[people/ms/u-boot.git] / include / configs / IAD210.h

/*
 * (C) Copyright 2001, 2002
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <mpc8xx_irq.h>


# ifdef DEBUG
#  warning DEBUG Defined
# endif /* DEBUG */

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_MPC860		1
#define CONFIG_IAD210		1	/* ...on a IAD210  module	*/
#define CONFIG_MPC860T		1
#define CONFIG_MPC862		1

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/

#undef  CONFIG_8xx_CONS_SMC1
#undef  CONFIG_8xx_CONS_SMC2
#define CONFIG_8xx_CONS_SCC2   /* V24 on SCC2 */
#undef  CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		9600


# define MPC8XX_FACT            16
# define CONFIG_8xx_GCLK_FREQ   (64000000L)  /* define if can't use get_gclk_freq */
# define CONFIG_CLOCKS_IN_MHZ	1            /* clocks passsed to Linux in MHz */

#if 0
# define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
# define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#endif

#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"

/* using this define saves us updating another source file */
#define CONFIG_BOARD_EARLY_INIT_F 1

#undef	CONFIG_BOOTARGS
/* #define CONFIG_BOOTCOMMAND							\
	"bootp;"								\
	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
	"bootm"
*/

#define CONFIG_BOOTCOMMAND	\
	"setenv bootargs root=/dev/nfs"	\
	"ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; "	\

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

/* #define	CONFIG_STATUS_LED	1*/	/* Status LED enabled		*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


# undef  CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
# define CONFIG_FEC_ENET    1	/* use FEC ethernet  */
# define CONFIG_MII         1
# define CONFIG_SYS_DISCOVER_PHY   1
# define CONFIG_FEC_UTOPIA  1
# define CONFIG_ETHADDR     08:00:06:26:A2:6D
# define CONFIG_IPADDR      192.168.28.128
# define CONFIG_SERVERIP    139.10.137.138
# define CONFIG_SYS_DISCOVER_PHY   1

#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

/* enable I2C and select the hardware/software driver */
#undef  CONFIG_HARD_I2C			/* I2C with hardware support    */
#define CONFIG_SOFT_I2C		1	/* I2C bit-banged               */
# define CONFIG_SYS_I2C_SPEED		50000
# define CONFIG_SYS_I2C_SLAVE		0xDD
# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
/*
 * Software (bit-bang) I2C driver configuration
 */
#define PB_SCL		0x00000020	/* PB 26 */
#define PB_SDA		0x00000010	/* PB 27 */

#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */

#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DATE


/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0x00100000

#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CONFIG_SYS_IMMR		0xFFF00000
#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define	CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0x08000000
#define CONFIG_SYS_FLASH_SIZE		((uint)(4 * 1024 * 1024))	/* max 16Mbyte */

#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100

#if defined(DEBUG)
# define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
#else
# define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
#endif

# define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
# define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/

#define	CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_OFFSET		0x8000
#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control					11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration					11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control					11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
 *-----------------------------------------------------------------------
 * set the PLL, the low-power modes and the reset control (15-29)
 */
#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11

#define CONFIG_SYS_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
			 SCCR_DFLCD000	|SCCR_DFALCD00	)

/*-----------------------------------------------------------------------
 * RCCR - RISC Controller Configuration Register		19-4
 *-----------------------------------------------------------------------
 */
/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
#define CONFIG_SYS_RCCR 0x0020

/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 */
#define PCMCIA_MEM_ADDR		((uint)0xff020000)
#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
#define CONFIG_SYS_DER		0

/* Because of the way the 860 starts up and assigns CS0 the
* entire address space, we have to set the memory controller
* differently.  Normally, you write the option register
* first, and then enable the chip select by writing the
* base register.  For CS0, you must write the base register
* first, followed by the option register.
*/

/*
 * Init Memory Controller:
 *
 * BR0 and OR0 (FLASH)
 */

#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CONFIG_SYS_REMAP_OR_AM		0xF8000000	/* OR addr mask */
#define CONFIG_SYS_PRELIM_OR_AM	0xF8000000	/* OR addr mask */

/* FLASH timing:
 TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1	*/
#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | \
				 OR_SCY_3_CLK | OR_EHTR)

#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )

/*
 * BR2/3 and OR2/3 (SDRAM)
 *
 */
#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/

#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM  | OR_BI | OR_ACS_DIV4)
#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)

/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CONFIG_SYS_MAMR_PTA	124		/* start with divider for 64 MHz	*/

/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
#define CONFIG_SYS_MPTPR	        MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

#ifdef CONFIG_MPC860T

/* Interrupt level assignments.
*/
#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */

#endif /* CONFIG_MPC860T */


#endif	/* __CONFIG_H */
Commit	Line	Data
0f8c9768 WD	1	/*
	2	* (C) Copyright 2001, 2002
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/*
	25	* board/config.h - configuration options, board specific
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
	30
	31	#include <mpc8xx_irq.h>
	32
	33
	34	# ifdef DEBUG
	35	# warning DEBUG Defined
	36	# endif /* DEBUG */
	37
	38	/*
	39	* High Level Configuration Options
	40	* (easy to change)
	41	*/
	42	#define CONFIG_MPC860 1
	43	#define CONFIG_IAD210 1 /* ...on a IAD210 module */
	44	#define CONFIG_MPC860T 1
	45	#define CONFIG_MPC862 1
	46
	47	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	48
	49	#undef CONFIG_8xx_CONS_SMC1
	50	#undef CONFIG_8xx_CONS_SMC2
	51	#define CONFIG_8xx_CONS_SCC2 /* V24 on SCC2 */
	52	#undef CONFIG_8xx_CONS_NONE
	53	#define CONFIG_BAUDRATE 9600
	54
	55
	56	# define MPC8XX_FACT 16
	57	# define CONFIG_8xx_GCLK_FREQ (64000000L) /* define if can't use get_gclk_freq */
	58	# define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	59
	60	#if 0
	61	# define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	62	#else
	63	# define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	64	#endif
65
32bf3d14	66	#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
0f8c9768 WD	67
0f8c9768 WD	68	/* using this define saves us updating another source file */
c837dcb1	69	#define CONFIG_BOARD_EARLY_INIT_F 1
0f8c9768 WD	70
	71	#undef CONFIG_BOOTARGS
	72	/* #define CONFIG_BOOTCOMMAND \
53677ef1 WD	73	"bootp;" \
	74	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
	75	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \
	76	"bootm"
0f8c9768 WD	77	*/
	78
	79	#define CONFIG_BOOTCOMMAND \
53677ef1 WD	80	"setenv bootargs root=/dev/nfs" \
53677ef1 WD	81	"ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \
0f8c9768 WD	82
	83	#undef CONFIG_WATCHDOG /* watchdog disabled */
	84
	85	/* #define CONFIG_STATUS_LED 1/ / Status LED enabled */
	86
7be044e4 JL	87	/*
	88	* BOOTP options
	89	*/
	90	#define CONFIG_BOOTP_SUBNETMASK
	91	#define CONFIG_BOOTP_GATEWAY
	92	#define CONFIG_BOOTP_HOSTNAME
	93	#define CONFIG_BOOTP_BOOTPATH
	94	#define CONFIG_BOOTP_BOOTFILESIZE
	95
0f8c9768 WD	96
	97	# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
	98	# define CONFIG_FEC_ENET 1 /* use FEC ethernet */
63ff004c	99	# define CONFIG_MII 1
6d0f6bcf	100	# define CONFIG_SYS_DISCOVER_PHY 1
0f8c9768 WD	101	# define CONFIG_FEC_UTOPIA 1
	102	# define CONFIG_ETHADDR 08:00:06:26:A2:6D
	103	# define CONFIG_IPADDR 192.168.28.128
	104	# define CONFIG_SERVERIP 139.10.137.138
6d0f6bcf	105	# define CONFIG_SYS_DISCOVER_PHY 1
0f8c9768 WD	106
	107	#define CONFIG_MAC_PARTITION
	108	#define CONFIG_DOS_PARTITION
	109
	110	/* enable I2C and select the hardware/software driver */
	111	#undef CONFIG_HARD_I2C /* I2C with hardware support */
	112	#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
6d0f6bcf JCPV	113	# define CONFIG_SYS_I2C_SPEED 50000
	114	# define CONFIG_SYS_I2C_SLAVE 0xDD
	115	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
0f8c9768 WD	116	/*
	117	* Software (bit-bang) I2C driver configuration
	118	*/
	119	#define PB_SCL 0x00000020 /* PB 26 */
	120	#define PB_SDA 0x00000010 /* PB 27 */
	121
	122	#define I2C_INIT (immr->im_cpm.cp_pbdir \|= PB_SCL)
	123	#define I2C_ACTIVE (immr->im_cpm.cp_pbdir \|= PB_SDA)
	124	#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
	125	#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
	126	#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SDA; \
	127	else immr->im_cpm.cp_pbdat &= ~PB_SDA
	128	#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat \|= PB_SCL; \
	129	else immr->im_cpm.cp_pbdat &= ~PB_SCL
	130	#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
	131
	132	#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
	133
0f8c9768	134
348f258f JL	135	/*
	136	* Command line configuration.
	137	*/
	138	#include <config_cmd_default.h>
	139
	140	#define CONFIG_CMD_ASKENV
	141	#define CONFIG_CMD_DHCP
	142	#define CONFIG_CMD_DATE
	143
0f8c9768 WD	144
	145	/*
	146	* Miscellaneous configurable options
	147	*/
6d0f6bcf JCPV	148	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	149	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
348f258f	150	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	151	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
0f8c9768	152	#else
6d0f6bcf	153	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
0f8c9768	154	#endif
6d0f6bcf JCPV	155	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	156	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	157	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
0f8c9768	158
6d0f6bcf JCPV	159	#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
6d0f6bcf JCPV	160	#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
0f8c9768	161
6d0f6bcf	162	#define CONFIG_SYS_LOAD_ADDR 0x00100000
