[people/ms/u-boot.git] / include / configs / RBC823.h

/*
 * (C) Copyright 2000, 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * Modified by Udi Finkelstein udif@udif.com
 * For the RBC823 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC823		1	/* This is a MPC823 CPU		*/
#define CONFIG_RBC823		1	/* ...on a RBC823 module	*/


#if 0
#define DEBUG			1
#define CONFIG_LAST_STAGE_INIT
#endif
#define CONFIG_KEYBOARD		1	/* This board has a custom keybpard */
#define CONFIG_LCD		1	/* use LCD controller ...	*/
#define CONFIG_HITACHI_SP19X001_Z1A	/* The LCD type we use */

#define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
#undef	CONFIG_8xx_CONS_SMC1
#undef	CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
#if 1
#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
#else
#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
#endif

#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
#define CONFIG_8xx_GCLK_FREQ    48000000L

#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"

#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND							\
	"bootp; "								\
	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
	"bootm"

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/

#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/

#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/

#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE


#undef CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION

#undef	CONFIG_RTC_MPC8xx		/* don't use internal RTC of MPC8xx (no battery)	*/

#define CONFIG_HARD_I2C
#define CONFIG_SYS_I2C_SPEED 40000
#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
#define CONFIG_SYS_EEPROM_WRITE_BITS		4
#define CONFIG_SYS_EEPROM_WRITE_DELAY_MS	10

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_BEDBUG
#define CONFIG_CMD_BMP
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_CDP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DOC
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_KGDB
#define CONFIG_CMD_PING
#define CONFIG_CMD_PORTIO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SDRAM

#undef CONFIG_CMD_SETGETDCR
#undef CONFIG_CMD_XIMG

/*
 * Miscellaneous configurable options
 */
#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/

#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/

#define	CONFIG_SYS_LOAD_ADDR		0x0100000	/* default load address	*/

#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/*
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
/*-----------------------------------------------------------------------
 * Internal Memory Mapped Register
 */
#define CONFIG_SYS_IMMR		0xFF000000

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area (in DPRAM)
 */
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
#define	CONFIG_SYS_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
#define	CONFIG_SYS_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define	CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_FLASH_BASE		0xFFF00000
#if defined(DEBUG)
#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 256 kB for Monitor	*/
#else
#define	CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 192 kB for Monitor	*/
#endif
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/

#define	CONFIG_ENV_IS_IN_FLASH	1
#define	CONFIG_ENV_OFFSET		0x10000	/*   Offset   of Environment Sector	*/
#define	CONFIG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
#endif

/*-----------------------------------------------------------------------
 * SYPCR - System Protection Control				11-9
 * SYPCR can only be written once after reset!
 *-----------------------------------------------------------------------
 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 */
#if defined(CONFIG_WATCHDOG)
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
#else
/*
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
*/
#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWRI | SYPCR_SWP)
#endif

/*-----------------------------------------------------------------------
 * SIUMCR - SIU Module Configuration				11-6
 *-----------------------------------------------------------------------
 * PCMCIA config., multi-function pin tri-state
 */
#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_FRC)

/*-----------------------------------------------------------------------
 * TBSCR - Time Base Status and Control				11-26
 *-----------------------------------------------------------------------
 * Clear Reference Interrupt Status, Timebase freezing enabled
 */
#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)

/*-----------------------------------------------------------------------
 * RTCSC - Real-Time Clock Status and Control Register		11-27
 *-----------------------------------------------------------------------
 */
#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)

/*-----------------------------------------------------------------------
 * PISCR - Periodic Interrupt Status and Control		11-31
 *-----------------------------------------------------------------------
 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 */
#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)

/*-----------------------------------------------------------------------
 * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
 *-----------------------------------------------------------------------
 * Reset PLL lock status sticky bit, timer expired status bit and timer
 * interrupt status bit
 *
 */

/*
 * for 48 MHz, we use a 4 MHz clock * 12
 */
#define CONFIG_SYS_PLPRCR							\
		( (12-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_LOLRE )

/*-----------------------------------------------------------------------
 * SCCR - System Clock and reset Control Register		15-27
 *-----------------------------------------------------------------------
 * Set clock output, timebase and RTC source and divider,
 * power management and some other internal clocks
 */
#define SCCR_MASK	SCCR_EBDF11
#define CONFIG_SYS_SCCR	(SCCR_RTDIV   | SCCR_RTSEL    | SCCR_CRQEN    | \
		         SCCR_PRQEN   | SCCR_EBDF00   | \
		         SCCR_COM01   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD001 | \
			 SCCR_DFALCD00)

