projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 4f1d1b7d | 1 | /* |
| 3d7506fa | 2 | * Copyright 2011-2012 Freescale Semiconductor, Inc. |
| 4f1d1b7d | 3 | * |
| 1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 4f1d1b7d MH |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * P2041 RDB board configuration file | |
| 3e978f5d | 9 | * Also supports P2040 RDB |
| 4f1d1b7d MH |
10 | */ |
| 11 | #ifndef __CONFIG_H | |
| 12 | #define __CONFIG_H | |
| 13 | ||
| 14 | #define CONFIG_P2041RDB | |
| 15 | #define CONFIG_PHYS_64BIT | |
| 84d13c58 | 16 | #define CONFIG_DISPLAY_BOARDINFO |
| 4f1d1b7d MH |
17 | #define CONFIG_PPC_P2041 |
| 18 | ||
| 19 | #ifdef CONFIG_RAMBOOT_PBL | |
| 20 | #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE | |
| 21 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc | |
| e4536f8e MY |
22 | #define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg |
| 23 | #define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p2041rdb.cfg | |
| 4f1d1b7d MH |
24 | #endif |
| 25 | ||
| 461632bd | 26 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| ff65f126 | 27 | /* Set 1M boot space */ |
| 461632bd LG |
28 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) |
| 29 | #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ | |
| 30 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) | |
| ff65f126 LG |
31 | #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc |
| 32 | #define CONFIG_SYS_NO_FLASH | |
| 33 | #endif | |
| 34 | ||
| 4f1d1b7d MH |
35 | /* High Level Configuration Options */ |
| 36 | #define CONFIG_BOOKE | |
| 37 | #define CONFIG_E500 /* BOOKE e500 family */ | |
| 38 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
| 39 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
| 4f1d1b7d MH |
40 | #define CONFIG_MP /* support multiple processors */ |
| 41 | ||
| 42 | #ifndef CONFIG_SYS_TEXT_BASE | |
| e222b1f3 | 43 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 4f1d1b7d MH |
44 | #endif |
| 45 | ||
| 46 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 47 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 48 | #endif | |
| 49 | ||
| 50 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
| 51 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
| 52 | #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ | |
| 737537ef | 53 | #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ |
| 4f1d1b7d MH |
54 | #define CONFIG_PCI /* Enable PCI/PCIE */ |
| 55 | #define CONFIG_PCIE1 /* PCIE controler 1 */ | |
| 56 | #define CONFIG_PCIE2 /* PCIE controler 2 */ | |
| 57 | #define CONFIG_PCIE3 /* PCIE controler 3 */ | |
| 58 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 59 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 60 | ||
| 61 | #define CONFIG_SYS_SRIO | |
| 62 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
| 63 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
| c8b28152 | 64 | #define CONFIG_SRIO_PCIE_BOOT_MASTER |
| 4d28db8a | 65 | #define CONFIG_SYS_DPAA_RMAN /* RMan */ |
| 4f1d1b7d MH |
66 | |
| 67 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
| 68 | ||
| 69 | #define CONFIG_ENV_OVERWRITE | |
| 70 | ||
| 71 | #ifdef CONFIG_SYS_NO_FLASH | |
| 461632bd | 72 | #if !defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| 4f1d1b7d | 73 | #define CONFIG_ENV_IS_NOWHERE |
| 0f57f6a3 | 74 | #endif |
| 4f1d1b7d MH |
75 | #else |
| 76 | #define CONFIG_FLASH_CFI_DRIVER | |
| 77 | #define CONFIG_SYS_FLASH_CFI | |
| 0f57f6a3 | 78 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| 4f1d1b7d MH |
79 | #endif |
| 80 | ||
| 81 | #if defined(CONFIG_SPIFLASH) | |
| 82 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 83 | #define CONFIG_ENV_IS_IN_SPI_FLASH | |
| 84 | #define CONFIG_ENV_SPI_BUS 0 | |
| 85 | #define CONFIG_ENV_SPI_CS 0 | |
| 86 | #define CONFIG_ENV_SPI_MAX_HZ 10000000 | |
| 87 | #define CONFIG_ENV_SPI_MODE 0 | |
| 88 | #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ | |
| 89 | #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ | |
| 90 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 91 | #elif defined(CONFIG_SDCARD) | |
| 92 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 93 | #define CONFIG_ENV_IS_IN_MMC | |
