[people/ms/u-boot.git] / include / configs / ids8313.h

/*
 * (C) Copyright 2013
 * Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * Copyright (c) 2011 IDS GmbH, Germany
 * Sergej Stepanov <ste@ids.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_MPC831x
#define CONFIG_MPC8313
#define CONFIG_IDS8313

#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_FSL_ELBC

#define CONFIG_MISC_INIT_R

#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_PROMPT	\
	"\nEnter password - autoboot in %d seconds...\n", CONFIG_BOOTDELAY
#define CONFIG_AUTOBOOT_DELAY_STR	"ids"
#define CONFIG_BOOT_RETRY_TIME		900
#define CONFIG_BOOT_RETRY_MIN		30
#define CONFIG_BOOTDELAY		1
#define CONFIG_RESET_TO_RETRY

#define CONFIG_83XX_CLKIN		66000000	/* in Hz */
#define CONFIG_SYS_CLK_FREQ		CONFIG_83XX_CLKIN

#define CONFIG_SYS_IMMR		0xF0000000

#define CONFIG_SYS_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
#define CONFIG_SYS_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */

/*
 * Hardware Reset Configuration Word
 * if CLKIN is 66.000MHz, then
 * CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
 */
#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ |\
			     HRCWL_DDR_TO_SCB_CLK_2X1 |\
			     HRCWL_CSB_TO_CLKIN_2X1 |\
			     HRCWL_CORE_TO_CSB_2X1)

#define CONFIG_SYS_HRCW_HIGH	(HRCWH_PCI_HOST |\
				 HRCWH_CORE_ENABLE |\
				 HRCWH_FROM_0XFFF00100 |\
				 HRCWH_BOOTSEQ_DISABLE |\
				 HRCWH_SW_WATCHDOG_DISABLE |\
				 HRCWH_ROM_LOC_LOCAL_8BIT |\
				 HRCWH_RL_EXT_LEGACY |\
				 HRCWH_TSEC1M_IN_MII |\
				 HRCWH_TSEC2M_IN_MII |\
				 HRCWH_BIG_ENDIAN)

#define CONFIG_SYS_SICRH	0x00000000
#define CONFIG_SYS_SICRL	(SICRL_LBC | SICRL_SPI_D)

#define CONFIG_HWCONFIG

#define CONFIG_SYS_HID0_INIT	0x000000000
#define CONFIG_SYS_HID0_FINAL	(HID0_ENABLE_MACHINE_CHECK |\
				 HID0_ENABLE_INSTRUCTION_CACHE |\
				 HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)

#define CONFIG_SYS_HID2	(HID2_HBE | 0x00020000)

/*
 * Definitions for initial stack pointer and data area (in DCACHE )
 */
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_INIT_RAM_ADDR	0xFD000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x1000  /* End of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_SIZE	0x100
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
					 - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

/*
 * Local Bus LCRR and LBCR regs
 */
#define CONFIG_SYS_LCRR_EADC		LCRR_EADC_1
#define CONFIG_SYS_LCRR_CLKDIV		LCRR_CLKDIV_2
#define CONFIG_SYS_LBC_LBCR		(0x00040000 |\
					 (0xFF << LBCR_BMT_SHIFT) |\
					 0xF)

#define CONFIG_SYS_LBC_MRTPR		0x20000000

/*
 * Internal Definitions
 */
/*
 * DDR Setup
 */
#define CONFIG_SYS_DDR_BASE		0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_BASE
#define CONFIG_SYS_DDR_SDRAM_BASE	CONFIG_SYS_DDR_BASE

/*
 * Manually set up DDR parameters,
 * as this board has not the SPD connected to I2C.
 */
#define CONFIG_SYS_DDR_SIZE		256		/* MB */
#define CONFIG_SYS_DDR_CONFIG		(CSCONFIG_EN |\
					 0x00010000 |\
					 CSCONFIG_ROW_BIT_13 |\
					 CSCONFIG_COL_BIT_10)

