]>
Commit | Line | Data |
---|---|---|
d9b94f28 | 1 | /* |
f2cff6b1 | 2 | * Copyright 2004, 2007 Freescale Semiconductor. |
d9b94f28 JL |
3 | * |
4 | * See file CREDITS for list of people who contributed to this | |
5 | * project. | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or | |
8 | * modify it under the terms of the GNU General Public License as | |
9 | * published by the Free Software Foundation; either version 2 of | |
10 | * the License, or (at your option) any later version. | |
11 | * | |
12 | * This program is distributed in the hope that it will be useful, | |
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
f2cff6b1 | 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
d9b94f28 JL |
15 | * GNU General Public License for more details. |
16 | * | |
17 | * You should have received a copy of the GNU General Public License | |
18 | * along with this program; if not, write to the Free Software | |
19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
20 | * MA 02111-1307 USA | |
21 | */ | |
22 | ||
23 | /* | |
24 | * mpc8548cds board configuration file | |
25 | * | |
26 | * Please refer to doc/README.mpc85xxcds for more info. | |
27 | * | |
28 | */ | |
29 | #ifndef __CONFIG_H | |
30 | #define __CONFIG_H | |
31 | ||
32 | /* High Level Configuration Options */ | |
33 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
34 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
35 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ | |
36 | #define CONFIG_MPC8548 1 /* MPC8548 specific */ | |
37 | #define CONFIG_MPC8548CDS 1 /* MPC8548CDS board specific */ | |
38 | ||
f2cff6b1 ES |
39 | #define CONFIG_PCI /* enable any pci type devices */ |
40 | #define CONFIG_PCI1 /* PCI controller 1 */ | |
41 | #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ | |
42 | #undef CONFIG_RIO | |
43 | #undef CONFIG_PCI2 | |
44 | #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ | |
45 | ||
46 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ | |
d9b94f28 JL |
47 | #define CONFIG_ENV_OVERWRITE |
48 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ | |
49 | #define CONFIG_DDR_DLL /* possible DLL fix needed */ | |
39b18c4f | 50 | #undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ |
d9b94f28 JL |
51 | |
52 | #define CONFIG_DDR_ECC /* only for ECC DDR module */ | |
53 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ | |
54 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
f2cff6b1 | 55 | #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ |
d9b94f28 JL |
56 | |
57 | ||
58 | /* | |
59 | * When initializing flash, if we cannot find the manufacturer ID, | |
60 | * assume this is the AMD flash associated with the CDS board. | |
61 | * This allows booting from a promjet. | |
62 | */ | |
63 | #define CONFIG_ASSUME_AMD_FLASH | |
64 | ||
65 | #define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ | |
66 | ||
67 | #ifndef __ASSEMBLY__ | |
68 | extern unsigned long get_clock_freq(void); | |
69 | #endif | |
70 | #define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */ | |
71 | ||
72 | /* | |
73 | * These can be toggled for performance analysis, otherwise use default. | |
74 | */ | |
f2cff6b1 ES |
75 | #define CONFIG_L2_CACHE /* toggle L2 cache */ |
76 | #define CONFIG_BTB /* toggle branch predition */ | |
77 | #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ | |
78 | #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ | |
d9b94f28 JL |
79 | |
80 | /* | |
81 | * Only possible on E500 Version 2 or newer cores. | |
82 | */ | |
83 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
84 | ||
d9b94f28 JL |