| 4394d0c2 | 94 | #define CONFIG_FSL_FIXED_MMC_LOCATION |
| 4f1d1b7d MH |
95 | #define CONFIG_SYS_MMC_ENV_DEV 0 |
| 96 | #define CONFIG_ENV_SIZE 0x2000 | |
| e222b1f3 | 97 | #define CONFIG_ENV_OFFSET (512 * 1658) |
| 15c8c6c2 SX |
98 | #elif defined(CONFIG_NAND) |
| 99 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 100 | #define CONFIG_ENV_IS_IN_NAND | |
| 101 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| e222b1f3 | 102 | #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 461632bd | 103 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| ff65f126 LG |
104 | #define CONFIG_ENV_IS_IN_REMOTE |
| 105 | #define CONFIG_ENV_ADDR 0xffe20000 | |
| 106 | #define CONFIG_ENV_SIZE 0x2000 | |
| 0f57f6a3 | 107 | #elif defined(CONFIG_ENV_IS_NOWHERE) |
| ff65f126 | 108 | #define CONFIG_ENV_SIZE 0x2000 |
| 4f1d1b7d MH |
109 | #else |
| 110 | #define CONFIG_ENV_IS_IN_FLASH | |
| 111 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ | |
| 112 | - CONFIG_ENV_SECT_SIZE) | |
| 113 | #define CONFIG_ENV_SIZE 0x2000 | |
| 114 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 115 | #endif | |
| 116 | ||
| 44d50f0b SX |
117 | #ifndef __ASSEMBLY__ |
| 118 | unsigned long get_board_sys_clk(unsigned long dummy); | |
| 119 | #endif | |
| 120 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) | |
| 4f1d1b7d MH |
121 | |
| 122 | /* | |
| 123 | * These can be toggled for performance analysis, otherwise use default. | |
| 124 | */ | |
| 125 | #define CONFIG_SYS_CACHE_STASHING | |
| cd420e0b MH |
126 | #define CONFIG_BACKSIDE_L2_CACHE |
| 127 | #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E | |
| 4f1d1b7d MH |
128 | #define CONFIG_BTB /* toggle branch predition */ |
| 129 | ||
| 130 | #define CONFIG_ENABLE_36BIT_PHYS | |
| 131 | ||
| 132 | #ifdef CONFIG_PHYS_64BIT | |
| 133 | #define CONFIG_ADDR_MAP | |
| 134 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
| 135 | #endif | |
| 136 | ||
| 137 | #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ | |
| 138 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 139 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 140 | #define CONFIG_SYS_ALT_MEMTEST | |
| 141 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 142 | ||
| 143 | /* | |
| 144 | * Config the L3 Cache as L3 SRAM | |
| 145 | */ | |
| 146 | #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE | |
| 147 | #ifdef CONFIG_PHYS_64BIT | |
| 148 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ | |
| 149 | CONFIG_RAMBOOT_TEXT_BASE) | |
| 150 | #else | |
| 151 | #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR | |
| 152 | #endif | |
| 153 | #define CONFIG_SYS_L3_SIZE (1024 << 10) | |
| 154 | #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) | |
| 155 | ||
| 4f1d1b7d MH |
156 | #ifdef CONFIG_PHYS_64BIT |
| 157 | #define CONFIG_SYS_DCSRBAR 0xf0000000 | |
| 158 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
| 159 | #endif | |
| 160 | ||
| 161 | /* EEPROM */ | |
| 162 | #define CONFIG_ID_EEPROM | |
| 163 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 164 | #define CONFIG_SYS_EEPROM_BUS_NUM 0 | |
| 165 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
| 166 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 167 | ||
| 168 | /* | |
| 169 | * DDR Setup | |
| 170 | */ | |
| 171 | #define CONFIG_VERY_BIG_RAM | |
| 172 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 173 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 174 | ||
| 175 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 176 | #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 177 | ||
| 178 | #define CONFIG_DDR_SPD | |
| 5614e71b | 179 | #define CONFIG_SYS_FSL_DDR3 |
| 4f1d1b7d MH |
180 | |
| 181 | #define CONFIG_SYS_SPD_BUS_NUM 0 | |
| 182 | #define SPD_EEPROM_ADDRESS 0x52 | |
| 183 | #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ | |
| 184 | ||
| 185 | /* | |
| 186 | * Local Bus Definitions | |
| 187 | */ | |
| 188 | ||
| 189 | /* Set the local bus clock 1/8 of platform clock */ | |
| 190 | #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 | |
| 191 | ||
| ca1b0b89 YS |
192 | /* |
| 193 | * This board doesn't have a promjet connector. | |
