[people/ms/u-boot.git] / include / configs / gw_ventana.h

/*
 * Copyright (C) 2013 Gateworks Corporation
 *
 * SPDX-License-Identifier: GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SPL */
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)

/* Falcon Mode */
#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000

/* Falcon Mode - NAND support: args@17MB kernel@18MB */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	(18 * SZ_1M)

/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x800	/* 1MB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x1000	/* 2MB */

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"
#define CONFIG_DISPLAY_BOARDINFO_LATE

#define CONFIG_MACH_TYPE	4520   /* Gateworks Ventana Platform */

/* Serial ATAG */
#define CONFIG_SERIAL_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

/* Init Functions */
#define CONFIG_MISC_INIT_R

/* Driver Model */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_DM_GPIO
#define CONFIG_DM_THERMAL
#endif

/* Thermal */
#define CONFIG_IMX_THERMAL

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_SPI_FLASH

/* SPI */
#ifdef CONFIG_CMD_SF
  #define CONFIG_MXC_SPI
  #define CONFIG_SPI_FLASH_MTD
  #define CONFIG_SPI_FLASH_BAR
  #define CONFIG_SF_DEFAULT_BUS              0
  #define CONFIG_SF_DEFAULT_CS               0
					     /* GPIO 3-19 (21248) */
  #define CONFIG_SF_DEFAULT_SPEED            30000000
  #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
#endif

#elif defined(CONFIG_SPL_NAND_SUPPORT)
/* Enable NAND support */
#ifdef CONFIG_CMD_NAND
  #define CONFIG_NAND_MXS
  #define CONFIG_SYS_MAX_NAND_DEVICE	1
  #define CONFIG_SYS_NAND_BASE		0x40000000
  #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  #define CONFIG_SYS_NAND_ONFI_DETECTION

  /* DMA stuff, needed for GPMI/MXS NAND support */
  #define CONFIG_APBH_DMA
  #define CONFIG_APBH_DMA_BURST
  #define CONFIG_APBH_DMA_BURST8
#endif

#endif /* CONFIG_SPI_FLASH */

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_GSC			0
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

/* eMMC Configs */
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SUPPORT_EMMC_RPMB

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
  #define CONFIG_DWC_AHSATA
  #define CONFIG_SYS_SATA_MAX_DEVICE	1
  #define CONFIG_DWC_AHSATA_PORT_ID	0
  #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
  #define CONFIG_LBA48
  #define CONFIG_LIBATA
#endif

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#endif

/*
 * PMIC
 */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
#define CONFIG_POWER_LTC3676
#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c

/* Various command support */
#define CONFIG_CMD_UNZIP         /* gzwrite */

/* Ethernet support */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE             ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE      RGMII
#define CONFIG_FEC_MXC_PHYADDR   0
#define CONFIG_ARP_TIMEOUT       200UL

/* USB Configs */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
#define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS      0
#define CONFIG_USBD_HS
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

/* USB Mass Storage Gadget */
#define CONFIG_USB_FUNCTION_MASS_STORAGE

/* Framebuffer and LCD */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK          260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_HIDE_LOGO_VERSION  /* Custom config to hide U-boot version */

/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
#define CONFIG_PREBOOT

/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/*
 * MTD Command for mtdparts
 */
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#ifdef CONFIG_SPI_FLASH
#define MTDIDS_DEFAULT    "nor0=nor"
#define MTDPARTS_DEFAULT  \
	"mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
#else
#define MTDIDS_DEFAULT    "nand0=nand"
#define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
#endif

/* Persistent Environment Config */
#if defined(CONFIG_ENV_IS_IN_MMC)
  #define CONFIG_SYS_MMC_ENV_DEV         0
  #define CONFIG_SYS_MMC_ENV_PART        1
  #define CONFIG_ENV_OFFSET              (709 * SZ_1K)
  #define CONFIG_ENV_SIZE                (128 * SZ_1K)
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (128 * SZ_1K))
#elif defined(CONFIG_ENV_IS_IN_NAND)
  #define CONFIG_ENV_OFFSET              (16 * SZ_1M)
  #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
  #define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
  #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + (512 * SZ_1K))
  #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
  #define CONFIG_ENV_OFFSET		(512 * SZ_1K)
  #define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
  #define CONFIG_ENV_SIZE		(8 * SZ_1K)
  #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
  #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
  #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
  #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#endif

