[people/ms/u-boot.git] / include / configs / dreamplug.h

/*
 * (C) Copyright 2011
 * Jason Cooper <u-boot@lakedaemon.net>
 *
 * Based on work by:
 * Marvell Semiconductor <www.marvell.com>
 * Written-by: Siddarth Gore <gores@marvell.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_DREAMPLUG_H
#define _CONFIG_DREAMPLUG_H

/*
 * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
 * from Linus' kernel.org tree.  This hasn't been updated primarily due to
 * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
 * here.
 */
#include <asm/mach-types.h>
#ifdef MACH_TYPE_DREAMPLUG
#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
#else
#define MACH_TYPE_DREAMPLUG            3550
#endif

/*
 * Version number information
 */
#define CONFIG_IDENT_STRING	"\nMarvell-DreamPlug"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
#define CONFIG_MACH_TYPE	MACH_TYPE_DREAMPLUG

/*
 * Commands configuration
 */

/*
 * mv-plug-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-plug-common.h"

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH	1
#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64k */
#else
#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
#endif

#ifdef CONFIG_CMD_SF
#define CONFIG_HARD_SPI			1
#define CONFIG_KIRKWOOD_SPI		1
#define CONFIG_ENV_SPI_BUS		0
#define CONFIG_ENV_SPI_CS		0
#define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */
#endif

/*
 * max 4k env size is enough, but in case of nand
 * it has to be rounded to sector size
 */
#define CONFIG_ENV_SIZE			0x1000  /* 4k */
#define CONFIG_ENV_ADDR			0x100000
#define CONFIG_ENV_OFFSET		0x100000 /* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
	"bootm 0x6400000;"

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"x_bootcmd_ethernet=ping 192.168.2.1\0"	\
	"x_bootcmd_usb=usb start\0"	\
	"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
	"x_bootargs=console=ttyS0,115200\0"	\
	"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
#define CONFIG_PHY_BASE_ADR	0
#endif /* CONFIG_CMD_NET */

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/

#endif /* _CONFIG_DREAMPLUG_H */
Commit	Line	Data
2e0c1c7d JC	1	/*
	2	* (C) Copyright 2011
	3	* Jason Cooper <u-boot@lakedaemon.net>
	4	*
	5	* Based on work by:
	6	* Marvell Semiconductor <www.marvell.com>
	7	* Written-by: Siddarth Gore <gores@marvell.com>
	8	*
1a459660	9	* SPDX-License-Identifier: GPL-2.0+
2e0c1c7d JC	10	*/
	11
	12	#ifndef _CONFIG_DREAMPLUG_H
	13	#define _CONFIG_DREAMPLUG_H
	14
	15	/*
	16	* FIXME: This belongs in mach-types.h. However, we only pull mach-types
	17	* from Linus' kernel.org tree. This hasn't been updated primarily due to
	18	* the recent arch/arm reshuffling. So, in the meantime, we'll place it
	19	* here.
	20	*/
	21	#include <asm/mach-types.h>
	22	#ifdef MACH_TYPE_DREAMPLUG
	23	#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
	24	#else
	25	#define MACH_TYPE_DREAMPLUG 3550
	26	#endif
	27
	28	/*
	29	* Version number information
	30	*/
	31	#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
	32
	33	/*
	34	* High Level Configuration Options (easy to change)
	35	*/
	36	#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
2e0c1c7d	37	#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
f6b1f665	38
2e0c1c7d JC	39	/*
	40	* Commands configuration
	41	*/
2e0c1c7d JC	42
2e0c1c7d JC	43	/*
38c0e864	44	* mv-plug-common.h should be defined after CMD configs since it used them
2e0c1c7d JC	45	* to enable certain macros
2e0c1c7d JC	46	*/
38c0e864	47	#include "mv-plug-common.h"
2e0c1c7d JC	48
	49	/*
	50	* Environment variables configurations
	51	*/
	52	#ifdef CONFIG_SPI_FLASH
	53	#define CONFIG_ENV_IS_IN_SPI_FLASH 1
	54	#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
	55	#else
	56	#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
	57	#endif
	58
	59	#ifdef CONFIG_CMD_SF
2e0c1c7d JC	60	#define CONFIG_HARD_SPI 1
2e0c1c7d JC	61	#define CONFIG_KIRKWOOD_SPI 1
2e0c1c7d JC	62	#define CONFIG_ENV_SPI_BUS 0
	63	#define CONFIG_ENV_SPI_CS 0
	64	#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
	65	#endif
	66
	67	/*
	68	* max 4k env size is enough, but in case of nand
	69	* it has to be rounded to sector size
	70	*/
	71	#define CONFIG_ENV_SIZE 0x1000 /* 4k */
	72	#define CONFIG_ENV_ADDR 0x100000
	73	#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
	74
	75	/*
	76	* Default environment variables
	77	*/
	78	#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
	79	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
	80	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
	81	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
	82	"bootm 0x6400000;"
	83
	84	#define CONFIG_EXTRA_ENV_SETTINGS \
	85	"x_bootcmd_ethernet=ping 192.168.2.1\0" \
	86	"x_bootcmd_usb=usb start\0" \
	87	"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
	88	"x_bootargs=console=ttyS0,115200\0" \
	89	"x_bootargs_root=root=/dev/sda2 rootdelay=10\0"
	90
	91	/*
	92	* Ethernet Driver configuration
	93	*/
	94	#ifdef CONFIG_CMD_NET
	95	#define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
	96	#define CONFIG_PHY_BASE_ADR 0
	97	#endif /* CONFIG_CMD_NET */
	98
	99	/*
	100	* SATA Driver configuration
	101	*/
	102	#ifdef CONFIG_MVSATA_IDE
	103	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	104	#endif /CONFIG_MVSATA_IDE/
	105
2e0c1c7d	106	#endif /* _CONFIG_DREAMPLUG_H */