[people/ms/u-boot.git] / include / configs / eXalion.h

/*
 * (C) Copyright 2001
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/* ------------------------------------------------------------------------- */

/*
 * board/config.h - configuration options, board specific
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 * (easy to change)
 */

#define CONFIG_MPC824X		1
/* #define CONFIG_MPC8240	   1 */
#define CONFIG_MPC8245		1
#define CONFIG_EXALION		1

#if defined (CONFIG_MPC8240)
    /* #warning	 ---------- eXalion with MPC8240 --------------- */
#elif defined (CONFIG_MPC8245)
    /* #warning	 ++++++++++ eXalion with MPC8245 +++++++++++++++ */
#elif defined (CONFIG_MPC8245) && defined (CONFIG_MPC8245)
#error #### Both types of MPC824x defined (CONFIG_8240 and CONFIG_8245)
#else
#error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif
/* older kernels need clock in MHz newer in Hz */
					/* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz	    */
#undef CONFIG_CLOCKS_IN_MHZ

#define CONFIG_BOOTDELAY	10


						    /*#define CONFIG_DRAM_SPEED	      66   */ /* MHz			     */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_FLASH
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_ENV
#define CONFIG_CMD_PCI


/*-----------------------------------------------------------------------
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		1	/* undef to save memory		*/
#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size	*/
#define CONFIG_SYS_MAXARGS		8	/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_LOAD_ADDR		0x00100000	/* default load address		*/

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

#define CONFIG_MISC_INIT_R	1

/*-----------------------------------------------------------------------
 * Start addresses for the final memory configuration
 * (Set up by the startup code)
 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 */
#define CONFIG_SYS_SDRAM_BASE		0x00000000
#define CONFIG_SYS_MAX_RAM_SIZE	0x10000000	/* 1 GBytes - initdram() will	   */
					     /* return real value.		*/

#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100

#undef	CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	    */
#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE

/*-----------------------------------------------------------------------
 * Definitions for initial stack pointer and data area
 */
#define CONFIG_SYS_INIT_DATA_SIZE	128

#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000
#define CONFIG_SYS_INIT_RAM_END	0x1000
#define CONFIG_SYS_INIT_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)

#define CONFIG_SYS_GBL_DATA_SIZE	 256	/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET


#if defined (CONFIG_MPC8240)
#define CONFIG_SYS_FLASH_BASE	    0xFFE00000
#define CONFIG_SYS_FLASH_SIZE	    (2 * 1024 * 1024)	/* onboard 2MByte flash	    */
#elif defined (CONFIG_MPC8245)
#define CONFIG_SYS_FLASH_BASE	    0xFFC00000
#define CONFIG_SYS_FLASH_SIZE	    (4 * 1024 * 1024)	/* onboard 4MByte flash	    */
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif

#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_SECT_SIZE	0x20000 /* Size of one Flash sector */
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE	/* Use one Flash sector for enviroment	*/
#define CONFIG_ENV_ADDR		0xFFFC0000
#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning  */

#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/

#define CONFIG_SYS_ALT_MEMTEST		1	/* use real memory test	    */
#define CONFIG_SYS_MEMTEST_START	0x00004000	/* memtest works on	    */
#define CONFIG_SYS_MEMTEST_END		0x02000000	/* 0 ... 32 MB in DRAM	    */

#define CONFIG_SYS_EUMB_ADDR		0xFC000000

/* #define CONFIG_SYS_ISA_MEM		   0xFD000000 */
#define CONFIG_SYS_ISA_IO		0xFE000000

/*-----------------------------------------------------------------------
 * FLASH organization
 */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* Max number of flash banks	    */
#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per flash  */

#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */

#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE
#define FLASH_BASE1_PRELIM	0


/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_FLASH_INCREMENT	0	/* there is only one bank		*/
#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware protection		*/
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/


/*-----------------------------------------------------------------------
 * PCI stuff
 */
#define CONFIG_PCI		1	/* include pci support		*/
#undef	CONFIG_PCI_PNP

#define CONFIG_NET_MULTI	1	/* Multi ethernet cards support */

#define CONFIG_EEPRO100		1

#define PCI_ENET0_MEMADDR	0x80000000	/* Intel 82559ER */
#define PCI_ENET0_IOADDR	0x80000000
#define PCI_ENET1_MEMADDR	0x81000000	/* Intel 82559ER */
#define PCI_ENET1_IOADDR	0x81000000
#define PCI_ENET2_MEMADDR	0x82000000	/* Broadcom BCM569xx */
#define PCI_ENET2_IOADDR	0x82000000
#define PCI_ENET3_MEMADDR	0x83000000	/* Broadcom BCM56xx */
#define PCI_ENET3_IOADDR	0x83000000