#ifdef NOT_USED
/*-----------------------------------------------------------------------
 * PCMCIA stuff
 *-----------------------------------------------------------------------
 *
 */
#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )

/*-----------------------------------------------------------------------
 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 *-----------------------------------------------------------------------
 */

#define	CONFIG_IDE_PCCARD	1	/* Use IDE with PC Card	Adapter	*/

#undef	CONFIG_IDE_PCMCIA		/* Direct IDE    not supported	*/
#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/

#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/

#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000

#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR

/* Offset for data I/O			*/
#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)

/* Offset for normal register accesses	*/
#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)

/* Offset for alternate registers	*/
#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100

#endif

/************************************************************
 * Disk-On-Chip configuration
 ************************************************************/
#define CONFIG_SYS_MAX_DOC_DEVICE	1	/* Max number of DOC devices		*/
#define CONFIG_SYS_DOC_SHORT_TIMEOUT
#define CONFIG_SYS_DOC_SUPPORT_2000
#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM

/*-----------------------------------------------------------------------
 *
 *-----------------------------------------------------------------------
 *
 */
/*#define	CONFIG_SYS_DER	0x2002000F*/
#define CONFIG_SYS_DER	0

/*
 * Init Memory Controller:
 *
 * BR0/1 and OR0/1 (FLASH)
 */

#define FLASH_BASE0_PRELIM	0xFFF00000	/* FLASH bank #0	*/
#define FLASH_BASE1_PRELIM	0x04000000	/* D.O.C Millenium	*/

/* used to re-map FLASH both when starting from SRAM or FLASH:
 * restrict access enough to keep SRAM working (if any)
 * but not too much to meddle with FLASH accesses
 */
#define CONFIG_SYS_PRELIM_OR_AM	0xFFF80000	/* OR addr mask */

/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1	*/
#define CONFIG_SYS_OR_TIMING_FLASH  (OR_ACS_DIV1 | OR_BI | OR_SCY_7_CLK | OR_EHTR)

#define CONFIG_SYS_OR_TIMING_MSYS   (OR_ACS_DIV1 | OR_BI)

#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)

#define CONFIG_SYS_OR1_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_MSYS)
#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | \
		          BR_PS_8 | BR_V)

/*
 * BR4 and OR4 (SDRAM)
 *
 */
#define SDRAM_BASE4_PRELIM	0x00000000	/* SDRAM bank #0	*/
#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/

/*
 * SDRAM timing:
 */
#define CONFIG_SYS_OR_TIMING_SDRAM	(OR_CSNT_SAM)

#define CONFIG_SYS_OR4_PRELIM	(~(SDRAM_MAX_SIZE-1) | CONFIG_SYS_OR_TIMING_SDRAM )
#define CONFIG_SYS_BR4_PRELIM	((SDRAM_BASE4_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )

/*
 * Memory Periodic Timer Prescaler
 */

/* periodic timer for refresh */
#define CONFIG_SYS_MAMR_PTA	187		/* start with divider for 48 MHz	*/

/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/

/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/

/*
 * MAMR settings for SDRAM
 */

/* 8 column SDRAM */
#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
/* 9 column SDRAM */
#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)


/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM	0x02		/* Software reboot			*/

/*
 * JFFS2 partitions
 *
 */
/* No command line, one static partition, whole device */
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV		"nor0"
#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET	0x00000000

/* mtdparts command line support */
/* Note: fake mtd_id used, no linux mtd map file */
/*
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT		""
#define MTDPARTS_DEFAULT	""
*/

