projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 41d91011 PK |
1 | /* |
| 2 | * Copyright 2013 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 41d91011 PK |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * BSC9132 QDS board configuration file | |
| 9 | */ | |
| 10 | ||
| 11 | #ifndef __CONFIG_H | |
| 12 | #define __CONFIG_H | |
| 13 | ||
| 14 | #ifdef CONFIG_BSC9132QDS | |
| 15 | #define CONFIG_BSC9132 | |
| 16 | #endif | |
| 17 | ||
| 18 | #define CONFIG_MISC_INIT_R | |
| 19 | ||
| 20 | #ifdef CONFIG_SDCARD | |
| 21 | #define CONFIG_RAMBOOT_SDCARD | |
| 22 | #define CONFIG_SYS_RAMBOOT | |
| 23 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 24 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
| 25 | #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc | |
| 26 | #endif | |
| 27 | #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 | |
| 28 | #ifdef CONFIG_SPIFLASH | |
| 29 | #define CONFIG_RAMBOOT_SPIFLASH | |
| 30 | #define CONFIG_SYS_RAMBOOT | |
| 31 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 32 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
| 33 | #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc | |
| 34 | #endif | |
| 35 | ||
| 83e0c2bb PK |
36 | #ifdef CONFIG_NAND |
| 37 | #define CONFIG_SPL | |
| 38 | #define CONFIG_SPL_INIT_MINIMAL | |
| 39 | #define CONFIG_SPL_SERIAL_SUPPORT | |
| 40 | #define CONFIG_SPL_NAND_SUPPORT | |
| 41 | #define CONFIG_SPL_NAND_MINIMAL | |
| 42 | #define CONFIG_SPL_FLUSH_IMAGE | |
| 43 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
| 44 | ||
| 45 | #define CONFIG_SYS_TEXT_BASE 0x00201000 | |
| 46 | #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 | |
| 47 | #define CONFIG_SPL_MAX_SIZE 8192 | |
| 48 | #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 | |
| 49 | #define CONFIG_SPL_RELOC_STACK 0x00100000 | |
| 50 | #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) | |
| 51 | #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) | |
| 52 | #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 | |
| 53 | #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 | |
| 54 | #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" | |
| 55 | #endif | |
| 56 | ||
| 41d91011 PK |
57 | #ifndef CONFIG_SYS_TEXT_BASE |
| 58 | #define CONFIG_SYS_TEXT_BASE 0x8ff80000 | |
| 59 | #endif | |
| 60 | ||
| 61 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 62 | #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc | |
| 63 | #endif | |
| 64 | ||
| 83e0c2bb PK |
65 | #ifdef CONFIG_SPL_BUILD |
| 66 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
| 67 | #else | |
| 68 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
| 41d91011 PK |
69 | #endif |
| 70 | ||
| 41d91011 PK |
71 | /* High Level Configuration Options */ |
| 72 | #define CONFIG_BOOKE /* BOOKE */ | |
| 73 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 74 | #define CONFIG_MPC85xx | |
| 75 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
| 76 | #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ | |
| 77 | ||
| 78 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
| 79 | #if defined(CONFIG_PCI) | |
| 80 | #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ | |
| 81 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 842033e6 | 82 | #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ |
| 41d91011 PK |
83 | #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ |
| 84 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 85 | ||
| 86 | #define CONFIG_CMD_NET | |
| 87 | #define CONFIG_CMD_PCI | |
| 88 | ||
| 89 | #define CONFIG_E1000 /* E1000 pci Ethernet card*/ | |
| 90 | ||
| 91 | /* | |
| 92 | * PCI Windows | |
| 93 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 94 | */ | |
| 95 | /* controller 1, Slot 1, tgtid 1, Base address a000 */ | |
| 96 | #define CONFIG_SYS_PCIE1_NAME "PCIe Slot" | |
| 97 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 | |
| 98 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 | |
| 99 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 | |
| 100 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ | |
| 101 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xC0010000 | |
| 102 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 103 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 104 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000 | |
| 105 | ||