85 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ |
86 | ||
87 | #undef CFG_DRAM_TEST /* memory test, takes time */ | |
88 | #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ | |
89 | #define CFG_MEMTEST_END 0x00400000 | |
90 | ||
91 | /* | |
92 | * Base addresses -- Note these are effective addresses where the | |
93 | * actual resources get mapped (not physical addresses) | |
94 | */ | |
f2cff6b1 | 95 | #define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ |
d9b94f28 JL |
96 | #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ |
97 | #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ | |
98 | ||
f2cff6b1 ES |
99 | #define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) |
100 | #define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000) | |
101 | #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) | |
102 | ||
d9b94f28 JL |
103 | /* |
104 | * DDR Setup | |
105 | */ | |
106 | #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ | |
107 | #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE | |
108 | ||
109 | #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ | |
110 | ||
111 | /* | |
112 | * Make sure required options are set | |
113 | */ | |
114 | #ifndef CONFIG_SPD_EEPROM | |
115 | #error ("CONFIG_SPD_EEPROM is required") | |
116 | #endif | |
117 | ||
118 | #undef CONFIG_CLOCKS_IN_MHZ | |
119 | ||
d9b94f28 JL |
120 | /* |
121 | * Local Bus Definitions | |
122 | */ | |
123 | ||
124 | /* | |
125 | * FLASH on the Local Bus | |
126 | * Two banks, 8M each, using the CFI driver. | |
127 | * Boot from BR0/OR0 bank at 0xff00_0000 | |
128 | * Alternate BR1/OR1 bank at 0xff80_0000 | |
129 | * | |
130 | * BR0, BR1: | |
131 | * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0 | |
132 | * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0 | |
133 | * Port Size = 16 bits = BRx[19:20] = 10 | |
134 | * Use GPCM = BRx[24:26] = 000 | |
135 | * Valid = BRx[31] = 1 | |
136 | * | |
f2cff6b1 ES |
137 | * 0 4 8 12 16 20 24 28 |
138 | * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0 | |
139 | * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1 | |
d9b94f28 JL |
140 | * |
141 | * OR0, OR1: | |
142 | * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0 | |
143 | * Reserved ORx[17:18] = 11, confusion here? | |
144 | * CSNT = ORx[20] = 1 | |
145 | * ACS = half cycle delay = ORx[21:22] = 11 | |
146 | * SCY = 6 = ORx[24:27] = 0110 | |
147 | * TRLX = use relaxed timing = ORx[29] = 1 | |
148 | * EAD = use external address latch delay = OR[31] = 1 | |
149 | * | |
f2cff6b1 ES |
150 | * 0 4 8 12 16 20 24 28 |
151 | * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx | |
d9b94f28 JL |
152 | */ |
153 | ||
f2cff6b1 ES |
154 | #define CFG_BOOT_BLOCK 0xff000000 /* boot TLB block */ |
155 | #define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */ | |
d9b94f28 JL |
156 | |
157 | #define CFG_BR0_PRELIM 0xff801001 | |
158 | #define CFG_BR1_PRELIM 0xff001001 | |
159 | ||
160 | #define CFG_OR0_PRELIM 0xff806e65 | |
161 | #define CFG_OR1_PRELIM 0xff806e65 | |
162 | ||
163 | #define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE} | |
164 | #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ | |
165 | #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ | |
166 | #undef CFG_FLASH_CHECKSUM | |
167 | #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
168 | #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
169 | ||
f2cff6b1 | 170 | #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ |
d9b94f28 JL |
171 | |
172 | #define CFG_FLASH_CFI_DRIVER | |
173 | #define CFG_FLASH_CFI | |
174 | #define CFG_FLASH_EMPTY_INFO | |