| 194 | * However, it uses commone corenet board LAW and TLB. | |
| 195 | * It is necessary to use the same start address with proper offset. | |
| 196 | */ | |
| 197 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
| 4f1d1b7d | 198 | #ifdef CONFIG_PHYS_64BIT |
| ca1b0b89 | 199 | #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull |
| 4f1d1b7d MH |
200 | #else |
| 201 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 202 | #endif | |
| 203 | ||
| c9b2feaf | 204 | #define CONFIG_SYS_FLASH_BR_PRELIM \ |
| ca1b0b89 YS |
205 | (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | \ |
| 206 | BR_PS_16 | BR_V) | |
| c9b2feaf SX |
207 | #define CONFIG_SYS_FLASH_OR_PRELIM \ |
| 208 | ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ | |
| 209 | | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) | |
| 4f1d1b7d MH |
210 | |
| 211 | #define CONFIG_FSL_CPLD | |
| 212 | #define CPLD_BASE 0xffdf0000 /* CPLD registers */ | |
| 213 | #ifdef CONFIG_PHYS_64BIT | |
| 214 | #define CPLD_BASE_PHYS 0xfffdf0000ull | |
| 215 | #else | |
| 216 | #define CPLD_BASE_PHYS CPLD_BASE | |
| 217 | #endif | |
| 218 | ||
| 219 | #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) | |
| 220 | #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ | |
| 221 | ||
| 222 | #define PIXIS_LBMAP_SWITCH 7 | |
| 223 | #define PIXIS_LBMAP_MASK 0xf0 | |
| 224 | #define PIXIS_LBMAP_SHIFT 4 | |
| 225 | #define PIXIS_LBMAP_ALTBANK 0x40 | |
| 226 | ||
| 227 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 228 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 229 | ||
| 230 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 231 | #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ | |
| 232 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ | |
| 233 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ | |
| 234 | ||
| 235 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE | |
| 236 | ||
| 237 | #if defined(CONFIG_RAMBOOT_PBL) | |
| 238 | #define CONFIG_SYS_RAMBOOT | |
| 239 | #endif | |
| 240 | ||
| c9b2feaf SX |
241 | #define CONFIG_NAND_FSL_ELBC |
| 242 | /* Nand Flash */ | |
| 243 | #ifdef CONFIG_NAND_FSL_ELBC | |
| 244 | #define CONFIG_SYS_NAND_BASE 0xffa00000 | |
| 245 | #ifdef CONFIG_PHYS_64BIT | |
| 246 | #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull | |
| 247 | #else | |
| 248 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE | |
| 249 | #endif | |
| 250 | ||
| 251 | #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} | |
| 252 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| c9b2feaf SX |
253 | #define CONFIG_CMD_NAND |
| 254 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 255 | ||
| 256 | /* NAND flash config */ | |
| 257 | #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | |
| 258 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | |
| 259 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 260 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 261 | | BR_V) /* valid */ | |
| 262 | #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | |
| 263 | | OR_FCM_PGS /* Large Page*/ \ | |
| 264 | | OR_FCM_CSCT \ | |
| 265 | | OR_FCM_CST \ | |
| 266 | | OR_FCM_CHT \ | |
| 267 | | OR_FCM_SCY_1 \ | |
| 268 | | OR_FCM_TRLX \ | |
| 269 | | OR_FCM_EHTR) | |
| 270 | ||
| 271 | #ifdef CONFIG_NAND | |
| 272 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ | |
| 273 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
| 274 | #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 275 | #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ | |
| 276 | #else | |
| 277 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 278 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ | |
| 279 | #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ | |
| 280 | #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ | |
| 281 | #endif | |
| 282 | #else | |
| 283 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 284 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ | |
| 285 | #endif /* CONFIG_NAND_FSL_ELBC */ | |
| 286 | ||
| 4f1d1b7d MH |
287 | #define CONFIG_SYS_FLASH_EMPTY_INFO |
| 288 | #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 | |