0f8c9768	163
6d0f6bcf	164	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
0f8c9768	165
6d0f6bcf	166	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
0f8c9768 WD	167
	168	/*
	169	* Low Level Configuration Settings
	170	* (address mappings, register initial values, etc.)
	171	* You should know what you are doing if you make changes here.
	172	*/
	173	/*-----------------------------------------------------------------------
	174	* Internal Memory Mapped Register
	175	*/
6d0f6bcf JCPV	176	#define CONFIG_SYS_IMMR 0xFFF00000
6d0f6bcf JCPV	177	#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024))
0f8c9768 WD	178
	179	/*-----------------------------------------------------------------------
	180	* Definitions for initial stack pointer and data area (in DPRAM)
	181	*/
6d0f6bcf JCPV	182	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	183	#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	184	#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	185	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	186	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
0f8c9768 WD	187
	188	/*-----------------------------------------------------------------------
	189	* Start addresses for the final memory configuration
	190	* (Set up by the startup code)
6d0f6bcf	191	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
0f8c9768	192	*/
6d0f6bcf JCPV	193	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	194	#define CONFIG_SYS_FLASH_BASE 0x08000000
	195	#define CONFIG_SYS_FLASH_SIZE ((uint)(4 * 1024 * 1024)) /* max 16Mbyte */
0f8c9768	196
6d0f6bcf	197	#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
0f8c9768 WD	198
0f8c9768 WD	199	#if defined(DEBUG)
6d0f6bcf	200	# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
0f8c9768	201	#else
6d0f6bcf	202	# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
0f8c9768 WD	203	#endif
0f8c9768 WD	204
6d0f6bcf JCPV	205	# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
6d0f6bcf JCPV	206	# define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
0f8c9768 WD	207
	208	/*
	209	* For booting Linux, the board info and command line data
	210	* have to be in the first 8 MB of memory, since this is
	211	* the maximum mapped by the Linux kernel during initialization.
	212	*/
6d0f6bcf	213	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
0f8c9768 WD	214	/*-----------------------------------------------------------------------
	215	* FLASH organization
	216	*/
6d0f6bcf JCPV	217	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	218	#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
0f8c9768	219
6d0f6bcf JCPV	220	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	221	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
0f8c9768	222
5a1aceb0	223	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	224	#define CONFIG_ENV_OFFSET 0x8000
0e8d1586 JCPV	225	#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
0f8c9768 WD	226
	227	/*-----------------------------------------------------------------------
	228	* Cache Configuration
	229	*/
6d0f6bcf	230	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
348f258f	231	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	232	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
0f8c9768 WD	233	#endif
	234
	235	/*-----------------------------------------------------------------------
	236	* SYPCR - System Protection Control 11-9
	237	* SYPCR can only be written once after reset!
	238	*-----------------------------------------------------------------------
	239	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	240	*/
	241	#if defined(CONFIG_WATCHDOG)
6d0f6bcf	242	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
0f8c9768 WD	243	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
0f8c9768 WD	244	#else
6d0f6bcf	245	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
0f8c9768 WD	246	#endif
	247
	248	/*-----------------------------------------------------------------------
	249	* SIUMCR - SIU Module Configuration 11-6
	250	*-----------------------------------------------------------------------
	251	* PCMCIA config., multi-function pin tri-state
	252	*/
6d0f6bcf	253	#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC01)
0f8c9768 WD	254
	255	/*-----------------------------------------------------------------------
	256	* TBSCR - Time Base Status and Control 11-26
	257	*-----------------------------------------------------------------------
	258	* Clear Reference Interrupt Status, Timebase freezing enabled
	259	*/
6d0f6bcf	260	#define CONFIG_SYS_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
0f8c9768 WD	261
	262	/*-----------------------------------------------------------------------
	263	* PISCR - Periodic Interrupt Status and Control 11-31
	264	*-----------------------------------------------------------------------