/*-----------------------------------------------------------------------
 * NS16550 Configuration
 */
#define CONFIG_SYS_NS16550		1
#define CONFIG_SYS_NS16550_SERIAL	1

#define CONFIG_CONS_INDEX	1
#define CONFIG_BAUDRATE		38400

#define CONFIG_SYS_NS16550_REG_SIZE	1

#if (CONFIG_CONS_INDEX == 1)
#define CONFIG_SYS_NS16550_CLK		1843200 /* COM1 only !	*/
#else
#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
#endif

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_ISA_IO + 0x3F8)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_EUMB_ADDR + 0x4500)
#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_EUMB_ADDR + 0x4600)

/*-----------------------------------------------------------------------
 * select i2c support configuration
 *
 * Supported configurations are {none, software, hardware} drivers.
 * If the software driver is chosen, there are some additional
 * configuration items that the driver uses to drive the port pins.
 */
#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
#undef	CONFIG_SOFT_I2C		/* I2C bit-banged		*/
#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
#define CONFIG_SYS_I2C_SLAVE		0x7F

/*-----------------------------------------------------------------------
 * Low Level Configuration Settings
 * (address mappings, register initial values, etc.)
 * You should know what you are doing if you make changes here.
 */
#define CONFIG_SYS_HZ			1000

#define CONFIG_SYS_CLK_FREQ	33333333	/* external frequency to pll	*/
#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2	/* for MPC8240 only		*/

				       /*#define CONFIG_133MHZ_DRAM	 1 */ /* For 133 MHZ DRAM only !!!!!!!!!!!    */

#if defined (CONFIG_MPC8245)
/* Bit-field values for PMCR2.							*/
#if defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_DLL_EXTEND		0x80	/* use DLL extended range - 133MHz only */
#define CONFIG_SYS_PCI_HOLD_DEL	0x20	/* delay and hold timing - 133MHz only	*/
#endif

/* Bit-field values for MIOCR1.							*/
#if !defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_DLL_MAX_DELAY	0x04	/*  longer DLL delay line - 66MHz only	*/
#endif
/* Bit-field values for MIOCR2.							*/
#define CONFIG_SYS_SDRAM_DSCD		0x20	/* SDRAM data in sample clock delay	*/
					/*	- note bottom 3 bits MUST be 0	*/
#endif

/* Bit-field values for MCCR1.							*/
#define CONFIG_SYS_ROMNAL		7	/*rom/flash next access time		*/
#define CONFIG_SYS_ROMFAL	       11	/*rom/flash access time			*/

/* Bit-field values for MCCR2.							*/
#define CONFIG_SYS_TSWAIT		0x5	/* Transaction Start Wait States timer	*/
#if defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_REFINT		1300	/* no of clock cycles between CBR	*/
#else  /* refresh cycles */
#define CONFIG_SYS_REFINT		750
#endif

/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.		*/
#if defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_BSTOPRE		1023
#else
#define CONFIG_SYS_BSTOPRE		250
#endif

/* Bit-field values for MCCR3.							*/
/* the following are for SDRAM only						*/

#if defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_REFREC		9	/* Refresh to activate interval		*/
#else
#define CONFIG_SYS_REFREC		5	/* Refresh to activate interval		*/
#endif
#if defined (CONFIG_MPC8240)
#define CONFIG_SYS_RDLAT		2	/* data latency from read command	*/
#endif

/* Bit-field values for MCCR4.	*/
#if defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_PRETOACT		3	/* Precharge to activate interval	*/
#define CONFIG_SYS_ACTTOPRE		7	/* Activate to Precharge interval	*/
#define CONFIG_SYS_ACTORW		5	/* Activate to R/W			*/
#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
#else
#if 0
#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
#define CONFIG_SYS_ACTTOPRE		3	/* Activate to Precharge interval	*/
#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
#define CONFIG_SYS_SDMODE_CAS_LAT	2	/* SDMODE CAS latency			*/
#endif
#define CONFIG_SYS_PRETOACT		2	/* Precharge to activate interval	*/
#define CONFIG_SYS_ACTTOPRE		5	/* Activate to Precharge interval	*/
#define CONFIG_SYS_ACTORW		3	/* Activate to R/W			*/
#define CONFIG_SYS_SDMODE_CAS_LAT	3	/* SDMODE CAS latency			*/
#endif
#define CONFIG_SYS_SDMODE_WRAP		0	/* SDMODE wrap type			*/
#define CONFIG_SYS_SDMODE_BURSTLEN	2	/* SDMODE Burst length 2=4, 3=8		*/
#define CONFIG_SYS_REGDIMM		0
#if defined (CONFIG_MPC8240)
#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   0
#elif defined (CONFIG_MPC8245)
#define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
#define CONFIG_SYS_EXTROM		    0
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif


/*-----------------------------------------------------------------------
 memory bank settings
 * only bits 20-29 are actually used from these vales to set the
 * start/end address the upper two bits will be 0, and the lower 20
 * bits will be set to 0x00000 for a start address, or 0xfffff for an
 * end address
 */
#define CONFIG_SYS_BANK0_START		0x00000000
#define CONFIG_SYS_BANK0_END		(CONFIG_SYS_MAX_RAM_SIZE - 1)
#define CONFIG_SYS_BANK0_ENABLE	1
#define CONFIG_SYS_BANK1_START		0x3ff00000
#define CONFIG_SYS_BANK1_END		0x3fffffff
#define CONFIG_SYS_BANK1_ENABLE	0
#define CONFIG_SYS_BANK2_START		0x3ff00000
#define CONFIG_SYS_BANK2_END		0x3fffffff
#define CONFIG_SYS_BANK2_ENABLE	0
#define CONFIG_SYS_BANK3_START		0x3ff00000
#define CONFIG_SYS_BANK3_END		0x3fffffff
#define CONFIG_SYS_BANK3_ENABLE	0
#define CONFIG_SYS_BANK4_START		0x00000000
#define CONFIG_SYS_BANK4_END		0x00000000
#define CONFIG_SYS_BANK4_ENABLE	0
#define CONFIG_SYS_BANK5_START		0x00000000
#define CONFIG_SYS_BANK5_END		0x00000000
#define CONFIG_SYS_BANK5_ENABLE	0
#define CONFIG_SYS_BANK6_START		0x00000000
#define CONFIG_SYS_BANK6_END		0x00000000
#define CONFIG_SYS_BANK6_ENABLE	0
#define CONFIG_SYS_BANK7_START		0x00000000
#define CONFIG_SYS_BANK7_END		0x00000000
#define CONFIG_SYS_BANK7_ENABLE	0

/*-----------------------------------------------------------------------
 * Memory bank enable bitmask, specifying which of the banks defined above
 are actually present. MSB is for bank #7, LSB is for bank #0.
 */
#define CONFIG_SYS_BANK_ENABLE		0x01

#if defined (CONFIG_MPC8240)
#define CONFIG_SYS_ODCR		0xDF	/* configures line driver impedances,	*/
					/* see 8240 book for bit definitions	*/
#elif defined (CONFIG_MPC8245)
#if defined (CONFIG_133MHZ_DRAM)
#define CONFIG_SYS_ODCR		0xFE	/* configures line driver impedances - 133MHz	*/
#else
#define CONFIG_SYS_ODCR		0xDE	/* configures line driver impedances - 66MHz	*/
#endif
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif

#define CONFIG_SYS_PGMAX		0x32	/* how long the 8240 retains the	*/
					/* currently accessed page in memory	*/
					/* see 8240 book for details		*/

/*-----------------------------------------------------------------------
 * Block Address Translation (BAT) register settings.
 */
/* SDRAM 0 - 256MB */
#define CONFIG_SYS_IBAT0L	(CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT0U	(CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)

/* stack in DCACHE @ 1GB (no backing mem) */
#define CONFIG_SYS_IBAT1L	(CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT1U	(CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)

/* PCI memory */
#define CONFIG_SYS_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)

/* Flash, config addrs, etc */
#define CONFIG_SYS_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
#define CONFIG_SYS_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)

#define CONFIG_SYS_DBAT0L	CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U	CONFIG_SYS_IBAT0U
#define CONFIG_SYS_DBAT1L	CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U	CONFIG_SYS_IBAT1U
#define CONFIG_SYS_DBAT2L	CONFIG_SYS_IBAT2L
#define CONFIG_SYS_DBAT2U	CONFIG_SYS_IBAT2U
#define CONFIG_SYS_DBAT3L	CONFIG_SYS_IBAT3L
#define CONFIG_SYS_DBAT3U	CONFIG_SYS_IBAT3U


/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_CACHELINE_SIZE	32
#if defined(CONFIG_CMD_KGDB)
#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
#endif


/*-----------------------------------------------------------------------
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
#define BOOTFLAG_WARM		0x02	/* Software reboot			*/