| ca1b0b89 | 289 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} |
| 4f1d1b7d MH |
290 | |
| 291 | #define CONFIG_BOARD_EARLY_INIT_F | |
| 292 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 293 | #define CONFIG_MISC_INIT_R | |
| 294 | ||
| 295 | #define CONFIG_HWCONFIG | |
| 296 | ||
| 297 | /* define to use L1 as initial stack */ | |
| 298 | #define CONFIG_L1_INIT_RAM | |
| 299 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 300 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ | |
| 301 | #ifdef CONFIG_PHYS_64BIT | |
| 302 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf | |
| 303 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR | |
| 304 | /* The assembler doesn't like typecast */ | |
| 305 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
| 306 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
| 307 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
| 308 | #else | |
| 309 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR | |
| 310 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 | |
| 311 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 312 | #endif | |
| 313 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 314 | ||
| 315 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 316 | GENERATED_GBL_DATA_SIZE) | |
| 317 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 318 | ||
| 9307cbab | 319 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 4f1d1b7d MH |
320 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) |
| 321 | ||
| 322 | /* Serial Port - controlled on board with jumper J8 | |
| 323 | * open - index 2 | |
| 324 | * shorted - index 1 | |
| 325 | */ | |
| 326 | #define CONFIG_CONS_INDEX 1 | |
| 4f1d1b7d MH |
327 | #define CONFIG_SYS_NS16550_SERIAL |
| 328 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 329 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
| 330 | ||
| 331 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 332 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 333 | ||
| 334 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
| 335 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
| 336 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
| 337 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
| 338 | ||
| 339 | /* Use the HUSH parser */ | |
| 340 | #define CONFIG_SYS_HUSH_PARSER | |
| 4f1d1b7d | 341 | |
| 4f1d1b7d | 342 | /* I2C */ |
| 00f792e0 HS |
343 | #define CONFIG_SYS_I2C |
| 344 | #define CONFIG_SYS_I2C_FSL | |
| 345 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 | |
| 346 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 2bd1aab0 | 347 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 |
| 00f792e0 HS |
348 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 |
| 349 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 2bd1aab0 | 350 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 |
| 4f1d1b7d MH |
351 | |
| 352 | /* | |
| 353 | * RapidIO | |
| 354 | */ | |
| 355 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
| 356 | #ifdef CONFIG_PHYS_64BIT | |
| 357 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull | |
| 358 | #else | |
| 359 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 | |
| 360 | #endif | |
| 361 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ | |
| 362 | ||
| 363 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
| 364 | #ifdef CONFIG_PHYS_64BIT | |
| 365 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull | |
| 366 | #else | |
| 367 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 | |
| 368 | #endif | |
| 369 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ | |
| 370 | ||
| ff65f126 LG |
371 | /* |
| 372 | * for slave u-boot IMAGE instored in master memory space, | |
| 373 | * PHYS must be aligned based on the SIZE | |
| 374 | */ | |
| e4911815 LG |
375 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull |
| 376 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull | |
| 377 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ | |
| 378 | #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull | |
| ff65f126 LG |
379 | /* |
| 380 | * for slave UCODE and ENV instored in master memory space, | |