#define CONFIG_SYS_DDR_CONFIG_256	(CONFIG_SYS_DDR_CONFIG | \
					 CSCONFIG_BANK_BIT_3)

#define CONFIG_SYS_DDR_TIMING_3	(1 << 16)	/* ext refrec */
#define CONFIG_SYS_DDR_TIMING_0	((3 << TIMING_CFG0_RWT_SHIFT) |\
				(3 << TIMING_CFG0_WRT_SHIFT) |\
				(3 << TIMING_CFG0_RRT_SHIFT) |\
				(3 << TIMING_CFG0_WWT_SHIFT) |\
				(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) |\
				(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) |\
				(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
				(2 << TIMING_CFG0_MRS_CYC_SHIFT))
#define CONFIG_SYS_DDR_TIMING_1	((4 << TIMING_CFG1_PRETOACT_SHIFT) |\
				(12 << TIMING_CFG1_ACTTOPRE_SHIFT) |\
				(4 << TIMING_CFG1_ACTTORW_SHIFT) |\
				(7 << TIMING_CFG1_CASLAT_SHIFT) |\
				(4 << TIMING_CFG1_REFREC_SHIFT) |\
				(4 << TIMING_CFG1_WRREC_SHIFT) |\
				(2 << TIMING_CFG1_ACTTOACT_SHIFT) |\
				(2 << TIMING_CFG1_WRTORD_SHIFT))
#define CONFIG_SYS_DDR_TIMING_2	((1 << TIMING_CFG2_ADD_LAT_SHIFT) |\
				(5 << TIMING_CFG2_CPO_SHIFT) |\
				(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) |\
				(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) |\
				(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) |\
				(1 << TIMING_CFG2_CKE_PLS_SHIFT) |\
				(6 << TIMING_CFG2_FOUR_ACT_SHIFT))

#define CONFIG_SYS_DDR_INTERVAL	((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) |\
				(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))

#define CONFIG_SYS_SDRAM_CFG		(SDRAM_CFG_SREN |\
					 SDRAM_CFG_2T_EN | SDRAM_CFG_HSE |\
					 SDRAM_CFG_DBW_32 |\
					 SDRAM_CFG_SDRAM_TYPE_DDR2)

#define CONFIG_SYS_SDRAM_CFG2		0x00401000
#define CONFIG_SYS_DDR_MODE		((0x0448 << SDRAM_MODE_ESD_SHIFT) |\
					 (0x0242 << SDRAM_MODE_SD_SHIFT))
#define CONFIG_SYS_DDR_MODE_2		0x00000000
#define CONFIG_SYS_DDR_CLK_CNTL	DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
#define CONFIG_SYS_DDRCDR_VALUE	(DDRCDR_EN |\
					 DDRCDR_PZ_NOMZ |\
					 DDRCDR_NZ_NOMZ |\
					 DDRCDR_ODT |\
					 DDRCDR_M_ODR |\
					 DDRCDR_Q_DRN)

/*
 * on-board devices
 */
#define CONFIG_TSEC1
#define CONFIG_TSEC2
#define CONFIG_TSEC_ENET
#define CONFIG_HARD_SPI
#define CONFIG_HARD_I2C

/*
 * NOR FLASH setup
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
#define CONFIG_FLASH_SHOW_PROGRESS	50
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_SYS_FLASH_BASE		0xFF800000
#define CONFIG_SYS_FLASH_SIZE		8
#define CONFIG_SYS_FLASH_PROTECTION

#define CONFIG_SYS_LBLAWBAR0_PRELIM	CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LBLAWAR0_PRELIM	0x80000016

#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR0_PRELIM		(MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
					 OR_GPCM_SCY_10 |\
					 OR_GPCM_EHTR |\
					 OR_GPCM_TRLX |\
					 OR_GPCM_CSNT |\
					 OR_GPCM_EAD)
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128