175 | ||
176 | ||
177 | /* | |
178 | * SDRAM on the Local Bus | |
179 | */ | |
f2cff6b1 ES |
180 | #define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ |
181 | #define CFG_LBC_CACHE_SIZE 64 | |
182 | #define CFG_LBC_NONCACHE_BASE 0xf8000000 /* Localbus non-cacheable */ | |
183 | #define CFG_LBC_NONCACHE_SIZE 64 | |
184 | ||
185 | #define CFG_LBC_SDRAM_BASE CFG_LBC_CACHE_BASE /* Localbus SDRAM */ | |
d9b94f28 JL |
186 | #define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ |
187 | ||
188 | /* | |
189 | * Base Register 2 and Option Register 2 configure SDRAM. | |
190 | * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. | |
191 | * | |
192 | * For BR2, need: | |
193 | * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 | |
194 | * port-size = 32-bits = BR2[19:20] = 11 | |
195 | * no parity checking = BR2[21:22] = 00 | |
196 | * SDRAM for MSEL = BR2[24:26] = 011 | |
197 | * Valid = BR[31] = 1 | |
198 | * | |
f2cff6b1 | 199 | * 0 4 8 12 16 20 24 28 |
d9b94f28 JL |
200 | * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 |
201 | * | |
202 | * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into | |
203 | * FIXME: the top 17 bits of BR2. | |
204 | */ | |
205 | ||
f2cff6b1 | 206 | #define CFG_BR2_PRELIM 0xf0001861 |
d9b94f28 JL |
207 | |
208 | /* | |
209 | * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. | |
210 | * | |
211 | * For OR2, need: | |
212 | * 64MB mask for AM, OR2[0:7] = 1111 1100 | |
213 | * XAM, OR2[17:18] = 11 | |
214 | * 9 columns OR2[19-21] = 010 | |
f2cff6b1 | 215 | * 13 rows OR2[23-25] = 100 |
d9b94f28 JL |
216 | * EAD set for extra time OR[31] = 1 |
217 | * | |
f2cff6b1 | 218 | * 0 4 8 12 16 20 24 28 |
d9b94f28 JL |
219 | * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 |
220 | */ | |
221 | ||
222 | #define CFG_OR2_PRELIM 0xfc006901 | |
223 | ||
f2cff6b1 ES |
224 | #define CFG_LBC_LCRR 0x00030004 /* LB clock ratio reg */ |
225 | #define CFG_LBC_LBCR 0x00000000 /* LB config reg */ | |
226 | #define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
227 | #define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ | |
d9b94f28 JL |
228 | |
229 | /* | |
230 | * LSDMR masks | |
231 | */ | |
232 | #define CFG_LBC_LSDMR_RFEN (1 << (31 - 1)) | |
233 | #define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10)) | |
234 | #define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10)) | |
235 | #define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16)) | |
236 | #define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19)) | |
237 | #define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22)) | |
238 | #define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22)) | |
239 | #define CFG_LBC_LSDMR_BL8 (1 << (31 - 23)) | |
240 | #define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27)) | |
241 | #define CFG_LBC_LSDMR_CL3 (3 << (31 - 31)) | |
242 | ||
243 | #define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4)) | |
244 | #define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4)) | |
245 | #define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4)) | |
246 | #define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4)) | |
247 | #define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4)) | |
248 | #define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4)) | |
249 | #define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4)) | |
250 | #define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4)) | |
251 | ||
252 | /* | |
253 | * Common settings for all Local Bus SDRAM commands. | |
254 | * At run time, either BSMA1516 (for CPU 1.1) | |
