[people/ms/u-boot.git] / include / configs / CANBT.h

/*
 * (C) Copyright 2001
 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405CR		1	/* This is a PPC405CR CPU	*/
#define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
#define CONFIG_CANBT		1	/* ...on a CANBT board		*/

#define	CONFIG_SYS_TEXT_BASE	0xFFFC0000

#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/

#define CONFIG_SYS_CLK_FREQ	25000000 /* external frequency to pll	*/

#define CONFIG_BAUDRATE		115200
#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds	*/

#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND						\
	"setenv bootargs root=/dev/ram rw console=ttyS0,115200; "	\
	"bootm ffe00000 ffe80000"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#undef	CONFIG_PCI_PNP			/* no pci plug-and-play		*/

#define CONFIG_PHY_ADDR		0	/* PHY address			*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_IRQ
#define CONFIG_CMD_EEPROM

#undef CONFIG_CMD_NET


#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_SDRAM_BANK0	1	/* init onboard SDRAM bank 0	*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_CONSOLE_INFO_QUIET	1	/* don't print console @ startup*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_serial_clock()

#define CONFIG_SYS_EXT_SERIAL_CLOCK	14745600 /* use external serial clock	*/

/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE	\
	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
	 57600, 115200, 230400, 460800, 921600 }

#define CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address */
#define CONFIG_SYS_EXTBDINFO	1		/* To use extended board_into (bd_t) */

#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */

#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_MONITOR_BASE
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define CONFIG_SYS_FLASH_WORD_SIZE	unsigned short	/* flash word size (width)	*/
#define CONFIG_SYS_FLASH_ADDR0		0x5555	/* 1st address for flash config cycles	*/
#define CONFIG_SYS_FLASH_ADDR1		0x2AAA	/* 2nd address for flash config cycles	*/
/*
 * The following defines are added for buggy IOP480 byte interface.
 * All other boards should use the standard values (CPCI405 etc.)
 */
#define CONFIG_SYS_FLASH_READ0		0x0000	/* 0 is standard			*/
#define CONFIG_SYS_FLASH_READ1		0x0001	/* 1 is standard			*/
#define CONFIG_SYS_FLASH_READ2		0x0002	/* 2 is standard			*/

#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */

#if 0 /* Use FLASH for environment variables */

#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_OFFSET		0x00010000	/* Offset of Environment Sector */
#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector	*/

#define CONFIG_ENV_SECT_SIZE	0x10000 /* see README - env sector total size	*/

#else /* Use EEPROM for environment variables */

#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
#define CONFIG_ENV_OFFSET		0x000	/* environment starts at the beginning of the EEPROM */
#define CONFIG_ENV_SIZE		0x400	/* 1024 bytes may be used for env vars */
				   /* total size of a CAT24WC08 is 1024 bytes */
#endif

/*-----------------------------------------------------------------------
 * I2C EEPROM (CAT24WC08) for environment
 */
#define CONFIG_HARD_I2C			/* I2C with hardware support */
#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE		0x7F

#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM CAT28WC08		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1	/* bytes of address		*/
/* mask of address bits that overflow into the "EEPROM chip address"	*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFFC00000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/

/*-----------------------------------------------------------------------
 * External Bus Controller (EBC) Setup
 */

/* Memory Bank 0 (Flash Bank 0) initialization					*/
#define CONFIG_SYS_EBC_PB0AP		0x92015480
#define CONFIG_SYS_EBC_PB0CR		0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */

/* Memory Bank 1 (CAN/USB) initialization					*/
#define CONFIG_SYS_EBC_PB1AP		0x010053C0  /* enable Ready, BEM=1		*/
#define CONFIG_SYS_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 2 (Misc-IO/LEDs) initialization					*/
#define CONFIG_SYS_EBC_PB2AP		0x000004c0  /* no Ready, BEM=1			*/
#define CONFIG_SYS_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit	*/

/* Memory Bank 3 (CAN Features) initialization					*/
#define CONFIG_SYS_EBC_PB3AP		0x80000040  /* no Ready, BEM=1			*/
#define CONFIG_SYS_EBC_PB3CR		0xF021C000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=32bit */