#define CONFIG_SYS_FLASH_ERASE_TOUT	60000
#define CONFIG_SYS_FLASH_WRITE_TOUT	500

/*
 * NAND FLASH setup
 */
#define CONFIG_SYS_NAND_BASE		0xE1000000
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_SYS_NAND_PAGE_SIZE	(2048)
#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 << 10)
#define NAND_CACHE_PAGES		64

#define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
#define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000000E
#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
#define CONFIG_SYS_NAND_LBLAWAR_PRELIM	CONFIG_SYS_LBLAWAR1_PRELIM

#define CONFIG_SYS_BR1_PRELIM	((CONFIG_SYS_NAND_BASE) |\
				 (2<<BR_DECC_SHIFT) |\
				 BR_PS_8 |\
				 BR_MS_FCM |\
				 BR_V)

#define CONFIG_SYS_OR1_PRELIM	(0xFFFF8000 |\
				 OR_FCM_PGS |\
				 OR_FCM_CSCT |\
				 OR_FCM_CST |\
				 OR_FCM_CHT |\
				 OR_FCM_SCY_4 |\
				 OR_FCM_TRLX |\
				 OR_FCM_EHTR |\
				 OR_FCM_RST)

/*
 * MRAM setup
 */
#define CONFIG_SYS_MRAM_BASE		0xE2000000
#define CONFIG_SYS_MRAM_SIZE		0x20000	/* 128 Kb */
#define CONFIG_SYS_LBLAWBAR2_PRELIM	CONFIG_SYS_MRAM_BASE
#define CONFIG_SYS_LBLAWAR2_PRELIM	0x80000010	/* 128 Kb  */

#define CONFIG_SYS_OR_TIMING_MRAM

#define CONFIG_SYS_BR2_PRELIM		(CONFIG_SYS_MRAM_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR2_PRELIM		0xFFFE0C74

/*
 * CPLD setup
 */
#define CONFIG_SYS_CPLD_BASE		0xE3000000
#define CONFIG_SYS_CPLD_SIZE		0x8000
#define CONFIG_SYS_LBLAWBAR3_PRELIM	CONFIG_SYS_CPLD_BASE
#define CONFIG_SYS_LBLAWAR3_PRELIM	0x8000000E

#define CONFIG_SYS_OR_TIMING_MRAM

#define CONFIG_SYS_BR3_PRELIM		(CONFIG_SYS_CPLD_BASE |\
					 BR_PS_8 |\
					 BR_MS_GPCM |\
					 BR_V)

#define CONFIG_SYS_OR3_PRELIM		0xFFFF8814

/*
 * HW-Watchdog
 */
#define CONFIG_WATCHDOG		1
#define CONFIG_SYS_WATCHDOG_VALUE	0xFFFF

/*
 * I2C setup
 */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3100
#define CONFIG_RTC_PCF8563
#define CONFIG_SYS_I2C_RTC_ADDR	0x51

/*
 * SPI setup
 */
#ifdef CONFIG_HARD_SPI
#define CONFIG_MPC8XXX_SPI
#define CONFIG_CMD_SPI
#define CONFIG_SYS_GPIO1_PRELIM
#define CONFIG_SYS_GPIO1_DIR		0x00000001
#define CONFIG_SYS_GPIO1_DAT		0x00000001
#endif

/*
 * Ethernet setup
 */
#ifdef CONFIG_TSEC1
#define CONFIG_HAS_ETH0
#define CONFIG_TSEC1_NAME		"TSEC0"
#define CONFIG_SYS_TSEC1_OFFSET	0x24000
#define TSEC1_PHY_ADDR			0x1
#define TSEC1_FLAGS			TSEC_GIGABIT
#define TSEC1_PHYIDX			0
#endif

