e247c4 JK	115	return -1;
dc34b11d	116	return 0;
38dc5e12	117	#endif
4e772f44	118
38dc5e12	119	#ifdef HAVE_SGTTY
c2e247c4 JK	120	if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
	121	return -1;
	122	if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
	123	return -1;
	124	if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
	125	return -1;
	126	if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
	127	return -1;
	128
a14a8fad	129	return 0;
38dc5e12 SG	130	#endif
38dc5e12 SG	131	}
4e772f44	132
38dc5e12 SG	133	static int
	134	set_tty_state(scb, state)
	135	serial_t scb;
	136	struct hardwire_ttystate *state;
	137	{
38dc5e12	138	#ifdef HAVE_TERMIOS
c2e247c4 JK	139	if (tcsetattr(scb->fd, TCSANOW, &state->termios) < 0)
	140	return -1;
	141
a14a8fad	142	return 0;
4e772f44 SG	143	#endif
	144
	145	#ifdef HAVE_TERMIO
c2e247c4 JK	146	if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
c2e247c4 JK	147	return -1;
c2e247c4	148	return 0;
38dc5e12	149	#endif
4e772f44	150
38dc5e12	151	#ifdef HAVE_SGTTY
c2e247c4 JK	152	if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
c2e247c4 JK	153	return -1;
88cc9a42 RP	154	if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
	155	return -1;
	156	if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
	157	return -1;
	158	if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
	159	return -1;
c2e247c4	160
a14a8fad	161	return 0;
38dc5e12 SG	162	#endif
38dc5e12 SG	163	}
4e772f44	164
38dc5e12 SG	165	static serial_ttystate
	166	hardwire_get_tty_state(scb)
	167	serial_t scb;
	168	{
	169	struct hardwire_ttystate *state;
4e772f44	170
38dc5e12	171	state = (struct hardwire_ttystate )xmalloc(sizeof state);
4e772f44	172
38dc5e12 SG	173	if (get_tty_state(scb, state))
38dc5e12 SG	174	return NULL;
4e772f44	175
38dc5e12 SG	176	return (serial_ttystate)state;
38dc5e12 SG	177	}
4e772f44	178
38dc5e12 SG	179	static int
	180	hardwire_set_tty_state(scb, ttystate)
	181	serial_t scb;
	182	serial_ttystate ttystate;
	183	{
	184	struct hardwire_ttystate *state;
4e772f44	185
38dc5e12 SG	186	state = (struct hardwire_ttystate *)ttystate;
	187
	188	return set_tty_state(scb, state);
	189	}
	190
c2e247c4 JK	191	static int
	192	hardwire_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
	193	serial_t scb;
	194	serial_ttystate new_ttystate;
	195	serial_ttystate old_ttystate;
	196	{
3fe11d47	197	struct hardwire_ttystate new_state;
6b14af2b	198	#ifdef HAVE_SGTTY
c2e247c4	199	struct hardwire_ttystate state = (struct hardwire_ttystate ) old_ttystate;
6b14af2b	200	#endif
c2e247c4	201
3fe11d47 JK	202	new_state = (struct hardwire_ttystate )new_ttystate;
3fe11d47 JK	203
d881dd86 JK	204	/* Don't change in or out of raw mode; we don't want to flush input.