/* Environment */
#define CONFIG_IPADDR             192.168.1.1
#define CONFIG_SERVERIP           192.168.1.146

#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"pcidisable=1\0" \
	"splashpos=m,m\0" \
	"usb_pgood_delay=2000\0" \
	"console=ttymxc1\0" \
	"bootdevs=usb mmc sata flash\0" \
	"hwconfig=_UNKNOWN_\0" \
	"video=\0" \
	\
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"disk=0\0" \
	"part=1\0" \
	\
	"fdt_high=0xffffffff\0" \
	"fdt_addr=0x18000000\0" \
	"initrd_high=0xffffffff\0" \
	"fixfdt=" \
		"fdt addr ${fdt_addr}\0" \
	"bootdir=boot\0" \
	"loadfdt=" \
		"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
			"run fixfdt; " \
		"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
			"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
			"run fixfdt; " \
		"fi\0" \
	\
	"fs=ext4\0" \
	"script=6x_bootscript-ventana\0" \
	"loadscript=" \
		"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
			"source ${loadaddr}; " \
		"fi\0" \
	\
	"uimage=uImage\0" \
	"mmc_root=mmcblk0p1\0" \
	"mmc_boot=" \
		"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
		"mmc dev ${disk} && mmc rescan && " \
		"setenv dtype mmc; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/${mmc_root} rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	\
	"sata_boot=" \
		"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
		"sata init && " \
		"setenv dtype sata; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0" \
	"usb_boot=" \
		"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
		"usb start && usb dev ${disk} && " \
		"setenv dtype usb; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/sda1 rootfstype=${fs} " \
				"rootwait rw ${video} ${extra}; " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"bootm; " \
			"fi; " \
		"fi\0"

#ifdef CONFIG_SPI_FLASH
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	"image_uboot=ventana/u-boot_spi.imx\0" \
	\
	"spi_koffset=0x90000\0" \
	"spi_klen=0x200000\0" \
	\
	"spi_updateuboot=echo Updating uboot from " \
		"${serverip}:${image_uboot}...; " \
		"tftpboot ${loadaddr} ${image_uboot} && " \
		"sf probe && sf erase 0 80000 && " \
			"sf write ${loadaddr} 400 ${filesize}\0" \
	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
		"to ${spi_koffset} ...; " \
		"tftp ${loadaddr} ${image_os} && " \
		"sf probe && " \
		"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	\
	"flash_boot=" \
		"if sf probe && " \
		"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=/dev/mtdblock3 " \
				"rootfstype=squashfs,jffs2 " \
				"${video} ${extra}; " \
			"bootm; " \
		"fi\0"
#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	\
	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
		"tftp ${loadaddr} ${image_rootfs} && " \
		"nand erase.part rootfs && " \
		"nand write ${loadaddr} rootfs ${filesize}\0" \
	\
	"flash_boot=" \
		"setenv fsload 'ubifsload'; " \
		"ubi part rootfs; " \
		"if ubi check boot; then " \
			"ubifsmount ubi0:boot; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=squashfs,ubifs; " \
			"setenv bootdir; " \
		"elif ubi check rootfs; then " \
			"ubifsmount ubi0:rootfs; " \
			"setenv root ubi0:rootfs ubi.mtd=2 " \
				"rootfstype=ubifs; " \
		"fi; " \
		"setenv dtype nand; run loadscript; " \
		"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
			"setenv bootargs console=${console},${baudrate} " \
				"root=${root} ${video} ${extra}; " \
			"if run loadfdt; then " \
				"ubifsumount; " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"ubifsumount; bootm; " \
			"fi; " \
		"fi\0"
#endif

#define CONFIG_BOOTCOMMAND \
	"for btype in ${bootdevs}; do " \
		"echo; echo Attempting ${btype} boot...; " \
		"if run ${btype}_boot; then; fi; " \
	"done"