#ifdef CONFIG_TSEC2
#define CONFIG_HAS_ETH1
#define CONFIG_TSEC2_NAME		"TSEC1"
#define CONFIG_SYS_TSEC2_OFFSET	0x25000
#define TSEC2_PHY_ADDR			0x3
#define TSEC2_FLAGS			TSEC_GIGABIT
#define TSEC2_PHYIDX			0
#endif
#define CONFIG_ETHPRIME		"TSEC1"

/*
 * Serial Port
 */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_IMMR + 0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_IMMR + 0x4600)
#define CONFIG_SYS_NS16550_CLK		(CONFIG_83XX_CLKIN * 2)

#define CONFIG_HAS_FSL_DR_USB
#define CONFIG_SYS_SCCR_USBDRCM	3

/*
 * BAT's
 */
#define CONFIG_HIGH_BATS

/* DDR @ 0x00000000 */
#define CONFIG_SYS_IBAT0L		(CONFIG_SYS_SDRAM_BASE |\
					 BATL_PP_10)
#define CONFIG_SYS_IBAT0U		(CONFIG_SYS_SDRAM_BASE |\
					 BATU_BL_256M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT0L		CONFIG_SYS_IBAT0L
#define CONFIG_SYS_DBAT0U		CONFIG_SYS_IBAT0U

/* Initial RAM @ 0xFD000000 */
#define CONFIG_SYS_IBAT1L		(CONFIG_SYS_INIT_RAM_ADDR |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT1U		(CONFIG_SYS_INIT_RAM_ADDR |\
					 BATU_BL_256K |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT1L		CONFIG_SYS_IBAT1L
#define CONFIG_SYS_DBAT1U		CONFIG_SYS_IBAT1U

/* FLASH @ 0xFF800000 */
#define CONFIG_SYS_IBAT2L		(CONFIG_SYS_FLASH_BASE |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT2U		(CONFIG_SYS_FLASH_BASE |\
					 BATU_BL_8M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT2L		(CONFIG_SYS_FLASH_BASE |\
					 BATL_PP_10 |\
					 BATL_CACHEINHIBIT |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT2U		CONFIG_SYS_IBAT2U

#define CONFIG_SYS_IBAT3L		(0)
#define CONFIG_SYS_IBAT3U		(0)
#define CONFIG_SYS_DBAT3L		CONFIG_SYS_IBAT3L
#define CONFIG_SYS_DBAT3U		CONFIG_SYS_IBAT3U

#define CONFIG_SYS_IBAT4L		(0)
#define CONFIG_SYS_IBAT4U		(0)
#define CONFIG_SYS_DBAT4L		CONFIG_SYS_IBAT4L
#define CONFIG_SYS_DBAT4U		CONFIG_SYS_IBAT4U

/* IMMRBAR @ 0xF0000000 */
#define CONFIG_SYS_IBAT5L		(CONFIG_SYS_IMMR |\
					 BATL_PP_10 |\
					 BATL_CACHEINHIBIT |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT5U		(CONFIG_SYS_IMMR |\
					 BATU_BL_128M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT5L		CONFIG_SYS_IBAT5L
#define CONFIG_SYS_DBAT5U		CONFIG_SYS_IBAT5U

/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
#define CONFIG_SYS_IBAT6L		(0xE0000000 |\
					 BATL_PP_10 |\
					 BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_IBAT6U		(0xE0000000 |\
					 BATU_BL_256M |\
					 BATU_VS |\
					 BATU_VP)
#define CONFIG_SYS_DBAT6L		CONFIG_SYS_IBAT6L
#define CONFIG_SYS_DBAT6U		CONFIG_SYS_IBAT6U

#define CONFIG_SYS_IBAT7L		(0)
#define CONFIG_SYS_IBAT7U		(0)
#define CONFIG_SYS_DBAT7L		CONFIG_SYS_IBAT7L
#define CONFIG_SYS_DBAT7U		CONFIG_SYS_IBAT7U

/*
 * U-Boot environment setup
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_NFS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_FLASH
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_MII
#define CONFIG_CMD_DATE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_CMD_EDITENV
#define CONFIG_CMD_JFFS2
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/*
 * The reserved memory
 */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(8 * 1024 * 1024)