| 381 | * PHYS must be aligned based on the SIZE | |
| 382 | */ | |
| e4911815 | 383 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull |
| b5f7c873 LG |
384 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull |
| 385 | #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ | |
| ff65f126 LG |
386 | |
| 387 | /* slave core release by master*/ | |
| b5f7c873 LG |
388 | #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 |
| 389 | #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ | |
| ff65f126 LG |
390 | |
| 391 | /* | |
| 461632bd | 392 | * SRIO_PCIE_BOOT - SLAVE |
| ff65f126 | 393 | */ |
| 461632bd LG |
394 | #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE |
| 395 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 | |
| 396 | #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ | |
| 397 | (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) | |
| ff65f126 LG |
398 | #endif |
| 399 | ||
| 4f1d1b7d MH |
400 | /* |
| 401 | * eSPI - Enhanced SPI | |
| 402 | */ | |
| 4f1d1b7d MH |
403 | #define CONFIG_CMD_SF |
| 404 | #define CONFIG_SF_DEFAULT_SPEED 10000000 | |
| 405 | #define CONFIG_SF_DEFAULT_MODE 0 | |
| 406 | ||
| 407 | /* | |
| 408 | * General PCI | |
| 409 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 410 | */ | |
| 411 | ||
| 412 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
| 413 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 414 | #ifdef CONFIG_PHYS_64BIT | |
| 415 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 | |
| 416 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
| 417 | #else | |
| 418 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 419 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 420 | #endif | |
| 421 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 422 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
| 423 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 424 | #ifdef CONFIG_PHYS_64BIT | |
| 425 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull | |
| 426 | #else | |
| 427 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 | |
| 428 | #endif | |
| 429 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 430 | ||
| 431 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
| 432 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
| 433 | #ifdef CONFIG_PHYS_64BIT | |
| 434 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 | |
| 435 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
| 436 | #else | |
| 437 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 | |
| 438 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 | |
| 439 | #endif | |
| 440 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 441 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
| 442 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 443 | #ifdef CONFIG_PHYS_64BIT | |
| 444 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull | |
| 445 | #else | |
| 446 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 | |
| 447 | #endif | |
| 448 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 449 | ||
| 450 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
| 451 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 | |
| 452 | #ifdef CONFIG_PHYS_64BIT | |
| 453 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 | |
| 454 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull | |
| 455 | #else | |
| 456 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 | |
| 457 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 | |
| 458 | #endif | |
| 459 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ | |
| 460 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
| 461 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
| 462 | #ifdef CONFIG_PHYS_64BIT | |
| 463 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull | |
| 464 | #else | |
| 465 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 | |
| 466 | #endif | |
| 467 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ | |
| 468 | ||
| 469 | /* Qman/Bman */ | |
| 470 | #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ | |
| 471 | #define CONFIG_SYS_BMAN_NUM_PORTALS 10 | |
