]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/MPC8540ADS.h
rename CFG_ macros to CONFIG_SYS
[people/ms/u-boot.git] / include / configs / MPC8540ADS.h
CommitLineData
42d1f039 1/*
0ac6f8b7 2 * Copyright 2004 Freescale Semiconductor.
42d1f039
WD
3 * (C) Copyright 2002,2003 Motorola,Inc.
4 * Xianghua Xiao <X.Xiao@motorola.com>
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
0ac6f8b7
WD
25/*
26 * mpc8540ads board configuration file
27 *
28 * Please refer to doc/README.mpc85xx for more info.
29 *
30 * Make sure you change the MAC address and other network params first,
31 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file.
42d1f039
WD
32 */
33
34#ifndef __CONFIG_H
35#define __CONFIG_H
36
37/* High Level Configuration Options */
0ac6f8b7
WD
38#define CONFIG_BOOKE 1 /* BOOKE */
39#define CONFIG_E500 1 /* BOOKE e500 family */
40#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
41#define CONFIG_MPC8540 1 /* MPC8540 specific */
42#define CONFIG_MPC8540ADS 1 /* MPC8540ADS board specific */
43
288693ab
JL
44#ifndef CONFIG_HAS_FEC
45#define CONFIG_HAS_FEC 1 /* 8540 has FEC */
46#endif
47
0ac6f8b7 48#define CONFIG_PCI
53677ef1 49#define CONFIG_TSEC_ENET /* tsec ethernet support */
42d1f039 50#define CONFIG_ENV_OVERWRITE
7232a272 51#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
42d1f039 52
0ac6f8b7
WD
53/*
54 * sysclk for MPC85xx
55 *
56 * Two valid values are:
57 * 33000000
58 * 66000000
59 *
60 * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz
9aea9530
WD
61 * is likely the desired value here, so that is now the default.
62 * The board, however, can run at 66MHz. In any event, this value
63 * must match the settings of some switches. Details can be found
64 * in the README.mpc85xxads.
34c3c0e0
MM
65 *
66 * XXX -- Can't we run at 66 MHz, anyway? PCI should drop to
67 * 33MHz to accommodate, based on a PCI pin.
68 * Note that PCI-X won't work at 33MHz.
0ac6f8b7
WD
69 */
70
9aea9530 71#ifndef CONFIG_SYS_CLK_FREQ
34c3c0e0 72#define CONFIG_SYS_CLK_FREQ 33000000
42d1f039
WD
73#endif
74
9aea9530 75
0ac6f8b7
WD
76/*
77 * These can be toggled for performance analysis, otherwise use default.
78 */
79#define CONFIG_L2_CACHE /* toggle L2 cache */
80#define CONFIG_BTB /* toggle branch predition */
81#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
42d1f039 82
6d0f6bcf
JCPV
83#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
84#define CONFIG_SYS_MEMTEST_END 0x00400000
42d1f039 85
42d1f039
WD
86
87/*
88 * Base addresses -- Note these are effective addresses where the
89 * actual resources get mapped (not physical addresses)
90 */
6d0f6bcf
JCPV
91#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
92#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
93#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */
94#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
42d1f039 95
9617c8d4
KG
96/* DDR Setup */
97#define CONFIG_FSL_DDR1
98#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
99#define CONFIG_DDR_SPD
100#undef CONFIG_FSL_DDR_INTERACTIVE
101
102#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
9aea9530 103
6d0f6bcf
JCPV
104#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
105#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
9aea9530 106
9617c8d4
KG
107#define CONFIG_NUM_DDR_CONTROLLERS 1
108#define CONFIG_DIMM_SLOTS_PER_CTLR 1
109#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
110
111/* I2C addresses of SPD EEPROMs */
112#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
113
114/* These are used when DDR doesn't use SPD. */
6d0f6bcf
JCPV
115#define CONFIG_SYS_SDRAM_SIZE 128 /* DDR is 128MB */
116#define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 /* 0-128MB */
117#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000002
118#define CONFIG_SYS_DDR_TIMING_1 0x37344321
119#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */
120#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
121#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */
122#define CONFIG_SYS_DDR_INTERVAL 0x05200100 /* autocharge,no open page */
42d1f039 123
0ac6f8b7
WD
124/*
125 * SDRAM on the Local Bus
126 */
6d0f6bcf
JCPV
127#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
128#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
42d1f039 129
6d0f6bcf
JCPV
130#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */
131#define CONFIG_SYS_BR0_PRELIM 0xff001801 /* port size 32bit */
42d1f039 132
6d0f6bcf
JCPV
133#define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Flash */
134#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
135#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */
136#undef CONFIG_SYS_FLASH_CHECKSUM
137#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
138#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
0ac6f8b7 139
6d0f6bcf 140#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
42d1f039 141
6d0f6bcf
JCPV
142#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
143#define CONFIG_SYS_RAMBOOT
42d1f039 144#else
6d0f6bcf 145#undef CONFIG_SYS_RAMBOOT
42d1f039
WD
146#endif
147
00b1883a 148#define CONFIG_FLASH_CFI_DRIVER
6d0f6bcf
JCPV
149#define CONFIG_SYS_FLASH_CFI
150#define CONFIG_SYS_FLASH_EMPTY_INFO
42d1f039 151
0ac6f8b7
WD
152#undef CONFIG_CLOCKS_IN_MHZ
153
42d1f039 154
0ac6f8b7
WD
155/*
156 * Local Bus Definitions
157 */
158
159/*
160 * Base Register 2 and Option Register 2 configure SDRAM.