f2cff6b1 | 255 | * or BSMA1617 (for CPU 1.0) (old) |
d9b94f28 JL |
256 | * is OR'ed in too. |
257 | */ | |
258 | #define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \ | |
259 | | CFG_LBC_LSDMR_PRETOACT7 \ | |
260 | | CFG_LBC_LSDMR_ACTTORW7 \ | |
261 | | CFG_LBC_LSDMR_BL8 \ | |
262 | | CFG_LBC_LSDMR_WRC4 \ | |
263 | | CFG_LBC_LSDMR_CL3 \ | |
264 | | CFG_LBC_LSDMR_RFEN \ | |
265 | ) | |
266 | ||
267 | /* | |
268 | * The CADMUS registers are connected to CS3 on CDS. | |
269 | * The new memory map places CADMUS at 0xf8000000. | |
270 | * | |
271 | * For BR3, need: | |
272 | * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0 | |
273 | * port-size = 8-bits = BR[19:20] = 01 | |
274 | * no parity checking = BR[21:22] = 00 | |
f2cff6b1 ES |
275 | * GPMC for MSEL = BR[24:26] = 000 |
276 | * Valid = BR[31] = 1 | |
d9b94f28 | 277 | * |
f2cff6b1 | 278 | * 0 4 8 12 16 20 24 28 |
d9b94f28 JL |
279 | * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801 |
280 | * | |
281 | * For OR3, need: | |
f2cff6b1 | 282 | * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0 |
d9b94f28 | 283 | * disable buffer ctrl OR[19] = 0 |
f2cff6b1 ES |
284 | * CSNT OR[20] = 1 |
285 | * ACS OR[21:22] = 11 | |
286 | * XACS OR[23] = 1 | |
d9b94f28 | 287 | * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe |
f2cff6b1 ES |
288 | * SETA OR[28] = 0 |
289 | * TRLX OR[29] = 1 | |
290 | * EHTR OR[30] = 1 | |
291 | * EAD extra time OR[31] = 1 | |
d9b94f28 | 292 | * |
f2cff6b1 | 293 | * 0 4 8 12 16 20 24 28 |
d9b94f28 JL |
294 | * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7 |
295 | */ | |
296 | ||
297 | #define CADMUS_BASE_ADDR 0xf8000000 | |
f2cff6b1 ES |
298 | #define CFG_BR3_PRELIM 0xf8000801 |
299 | #define CFG_OR3_PRELIM 0xfff00ff7 | |
d9b94f28 JL |
300 | |
301 | #define CONFIG_L1_INIT_RAM | |
f2cff6b1 | 302 | #define CFG_INIT_RAM_LOCK 1 |
d9b94f28 | 303 | #define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ |
f2cff6b1 ES |
304 | #define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */ |
305 | ||
306 | #define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ | |
d9b94f28 | 307 | |
f2cff6b1 | 308 | #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ |
d9b94f28 JL |
309 | #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) |
310 | #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET | |
311 | ||
f2cff6b1 ES |
312 | #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
313 | #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ | |
d9b94f28 JL |
314 | |
315 | /* Serial Port */ | |
f2cff6b1 | 316 | #define CONFIG_CONS_INDEX 2 |
d9b94f28 JL |
317 | #undef CONFIG_SERIAL_SOFTWARE_FIFO |
318 | #define CFG_NS16550 | |
319 | #define CFG_NS16550_SERIAL | |
f2cff6b1 | 320 | #define CFG_NS16550_REG_SIZE 1 |
d9b94f28 JL |
321 | #define CFG_NS16550_CLK get_bus_freq(0) |
322 | ||
f2cff6b1 | 323 | #define CFG_BAUDRATE_TABLE \ |
d9b94f28 JL |
324 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
325 | ||
f2cff6b1 ES |
326 | #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) |
327 | #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) | |
d9b94f28 JL |
328 | |
329 | /* Use the HUSH parser */ | |
330 | #define CFG_HUSH_PARSER | |
f2cff6b1 | 331 | #ifdef CFG_HUSH_PARSER |
d9b94f28 JL |
332 | #define CFG_PROMPT_HUSH_PS2 "> " |
333 | #endif | |
334 | ||
40d5fa35 MM |
335 | /* pass open firmware flat tree */ |
336 | #define CONFIG_OF_FLAT_TREE 1 | |
337 | #define CONFIG_OF_BOARD_SETUP 1 | |
338 | ||
339 | /* maximum size of the flat tree (8K) */ | |
340 | #define OF_FLAT_TREE_MAX_SIZE 8192 | |
341 | ||
342 | #define OF_CPU "PowerPC,8548@0" | |