/* values according to the manual */
#define CONFIG_DRAM_50MHZ	1
#define CONFIG_SDRAM_50MHZ

#undef	NR_8259_INTS
#define NR_8259_INTS		1

/*-----------------------------------------------------------------------
 * IDE/ATA stuff
 */
#define CONFIG_SYS_IDE_MAXBUS	    1	/* max. 2 IDE busses	*/
#define CONFIG_SYS_IDE_MAXDEVICE   (CONFIG_SYS_IDE_MAXBUS*1)	/* max. 2 drives per IDE bus */

#define CONFIG_SYS_ATA_BASE_ADDR   CONFIG_SYS_ISA_IO	/* base address */
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0	/* ide0 offste */
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170	/* ide1 offset */
#define CONFIG_SYS_ATA_DATA_OFFSET 0	/* data reg offset  */
#define CONFIG_SYS_ATA_REG_OFFSET  0	/* reg offset */
#define CONFIG_SYS_ATA_ALT_OFFSET  0x200	/* alternate register offset */

#define CONFIG_ATAPI

#undef	CONFIG_IDE_8xx_DIRECT	/* no pcmcia interface required */
#undef	CONFIG_IDE_LED		/* no led for ide supported	*/
#undef	CONFIG_IDE_RESET	/* reset for ide supported...	 */
#undef	CONFIG_IDE_RESET_ROUTINE	/* with a special reset function */

/*-----------------------------------------------------------------------
 * DISK Partition support
 */
#define CONFIG_DOS_PARTITION

/*-----------------------------------------------------------------------
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */

#endif /* __CONFIG_H */
Commit	Line	Data
80885a9d WD	1	/*
	2	* (C) Copyright 2001
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
	5	* See file CREDITS for list of people who contributed to this
	6	* project.
	7	*
	8	* This program is free software; you can redistribute it and/or
	9	* modify it under the terms of the GNU General Public License as
	10	* published by the Free Software Foundation; either version 2 of
	11	* the License, or (at your option) any later version.
	12	*
	13	* This program is distributed in the hope that it will be useful,
	14	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	15	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	16	* GNU General Public License for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software
	20	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	21	* MA 02111-1307 USA
	22	*/
	23
	24	/* ------------------------------------------------------------------------- */
	25
	26	/*
	27	* board/config.h - configuration options, board specific
	28	*/
	29
	30	#ifndef __CONFIG_H
	31	#define __CONFIG_H
	32
	33	/*
	34	* High Level Configuration Options
	35	* (easy to change)
	36	*/
	37
	38	#define CONFIG_MPC824X 1
	39	/* #define CONFIG_MPC8240 1 */
	40	#define CONFIG_MPC8245 1
	41	#define CONFIG_EXALION 1
	42
	43	#if defined (CONFIG_MPC8240)
	44	/* #warning ---------- eXalion with MPC8240 --------------- */
	45	#elif defined (CONFIG_MPC8245)
	46	/* #warning ++++++++++ eXalion with MPC8245 +++++++++++++++ */
	47	#elif defined (CONFIG_MPC8245) && defined (CONFIG_MPC8245)
	48	#error #### Both types of MPC824x defined (CONFIG_8240 and CONFIG_8245)
	49	#else
	50	#error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
	51	#endif
	52	/* older kernels need clock in MHz newer in Hz */
132ba5fd	53	/* #define CONFIG_CLOCKS_IN_MHZ 1 / / clocks passsed to Linux in MHz */
80885a9d WD	54	#undef CONFIG_CLOCKS_IN_MHZ
	55
	56	#define CONFIG_BOOTDELAY 10
	57
	58
132ba5fd	59	/#define CONFIG_DRAM_SPEED 66 / /* MHz */
80885a9d	60
80ff4f99 JL	61	/*
	62	* BOOTP options
	63	*/
	64	#define CONFIG_BOOTP_BOOTFILESIZE
	65	#define CONFIG_BOOTP_BOOTPATH
	66	#define CONFIG_BOOTP_GATEWAY
	67	#define CONFIG_BOOTP_HOSTNAME
	68
	69
1bec3d30 JL	70	/*
	71	* Command line configuration.
	72	*/
	73	#include <config_cmd_default.h>
80885a9d	74
1bec3d30 JL	75	#define CONFIG_CMD_FLASH
	76	#define CONFIG_CMD_SDRAM
	77	#define CONFIG_CMD_I2C
	78	#define CONFIG_CMD_IDE
	79	#define CONFIG_CMD_FAT
	80	#define CONFIG_CMD_ENV
	81	#define CONFIG_CMD_PCI
80885a9d WD	82
	83
	84	/*-----------------------------------------------------------------------
	85	* Miscellaneous configurable options
	86	*/
6d0f6bcf JCPV	87	#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
	88	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	89	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	90	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	91	#define CONFIG_SYS_MAXARGS 8 /* max number of command args */
	92	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	93	#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
80885a9d	94
6d0f6bcf	95	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
80885a9d WD	96
	97	#define CONFIG_MISC_INIT_R 1
	98
	99	/*-----------------------------------------------------------------------
	100	* Start addresses for the final memory configuration
	101	* (Set up by the startup code)
6d0f6bcf	102	* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
80885a9d	103	*/
6d0f6bcf JCPV	104	#define CONFIG_SYS_SDRAM_BASE 0x00000000
6d0f6bcf JCPV	105	#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000 /* 1 GBytes - initdram() will */
80885a9d WD	106	/* return real value. */
80885a9d WD	107
6d0f6bcf	108	#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
80885a9d	109
6d0f6bcf JCPV	110	#undef CONFIG_SYS_RAMBOOT
	111	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
	112	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
80885a9d WD	113
	114	/*-----------------------------------------------------------------------
	115	* Definitions for initial stack pointer and data area
	116	*/
6d0f6bcf	117	#define CONFIG_SYS_INIT_DATA_SIZE 128
80885a9d	118
6d0f6bcf JCPV	119	#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
	120	#define CONFIG_SYS_INIT_RAM_END 0x1000
	121	#define CONFIG_SYS_INIT_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_INIT_DATA_SIZE)
80885a9d	122
6d0f6bcf JCPV	123	#define CONFIG_SYS_GBL_DATA_SIZE 256 /* size in bytes reserved for initial data */
	124	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	125	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
80885a9d WD	126
	127
	128	#if defined (CONFIG_MPC8240)
6d0f6bcf JCPV	129	#define CONFIG_SYS_FLASH_BASE 0xFFE00000
6d0f6bcf JCPV	130	#define CONFIG_SYS_FLASH_SIZE (2 * 1024 * 1024) /* onboard 2MByte flash */
80885a9d	131	#elif defined (CONFIG_MPC8245)
6d0f6bcf JCPV	132	#define CONFIG_SYS_FLASH_BASE 0xFFC00000
6d0f6bcf JCPV	133	#define CONFIG_SYS_FLASH_SIZE (4 * 1024 * 1024) /* onboard 4MByte flash */
