projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 4f1d1b7d MH |
1 | /* |
| 2 | * Copyright 2011 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 4 | * See file CREDITS for list of people who contributed to this | |
| 5 | * project. | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or | |
| 8 | * modify it under the terms of the GNU General Public License as | |
| 9 | * published by the Free Software Foundation; either version 2 of | |
| 10 | * the License, or (at your option) any later version. | |
| 11 | * | |
| 12 | * This program is distributed in the hope that it will be useful, | |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | * GNU General Public License for more details. | |
| 16 | * | |
| 17 | * You should have received a copy of the GNU General Public License | |
| 18 | * along with this program; if not, write to the Free Software | |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 20 | * MA 02111-1307 USA | |
| 21 | */ | |
| 22 | ||
| 23 | /* | |
| 24 | * P2041 RDB board configuration file | |
| 25 | * | |
| 26 | */ | |
| 27 | #ifndef __CONFIG_H | |
| 28 | #define __CONFIG_H | |
| 29 | ||
| 30 | #define CONFIG_P2041RDB | |
| 31 | #define CONFIG_PHYS_64BIT | |
| 32 | #define CONFIG_PPC_P2041 | |
| 33 | ||
| 34 | #ifdef CONFIG_RAMBOOT_PBL | |
| 35 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 36 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| 37 | #endif | |
| 38 | ||
| 39 | /* High Level Configuration Options */ | |
| 40 | #define CONFIG_BOOKE | |
| 41 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 42 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
| 43 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
| 44 | #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ | |
| 45 | #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ | |
| 46 | #define CONFIG_MP /* support multiple processors */ | |
| 47 | ||
| 48 | #ifndef CONFIG_SYS_TEXT_BASE | |
| 49 | #define CONFIG_SYS_TEXT_BASE 0xeff80000 | |
| 50 | #endif | |
| 51 | ||
| 52 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 53 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 54 | #endif | |
| 55 | ||
| 56 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 57 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 58 | #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ | |
| 59 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
| 60 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
| 61 | #define CONFIG_PCIE2 /* PCIE controler 2 */ | |
| 62 | #define CONFIG_PCIE3 /* PCIE controler 3 */ | |
| 63 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 64 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 65 | ||
| 66 | #define CONFIG_SYS_SRIO | |
| 67 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
| 68 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
| 4d28db8a | 69 | #define CONFIG_SYS_DPAA_RMAN /* RMan */ |
| 4f1d1b7d MH |
70 | |
| 71 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 72 | ||
| 73 | #define CONFIG_ENV_OVERWRITE | |
| 74 | ||
| 75 | #ifdef CONFIG_SYS_NO_FLASH | |
| 76 | #define CONFIG_ENV_IS_NOWHERE | |
| 77 | #else | |
| 78 | #define CONFIG_FLASH_CFI_DRIVER | |
| 79 | #define CONFIG_SYS_FLASH_CFI | |
| 80 | #endif | |
| 81 | ||
| 82 | #if defined(CONFIG_SPIFLASH) | |
| 83 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 84 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 85 | #define CONFIG_ENV_SPI_BUS 0 | |
| 86 | #define CONFIG_ENV_SPI_CS 0 | |
| 87 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 88 | #define CONFIG_ENV_SPI_MODE 0 | |
| 89 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 90 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 91 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 92 | #elif defined(CONFIG_SDCARD) | |
| 93 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 94 | #define CONFIG_ENV_IS_IN_MMC | |
| 95 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 96 | #define CONFIG_ENV_SIZE 0x2000 | |
| 97 | #define CONFIG_ENV_OFFSET (512 * 1097) | |
| 98 | #else | |
| 99 | #define CONFIG_ENV_IS_IN_FLASH | |
| 100 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ | |
| 101 | - CONFIG_ENV_SECT_SIZE) | |
| 102 | #define CONFIG_ENV_SIZE 0x2000 | |
| 103 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 104 | #endif | |
| 105 | ||
| 44d50f0b SX |
106 | #ifndef __ASSEMBLY__ |
