[people/ms/u-boot.git] / include / configs / CRAYL1.h

/*
 * (C) Copyright 2000-2004
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 * David Updegraff, Cray, Inc.  dave@cray.com: our 405 is walnut-lite..
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_CRAYL1
/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_405GP		1	/* This is a PPC405 CPU	*/
#define CONFIG_4xx		    1   /* ...member of PPC405 family */
#define CONFIG_SYS_CLK_FREQ 25000000
#define CONFIG_BAUDRATE		9600
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#define CONFIG_MII		    1	/* MII PHY management */
#define	CONFIG_PHY_ADDR		1	/* PHY address; handling of ENET */
#define CONFIG_BOARD_EARLY_INIT_F 1	/* early setup for 405gp */
#define CONFIG_MISC_INIT_R	1	/* so that a misc_init_r() is called */

/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
 * keep possible initrd ramdisk decompression out.  This is in k (1024 bytes)
 #define CONFIG_PRAM			16
 */
#define	CONFIG_LOADADDR		0x100000	/* where TFTP images go */
#undef CONFIG_BOOTARGS

/* Bootcmd is overridden by the bootscript in board/cray/L1
 */
#define	CONFIG_SYS_AUTOLOAD		"no"
#define CONFIG_BOOTCOMMAND	"dhcp"

/*
 * ..during experiments..
 #define CONFIG_SERVERIP         10.0.0.1
 #define CONFIG_ETHADDR          00:40:a6:80:14:5
 */
#define CONFIG_HARD_I2C         1		/* hardware support for i2c */
#define CONFIG_SDRAM_BANK0		1
#define CONFIG_SYS_I2C_SPEED		    400000	/* I2C speed and slave address	*/
#define CONFIG_SYS_I2C_SLAVE		    0x7F
#define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
#define CONFIG_IDENT_STRING     "Cray L1"
#define CONFIG_ENV_OVERWRITE     1
#define	CONFIG_SYS_HZ		             1000	/* decrementer freq: 1 ms ticks	*/
#define CONFIG_SYS_HUSH_PARSER			1
#define CONFIG_SYS_PROMPT_HUSH_PS2		"> "
#define CONFIG_AUTOSCRIPT		1


/*
 * Command line configuration.
 */

#define CONFIG_CMD_BDI
#define CONFIG_CMD_IMI
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_NET
#define CONFIG_CMD_ENV
#define CONFIG_CMD_CONSOLE
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DATE
#define CONFIG_CMD_RUN
#define CONFIG_CMD_I2C
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_SETGETDCR


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_VENDOREX
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_BOOTFILESIZE


/*
 * how many time to fail & restart a net-TFTP before giving up & resetting
 * the board hoping that a reset of net interface might help..
 */
#define CONFIG_NET_RESET 5

/*
 * bauds.  Just to make it compile; in our case, I read the base_baud
 * from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
 * drives the system clock.
 */
#define CONFIG_SYS_BASE_BAUD       403225
#define CONFIG_SYS_BAUDRATE_TABLE  \
    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_PROMPT	"=> "				/* Monitor Command Prompt	*/
#define	CONFIG_SYS_CBSIZE	256				/* Console I/O Buffer Size	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE			/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16				/* max number of command args	*/


#define CONFIG_SYS_LOAD_ADDR		0x100000	/* where to load what we get from TFTP */
#define CONFIG_SYS_TFTP_LOADADDR	CONFIG_SYS_LOAD_ADDR
#define CONFIG_SYS_EXTBDINFO		1		/* To use extended board_into (bd_t) */
#define CONFIG_SYS_DRAM_TEST		1

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFC00000
#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE


#define CONFIG_SYS_MONITOR_LEN		(192 * 1024)	/* Reserve 192 kB for Monitor	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	 1		/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	 64		/* max number of sectors on one chip	*/
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT 500	/* Timeout for Flash Write (in ms)	*/

/* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector  */
#define CONFIG_ENV_OFFSET		0x3c8000
#define CONFIG_ENV_IS_IN_FLASH	1	/* use FLASH for environment vars */
#define	CONFIG_ENV_SIZE		0x1000	 /* Total Size of Environment area	*/
#define CONFIG_ENV_SECT_SIZE	0x10000	 /* see README - env sector total size	*/

/* Memory tests: U-BOOT relocates itself to the top of Ram, so its at
 * 32meg-(128k+some_malloc_space+copy-of-ENV sector)..
 */
#define CONFIG_SYS_SDRAM_SIZE		32		/* megs of ram */
#define CONFIG_SYS_MEMTEST_START	0x2000  /* memtest works from the end of */
									/* the exception vector table */
									/* to the end of the DRAM  */
									/* less monitor and malloc area */
#define CONFIG_SYS_STACK_USAGE		0x10000 /* Reserve 64k for the stack usage */
#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* 128k for malloc space */
#define CONFIG_SYS_MEM_END_USAGE	( CONFIG_SYS_MONITOR_LEN \
				+ CONFIG_SYS_MALLOC_LEN \
				+ CONFIG_ENV_SECT_SIZE \
				+ CONFIG_SYS_STACK_USAGE )

#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 - CONFIG_SYS_MEM_END_USAGE)
/* END ENVIRONNEMENT FLASH */

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/


/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in OnChipMem )
 */
#if 1
/* On Chip Memory location */
#define CONFIG_SYS_TEMP_STACK_OCM	1
#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000

#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM		*/
#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM	*/
#define CONFIG_SYS_GBL_DATA_SIZE      256  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET    (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
#else
#define CONFIG_SYS_OCM_DATA_ADDR	0xF0000000
#define CONFIG_SYS_OCM_DATA_SIZE	0x1000
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR	/* inside of On Chip SRAM    */
#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE	/* End of On Chip SRAM	     */
#define CONFIG_SYS_GBL_DATA_SIZE	64	/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
#endif

/*-----------------------------------------------------------------------
 * Definitions for Serial Presence Detect EEPROM address
 */
#define EEPROM_WRITE_ADDRESS 0xA0
#define EEPROM_READ_ADDRESS  0xA1