/*
 * Environment Configuration
 */
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE \
				+ CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SIZE		0x20000
#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)


#define CONFIG_NETDEV			eth1
#define CONFIG_HOSTNAME		ids8313
#define CONFIG_ROOTPATH		"/opt/eldk-4.2/ppc_6xx"
#define CONFIG_BOOTFILE		"ids8313/uImage"
#define CONFIG_UBOOTPATH		"ids8313/u-boot.bin"
#define CONFIG_FDTFILE			"ids8313/ids8313.dtb"
#define CONFIG_LOADADDR		0x400000
#define CONFIG_CMD_ENV_FLAGS
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"

#define CONFIG_BAUDRATE		115200

/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE		1024
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
					 + sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser	*/
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

#define CONFIG_SYS_MEMTEST_START	0x00001000
#define CONFIG_SYS_MEMTEST_END		0x00C00000

#define CONFIG_SYS_LOAD_ADDR		0x100000
#define CONFIG_MII
#define CONFIG_LOADS_ECHO
#define CONFIG_TIMESTAMP
#define CONFIG_PREBOOT			"echo;" \
					"echo Type \\\"run nfsboot\\\" " \
					"to mount root filesystem over NFS;echo"
#undef	CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND		"run boot_cramfs"
#undef	CONFIG_SYS_LOADS_BAUD_CHANGE

#define CONFIG_JFFS2_NAND
#define CONFIG_JFFS2_DEV		"0"

/* mtdparts command line support */
#define CONFIG_CMD_MTDPARTS
#define CONFIG_FLASH_CFI_MTD
#define CONFIG_MTD_DEVICE
#define MTDIDS_DEFAULT		"nor0=ff800000.flash,nand0=e1000000.flash"
#define MTDPARTS_DEFAULT	"mtdparts=ff800000.flash:7m(dum)," \
					"768k(BOOT-BIN)," \
					"128k(BOOT-ENV),128k(BOOT-REDENV);" \
					"e1000000.flash:-(ubi)"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
	"ethprime=TSEC1\0"						\
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
	"tftpflash=tftpboot ${loadaddr} ${uboot}; "			\
		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" +${filesize}; "					\
		"erase " __stringify(CONFIG_SYS_TEXT_BASE)		\
		" +${filesize}; "					\
		"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" ${filesize}; "					\
		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
		" +${filesize}; "					\
		"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE)	\
		" ${filesize}\0"					\
	"console=ttyS0\0"						\
	"fdtaddr=0x780000\0"						\
	"kernel_addr=ff800000\0"					\
	"fdtfile=" __stringify(CONFIG_FDTFILE) "\0"			\
	"setbootargs=setenv bootargs "					\
		"root=${rootdev} rw console=${console},"		\
			"${baudrate} ${othbootargs}\0"			\
	"setipargs=setenv bootargs root=${rootdev} rw "			\
			"nfsroot=${serverip}:${rootpath} "		\
			"ip=${ipaddr}:${serverip}:${gatewayip}:"	\
			"${netmask}:${hostname}:${netdev}:off "		\
			"console=${console},${baudrate} ${othbootargs}\0" \
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"mtdids=" MTDIDS_DEFAULT "\0"					\
	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
	"\0"

#define CONFIG_NFSBOOTCOMMAND						\
	"setenv rootdev /dev/nfs;"					\
	"run setipargs;run addmtd;"					\
	"tftp ${loadaddr} ${bootfile};"				\
	"tftp ${fdtaddr} ${fdtfile};"					\
	"fdt addr ${fdtaddr};"						\
	"bootm ${loadaddr} - ${fdtaddr}"

/* UBI Support */
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_MTD_PARTITIONS

/* bootcount support */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_BOOTCOUNT_I2C
#define CONFIG_BOOTCOUNT_ALEN	1
#define CONFIG_SYS_BOOTCOUNT_ADDR	0x9