| 106 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 107 | ||
| 108 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 109 | #define CONFIG_DOS_PARTITION | |
| 110 | #endif | |
| 111 | ||
| 112 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 113 | #define CONFIG_ENV_OVERWRITE | |
| 114 | #define CONFIG_TSEC_ENET /* ethernet */ | |
| 115 | ||
| 116 | #if defined(CONFIG_SYS_CLK_100_DDR_100) | |
| 117 | #define CONFIG_SYS_CLK_FREQ 100000000 | |
| 118 | #define CONFIG_DDR_CLK_FREQ 100000000 | |
| 119 | #elif defined(CONFIG_SYS_CLK_100_DDR_133) | |
| 120 | #define CONFIG_SYS_CLK_FREQ 100000000 | |
| 121 | #define CONFIG_DDR_CLK_FREQ 133000000 | |
| 122 | #endif | |
| 123 | ||
| 124 | #define CONFIG_MP | |
| 125 | ||
| 126 | #define CONFIG_HWCONFIG | |
| 127 | /* | |
| 128 | * These can be toggled for performance analysis, otherwise use default. | |
| 129 | */ | |
| 130 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
| 131 | #define CONFIG_BTB /* enable branch predition */ | |
| 132 | ||
| 133 | #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ | |
| 134 | #define CONFIG_SYS_MEMTEST_END 0x01ffffff | |
| 135 | ||
| 136 | /* DDR Setup */ | |
| 5614e71b | 137 | #define CONFIG_SYS_FSL_DDR3 |
| 41d91011 PK |
138 | #define CONFIG_SYS_SPD_BUS_NUM 0 |
| 139 | #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ | |
| 140 | #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ | |
| 141 | #define CONFIG_FSL_DDR_INTERACTIVE | |
| 142 | ||
| 143 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
| 144 | ||
| 145 | #define CONFIG_SYS_SDRAM_SIZE (1024) | |
| 146 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 147 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 148 | ||
| 149 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 150 | ||
| 151 | /* DDR3 Controller Settings */ | |
| 152 | #define CONFIG_CHIP_SELECTS_PER_CTRL 1 | |
| 153 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F | |
| 154 | #define CONFIG_SYS_DDR_CS0_CONFIG_1333 0x80004302 | |
| 155 | #define CONFIG_SYS_DDR_CS0_CONFIG_800 0x80014302 | |
| 156 | #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 | |
| 157 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 158 | #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 | |
| 159 | #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 | |
| 160 | #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 | |
| 161 | #define CONFIG_SYS_DDR1_CS0_BNDS 0x0040007F | |
| 162 | ||
| 163 | #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 | |
| 164 | #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 | |
| 165 | #define CONFIG_SYS_DDR_RCW_1 0x00000000 | |
| 166 | #define CONFIG_SYS_DDR_RCW_2 0x00000000 | |
| 167 | #define CONFIG_SYS_DDR_CONTROL_800 0x470C0000 | |
| 168 | #define CONFIG_SYS_DDR_CONTROL_2_800 0x04401050 | |
| 169 | #define CONFIG_SYS_DDR_TIMING_4_800 0x00220001 | |
| 170 | #define CONFIG_SYS_DDR_TIMING_5_800 0x03402400 | |
| 171 | ||
| 172 | #define CONFIG_SYS_DDR_CONTROL_1333 0x470C0008 | |
| 173 | #define CONFIG_SYS_DDR_CONTROL_2_1333 0x24401010 | |
| 174 | #define CONFIG_SYS_DDR_TIMING_4_1333 0x00000001 | |
| 175 | #define CONFIG_SYS_DDR_TIMING_5_1333 0x03401400 | |
| 176 | ||
| 177 | #define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 | |
| 178 | #define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 | |
| 179 | #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4846 | |
| 180 | #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA8C8CF | |
| 181 | #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 | |
| 182 | #define CONFIG_SYS_DDR_MODE_1_800 0x40461520 | |
| 183 | #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 | |
| 184 | #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300000 | |
| 185 | #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 | |
| 186 | ||
| 187 | #define CONFIG_SYS_DDR_TIMING_3_1333 0x01061000 | |
| 188 | #define CONFIG_SYS_DDR_TIMING_0_1333 0x00440104 | |
| 189 | #define CONFIG_SYS_DDR_TIMING_1_1333 0x98913A45 | |
| 190 | #define CONFIG_SYS_DDR_TIMING_2_1333 0x0FB8B114 | |
| 191 | #define CONFIG_SYS_DDR_CLK_CTRL_1333 0x02800000 | |
| 192 | #define CONFIG_SYS_DDR_MODE_1_1333 0x00061A50 | |
| 193 | #define CONFIG_SYS_DDR_MODE_2_1333 0x00100000 | |
| 194 | #define CONFIG_SYS_DDR_INTERVAL_1333 0x144E0513 | |
| 195 | #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333 0x8655F607 | |
| 196 | ||
| 197 | /*FIXME: the following params are constant w.r.t diff freq | |