343 | #define OF_SOC "soc8548@e0000000" | |
344 | #define OF_TBCLK (bd->bi_busfreq / 8) | |
cbfc7ce7 | 345 | #define OF_STDOUT_PATH "/soc8548@e0000000/serial@4600" |
40d5fa35 | 346 | |
20476726 JL |
347 | /* |
348 | * I2C | |
349 | */ | |
350 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
351 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
f2cff6b1 | 352 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ |
d9b94f28 JL |
353 | #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ |
354 | #define CFG_I2C_EEPROM_ADDR 0x57 | |
355 | #define CFG_I2C_SLAVE 0x7F | |
f2cff6b1 | 356 | #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ |
20476726 | 357 | #define CFG_I2C_OFFSET 0x3000 |
d9b94f28 JL |
358 | |
359 | /* | |
360 | * General PCI | |
362dd830 | 361 | * Memory space is mapped 1-1, but I/O space must start from 0. |
d9b94f28 | 362 | */ |
f2cff6b1 ES |
363 | #define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */ |
364 | ||
d9b94f28 JL |
365 | #define CFG_PCI1_MEM_BASE 0x80000000 |
366 | #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE | |
f2cff6b1 | 367 | #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ |
cbfc7ce7 MM |
368 | #define CFG_PCI1_IO_BASE 0x00000000 |
369 | #define CFG_PCI1_IO_PHYS 0xe2000000 | |
f2cff6b1 | 370 | #define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ |
d9b94f28 | 371 | |
f2cff6b1 ES |
372 | #ifdef CONFIG_PCI2 |
373 | #define CFG_PCI2_MEM_BASE 0xa0000000 | |
d9b94f28 | 374 | #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE |
f2cff6b1 | 375 | #define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ |
ffa621a0 | 376 | #define CFG_PCI2_IO_BASE 0x00000000 |
41fb7e0f | 377 | #define CFG_PCI2_IO_PHYS 0xe2800000 |
f2cff6b1 ES |
378 | #define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ |
379 | #endif | |
41fb7e0f | 380 | |
f2cff6b1 ES |
381 | #ifdef CONFIG_PCIE1 |
382 | #define CFG_PCIE1_MEM_BASE 0xa0000000 | |
383 | #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE | |
384 | #define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
385 | #define CFG_PCIE1_IO_BASE 0x00000000 | |
386 | #define CFG_PCIE1_IO_PHYS 0xe3000000 | |
387 | #define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */ | |
388 | #endif | |
d9b94f28 | 389 | |
f2cff6b1 | 390 | #ifdef CONFIG_RIO |
41fb7e0f ZR |
391 | /* |
392 | * RapidIO MMU | |
393 | */ | |
394 | #define CFG_RIO_MEM_BASE 0xC0000000 | |
395 | #define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */ | |
f2cff6b1 | 396 | #endif |
d9b94f28 | 397 | |
7f3f2bd2 RV |
398 | #ifdef CONFIG_LEGACY |
399 | #define BRIDGE_ID 17 | |
400 | #define VIA_ID 2 | |
401 | #else | |
402 | #define BRIDGE_ID 28 | |
403 | #define VIA_ID 4 | |
404 | #endif | |
405 | ||
d9b94f28 JL |
406 | #if defined(CONFIG_PCI) |
407 | ||
408 | #define CONFIG_NET_MULTI | |
f2cff6b1 | 409 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
d9b94f28 JL |
410 | |
411 | #undef CONFIG_EEPRO100 | |
412 | #undef CONFIG_TULIP | |
413 | ||
d9b94f28 | 414 | #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
f2cff6b1 ES |
415 | |
416 | /* PCI view of System Memory */ | |
417 | #define CFG_PCI_MEMORY_BUS 0x00000000 | |
418 | #define CFG_PCI_MEMORY_PHYS 0x00000000 | |
419 | #define CFG_PCI_MEMORY_SIZE 0x80000000 | |
d9b94f28 JL |
420 | |
421 | #endif /* CONFIG_PCI */ | |
422 | ||
423 | ||
424 | #if defined(CONFIG_TSEC_ENET) | |
425 | ||
426 | #ifndef CONFIG_NET_MULTI | |
f2cff6b1 | 427 | #define CONFIG_NET_MULTI 1 |
d9b94f28 JL |
428 | #endif |
429 | ||
430 | #define CONFIG_MII 1 /* MII PHY management */ | |
255a3577 KP |
431 | #define CONFIG_TSEC1 1 |
432 | #define CONFIG_TSEC1_NAME "eTSEC0" | |
