]>
Commit | Line | Data |
---|---|---|
0cde4b00 JL |
1 | /* |
2 | * Copyright 2007 Freescale Semiconductor, Inc. | |
3 | * | |
4 | * See file CREDITS for list of people who contributed to this | |
5 | * project. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation; either version 2 of | |
10 | * the License, or (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | * GNU General Public License for more details. | |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
20 | * MA 02111-1307 USA | |
21 | */ | |
22 | ||
23 | /* | |
24 | * mpc8544ds board configuration file | |
25 | * | |
26 | */ | |
27 | #ifndef __CONFIG_H | |
28 | #define __CONFIG_H | |
29 | ||
30 | /* High Level Configuration Options */ | |
31 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
32 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
33 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ | |
34 | #define CONFIG_MPC8544 1 | |
35 | #define CONFIG_MPC8544DS 1 | |
36 | ||
837f1ba0 ES |
37 | #define CONFIG_PCI 1 /* Enable PCI/PCIE */ |
38 | #define CONFIG_PCI1 1 /* PCI controller 1 */ | |
39 | #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ | |
40 | #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ | |
41 | #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ | |
42 | #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ | |
8ff3de61 | 43 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ |
837f1ba0 | 44 | |
4bcae9c9 KG |
45 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ |
46 | ||
837f1ba0 | 47 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ |
0cde4b00 JL |
48 | #define CONFIG_ENV_OVERWRITE |
49 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ | |
50 | #undef CONFIG_DDR_DLL | |
51 | #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ | |
52 | ||
53 | #define CONFIG_DDR_ECC /* only for ECC DDR module */ | |
54 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ | |
55 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
56 | ||
57 | #define CONFIG_DDR_ECC_CMD | |
837f1ba0 | 58 | #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ |
0cde4b00 JL |
59 | |
60 | /* | |
61 | * When initializing flash, if we cannot find the manufacturer ID, | |
62 | * assume this is the AMD flash associated with the CDS board. | |
63 | * This allows booting from a promjet. | |
64 | */ | |
65 | #define CONFIG_ASSUME_AMD_FLASH | |
66 | ||
67 | #define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ | |
68 | ||
69 | #ifndef __ASSEMBLY__ | |
70 | extern unsigned long get_board_sys_clk(unsigned long dummy); | |
71 | #endif | |
72 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ | |
73 | ||
74 | /* | |
75 | * These can be toggled for performance analysis, otherwise use default. | |
76 | */ | |
837f1ba0 | 77 | #define CONFIG_L2_CACHE /* toggle L2 cache */ |
0cde4b00 JL |
78 | #define CONFIG_BTB /* toggle branch predition */ |
79 | #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ | |
0cde4b00 JL |
80 | |
81 | /* | |
82 | * Only possible on E500 Version 2 or newer cores. | |
83 | */ | |
84 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
85 | ||
0cde4b00 JL |
86 | #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ |
87 | #define CFG_MEMTEST_END 0x00400000 | |
837f1ba0 | 88 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ |
0cde4b00 JL |
89 | |
90 | /* | |
91 | * Base addresses -- Note these are effective addresses where the | |
92 | * actual resources get mapped (not physical addresses) | |
93 | */ | |
837f1ba0 | 94 | #define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ |
0cde4b00 | 95 | #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ |
f69766e4 | 96 | #define CFG_CCSRBAR_PHYS CFG_CCSRBAR /* physical addr of CCSRBAR */ |
0cde4b00 JL |
97 | #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ |
98 | ||
99 | #define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) | |
100 | #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) | |
101 | #define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000) | |
102 | #define CFG_PCIE3_ADDR (CFG_CCSRBAR+0xb000) | |
103 | ||
104 | /* | |
105 | * DDR Setup | |
106 | */ | |
107 | #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ | |
108 | #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE | |
109 | ||
110 | #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ | |
111 | ||
112 | /* | |