80885a9d WD	134	#else
	135	#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
	136	#endif
	137
5a1aceb0	138	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	139	#define CONFIG_ENV_SECT_SIZE 0x20000 /* Size of one Flash sector */
	140	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Use one Flash sector for enviroment */
	141	#define CONFIG_ENV_ADDR 0xFFFC0000
	142	#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
80885a9d	143
6d0f6bcf	144	#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
80885a9d	145
6d0f6bcf JCPV	146	#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */
	147	#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
	148	#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
80885a9d	149
6d0f6bcf	150	#define CONFIG_SYS_EUMB_ADDR 0xFC000000
80885a9d	151
6d0f6bcf JCPV	152	/* #define CONFIG_SYS_ISA_MEM 0xFD000000 */
6d0f6bcf JCPV	153	#define CONFIG_SYS_ISA_IO 0xFE000000
80885a9d WD	154
	155	/*-----------------------------------------------------------------------
	156	* FLASH organization
	157	*/
6d0f6bcf JCPV	158	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
6d0f6bcf JCPV	159	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */
80885a9d	160
6d0f6bcf JCPV	161	#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
6d0f6bcf JCPV	162	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
80885a9d	163
6d0f6bcf	164	#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE
80885a9d WD	165	#define FLASH_BASE1_PRELIM 0
	166
	167
	168	/*-----------------------------------------------------------------------
	169	* FLASH and environment organization
	170	*/
	171
6d0f6bcf	172	#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
00b1883a	173	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
6d0f6bcf JCPV	174	#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
	175	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
	176	#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
	177	#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware protection */
	178	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
80885a9d WD	179
	180
	181	/*-----------------------------------------------------------------------
	182	* PCI stuff
	183	*/
	184	#define CONFIG_PCI 1 /* include pci support */
	185	#undef CONFIG_PCI_PNP
	186
	187	#define CONFIG_NET_MULTI 1 /* Multi ethernet cards support */
	188
	189	#define CONFIG_EEPRO100 1
	190
	191	#define PCI_ENET0_MEMADDR 0x80000000 /* Intel 82559ER */
	192	#define PCI_ENET0_IOADDR 0x80000000
	193	#define PCI_ENET1_MEMADDR 0x81000000 /* Intel 82559ER */
	194	#define PCI_ENET1_IOADDR 0x81000000
	195	#define PCI_ENET2_MEMADDR 0x82000000 /* Broadcom BCM569xx */
	196	#define PCI_ENET2_IOADDR 0x82000000
	197	#define PCI_ENET3_MEMADDR 0x83000000 /* Broadcom BCM56xx */
	198	#define PCI_ENET3_IOADDR 0x83000000
	199
	200	/*-----------------------------------------------------------------------
	201	* NS16550 Configuration
	202	*/
6d0f6bcf JCPV	203	#define CONFIG_SYS_NS16550 1
6d0f6bcf JCPV	204	#define CONFIG_SYS_NS16550_SERIAL 1
80885a9d WD	205
	206	#define CONFIG_CONS_INDEX 1
	207	#define CONFIG_BAUDRATE 38400
	208
6d0f6bcf	209	#define CONFIG_SYS_NS16550_REG_SIZE 1
80885a9d WD	210
80885a9d WD	211	#if (CONFIG_CONS_INDEX == 1)
6d0f6bcf	212	#define CONFIG_SYS_NS16550_CLK 1843200 /* COM1 only ! */
80885a9d	213	#else
6d0f6bcf	214	#define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
80885a9d WD	215	#endif
80885a9d WD	216
6d0f6bcf JCPV	217	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + 0x3F8)
	218	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500)
	219	#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4600)
80885a9d WD	220
	221	/*-----------------------------------------------------------------------
	222	* select i2c support configuration
	223	*
	224	* Supported configurations are {none, software, hardware} drivers.
	225	* If the software driver is chosen, there are some additional
	226	* configuration items that the driver uses to drive the port pins.
	227	*/
	228	#define CONFIG_HARD_I2C 1 /* To enable I2C support */
	229	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
6d0f6bcf JCPV	230	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
6d0f6bcf JCPV	231	#define CONFIG_SYS_I2C_SLAVE 0x7F
80885a9d WD	232
	233	/*-----------------------------------------------------------------------
	234	* Low Level Configuration Settings
	235	* (address mappings, register initial values, etc.)
	236	* You should know what you are doing if you make changes here.
	237	*/
6d0f6bcf	238	#define CONFIG_SYS_HZ 1000
80885a9d WD	239
	240	#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
	241	#define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER 2 /* for MPC8240 only */
	242
132ba5fd	243	/#define CONFIG_133MHZ_DRAM 1 / /* For 133 MHZ DRAM only !!!!!!!!!!! */
80885a9d WD	244
	245	#if defined (CONFIG_MPC8245)
	246	/* Bit-field values for PMCR2. */
