qdev: Convert uses of qdev_create() with Coccinelle

[thirdparty/qemu.git] / hw / net / etraxfs_eth.c

/*
 * QEMU ETRAX Ethernet Controller.
 *
 * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "qemu/osdep.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
#include "net/net.h"
#include "hw/cris/etraxfs.h"
#include "qemu/error-report.h"
#include "qemu/module.h"
#include "trace.h"

#define D(x)

/* Advertisement control register. */
#define ADVERTISE_10HALF        0x0020  /* Try for 10mbps half-duplex  */
#define ADVERTISE_10FULL        0x0040  /* Try for 10mbps full-duplex  */
#define ADVERTISE_100HALF       0x0080  /* Try for 100mbps half-duplex */
#define ADVERTISE_100FULL       0x0100  /* Try for 100mbps full-duplex */

/*
 * The MDIO extensions in the TDK PHY model were reversed engineered from the
 * linux driver (PHYID and Diagnostics reg).
 * TODO: Add friendly names for the register nums.
 */
struct qemu_phy
{
    uint32_t regs[32];

    int link;

    unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
    void (*write)(struct qemu_phy *phy, unsigned int req, unsigned int data);
};

static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
{
    int regnum;
    unsigned r = 0;

    regnum = req & 0x1f;

    switch (regnum) {
    case 1:
        if (!phy->link) {
            break;
        }
        /* MR1.     */
        /* Speeds and modes.  */
        r |= (1 << 13) | (1 << 14);
        r |= (1 << 11) | (1 << 12);
        r |= (1 << 5); /* Autoneg complete.  */
        r |= (1 << 3); /* Autoneg able.     */
        r |= (1 << 2); /* link.     */
        break;
    case 5:
        /* Link partner ability.
           We are kind; always agree with whatever best mode
           the guest advertises.  */
        r = 1 << 14; /* Success.  */
        /* Copy advertised modes.  */
        r |= phy->regs[4] & (15 << 5);
        /* Autoneg support.  */
        r |= 1;
        break;
    case 18:
    {
        /* Diagnostics reg.  */
        int duplex = 0;
        int speed_100 = 0;

        if (!phy->link) {
            break;
        }

        /* Are we advertising 100 half or 100 duplex ? */
        speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
        speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);

        /* Are we advertising 10 duplex or 100 duplex ? */
        duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
        duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
        r = (speed_100 << 10) | (duplex << 11);
    }
    break;

    default:
        r = phy->regs[regnum];
        break;
    }
    trace_mdio_phy_read(regnum, r);
    return r;
}

static void
tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
{
    int regnum;

    regnum = req & 0x1f;
    trace_mdio_phy_write(regnum, data);
    switch (regnum) {
    default:
        phy->regs[regnum] = data;
        break;
    }
}

static void
tdk_reset(struct qemu_phy *phy)
{
    phy->regs[0] = 0x3100;
    /* PHY Id.  */
    phy->regs[2] = 0x0300;
    phy->regs[3] = 0xe400;
    /* Autonegotiation advertisement reg.  */
    phy->regs[4] = 0x01E1;
    phy->link = 1;
}

struct qemu_mdio
{
    /* bus.     */
    int mdc;
    int mdio;

    /* decoder.  */
    enum {
        PREAMBLE,
        SOF,
        OPC,
        ADDR,
        REQ,
        TURNAROUND,
        DATA
    } state;
    unsigned int drive;

    unsigned int cnt;
    unsigned int addr;
    unsigned int opc;
    unsigned int req;
    unsigned int data;

    struct qemu_phy *devs[32];
};

static void
mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
{
    bus->devs[addr & 0x1f] = phy;
}