| 472 | #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 | |
| 473 | #ifdef CONFIG_PHYS_64BIT | |
| 474 | #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull | |
| 475 | #else | |
| 476 | #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE | |
| 477 | #endif | |
| 478 | #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 | |
| 3fa66db4 JL |
479 | #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 |
| 480 | #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 | |
| 481 | #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE | |
| 482 | #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 483 | #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ | |
| 484 | CONFIG_SYS_BMAN_CENA_SIZE) | |
| 485 | #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) | |
| 486 | #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 | |
| 4f1d1b7d MH |
487 | #define CONFIG_SYS_QMAN_NUM_PORTALS 10 |
| 488 | #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 | |
| 489 | #ifdef CONFIG_PHYS_64BIT | |
| 490 | #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull | |
| 491 | #else | |
| 492 | #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE | |
| 493 | #endif | |
| 494 | #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 | |
| 3fa66db4 JL |
495 | #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 |
| 496 | #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 | |
| 497 | #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE | |
| 498 | #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 499 | #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ | |
| 500 | CONFIG_SYS_QMAN_CENA_SIZE) | |
| 501 | #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) | |
| 502 | #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 | |
| 4f1d1b7d MH |
503 | |
| 504 | #define CONFIG_SYS_DPAA_FMAN | |
| 505 | #define CONFIG_SYS_DPAA_PME | |
| 506 | /* Default address of microcode for the Linux Fman driver */ | |
| 4f1d1b7d MH |
507 | #if defined(CONFIG_SPIFLASH) |
| 508 | /* | |
| 509 | * env is stored at 0x100000, sector size is 0x10000, ucode is stored after | |
| 510 | * env, so we got 0x110000. | |
| 511 | */ | |
| f2717b47 | 512 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH |
| dcf1d774 | 513 | #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 |
| 4f1d1b7d MH |
514 | #elif defined(CONFIG_SDCARD) |
| 515 | /* | |
| 516 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
| e222b1f3 PK |
517 | * about 825KB (1650 blocks), Env is stored after the image, and the env size is |
| 518 | * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. | |
| 4f1d1b7d | 519 | */ |
| f2717b47 | 520 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC |
| dcf1d774 | 521 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) |
| 4f1d1b7d | 522 | #elif defined(CONFIG_NAND) |
| f2717b47 | 523 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND |
| dcf1d774 | 524 | #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) |
| 461632bd | 525 | #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) |
| ff65f126 LG |
526 | /* |
| 527 | * Slave has no ucode locally, it can fetch this from remote. When implementing | |
| 528 | * in two corenet boards, slave's ucode could be stored in master's memory | |
| 529 | * space, the address can be mapped from slave TLB->slave LAW-> | |
| 461632bd LG |
530 | * slave SRIO or PCIE outbound window->master inbound window-> |
| 531 | * master LAW->the ucode address in master's memory space. | |
| ff65f126 LG |
532 | */ |
| 533 | #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE | |
| dcf1d774 | 534 | #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 |
| 4f1d1b7d | 535 | #else |
| f2717b47 | 536 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR |
| dcf1d774 | 537 | #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 |
| 4f1d1b7d | 538 | #endif |
| f2717b47 TT |
539 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
| 540 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
| 4f1d1b7d MH |
541 | |
| 542 | #ifdef CONFIG_SYS_DPAA_FMAN | |
| 543 | #define CONFIG_FMAN_ENET | |
| 0787ecc0 MH |
544 | #define CONFIG_PHYLIB_10G |