	205	termio and termios have no such restriction; for them flushing input
	206	is separate from setting the attributes. */
c2e247c4 JK	207
	208	#ifdef HAVE_SGTTY
	209	if (state->sgttyb.sg_flags & RAW)
	210	new_state.sgttyb.sg_flags \|= RAW;
	211	else
	212	new_state.sgttyb.sg_flags &= ~RAW;
	213
	214	/* I'm not sure whether this is necessary; the manpage just mentions
	215	RAW not CBREAK. */
	216	if (state->sgttyb.sg_flags & CBREAK)
	217	new_state.sgttyb.sg_flags \|= CBREAK;
	218	else
	219	new_state.sgttyb.sg_flags &= ~CBREAK;
	220	#endif
	221
	222	return set_tty_state (scb, &new_state);
	223	}
	224
	225	static void
	226	hardwire_print_tty_state (scb, ttystate)
	227	serial_t scb;
	228	serial_ttystate ttystate;
	229	{
	230	struct hardwire_ttystate state = (struct hardwire_ttystate ) ttystate;
	231	int i;
	232
dc34b11d	233	#ifdef HAVE_TERMIOS
c2e247c4 JK	234	printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
c2e247c4 JK	235	state->termios.c_iflag, state->termios.c_oflag);
a77a5278 JK	236	printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x\n",
	237	state->termios.c_cflag, state->termios.c_lflag);
	238	#if 0
	239	/* This not in POSIX, and is not really documented by those systems
	240	which have it (at least not Sun). */
	241	printf_filtered ("c_line = 0x%x.\n", state->termios.c_line);
	242	#endif
c2e247c4 JK	243	printf_filtered ("c_cc: ");
	244	for (i = 0; i < NCCS; i += 1)
	245	printf_filtered ("0x%x ", state->termios.c_cc[i]);
	246	printf_filtered ("\n");
	247	#endif
	248
	249	#ifdef HAVE_TERMIO
	250	printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
	251	state->termio.c_iflag, state->termio.c_oflag);
	252	printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
	253	state->termio.c_cflag, state->termio.c_lflag,
	254	state->termio.c_line);
	255	printf_filtered ("c_cc: ");
	256	for (i = 0; i < NCC; i += 1)
	257	printf_filtered ("0x%x ", state->termio.c_cc[i]);
	258	printf_filtered ("\n");
	259	#endif
	260
	261	#ifdef HAVE_SGTTY
	262	printf_filtered ("sgttyb.sg_flags = 0x%x.\n", state->sgttyb.sg_flags);
	263
	264	printf_filtered ("tchars: ");
	265	for (i = 0; i < (int)sizeof (struct tchars); i++)
	266	printf_filtered ("0x%x ", ((unsigned char *)&state->tc)[i]);
	267	printf_filtered ("\n");
	268
	269	printf_filtered ("ltchars: ");
	270	for (i = 0; i < (int)sizeof (struct ltchars); i++)
	271	printf_filtered ("0x%x ", ((unsigned char *)&state->ltc)[i]);
	272	printf_filtered ("\n");
	273
	274	printf_filtered ("lmode: 0x%x\n", state->lmode);
	275	#endif
	276	}
	277
	278	static int
	279	hardwire_flush_output (scb)
	280	serial_t scb;
	281	{
	282	#ifdef HAVE_TERMIOS
	283	return tcflush (scb->fd, TCOFLUSH);
	284	#endif
	285
	286	#ifdef HAVE_TERMIO
	287	return ioctl (scb->fd, TCFLSH, 1);
	288	#endif
	289
	290	#ifdef HAVE_SGTTY
	291	/* This flushes both input and output, but we can't do better. */
	292	return ioctl (scb->fd, TIOCFLUSH, 0);
	293	#endif
	294	}
	295
704deef2 JK	296	static int
	297	hardwire_flush_input (scb)
	298	serial_t scb;
	299	{
dedcc91d SC	300	scb->bufcnt = 0;
	301	scb->bufp = scb->buf;
	302
704deef2 JK	303	#ifdef HAVE_TERMIOS
	304	return tcflush (scb->fd, TCIFLUSH);
	305	#endif
	306
	307	#ifdef HAVE_TERMIO
	308	return ioctl (scb->fd, TCFLSH, 0);
	309	#endif
	310
	311	#ifdef HAVE_SGTTY
	312	/* This flushes both input and output, but we can't do better. */
	313	return ioctl (scb->fd, TIOCFLUSH, 0);
	314	#endif
	315	}
	316
	317	static int
	318	hardwire_send_break (scb)
	319	serial_t scb;
	320	{
704deef2 JK	321	#ifdef HAVE_TERMIOS