| 198 | combinations. this should be removed later | |
| 199 | */ | |
| 200 | #if CONFIG_DDR_CLK_FREQ == 100000000 | |
| 201 | #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 | |
| 202 | #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 | |
| 203 | #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 | |
| 204 | #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 | |
| 205 | #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 | |
| 206 | #elif CONFIG_DDR_CLK_FREQ == 133000000 | |
| 207 | #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333 | |
| 208 | #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_1333 | |
| 209 | #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_1333 | |
| 210 | #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333 | |
| 211 | #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333 | |
| 212 | #else | |
| 213 | #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 | |
| 214 | #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 | |
| 215 | #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 | |
| 216 | #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 | |
| 217 | #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 | |
| 218 | #endif | |
| 219 | ||
| 220 | ||
| 221 | /* relocated CCSRBAR */ | |
| 222 | #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT | |
| 223 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT | |
| 224 | ||
| 225 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR | |
| 226 | ||
| 64501c66 PJ |
227 | /* DSP CCSRBAR */ |
| 228 | #define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT | |
| 229 | #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT | |
| 230 | ||
| 41d91011 PK |
231 | /* |
| 232 | * IFC Definitions | |
| 233 | */ | |
| 234 | /* NOR Flash on IFC */ | |
| 83e0c2bb PK |
235 | |
| 236 | #ifdef CONFIG_SPL_BUILD | |
| 237 | #define CONFIG_SYS_NO_FLASH | |
| 238 | #endif | |
| 41d91011 PK |
239 | #define CONFIG_SYS_FLASH_BASE 0x88000000 |
| 240 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ | |
| 241 | ||
| 242 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 243 | ||
| 244 | #define CONFIG_SYS_NOR_CSPR 0x88000101 | |
| 245 | #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) | |
| 246 | #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(5) | |
| 247 | /* NOR Flash Timing Params */ | |
| 248 | ||
| 249 | #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) \ | |
| 250 | | FTIM0_NOR_TEADC(0x03) \ | |
| 251 | | FTIM0_NOR_TAVDS(0x00) \ | |
| 252 | | FTIM0_NOR_TEAHC(0x0f)) | |
| 253 | #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1d) \ | |
| 254 | | FTIM1_NOR_TRAD_NOR(0x09) \ | |
| 255 | | FTIM1_NOR_TSEQRAD_NOR(0x09)) | |
| 256 | #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \ | |
| 257 | | FTIM2_NOR_TCH(0x4) \ | |
| 258 | | FTIM2_NOR_TWPH(0x7) \ | |
| 259 | | FTIM2_NOR_TWP(0x1e)) | |
| 260 | #define CONFIG_SYS_NOR_FTIM3 0x0 | |
| 261 | ||
| 262 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} | |
| 263 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 264 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 265 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 266 | ||
| 267 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 268 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 269 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 270 | ||
| 271 | /* CFI for NOR Flash */ | |
| 272 | #define CONFIG_FLASH_CFI_DRIVER | |
| 273 | #define CONFIG_SYS_FLASH_CFI | |
| 274 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 275 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 276 | ||
| 277 | /* NAND Flash on IFC */ | |
| 278 | #define CONFIG_SYS_NAND_BASE 0xff800000 | |
| 279 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 280 | ||
| 281 | #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 282 | | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ | |
| 283 | | CSPR_MSEL_NAND /* MSEL = NAND */ \ | |
| 284 | | CSPR_V) | |
| 285 | #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) | |
| 286 | ||
| 287 | #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ | |
| 288 | | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ | |
| 289 | | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ | |
| 290 | | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ | |
| 291 | | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ | |
| 292 | | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ | |
| 293 | | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ | |
| 294 | ||
| 295 | /* NAND Flash Timing Params */ | |
| 296 | #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ | |
| 297 | | FTIM0_NAND_TWP(0x05) \ | |
| 298 | | FTIM0_NAND_TWCHT(0x02) \ | |
| 299 | | FTIM0_NAND_TWH(0x04)) | |
| 300 | #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1c) \ | |
| 301 | | FTIM1_NAND_TWBE(0x1e) \ | |
| 302 | | FTIM1_NAND_TRR(0x07) \ | |
| 303 | | FTIM1_NAND_TRP(0x05)) | |
| 304 | #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ | |
| 305 | | FTIM2_NAND_TREH(0x04) \ | |
| 306 | | FTIM2_NAND_TWHRE(0x11)) | |
| 307 | #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) | |
| 308 | ||
| 309 | #define CONFIG_SYS_NAND_DDR_LAW 11 | |
| 310 | ||
| 311 | /* NAND */ | |
| 312 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } | |
| 313 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 314 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
| 315 | #define CONFIG_CMD_NAND | |
| 316 | ||
| 317 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 318 | ||
| 83e0c2bb | 319 | #ifndef CONFIG_SPL_BUILD |
| 41d91011 | 320 | #define CONFIG_FSL_QIXIS |
| 83e0c2bb | 321 | #endif |
| 41d91011 PK |
322 | #ifdef CONFIG_FSL_QIXIS |
| 323 | #define CONFIG_SYS_FPGA_BASE 0xffb00000 | |
| 324 | #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 | |
| 325 | #define QIXIS_BASE CONFIG_SYS_FPGA_BASE | |
| 326 | #define QIXIS_LBMAP_SWITCH 9 | |
| 327 | #define QIXIS_LBMAP_MASK 0x07 | |
| 328 | #define QIXIS_LBMAP_SHIFT 0 | |
| 329 | #define QIXIS_LBMAP_DFLTBANK 0x00 | |
| 330 | #define QIXIS_LBMAP_ALTBANK 0x04 | |
| 331 | #define QIXIS_RST_CTL_RESET 0x83 | |
| 332 | #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 | |
| 333 | #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 | |
| 334 | #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 | |
| 335 | ||
| 336 | #define CONFIG_SYS_FPGA_BASE_PHYS CONFIG_SYS_FPGA_BASE | |
| 337 | ||
| 338 | #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \ | |
| 339 | | CSPR_PORT_SIZE_8 \ | |
| 340 | | CSPR_MSEL_GPCM \ | |
| 341 | | CSPR_V) | |
| 342 | #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) | |
| 343 | #define CONFIG_SYS_CSOR2 0x0 | |
| 344 | /* CPLD Timing parameters for IFC CS3 */ | |
| 345 | #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ | |
| 346 | FTIM0_GPCM_TEADC(0x0e) | \ | |
| 347 | FTIM0_GPCM_TEAHC(0x0e)) | |
| 348 | #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ | |
| 349 | FTIM1_GPCM_TRAD(0x1f)) | |
| 350 | #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ | |
| 351 | FTIM2_GPCM_TCH(0x0) | \ | |
| 352 | FTIM2_GPCM_TWP(0x1f)) | |
| 353 | #define CONFIG_SYS_CS2_FTIM3 0x0 | |
| 354 | #endif | |
| 355 | ||
| 356 | /* Set up IFC registers for boot location NOR/NAND */ | |
| 83e0c2bb PK |
357 | #if defined(CONFIG_NAND) |
| 358 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR | |
| 359 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK | |
| 360 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR | |
| 361 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 362 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 363 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 364 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 365 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR | |
| 366 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK | |
| 367 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR | |
| 368 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 369 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 370 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 371 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 372 | #else | |
| 41d91011 PK |
373 | #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR |
| 374 | #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK | |
| 375 | #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR | |
| 376 | #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 | |
| 377 | #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 | |
| 378 | #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 | |
| 379 | #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 | |
| 380 | #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR | |
| 381 | #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK | |
| 382 | #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR | |
| 383 | #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 | |
| 384 | #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 | |
| 385 | #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 | |
| 386 | #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 | |
| 83e0c2bb | 387 | #endif |
| 41d91011 PK |
388 | |
| 389 | #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ | |
| 390 | #define CONFIG_BOARD_EARLY_INIT_R | |
| 391 | ||
| 392 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 393 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ | |
| 394 | #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ | |
| 395 | ||
| 396 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ | |
| 397 | - GENERATED_GBL_DATA_SIZE) | |
| 398 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 399 | ||
| 400 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ | |
| 401 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ | |
| 402 | ||
| 403 | /* Serial Port */ | |
| 404 | #define CONFIG_CONS_INDEX 1 | |
| 405 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
| 406 | #define CONFIG_SYS_NS16550 | |
| 407 | #define CONFIG_SYS_NS16550_SERIAL | |
| 408 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 409 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 83e0c2bb PK |
410 | #ifdef CONFIG_SPL_BUILD |
| 411 | #define CONFIG_NS16550_MIN_FUNCTIONS | |
| 412 | #endif | |
| 41d91011 PK |
413 | |
| 414 | #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ | |
| 415 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ | |
| 416 | ||
| 417 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 418 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 419 | ||
| 420 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) | |
| 421 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) | |
| 422 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) | |
| 423 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) | |
| 424 | ||
| 425 | /* Use the HUSH parser */ | |
| 426 | #define CONFIG_SYS_HUSH_PARSER /* hush parser */ | |
| 427 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 428 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 429 | #endif | |
| 430 | ||
| 431 | /* | |
| 432 | * Pass open firmware flat tree | |
| 433 | */ | |
| 434 | #define CONFIG_OF_LIBFDT | |
| 435 | #define CONFIG_OF_BOARD_SETUP | |
| 436 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 437 | ||
| 438 | /* new uImage format support */ | |
| 439 | #define CONFIG_FIT | |
| 440 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
| 441 | ||
| 00f792e0 HS |
442 | #define CONFIG_SYS_I2C |
| 443 | #define CONFIG_SYS_I2C_FSL | |
| 444 | #define CONFIG_SYS_FSL_I2C_SPEED 400800 /* I2C speed and slave address*/ | |
| 445 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 446 | #define CONFIG_SYS_FSL_I2C2_SPEED 400800 /* I2C speed and slave address*/ | |
| 447 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 448 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 | |
| 449 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 | |
| 41d91011 PK |
450 | |
| 451 | /* I2C EEPROM */ | |
| 452 | #define CONFIG_ID_EEPROM | |
| 453 | #ifdef CONFIG_ID_EEPROM | |
| 454 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 455 | #endif | |
| 456 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 | |
| 457 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 458 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 459 | ||
| 460 | /* enable read and write access to EEPROM */ | |
| 461 | #define CONFIG_CMD_EEPROM | |
| 462 | #define CONFIG_SYS_I2C_MULTI_EEPROMS | |
| 463 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 464 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 465 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 466 | ||
| 467 | /* I2C FPGA */ | |
| 468 | #define CONFIG_I2C_FPGA | |
| 469 | #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 | |
| 470 | ||
| 471 | #define CONFIG_RTC_DS3231 | |
| 472 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 | |
| 473 | ||
| 474 | /* | |
| 475 | * SPI interface will not be available in case of NAND boot SPI CS0 will be | |
| 476 | * used for SLIC | |
| 477 | */ | |
| 478 | /* eSPI - Enhanced SPI */ | |
| 479 | #define CONFIG_FSL_ESPI /* SPI */ | |
| 480 | #ifdef CONFIG_FSL_ESPI | |