| 545 | #define CONFIG_PHY_VITESSE | |
| 546 | #define CONFIG_PHY_TERANETICS | |
| 4f1d1b7d MH |
547 | #endif |
| 548 | ||
| 549 | #ifdef CONFIG_PCI | |
| 842033e6 | 550 | #define CONFIG_PCI_INDIRECT_BRIDGE |
| 4f1d1b7d | 551 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| 4f1d1b7d MH |
552 | |
| 553 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 554 | #define CONFIG_DOS_PARTITION | |
| 555 | #endif /* CONFIG_PCI */ | |
| 556 | ||
| aa7f281c | 557 | /* SATA */ |
| 9760b274 ZRR |
558 | #define CONFIG_FSL_SATA_V2 |
| 559 | ||
| 560 | #ifdef CONFIG_FSL_SATA_V2 | |
| aa7f281c | 561 | #define CONFIG_FSL_SATA |
| 3e0529f7 | 562 | #define CONFIG_LIBATA |
| aa7f281c MH |
563 | |
| 564 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 565 | #define CONFIG_SATA1 | |
| 566 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
| 567 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
| 568 | #define CONFIG_SATA2 | |
| 569 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
| 570 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
| 571 | ||
| 572 | #define CONFIG_LBA48 | |
| 573 | #define CONFIG_CMD_SATA | |
| 574 | #define CONFIG_DOS_PARTITION | |
| 575 | #define CONFIG_CMD_EXT2 | |
| 576 | #endif | |
| 577 | ||
| 4f1d1b7d MH |
578 | #ifdef CONFIG_FMAN_ENET |
| 579 | #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 | |
| 580 | #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 | |
| 581 | #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 | |
| 582 | #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 | |
| 583 | #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 | |
| 584 | ||
| 585 | #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c | |
| 586 | #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d | |
| 587 | #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e | |
| 588 | #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f | |
| 589 | ||
| 0787ecc0 MH |
590 | #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 |
| 591 | ||
| 4f1d1b7d MH |
592 | #define CONFIG_SYS_TBIPA_VALUE 8 |
| 593 | #define CONFIG_MII /* MII PHY management */ | |
| 594 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
| 595 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
| 596 | #endif | |
| 597 | ||
| 598 | /* | |
| 599 | * Environment | |
| 600 | */ | |
| 601 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 602 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 603 | ||
| 604 | /* | |
| 605 | * Command line configuration. | |
| 606 | */ | |
| 4f1d1b7d | 607 | #define CONFIG_CMD_DHCP |
| 4f1d1b7d MH |
608 | #define CONFIG_CMD_ERRATA |
| 609 | #define CONFIG_CMD_GREPENV | |
| 610 | #define CONFIG_CMD_IRQ | |
| 611 | #define CONFIG_CMD_I2C | |
| 612 | #define CONFIG_CMD_MII | |
| 613 | #define CONFIG_CMD_PING | |
| 4f1d1b7d MH |
614 | |
| 615 | #ifdef CONFIG_PCI | |
| 616 | #define CONFIG_CMD_PCI | |
| 4f1d1b7d MH |
617 | #endif |
| 618 | ||
| 619 | /* | |
| 620 | * USB | |
| 621 | */ | |
| 3d7506fa | 622 | #define CONFIG_HAS_FSL_DR_USB |
| 623 | #define CONFIG_HAS_FSL_MPH_USB | |
| 624 | ||
| 625 | #if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) | |
| 4f1d1b7d MH |
626 | #define CONFIG_CMD_USB |
| 627 | #define CONFIG_USB_STORAGE | |
| 628 | #define CONFIG_USB_EHCI | |
| 629 | #define CONFIG_USB_EHCI_FSL | |
| 630 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 3d7506fa | 631 | #endif |
| 632 | ||
| 4f1d1b7d MH |
633 | #define CONFIG_CMD_EXT2 |
| 634 | ||
| 635 | #define CONFIG_MMC | |
| 636 | ||
| 637 | #ifdef CONFIG_MMC | |
| 638 | #define CONFIG_FSL_ESDHC | |
| 639 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 640 | #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT | |
| 641 | #define CONFIG_CMD_MMC | |
| 642 | #define CONFIG_GENERIC_MMC | |
| 643 | #define CONFIG_CMD_EXT2 | |
| 644 | #define CONFIG_CMD_FAT | |
| 645 | #define CONFIG_DOS_PARTITION | |
| 646 | #endif | |
| 647 | ||
| 737537ef RG |
648 | /* Hash command with SHA acceleration supported in hardware */ |
| 649 | #ifdef CONFIG_FSL_CAAM | |
| 650 | #define CONFIG_CMD_HASH | |
| 651 | #define CONFIG_SHA_HW_ACCEL | |
| 652 | #endif | |
| 653 | ||
| 4f1d1b7d MH |
654 | /* |