#endif	/* __CONFIG_H */
Commit	Line	Data
682011ff WD	1	/*
	2	* (C) Copyright 2000, 2001
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* Modified by Udi Finkelstein udif@udif.com
	6	* For the RBC823 board.
	7	*
	8	* See file CREDITS for list of people who contributed to this
	9	* project.
	10	*
	11	* This program is free software; you can redistribute it and/or
	12	* modify it under the terms of the GNU General Public License as
	13	* published by the Free Software Foundation; either version 2 of
	14	* the License, or (at your option) any later version.
	15	*
	16	* This program is distributed in the hope that it will be useful,
	17	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	18	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	19	* GNU General Public License for more details.
	20	*
	21	* You should have received a copy of the GNU General Public License
	22	* along with this program; if not, write to the Free Software
	23	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	24	* MA 02111-1307 USA
	25	*/
	26
	27	/*
	28	* board/config.h - configuration options, board specific
	29	*/
	30
	31	#ifndef __CONFIG_H
	32	#define __CONFIG_H
	33
	34	/*
	35	* High Level Configuration Options
	36	* (easy to change)
	37	*/
	38
	39	#define CONFIG_MPC823 1 /* This is a MPC823 CPU */
	40	#define CONFIG_RBC823 1 /* ...on a RBC823 module */
	41
	42
	43	#if 0
	44	#define DEBUG 1
	45	#define CONFIG_LAST_STAGE_INIT
	46	#endif
	47	#define CONFIG_KEYBOARD 1 /* This board has a custom keybpard */
	48	#define CONFIG_LCD 1 /* use LCD controller ... */
	49	#define CONFIG_HITACHI_SP19X001_Z1A /* The LCD type we use */
	50
	51	#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
	52	#undef CONFIG_8xx_CONS_SMC1
	53	#undef CONFIG_8xx_CONS_NONE
	54	#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
	55	#if 1
	56	#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
	57	#else
	58	#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
	59	#endif
	60
	61	#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
	62	#define CONFIG_8xx_GCLK_FREQ 48000000L
	63
32bf3d14	64	#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
682011ff WD	65
	66	#undef CONFIG_BOOTARGS
	67	#define CONFIG_BOOTCOMMAND \
53677ef1 WD	68	"bootp; " \
	69	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
	70	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
682011ff WD	71	"bootm"
	72
	73	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	74	#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
682011ff WD	75
	76	#undef CONFIG_WATCHDOG /* watchdog disabled */
	77
	78	#define CONFIG_STATUS_LED 1 /* Status LED enabled */
	79
	80	#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
	81
18225e8d JL	82	/*
	83	* BOOTP options
	84	*/
	85	#define CONFIG_BOOTP_SUBNETMASK
	86	#define CONFIG_BOOTP_GATEWAY
	87	#define CONFIG_BOOTP_HOSTNAME
	88	#define CONFIG_BOOTP_BOOTPATH
	89	#define CONFIG_BOOTP_BOOTFILESIZE
	90
682011ff WD	91
	92	#undef CONFIG_MAC_PARTITION
	93	#define CONFIG_DOS_PARTITION
	94
	95	#undef CONFIG_RTC_MPC8xx /* don't use internal RTC of MPC8xx (no battery) */
	96
	97	#define CONFIG_HARD_I2C
6d0f6bcf JCPV	98	#define CONFIG_SYS_I2C_SPEED 40000
	99	#define CONFIG_SYS_I2C_SLAVE 0xfe
	100	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	101	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	102	#define CONFIG_SYS_EEPROM_WRITE_BITS 4
	103	#define CONFIG_SYS_EEPROM_WRITE_DELAY_MS 10
682011ff	104
e9a0f8f1 JL	105	/*
	106	* Command line configuration.
	107	*/
4e620410 JCPV	108	#include <config_cmd_default.h>
	109
	110	#define CONFIG_CMD_ASKENV
	111	#define CONFIG_CMD_BEDBUG
	112	#define CONFIG_CMD_BMP
	113	#define CONFIG_CMD_CACHE
	114	#define CONFIG_CMD_CDP
	115	#define CONFIG_CMD_DHCP
	116	#define CONFIG_CMD_DIAG
	117	#define CONFIG_CMD_DOC
	118	#define CONFIG_CMD_EEPROM
	119	#define CONFIG_CMD_ELF
	120	#define CONFIG_CMD_FAT
	121	#define CONFIG_CMD_I2C
	122	#define CONFIG_CMD_IMMAP
	123	#define CONFIG_CMD_KGDB
	124	#define CONFIG_CMD_PING
	125	#define CONFIG_CMD_PORTIO
	126	#define CONFIG_CMD_REGINFO
	127	#define CONFIG_CMD_SAVES
	128	#define CONFIG_CMD_SDRAM
	129
e9a0f8f1	130	#undef CONFIG_CMD_SETGETDCR
e9a0f8f1 JL	131	#undef CONFIG_CMD_XIMG
e9a0f8f1 JL	132
682011ff WD	133	/*
	134	* Miscellaneous configurable options
	135	*/
6d0f6bcf JCPV	136	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	137	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
