]>
Commit | Line | Data |
---|---|---|
5fb17030 IY |
1 | /* |
2 | * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. | |
3 | * Copyright (C) 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com | |
4 | * | |
5 | * | |
6 | * See file CREDITS for list of people who contributed to this | |
7 | * project. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or | |
10 | * modify it under the terms of the GNU General Public License as | |
11 | * published by the Free Software Foundation; either version 2 of | |
12 | * the License, or (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
22 | * MA 02111-1307 USA | |
23 | */ | |
24 | ||
25 | #ifndef __CONFIG_H | |
26 | #define __CONFIG_H | |
27 | ||
28 | /* | |
29 | * High Level Configuration Options | |
30 | */ | |
31 | #define CONFIG_E300 1 /* E300 family */ | |
32 | #define CONFIG_MPC83xx 1 /* MPC83xx family */ | |
33 | #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ | |
34 | #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ | |
35 | ||
2ae18241 WD |
36 | #define CONFIG_SYS_TEXT_BASE 0xFE000000 |
37 | ||
5fb17030 IY |
38 | #define CONFIG_MISC_INIT_R |
39 | ||
40 | /* | |
41 | * On-board devices | |
42 | * | |
43 | * TSEC1 is SoC TSEC | |
44 | * TSEC2 is VSC switch | |
45 | */ | |
46 | #define CONFIG_TSEC1 | |
47 | #define CONFIG_VSC7385_ENET | |
48 | ||
49 | /* | |
50 | * System Clock Setup | |
51 | */ | |
52 | #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ | |
53 | #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN | |
54 | ||
55 | /* | |
56 | * Hardware Reset Configuration Word | |
57 | * if CLKIN is 66.66MHz, then | |
58 | * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz | |
59 | * We choose the A type silicon as default, so the core is 400Mhz. | |
60 | */ | |
61 | #define CONFIG_SYS_HRCW_LOW (\ | |
62 | HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ | |
63 | HRCWL_DDR_TO_SCB_CLK_2X1 |\ | |
64 | HRCWL_SVCOD_DIV_2 |\ | |
65 | HRCWL_CSB_TO_CLKIN_4X1 |\ | |
66 | HRCWL_CORE_TO_CSB_3X1) | |
67 | /* | |
68 | * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits | |
69 | * in 8308's HRCWH according to the manual, but original Freescale's | |
70 | * code has them and I've expirienced some problems using the board | |
71 | * with BDI3000 attached when I've tried to set these bits to zero | |
72 | * (UART doesn't work after the 'reset run' command). | |
73 | */ | |
74 | #define CONFIG_SYS_HRCW_HIGH (\ | |
75 | HRCWH_PCI_HOST |\ | |
76 | HRCWH_PCI1_ARBITER_ENABLE |\ | |
77 | HRCWH_CORE_ENABLE |\ | |
78 | HRCWH_FROM_0X00000100 |\ | |
79 | HRCWH_BOOTSEQ_DISABLE |\ | |
80 | HRCWH_SW_WATCHDOG_DISABLE |\ | |
81 | HRCWH_ROM_LOC_LOCAL_16BIT |\ | |
82 | HRCWH_RL_EXT_LEGACY |\ | |
83 | HRCWH_TSEC1M_IN_RGMII |\ | |
84 | HRCWH_TSEC2M_IN_RGMII |\ | |
85 | HRCWH_BIG_ENDIAN) | |
86 | ||
87 | /* | |
88 | * System IO Config | |
89 | */ | |
65ea7589 IY |
90 | #define CONFIG_SYS_SICRH (\ |
91 | SICRH_ESDHC_A_SD |\ | |
92 | SICRH_ESDHC_B_SD |\ | |
93 | SICRH_ESDHC_C_SD |\ | |
94 | SICRH_GPIO_A_TSEC2 |\ | |
95 | SICRH_GPIO_B_TSEC2_GTX_CLK125 |\ | |
96 | SICRH_IEEE1588_A_GPIO |\ | |
97 | SICRH_USB |\ | |
98 | SICRH_GTM_GPIO |\ | |
99 | SICRH_IEEE1588_B_GPIO |\ | |
100 | SICRH_ETSEC2_CRS |\ | |
101 | SICRH_GPIOSEL_1 |\ | |
102 | SICRH_TMROBI_V3P3 |\ | |
103 | SICRH_TSOBI1_V2P5 |\ | |
104 | SICRH_TSOBI2_V2P5) /* 0x01b7d103 */ | |
105 | #define CONFIG_SYS_SICRL (\ | |
106 | SICRL_SPI_PF0 |\ | |
107 | SICRL_UART_PF0 |\ | |
108 | SICRL_IRQ_PF0 |\ | |
109 | SICRL_I2C2_PF0 |\ | |
110 | SICRL_ETSEC1_GTX_CLK125) /* 0x00000040 */ | |
5fb17030 IY |
111 | |
112 | /* | |
113 | * IMMR new address | |
114 | */ | |
115 | #define CONFIG_SYS_IMMR 0xE0000000 | |
116 | ||
117 | /* | |
118 | * SERDES | |
119 | */ | |
120 | #define CONFIG_FSL_SERDES | |
121 | #define CONFIG_FSL_SERDES1 0xe3000 | |
122 | ||
123 | /* | |
124 | * Arbiter Setup | |
125 | */ | |
126 | #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ | |
127 | #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ | |
128 | #define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ | |
129 | ||
130 | /* | |
131 | * DDR Setup | |
132 | */ | |
133 | #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ | |
134 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
135 | #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
136 | #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 | |