| 107 | unsigned long get_board_sys_clk(unsigned long dummy); | |
| 108 | #endif | |
| 109 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) | |
| 4f1d1b7d MH |
110 | |
| 111 | /* | |
| 112 | * These can be toggled for performance analysis, otherwise use default. | |
| 113 | */ | |
| 114 | #define CONFIG_SYS_CACHE_STASHING | |
| cd420e0b MH |
115 | #define CONFIG_BACKSIDE_L2_CACHE |
| 116 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E | |
| 4f1d1b7d MH |
117 | #define CONFIG_BTB /* toggle branch predition */ |
| 118 | ||
| 119 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 120 | ||
| 121 | #ifdef CONFIG_PHYS_64BIT | |
| 122 | #define CONFIG_ADDR_MAP | |
| 123 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 124 | #endif | |
| 125 | ||
| 126 | #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ | |
| 127 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 128 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 129 | #define CONFIG_SYS_ALT_MEMTEST | |
| 130 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 131 | ||
| 132 | /* | |
| 133 | * Config the L3 Cache as L3 SRAM | |
| 134 | */ | |
| 135 | #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE | |
| 136 | #ifdef CONFIG_PHYS_64BIT | |
| 137 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ | |
| 138 | CONFIG_RAMBOOT_TEXT_BASE) | |
| 139 | #else | |
| 140 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR | |
| 141 | #endif | |
| 142 | #define CONFIG_SYS_L3_SIZE (1024 << 10) | |
| 143 | #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) | |
| 144 | ||
| 4f1d1b7d MH |
145 | #ifdef CONFIG_PHYS_64BIT |
| 146 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 147 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 148 | #endif | |
| 149 | ||
| 150 | /* EEPROM */ | |
| 151 | #define CONFIG_ID_EEPROM | |
| 152 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 153 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 154 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
| 155 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 156 | ||
| 157 | /* | |
| 158 | * DDR Setup | |
| 159 | */ | |
| 160 | #define CONFIG_VERY_BIG_RAM | |
| 161 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 162 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 163 | ||
| 164 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 165 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 166 | ||
| 167 | #define CONFIG_DDR_SPD | |
| 168 | #define CONFIG_FSL_DDR3 | |
| 169 | ||
| 170 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 171 | #define SPD_EEPROM_ADDRESS 0x52 | |
| 172 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 173 | ||
| 174 | /* | |
| 175 | * Local Bus Definitions | |
| 176 | */ | |
| 177 | ||
| 178 | /* Set the local bus clock 1/8 of platform clock */ | |
| 179 | #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 | |
| 180 | ||
| 181 | #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* Start of PromJet */ | |
| 182 | #ifdef CONFIG_PHYS_64BIT | |
| 183 | #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull | |
| 184 | #else | |
| 185 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 186 | #endif | |
| 187 | ||
| 188 | #define CONFIG_SYS_BR0_PRELIM \ | |
| 189 | (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) | |
| 190 | #define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ | |
| 191 | | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) | |
| 192 | ||
| 193 | #define CONFIG_FSL_CPLD | |
| 194 | #define CPLD_BASE 0xffdf0000 /* CPLD registers */ | |
| 195 | #ifdef CONFIG_PHYS_64BIT | |
| 196 | #define CPLD_BASE_PHYS 0xfffdf0000ull | |
| 197 | #else | |
| 198 | #define CPLD_BASE_PHYS CPLD_BASE | |
| 199 | #endif | |
| 200 | ||
| 201 | #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) | |
| 202 | #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ | |
| 203 | ||
| 204 | #define PIXIS_LBMAP_SWITCH 7 | |
| 205 | #define PIXIS_LBMAP_MASK 0xf0 | |
| 206 | #define PIXIS_LBMAP_SHIFT 4 | |
| 207 | #define PIXIS_LBMAP_ALTBANK 0x40 | |
| 208 | ||
| 209 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 210 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 211 | ||
| 212 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 213 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 214 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ | |
| 215 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ | |
| 216 | ||
| 217 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| 218 | ||
| 219 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 220 | #define CONFIG_SYS_RAMBOOT | |
| 221 | #endif | |
| 222 | ||
| 223 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 224 | #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 | |
| 225 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} | |
| 226 | ||
| 227 | #define CONFIG_BOARD_EARLY_INIT_F | |
| 228 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 229 | #define CONFIG_MISC_INIT_R | |
| 230 | ||
| 231 | #define CONFIG_HWCONFIG | |
| 232 | ||
| 233 | /* define to use L1 as initial stack */ | |
| 234 | #define CONFIG_L1_INIT_RAM | |
| 235 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 236 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
| 237 | #ifdef CONFIG_PHYS_64BIT | |
| 238 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 239 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR | |
| 240 | /* The assembler doesn't like typecast */ | |
| 241 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 242 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 243 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 244 | #else | |
| 245 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR | |
| 246 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 | |
| 247 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 248 | #endif | |
| 249 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 250 | ||
| 251 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 252 | GENERATED_GBL_DATA_SIZE) | |
| 253 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 254 | ||
| 255 | #define CONFIG_SYS_MONITOR_LEN (512 * 1024) | |
| 256 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) | |
| 257 | ||
| 258 | /* Serial Port - controlled on board with jumper J8 | |
| 259 | * open - index 2 | |
| 260 | * shorted - index 1 | |
| 261 | */ | |
| 262 | #define CONFIG_CONS_INDEX 1 | |
| 263 | #define CONFIG_SYS_NS16550 | |
| 264 | #define CONFIG_SYS_NS16550_SERIAL | |
| 265 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 266 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 267 | ||
| 268 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 269 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 270 | ||
| 271 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 272 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 273 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 274 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 275 | ||
| 276 | /* Use the HUSH parser */ | |
| 277 | #define CONFIG_SYS_HUSH_PARSER | |
| 278 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 279 | ||
| 280 | /* pass open firmware flat tree */ | |
| 281 | #define CONFIG_OF_LIBFDT | |
| 282 | #define CONFIG_OF_BOARD_SETUP | |
| 283 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 284 | ||
| 285 | /* new uImage format support */ | |
| 286 | #define CONFIG_FIT | |
| 287 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
| 288 | ||
| 289 | /* I2C */ | |
| 290 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
| 291 | #define CONFIG_HARD_I2C /* I2C with hardware support */ | |
| 292 | #define CONFIG_I2C_MULTI_BUS | |
| 293 | #define CONFIG_I2C_CMD_TREE | |
| 294 | #define CONFIG_SYS_I2C_SPEED 400000 | |
| 295 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 296 | #define CONFIG_SYS_I2C_OFFSET 0x118000 | |
| 297 | #define CONFIG_SYS_I2C2_OFFSET 0x118100 | |
| 298 | ||
| 299 | /* | |
| 300 | * RapidIO | |
| 301 | */ | |
| 302 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
| 303 | #ifdef CONFIG_PHYS_64BIT | |
| 304 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
| 305 | #else | |
| 306 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 | |
| 307 | #endif | |
| 308 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
| 309 | ||
| 310 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
| 311 | #ifdef CONFIG_PHYS_64BIT | |
| 312 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
| 313 | #else | |
| 314 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 | |
| 315 | #endif | |
| 316 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
| 317 | ||
| 318 | /* | |
| 319 | * eSPI - Enhanced SPI | |
| 320 | */ | |
| 321 | #define CONFIG_FSL_ESPI | |