113 | * Make sure required options are set | |
114 | */ | |
115 | #ifndef CONFIG_SPD_EEPROM | |
116 | #error ("CONFIG_SPD_EEPROM is required") | |
117 | #endif | |
118 | ||
119 | #undef CONFIG_CLOCKS_IN_MHZ | |
120 | ||
121 | /* | |
122 | * Memory map | |
123 | * | |
124 | * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable | |
125 | * | |
126 | * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable | |
127 | * | |
128 | * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable | |
129 | * | |
130 | * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable | |
131 | * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable | |
132 | * | |
133 | * Localbus cacheable | |
134 | * | |
135 | * 0xf000_0000 0xf3ff_ffff SDRAM 64M Cacheable | |
136 | * 0xf401_0000 0xf401_3fff L1 for stack 4K Cacheable TLB0 | |
137 | * | |
138 | * Localbus non-cacheable | |
139 | * | |
140 | * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M non-cacheable | |
141 | * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable | |
142 | * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable | |
143 | * | |
144 | */ | |
145 | ||
146 | /* | |
147 | * Local Bus Definitions | |
148 | */ | |
149 | #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ | |
150 | ||
0cde4b00 JL |
151 | #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ |
152 | ||
153 | #define CFG_BR0_PRELIM 0xff801001 | |
154 | #define CFG_BR1_PRELIM 0xfe801001 | |
155 | ||
156 | #define CFG_OR0_PRELIM 0xff806e65 | |
157 | #define CFG_OR1_PRELIM 0xff806e65 | |
158 | ||
45245618 | 159 | #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} |
0cde4b00 | 160 | |
292188e1 | 161 | #define CFG_FLASH_QUIET_TEST |
45245618 | 162 | #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ |
0cde4b00 JL |
163 | #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ |
164 | #undef CFG_FLASH_CHECKSUM | |
165 | #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
166 | #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
81e56e9a | 167 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ |
0cde4b00 JL |
168 | |
169 | #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ | |
170 | ||
171 | #define CFG_FLASH_CFI_DRIVER | |
172 | #define CFG_FLASH_CFI | |
173 | #define CFG_FLASH_EMPTY_INFO | |
174 | ||
175 | #define CFG_LBC_NONCACHE_BASE 0xf8000000 | |
176 | ||
177 | #define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */ | |
178 | #define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ | |
179 | ||
180 | #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ | |
181 | #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ | |
182 | ||
7608d75f | 183 | #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ |
0cde4b00 JL |
184 | #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ |
185 | #define PIXIS_ID 0x0 /* Board ID at offset 0 */ | |
186 | #define PIXIS_VER 0x1 /* Board version at offset 1 */ | |
187 | #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ | |
188 | #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ | |
189 | #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch | |
190 | * register */ | |
191 | #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ | |
192 | #define PIXIS_VCTL 0x10 /* VELA Control Register */ | |
193 | #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ | |
194 | #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ | |
195 | #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ | |
196 | #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ | |
197 | #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ | |
198 | #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ | |
199 | #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ | |
db74b3c1 | 200 | #define CFG_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ |
0cde4b00 JL |
201 | |
202 | ||
203 | /* define to use L1 as initial stack */ | |
1107014e AF |
204 | #define CONFIG_L1_INIT_RAM |
205 | #define CFG_INIT_RAM_LOCK 1 | |
206 | #define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ | |
207 | #define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */ | |
208 | ||
0cde4b00 JL |
209 | |
210 | #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ | |
211 | #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) | |
212 | #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET | |
213 | ||
