[people/ms/u-boot.git] / include / configs / colibri_vf.h

/*
 * Copyright 2015 Toradex, Inc.
 *
 * Configuration settings for the Toradex VF50/VF61 module.
 *
 * Based on vf610twr.h:
 * Copyright 2013 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_SYS_CACHELINE_SIZE	32

#include <asm/arch/imx-regs.h>

#define CONFIG_VF610
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET
#define CONFIG_SYS_FSL_CLK

#define CONFIG_ARCH_MISC_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_VERSION_VARIABLE
#define CONFIG_BAUDRATE			115200

/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR

/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nand0=vf610_nfc"
#define MTDPARTS_DEFAULT	"mtdparts=vf610_nfc:"		\
				"128k(vf-bcb)ro,"		\
				"1408k(u-boot)ro,"		\
				"512k(u-boot-env),"		\
				"-(ubi)"

#define CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_SYS_FSL_ERRATUM_ESDHC111

#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION

#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBI
#define CONFIG_MTD_UBI_FASTMAP
#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET1_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RMII
#define CONFIG_FEC_MXC_PHYADDR          0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL

#define CONFIG_IPADDR		192.168.10.2
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_SERVERIP		192.168.10.1

#define CONFIG_BOARD_LATE_INIT

#define CONFIG_LOADADDR			0x80008000
#define CONFIG_FDTADDR			0x84000000

/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_SYS_TEXT_BASE		0x3f408000
#define CONFIG_BOARD_SIZE_LIMIT		524288

#define SD_BOOTCMD \
	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0"	\
	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define NFS_BOOTCMD \
	"nfsargs=ip=:::::eth0: root=/dev/nfs\0"	\
	"nfsboot=run setup; " \
	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	"dhcp ${kernel_addr_r} && "	\
	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define UBI_BOOTCMD	\
	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	"ubi.fm_autoconvert=1\0" \
	"ubiboot=run setup; " \
	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \

#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"

#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr_r=0x82000000\0" \
	"fdt_addr_r=0x84000000\0" \
	"kernel_file=zImage\0" \
	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	"fdt_board=eval-v3\0" \
	"defargs=\0" \
	"console=ttyLP0\0" \
	"setup=setenv setupargs " \
	"console=tty1 console=${console}" \
	",${baudrate}n8 ${memargs}\0" \
	"setsdupdate=mmc rescan && set interface mmc && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setusbupdate=usb start && set interface usb && " \
	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	"source ${loadaddr}\0" \
	"setupdate=run setsdupdate || run setusbupdate\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
	SD_BOOTCMD \
	NFS_BOOTCMD \
	UBI_BOOTCMD

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#undef CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		\
			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START	0x80010000
#define CONFIG_SYS_MEMTEST_END		0x87C00000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000
#define CONFIG_CMDLINE_EDITING

/*
 * Stack sizes
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */

/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			(0x80000000)
#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_SYS_NO_FLASH

#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
#define CONFIG_ENV_SIZE			(8 * 1024)
#endif

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE			(64 * 2048)
#define CONFIG_ENV_RANGE		(4 * 64 * 2048)
#define CONFIG_ENV_OFFSET		(12 * 64 * 2048)
#endif

#define CONFIG_SYS_NO_FLASH

#define CONFIG_SYS_CACHELINE_SIZE 32

/* USB Host Support */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_VF
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

/* USB Client Support */
#define CONFIG_TRDX_VID                  0x1B67
#define CONFIG_TRDX_PID_COLIBRI_VF50     0x0016
#define CONFIG_TRDX_PID_COLIBRI_VF61     0x0017
#define CONFIG_TRDX_PID_COLIBRI_VF61IT   0x0018
#define CONFIG_TRDX_PID_COLIBRI_VF50IT   0x0019

/* USB DFU */
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_NAND
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)

/* USB Storage */
#define CONFIG_USB_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE

#endif /* __CONFIG_H */
Commit	Line	Data
e7b860fa SM	1	/*
	2	* Copyright 2015 Toradex, Inc.
	3	*
	4	* Configuration settings for the Toradex VF50/VF61 module.
	5	*
	6	* Based on vf610twr.h:
	7	* Copyright 2013 Freescale Semiconductor, Inc.
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
3709844f AA	15	#define CONFIG_SYS_CACHELINE_SIZE 32
3709844f AA	16
e7b860fa	17	#include <asm/arch/imx-regs.h>
e7b860fa SM	18
	19	#define CONFIG_VF610
	20	#define CONFIG_SYS_THUMB_BUILD
	21	#define CONFIG_USE_ARCH_MEMCPY
	22	#define CONFIG_USE_ARCH_MEMSET
18fb0e3c	23	#define CONFIG_SYS_FSL_CLK
e7b860fa	24
e7b860fa SM	25	#define CONFIG_ARCH_MISC_INIT
	26	#define CONFIG_DISPLAY_CPUINFO
	27	#define CONFIG_DISPLAY_BOARDINFO
	28
	29	#define CONFIG_SKIP_LOWLEVEL_INIT
	30
	31	#define CONFIG_CMD_FUSE
	32	#ifdef CONFIG_CMD_FUSE
	33	#define CONFIG_MXC_OCOTP
	34	#endif
	35
	36	/* Size of malloc() pool */
	37	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	38
	39	#define CONFIG_BOARD_EARLY_INIT_F
	40
e7b860fa SM	41	/* Allow to overwrite serial and ethaddr */
	42	#define CONFIG_ENV_OVERWRITE
	43	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	44	#define CONFIG_VERSION_VARIABLE
e7b860fa	45	#define CONFIG_BAUDRATE 115200
e7b860fa SM	46
	47	/* NAND support */
	48	#define CONFIG_CMD_NAND
8fca2d8c	49	#define CONFIG_SYS_NAND_ONFI_DETECTION
e7b860fa SM	50	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	51	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
	52
	53	/* Dynamic MTD partition support */
	54	#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
	55	#define CONFIG_MTD_PARTITIONS
	56	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	57	#define MTDIDS_DEFAULT "nand0=vf610_nfc"
	58	#define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
	59	"128k(vf-bcb)ro," \
	60	"1408k(u-boot)ro," \
	61	"512k(u-boot-env)," \
	62	"-(ubi)"
	63
e7b860fa SM	64	#define CONFIG_MMC
	65	#define CONFIG_FSL_ESDHC
	66	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	67	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	68
	69	#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
	70
e7b860fa	71	#define CONFIG_GENERIC_MMC
e7b860fa SM	72	#define CONFIG_DOS_PARTITION
	73
	74	#define CONFIG_RBTREE
	75	#define CONFIG_LZO
e7b860fa SM	76	#define CONFIG_CMD_UBI
	77	#define CONFIG_MTD_UBI_FASTMAP
	78	#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
	79
e7b860fa SM	80	#define CONFIG_FEC_MXC
	81	#define CONFIG_MII
	82	#define IMX_FEC_BASE ENET1_BASE_ADDR
	83	#define CONFIG_FEC_XCV_TYPE RMII
	84	#define CONFIG_FEC_MXC_PHYADDR 0
	85	#define CONFIG_PHYLIB
	86	#define CONFIG_PHY_MICREL
	87
	88	#define CONFIG_IPADDR 192.168.10.2
	89	#define CONFIG_NETMASK 255.255.255.0
	90	#define CONFIG_SERVERIP 192.168.10.1
	91
e7b860fa SM	92	#define CONFIG_BOARD_LATE_INIT
	93
	94	#define CONFIG_LOADADDR 0x80008000
	95	#define CONFIG_FDTADDR 0x84000000
	96
	97	/* We boot from the gfxRAM area of the OCRAM. */
	98	#define CONFIG_SYS_TEXT_BASE 0x3f408000
	99	#define CONFIG_BOARD_SIZE_LIMIT 524288
	100
	101	#define SD_BOOTCMD \
	102	"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
	103	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
	104	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
	105	"load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
	106	"load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	107	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	108
	109	#define NFS_BOOTCMD \
	110	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
	111	"nfsboot=run setup; " \
	112	"setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
	113	"${setupargs} ${vidargs}; echo Booting from NFS...;" \
	114	"dhcp ${kernel_addr_r} && " \
	115	"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
	116	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	117
	118	#define UBI_BOOTCMD \
	119	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
	120	"ubi.fm_autoconvert=1\0" \
	121	"ubiboot=run setup; " \
	122	"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
	123	"${setupargs} ${vidargs}; echo Booting from NAND...; " \
	124	"ubi part ubi && ubifsmount ubi0:rootfs && " \