#define CONFIG_VERSION_VARIABLE

#define CONFIG_IMAGE_FORMAT_LEGACY
#define CONFIG_CMD_FDT
#define CONFIG_CMD_HASH
#define CONFIG_SHA1
#define CONFIG_SHA256

#endif	/* __CONFIG_H */
Commit	Line	Data
eaf8c986 HS	1	/*
	2	* (C) Copyright 2013
	3	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* Copyright (c) 2011 IDS GmbH, Germany
	7	* Sergej Stepanov <ste@ids.de>
	8	*
	9	* SPDX-License-Identifier: GPL-2.0+
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
	15	/*
	16	* High Level Configuration Options
	17	*/
	18	#define CONFIG_MPC831x
	19	#define CONFIG_MPC8313
	20	#define CONFIG_IDS8313
	21
03838059 HS	22	#define CONFIG_SYS_GENERIC_BOARD
03838059 HS	23
eaf8c986 HS	24	#define CONFIG_FSL_ELBC
	25
	26	#define CONFIG_MISC_INIT_R
	27
	28	#define CONFIG_AUTOBOOT_KEYED
	29	#define CONFIG_AUTOBOOT_PROMPT \
	30	"\nEnter password - autoboot in %d seconds...\n", CONFIG_BOOTDELAY
	31	#define CONFIG_AUTOBOOT_DELAY_STR "ids"
	32	#define CONFIG_BOOT_RETRY_TIME 900
	33	#define CONFIG_BOOT_RETRY_MIN 30
	34	#define CONFIG_BOOTDELAY 1
	35	#define CONFIG_RESET_TO_RETRY
	36
	37	#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
	38	#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
	39
	40	#define CONFIG_SYS_IMMR 0xF0000000
	41
	42	#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
	43	#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
	44
	45	/*
	46	* Hardware Reset Configuration Word
	47	* if CLKIN is 66.000MHz, then
	48	* CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
	49	*/
	50	#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ \|\
	51	HRCWL_DDR_TO_SCB_CLK_2X1 \|\
	52	HRCWL_CSB_TO_CLKIN_2X1 \|\
	53	HRCWL_CORE_TO_CSB_2X1)
	54
	55	#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST \|\
	56	HRCWH_CORE_ENABLE \|\
	57	HRCWH_FROM_0XFFF00100 \|\
	58	HRCWH_BOOTSEQ_DISABLE \|\
	59	HRCWH_SW_WATCHDOG_DISABLE \|\
	60	HRCWH_ROM_LOC_LOCAL_8BIT \|\
	61	HRCWH_RL_EXT_LEGACY \|\
	62	HRCWH_TSEC1M_IN_MII \|\
	63	HRCWH_TSEC2M_IN_MII \|\
	64	HRCWH_BIG_ENDIAN)
	65
	66	#define CONFIG_SYS_SICRH 0x00000000
	67	#define CONFIG_SYS_SICRL (SICRL_LBC \| SICRL_SPI_D)
	68
	69	#define CONFIG_HWCONFIG
	70
	71	#define CONFIG_SYS_HID0_INIT 0x000000000
	72	#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \|\
	73	HID0_ENABLE_INSTRUCTION_CACHE \|\
	74	HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)
	75
	76	#define CONFIG_SYS_HID2 (HID2_HBE \| 0x00020000)
	77
	78	/*
	79	* Definitions for initial stack pointer and data area (in DCACHE )
	80	*/
	81	#define CONFIG_SYS_INIT_RAM_LOCK
	82	#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000
	83	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */
	84	#define CONFIG_SYS_GBL_DATA_SIZE 0x100
	85	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
	86	- CONFIG_SYS_GBL_DATA_SIZE)
	87	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
88
89	/*
90	* Local Bus LCRR and LBCR regs
91	*/
92	#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
93	#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
94	#define CONFIG_SYS_LBC_LBCR (0x00040000 \|\
95	(0xFF << LBCR_BMT_SHIFT) \|\
96	0xF)
97
98	#define CONFIG_SYS_LBC_MRTPR 0x20000000
99
100	/*