	322	return tcsendbreak (scb->fd, 0);
	323	#endif
	324
	325	#ifdef HAVE_TERMIO
	326	return ioctl (scb->fd, TCSBRK, 0);
	327	#endif
	328
	329	#ifdef HAVE_SGTTY
95a98b5e	330	{
0ac0a9f6	331	int status;
95a98b5e JK	332	struct timeval timeout;
	333
	334	status = ioctl (scb->fd, TIOCSBRK, 0);
	335
	336	/* Can't use usleep; it doesn't exist in BSD 4.2. */
	337	/* Note that if this select() is interrupted by a signal it will not wait
	338	the full length of time. I think that is OK. */
	339	timeout.tv_sec = 0;
	340	timeout.tv_usec = 250000;
	341	select (0, 0, 0, 0, &timeout);
	342	status = ioctl (scb->fd, TIOCCBRK, 0);
	343	return status;
	344	}
704deef2 JK	345	#endif
	346	}
	347
38dc5e12 SG	348	static void
	349	hardwire_raw(scb)
	350	serial_t scb;
	351	{
	352	struct hardwire_ttystate state;
	353
	354	if (get_tty_state(scb, &state))
199b2450	355	fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
38dc5e12 SG	356
	357	#ifdef HAVE_TERMIOS
	358	state.termios.c_iflag = 0;
	359	state.termios.c_oflag = 0;
	360	state.termios.c_lflag = 0;
	361	state.termios.c_cflag &= ~(CSIZE\|PARENB);
2e6784a8	362	state.termios.c_cflag \|= CLOCAL \| CS8;
38dc5e12 SG	363	state.termios.c_cc[VMIN] = 0;
	364	state.termios.c_cc[VTIME] = 0;
	365	#endif
	366
	367	#ifdef HAVE_TERMIO
	368	state.termio.c_iflag = 0;
	369	state.termio.c_oflag = 0;
	370	state.termio.c_lflag = 0;
	371	state.termio.c_cflag &= ~(CSIZE\|PARENB);
2e6784a8	372	state.termio.c_cflag \|= CLOCAL \| CS8;
38dc5e12 SG	373	state.termio.c_cc[VMIN] = 0;
	374	state.termio.c_cc[VTIME] = 0;
	375	#endif
	376
	377	#ifdef HAVE_SGTTY
	378	state.sgttyb.sg_flags \|= RAW \| ANYP;
	379	state.sgttyb.sg_flags &= ~(CBREAK \| ECHO);
4e772f44	380	#endif
9e15da4a SG	381
9e15da4a SG	382	scb->current_timeout = 0;
38dc5e12 SG	383
38dc5e12 SG	384	if (set_tty_state (scb, &state))
199b2450	385	fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
4e772f44 SG	386	}
4e772f44 SG	387
9e15da4a SG	388	/* Wait for input on scb, with timeout seconds. Returns 0 on success,
	389	otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
	390
	391	For termio{s}, we actually just setup VTIME if necessary, and let the
	392	timeout occur in the read() in hardwire_read().
	393	*/
4e772f44 SG	394
4e772f44 SG	395	static int
9775789d	396	wait_for(scb, timeout)
4e772f44 SG	397	serial_t scb;
	398	int timeout;
	399	{
9db58d3a JK	400	scb->timeout_remaining = 0;
9db58d3a JK	401
9775789d	402	#ifdef HAVE_SGTTY
9db58d3a JK	403	{
	404	struct timeval tv;
	405	fd_set readfds;
eca29634	406
9db58d3a	407	FD_ZERO (&readfds);
eca29634	408
9db58d3a JK	409	tv.tv_sec = timeout;
9db58d3a JK	410	tv.tv_usec = 0;
eca29634	411
9db58d3a	412	FD_SET(scb->fd, &readfds);
eca29634	413
9db58d3a JK	414	while (1)
	415	{
	416	int numfds;
	417
	418	if (timeout >= 0)
	419	numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
a037b21e	420	else
9db58d3a	421	numfds = select(scb->fd+1, &readfds, 0, 0, 0);
a037b21e	422
9db58d3a JK	423	if (numfds <= 0)
	424	if (numfds == 0)
	425	return SERIAL_TIMEOUT;
	426	else if (errno == EINTR)
	427	continue;
	428	else
	429	return SERIAL_ERROR; /* Got an error from select or poll */
9e15da4a	430
9db58d3a JK	431	return 0;
	432	}
	433	}
9775789d	434	#endif /* HAVE_SGTTY */
4e772f44	435
9775789d	436	#if defined HAVE_TERMIO \|\| defined HAVE_TERMIOS
9e15da4a SG	437	if (timeout == scb->current_timeout)
9e15da4a SG	438	return 0;
4e772f44	439
9db58d3a JK	440	scb->current_timeout = timeout;
9db58d3a JK	441
9e15da4a	442	{
38dc5e12	443	struct hardwire_ttystate state;