433 | #define CONFIG_TSEC2 1 | |
434 | #define CONFIG_TSEC2_NAME "eTSEC1" | |
435 | #define CONFIG_TSEC3 1 | |
436 | #define CONFIG_TSEC3_NAME "eTSEC2" | |
f2cff6b1 | 437 | #define CONFIG_TSEC4 |
255a3577 | 438 | #define CONFIG_TSEC4_NAME "eTSEC3" |
d9b94f28 JL |
439 | #undef CONFIG_MPC85XX_FEC |
440 | ||
441 | #define TSEC1_PHY_ADDR 0 | |
442 | #define TSEC2_PHY_ADDR 1 | |
443 | #define TSEC3_PHY_ADDR 2 | |
444 | #define TSEC4_PHY_ADDR 3 | |
d9b94f28 JL |
445 | |
446 | #define TSEC1_PHYIDX 0 | |
447 | #define TSEC2_PHYIDX 0 | |
448 | #define TSEC3_PHYIDX 0 | |
449 | #define TSEC4_PHYIDX 0 | |
3a79013e AF |
450 | #define TSEC1_FLAGS TSEC_GIGABIT |
451 | #define TSEC2_FLAGS TSEC_GIGABIT | |
452 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
453 | #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
d9b94f28 JL |
454 | |
455 | /* Options are: eTSEC[0-3] */ | |
456 | #define CONFIG_ETHPRIME "eTSEC0" | |
f2cff6b1 | 457 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ |
d9b94f28 JL |
458 | #endif /* CONFIG_TSEC_ENET */ |
459 | ||
460 | /* | |
461 | * Environment | |
462 | */ | |
463 | #define CFG_ENV_IS_IN_FLASH 1 | |
464 | #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) | |
465 | #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ | |
466 | #define CFG_ENV_SIZE 0x2000 | |
467 | ||
468 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
469 | #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
470 | ||
659e2f67 JL |
471 | /* |
472 | * BOOTP options | |
473 | */ | |
474 | #define CONFIG_BOOTP_BOOTFILESIZE | |
475 | #define CONFIG_BOOTP_BOOTPATH | |
476 | #define CONFIG_BOOTP_GATEWAY | |
477 | #define CONFIG_BOOTP_HOSTNAME | |
478 | ||
479 | ||
2835e518 JL |
480 | /* |
481 | * Command line configuration. | |
482 | */ | |
483 | #include <config_cmd_default.h> | |
484 | ||
485 | #define CONFIG_CMD_PING | |
486 | #define CONFIG_CMD_I2C | |
487 | #define CONFIG_CMD_MII | |
488 | ||
d9b94f28 | 489 | #if defined(CONFIG_PCI) |
2835e518 | 490 | #define CONFIG_CMD_PCI |
d9b94f28 | 491 | #endif |
2835e518 | 492 | |
d9b94f28 JL |
493 | |
494 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
495 | ||
496 | /* | |
497 | * Miscellaneous configurable options | |
498 | */ | |
499 | #define CFG_LONGHELP /* undef to save memory */ | |
500 | #define CFG_LOAD_ADDR 0x2000000 /* default load address */ | |
501 | #define CFG_PROMPT "=> " /* Monitor Command Prompt */ | |
2835e518 | 502 | #if defined(CONFIG_CMD_KGDB) |
d9b94f28 JL |
503 | #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
504 | #else | |
505 | #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
506 | #endif | |
507 | #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
508 | #define CFG_MAXARGS 16 /* max number of command args */ | |
509 | #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
510 | #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ | |
511 | ||
512 | /* | |
513 | * For booting Linux, the board info and command line data | |
514 | * have to be in the first 8 MB of memory, since this is | |
515 | * the maximum mapped by the Linux kernel during initialization. | |
516 | */ | |
f2cff6b1 | 517 | #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
d9b94f28 JL |
518 | |
519 | /* Cache Configuration */ | |
520 | #define CFG_DCACHE_SIZE 32768 | |
521 | #define CFG_CACHELINE_SIZE 32 | |
2835e518 | 522 | #if defined(CONFIG_CMD_KGDB) |
d9b94f28 JL |
523 | #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ |
524 | #endif | |
525 | ||
526 | /* | |
527 | * Internal Definitions | |
528 | * | |
529 | * Boot Flags | |
530 | */ | |