6d0f6bcf 161 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
0ac6f8b7
WD
162 *
163 * For BR2, need:
164 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
165 * port-size = 32-bits = BR2[19:20] = 11
166 * no parity checking = BR2[21:22] = 00
167 * SDRAM for MSEL = BR2[24:26] = 011
168 * Valid = BR[31] = 1
169 *
170 * 0 4 8 12 16 20 24 28
171 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
172 *
6d0f6bcf 173 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
0ac6f8b7
WD
174 * FIXME: the top 17 bits of BR2.
175 */
176
6d0f6bcf 177#define CONFIG_SYS_BR2_PRELIM 0xf0001861
0ac6f8b7
WD
178
179/*
6d0f6bcf 180 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
0ac6f8b7
WD
181 *
182 * For OR2, need:
183 * 64MB mask for AM, OR2[0:7] = 1111 1100
184 * XAM, OR2[17:18] = 11
185 * 9 columns OR2[19-21] = 010
186 * 13 rows OR2[23-25] = 100
187 * EAD set for extra time OR[31] = 1
188 *
189 * 0 4 8 12 16 20 24 28
190 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
191 */
192
6d0f6bcf 193#define CONFIG_SYS_OR2_PRELIM 0xfc006901
0ac6f8b7 194
6d0f6bcf
JCPV
195#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
196#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
197#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
198#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/
0ac6f8b7
WD
199
200/*
201 * LSDMR masks
202 */
6d0f6bcf
JCPV
203#define CONFIG_SYS_LBC_LSDMR_RFEN (1 << (31 - 1))
204#define CONFIG_SYS_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
205#define CONFIG_SYS_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
206#define CONFIG_SYS_LBC_LSDMR_RFCR5 (3 << (31 - 16))
207#define CONFIG_SYS_LBC_LSDMR_RFCR16 (7 << (31 - 16))
208#define CONFIG_SYS_LBC_LSDMR_PRETOACT3 (3 << (31 - 19))
209#define CONFIG_SYS_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
210#define CONFIG_SYS_LBC_LSDMR_ACTTORW3 (3 << (31 - 22))
211#define CONFIG_SYS_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
212#define CONFIG_SYS_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
213#define CONFIG_SYS_LBC_LSDMR_BL8 (1 << (31 - 23))
214#define CONFIG_SYS_LBC_LSDMR_WRC2 (2 << (31 - 27))
215#define CONFIG_SYS_LBC_LSDMR_WRC4 (0 << (31 - 27))
216#define CONFIG_SYS_LBC_LSDMR_BUFCMD (1 << (31 - 29))
217#define CONFIG_SYS_LBC_LSDMR_CL3 (3 << (31 - 31))
218
219#define CONFIG_SYS_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
220#define CONFIG_SYS_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
221#define CONFIG_SYS_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
222#define CONFIG_SYS_LBC_LSDMR_OP_MRW (3 << (31 - 4))
223#define CONFIG_SYS_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
224#define CONFIG_SYS_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
225#define CONFIG_SYS_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
226#define CONFIG_SYS_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
227
228#define CONFIG_SYS_LBC_LSDMR_COMMON ( CONFIG_SYS_LBC_LSDMR_BSMA1516 \
229 | CONFIG_SYS_LBC_LSDMR_RFCR5 \
230 | CONFIG_SYS_LBC_LSDMR_PRETOACT3 \
231 | CONFIG_SYS_LBC_LSDMR_ACTTORW3 \
232 | CONFIG_SYS_LBC_LSDMR_BL8 \
233 | CONFIG_SYS_LBC_LSDMR_WRC2 \
234 | CONFIG_SYS_LBC_LSDMR_CL3 \
235 | CONFIG_SYS_LBC_LSDMR_RFEN \
0ac6f8b7
WD
236 )
237
238/*
239 * SDRAM Controller configuration sequence.