eca29634	444
38dc5e12	445	if (get_tty_state(scb, &state))
199b2450	446	fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
eca29634	447
38dc5e12	448	#ifdef HAVE_TERMIOS
864df7e6 JK	449	if (timeout < 0)
	450	{
	451	/* No timeout. */
	452	state.termios.c_cc[VTIME] = 0;
	453	state.termios.c_cc[VMIN] = 1;
	454	}
	455	else
	456	{
	457	state.termios.c_cc[VMIN] = 0;
	458	state.termios.c_cc[VTIME] = timeout * 10;
	459	if (state.termios.c_cc[VTIME] != timeout * 10)
	460	{
9db58d3a JK	461
	462	/* If c_cc is an 8-bit signed character, we can't go
	463	bigger than this. If it is always unsigned, we could use
	464	25. */
	465
	466	scb->current_timeout = 12;
	467	state.termios.c_cc[VTIME] = scb->current_timeout * 10;
	468	scb->timeout_remaining = timeout - scb->current_timeout;
864df7e6 JK	469	}
864df7e6 JK	470	}
38dc5e12	471	#endif
9775789d	472
9e15da4a	473	#ifdef HAVE_TERMIO
864df7e6 JK	474	if (timeout < 0)
	475	{
	476	/* No timeout. */
	477	state.termio.c_cc[VTIME] = 0;
	478	state.termio.c_cc[VMIN] = 1;
	479	}
	480	else
	481	{
	482	state.termio.c_cc[VMIN] = 0;
	483	state.termio.c_cc[VTIME] = timeout * 10;
	484	if (state.termio.c_cc[VTIME] != timeout * 10)
	485	{
9db58d3a JK	486	/* If c_cc is an 8-bit signed character, we can't go
	487	bigger than this. If it is always unsigned, we could use
	488	25. */
	489
	490	scb->current_timeout = 12;
5c07a10b	491	state.termio.c_cc[VTIME] = scb->current_timeout * 10;
9db58d3a	492	scb->timeout_remaining = timeout - scb->current_timeout;
864df7e6 JK	493	}
864df7e6 JK	494	}
38dc5e12	495	#endif
9e15da4a	496
38dc5e12	497	if (set_tty_state (scb, &state))
199b2450	498	fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
9e15da4a	499
9e15da4a SG	500	return 0;
	501	}
	502	#endif /* HAVE_TERMIO \|\| HAVE_TERMIOS */
9775789d SG	503	}
	504
	505	/* Read a character with user-specified timeout. TIMEOUT is number of seconds
	506	to wait, or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
057c2f47 RP	507	char if successful. Returns SERIAL_TIMEOUT if timeout expired, EOF if line
057c2f47 RP	508	dropped dead, or SERIAL_ERROR for any other error (see errno in that case). */
9775789d SG	509
	510	static int
	511	hardwire_readchar(scb, timeout)
	512	serial_t scb;
	513	int timeout;
	514	{
	515	int status;
	516
	517	if (scb->bufcnt-- > 0)
	518	return *scb->bufp++;
	519
9db58d3a JK	520	while (1)
	521	{
	522	status = wait_for (scb, timeout);
	523
	524	if (status < 0)
	525	return status;
	526
	527	scb->bufcnt = read (scb->fd, scb->buf, BUFSIZ);
	528
	529	if (scb->bufcnt <= 0)
	530	{
	531	if (scb->bufcnt == 0)
	532	{
	533	/* Zero characters means timeout (it could also be EOF, but
	534	we don't (yet at least) distinguish). */
	535	if (scb->timeout_remaining > 0)
	536	{
	537	timeout = scb->timeout_remaining;
	538	continue;
	539	}
	540	else
	541	return SERIAL_TIMEOUT;
	542	}
2e6784a8 SG	543	else if (errno == EINTR)
2e6784a8 SG	544	continue;
9db58d3a JK	545	else
	546	return SERIAL_ERROR; /* Got an error from read */
	547	}
	548
	549	scb->bufcnt--;
	550	scb->bufp = scb->buf;
	551	return *scb->bufp++;
	552	}
4e772f44 SG	553	}
	554
	555	#ifndef B19200
	556	#define B19200 EXTA
	557	#endif
	558
	559	#ifndef B38400
	560	#define B38400 EXTB
	561	#endif
	562
	563	/* Translate baud rates from integers to damn B_codes. Unix should
	564	have outgrown this crap years ago, but even POSIX wouldn't buck it. */
	565
	566	static struct
	567	{
	568	int rate;
	569	int code;
	570	}
	571	baudtab[] =
	572	{
	573	{50, B50},
	574	{75, B75},
	575	{110, B110},