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#endif	/* __CONFIG_H */
Commit	Line	Data
c609719b	1	/*
c837dcb1	2	* (C) Copyright 2000-2004
c609719b WD	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	* David Updegraff, Cray, Inc. dave@cray.com: our 405 is walnut-lite..
	5	*
	6	* See file CREDITS for list of people who contributed to this
	7	* project.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	#define CONFIG_CRAYL1
	32	/*
	33	* High Level Configuration Options
	34	* (easy to change)
	35	*/
	36
	37	#define CONFIG_405GP 1 /* This is a PPC405 CPU */
	38	#define CONFIG_4xx 1 /* ...member of PPC405 family */
	39	#define CONFIG_SYS_CLK_FREQ 25000000
	40	#define CONFIG_BAUDRATE 9600
	41	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	42	#define CONFIG_MII 1 /* MII PHY management */
	43	#define CONFIG_PHY_ADDR 1 /* PHY address; handling of ENET */
c837dcb1	44	#define CONFIG_BOARD_EARLY_INIT_F 1 /* early setup for 405gp */
c609719b WD	45	#define CONFIG_MISC_INIT_R 1 /* so that a misc_init_r() is called */
	46
	47	/* set PRAM to keep U-Boot out, mem= to keep linux out, and initrd_hi to
	48	* keep possible initrd ramdisk decompression out. This is in k (1024 bytes)
8bde7f77	49	#define CONFIG_PRAM 16
c609719b	50	*/
7f70e853	51	#define CONFIG_LOADADDR 0x100000 /* where TFTP images go */
c609719b WD	52	#undef CONFIG_BOOTARGS
c609719b WD	53
7f70e853 WD	54	/* Bootcmd is overridden by the bootscript in board/cray/L1
7f70e853 WD	55	*/
6d0f6bcf	56	#define CONFIG_SYS_AUTOLOAD "no"
7f70e853	57	#define CONFIG_BOOTCOMMAND "dhcp"
c609719b	58
8bde7f77	59	/*
c609719b WD	60	* ..during experiments..
c609719b WD	61	#define CONFIG_SERVERIP 10.0.0.1
8bde7f77	62	#define CONFIG_ETHADDR 00:40:a6:80:14:5
c609719b WD	63	*/
c609719b WD	64	#define CONFIG_HARD_I2C 1 /* hardware support for i2c */
7f70e853	65	#define CONFIG_SDRAM_BANK0 1
6d0f6bcf JCPV	66	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
	67	#define CONFIG_SYS_I2C_SLAVE 0x7F
	68	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
	69	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
c609719b WD	70	#define CONFIG_IDENT_STRING "Cray L1"
c609719b WD	71	#define CONFIG_ENV_OVERWRITE 1
6d0f6bcf JCPV	72	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
	73	#define CONFIG_SYS_HUSH_PARSER 1
	74	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
7f70e853	75	#define CONFIG_AUTOSCRIPT 1
c609719b WD	76
c609719b WD	77
49cf7e8e JL	78	/*
	79	* Command line configuration.
	80	*/
	81
	82	#define CONFIG_CMD_BDI
	83	#define CONFIG_CMD_IMI
	84	#define CONFIG_CMD_FLASH
	85	#define CONFIG_CMD_MEMORY
	86	#define CONFIG_CMD_NET
	87	#define CONFIG_CMD_ENV
	88	#define CONFIG_CMD_CONSOLE
	89	#define CONFIG_CMD_ASKENV
	90	#define CONFIG_CMD_ECHO
	91	#define CONFIG_CMD_IMMAP
	92	#define CONFIG_CMD_REGINFO
	93	#define CONFIG_CMD_DHCP
	94	#define CONFIG_CMD_DATE
	95	#define CONFIG_CMD_RUN
	96	#define CONFIG_CMD_I2C
	97	#define CONFIG_CMD_EEPROM
	98	#define CONFIG_CMD_DIAG
	99	#define CONFIG_CMD_AUTOSCRIPT
	100	#define CONFIG_CMD_SETGETDCR
	101
c609719b WD	102
c609719b WD	103	/*
5d2ebe1b	104	* BOOTP options
c609719b	105	*/
5d2ebe1b JL	106	#define CONFIG_BOOTP_SUBNETMASK
	107	#define CONFIG_BOOTP_GATEWAY
	108	#define CONFIG_BOOTP_HOSTNAME
	109	#define CONFIG_BOOTP_BOOTPATH
	110	#define CONFIG_BOOTP_VENDOREX
	111	#define CONFIG_BOOTP_DNS
	112	#define CONFIG_BOOTP_BOOTFILESIZE
	113
c609719b	114
8bde7f77	115	/*
7f70e853 WD	116	* how many time to fail & restart a net-TFTP before giving up & resetting
	117	* the board hoping that a reset of net interface might help..
	118	*/
	119	#define CONFIG_NET_RESET 5
	120
8bde7f77	121	/*
c609719b WD	122	* bauds. Just to make it compile; in our case, I read the base_baud
	123	* from the DCR anyway, so its kinda-tied to the above ref. clock which in turn
	124	* drives the system clock.
	125	*/
6d0f6bcf JCPV	126	#define CONFIG_SYS_BASE_BAUD 403225
6d0f6bcf JCPV	127	#define CONFIG_SYS_BAUDRATE_TABLE \
c609719b WD	128	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
c609719b WD	129
c609719b WD	130	/*
	131	* Miscellaneous configurable options
	132	*/
6d0f6bcf JCPV	133	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	134	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	135	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	136	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	137	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
c609719b WD	138
c609719b WD	139
6d0f6bcf JCPV	140	#define CONFIG_SYS_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */
	141	#define CONFIG_SYS_TFTP_LOADADDR CONFIG_SYS_LOAD_ADDR