240 */
6d0f6bcf
JCPV
241#define CONFIG_SYS_LBC_LSDMR_1 ( CONFIG_SYS_LBC_LSDMR_COMMON \
242 | CONFIG_SYS_LBC_LSDMR_OP_PCHALL)
243#define CONFIG_SYS_LBC_LSDMR_2 ( CONFIG_SYS_LBC_LSDMR_COMMON \
244 | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
245#define CONFIG_SYS_LBC_LSDMR_3 ( CONFIG_SYS_LBC_LSDMR_COMMON \
246 | CONFIG_SYS_LBC_LSDMR_OP_ARFRSH)
247#define CONFIG_SYS_LBC_LSDMR_4 ( CONFIG_SYS_LBC_LSDMR_COMMON \
248 | CONFIG_SYS_LBC_LSDMR_OP_MRW)
249#define CONFIG_SYS_LBC_LSDMR_5 ( CONFIG_SYS_LBC_LSDMR_COMMON \
250 | CONFIG_SYS_LBC_LSDMR_OP_NORMAL)
0ac6f8b7 251
42d1f039 252
9aea9530
WD
253/*
254 * 32KB, 8-bit wide for ADS config reg
255 */
6d0f6bcf
JCPV
256#define CONFIG_SYS_BR4_PRELIM 0xf8000801
257#define CONFIG_SYS_OR4_PRELIM 0xffffe1f1
258#define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000)
42d1f039
WD
259
260#define CONFIG_L1_INIT_RAM
6d0f6bcf
JCPV
261#define CONFIG_SYS_INIT_RAM_LOCK 1
262#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
263#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */
42d1f039 264
6d0f6bcf
JCPV
265#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
266#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
267#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
42d1f039 268
6d0f6bcf
JCPV
269#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
270#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
42d1f039
WD
271
272/* Serial Port */
273#define CONFIG_CONS_INDEX 1
274#undef CONFIG_SERIAL_SOFTWARE_FIFO
6d0f6bcf
JCPV
275#define CONFIG_SYS_NS16550
276#define CONFIG_SYS_NS16550_SERIAL
277#define CONFIG_SYS_NS16550_REG_SIZE 1
278#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
42d1f039 279
6d0f6bcf 280#define CONFIG_SYS_BAUDRATE_TABLE \
42d1f039
WD
281 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
282
6d0f6bcf
JCPV
283#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
284#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
42d1f039
WD
285
286/* Use the HUSH parser */
6d0f6bcf
JCPV
287#define CONFIG_SYS_HUSH_PARSER
288#ifdef CONFIG_SYS_HUSH_PARSER
289#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
42d1f039
WD
290#endif
291
0e16387d 292/* pass open firmware flat tree */
0fd5ec66
KG
293#define CONFIG_OF_LIBFDT 1
294#define CONFIG_OF_BOARD_SETUP 1
295#define CONFIG_OF_STDOUT_VIA_ALIAS 1
0e16387d 296
6d0f6bcf
JCPV
297#define CONFIG_SYS_64BIT_VSPRINTF 1
298#define CONFIG_SYS_64BIT_STRTOUL 1
0e16387d 299
20476726
JL
300/*
301 * I2C
302 */
303#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
304#define CONFIG_HARD_I2C /* I2C with hardware support*/
0ac6f8b7 305#undef CONFIG_SOFT_I2C /* I2C bit-banged */
6d0f6bcf
JCPV
306#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
307#define CONFIG_SYS_I2C_SLAVE 0x7F
308#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */
309#define CONFIG_SYS_I2C_OFFSET 0x3000
0ac6f8b7
WD
310
311/* RapidIO MMU */
6d0f6bcf
JCPV
312#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */
313#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE
314#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */
0ac6f8b7
WD
315
316/*
317 * General PCI
362dd830 318 * Memory space is mapped 1-1, but I/O space must start from 0.