| 322 | #define CONFIG_SPI_FLASH | |
| 323 | #define CONFIG_SPI_FLASH_SPANSION | |
| 324 | #define CONFIG_CMD_SF | |
| 325 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 326 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 327 | ||
| 328 | /* | |
| 329 | * General PCI | |
| 330 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 331 | */ | |
| 332 | ||
| 333 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 334 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 335 | #ifdef CONFIG_PHYS_64BIT | |
| 336 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 337 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 338 | #else | |
| 339 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 340 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 341 | #endif | |
| 342 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 343 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 344 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 345 | #ifdef CONFIG_PHYS_64BIT | |
| 346 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 347 | #else | |
| 348 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 | |
| 349 | #endif | |
| 350 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 351 | ||
| 352 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 353 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
| 354 | #ifdef CONFIG_PHYS_64BIT | |
| 355 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 356 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
| 357 | #else | |
| 358 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 | |
| 359 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 | |
| 360 | #endif | |
| 361 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 362 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 363 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 364 | #ifdef CONFIG_PHYS_64BIT | |
| 365 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 366 | #else | |
| 367 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 | |
| 368 | #endif | |
| 369 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 370 | ||
| 371 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 372 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 | |
| 373 | #ifdef CONFIG_PHYS_64BIT | |
| 374 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 375 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull | |
| 376 | #else | |
| 377 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 | |
| 378 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 | |
| 379 | #endif | |
| 380 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ | |
| 381 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 382 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 383 | #ifdef CONFIG_PHYS_64BIT | |
| 384 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 385 | #else | |
| 386 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 | |
| 387 | #endif | |
| 388 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 389 | ||
| 390 | /* Qman/Bman */ | |
| 391 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 392 | #define CONFIG_SYS_BMAN_NUM_PORTALS 10 | |
| 393 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 394 | #ifdef CONFIG_PHYS_64BIT | |
| 395 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 396 | #else | |
| 397 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE | |
| 398 | #endif | |
| 399 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 | |
| 400 | #define CONFIG_SYS_QMAN_NUM_PORTALS 10 | |
| 401 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 | |
| 402 | #ifdef CONFIG_PHYS_64BIT | |
| 403 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull | |
| 404 | #else | |
| 405 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE | |
| 406 | #endif | |
| 407 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 | |
| 408 | ||
| 409 | #define CONFIG_SYS_DPAA_FMAN | |
| 410 | #define CONFIG_SYS_DPAA_PME | |
| 411 | /* Default address of microcode for the Linux Fman driver */ | |
| 4f1d1b7d MH |
412 | #if defined(CONFIG_SPIFLASH) |
| 413 | /* | |
| 414 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 415 | * env, so we got 0x110000. | |
| 416 | */ | |
| 417 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH 0x110000 | |
| 418 | #elif defined(CONFIG_SDCARD) | |
| 419 | /* | |