531 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
532 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
533 | ||
2835e518 | 534 | #if defined(CONFIG_CMD_KGDB) |
d9b94f28 JL |
535 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ |
536 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
537 | #endif | |
538 | ||
539 | /* | |
540 | * Environment Configuration | |
541 | */ | |
542 | ||
543 | /* The mac addresses for all ethernet interface */ | |
544 | #if defined(CONFIG_TSEC_ENET) | |
f2cff6b1 | 545 | #define CONFIG_ETHADDR 00:E0:0C:00:00:FD |
d9b94f28 | 546 | #define CONFIG_HAS_ETH1 |
f2cff6b1 | 547 | #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD |
d9b94f28 | 548 | #define CONFIG_HAS_ETH2 |
f2cff6b1 | 549 | #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD |
09f3e09e | 550 | #define CONFIG_HAS_ETH3 |
f2cff6b1 | 551 | #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD |
d9b94f28 JL |
552 | #endif |
553 | ||
f2cff6b1 | 554 | #define CONFIG_IPADDR 192.168.1.253 |
d9b94f28 | 555 | |
f2cff6b1 ES |
556 | #define CONFIG_HOSTNAME unknown |
557 | #define CONFIG_ROOTPATH /nfsroot | |
558 | #define CONFIG_BOOTFILE 8548cds/uImage.uboot | |
559 | #define CONFIG_UBOOTPATH 8548cds/u-boot.bin /* TFTP server */ | |
d9b94f28 | 560 | |
f2cff6b1 | 561 | #define CONFIG_SERVERIP 192.168.1.1 |
d9b94f28 | 562 | #define CONFIG_GATEWAYIP 192.168.1.1 |
f2cff6b1 | 563 | #define CONFIG_NETMASK 255.255.255.0 |
d9b94f28 | 564 | |
f2cff6b1 | 565 | #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ |
d9b94f28 | 566 | |
f2cff6b1 ES |
567 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ |
568 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ | |
d9b94f28 JL |
569 | |
570 | #define CONFIG_BAUDRATE 115200 | |
571 | ||
f2cff6b1 ES |
572 | #if defined(CONFIG_PCIE1) |
573 | #define PCIE_ENV \ | |
574 | "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ | |
575 | "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ | |
576 | "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ | |
577 | "pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \ | |
578 | "pci d $b.0 130 1\0" \ | |
579 | "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \ | |
580 | "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\ | |
581 | "pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \ | |
582 | "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ | |
583 | "pcie1regs=setenv a e000a; run pciereg\0" \ | |
584 | "pcie1cfg=setenv b 3; run pciecfg\0" \ | |
585 | "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ | |
586 | "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" | |
587 | #else | |
588 | #define PCIE_ENV "" | |
589 | #endif | |
8272dc2f | 590 | |
f2cff6b1 ES |
591 | #if defined(CONFIG_PCI1) || defined(CONFIG_PCI2) |
592 | #define PCI_ENV \ | |
593 | "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ | |
594 | "echo e;md ${a}e00 9\0" \ | |
595 | "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \ | |
596 | "pci d.w $b.0 56 1\0" \ | |
597 | "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ | |
598 | "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" | |
599 | #else | |
600 | #define PCI_ENV "" | |
601 | #endif | |
d9b94f28 | 602 | |
f2cff6b1 ES |
603 | #if defined(CONFIG_PCI1) |
604 | #define PCI_ENV1 \ | |
605 | "pci1regs=setenv a e0008; run pcireg\0" \ | |
606 | "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \ | |
607 | "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0" | |
608 | #else | |
609 | #define PCI_ENV1 "" | |
610 | #endif | |
611 | ||
612 | #if defined(CONFIG_PCI2) | |
613 | #define PCI_ENV2 \ | |