	247	#if defined (CONFIG_133MHZ_DRAM)
6d0f6bcf JCPV	248	#define CONFIG_SYS_DLL_EXTEND 0x80 /* use DLL extended range - 133MHz only */
6d0f6bcf JCPV	249	#define CONFIG_SYS_PCI_HOLD_DEL 0x20 /* delay and hold timing - 133MHz only */
80885a9d WD	250	#endif
	251
	252	/* Bit-field values for MIOCR1. */
	253	#if !defined (CONFIG_133MHZ_DRAM)
6d0f6bcf	254	#define CONFIG_SYS_DLL_MAX_DELAY 0x04 /* longer DLL delay line - 66MHz only */
80885a9d WD	255	#endif
80885a9d WD	256	/* Bit-field values for MIOCR2. */
6d0f6bcf	257	#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay */
80885a9d WD	258	/* - note bottom 3 bits MUST be 0 */
	259	#endif
	260
	261	/* Bit-field values for MCCR1. */
6d0f6bcf JCPV	262	#define CONFIG_SYS_ROMNAL 7 /rom/flash next access time /
6d0f6bcf JCPV	263	#define CONFIG_SYS_ROMFAL 11 /rom/flash access time /
80885a9d WD	264
80885a9d WD	265	/* Bit-field values for MCCR2. */
6d0f6bcf	266	#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */
80885a9d	267	#if defined (CONFIG_133MHZ_DRAM)
6d0f6bcf	268	#define CONFIG_SYS_REFINT 1300 /* no of clock cycles between CBR */
80885a9d	269	#else /* refresh cycles */
6d0f6bcf	270	#define CONFIG_SYS_REFINT 750
80885a9d WD	271	#endif
	272
	273	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
	274	#if defined (CONFIG_133MHZ_DRAM)
6d0f6bcf	275	#define CONFIG_SYS_BSTOPRE 1023
80885a9d	276	#else
6d0f6bcf	277	#define CONFIG_SYS_BSTOPRE 250
80885a9d WD	278	#endif
	279
	280	/* Bit-field values for MCCR3. */
	281	/* the following are for SDRAM only */
	282
	283	#if defined (CONFIG_133MHZ_DRAM)
6d0f6bcf	284	#define CONFIG_SYS_REFREC 9 /* Refresh to activate interval */
80885a9d	285	#else
6d0f6bcf	286	#define CONFIG_SYS_REFREC 5 /* Refresh to activate interval */
80885a9d WD	287	#endif
80885a9d WD	288	#if defined (CONFIG_MPC8240)
6d0f6bcf	289	#define CONFIG_SYS_RDLAT 2 /* data latency from read command */
80885a9d WD	290	#endif
	291
	292	/* Bit-field values for MCCR4. */
	293	#if defined (CONFIG_133MHZ_DRAM)
6d0f6bcf JCPV	294	#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
	295	#define CONFIG_SYS_ACTTOPRE 7 /* Activate to Precharge interval */
	296	#define CONFIG_SYS_ACTORW 5 /* Activate to R/W */
	297	#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
80885a9d WD	298	#else
80885a9d WD	299	#if 0
6d0f6bcf JCPV	300	#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
	301	#define CONFIG_SYS_ACTTOPRE 3 /* Activate to Precharge interval */
	302	#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
	303	#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latency */
80885a9d	304	#endif
6d0f6bcf JCPV	305	#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
	306	#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
	307	#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
	308	#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
80885a9d	309	#endif
6d0f6bcf JCPV	310	#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
	311	#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length 2=4, 3=8 */
	312	#define CONFIG_SYS_REGDIMM 0
80885a9d	313	#if defined (CONFIG_MPC8240)
6d0f6bcf	314	#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 0
80885a9d	315	#elif defined (CONFIG_MPC8245)
6d0f6bcf JCPV	316	#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
6d0f6bcf JCPV	317	#define CONFIG_SYS_EXTROM 0
80885a9d WD	318	#else
	319	#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
	320	#endif
	321
	322
	323	/*-----------------------------------------------------------------------
	324	memory bank settings
	325	* only bits 20-29 are actually used from these vales to set the
	326	* start/end address the upper two bits will be 0, and the lower 20
	327	* bits will be set to 0x00000 for a start address, or 0xfffff for an
	328	* end address
	329	*/
6d0f6bcf JCPV	330	#define CONFIG_SYS_BANK0_START 0x00000000
	331	#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
	332	#define CONFIG_SYS_BANK0_ENABLE 1
	333	#define CONFIG_SYS_BANK1_START 0x3ff00000
	334	#define CONFIG_SYS_BANK1_END 0x3fffffff
	335	#define CONFIG_SYS_BANK1_ENABLE 0
	336	#define CONFIG_SYS_BANK2_START 0x3ff00000
	337	#define CONFIG_SYS_BANK2_END 0x3fffffff
	338	#define CONFIG_SYS_BANK2_ENABLE 0
	339	#define CONFIG_SYS_BANK3_START 0x3ff00000
	340	#define CONFIG_SYS_BANK3_END 0x3fffffff
	341	#define CONFIG_SYS_BANK3_ENABLE 0
	342	#define CONFIG_SYS_BANK4_START 0x00000000
	343	#define CONFIG_SYS_BANK4_END 0x00000000
	344	#define CONFIG_SYS_BANK4_ENABLE 0
	345	#define CONFIG_SYS_BANK5_START 0x00000000
	346	#define CONFIG_SYS_BANK5_END 0x00000000
	347	#define CONFIG_SYS_BANK5_ENABLE 0
	348	#define CONFIG_SYS_BANK6_START 0x00000000
	349	#define CONFIG_SYS_BANK6_END 0x00000000
	350	#define CONFIG_SYS_BANK6_ENABLE 0
	351	#define CONFIG_SYS_BANK7_START 0x00000000
	352	#define CONFIG_SYS_BANK7_END 0x00000000
	353	#define CONFIG_SYS_BANK7_ENABLE 0
80885a9d WD	354
	355	/*-----------------------------------------------------------------------