137 | #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | |
138 | | DDRCDR_PZ_LOZ \ | |
139 | | DDRCDR_NZ_LOZ \ | |
140 | | DDRCDR_ODT \ | |
141 | | DDRCDR_Q_DRN) | |
142 | /* 0x7b880001 */ | |
143 | /* | |
144 | * Manually set up DDR parameters | |
145 | * consist of two chips HY5PS12621BFP-C4 from HYNIX | |
146 | */ | |
147 | ||
148 | #define CONFIG_SYS_DDR_SIZE 128 /* MB */ | |
149 | ||
150 | #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 | |
151 | #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ | |
152 | | 0x00010000 /* ODT_WR to CSn */ \ | |
153 | | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) | |
154 | /* 0x80010102 */ | |
155 | #define CONFIG_SYS_DDR_TIMING_3 0x00000000 | |
156 | #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ | |
157 | | (0 << TIMING_CFG0_WRT_SHIFT) \ | |
158 | | (0 << TIMING_CFG0_RRT_SHIFT) \ | |
159 | | (0 << TIMING_CFG0_WWT_SHIFT) \ | |
160 | | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ | |
161 | | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ | |
162 | | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ | |
163 | | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) | |
164 | /* 0x00220802 */ | |
165 | #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ | |
166 | | (7 << TIMING_CFG1_ACTTOPRE_SHIFT) \ | |
167 | | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ | |
168 | | (5 << TIMING_CFG1_CASLAT_SHIFT) \ | |
169 | | (6 << TIMING_CFG1_REFREC_SHIFT) \ | |
170 | | (2 << TIMING_CFG1_WRREC_SHIFT) \ | |
171 | | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ | |
172 | | (2 << TIMING_CFG1_WRTORD_SHIFT)) | |
173 | /* 0x27256222 */ | |
174 | #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ | |
175 | | (4 << TIMING_CFG2_CPO_SHIFT) \ | |
176 | | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ | |
177 | | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ | |
178 | | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ | |
179 | | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ | |
180 | | (5 << TIMING_CFG2_FOUR_ACT_SHIFT)) | |
181 | /* 0x121048c5 */ | |
182 | #define CONFIG_SYS_DDR_INTERVAL ((0x0360 << SDRAM_INTERVAL_REFINT_SHIFT) \ | |
183 | | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) | |
184 | /* 0x03600100 */ | |
185 | #define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ | |
186 | | SDRAM_CFG_SDRAM_TYPE_DDR2 \ | |
187 | | SDRAM_CFG_32_BE) | |
188 | /* 0x43080000 */ | |
189 | ||
190 | #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ | |
191 | #define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \ | |
192 | | (0x0232 << SDRAM_MODE_SD_SHIFT)) | |
193 | /* ODT 150ohm CL=3, AL=1 on SDRAM */ | |
194 | #define CONFIG_SYS_DDR_MODE2 0x00000000 | |
195 | ||
196 | /* | |
197 | * Memory test | |
198 | */ | |
199 | #define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */ | |
200 | #define CONFIG_SYS_MEMTEST_END 0x07f00000 | |
201 | ||
202 | /* | |
203 | * The reserved memory | |
204 | */ | |
14d0a02a | 205 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
5fb17030 IY |
206 | |
207 | #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ | |
208 | #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ | |
209 | ||
210 | /* | |
211 | * Initial RAM Base Address Setup | |
212 | */ | |
213 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
214 | #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ | |
553f0982 | 215 | #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ |
5fb17030 IY |
216 | #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ |
217 | #define CONFIG_SYS_GBL_DATA_OFFSET \ | |
553f0982 | 218 | (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) |
5fb17030 IY |
219 | |
220 | /* | |
221 | * Local Bus Configuration & Clock Setup | |
222 | */ | |
223 | #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP | |
224 | #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 | |
225 | #define CONFIG_SYS_LBC_LBCR 0x00040000 | |
226 | ||
227 | /* | |
228 | * FLASH on the Local Bus | |
229 | */ | |
230 | #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ | |
231 | #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ | |
232 | #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT | |
233 | ||
234 | #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ | |
235 | #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ | |
236 | #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ | |
237 | ||
238 | /* Window base at flash base */ | |
239 | #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE | |
65ea7589 | 240 | #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) |
5fb17030 IY |
241 | |
242 | #define CONFIG_SYS_BR0_PRELIM (\ | |
243 | CONFIG_SYS_FLASH_BASE /* Flash Base address */ |\ | |
244 | (2 << BR_PS_SHIFT) /* 16 bit port size */ |\ | |
245 | BR_V) /* valid */ | |
246 | #define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ | |
247 | | OR_UPM_XAM \ | |
248 | | OR_GPCM_CSNT \ | |
249 | | OR_GPCM_ACS_DIV2 \ | |
250 | | OR_GPCM_XACS \ | |
251 | | OR_GPCM_SCY_15 \ | |
252 | | OR_GPCM_TRLX \ | |
253 | | OR_GPCM_EHTR \ | |
254 | | OR_GPCM_EAD) | |
255 | ||
256 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
257 | /* 127 64KB sectors and 8 8KB top sectors per device */ | |
258 | #define CONFIG_SYS_MAX_FLASH_SECT 135 | |
259 | ||
260 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
261 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
262 | ||
263 | /* | |
264 | * NAND Flash on the Local Bus | |
265 | */ | |
266 | #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ | |
267 | #define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \ | |
268 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | |
269 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
270 | | BR_MS_FCM /* MSEL = FCM */ \ | |
271 | | BR_V ) /* valid */ | |
272 | #define CONFIG_SYS_OR1_PRELIM ( 0xFFFF8000 /* length 32K */ \ | |
273 | | OR_FCM_CSCT \ | |
274 | | OR_FCM_CST \ | |
275 | | OR_FCM_CHT \ | |
276 | | OR_FCM_SCY_1 \ | |
277 | | OR_FCM_TRLX \ | |
278 | | OR_FCM_EHTR ) | |
279 | /* 0xFFFF8396 */ | |
280 | ||
281 | #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE | |
65ea7589 | 282 | #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) |
5fb17030 IY |
283 | |
284 | #ifdef CONFIG_VSC7385_ENET | |
285 | #define CONFIG_TSEC2 | |
286 | #define CONFIG_SYS_VSC7385_BASE 0xF0000000 | |
287 | #define CONFIG_SYS_BR2_PRELIM 0xf0000801 /* VSC7385 Base address */ | |
288 | #define CONFIG_SYS_OR2_PRELIM 0xfffe09ff /* VSC7385, 128K bytes*/ | |
289 | /* Access window base at VSC7385 base */ | |
290 | #define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE | |
291 | /* Access window size 128K */ | |
65ea7589 | 292 | #define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) |
5fb17030 IY |
293 | /* The flash address and size of the VSC7385 firmware image */ |
294 | #define CONFIG_VSC7385_IMAGE 0xFE7FE000 | |
295 | #define CONFIG_VSC7385_IMAGE_SIZE 8192 | |
296 | #endif | |
297 | /* | |
298 | * Serial Port | |
299 | */ | |
300 | #define CONFIG_CONS_INDEX 1 | |
5fb17030 IY |
301 | #define CONFIG_SYS_NS16550 |
302 | #define CONFIG_SYS_NS16550_SERIAL | |
303 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
304 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
305 | ||
306 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
307 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
308 | ||
309 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) | |
310 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) | |
311 | ||
312 | /* Use the HUSH parser */ | |
313 | #define CONFIG_SYS_HUSH_PARSER | |
314 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
315 | ||
316 | /* Pass open firmware flat tree */ | |
317 | #define CONFIG_OF_LIBFDT 1 | |
318 | #define CONFIG_OF_BOARD_SETUP 1 | |
319 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
320 | ||
321 | /* I2C */ | |
322 | #define CONFIG_HARD_I2C /* I2C with hardware support */ | |
323 | #define CONFIG_FSL_I2C | |
324 | #define CONFIG_I2C_MULTI_BUS | |
325 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ | |
326 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
327 | #define CONFIG_SYS_I2C_NOPROBES {{0x51}} /* Don't probe these addrs */ | |
328 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
329 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
330 | ||
331 | ||
332 | /* | |
333 | * Board info - revision and where boot from | |
334 | */ | |
335 | #define CONFIG_SYS_I2C_PCF8574A_ADDR 0x39 | |
336 | ||
337 | /* | |
338 | * Config on-board RTC | |
339 | */ | |
340 | #define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */ | |
341 | #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ | |
342 | ||