#ifdef USE_THIS_DEAD_CODE
static void
mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
{
    bus->devs[addr & 0x1f] = NULL;
}
#endif

static void mdio_read_req(struct qemu_mdio *bus)
{
    struct qemu_phy *phy;

    phy = bus->devs[bus->addr];
    if (phy && phy->read) {
        bus->data = phy->read(phy, bus->req);
    } else {
        bus->data = 0xffff;
    }
}

static void mdio_write_req(struct qemu_mdio *bus)
{
    struct qemu_phy *phy;

    phy = bus->devs[bus->addr];
    if (phy && phy->write) {
        phy->write(phy, bus->req, bus->data);
    }
}

static void mdio_cycle(struct qemu_mdio *bus)
{
    bus->cnt++;

    trace_mdio_bitbang(bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive);
#if 0
    if (bus->mdc) {
        printf("%d", bus->mdio);
    }
#endif
    switch (bus->state) {
    case PREAMBLE:
        if (bus->mdc) {
            if (bus->cnt >= (32 * 2) && !bus->mdio) {
                bus->cnt = 0;
                bus->state = SOF;
                bus->data = 0;
            }
        }
        break;
    case SOF:
        if (bus->mdc) {
            if (bus->mdio != 1) {
                printf("WARNING: no SOF\n");
            }
            if (bus->cnt == 1*2) {
                bus->cnt = 0;
                bus->opc = 0;
                bus->state = OPC;
            }
        }
        break;
    case OPC:
        if (bus->mdc) {
            bus->opc <<= 1;
            bus->opc |= bus->mdio & 1;
            if (bus->cnt == 2*2) {
                bus->cnt = 0;
                bus->addr = 0;
                bus->state = ADDR;
            }
        }
        break;
    case ADDR:
        if (bus->mdc) {
            bus->addr <<= 1;
            bus->addr |= bus->mdio & 1;

            if (bus->cnt == 5*2) {
                bus->cnt = 0;
                bus->req = 0;
                bus->state = REQ;
            }
        }
        break;
    case REQ:
        if (bus->mdc) {
            bus->req <<= 1;
            bus->req |= bus->mdio & 1;
            if (bus->cnt == 5*2) {
                bus->cnt = 0;
                bus->state = TURNAROUND;
            }
        }
        break;
    case TURNAROUND:
        if (bus->mdc && bus->cnt == 2*2) {
            bus->mdio = 0;
            bus->cnt = 0;

            if (bus->opc == 2) {
                bus->drive = 1;
                mdio_read_req(bus);
                bus->mdio = bus->data & 1;
            }
            bus->state = DATA;
        }
        break;
    case DATA:
        if (!bus->mdc) {
            if (bus->drive) {
                bus->mdio = !!(bus->data & (1 << 15));
                bus->data <<= 1;
            }
        } else {
            if (!bus->drive) {
                bus->data <<= 1;
                bus->data |= bus->mdio;
            }
            if (bus->cnt == 16 * 2) {
                bus->cnt = 0;
                bus->state = PREAMBLE;
                if (!bus->drive) {
                    mdio_write_req(bus);
                }
                bus->drive = 0;
            }
        }
        break;
    default:
        break;
    }
}

/* ETRAX-FS Ethernet MAC block starts here.  */

#define RW_MA0_LO      0x00
#define RW_MA0_HI      0x01
#define RW_MA1_LO      0x02
#define RW_MA1_HI      0x03
#define RW_GA_LO      0x04
#define RW_GA_HI      0x05
#define RW_GEN_CTRL      0x06
#define RW_REC_CTRL      0x07
#define RW_TR_CTRL      0x08
#define RW_CLR_ERR      0x09
#define RW_MGM_CTRL      0x0a
#define R_STAT          0x0b
#define FS_ETH_MAX_REGS      0x17

#define TYPE_ETRAX_FS_ETH "etraxfs-eth"
#define ETRAX_FS_ETH(obj) \
    OBJECT_CHECK(ETRAXFSEthState, (obj), TYPE_ETRAX_FS_ETH)

typedef struct ETRAXFSEthState
{
    SysBusDevice parent_obj;

    MemoryRegion mmio;
    NICState *nic;
    NICConf conf;

    /* Two addrs in the filter.  */
    uint8_t macaddr[2][6];
    uint32_t regs[FS_ETH_MAX_REGS];

    struct etraxfs_dma_client *dma_out;
    struct etraxfs_dma_client *dma_in;