214 | #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ | |
630d9bfc | 215 | #define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ |
0cde4b00 JL |
216 | |
217 | /* Serial Port - controlled on board with jumper J8 | |
218 | * open - index 2 | |
219 | * shorted - index 1 | |
220 | */ | |
221 | #define CONFIG_CONS_INDEX 1 | |
222 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
223 | #define CFG_NS16550 | |
224 | #define CFG_NS16550_SERIAL | |
225 | #define CFG_NS16550_REG_SIZE 1 | |
226 | #define CFG_NS16550_CLK get_bus_freq(0) | |
227 | ||
228 | #define CFG_BAUDRATE_TABLE \ | |
229 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} | |
230 | ||
231 | #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) | |
232 | #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) | |
233 | ||
234 | /* Use the HUSH parser */ | |
235 | #define CFG_HUSH_PARSER | |
236 | #ifdef CFG_HUSH_PARSER | |
237 | #define CFG_PROMPT_HUSH_PS2 "> " | |
238 | #endif | |
239 | ||
240 | /* pass open firmware flat tree */ | |
addce57e KG |
241 | #define CONFIG_OF_LIBFDT 1 |
242 | #define CONFIG_OF_BOARD_SETUP 1 | |
243 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
0cde4b00 JL |
244 | |
245 | /* I2C */ | |
246 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
247 | #define CONFIG_HARD_I2C /* I2C with hardware support */ | |
248 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
249 | #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ | |
250 | #define CFG_I2C_EEPROM_ADDR 0x57 | |
251 | #define CFG_I2C_SLAVE 0x7F | |
252 | #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ | |
253 | #define CFG_I2C_OFFSET 0x3100 | |
254 | ||
255 | /* | |
256 | * General PCI | |
257 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
258 | */ | |
259 | #define CFG_PCIE_PHYS 0x80000000 /* 1G PCIE TLB */ | |
260 | #define CFG_PCI_PHYS 0xc0000000 /* 512M PCI TLB */ | |
261 | ||
262 | #define CFG_PCI1_MEM_BASE 0xc0000000 | |
263 | #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE | |
264 | #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ | |
265 | #define CFG_PCI1_IO_BASE 0x00000000 | |
266 | #define CFG_PCI1_IO_PHYS 0xe1000000 | |
d64ee908 | 267 | #define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ |
0cde4b00 JL |
268 | |
269 | /* PCI view of System Memory */ | |
270 | #define CFG_PCI_MEMORY_BUS 0x00000000 | |
271 | #define CFG_PCI_MEMORY_PHYS 0x00000000 | |
272 | #define CFG_PCI_MEMORY_SIZE 0x80000000 | |
273 | ||
274 | /* controller 2, Slot 1, tgtid 1, Base address 9000 */ | |
275 | #define CFG_PCIE2_MEM_BASE 0x80000000 | |
276 | #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE | |
277 | #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
278 | #define CFG_PCIE2_IO_BASE 0x00000000 | |
d64ee908 KG |
279 | #define CFG_PCIE2_IO_PHYS 0xe1010000 |
280 | #define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
0cde4b00 JL |
281 | |
282 | /* controller 1, Slot 2,tgtid 2, Base address a000 */ | |
283 | #define CFG_PCIE1_MEM_BASE 0xa0000000 | |
284 | #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE | |
d64ee908 KG |
285 | #define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ |
286 | #define CFG_PCIE1_IO_BASE 0x00000000 | |
287 | #define CFG_PCIE1_IO_PHYS 0xe1020000 | |
288 | #define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
0cde4b00 JL |
289 | |
290 | /* controller 3, direct to uli, tgtid 3, Base address b000 */ | |
291 | #define CFG_PCIE3_MEM_BASE 0xb0000000 | |
292 | #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE | |
d64ee908 | 293 | #define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ |
0cde4b00 | 294 | #define CFG_PCIE3_IO_BASE 0x00000000 |
d64ee908 | 295 | #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ |
0cde4b00 | 296 | #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ |
56a92705 KG |
297 | #define CFG_PCIE3_MEM_BASE2 0xb0200000 |
298 | #define CFG_PCIE3_MEM_PHYS2 CFG_PCIE3_MEM_BASE2 | |
299 | #define CFG_PCIE3_MEM_SIZE2 0x00200000 /* 1M */ | |
0cde4b00 JL |
300 | |
301 | #if defined(CONFIG_PCI) | |
302 | ||
630d9bfc KG |
303 | /*PCIE video card used*/ |
304 | #define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS | |
305 | ||
306 | /*PCI video card used*/ | |
307 | /*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ | |
308 | ||
309 | /* video */ | |
310 | #define CONFIG_VIDEO | |
311 | ||
312 | #if defined(CONFIG_VIDEO) | |