343 | /* | |
344 | * General PCI | |
345 | * Addresses are mapped 1-1. | |
346 | */ | |
347 | #define CONFIG_SYS_PCIE1_BASE 0xA0000000 | |
348 | #define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 | |
349 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 | |
350 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 | |
351 | #define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 | |
352 | #define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 | |
353 | #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 | |
354 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 | |
355 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 | |
356 | ||
65ea7589 IY |
357 | /* enable PCIE clock */ |
358 | #define CONFIG_SYS_SCCR_PCIEXP1CM 1 | |
5fb17030 IY |
359 | |
360 | #define CONFIG_PCI | |
361 | #define CONFIG_PCIE | |
362 | ||
363 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
364 | ||
365 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ | |
366 | #define CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES 1 | |
367 | ||
368 | /* | |
369 | * TSEC | |
370 | */ | |
371 | #define CONFIG_NET_MULTI | |
372 | #define CONFIG_TSEC_ENET /* TSEC ethernet support */ | |
373 | #define CONFIG_SYS_TSEC1_OFFSET 0x24000 | |
374 | #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) | |
375 | #define CONFIG_SYS_TSEC2_OFFSET 0x25000 | |
376 | #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) | |
377 | ||
378 | /* | |
379 | * TSEC ethernet configuration | |
380 | */ | |
381 | #define CONFIG_MII 1 /* MII PHY management */ | |
382 | #define CONFIG_TSEC1_NAME "eTSEC0" | |
383 | #define CONFIG_TSEC2_NAME "eTSEC1" | |
384 | #define TSEC1_PHY_ADDR 2 | |
385 | #define TSEC2_PHY_ADDR 1 | |
386 | #define TSEC1_PHYIDX 0 | |
387 | #define TSEC2_PHYIDX 0 | |
388 | #define TSEC1_FLAGS TSEC_GIGABIT | |
389 | #define TSEC2_FLAGS TSEC_GIGABIT | |
390 | ||
391 | /* Options are: eTSEC[0-1] */ | |
392 | #define CONFIG_ETHPRIME "eTSEC0" | |
393 | ||
394 | /* | |
395 | * Environment | |
396 | */ | |
397 | #define CONFIG_ENV_IS_IN_FLASH 1 | |
398 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ | |
399 | CONFIG_SYS_MONITOR_LEN) | |
400 | #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ | |
401 | #define CONFIG_ENV_SIZE 0x2000 | |
402 | #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) | |
403 | #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE | |
404 | ||
405 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
406 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
407 | ||
408 | /* | |
409 | * BOOTP options | |
410 | */ | |
411 | #define CONFIG_BOOTP_BOOTFILESIZE | |
412 | #define CONFIG_BOOTP_BOOTPATH | |
413 | #define CONFIG_BOOTP_GATEWAY | |
414 | #define CONFIG_BOOTP_HOSTNAME | |
415 | ||
416 | /* | |
417 | * Command line configuration. | |
418 | */ | |
419 | #include <config_cmd_default.h> | |
420 | ||
421 | #define CONFIG_CMD_DATE | |
422 | #define CONFIG_CMD_DHCP | |
423 | #define CONFIG_CMD_I2C | |
424 | #define CONFIG_CMD_MII | |
425 | #define CONFIG_CMD_NET | |
426 | #define CONFIG_CMD_PCI | |
427 | #define CONFIG_CMD_PING | |
428 | ||
429 | #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ | |
430 | ||
431 | /* | |
432 | * Miscellaneous configurable options | |
433 | */ | |
434 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
435 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
436 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
437 | ||
438 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
439 | ||
440 | /* Print Buffer Size */ | |
441 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
442 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
443 | /* Boot Argument Buffer Size */ | |
444 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
445 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
446 | ||
447 | /* | |
448 | * For booting Linux, the board info and command line data | |
9f530d59 | 449 | * have to be in the first 256 MB of memory, since this is |
5fb17030 IY |
450 | * the maximum mapped by the Linux kernel during initialization. |
451 | */ | |
9f530d59 | 452 | #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ |
5fb17030 IY |
453 | |
454 | /* | |
455 | * Core HID Setup | |
456 | */ | |
457 | #define CONFIG_SYS_HID0_INIT 0x000000000 | |
458 | #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ | |
459 | HID0_ENABLE_INSTRUCTION_CACHE | \ | |
460 | HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) | |
461 | #define CONFIG_SYS_HID2 HID2_HBE | |
462 | ||
463 | /* | |
464 | * MMU Setup | |
465 | */ | |
466 | ||
467 | /* DDR: cache cacheable */ | |
468 | #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \ | |
469 | BATL_MEMCOHERENCE) | |
470 | #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ | |
471 | BATU_VS | BATU_VP) | |
472 | #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L | |
473 | #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U | |
474 | ||
475 | /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ | |
476 | #define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ | |
477 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) | |
478 | #define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ | |
479 | BATU_VP) | |
480 | #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L | |
481 | #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U | |
482 | ||
483 | /* FLASH: icache cacheable, but dcache-inhibit and guarded */ | |
484 | #define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ | |
485 | BATL_MEMCOHERENCE) | |
486 | #define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ | |
487 | BATU_VS | BATU_VP) | |
488 | #define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ | |
489 | BATL_CACHEINHIBIT | \ | |
490 | BATL_GUARDEDSTORAGE) | |
491 | #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U | |
492 | ||
493 | /* Stack in dcache: cacheable, no memory coherence */ | |
494 | #define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) | |
495 | #define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ | |
496 | BATU_VS | BATU_VP) | |
497 | #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L | |
498 | #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U | |
499 | ||
5fb17030 IY |
500 | /* |
501 | * Environment Configuration | |
502 | */ | |
503 | ||
504 | #define CONFIG_ENV_OVERWRITE | |
505 | ||
506 | #if defined(CONFIG_TSEC_ENET) | |
507 | #define CONFIG_HAS_ETH0 | |
508 | #define CONFIG_HAS_ETH1 | |
509 | #endif | |
510 | ||
511 | #define CONFIG_BAUDRATE 115200 | |
512 | ||
513 | #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ | |
514 | ||
515 | #define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ | |
516 | ||
517 | #define xstr(s) str(s) | |
518 | #define str(s) #s | |
519 | ||
520 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
521 | "netdev=eth0\0" \ | |
522 | "consoledev=ttyS0\0" \ | |
523 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
524 | "nfsroot=${serverip}:${rootpath}\0" \ | |
525 | "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
526 | "addip=setenv bootargs ${bootargs} " \ | |
527 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
528 | ":${hostname}:${netdev}:off panic=1\0" \ | |
529 | "addtty=setenv bootargs ${bootargs}" \ | |
530 | " console=${consoledev},${baudrate}\0" \ | |
531 | "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ | |
532 | "addmisc=setenv bootargs ${bootargs}\0" \ | |
533 | "kernel_addr=FE080000\0" \ | |
534 | "fdt_addr=FE280000\0" \ | |
535 | "ramdisk_addr=FE290000\0" \ | |
536 | "u-boot=mpc8308rdb/u-boot.bin\0" \ | |
537 | "kernel_addr_r=1000000\0" \ | |
538 | "fdt_addr_r=C00000\0" \ | |
539 | "hostname=mpc8308rdb\0" \ | |
540 | "bootfile=mpc8308rdb/uImage\0" \ | |
541 | "fdtfile=mpc8308rdb/mpc8308rdb.dtb\0" \ | |
542 | "rootpath=/opt/eldk-4.2/ppc_6xx\0" \ | |
543 | "flash_self=run ramargs addip addtty addmtd addmisc;" \ | |
544 | "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ | |
545 | "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ | |
546 | "bootm ${kernel_addr} - ${fdt_addr}\0" \ | |
547 | "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ | |
548 | "tftp ${fdt_addr_r} ${fdtfile};" \ | |
549 | "run nfsargs addip addtty addmtd addmisc;" \ | |
550 | "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ | |
551 | "bootcmd=run flash_self\0" \ | |
552 | "load=tftp ${loadaddr} ${u-boot}\0" \ | |
553 | "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ | |
554 | " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ | |
555 | " +${filesize};cp.b ${fileaddr} " \ | |
556 | xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ | |
557 | "upd=run load update\0" \ | |
558 | ||
559 | #endif /* __CONFIG_H */ |