    /* MDIO bus.  */
    struct qemu_mdio mdio_bus;
    unsigned int phyaddr;
    int duplex_mismatch;

    /* PHY.     */
    struct qemu_phy phy;
} ETRAXFSEthState;

static void eth_validate_duplex(ETRAXFSEthState *eth)
{
    struct qemu_phy *phy;
    unsigned int phy_duplex;
    unsigned int mac_duplex;
    int new_mm = 0;

    phy = eth->mdio_bus.devs[eth->phyaddr];
    phy_duplex = !!(phy->read(phy, 18) & (1 << 11));
    mac_duplex = !!(eth->regs[RW_REC_CTRL] & 128);

    if (mac_duplex != phy_duplex) {
        new_mm = 1;
    }

    if (eth->regs[RW_GEN_CTRL] & 1) {
        if (new_mm != eth->duplex_mismatch) {
            if (new_mm) {
                printf("HW: WARNING ETH duplex mismatch MAC=%d PHY=%d\n",
                       mac_duplex, phy_duplex);
            } else {
                printf("HW: ETH duplex ok.\n");
            }
        }
        eth->duplex_mismatch = new_mm;
    }
}

static uint64_t
eth_read(void *opaque, hwaddr addr, unsigned int size)
{
    ETRAXFSEthState *eth = opaque;
    uint32_t r = 0;

    addr >>= 2;

    switch (addr) {
    case R_STAT:
        r = eth->mdio_bus.mdio & 1;
        break;
    default:
        r = eth->regs[addr];
        D(printf("%s %x\n", __func__, addr * 4));
        break;
    }
    return r;
}

static void eth_update_ma(ETRAXFSEthState *eth, int ma)
{
    int reg;
    int i = 0;

    ma &= 1;

    reg = RW_MA0_LO;
    if (ma) {
        reg = RW_MA1_LO;
    }

    eth->macaddr[ma][i++] = eth->regs[reg];
    eth->macaddr[ma][i++] = eth->regs[reg] >> 8;
    eth->macaddr[ma][i++] = eth->regs[reg] >> 16;
    eth->macaddr[ma][i++] = eth->regs[reg] >> 24;
    eth->macaddr[ma][i++] = eth->regs[reg + 1];
    eth->macaddr[ma][i] = eth->regs[reg + 1] >> 8;

    D(printf("set mac%d=%x.%x.%x.%x.%x.%x\n", ma,
             eth->macaddr[ma][0], eth->macaddr[ma][1],
             eth->macaddr[ma][2], eth->macaddr[ma][3],
             eth->macaddr[ma][4], eth->macaddr[ma][5]));
}

static void
eth_write(void *opaque, hwaddr addr,
          uint64_t val64, unsigned int size)
{
    ETRAXFSEthState *eth = opaque;
    uint32_t value = val64;

    addr >>= 2;
    switch (addr) {
    case RW_MA0_LO:
    case RW_MA0_HI:
        eth->regs[addr] = value;
        eth_update_ma(eth, 0);
        break;
    case RW_MA1_LO:
    case RW_MA1_HI:
        eth->regs[addr] = value;
        eth_update_ma(eth, 1);
        break;

    case RW_MGM_CTRL:
        /* Attach an MDIO/PHY abstraction.  */
        if (value & 2) {
            eth->mdio_bus.mdio = value & 1;
        }
        if (eth->mdio_bus.mdc != (value & 4)) {
            mdio_cycle(&eth->mdio_bus);
            eth_validate_duplex(eth);
        }
        eth->mdio_bus.mdc = !!(value & 4);
        eth->regs[addr] = value;
        break;

    case RW_REC_CTRL:
        eth->regs[addr] = value;
        eth_validate_duplex(eth);
        break;

    default:
        eth->regs[addr] = value;
        D(printf("%s %x %x\n", __func__, addr, value));
        break;
    }
}