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in RAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	0x00ef0000 /* inside of SDRAM			*/
#define CONFIG_SYS_INIT_RAM_SIZE	0x0f00	/* Size of used area in RAM	       */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#endif	/* __CONFIG_H */
Commit	Line	Data
ab255f26 WD	1	/*
	2	* (C) Copyright 2001
	3	* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	/*
	32	* High Level Configuration Options
	33	* (easy to change)
	34	*/
	35
	36	#define CONFIG_405CR 1 /* This is a PPC405CR CPU */
c837dcb1 WD	37	#define CONFIG_4xx 1 /* ...member of PPC4xx family */
c837dcb1 WD	38	#define CONFIG_CANBT 1 /* ...on a CANBT board */
ab255f26	39
2ae18241 WD	40	#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
2ae18241 WD	41
c837dcb1	42	#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
ab255f26	43
c837dcb1	44	#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
ab255f26 WD	45
	46	#define CONFIG_BAUDRATE 115200
	47	#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */
	48
	49	#undef CONFIG_BOOTARGS
	50	#define CONFIG_BOOTCOMMAND \
	51	"setenv bootargs root=/dev/ram rw console=ttyS0,115200; " \
	52	"bootm ffe00000 ffe80000"
	53
	54	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	55	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
ab255f26	56
c837dcb1	57	#undef CONFIG_PCI_PNP /* no pci plug-and-play */
ab255f26	58
c837dcb1	59	#define CONFIG_PHY_ADDR 0 /* PHY address */
ab255f26	60
ab255f26	61
11799434 JL	62	/*
	63	* BOOTP options
	64	*/
	65	#define CONFIG_BOOTP_BOOTFILESIZE
	66	#define CONFIG_BOOTP_BOOTPATH
	67	#define CONFIG_BOOTP_GATEWAY
	68	#define CONFIG_BOOTP_HOSTNAME
	69
	70
49cf7e8e JL	71	/*
	72	* Command line configuration.
	73	*/
	74	#include <config_cmd_default.h>
	75
	76	#define CONFIG_CMD_IRQ
5728be38	77	#define CONFIG_CMD_EEPROM
49cf7e8e JL	78
	79	#undef CONFIG_CMD_NET
	80
ab255f26 WD	81
	82	#undef CONFIG_WATCHDOG /* watchdog disabled */
	83
c837dcb1	84	#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
ab255f26 WD	85
	86	/*
	87	* Miscellaneous configurable options
	88	*/
6d0f6bcf JCPV	89	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	90	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
49cf7e8e	91	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	92	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
ab255f26	93	#else
6d0f6bcf	94	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
ab255f26	95	#endif
6d0f6bcf JCPV	96	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	97	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	98	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
ab255f26	99
6d0f6bcf	100	#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
ab255f26	101
6d0f6bcf JCPV	102	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	103	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
ab255f26	104
550650dd SR	105	#define CONFIG_CONS_INDEX 1 /* Use UART0 */
	106	#define CONFIG_SYS_NS16550
	107	#define CONFIG_SYS_NS16550_SERIAL
	108	#define CONFIG_SYS_NS16550_REG_SIZE 1
	109	#define CONFIG_SYS_NS16550_CLK get_serial_clock()
	110
6d0f6bcf	111	#define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */
ab255f26 WD	112
ab255f26 WD	113	/* The following table includes the supported baudrates */
6d0f6bcf	114	#define CONFIG_SYS_BAUDRATE_TABLE \
8bde7f77 WD	115	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
8bde7f77 WD	116	57600, 115200, 230400, 460800, 921600 }
ab255f26	117
6d0f6bcf JCPV	118	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
6d0f6bcf JCPV	119	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
ab255f26	120
6d0f6bcf	121	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
ab255f26 WD	122
	123	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	124
	125	/*-----------------------------------------------------------------------
	126	* Start addresses for the final memory configuration
	127	* (Set up by the startup code)
6d0f6bcf	128	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
ab255f26	129	*/
6d0f6bcf	130	#define CONFIG_SYS_SDRAM_BASE 0x00000000
a00c137e	131	#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
14d0a02a WD	132	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
14d0a02a WD	133	#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
6d0f6bcf	134	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
ab255f26 WD	135
	136	/*
	137	* For booting Linux, the board info and command line data
	138	* have to be in the first 8 MB of memory, since this is