	142	#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
	143	#define CONFIG_SYS_DRAM_TEST 1
c609719b WD	144
	145	/*-----------------------------------------------------------------------
	146	* Start addresses for the final memory configuration
	147	* (Set up by the startup code)
6d0f6bcf	148	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
c609719b	149	*/
6d0f6bcf JCPV	150	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	151	#define CONFIG_SYS_FLASH_BASE 0xFFC00000
	152	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
c609719b	153
c609719b	154
6d0f6bcf	155	#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
c609719b WD	156
	157	/*
	158	* For booting Linux, the board info and command line data
	159	* have to be in the first 8 MB of memory, since this is
	160	* the maximum mapped by the Linux kernel during initialization.
	161	*/
6d0f6bcf	162	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
c609719b WD	163	/*-----------------------------------------------------------------------
	164	* FLASH organization
	165	*/
6d0f6bcf JCPV	166	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	167	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
	168	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
	169	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
c609719b WD	170
c609719b WD	171	/* BEG ENVIRONNEMENT FLASH: needs to be a whole FlashSector */
0e8d1586	172	#define CONFIG_ENV_OFFSET 0x3c8000
5a1aceb0	173	#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
0e8d1586 JCPV	174	#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment area */
0e8d1586 JCPV	175	#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
c609719b	176
7f70e853	177	/* Memory tests: U-BOOT relocates itself to the top of Ram, so its at
c609719b WD	178	* 32meg-(128k+some_malloc_space+copy-of-ENV sector)..
c609719b WD	179	*/
6d0f6bcf JCPV	180	#define CONFIG_SYS_SDRAM_SIZE 32 /* megs of ram */
6d0f6bcf JCPV	181	#define CONFIG_SYS_MEMTEST_START 0x2000 /* memtest works from the end of */
c609719b WD	182	/* the exception vector table */
	183	/* to the end of the DRAM */
	184	/* less monitor and malloc area */
6d0f6bcf JCPV	185	#define CONFIG_SYS_STACK_USAGE 0x10000 /* Reserve 64k for the stack usage */
	186	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* 128k for malloc space */
	187	#define CONFIG_SYS_MEM_END_USAGE ( CONFIG_SYS_MONITOR_LEN \
	188	+ CONFIG_SYS_MALLOC_LEN \
0e8d1586	189	+ CONFIG_ENV_SECT_SIZE \
6d0f6bcf	190	+ CONFIG_SYS_STACK_USAGE )
c609719b	191
6d0f6bcf	192	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 - CONFIG_SYS_MEM_END_USAGE)
c609719b WD	193	/* END ENVIRONNEMENT FLASH */
c609719b WD	194
c609719b WD	195	/*
	196	* Init Memory Controller:
	197	*
	198	* BR0/1 and OR0/1 (FLASH)
	199	*/
	200
6d0f6bcf	201	#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
c609719b WD	202
	203
	204	/*-----------------------------------------------------------------------
	205	* Definitions for initial stack pointer and data area (in OnChipMem )
	206	*/
7f70e853 WD	207	#if 1
7f70e853 WD	208	/* On Chip Memory location */
6d0f6bcf JCPV	209	#define CONFIG_SYS_TEMP_STACK_OCM 1
	210	#define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000
	211	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
	212
	213	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */
	214	#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */
	215	#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
	216	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	217	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
7f70e853	218	#else
6d0f6bcf JCPV	219	#define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000
	220	#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
	221	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */
	222	#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of On Chip SRAM */
	223	#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	224	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	225	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
7f70e853	226	#endif
c609719b WD	227
	228	/*-----------------------------------------------------------------------
	229	* Definitions for Serial Presence Detect EEPROM address
	230	*/
	231	#define EEPROM_WRITE_ADDRESS 0xA0
	232	#define EEPROM_READ_ADDRESS 0xA1
	233
	234	/*
	235	* Internal Definitions
	236	*
	237	* Boot Flags
	238	*/
	239	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	240	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	241
	242	#endif /* __CONFIG_H */