| 481 | #define CONFIG_SPI_FLASH | |
| 482 | #define CONFIG_SPI_FLASH_SPANSION | |
| 483 | #define CONFIG_CMD_SF | |
| 484 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 485 | #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 | |
| 486 | #endif | |
| 487 | ||
| 488 | #if defined(CONFIG_TSEC_ENET) | |
| 489 | ||
| 490 | #define CONFIG_MII /* MII PHY management */ | |
| 491 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
| 492 | #define CONFIG_TSEC1 1 | |
| 493 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
| 494 | #define CONFIG_TSEC2 1 | |
| 495 | #define CONFIG_TSEC2_NAME "eTSEC2" | |
| 496 | ||
| 497 | #define TSEC1_PHY_ADDR 0 | |
| 498 | #define TSEC2_PHY_ADDR 1 | |
| 499 | ||
| 500 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 501 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 502 | ||
| 503 | #define TSEC1_PHYIDX 0 | |
| 504 | #define TSEC2_PHYIDX 0 | |
| 505 | ||
| 506 | #define CONFIG_ETHPRIME "eTSEC1" | |
| 507 | ||
| 508 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 509 | ||
| 510 | /* TBI PHY configuration for SGMII mode */ | |
| 511 | #define CONFIG_TSEC_TBICR_SETTINGS ( \ | |
| 512 | TBICR_PHY_RESET \ | |
| 513 | | TBICR_ANEG_ENABLE \ | |
| 514 | | TBICR_FULL_DUPLEX \ | |
| 515 | | TBICR_SPEED1_SET \ | |
| 516 | ) | |
| 517 | ||
| 518 | #endif /* CONFIG_TSEC_ENET */ | |
| 519 | ||
| 520 | #define CONFIG_MMC | |
| 521 | #ifdef CONFIG_MMC | |
| 522 | #define CONFIG_CMD_MMC | |
| 523 | #define CONFIG_DOS_PARTITION | |
| 524 | #define CONFIG_FSL_ESDHC | |
| 525 | #define CONFIG_GENERIC_MMC | |
| 526 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 527 | #endif | |
| 528 | ||
| 529 | #define CONFIG_USB_EHCI /* USB */ | |
| 530 | #ifdef CONFIG_USB_EHCI | |
| 531 | #define CONFIG_CMD_USB | |
| 532 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 533 | #define CONFIG_USB_EHCI_FSL | |
| 534 | #define CONFIG_USB_STORAGE | |
| 535 | #define CONFIG_HAS_FSL_DR_USB | |
| 536 | #endif | |
| 537 | ||
| 538 | /* | |
| 539 | * Environment | |
| 540 | */ | |
| 41d91011 PK |
541 | #if defined(CONFIG_RAMBOOT_SDCARD) |
| 542 | #define CONFIG_ENV_IS_IN_MMC | |
| 543 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 544 | #define CONFIG_ENV_SIZE 0x2000 | |
| 545 | #elif defined(CONFIG_RAMBOOT_SPIFLASH) | |
| 546 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 547 | #define CONFIG_ENV_SPI_BUS 0 | |
| 548 | #define CONFIG_ENV_SPI_CS 0 | |
| 549 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 550 | #define CONFIG_ENV_SPI_MODE 0 | |
| 551 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 552 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 553 | #define CONFIG_ENV_SIZE 0x2000 | |
| 83e0c2bb PK |
554 | #elif defined(CONFIG_NAND) |
| 555 | #define CONFIG_ENV_IS_IN_NAND | |
| 556 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| 557 | #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 558 | #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) | |
| 559 | #elif defined(CONFIG_SYS_RAMBOOT) | |
| 41d91011 PK |
560 | #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ |
| 561 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) | |
| 562 | #define CONFIG_ENV_SIZE 0x2000 | |
| 41d91011 PK |
563 | #else |
| 564 | #define CONFIG_ENV_IS_IN_FLASH | |
| 565 | #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 | |
| 566 | #define CONFIG_ENV_ADDR 0xfff80000 | |
| 567 | #else | |
| 568 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) | |
| 569 | #endif | |
| 570 | #define CONFIG_ENV_SIZE 0x2000 | |
| 571 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 572 | #endif | |
| 573 | ||
| 574 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 575 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 576 | ||
| 577 | /* | |
| 578 | * Command line configuration. | |
| 579 | */ | |
| 580 | #include <config_cmd_default.h> | |
| 581 | ||
| 582 | #define CONFIG_CMD_DATE | |
| 583 | #define CONFIG_CMD_DHCP | |
| 584 | #define CONFIG_CMD_ELF | |
| 585 | #define CONFIG_CMD_ERRATA | |
| 586 | #define CONFIG_CMD_I2C | |
| 587 | #define CONFIG_CMD_IRQ | |
| 588 | #define CONFIG_CMD_MII | |
| 589 | #define CONFIG_CMD_PING | |
| 590 | #define CONFIG_CMD_SETEXPR | |
| 591 | #define CONFIG_CMD_REGINFO | |
| 592 | ||
| 593 | #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) | |
| 594 | #define CONFIG_CMD_EXT2 | |
| 595 | #define CONFIG_CMD_FAT | |
| 596 | #define CONFIG_DOS_PARTITION | |