#endif			       /* __CONFIG_H */
Commit	Line	Data
59189a8b TH	1	/*
	2	* Copyright (C) 2013 Gateworks Corporation
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
0cc11dea	10	/* SPL */
0cc11dea	11	/* Location in NAND to read U-Boot from */
55ff55e9	12	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
0cc11dea	13
53940a50	14	/* Falcon Mode */
53940a50	15	#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
53940a50 TH	16
53940a50 TH	17	/* Falcon Mode - NAND support: args@17MB kernel@18MB */
53940a50 TH	18	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
	19
	20	/* Falcon Mode - MMC support: args@1MB kernel@2MB */
	21	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
	22	#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
	23	#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
	24
0cc11dea	25	#include "imx6_spl.h" /* common IMX6 SPL configuration */
59189a8b	26	#include "mx6_common.h"
6eab98a0	27	#define CONFIG_DISPLAY_BOARDINFO_LATE
59189a8b TH	28
	29	#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
	30
ea690917	31	/* Serial ATAG */
59189a8b	32	#define CONFIG_SERIAL_TAG
59189a8b TH	33
59189a8b TH	34	/* Size of malloc() pool */
55ff55e9	35	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
59189a8b TH	36
59189a8b TH	37	/* Init Functions */
59189a8b TH	38	#define CONFIG_MISC_INIT_R
59189a8b TH	39
e1b4770c TH	40	/* Driver Model */
e1b4770c TH	41	#ifndef CONFIG_SPL_BUILD
e1b4770c	42	#define CONFIG_DM_GPIO
50de5088	43	#define CONFIG_DM_THERMAL
e1b4770c TH	44	#endif
e1b4770c TH	45
50de5088	46	/* Thermal */
1368f993	47	#define CONFIG_IMX_THERMAL
50de5088	48
59189a8b TH	49	/* Serial */
	50	#define CONFIG_MXC_UART
	51	#define CONFIG_MXC_UART_BASE UART2_BASE
	52
	53	#ifdef CONFIG_SPI_FLASH
	54
	55	/* SPI */
59189a8b TH	56	#ifdef CONFIG_CMD_SF
	57	#define CONFIG_MXC_SPI
	58	#define CONFIG_SPI_FLASH_MTD
	59	#define CONFIG_SPI_FLASH_BAR
59189a8b	60	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	61	#define CONFIG_SF_DEFAULT_CS 0
59189a8b TH	62	/* GPIO 3-19 (21248) */
	63	#define CONFIG_SF_DEFAULT_SPEED 30000000
	64	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	65	#endif
	66
d883fcc6	67	#elif defined(CONFIG_SPL_NAND_SUPPORT)
59189a8b	68	/* Enable NAND support */
59189a8b TH	69	#ifdef CONFIG_CMD_NAND
	70	#define CONFIG_NAND_MXS
	71	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	72	#define CONFIG_SYS_NAND_BASE 0x40000000
	73	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	74	#define CONFIG_SYS_NAND_ONFI_DETECTION
	75
	76	/* DMA stuff, needed for GPMI/MXS NAND support */
	77	#define CONFIG_APBH_DMA
	78	#define CONFIG_APBH_DMA_BURST
	79	#define CONFIG_APBH_DMA_BURST8
	80	#endif
	81
	82	#endif /* CONFIG_SPI_FLASH */
	83
59189a8b	84	/* I2C Configs */
59189a8b TH	85	#define CONFIG_SYS_I2C
59189a8b TH	86	#define CONFIG_SYS_I2C_MXC
03544c66 AA	87	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	88	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	89	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
9c0fe83e TH	90	#define CONFIG_SYS_I2C_SPEED 100000
9c0fe83e TH	91	#define CONFIG_I2C_GSC 0
f6747cda	92	#define CONFIG_I2C_EDID
59189a8b TH	93
59189a8b TH	94	/* MMC Configs */
59189a8b	95	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
59189a8b	96
1faca6ad TH	97	/* eMMC Configs */
	98	#define CONFIG_SUPPORT_EMMC_BOOT
	99	#define CONFIG_SUPPORT_EMMC_RPMB
	100
59189a8b TH	101	/*
	102	* SATA Configs
	103	*/
59189a8b TH	104	#ifdef CONFIG_CMD_SATA
	105	#define CONFIG_DWC_AHSATA