614 | "pci2regs=setenv a e0009; run pcireg\0" \ | |
615 | "pci2err=setenv a e0009; setenv b 123; run pcierr\0" \ | |
616 | "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0" | |
617 | #else | |
618 | #define PCI_ENV2 "" | |
619 | #endif | |
620 | ||
621 | #if defined(CONFIG_TSEC_ENET) | |
622 | #define ENET_ENV \ | |
623 | "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ | |
624 | "md ${a}098 2\0" \ | |
625 | "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ | |
626 | "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ | |
627 | "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ | |
628 | "echo mib;md ${a}680 31\0" \ | |
629 | "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ | |
630 | "enet1regs=setenv a e0024; run enetreg\0" \ | |
631 | "enet2regs=setenv a e0025; run enetreg\0" \ | |
632 | "enet3regs=setenv a e0026; run enetreg\0" \ | |
633 | "enet4regs=setenv a e0027; run enetreg\0" | |
634 | #else | |
635 | #define ENET_ENV "" | |
636 | #endif | |
637 | ||
6c543597 | 638 | #if 0 |
f2cff6b1 ES |
639 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
640 | "netdev=eth0\0" \ | |
641 | "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ | |
642 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
643 | "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ | |
644 | "erase " MK_STR(TEXT_BASE) " +$filesize; " \ | |
645 | "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ | |
646 | "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ | |
647 | "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ | |
648 | "consoledev=ttyS1\0" \ | |
649 | "ramdiskaddr=2000000\0" \ | |
6c543597 | 650 | "ramdiskfile=ramdisk.uboot\0" \ |
f2cff6b1 | 651 | "dtbaddr=c00000\0" \ |
6c543597 | 652 | "dtbfile=mpc8548cds.dtb\0" \ |
f2cff6b1 ES |
653 | "eoi=mw e00400b0 0\0" \ |
654 | "iack=md e00400a0 1\0" \ | |
655 | "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ | |
656 | "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ | |
657 | "ddrregs=setenv a e0002; run ddrreg\0" \ | |
658 | "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ | |
659 | "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ | |
660 | "guregs=setenv a e00e0; run gureg\0" \ | |
661 | "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ | |
662 | "ecmregs=setenv a e0001; run ecmreg\0" \ | |
663 | "lawregs=md e0000c08 4b\0" \ | |
664 | "lbcregs=md e0005000 36\0" \ | |
665 | "dma0regs=md e0021100 12\0" \ | |
666 | "dma1regs=md e0021180 12\0" \ | |
667 | "dma2regs=md e0021200 12\0" \ | |
668 | "dma3regs=md e0021280 12\0" \ | |
669 | PCIE_ENV \ | |
670 | PCI_ENV \ | |
671 | PCI_ENV1 \ | |
672 | PCI_ENV2 \ | |
673 | ENET_ENV | |
6c543597 | 674 | #endif |
f2cff6b1 ES |
675 | |
676 | ||
677 | #define CONFIG_NFSBOOTCOMMAND \ | |
678 | "setenv bootargs root=/dev/nfs rw " \ | |
679 | "nfsroot=$serverip:$rootpath " \ | |
d9b94f28 | 680 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ |
f2cff6b1 ES |
681 | "console=$consoledev,$baudrate $othbootargs;" \ |
682 | "tftp $loadaddr $bootfile;" \ | |
683 | "tftp $dtbaddr $dtbfile;" \ | |
684 | "bootm $loadaddr - $dtbaddr" | |
8272dc2f | 685 | |
d9b94f28 JL |
686 | |
687 | #define CONFIG_RAMBOOTCOMMAND \ | |
f2cff6b1 ES |
688 | "setenv bootargs root=/dev/ram rw " \ |
689 | "console=$consoledev,$baudrate $othbootargs;" \ | |
690 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
691 | "tftp $loadaddr $bootfile;" \ | |
692 | "tftp $dtbaddr $dtbfile;" \ | |
693 | "bootm $loadaddr $ramdiskaddr $dtbaddr" | |
694 | ||
695 | #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND | |
d9b94f28 JL |
696 | |
697 | #endif /* __CONFIG_H */ |