| 655 | * Miscellaneous configurable options | |
| 656 | */ | |
| 657 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 658 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 659 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 660 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 4f1d1b7d MH |
661 | #ifdef CONFIG_CMD_KGDB |
| 662 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 663 | #else | |
| 664 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 665 | #endif | |
| 666 | /* Print Buffer Size */ | |
| 667 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
| 668 | sizeof(CONFIG_SYS_PROMPT)+16) | |
| 669 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 670 | /* Boot Argument Buffer Size */ | |
| 671 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 4f1d1b7d MH |
672 | |
| 673 | /* | |
| 674 | * For booting Linux, the board info and command line data | |
| 675 | * have to be in the first 64 MB of memory, since this is | |
| 676 | * the maximum mapped by the Linux kernel during initialization. | |
| 677 | */ | |
| 678 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ | |
| 679 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 680 | ||
| 681 | #ifdef CONFIG_CMD_KGDB | |
| 682 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 4f1d1b7d MH |
683 | #endif |
| 684 | ||
| 685 | /* | |
| 686 | * Environment Configuration | |
| 687 | */ | |
| 8b3637c6 | 688 | #define CONFIG_ROOTPATH "/opt/nfsroot" |
| b3f44c21 | 689 | #define CONFIG_BOOTFILE "uImage" |
| 4f1d1b7d MH |
690 | #define CONFIG_UBOOTPATH u-boot.bin |
| 691 | ||
| 692 | /* default location for tftp and bootm */ | |
| 693 | #define CONFIG_LOADADDR 1000000 | |
| 694 | ||
| 695 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 696 | ||
| 697 | #define CONFIG_BAUDRATE 115200 | |
| 698 | ||
| 699 | #define __USB_PHY_TYPE utmi | |
| 700 | ||
| 701 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 702 | "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ | |
| 703 | "bank_intlv=cs0_cs1\0" \ | |
| 704 | "netdev=eth0\0" \ | |
| 5368c55d MV |
705 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ |
| 706 | "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ | |
| 4f1d1b7d MH |
707 | "tftpflash=tftpboot $loadaddr $uboot && " \ |
| 708 | "protect off $ubootaddr +$filesize && " \ | |
| 709 | "erase $ubootaddr +$filesize && " \ | |
| 710 | "cp.b $loadaddr $ubootaddr $filesize && " \ | |
| 711 | "protect on $ubootaddr +$filesize && " \ | |
| 712 | "cmp.b $loadaddr $ubootaddr $filesize\0" \ | |
| 713 | "consoledev=ttyS0\0" \ | |
| 5368c55d | 714 | "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ |
| 4f1d1b7d MH |
715 | "usb_dr_mode=host\0" \ |
| 716 | "ramdiskaddr=2000000\0" \ | |
| 717 | "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ | |
| 718 | "fdtaddr=c00000\0" \ | |
| 719 | "fdtfile=p2041rdb/p2041rdb.dtb\0" \ | |
| 3246584d | 720 | "bdev=sda3\0" |
| 4f1d1b7d MH |
721 | |
| 722 | #define CONFIG_HDBOOT \ | |
| 723 | "setenv bootargs root=/dev/$bdev rw " \ | |
| 724 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 725 | "tftp $loadaddr $bootfile;" \ | |
| 726 | "tftp $fdtaddr $fdtfile;" \ | |
| 727 | "bootm $loadaddr - $fdtaddr" | |
| 728 | ||
| 729 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 730 | "setenv bootargs root=/dev/nfs rw " \ | |
| 731 | "nfsroot=$serverip:$rootpath " \ | |
| 732 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 733 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 734 | "tftp $loadaddr $bootfile;" \ | |
| 735 | "tftp $fdtaddr $fdtfile;" \ | |
| 736 | "bootm $loadaddr - $fdtaddr" | |
| 737 | ||
| 738 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 739 | "setenv bootargs root=/dev/ram rw " \ | |
| 740 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 741 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 742 | "tftp $loadaddr $bootfile;" \ | |
| 743 | "tftp $fdtaddr $fdtfile;" \ | |
| 744 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 745 | ||
| 746 | #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT | |
| 747 | ||
| 4f1d1b7d | 748 | #include <asm/fsl_secure_boot.h> |
| 4f1d1b7d MH |
749 | |
| 750 | #endif /* __CONFIG_H */ |