e9a0f8f1	138	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	139	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
682011ff	140	#else
6d0f6bcf	141	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
682011ff	142	#endif
6d0f6bcf JCPV	143	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	144	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	145	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
682011ff	146
6d0f6bcf JCPV	147	#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
6d0f6bcf JCPV	148	#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
682011ff	149
6d0f6bcf	150	#define CONFIG_SYS_LOAD_ADDR 0x0100000 /* default load address */
682011ff	151
6d0f6bcf	152	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
682011ff	153
6d0f6bcf	154	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
682011ff WD	155
	156	/*
	157	* Low Level Configuration Settings
	158	* (address mappings, register initial values, etc.)
	159	* You should know what you are doing if you make changes here.
	160	*/
	161	/*-----------------------------------------------------------------------
	162	* Internal Memory Mapped Register
	163	*/
6d0f6bcf	164	#define CONFIG_SYS_IMMR 0xFF000000
682011ff WD	165
	166	/*-----------------------------------------------------------------------
	167	* Definitions for initial stack pointer and data area (in DPRAM)
	168	*/
6d0f6bcf JCPV	169	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
	170	#define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
	171	#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
	172	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	173	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
682011ff WD	174
	175	/*-----------------------------------------------------------------------
	176	* Start addresses for the final memory configuration
	177	* (Set up by the startup code)
6d0f6bcf	178	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
682011ff	179	*/
6d0f6bcf JCPV	180	#define CONFIG_SYS_SDRAM_BASE 0x00000000
6d0f6bcf JCPV	181	#define CONFIG_SYS_FLASH_BASE 0xFFF00000
682011ff	182	#if defined(DEBUG)
6d0f6bcf	183	#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 256 kB for Monitor */
682011ff	184	#else
6d0f6bcf	185	#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */
682011ff	186	#endif
6d0f6bcf JCPV	187	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
6d0f6bcf JCPV	188	#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
682011ff WD	189
	190	/*
	191	* For booting Linux, the board info and command line data
	192	* have to be in the first 8 MB of memory, since this is
	193	* the maximum mapped by the Linux kernel during initialization.
	194	*/
6d0f6bcf	195	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
682011ff WD	196
	197	/*-----------------------------------------------------------------------
	198	* FLASH organization
	199	*/
6d0f6bcf JCPV	200	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	201	#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
682011ff	202
6d0f6bcf JCPV	203	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	204	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
682011ff	205
5a1aceb0	206	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	207	#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
0e8d1586 JCPV	208	#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
682011ff WD	209
	210	/*-----------------------------------------------------------------------
	211	* Cache Configuration
	212	*/
6d0f6bcf	213	#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
e9a0f8f1	214	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	215	#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
682011ff WD	216	#endif
	217
	218	/*-----------------------------------------------------------------------
	219	* SYPCR - System Protection Control 11-9
	220	* SYPCR can only be written once after reset!
	221	*-----------------------------------------------------------------------
	222	* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
	223	*/
	224	#if defined(CONFIG_WATCHDOG)
6d0f6bcf	225	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| \
682011ff WD	226	SYPCR_SWE \| SYPCR_SWRI\| SYPCR_SWP)
	227	#else
	228	/*
6d0f6bcf	229	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWF \| SYPCR_SWP)
682011ff	230	*/
6d0f6bcf	231	#define CONFIG_SYS_SYPCR (SYPCR_SWTC \| SYPCR_BMT \| SYPCR_BME \| SYPCR_SWRI \| SYPCR_SWP)
682011ff WD	232	#endif
	233
	234	/*-----------------------------------------------------------------------