| 597 | #endif | |
| 598 | ||
| 599 | /* | |
| 600 | * Miscellaneous configurable options | |
| 601 | */ | |
| 602 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 603 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 604 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 605 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 41d91011 PK |
606 | |
| 607 | #if defined(CONFIG_CMD_KGDB) | |
| 608 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 609 | #else | |
| 610 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 611 | #endif | |
| 612 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 613 | /* Print Buffer Size */ | |
| 614 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 615 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| 41d91011 PK |
616 | |
| 617 | ||
| 618 | /* | |
| 619 | * For booting Linux, the board info and command line data | |
| 620 | * have to be in the first 64 MB of memory, since this is | |
| 621 | * the maximum mapped by the Linux kernel during initialization. | |
| 622 | */ | |
| 623 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ | |
| 624 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 625 | ||
| 626 | #if defined(CONFIG_CMD_KGDB) | |
| 627 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 41d91011 PK |
628 | #endif |
| 629 | ||
| 630 | /* | |
| 631 | * Environment Configuration | |
| 632 | */ | |
| 633 | ||
| 634 | #if defined(CONFIG_TSEC_ENET) | |
| 635 | #define CONFIG_HAS_ETH0 | |
| 636 | #define CONFIG_HAS_ETH1 | |
| 637 | #endif | |
| 638 | ||
| 639 | #define CONFIG_HOSTNAME BSC9132qds | |
| 640 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 641 | #define CONFIG_BOOTFILE "uImage" | |
| 642 | #define CONFIG_UBOOTPATH "u-boot.bin" | |
| 643 | ||
| 644 | #define CONFIG_BAUDRATE 115200 | |
| 645 | ||
| 646 | #ifdef CONFIG_SDCARD | |
| 647 | #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" | |
| 648 | #else | |
| 649 | #define CONFIG_DEF_HWCONFIG "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0" | |
| 650 | #endif | |
| 651 | ||
| 652 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 653 | "netdev=eth0\0" \ | |
| 654 | "uboot=" CONFIG_UBOOTPATH "\0" \ | |
| 655 | "loadaddr=1000000\0" \ | |
| 656 | "bootfile=uImage\0" \ | |
| 657 | "consoledev=ttyS0\0" \ | |
| 658 | "ramdiskaddr=2000000\0" \ | |
| 659 | "ramdiskfile=rootfs.ext2.gz.uboot\0" \ | |
| 660 | "fdtaddr=c00000\0" \ | |
| 661 | "fdtfile=bsc9132qds.dtb\0" \ | |
| 662 | "bdev=sda1\0" \ | |
| 663 | CONFIG_DEF_HWCONFIG\ | |
| 664 | "othbootargs=mem=880M ramdisk_size=600000 " \ | |
| 665 | "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \ | |
| 666 | "isolcpus=0\0" \ | |
| 667 | "usbext2boot=setenv bootargs root=/dev/ram rw " \ | |
| 668 | "console=$consoledev,$baudrate $othbootargs; " \ | |
| 669 | "usb start;" \ | |
| 670 | "ext2load usb 0:4 $loadaddr $bootfile;" \ | |
| 671 | "ext2load usb 0:4 $fdtaddr $fdtfile;" \ | |
| 672 | "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ | |
| 673 | "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ | |
| 674 | "debug_halt_off=mw ff7e0e30 0xf0000000;" | |
| 675 | ||
| 676 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 677 | "setenv bootargs root=/dev/nfs rw " \ | |
| 678 | "nfsroot=$serverip:$rootpath " \ | |
| 679 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 680 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 681 | "tftp $loadaddr $bootfile;" \ | |
| 682 | "tftp $fdtaddr $fdtfile;" \ | |
| 683 | "bootm $loadaddr - $fdtaddr" | |
| 684 | ||
| 685 | #define CONFIG_HDBOOT \ | |
| 686 | "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ | |
| 687 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 688 | "usb start;" \ | |
| 689 | "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ | |
| 690 | "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ | |
| 691 | "bootm $loadaddr - $fdtaddr" | |
| 692 | ||
| 693 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 694 | "setenv bootargs root=/dev/ram rw " \ | |
| 695 | "console=$consoledev,$baudrate $othbootargs; " \ | |
| 696 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 697 | "tftp $loadaddr $bootfile;" \ | |
| 698 | "tftp $fdtaddr $fdtfile;" \ | |
| 699 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 700 | ||
| 701 | #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND | |
| 702 | ||
| 703 | #endif /* __CONFIG_H */ |