	356	* Memory bank enable bitmask, specifying which of the banks defined above
	357	are actually present. MSB is for bank #7, LSB is for bank #0.
	358	*/
6d0f6bcf	359	#define CONFIG_SYS_BANK_ENABLE 0x01
80885a9d WD	360
80885a9d WD	361	#if defined (CONFIG_MPC8240)
6d0f6bcf	362	#define CONFIG_SYS_ODCR 0xDF /* configures line driver impedances, */
80885a9d WD	363	/* see 8240 book for bit definitions */
	364	#elif defined (CONFIG_MPC8245)
	365	#if defined (CONFIG_133MHZ_DRAM)
6d0f6bcf	366	#define CONFIG_SYS_ODCR 0xFE /* configures line driver impedances - 133MHz */
80885a9d	367	#else
6d0f6bcf	368	#define CONFIG_SYS_ODCR 0xDE /* configures line driver impedances - 66MHz */
80885a9d WD	369	#endif
	370	#else
	371	#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
	372	#endif
	373
6d0f6bcf	374	#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
80885a9d WD	375	/* currently accessed page in memory */
	376	/* see 8240 book for details */
	377
	378	/*-----------------------------------------------------------------------
	379	* Block Address Translation (BAT) register settings.
	380	*/
	381	/* SDRAM 0 - 256MB */
6d0f6bcf JCPV	382	#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \| BATL_PP_10 \| BATL_MEMCOHERENCE)
6d0f6bcf JCPV	383	#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \| BATU_BL_256M \| BATU_VS \| BATU_VP)
80885a9d WD	384
80885a9d WD	385	/* stack in DCACHE @ 1GB (no backing mem) */
6d0f6bcf JCPV	386	#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR \| BATL_PP_10 \| BATL_MEMCOHERENCE)
6d0f6bcf JCPV	387	#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR \| BATU_BL_128K \| BATU_VS \| BATU_VP)
80885a9d WD	388
80885a9d WD	389	/* PCI memory */
6d0f6bcf JCPV	390	#define CONFIG_SYS_IBAT2L (0x80000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
6d0f6bcf JCPV	391	#define CONFIG_SYS_IBAT2U (0x80000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)
80885a9d WD	392
80885a9d WD	393	/* Flash, config addrs, etc */
6d0f6bcf JCPV	394	#define CONFIG_SYS_IBAT3L (0xF0000000 \| BATL_PP_10 \| BATL_CACHEINHIBIT)
6d0f6bcf JCPV	395	#define CONFIG_SYS_IBAT3U (0xF0000000 \| BATU_BL_256M \| BATU_VS \| BATU_VP)
80885a9d	396
6d0f6bcf JCPV	397	#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
	398	#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
	399	#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
	400	#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
	401	#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
	402	#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
	403	#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
	404	#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
80885a9d WD	405
	406
	407	/*-----------------------------------------------------------------------
	408	* Cache Configuration
	409	*/
6d0f6bcf	410	#define CONFIG_SYS_CACHELINE_SIZE 32
1bec3d30	411	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	412	# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
80885a9d WD	413	#endif
	414
	415
	416	/*-----------------------------------------------------------------------
	417	* Internal Definitions
	418	*
	419	* Boot Flags
	420	*/
	421	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	422	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	423
	424
	425	/* values according to the manual */
	426	#define CONFIG_DRAM_50MHZ 1
	427	#define CONFIG_SDRAM_50MHZ
	428
	429	#undef NR_8259_INTS
	430	#define NR_8259_INTS 1
	431
	432	/*-----------------------------------------------------------------------
	433	* IDE/ATA stuff
	434	*/
6d0f6bcf JCPV	435	#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */
6d0f6bcf JCPV	436	#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS1) / max. 2 drives per IDE bus */
80885a9d	437
6d0f6bcf JCPV	438	#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO /* base address */
	439	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
	440	#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
	441	#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
	442	#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
	443	#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
80885a9d WD	444
	445	#define CONFIG_ATAPI
	446
	447	#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
	448	#undef CONFIG_IDE_LED /* no led for ide supported */
	449	#undef CONFIG_IDE_RESET /* reset for ide supported... */
	450	#undef CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
	451
	452	/*-----------------------------------------------------------------------
	453	* DISK Partition support
	454	*/
	455	#define CONFIG_DOS_PARTITION
	456
	457	/*-----------------------------------------------------------------------
	458	* For booting Linux, the board info and command line data
	459	* have to be in the first 8 MB of memory, since this is
	460	* the maximum mapped by the Linux kernel during initialization.
	461	*/
6d0f6bcf	462	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
80885a9d WD	463
80885a9d WD	464	#endif /* __CONFIG_H */