	235	* SIUMCR - SIU Module Configuration 11-6
	236	*-----------------------------------------------------------------------
	237	* PCMCIA config., multi-function pin tri-state
	238	*/
6d0f6bcf	239	#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 \| SIUMCR_DBPC00 \| SIUMCR_MLRC00 \| SIUMCR_FRC)
682011ff WD	240
	241	/*-----------------------------------------------------------------------
	242	* TBSCR - Time Base Status and Control 11-26
	243	*-----------------------------------------------------------------------
	244	* Clear Reference Interrupt Status, Timebase freezing enabled
	245	*/
6d0f6bcf	246	#define CONFIG_SYS_TBSCR (TBSCR_REFA \| TBSCR_REFB \| TBSCR_TBF)
682011ff WD	247
	248	/*-----------------------------------------------------------------------
	249	* RTCSC - Real-Time Clock Status and Control Register 11-27
	250	*-----------------------------------------------------------------------
	251	*/
6d0f6bcf	252	#define CONFIG_SYS_RTCSC (RTCSC_SEC \| RTCSC_ALR \| RTCSC_RTF\| RTCSC_RTE)
682011ff WD	253
	254	/*-----------------------------------------------------------------------
	255	* PISCR - Periodic Interrupt Status and Control 11-31
	256	*-----------------------------------------------------------------------
	257	* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
	258	*/
6d0f6bcf	259	#define CONFIG_SYS_PISCR (PISCR_PS \| PISCR_PITF)
682011ff WD	260
	261	/*-----------------------------------------------------------------------
	262	* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
	263	*-----------------------------------------------------------------------
	264	* Reset PLL lock status sticky bit, timer expired status bit and timer
	265	* interrupt status bit
	266	*
	267	*/
	268
	269	/*
	270	* for 48 MHz, we use a 4 MHz clock * 12
	271	*/
6d0f6bcf	272	#define CONFIG_SYS_PLPRCR \
682011ff WD	273	( (12-1)<<PLPRCR_MF_SHIFT \| PLPRCR_TEXPS \| PLPRCR_LOLRE )
	274
	275	/*-----------------------------------------------------------------------
	276	* SCCR - System Clock and reset Control Register 15-27
	277	*-----------------------------------------------------------------------
	278	* Set clock output, timebase and RTC source and divider,
	279	* power management and some other internal clocks
	280	*/
	281	#define SCCR_MASK SCCR_EBDF11
6d0f6bcf	282	#define CONFIG_SYS_SCCR (SCCR_RTDIV \| SCCR_RTSEL \| SCCR_CRQEN \| \
682011ff WD	283	SCCR_PRQEN \| SCCR_EBDF00 \| \
	284	SCCR_COM01 \| SCCR_DFSYNC00 \| SCCR_DFBRG00 \| \
	285	SCCR_DFNL000 \| SCCR_DFNH000 \| SCCR_DFLCD001 \| \
	286	SCCR_DFALCD00)
	287
	288	#ifdef NOT_USED
	289	/*-----------------------------------------------------------------------
	290	* PCMCIA stuff
	291	*-----------------------------------------------------------------------
	292	*
	293	*/
6d0f6bcf JCPV	294	#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000)
	295	#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 )
	296	#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000)
	297	#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 )
	298	#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000)
	299	#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 )
	300	#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000)
	301	#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 )
682011ff WD	302
	303	/*-----------------------------------------------------------------------
	304	* IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
	305	*-----------------------------------------------------------------------
	306	*/
	307
	308	#define CONFIG_IDE_PCCARD 1 /* Use IDE with PC Card Adapter */
	309
	310	#undef CONFIG_IDE_PCMCIA /* Direct IDE not supported */
	311	#undef CONFIG_IDE_LED /* LED for ide not supported */
	312	#undef CONFIG_IDE_RESET /* reset for ide not supported */
	313
6d0f6bcf JCPV	314	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
6d0f6bcf JCPV	315	#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
682011ff	316
6d0f6bcf	317	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
682011ff	318
6d0f6bcf	319	#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
682011ff WD	320
682011ff WD	321	/* Offset for data I/O */
6d0f6bcf	322	#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
682011ff WD	323
682011ff WD	324	/* Offset for normal register accesses */
6d0f6bcf	325	#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
682011ff WD	326
682011ff WD	327	/* Offset for alternate registers */