/* The ETRAX FS has a groupt address table (GAT) which works like a k=1 bloom
   filter dropping group addresses we have not joined.    The filter has 64
   bits (m). The has function is a simple nible xor of the group addr.    */
static int eth_match_groupaddr(ETRAXFSEthState *eth, const unsigned char *sa)
{
    unsigned int hsh;
    int m_individual = eth->regs[RW_REC_CTRL] & 4;
    int match;

    /* First bit on the wire of a MAC address signals multicast or
       physical address.  */
    if (!m_individual && !(sa[0] & 1)) {
        return 0;
    }

    /* Calculate the hash index for the GA registers. */
    hsh = 0;
    hsh ^= (*sa) & 0x3f;
    hsh ^= ((*sa) >> 6) & 0x03;
    ++sa;
    hsh ^= ((*sa) << 2) & 0x03c;
    hsh ^= ((*sa) >> 4) & 0xf;
    ++sa;
    hsh ^= ((*sa) << 4) & 0x30;
    hsh ^= ((*sa) >> 2) & 0x3f;
    ++sa;
    hsh ^= (*sa) & 0x3f;
    hsh ^= ((*sa) >> 6) & 0x03;
    ++sa;
    hsh ^= ((*sa) << 2) & 0x03c;
    hsh ^= ((*sa) >> 4) & 0xf;
    ++sa;
    hsh ^= ((*sa) << 4) & 0x30;
    hsh ^= ((*sa) >> 2) & 0x3f;

    hsh &= 63;
    if (hsh > 31) {
        match = eth->regs[RW_GA_HI] & (1 << (hsh - 32));
    } else {
        match = eth->regs[RW_GA_LO] & (1 << hsh);
    }
    D(printf("hsh=%x ga=%x.%x mtch=%d\n", hsh,
             eth->regs[RW_GA_HI], eth->regs[RW_GA_LO], match));
    return match;
}

static ssize_t eth_receive(NetClientState *nc, const uint8_t *buf, size_t size)
{
    unsigned char sa_bcast[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
    ETRAXFSEthState *eth = qemu_get_nic_opaque(nc);
    int use_ma0 = eth->regs[RW_REC_CTRL] & 1;
    int use_ma1 = eth->regs[RW_REC_CTRL] & 2;
    int r_bcast = eth->regs[RW_REC_CTRL] & 8;

    if (size < 12) {
        return -1;
    }

    D(printf("%x.%x.%x.%x.%x.%x ma=%d %d bc=%d\n",
         buf[0], buf[1], buf[2], buf[3], buf[4], buf[5],
         use_ma0, use_ma1, r_bcast));

    /* Does the frame get through the address filters?  */
    if ((!use_ma0 || memcmp(buf, eth->macaddr[0], 6))
        && (!use_ma1 || memcmp(buf, eth->macaddr[1], 6))
        && (!r_bcast || memcmp(buf, sa_bcast, 6))
        && !eth_match_groupaddr(eth, buf)) {
        return size;
    }

    /* FIXME: Find another way to pass on the fake csum.  */
    etraxfs_dmac_input(eth->dma_in, (void *)buf, size + 4, 1);

    return size;
}

static int eth_tx_push(void *opaque, unsigned char *buf, int len, bool eop)
{
    ETRAXFSEthState *eth = opaque;

    D(printf("%s buf=%p len=%d\n", __func__, buf, len));
    qemu_send_packet(qemu_get_queue(eth->nic), buf, len);
    return len;
}

static void eth_set_link(NetClientState *nc)
{
    ETRAXFSEthState *eth = qemu_get_nic_opaque(nc);
    D(printf("%s %d\n", __func__, nc->link_down));
    eth->phy.link = !nc->link_down;
}

static const MemoryRegionOps eth_ops = {
    .read = eth_read,
    .write = eth_write,
    .endianness = DEVICE_LITTLE_ENDIAN,
    .valid = {
        .min_access_size = 4,
        .max_access_size = 4
    }
};

static NetClientInfo net_etraxfs_info = {
    .type = NET_CLIENT_DRIVER_NIC,
    .size = sizeof(NICState),
    .receive = eth_receive,
    .link_status_changed = eth_set_link,
};