| 420 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| 421 | * about 545KB (1089 blocks), Env is stored after the image, and the env size is | |
| 422 | * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. | |
| 423 | */ | |
| 424 | #define CONFIG_SYS_QE_FW_IN_MMC (512 * 1130) | |
| 425 | #elif defined(CONFIG_NAND) | |
| 426 | #define CONFIG_SYS_QE_FW_IN_NAND (6 * CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 427 | #else | |
| 428 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000 | |
| 429 | #endif | |
| 430 | #define CONFIG_SYS_FMAN_FW_LENGTH 0x10000 | |
| 431 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_FMAN_FW_LENGTH) | |
| 432 | ||
| 433 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 434 | #define CONFIG_FMAN_ENET | |
| 0787ecc0 MH |
435 | #define CONFIG_PHYLIB_10G |
| 436 | #define CONFIG_PHY_VITESSE | |
| 437 | #define CONFIG_PHY_TERANETICS | |
| 4f1d1b7d MH |
438 | #endif |
| 439 | ||
| 440 | #ifdef CONFIG_PCI | |
| 4f1d1b7d MH |
441 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| 442 | #define CONFIG_E1000 | |
| 443 | ||
| 444 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 445 | #define CONFIG_DOS_PARTITION | |
| 446 | #endif /* CONFIG_PCI */ | |
| 447 | ||
| aa7f281c MH |
448 | /* SATA */ |
| 449 | #define CONFIG_FSL_SATA_V2 | |
| 450 | #ifdef CONFIG_FSL_SATA_V2 | |
| 451 | #define CONFIG_LIBATA | |
| 452 | #define CONFIG_FSL_SATA | |
| 453 | ||
| 454 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 455 | #define CONFIG_SATA1 | |
| 456 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 457 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 458 | #define CONFIG_SATA2 | |
| 459 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 460 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 461 | ||
| 462 | #define CONFIG_LBA48 | |
| 463 | #define CONFIG_CMD_SATA | |
| 464 | #define CONFIG_DOS_PARTITION | |
| 465 | #define CONFIG_CMD_EXT2 | |
| 466 | #endif | |
| 467 | ||
| 4f1d1b7d MH |
468 | #ifdef CONFIG_FMAN_ENET |
| 469 | #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 | |
| 470 | #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 | |
| 471 | #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 | |
| 472 | #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 | |
| 473 | #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 | |
| 474 | ||
| 475 | #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c | |
| 476 | #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d | |
| 477 | #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e | |
| 478 | #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f | |
| 479 | ||
| 0787ecc0 MH |
480 | #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 |
| 481 | ||
| 4f1d1b7d MH |
482 | #define CONFIG_SYS_TBIPA_VALUE 8 |
| 483 | #define CONFIG_MII /* MII PHY management */ | |
| 484 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 485 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 486 | #endif | |
| 487 | ||
| 488 | /* | |
| 489 | * Environment | |
| 490 | */ | |
| 491 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 492 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 493 | ||
| 494 | /* | |
| 495 | * Command line configuration. | |
| 496 | */ | |
| 497 | #include <config_cmd_default.h> | |
| 498 | ||
| 499 | #define CONFIG_CMD_DHCP | |
| 500 | #define CONFIG_CMD_ELF | |
| 501 | #define CONFIG_CMD_ERRATA | |
| 502 | #define CONFIG_CMD_GREPENV | |
| 503 | #define CONFIG_CMD_IRQ | |
| 504 | #define CONFIG_CMD_I2C | |
| 505 | #define CONFIG_CMD_MII | |
| 506 | #define CONFIG_CMD_PING | |
| 507 | #define CONFIG_CMD_SETEXPR | |
| 508 | ||
| 509 | #ifdef CONFIG_PCI | |
| 510 | #define CONFIG_CMD_PCI | |
| 511 | #define CONFIG_CMD_NET | |
| 512 | #endif | |
| 513 | ||
| 514 | /* | |
| 515 | * USB | |
| 516 | */ | |
| 517 | #define CONFIG_CMD_USB | |
| 518 | #define CONFIG_USB_STORAGE | |
| 519 | #define CONFIG_USB_EHCI | |
| 520 | #define CONFIG_USB_EHCI_FSL | |
| 521 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 522 | #define CONFIG_CMD_EXT2 | |
| 523 | ||
| 524 | #define CONFIG_MMC | |
| 525 | ||
| 526 | #ifdef CONFIG_MMC | |
| 527 | #define CONFIG_FSL_ESDHC | |
| 528 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 529 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
| 530 | #define CONFIG_CMD_MMC | |
| 531 | #define CONFIG_GENERIC_MMC | |
| 532 | #define CONFIG_CMD_EXT2 | |
| 533 | #define CONFIG_CMD_FAT | |