313 | #define CONFIG_BIOSEMU | |
314 | #define CONFIG_CFB_CONSOLE | |
315 | #define CONFIG_VIDEO_SW_CURSOR | |
316 | #define CONFIG_VGA_AS_SINGLE_DEVICE | |
317 | #define CONFIG_ATI_RADEON_FB | |
318 | #define CONFIG_VIDEO_LOGO | |
319 | /*#define CONFIG_CONSOLE_CURSOR*/ | |
320 | #define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET | |
321 | #endif | |
322 | ||
0cde4b00 JL |
323 | #define CONFIG_NET_MULTI |
324 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
325 | ||
326 | #undef CONFIG_EEPRO100 | |
327 | #undef CONFIG_TULIP | |
328 | #define CONFIG_RTL8139 | |
329 | ||
330 | #ifdef CONFIG_RTL8139 | |
331 | /* This macro is used by RTL8139 but not defined in PPC architecture */ | |
332 | #define KSEG1ADDR(x) (x) | |
333 | #define _IO_BASE 0x00000000 | |
334 | #endif | |
335 | ||
336 | #ifndef CONFIG_PCI_PNP | |
337 | #define PCI_ENET0_IOADDR CFG_PCI1_IO_BASE | |
338 | #define PCI_ENET0_MEMADDR CFG_PCI1_IO_BASE | |
339 | #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ | |
340 | #endif | |
341 | ||
342 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
343 | #define CONFIG_DOS_PARTITION | |
344 | #define CONFIG_SCSI_AHCI | |
345 | ||
346 | #ifdef CONFIG_SCSI_AHCI | |
347 | #define CONFIG_SATA_ULI5288 | |
348 | #define CFG_SCSI_MAX_SCSI_ID 4 | |
349 | #define CFG_SCSI_MAX_LUN 1 | |
837f1ba0 | 350 | #define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) |
0cde4b00 JL |
351 | #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE |
352 | #endif /* SCSCI */ | |
353 | ||
354 | #endif /* CONFIG_PCI */ | |
355 | ||
356 | ||
357 | #if defined(CONFIG_TSEC_ENET) | |
358 | ||
359 | #ifndef CONFIG_NET_MULTI | |
837f1ba0 | 360 | #define CONFIG_NET_MULTI 1 |
0cde4b00 JL |
361 | #endif |
362 | ||
363 | #define CONFIG_MII 1 /* MII PHY management */ | |
364 | #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ | |
255a3577 KP |
365 | #define CONFIG_TSEC1 1 |
366 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
367 | #define CONFIG_TSEC3 1 | |
368 | #define CONFIG_TSEC3_NAME "eTSEC3" | |
837f1ba0 | 369 | |
0cde4b00 JL |
370 | #define TSEC1_PHY_ADDR 0 |
371 | #define TSEC3_PHY_ADDR 1 | |
372 | ||
3a79013e AF |
373 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) |
374 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
375 | ||
0cde4b00 JL |
376 | #define TSEC1_PHYIDX 0 |
377 | #define TSEC3_PHYIDX 0 | |
378 | ||
379 | #define CONFIG_ETHPRIME "eTSEC1" | |
380 | ||
381 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
0cde4b00 JL |
382 | #endif /* CONFIG_TSEC_ENET */ |
383 | ||
384 | /* | |
385 | * Environment | |
386 | */ | |
387 | #define CFG_ENV_IS_IN_FLASH 1 | |
388 | #if CFG_MONITOR_BASE > 0xfff80000 | |
389 | #define CFG_ENV_ADDR 0xfff80000 | |
390 | #else | |
630d9bfc | 391 | #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000) |
0cde4b00 JL |
392 | #endif |
393 | #define CFG_ENV_SIZE 0x2000 | |
394 | #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ | |
395 | ||
396 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
397 | #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
398 | ||
659e2f67 JL |
399 | /* |
400 | * BOOTP options | |
401 | */ | |
402 | #define CONFIG_BOOTP_BOOTFILESIZE | |
403 | #define CONFIG_BOOTP_BOOTPATH | |
404 | #define CONFIG_BOOTP_GATEWAY | |
405 | #define CONFIG_BOOTP_HOSTNAME | |
406 | ||
407 | ||
2835e518 JL |
408 | /* |
409 | * Command line configuration. | |
410 | */ | |
411 | #include <config_cmd_default.h> | |
412 | ||
413 | #define CONFIG_CMD_PING | |
414 | #define CONFIG_CMD_I2C | |
415 | #define CONFIG_CMD_MII | |
82ac8c97 | 416 | #define CONFIG_CMD_ELF |
2835e518 | 417 | |
0cde4b00 | 418 | #if defined(CONFIG_PCI) |
2835e518 JL |
419 | #define CONFIG_CMD_PCI |
420 | #define CONFIG_CMD_BEDBUG | |
421 | #define CONFIG_CMD_NET | |
837f1ba0 ES |
422 | #define CONFIG_CMD_SCSI |
423 | #define CONFIG_CMD_EXT2 | |
0cde4b00 | 424 | #endif |
2835e518 | 425 | |
0cde4b00 JL |
426 | |
427 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
428 | ||
429 | /* | |
430 | * Miscellaneous configurable options | |
431 | */ | |
432 | #define CFG_LONGHELP /* undef to save memory */ | |
50c03c8c | 433 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
0cde4b00 JL |
434 | #define CFG_LOAD_ADDR 0x2000000 /* default load address */ |
435 | #define CFG_PROMPT "=> " /* Monitor Command Prompt */ | |
