]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/goflexhome.h
configs: Migrate CMD_NAND*
[people/ms/u-boot.git] / include / configs / goflexhome.h
CommitLineData
0ad6c34c
SR
1/*
2 * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
3 *
4 * Based on dockstar.h originally written by
5 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
6 *
7 * Based on sheevaplug.h originally written by
8 * Prafulla Wadaskar <prafulla@marvell.com>
9 * (C) Copyright 2009
10 * Marvell Semiconductor <www.marvell.com>
11 *
1a459660 12 * SPDX-License-Identifier: GPL-2.0+
0ad6c34c
SR
13 */
14
15#ifndef _CONFIG_GOFLEXHOME_H
16#define _CONFIG_GOFLEXHOME_H
17
0ad6c34c
SR
18/*
19 * High Level Configuration Options (easy to change)
20 */
21#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
0ad6c34c
SR
22#define CONFIG_KW88F6281 1 /* SOC Name */
23#define CONFIG_MACH_GOFLEXHOME /* Machine type */
24#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
25
26/*
27 * Default GPIO configuration and LED status
28 */
29#define GOFLEXHOME_OE_LOW (~(0))
30#define GOFLEXHOME_OE_HIGH (~(0))
31#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
32#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
33
34/* PHY related */
35#define MV88E1116_LED_FCTRL_REG 10
36#define MV88E1116_CPRSP_CR3_REG 21
37#define MV88E1116_MAC_CTRL_REG 21
38#define MV88E1116_PGADR_REG 22
39#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
40#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
41
42/*
43 * Commands configuration
44 */
0ad6c34c 45
0ad6c34c
SR
46#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
47
48/*
49 * mv-common.h should be defined after CMD configs since it used them
50 * to enable certain macros
51 */
52#include "mv-common.h"
53
0ad6c34c
SR
54/*
55 * Environment variables configurations
56 */
57#ifdef CONFIG_CMD_NAND
0ad6c34c 58#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
0ad6c34c
SR
59#endif
60/*
61 * max 4k env size is enough, but in case of nand
62 * it has to be rounded to sector size
63 */
64#define CONFIG_ENV_SIZE 0x20000 /* 128k */
65#define CONFIG_ENV_ADDR 0xC0000
66#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
67
68/*
69 * Default environment variables
70 */
71#define CONFIG_BOOTCOMMAND \
72 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
73 "ubi part root; " \
74 "ubifsmount ubi:root; " \
75 "ubifsload 0x800000 ${kernel}; " \
76 "bootm 0x800000"
77
78#define CONFIG_MTDPARTS \
79 "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
80
81#define CONFIG_EXTRA_ENV_SETTINGS \
82 "console=console=ttyS0,115200\0" \
83 "mtdids=nand0=orion_nand\0" \
84 "mtdparts="CONFIG_MTDPARTS \
85 "kernel=/boot/uImage\0" \
86 "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
87
88/*
89 * Ethernet Driver configuration
90 */
91#ifdef CONFIG_CMD_NET
92#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
93#define CONFIG_PHY_BASE_ADR 0
94#endif /* CONFIG_CMD_NET */
95
96/*
97 * * SATA Driver configuration
98 * */
99#ifdef CONFIG_MVSATA_IDE
100#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
101#endif /*CONFIG_MVSATA_IDE*/
102
103/*
104 * * RTC driver configuration
105 * */
106#ifdef CONFIG_CMD_DATE
107#define CONFIG_RTC_MV
108#endif /* CONFIG_CMD_DATE */
109
110#endif /* _CONFIG_GOFLEXHOME_H */