101	* Internal Definitions
102	*/
103	/*
104	* DDR Setup
105	*/
106	#define CONFIG_SYS_DDR_BASE 0x00000000
107	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
108	#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
109
110	/*
111	* Manually set up DDR parameters,
112	* as this board has not the SPD connected to I2C.
113	*/
114	#define CONFIG_SYS_DDR_SIZE 256 /* MB */
115	#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN \|\
116	0x00010000 \|\
117	CSCONFIG_ROW_BIT_13 \|\
118	CSCONFIG_COL_BIT_10)
119
120	#define CONFIG_SYS_DDR_CONFIG_256 (CONFIG_SYS_DDR_CONFIG \| \
121	CSCONFIG_BANK_BIT_3)
122
123	#define CONFIG_SYS_DDR_TIMING_3 (1 << 16) /* ext refrec */
124	#define CONFIG_SYS_DDR_TIMING_0 ((3 << TIMING_CFG0_RWT_SHIFT) \|\
125	(3 << TIMING_CFG0_WRT_SHIFT) \|\
126	(3 << TIMING_CFG0_RRT_SHIFT) \|\
127	(3 << TIMING_CFG0_WWT_SHIFT) \|\
128	(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \|\
129	(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \|\
130	(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \| \
131	(2 << TIMING_CFG0_MRS_CYC_SHIFT))
132	#define CONFIG_SYS_DDR_TIMING_1 ((4 << TIMING_CFG1_PRETOACT_SHIFT) \|\
133	(12 << TIMING_CFG1_ACTTOPRE_SHIFT) \|\
134	(4 << TIMING_CFG1_ACTTORW_SHIFT) \|\
135	(7 << TIMING_CFG1_CASLAT_SHIFT) \|\
136	(4 << TIMING_CFG1_REFREC_SHIFT) \|\
137	(4 << TIMING_CFG1_WRREC_SHIFT) \|\
138	(2 << TIMING_CFG1_ACTTOACT_SHIFT) \|\
139	(2 << TIMING_CFG1_WRTORD_SHIFT))
140	#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \|\
141	(5 << TIMING_CFG2_CPO_SHIFT) \|\
142	(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \|\
143	(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \|\
144	(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \|\
145	(1 << TIMING_CFG2_CKE_PLS_SHIFT) \|\
146	(6 << TIMING_CFG2_FOUR_ACT_SHIFT))
147
148	#define CONFIG_SYS_DDR_INTERVAL ((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) \|\
149	(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
150
151	#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \|\
152	SDRAM_CFG_2T_EN \| SDRAM_CFG_HSE \|\
153	SDRAM_CFG_DBW_32 \|\
154	SDRAM_CFG_SDRAM_TYPE_DDR2)
155
156	#define CONFIG_SYS_SDRAM_CFG2 0x00401000
157	#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \|\
158	(0x0242 << SDRAM_MODE_SD_SHIFT))
159	#define CONFIG_SYS_DDR_MODE_2 0x00000000
160	#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
161	#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \|\
162	DDRCDR_PZ_NOMZ \|\
163	DDRCDR_NZ_NOMZ \|\
164	DDRCDR_ODT \|\
165	DDRCDR_M_ODR \|\
166	DDRCDR_Q_DRN)
167
168	/*
169	* on-board devices
170	*/
171	#define CONFIG_TSEC1
172	#define CONFIG_TSEC2
173	#define CONFIG_TSEC_ENET
eaf8c986 HS	174	#define CONFIG_HARD_SPI
	175	#define CONFIG_HARD_I2C
	176
	177	/*
	178	* NOR FLASH setup
	179	*/
	180	#define CONFIG_SYS_FLASH_CFI
	181	#define CONFIG_FLASH_CFI_DRIVER
	182	#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
	183	#define CONFIG_FLASH_SHOW_PROGRESS 50
	184	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	185
	186	#define CONFIG_SYS_FLASH_BASE 0xFF800000
	187	#define CONFIG_SYS_FLASH_SIZE 8
	188	#define CONFIG_SYS_FLASH_PROTECTION
	189