	125	"ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
	126	"ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
	127	"bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
	128
	129	#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
	130
bba97cd2 SM	131	#define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
bba97cd2 SM	132
e7b860fa SM	133	#define CONFIG_EXTRA_ENV_SETTINGS \
	134	"kernel_addr_r=0x82000000\0" \
	135	"fdt_addr_r=0x84000000\0" \
	136	"kernel_file=zImage\0" \
	137	"fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
	138	"fdt_board=eval-v3\0" \
	139	"defargs=\0" \
	140	"console=ttyLP0\0" \
	141	"setup=setenv setupargs " \
	142	"console=tty1 console=${console}" \
	143	",${baudrate}n8 ${memargs}\0" \
	144	"setsdupdate=mmc rescan && set interface mmc && " \
	145	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	146	"source ${loadaddr}\0" \
	147	"setusbupdate=usb start && set interface usb && " \
	148	"fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
	149	"source ${loadaddr}\0" \
	150	"setupdate=run setsdupdate \|\| run setusbupdate\0" \
	151	"mtdparts=" MTDPARTS_DEFAULT "\0" \
bba97cd2	152	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
e7b860fa SM	153	SD_BOOTCMD \
	154	NFS_BOOTCMD \
	155	UBI_BOOTCMD
	156
	157	/* Miscellaneous configurable options */
	158	#define CONFIG_SYS_LONGHELP /* undef to save memory */
e7b860fa	159	#undef CONFIG_AUTO_COMPLETE
aa5a0d98	160	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
e7b860fa SM	161	#define CONFIG_SYS_PBSIZE \
	162	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	163	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	164	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	165
e7b860fa SM	166	#define CONFIG_SYS_MEMTEST_START 0x80010000
	167	#define CONFIG_SYS_MEMTEST_END 0x87C00000
	168
	169	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	170	#define CONFIG_SYS_HZ 1000
	171	#define CONFIG_CMDLINE_EDITING
	172
	173	/*
	174	* Stack sizes
	175	* The stack sizes are set up in start.S using the settings below
	176	*/
	177	#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
	178
	179	/* Physical memory map */
	180	#define CONFIG_NR_DRAM_BANKS 1
	181	#define PHYS_SDRAM (0x80000000)
	182	#define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
	183
	184	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	185	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	186	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	187
	188	#define CONFIG_SYS_INIT_SP_OFFSET \
	189	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	190	#define CONFIG_SYS_INIT_SP_ADDR \
	191	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	192
	193	/* Environment organization */
	194	#define CONFIG_SYS_NO_FLASH
	195
	196	#ifdef CONFIG_ENV_IS_IN_MMC
	197	#define CONFIG_SYS_MMC_ENV_DEV 0
	198	#define CONFIG_ENV_OFFSET (12 * 64 * 1024)
	199	#define CONFIG_ENV_SIZE (8 * 1024)
	200	#endif
	201
	202	#ifdef CONFIG_ENV_IS_IN_NAND
	203	#define CONFIG_ENV_SIZE (64 * 2048)
	204	#define CONFIG_ENV_RANGE (4 * 64 * 2048)
	205	#define CONFIG_ENV_OFFSET (12 * 64 * 2048)
	206	#endif
	207
e7b860fa SM	208	#define CONFIG_SYS_NO_FLASH
	209
	210	#define CONFIG_SYS_CACHELINE_SIZE 32
	211
bba97cd2	212	/* USB Host Support */
bba97cd2 SM	213	#define CONFIG_USB_EHCI
	214	#define CONFIG_USB_EHCI_VF
	215	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	216	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	217
	218	/* USB Client Support */
bba97cd2 SM	219	#define CONFIG_TRDX_VID 0x1B67
	220	#define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
	221	#define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
	222	#define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
	223	#define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
bba97cd2 SM	224
bba97cd2 SM	225	/* USB DFU */
01acd6ab	226	#define CONFIG_USB_FUNCTION_DFU
bba97cd2 SM	227	#define CONFIG_DFU_NAND
	228	#define CONFIG_DFU_MMC
	229	#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
	230
	231	/* USB Storage */
	232	#define CONFIG_USB_STORAGE
01acd6ab	233	#define CONFIG_USB_FUNCTION_MASS_STORAGE
bba97cd2	234
e7b860fa	235	#endif /* __CONFIG_H */