	265	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	266	*/
6d0f6bcf	267	#define CONFIG_SYS_PISCR (PISCR_PS \| PISCR_PITF)
0f8c9768 WD	268
	269	/*-----------------------------------------------------------------------
	270	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	271	*-----------------------------------------------------------------------
	272	* set the PLL, the low-power modes and the reset control (15-29)
	273	*/
6d0f6bcf	274	#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) \| \
0f8c9768 WD	275	PLPRCR_SPLSS \| PLPRCR_TEXPS \| PLPRCR_TMIST)
	276
	277	/*-----------------------------------------------------------------------
	278	* SCCR - System Clock and reset Control Register 15-27
	279	*-----------------------------------------------------------------------
	280	* Set clock output, timebase and RTC source and divider,
	281	* power management and some other internal clocks
	282	*/
	283	#define SCCR_MASK SCCR_EBDF11
	284
6d0f6bcf	285	#define CONFIG_SYS_SCCR (SCCR_TBS \| SCCR_COM00 \| SCCR_DFSYNC00 \| \
0f8c9768 WD	286	SCCR_DFBRG00 \| SCCR_DFNL000 \| SCCR_DFNH000 \| \
	287	SCCR_DFLCD000 \|SCCR_DFALCD00 )
	288
	289	/*-----------------------------------------------------------------------
	290	* RCCR - RISC Controller Configuration Register 19-4
	291	*-----------------------------------------------------------------------
	292	*/
	293	/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
6d0f6bcf	294	#define CONFIG_SYS_RCCR 0x0020
0f8c9768 WD	295
	296	/*-----------------------------------------------------------------------
	297	* PCMCIA stuff
	298	*-----------------------------------------------------------------------
	299	*/
	300	#define PCMCIA_MEM_ADDR ((uint)0xff020000)
	301	#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
	302
	303	/*-----------------------------------------------------------------------
	304	*
	305	*-----------------------------------------------------------------------
	306	*
	307	*/
6d0f6bcf	308	#define CONFIG_SYS_DER 0
0f8c9768 WD	309
	310	/* Because of the way the 860 starts up and assigns CS0 the
	311	* entire address space, we have to set the memory controller
	312	* differently. Normally, you write the option register
	313	* first, and then enable the chip select by writing the
	314	* base register. For CS0, you must write the base register
	315	* first, followed by the option register.
	316	*/
	317
	318	/*
	319	* Init Memory Controller:
	320	*
	321	* BR0 and OR0 (FLASH)
	322	*/
	323
6d0f6bcf	324	#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */
0f8c9768 WD	325
	326	/* used to re-map FLASH both when starting from SRAM or FLASH:
	327	* restrict access enough to keep SRAM working (if any)
	328	* but not too much to meddle with FLASH accesses
	329	*/
6d0f6bcf JCPV	330	#define CONFIG_SYS_REMAP_OR_AM 0xF8000000 /* OR addr mask */
6d0f6bcf JCPV	331	#define CONFIG_SYS_PRELIM_OR_AM 0xF8000000 /* OR addr mask */
0f8c9768 WD	332
	333	/* FLASH timing:
	334	TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
6d0f6bcf	335	#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM \| OR_BI \| \
0f8c9768 WD	336	OR_SCY_3_CLK \| OR_EHTR)
0f8c9768 WD	337
6d0f6bcf JCPV	338	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
6d0f6bcf JCPV	339	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_V )
0f8c9768 WD	340
	341	/*
	342	* BR2/3 and OR2/3 (SDRAM)
	343	*
	344	*/
	345	#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank #0 */
	346	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
	347
	348	/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
	349
6d0f6bcf JCPV	350	#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| OR_CSNT_SAM \| OR_BI \| OR_ACS_DIV4)
	351	#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
	352	#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V)
0f8c9768 WD	353
	354	/*
	355	* Memory Periodic Timer Prescaler
	356	*/
	357
	358	/* periodic timer for refresh */
6d0f6bcf	359	#define CONFIG_SYS_MAMR_PTA 124 /* start with divider for 64 MHz */
0f8c9768 WD	360
0f8c9768 WD	361	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
6d0f6bcf	362	#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /* setting for 1 bank */
0f8c9768 WD	363
	364	/*
	365	* MAMR settings for SDRAM
	366	*/
	367
6d0f6bcf	368	#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
2535d602	369	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
0f8c9768 WD	370	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_8X)
	371
	372
	373	/*
	374	* Internal Definitions
	375	*
	376	* Boot Flags
	377	*/
	378	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	379	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	380
	381	#ifdef CONFIG_MPC860T
	382
	383	/* Interrupt level assignments.
	384	*/
	385	#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
	386
	387	#endif /* CONFIG_MPC860T */
	388
	389
	390	#endif /* __CONFIG_H */