| 534 | #define CONFIG_DOS_PARTITION | |
| 535 | #endif | |
| 536 | ||
| 537 | /* | |
| 538 | * Miscellaneous configurable options | |
| 539 | */ | |
| 540 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 541 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 542 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 543 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 544 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 545 | #ifdef CONFIG_CMD_KGDB | |
| 546 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 547 | #else | |
| 548 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 549 | #endif | |
| 550 | /* Print Buffer Size */ | |
| 551 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
| 552 | sizeof(CONFIG_SYS_PROMPT)+16) | |
| 553 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 554 | /* Boot Argument Buffer Size */ | |
| 555 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 556 | #define CONFIG_SYS_HZ 1000 /* decrementer freq 1ms ticks */ | |
| 557 | ||
| 558 | /* | |
| 559 | * For booting Linux, the board info and command line data | |
| 560 | * have to be in the first 64 MB of memory, since this is | |
| 561 | * the maximum mapped by the Linux kernel during initialization. | |
| 562 | */ | |
| 563 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ | |
| 564 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 565 | ||
| 566 | #ifdef CONFIG_CMD_KGDB | |
| 567 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 568 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 569 | #endif | |
| 570 | ||
| 571 | /* | |
| 572 | * Environment Configuration | |
| 573 | */ | |
| 574 | #define CONFIG_ROOTPATH /opt/nfsroot | |
| 575 | #define CONFIG_BOOTFILE uImage | |
| 576 | #define CONFIG_UBOOTPATH u-boot.bin | |
| 577 | ||
| 578 | /* default location for tftp and bootm */ | |
| 579 | #define CONFIG_LOADADDR 1000000 | |
| 580 | ||
| 581 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 582 | ||
| 583 | #define CONFIG_BAUDRATE 115200 | |
| 584 | ||
| 585 | #define __USB_PHY_TYPE utmi | |
| 586 | ||
| 587 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 588 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ | |
| 589 | "bank_intlv=cs0_cs1\0" \ | |
| 590 | "netdev=eth0\0" \ | |
| 591 | "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ | |
| 592 | "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 593 | "tftpflash=tftpboot $loadaddr $uboot && " \ | |
| 594 | "protect off $ubootaddr +$filesize && " \ | |
| 595 | "erase $ubootaddr +$filesize && " \ | |
| 596 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 597 | "protect on $ubootaddr +$filesize && " \ | |
| 598 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 599 | "consoledev=ttyS0\0" \ | |
| 600 | "usb_phy_type=" MK_STR(__USB_PHY_TYPE) "\0" \ | |
| 601 | "usb_dr_mode=host\0" \ | |
| 602 | "ramdiskaddr=2000000\0" \ | |
| 603 | "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ | |
| 604 | "fdtaddr=c00000\0" \ | |
| 605 | "fdtfile=p2041rdb/p2041rdb.dtb\0" \ | |
| 606 | "bdev=sda3\0" \ | |
| 607 | "c=ffe\0" | |
| 608 | ||
| 609 | #define CONFIG_HDBOOT \ | |
| 610 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 611 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 612 | "tftp $loadaddr $bootfile;" \ | |
| 613 | "tftp $fdtaddr $fdtfile;" \ | |
| 614 | "bootm $loadaddr - $fdtaddr" | |
| 615 | ||
| 616 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 617 | "setenv bootargs root=/dev/nfs rw " \ | |
| 618 | "nfsroot=$serverip:$rootpath " \ | |
| 619 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 620 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 621 | "tftp $loadaddr $bootfile;" \ | |
| 622 | "tftp $fdtaddr $fdtfile;" \ | |
| 623 | "bootm $loadaddr - $fdtaddr" | |
| 624 | ||
| 625 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 626 | "setenv bootargs root=/dev/ram rw " \ | |
| 627 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 628 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 629 | "tftp $loadaddr $bootfile;" \ | |
| 630 | "tftp $fdtaddr $fdtfile;" \ | |
| 631 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 632 | ||
| 633 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT | |
| 634 | ||
| 635 | #ifdef CONFIG_SECURE_BOOT | |
| 636 | #include <asm/fsl_secure_boot.h> | |
| 637 | #endif | |
| 638 | ||
| 639 | #endif /* __CONFIG_H */ |