	139	* the maximum mapped by the Linux kernel during initialization.
	140	*/
6d0f6bcf	141	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
ab255f26 WD	142	/*-----------------------------------------------------------------------
	143	* FLASH organization
	144	*/
6d0f6bcf JCPV	145	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	146	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
ab255f26	147
6d0f6bcf JCPV	148	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	149	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
ab255f26	150
6d0f6bcf JCPV	151	#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
	152	#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
	153	#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
ab255f26 WD	154	/*
	155	* The following defines are added for buggy IOP480 byte interface.
	156	* All other boards should use the standard values (CPCI405 etc.)
	157	*/
6d0f6bcf JCPV	158	#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
	159	#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
	160	#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
ab255f26	161
6d0f6bcf	162	#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
ab255f26 WD	163
	164	#if 0 /* Use FLASH for environment variables */
	165
5a1aceb0	166	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	167	#define CONFIG_ENV_OFFSET 0x00010000 /* Offset of Environment Sector */
0e8d1586 JCPV	168	#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
ab255f26	169
0e8d1586	170	#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
ab255f26 WD	171
	172	#else /* Use EEPROM for environment variables */
	173
bb1f8b4f	174	#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
0e8d1586 JCPV	175	#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
0e8d1586 JCPV	176	#define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars */
8bde7f77	177	/* total size of a CAT24WC08 is 1024 bytes */
ab255f26 WD	178	#endif
	179
	180	/*-----------------------------------------------------------------------
	181	* I2C EEPROM (CAT24WC08) for environment
	182	*/
c837dcb1	183	#define CONFIG_HARD_I2C /* I2C with hardware support */
d0b0dcaa	184	#define CONFIG_PPC4XX_I2C /* use PPC4xx driver */
6d0f6bcf JCPV	185	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	186	#define CONFIG_SYS_I2C_SLAVE 0x7F
ab255f26	187
6d0f6bcf JCPV	188	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
6d0f6bcf JCPV	189	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
ab255f26	190	/* mask of address bits that overflow into the "EEPROM chip address" */
6d0f6bcf	191	#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
ab255f26	192
ab255f26 WD	193	/*
	194	* Init Memory Controller:
	195	*
	196	* BR0/1 and OR0/1 (FLASH)
	197	*/
	198
	199	#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
	200	#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
	201
	202	/*-----------------------------------------------------------------------
	203	* External Bus Controller (EBC) Setup
	204	*/
	205
c837dcb1	206	/* Memory Bank 0 (Flash Bank 0) initialization */
6d0f6bcf JCPV	207	#define CONFIG_SYS_EBC_PB0AP 0x92015480
6d0f6bcf JCPV	208	#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
ab255f26	209
c837dcb1	210	/* Memory Bank 1 (CAN/USB) initialization */
6d0f6bcf JCPV	211	#define CONFIG_SYS_EBC_PB1AP 0x010053C0 /* enable Ready, BEM=1 */
6d0f6bcf JCPV	212	#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
ab255f26	213
c837dcb1	214	/* Memory Bank 2 (Misc-IO/LEDs) initialization */
6d0f6bcf JCPV	215	#define CONFIG_SYS_EBC_PB2AP 0x000004c0 /* no Ready, BEM=1 */
6d0f6bcf JCPV	216	#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
ab255f26	217
c837dcb1	218	/* Memory Bank 3 (CAN Features) initialization */
6d0f6bcf JCPV	219	#define CONFIG_SYS_EBC_PB3AP 0x80000040 /* no Ready, BEM=1 */
6d0f6bcf JCPV	220	#define CONFIG_SYS_EBC_PB3CR 0xF021C000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=32bit */
ab255f26 WD	221
	222	/*-----------------------------------------------------------------------
	223	* Definitions for initial stack pointer and data area (in RAM)
	224	*/
6d0f6bcf	225	#define CONFIG_SYS_INIT_RAM_ADDR 0x00ef0000 /* inside of SDRAM */
553f0982	226	#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */
25ddd1fb	227	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
6d0f6bcf	228	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
ab255f26	229
ab255f26	230	#endif /* __CONFIG_H */