	106	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	107	#define CONFIG_DWC_AHSATA_PORT_ID 0
	108	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	109	#define CONFIG_LBA48
	110	#define CONFIG_LIBATA
	111	#endif
	112
	113	/*
	114	* PCI express
	115	*/
59189a8b	116	#ifdef CONFIG_CMD_PCI
59189a8b	117	#define CONFIG_PCI_SCAN_SHOW
dad08286	118	#define CONFIG_PCI_FIXUP_DEV
59189a8b TH	119	#define CONFIG_PCIE_IMX
	120	#endif
	121
	122	/*
	123	* PMIC
	124	*/
	125	#define CONFIG_POWER
	126	#define CONFIG_POWER_I2C
	127	#define CONFIG_POWER_PFUZE100
	128	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
234d89da TH	129	#define CONFIG_POWER_LTC3676
234d89da TH	130	#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
59189a8b TH	131
59189a8b TH	132	/* Various command support */
f7d9fcd1	133	#define CONFIG_CMD_UNZIP /* gzwrite */
59189a8b TH	134
	135	/* Ethernet support */
	136	#define CONFIG_FEC_MXC
	137	#define CONFIG_MII
	138	#define IMX_FEC_BASE ENET_BASE_ADDR
	139	#define CONFIG_FEC_XCV_TYPE RGMII
59189a8b	140	#define CONFIG_FEC_MXC_PHYADDR 0
59189a8b TH	141	#define CONFIG_ARP_TIMEOUT 200UL
	142
	143	/* USB Configs */
59189a8b TH	144	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	145	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	146	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	147	#define CONFIG_MXC_USB_FLAGS 0
59189a8b	148	#define CONFIG_USBD_HS
59189a8b TH	149	#define CONFIG_USB_ETHER
	150	#define CONFIG_USB_ETH_CDC
	151	#define CONFIG_NETCONSOLE
59189a8b	152
9543e954	153	/* USB Mass Storage Gadget */
01acd6ab	154	#define CONFIG_USB_FUNCTION_MASS_STORAGE
9543e954	155
7a278f9f	156	/* Framebuffer and LCD */
7a278f9f	157	#define CONFIG_VIDEO_IPUV3
7a278f9f TH	158	#define CONFIG_VIDEO_LOGO
7a278f9f TH	159	#define CONFIG_IPUV3_CLK 260000000
7a278f9f TH	160	#define CONFIG_IMX_HDMI
7a278f9f TH	161	#define CONFIG_IMX_VIDEO_SKIP
0a22c7f0 TH	162	#define CONFIG_VIDEO_BMP_LOGO
	163	#define CONFIG_SPLASH_SCREEN_ALIGN
	164	#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
7a278f9f	165
59189a8b	166	/* Miscellaneous configurable options */
59189a8b	167	#define CONFIG_HWCONFIG
899f589b	168	#define CONFIG_PREBOOT
59189a8b	169
59189a8b TH	170	/* Memory configuration */
	171	#define CONFIG_SYS_MEMTEST_START 0x10000000
	172	#define CONFIG_SYS_MEMTEST_END 0x10010000
	173	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
59189a8b TH	174
	175	/* Physical Memory Map */
	176	#define CONFIG_NR_DRAM_BANKS 1
	177	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	178	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	179	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	180	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	181
	182	#define CONFIG_SYS_INIT_SP_OFFSET \
	183	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	184	#define CONFIG_SYS_INIT_SP_ADDR \
	185	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	186
59189a8b TH	187	/*
	188	* MTD Command for mtdparts
	189	*/
59189a8b TH	190	#define CONFIG_MTD_DEVICE
	191	#define CONFIG_MTD_PARTITIONS
	192	#ifdef CONFIG_SPI_FLASH
	193	#define MTDIDS_DEFAULT "nor0=nor"
	194	#define MTDPARTS_DEFAULT \
	195	"mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
	196	#else
	197	#define MTDIDS_DEFAULT "nand0=nand"
	198	#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
	199	#endif
	200
	201	/* Persistent Environment Config */
59189a8b	202	#if defined(CONFIG_ENV_IS_IN_MMC)
59189a8b	203	#define CONFIG_SYS_MMC_ENV_DEV 0
b69999ef	204	#define CONFIG_SYS_MMC_ENV_PART 1
0a9c2150 TH	205	#define CONFIG_ENV_OFFSET (709 * SZ_1K)