	576	{134, B134},
	577	{150, B150},
	578	{200, B200},
	579	{300, B300},
	580	{600, B600},
	581	{1200, B1200},
	582	{1800, B1800},
	583	{2400, B2400},
	584	{4800, B4800},
	585	{9600, B9600},
	586	{19200, B19200},
	587	{38400, B38400},
	588	{-1, -1},
	589	};
	590
	591	static int
	592	rate_to_code(rate)
	593	int rate;
	594	{
	595	int i;
	596
	597	for (i = 0; baudtab[i].rate != -1; i++)
	598	if (rate == baudtab[i].rate)
	599	return baudtab[i].code;
	600
	601	return -1;
	602	}
	603
	604	static int
	605	hardwire_setbaudrate(scb, rate)
	606	serial_t scb;
	607	int rate;
	608	{
38dc5e12	609	struct hardwire_ttystate state;
4e772f44	610
38dc5e12	611	if (get_tty_state(scb, &state))
4febd102	612	return -1;
4e772f44	613
38dc5e12 SG	614	#ifdef HAVE_TERMIOS
	615	cfsetospeed (&state.termios, rate_to_code (rate));
	616	cfsetispeed (&state.termios, rate_to_code (rate));
4e772f44 SG	617	#endif
	618
	619	#ifdef HAVE_TERMIO
4e772f44 SG	620	#ifndef CIBAUD
	621	#define CIBAUD CBAUD
	622	#endif
	623
38dc5e12 SG	624	state.termio.c_cflag &= ~(CBAUD \| CIBAUD);
38dc5e12 SG	625	state.termio.c_cflag \|= rate_to_code (rate);
4e772f44 SG	626	#endif
	627
	628	#ifdef HAVE_SGTTY
38dc5e12 SG	629	state.sgttyb.sg_ispeed = rate_to_code (rate);
38dc5e12 SG	630	state.sgttyb.sg_ospeed = rate_to_code (rate);
4e772f44	631	#endif
38dc5e12 SG	632
38dc5e12 SG	633	return set_tty_state (scb, &state);
4e772f44 SG	634	}
4e772f44 SG	635
85c8b135 SG	636	static int
	637	hardwire_setstopbits(scb, num)
	638	serial_t scb;
	639	int num;
	640	{
	641	struct hardwire_ttystate state;
	642	int newbit;
	643
	644	if (get_tty_state(scb, &state))
	645	return -1;
	646
	647	switch (num)
	648	{
	649	case SERIAL_1_STOPBITS:
	650	newbit = 0;
	651	break;
	652	case SERIAL_1_AND_A_HALF_STOPBITS:
	653	case SERIAL_2_STOPBITS:
	654	newbit = 1;
	655	break;
	656	default:
	657	return 1;
	658	}
	659
	660	#ifdef HAVE_TERMIOS
	661	if (!newbit)
	662	state.termios.c_cflag &= ~CSTOPB;
	663	else
	664	state.termios.c_cflag \|= CSTOPB; /* two bits */
	665	#endif
	666
	667	#ifdef HAVE_TERMIO
	668	if (!newbit)
	669	state.termio.c_cflag &= ~CSTOPB;
	670	else
	671	state.termio.c_cflag \|= CSTOPB; /* two bits */
	672	#endif
	673
	674	#ifdef HAVE_SGTTY
	675	return 0; /* sgtty doesn't support this */
	676	#endif
	677
	678	return set_tty_state (scb, &state);
	679	}
	680
4e772f44 SG	681	static int
	682	hardwire_write(scb, str, len)
	683	serial_t scb;
	684	const char *str;
	685	int len;
	686	{
	687	int cc;
	688
	689	while (len > 0)
	690	{
	691	cc = write(scb->fd, str, len);
	692
	693	if (cc < 0)
	694	return 1;
	695	len -= cc;
	696	str += cc;
	697	}
	698	return 0;
	699	}
	700
4e772f44 SG	701	static void
	702	hardwire_close(scb)
	703	serial_t scb;
	704	{
	705	if (scb->fd < 0)
	706	return;
	707
4e772f44 SG	708	close(scb->fd);
	709	scb->fd = -1;
	710	}
	711
	712	static struct serial_ops hardwire_ops =
	713	{
	714	"hardwire",
	715	0,
	716	hardwire_open,
	717	hardwire_close,
	718	hardwire_readchar,
	719	hardwire_write,
c2e247c4	720	hardwire_flush_output,
704deef2 JK	721	hardwire_flush_input,
704deef2 JK	722	hardwire_send_break,
4e772f44	723	hardwire_raw,
38dc5e12 SG	724	hardwire_get_tty_state,
38dc5e12 SG	725	hardwire_set_tty_state,
c2e247c4 JK	726	hardwire_print_tty_state,
c2e247c4 JK	727	hardwire_noflush_set_tty_state,
38dc5e12	728	hardwire_setbaudrate,
85c8b135	729	hardwire_setstopbits,
4e772f44 SG	730	};
4e772f44 SG	731
9775789d	732	void
4e772f44 SG	733	_initialize_ser_hardwire ()
	734	{
	735	serial_add_interface (&hardwire_ops);
	736	}