static void etraxfs_eth_reset(DeviceState *dev)
{
    ETRAXFSEthState *s = ETRAX_FS_ETH(dev);

    memset(s->regs, 0, sizeof(s->regs));
    memset(s->macaddr, 0, sizeof(s->macaddr));
    s->duplex_mismatch = 0;

    s->mdio_bus.mdc = 0;
    s->mdio_bus.mdio = 0;
    s->mdio_bus.state = 0;
    s->mdio_bus.drive = 0;
    s->mdio_bus.cnt = 0;
    s->mdio_bus.addr = 0;
    s->mdio_bus.opc = 0;
    s->mdio_bus.req = 0;
    s->mdio_bus.data = 0;

    tdk_reset(&s->phy);
}

static void etraxfs_eth_realize(DeviceState *dev, Error **errp)
{
    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
    ETRAXFSEthState *s = ETRAX_FS_ETH(dev);

    if (!s->dma_out || !s->dma_in) {
        error_setg(errp, "Unconnected ETRAX-FS Ethernet MAC");
        return;
    }

    s->dma_out->client.push = eth_tx_push;
    s->dma_out->client.opaque = s;
    s->dma_in->client.opaque = s;
    s->dma_in->client.pull = NULL;

    memory_region_init_io(&s->mmio, OBJECT(dev), &eth_ops, s,
                          "etraxfs-eth", 0x5c);
    sysbus_init_mmio(sbd, &s->mmio);

    qemu_macaddr_default_if_unset(&s->conf.macaddr);
    s->nic = qemu_new_nic(&net_etraxfs_info, &s->conf,
                          object_get_typename(OBJECT(s)), dev->id, s);
    qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);

    s->phy.read = tdk_read;
    s->phy.write = tdk_write;
    mdio_attach(&s->mdio_bus, &s->phy, s->phyaddr);
}

static Property etraxfs_eth_properties[] = {
    DEFINE_PROP_UINT32("phyaddr", ETRAXFSEthState, phyaddr, 1),
    DEFINE_NIC_PROPERTIES(ETRAXFSEthState, conf),
    DEFINE_PROP_END_OF_LIST(),
};

static void etraxfs_eth_class_init(ObjectClass *klass, void *data)
{
    DeviceClass *dc = DEVICE_CLASS(klass);

    dc->realize = etraxfs_eth_realize;
    dc->reset = etraxfs_eth_reset;
    device_class_set_props(dc, etraxfs_eth_properties);
    /* Reason: dma_out, dma_in are not user settable */
    dc->user_creatable = false;
}


/* Instantiate an ETRAXFS Ethernet MAC.  */
DeviceState *
etraxfs_eth_init(NICInfo *nd, hwaddr base, int phyaddr,
                 struct etraxfs_dma_client *dma_out,
                 struct etraxfs_dma_client *dma_in)
{
    DeviceState *dev;
    qemu_check_nic_model(nd, "fseth");

    dev = qdev_new("etraxfs-eth");
    qdev_set_nic_properties(dev, nd);
    qdev_prop_set_uint32(dev, "phyaddr", phyaddr);

    /*
     * TODO: QOM design, define a QOM interface for "I am an etraxfs
     * DMA client" (which replaces the current 'struct
     * etraxfs_dma_client' ad-hoc interface), implement it on the
     * ethernet device, and then have QOM link properties on the DMA
     * controller device so that you can pass the interface
     * implementations to it.
     */
    ETRAX_FS_ETH(dev)->dma_out = dma_out;
    ETRAX_FS_ETH(dev)->dma_in = dma_in;
    qdev_realize_and_unref(dev, NULL, &error_fatal);
    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);

    return dev;
}

static const TypeInfo etraxfs_eth_info = {
    .name          = TYPE_ETRAX_FS_ETH,
    .parent        = TYPE_SYS_BUS_DEVICE,
    .instance_size = sizeof(ETRAXFSEthState),
    .class_init    = etraxfs_eth_class_init,
};

static void etraxfs_eth_register_types(void)
{
    type_register_static(&etraxfs_eth_info);
}

type_init(etraxfs_eth_register_types)