	206	#define CONFIG_ENV_SIZE (128 * SZ_1K)
	207	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
59189a8b	208	#elif defined(CONFIG_ENV_IS_IN_NAND)
55ff55e9 TH	209	#define CONFIG_ENV_OFFSET (16 * SZ_1M)
55ff55e9 TH	210	#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
59189a8b	211	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
55ff55e9	212	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
59189a8b TH	213	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
59189a8b TH	214	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
55ff55e9 TH	215	#define CONFIG_ENV_OFFSET (512 * SZ_1K)
	216	#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
	217	#define CONFIG_ENV_SIZE (8 * SZ_1K)
59189a8b TH	218	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	219	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	220	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	221	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	222	#endif
	223
	224	/* Environment */
59189a8b TH	225	#define CONFIG_IPADDR 192.168.1.1
59189a8b TH	226	#define CONFIG_SERVERIP 192.168.1.146
59189a8b TH	227
59189a8b TH	228	#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
f4416579	229	"pcidisable=1\0" \
0a22c7f0	230	"splashpos=m,m\0" \
04171690	231	"usb_pgood_delay=2000\0" \
59189a8b TH	232	"console=ttymxc1\0" \
59189a8b TH	233	"bootdevs=usb mmc sata flash\0" \
5911c092	234	"hwconfig=_UNKNOWN_\0" \
59189a8b TH	235	"video=\0" \
	236	\
	237	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	238	"mtdids=" MTDIDS_DEFAULT "\0" \
7698cdfd TH	239	"disk=0\0" \
7698cdfd TH	240	"part=1\0" \
59189a8b TH	241	\
	242	"fdt_high=0xffffffff\0" \
	243	"fdt_addr=0x18000000\0" \
8cc25eb8	244	"initrd_high=0xffffffff\0" \
4df0bff3 TH	245	"fixfdt=" \
4df0bff3 TH	246	"fdt addr ${fdt_addr}\0" \
e2801a96	247	"bootdir=boot\0" \
59189a8b	248	"loadfdt=" \
1b740001 TH	249	"if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
1b740001 TH	250	"echo Loaded DTB from ${bootdir}/${fdt_file}; " \
4df0bff3	251	"run fixfdt; " \
1b740001 TH	252	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
1b740001 TH	253	"echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
4df0bff3	254	"run fixfdt; " \
1b740001 TH	255	"elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
1b740001 TH	256	"echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
4df0bff3	257	"run fixfdt; " \
59189a8b TH	258	"fi\0" \
59189a8b TH	259	\
543a4aba	260	"fs=ext4\0" \
e2801a96	261	"script=6x_bootscript-ventana\0" \
59189a8b	262	"loadscript=" \
e2801a96	263	"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
50987095	264	"source ${loadaddr}; " \
59189a8b TH	265	"fi\0" \
59189a8b TH	266	\
e2801a96	267	"uimage=uImage\0" \
79942c4f	268	"mmc_root=mmcblk0p1\0" \
59189a8b	269	"mmc_boot=" \
543a4aba	270	"setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
7698cdfd	271	"mmc dev ${disk} && mmc rescan && " \
560e8b3f	272	"setenv dtype mmc; run loadscript; " \
e2801a96	273	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	274	"setenv bootargs console=${console},${baudrate} " \
79942c4f	275	"root=/dev/${mmc_root} rootfstype=${fs} " \
59189a8b	276	"rootwait rw ${video} ${extra}; " \
4df0bff3	277	"if run loadfdt; then " \
59189a8b TH	278	"bootm ${loadaddr} - ${fdt_addr}; " \
	279	"else " \
	280	"bootm; " \
	281	"fi; " \
	282	"fi\0" \
	283	\
	284	"sata_boot=" \
543a4aba	285	"setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
7698cdfd	286	"sata init && " \
560e8b3f	287	"setenv dtype sata; run loadscript; " \