0ac6f8b7 319 */
6d0f6bcf
JCPV
320#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
321#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
322#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
323#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
324#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
325#define CONFIG_SYS_PCI1_IO_SIZE 0x100000 /* 1M */
42d1f039 326
42d1f039 327#if defined(CONFIG_PCI)
0ac6f8b7 328
42d1f039 329#define CONFIG_NET_MULTI
53677ef1 330#define CONFIG_PCI_PNP /* do pci plug-and-play */
0ac6f8b7 331
42d1f039 332#undef CONFIG_EEPRO100
0ac6f8b7
WD
333#undef CONFIG_TULIP
334
335#if !defined(CONFIG_PCI_PNP)
336 #define PCI_ENET0_IOADDR 0xe0000000
337 #define PCI_ENET0_MEMADDR 0xe0000000
53677ef1 338 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
42d1f039 339#endif
0ac6f8b7
WD
340
341#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
6d0f6bcf 342#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
0ac6f8b7
WD
343
344#endif /* CONFIG_PCI */
345
346
347#if defined(CONFIG_TSEC_ENET)
348
349#ifndef CONFIG_NET_MULTI
53677ef1 350#define CONFIG_NET_MULTI 1
42d1f039
WD
351#endif
352
0ac6f8b7 353#define CONFIG_MII 1 /* MII PHY management */
255a3577
KP
354#define CONFIG_TSEC1 1
355#define CONFIG_TSEC1_NAME "TSEC0"
356#define CONFIG_TSEC2 1
357#define CONFIG_TSEC2_NAME "TSEC1"
0ac6f8b7
WD
358#define TSEC1_PHY_ADDR 0
359#define TSEC2_PHY_ADDR 1
0ac6f8b7
WD
360#define TSEC1_PHYIDX 0
361#define TSEC2_PHYIDX 0
3a79013e
AF
362#define TSEC1_FLAGS TSEC_GIGABIT
363#define TSEC2_FLAGS TSEC_GIGABIT
9aea9530 364
288693ab
JL
365
366#if CONFIG_HAS_FEC
9aea9530 367#define CONFIG_MPC85XX_FEC 1
d9b94f28 368#define CONFIG_MPC85XX_FEC_NAME "FEC"
9aea9530 369#define FEC_PHY_ADDR 3
0ac6f8b7 370#define FEC_PHYIDX 0
3a79013e 371#define FEC_FLAGS 0
288693ab 372#endif
9aea9530 373
d9b94f28
JL
374/* Options are: TSEC[0-1], FEC */
375#define CONFIG_ETHPRIME "TSEC0"
0ac6f8b7
WD
376
377#endif /* CONFIG_TSEC_ENET */
378
379
380/*
381 * Environment
382 */
6d0f6bcf 383#ifndef CONFIG_SYS_RAMBOOT
5a1aceb0 384 #define CONFIG_ENV_IS_IN_FLASH 1
6d0f6bcf 385 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
0e8d1586
JCPV
386 #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
387 #define CONFIG_ENV_SIZE 0x2000
42d1f039 388#else
6d0f6bcf 389 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */
93f6d725 390 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
6d0f6bcf 391 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
0e8d1586 392 #define CONFIG_ENV_SIZE 0x2000
42d1f039
WD
393#endif
394
0ac6f8b7 395#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf 396#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
42d1f039 397
2835e518 398
659e2f67
JL
399/*
400 * BOOTP options
401 */
402#define CONFIG_BOOTP_BOOTFILESIZE
403#define CONFIG_BOOTP_BOOTPATH
404#define CONFIG_BOOTP_GATEWAY
405#define CONFIG_BOOTP_HOSTNAME
406
407
2835e518
JL
408/*
409 * Command line configuration.