6d0f6bcf	328	#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100
682011ff WD	329
	330	#endif
	331
	332	/************************************************************
	333	* Disk-On-Chip configuration
	334	************************************************************/
6d0f6bcf JCPV	335	#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
	336	#define CONFIG_SYS_DOC_SHORT_TIMEOUT
	337	#define CONFIG_SYS_DOC_SUPPORT_2000
	338	#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM
682011ff WD	339
	340	/*-----------------------------------------------------------------------
	341	*
	342	*-----------------------------------------------------------------------
	343	*
	344	*/
6d0f6bcf JCPV	345	/#define CONFIG_SYS_DER 0x2002000F/
6d0f6bcf JCPV	346	#define CONFIG_SYS_DER 0
682011ff WD	347
	348	/*
	349	* Init Memory Controller:
	350	*
	351	* BR0/1 and OR0/1 (FLASH)
	352	*/
	353
	354	#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */
	355	#define FLASH_BASE1_PRELIM 0x04000000 /* D.O.C Millenium */
	356
	357	/* used to re-map FLASH both when starting from SRAM or FLASH:
	358	* restrict access enough to keep SRAM working (if any)
	359	* but not too much to meddle with FLASH accesses
	360	*/
6d0f6bcf	361	#define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */
682011ff WD	362
682011ff WD	363	/* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 7, EHTR = 1 */
6d0f6bcf	364	#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 \| OR_BI \| OR_SCY_7_CLK \| OR_EHTR)
682011ff	365
6d0f6bcf	366	#define CONFIG_SYS_OR_TIMING_MSYS (OR_ACS_DIV1 \| OR_BI)
682011ff	367
6d0f6bcf JCPV	368	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_FLASH)
6d0f6bcf JCPV	369	#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) \| BR_PS_8 \| BR_V)
682011ff	370
6d0f6bcf JCPV	371	#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM \| CONFIG_SYS_OR_TIMING_MSYS)
6d0f6bcf JCPV	372	#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) \| BR_MS_UPMB \| \
682011ff WD	373	BR_PS_8 \| BR_V)
	374
	375	/*
	376	* BR4 and OR4 (SDRAM)
	377	*
	378	*/
	379	#define SDRAM_BASE4_PRELIM 0x00000000 /* SDRAM bank #0 */
	380	#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
	381
	382	/*
	383	* SDRAM timing:
	384	*/
6d0f6bcf	385	#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM)
682011ff	386
6d0f6bcf JCPV	387	#define CONFIG_SYS_OR4_PRELIM (~(SDRAM_MAX_SIZE-1) \| CONFIG_SYS_OR_TIMING_SDRAM )
6d0f6bcf JCPV	388	#define CONFIG_SYS_BR4_PRELIM ((SDRAM_BASE4_PRELIM & BR_BA_MSK) \| BR_MS_UPMA \| BR_V )
682011ff WD	389
	390	/*
	391	* Memory Periodic Timer Prescaler
	392	*/
	393
	394	/* periodic timer for refresh */
6d0f6bcf	395	#define CONFIG_SYS_MAMR_PTA 187 /* start with divider for 48 MHz */
682011ff WD	396
682011ff WD	397	/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
6d0f6bcf JCPV	398	#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
6d0f6bcf JCPV	399	#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
682011ff WD	400
682011ff WD	401	/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
6d0f6bcf JCPV	402	#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
6d0f6bcf JCPV	403	#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
682011ff WD	404
	405	/*
	406	* MAMR settings for SDRAM
	407	*/
	408
	409	/* 8 column SDRAM */
6d0f6bcf	410	#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
682011ff WD	411	MAMR_AMA_TYPE_0 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A11 \| \
	412	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
	413	/* 9 column SDRAM */
6d0f6bcf	414	#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) \| MAMR_PTAE \| \
682011ff WD	415	MAMR_AMA_TYPE_1 \| MAMR_DSA_1_CYCL \| MAMR_G0CLA_A10 \| \
	416	MAMR_RLFA_1X \| MAMR_WLFA_1X \| MAMR_TLFA_4X)
	417
	418
	419	/*
	420	* Internal Definitions
	421	*
	422	* Boot Flags
	423	*/
	424	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	425	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	426
700a0c64 WD	427	/*
	428	* JFFS2 partitions
	429	*
	430	*/
	431	/* No command line, one static partition, whole device */
	432	#undef CONFIG_JFFS2_CMDLINE
	433	#define CONFIG_JFFS2_DEV "nor0"
	434	#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
	435	#define CONFIG_JFFS2_PART_OFFSET 0x00000000
	436
	437	/* mtdparts command line support */
	438	/* Note: fake mtd_id used, no linux mtd map file */
	439	/*
	440	#define CONFIG_JFFS2_CMDLINE
	441	#define MTDIDS_DEFAULT ""
	442	#define MTDPARTS_DEFAULT ""
	443	*/
	444
682011ff	445	#endif /* __CONFIG_H */