e2801a96	288	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	289	"setenv bootargs console=${console},${baudrate} " \
543a4aba	290	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	291	"rootwait rw ${video} ${extra}; " \
4df0bff3	292	"if run loadfdt; then " \
59189a8b TH	293	"bootm ${loadaddr} - ${fdt_addr}; " \
	294	"else " \
	295	"bootm; " \
	296	"fi; " \
	297	"fi\0" \
	298	"usb_boot=" \
543a4aba	299	"setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
7698cdfd	300	"usb start && usb dev ${disk} && " \
560e8b3f	301	"setenv dtype usb; run loadscript; " \
e2801a96	302	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	303	"setenv bootargs console=${console},${baudrate} " \
543a4aba	304	"root=/dev/sda1 rootfstype=${fs} " \
59189a8b	305	"rootwait rw ${video} ${extra}; " \
4df0bff3	306	"if run loadfdt; then " \
59189a8b TH	307	"bootm ${loadaddr} - ${fdt_addr}; " \
	308	"else " \
	309	"bootm; " \
	310	"fi; " \
	311	"fi\0"
	312
	313	#ifdef CONFIG_SPI_FLASH
	314	#define CONFIG_EXTRA_ENV_SETTINGS \
	315	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
	316	"image_os=ventana/openwrt-imx6-imx6q-gw5400-a-squashfs.bin\0" \
	317	"image_uboot=ventana/u-boot_spi.imx\0" \
	318	\
	319	"spi_koffset=0x90000\0" \
	320	"spi_klen=0x200000\0" \
	321	\
	322	"spi_updateuboot=echo Updating uboot from " \
	323	"${serverip}:${image_uboot}...; " \
	324	"tftpboot ${loadaddr} ${image_uboot} && " \
	325	"sf probe && sf erase 0 80000 && " \
	326	"sf write ${loadaddr} 400 ${filesize}\0" \
	327	"spi_update=echo Updating OS from ${serverip}:${image_os} " \
	328	"to ${spi_koffset} ...; " \
	329	"tftp ${loadaddr} ${image_os} && " \
	330	"sf probe && " \
	331	"sf update ${loadaddr} ${spi_koffset} ${filesize}\0" \
	332	\
	333	"flash_boot=" \
	334	"if sf probe && " \
	335	"sf read ${loadaddr} ${spi_koffset} ${spi_klen}; then " \
	336	"setenv bootargs console=${console},${baudrate} " \
	337	"root=/dev/mtdblock3 " \
	338	"rootfstype=squashfs,jffs2 " \
	339	"${video} ${extra}; " \
	340	"bootm; " \
	341	"fi\0"
	342	#else
	343	#define CONFIG_EXTRA_ENV_SETTINGS \
	344	CONFIG_EXTRA_ENV_SETTINGS_COMMON \
59189a8b	345	\
e2801a96	346	"image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
59189a8b TH	347	"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
	348	"tftp ${loadaddr} ${image_rootfs} && " \
	349	"nand erase.part rootfs && " \
	350	"nand write ${loadaddr} rootfs ${filesize}\0" \
	351	\
	352	"flash_boot=" \
	353	"setenv fsload 'ubifsload'; " \
e2801a96 TH	354	"ubi part rootfs; " \
	355	"if ubi check boot; then " \
	356	"ubifsmount ubi0:boot; " \
	357	"setenv root ubi0:rootfs ubi.mtd=2 " \
	358	"rootfstype=squashfs,ubifs; " \
	359	"setenv bootdir; " \
	360	"elif ubi check rootfs; then " \
	361	"ubifsmount ubi0:rootfs; " \
	362	"setenv root ubi0:rootfs ubi.mtd=2 " \
	363	"rootfstype=ubifs; " \
	364	"fi; " \
560e8b3f	365	"setenv dtype nand; run loadscript; " \
e2801a96	366	"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
59189a8b	367	"setenv bootargs console=${console},${baudrate} " \
e2801a96	368	"root=${root} ${video} ${extra}; " \
4df0bff3	369	"if run loadfdt; then " \
59189a8b TH	370	"ubifsumount; " \
	371	"bootm ${loadaddr} - ${fdt_addr}; " \
	372	"else " \
	373	"ubifsumount; bootm; " \
	374	"fi; " \
	375	"fi\0"
	376	#endif
	377
	378	#define CONFIG_BOOTCOMMAND \
	379	"for btype in ${bootdevs}; do " \
	380	"echo; echo Attempting ${btype} boot...; " \
	381	"if run ${btype}_boot; then; fi; " \
	382	"done"
	383
59189a8b	384	#endif /* __CONFIG_H */