410 */
411#include <config_cmd_default.h>
412
413#define CONFIG_CMD_PING
414#define CONFIG_CMD_I2C
82ac8c97 415#define CONFIG_CMD_ELF
2835e518
JL
416
417#if defined(CONFIG_PCI)
418 #define CONFIG_CMD_PCI
419#endif
420
6d0f6bcf 421#if defined(CONFIG_SYS_RAMBOOT)
2835e518
JL
422 #undef CONFIG_CMD_ENV
423 #undef CONFIG_CMD_LOADS
42d1f039 424#endif
0ac6f8b7 425
42d1f039 426
0ac6f8b7 427#undef CONFIG_WATCHDOG /* watchdog disabled */
42d1f039
WD
428
429/*
430 * Miscellaneous configurable options
431 */
6d0f6bcf 432#define CONFIG_SYS_LONGHELP /* undef to save memory */
22abb2d2 433#define CONFIG_CMDLINE_EDITING /* Command-line editing */
6d0f6bcf
JCPV
434#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
435#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
0ac6f8b7 436
2835e518 437#if defined(CONFIG_CMD_KGDB)
6d0f6bcf 438 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
42d1f039 439#else
6d0f6bcf 440 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
42d1f039 441#endif
0ac6f8b7 442
6d0f6bcf
JCPV
443#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
444#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
445#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
446#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
42d1f039
WD
447
448/*
449 * For booting Linux, the board info and command line data
450 * have to be in the first 8 MB of memory, since this is
451 * the maximum mapped by the Linux kernel during initialization.
452 */
6d0f6bcf 453#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
42d1f039 454
42d1f039
WD
455/*
456 * Internal Definitions
457 *
458 * Boot Flags
459 */
460#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
0ac6f8b7 461#define BOOTFLAG_WARM 0x02 /* Software reboot */
42d1f039 462
2835e518 463#if defined(CONFIG_CMD_KGDB)
42d1f039
WD
464#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
465#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
466#endif
467
9aea9530
WD
468
469/*
470 * Environment Configuration
471 */
0ac6f8b7
WD
472
473/* The mac addresses for all ethernet interface */
42d1f039 474#if defined(CONFIG_TSEC_ENET)
10327dc5 475#define CONFIG_HAS_ETH0
0ac6f8b7 476#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
e2ffd59b 477#define CONFIG_HAS_ETH1
0ac6f8b7 478#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
e2ffd59b 479#define CONFIG_HAS_ETH2
0ac6f8b7 480#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
42d1f039
WD
481#endif
482
0ac6f8b7
WD
483#define CONFIG_IPADDR 192.168.1.253
484
485#define CONFIG_HOSTNAME unknown
486#define CONFIG_ROOTPATH /nfsroot
487#define CONFIG_BOOTFILE your.uImage
488
489#define CONFIG_SERVERIP 192.168.1.1
490#define CONFIG_GATEWAYIP 192.168.1.1
491#define CONFIG_NETMASK 255.255.255.0
492
493#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
494
495#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
496#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
497
498#define CONFIG_BAUDRATE 115200
499
9aea9530 500#define CONFIG_EXTRA_ENV_SETTINGS \
0ac6f8b7
WD
501 "netdev=eth0\0" \
502 "consoledev=ttyS0\0" \
d3ec0d94 503 "ramdiskaddr=1000000\0" \
8272dc2f
AF
504 "ramdiskfile=your.ramdisk.u-boot\0" \
505 "fdtaddr=400000\0" \
506 "fdtfile=your.fdt.dtb\0"
0ac6f8b7 507
9aea9530 508#define CONFIG_NFSBOOTCOMMAND \
0ac6f8b7
WD
509 "setenv bootargs root=/dev/nfs rw " \
510 "nfsroot=$serverip:$rootpath " \
511 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
512 "console=$consoledev,$baudrate $othbootargs;" \
513 "tftp $loadaddr $bootfile;" \
8272dc2f
AF
514 "tftp $fdtaddr $fdtfile;" \
515 "bootm $loadaddr - $fdtaddr"
0ac6f8b7
WD
516
517#define CONFIG_RAMBOOTCOMMAND \
518 "setenv bootargs root=/dev/ram rw " \
519 "console=$consoledev,$baudrate $othbootargs;" \
520 "tftp $ramdiskaddr $ramdiskfile;" \
521 "tftp $loadaddr $bootfile;" \
8272dc2f 522 "tftp $fdtaddr $fdtfile;" \
d3ec0d94 523 "bootm $loadaddr $ramdiskaddr $fdtaddr"
0ac6f8b7
WD
524
525#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
42d1f039
WD
526
527#endif /* __CONFIG_H */