2835e518 | 436 | #if defined(CONFIG_CMD_KGDB) |
0cde4b00 JL |
437 | #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
438 | #else | |
439 | #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
440 | #endif | |
441 | #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
442 | #define CFG_MAXARGS 16 /* max number of command args */ | |
443 | #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
444 | #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ | |
445 | ||
446 | /* | |
447 | * For booting Linux, the board info and command line data | |
448 | * have to be in the first 8 MB of memory, since this is | |
449 | * the maximum mapped by the Linux kernel during initialization. | |
450 | */ | |
837f1ba0 | 451 | #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
0cde4b00 | 452 | |
0cde4b00 JL |
453 | /* |
454 | * Internal Definitions | |
455 | * | |
456 | * Boot Flags | |
457 | */ | |
458 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
459 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
460 | ||
2835e518 | 461 | #if defined(CONFIG_CMD_KGDB) |
0cde4b00 JL |
462 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
463 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
464 | #endif | |
465 | ||
466 | /* | |
467 | * Environment Configuration | |
468 | */ | |
469 | ||
470 | /* The mac addresses for all ethernet interface */ | |
471 | #if defined(CONFIG_TSEC_ENET) | |
ea5877e3 | 472 | #define CONFIG_HAS_ETH0 |
0cde4b00 JL |
473 | #define CONFIG_ETHADDR 00:E0:0C:02:00:FD |
474 | #define CONFIG_HAS_ETH1 | |
475 | #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD | |
0cde4b00 JL |
476 | #endif |
477 | ||
478 | #define CONFIG_IPADDR 192.168.1.251 | |
479 | ||
480 | #define CONFIG_HOSTNAME 8544ds_unknown | |
481 | #define CONFIG_ROOTPATH /nfs/mpc85xx | |
837f1ba0 ES |
482 | #define CONFIG_BOOTFILE 8544ds/uImage.uboot |
483 | #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ | |
0cde4b00 | 484 | |
50c03c8c KG |
485 | #define CONFIG_SERVERIP 192.168.1.1 |
486 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
0cde4b00 JL |
487 | #define CONFIG_NETMASK 255.255.0.0 |
488 | ||
489 | #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ | |
490 | ||
491 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
837f1ba0 | 492 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ |
0cde4b00 JL |
493 | |
494 | #define CONFIG_BAUDRATE 115200 | |
495 | ||
837f1ba0 ES |
496 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
497 | "netdev=eth0\0" \ | |
498 | "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ | |
499 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
500 | "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ | |
501 | "erase " MK_STR(TEXT_BASE) " +$filesize; " \ | |
502 | "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ | |
503 | "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ | |
504 | "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ | |
0cde4b00 JL |
505 | "consoledev=ttyS0\0" \ |
506 | "ramdiskaddr=2000000\0" \ | |
837f1ba0 | 507 | "ramdiskfile=8544ds/ramdisk.uboot\0" \ |
50c03c8c KG |
508 | "fdtaddr=c00000\0" \ |
509 | "fdtfile=8544ds/mpc8544ds.dtb\0" \ | |
510 | "bdev=sda3\0" | |
0cde4b00 JL |
511 | |
512 | #define CONFIG_NFSBOOTCOMMAND \ | |
513 | "setenv bootargs root=/dev/nfs rw " \ | |
514 | "nfsroot=$serverip:$rootpath " \ | |
515 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
516 | "console=$consoledev,$baudrate $othbootargs;" \ | |
517 | "tftp $loadaddr $bootfile;" \ | |
50c03c8c KG |
518 | "tftp $fdtaddr $fdtfile;" \ |
519 | "bootm $loadaddr - $fdtaddr" | |
0cde4b00 | 520 | |
837f1ba0 | 521 | #define CONFIG_RAMBOOTCOMMAND \ |
0cde4b00 JL |
522 | "setenv bootargs root=/dev/ram rw " \ |
523 | "console=$consoledev,$baudrate $othbootargs;" \ | |
524 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
525 | "tftp $loadaddr $bootfile;" \ | |
50c03c8c KG |
526 | "tftp $fdtaddr $fdtfile;" \ |
527 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
0cde4b00 | 528 | |
837f1ba0 ES |
529 | #define CONFIG_BOOTCOMMAND \ |
530 | "setenv bootargs root=/dev/$bdev rw " \ | |
0cde4b00 JL |
531 | "console=$consoledev,$baudrate $othbootargs;" \ |
532 | "tftp $loadaddr $bootfile;" \ | |
50c03c8c KG |
533 | "tftp $fdtaddr $fdtfile;" \ |
534 | "bootm $loadaddr - $fdtaddr" | |
0cde4b00 JL |
535 | |
536 | #endif /* __CONFIG_H */ |