	190	#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
	191	#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016
	192
	193	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \|\
	194	BR_PS_8 \|\
	195	BR_MS_GPCM \|\
	196	BR_V)
	197
	198	#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \|\
	199	OR_GPCM_SCY_10 \|\
	200	OR_GPCM_EHTR \|\
	201	OR_GPCM_TRLX \|\
	202	OR_GPCM_CSNT \|\
	203	OR_GPCM_EAD)
	204	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	205	#define CONFIG_SYS_MAX_FLASH_SECT 128
	206
	207	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
	208	#define CONFIG_SYS_FLASH_WRITE_TOUT 500
	209
	210	/*
	211	* NAND FLASH setup
	212	*/
	213	#define CONFIG_SYS_NAND_BASE 0xE1000000
	214	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	215	#define CONFIG_SYS_NAND_MAX_CHIPS 1
eaf8c986 HS	216	#define CONFIG_NAND_FSL_ELBC
	217	#define CONFIG_SYS_NAND_PAGE_SIZE (2048)
	218	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
	219	#define NAND_CACHE_PAGES 64
	220
	221	#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
	222	#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E
	223	#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
	224	#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
	225
	226	#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) \|\
	227	(2<<BR_DECC_SHIFT) \|\
	228	BR_PS_8 \|\
	229	BR_MS_FCM \|\
	230	BR_V)
	231
	232	#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 \|\
	233	OR_FCM_PGS \|\
	234	OR_FCM_CSCT \|\
	235	OR_FCM_CST \|\
	236	OR_FCM_CHT \|\
	237	OR_FCM_SCY_4 \|\
	238	OR_FCM_TRLX \|\
	239	OR_FCM_EHTR \|\
	240	OR_FCM_RST)
	241
	242	/*
	243	* MRAM setup
	244	*/
	245	#define CONFIG_SYS_MRAM_BASE 0xE2000000
	246	#define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */
	247	#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_MRAM_BASE
	248	#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* 128 Kb */
	249
	250	#define CONFIG_SYS_OR_TIMING_MRAM
	251
	252	#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_MRAM_BASE \|\
	253	BR_PS_8 \|\
	254	BR_MS_GPCM \|\
	255	BR_V)
	256
	257	#define CONFIG_SYS_OR2_PRELIM 0xFFFE0C74
	258
	259	/*
	260	* CPLD setup
	261	*/
	262	#define CONFIG_SYS_CPLD_BASE 0xE3000000
	263	#define CONFIG_SYS_CPLD_SIZE 0x8000
	264	#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CPLD_BASE
	265	#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E
	266
	267	#define CONFIG_SYS_OR_TIMING_MRAM
	268
	269	#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CPLD_BASE \|\
	270	BR_PS_8 \|\
	271	BR_MS_GPCM \|\
	272	BR_V)
	273
	274	#define CONFIG_SYS_OR3_PRELIM 0xFFFF8814
	275
	276	/*
	277	* HW-Watchdog
	278	*/
	279	#define CONFIG_WATCHDOG 1
280	#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
281
282	/*
283	* I2C setup
284	*/
285	#define CONFIG_CMD_I2C
286	#define CONFIG_SYS_I2C
287	#define CONFIG_SYS_I2C_FSL
288	#define CONFIG_SYS_FSL_I2C_SPEED 400000
289	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
290	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100
291	#define CONFIG_RTC_PCF8563
292	#define CONFIG_SYS_I2C_RTC_ADDR 0x51
293
294	/*
295	* SPI setup
296	*/
297	#ifdef CONFIG_HARD_SPI
298	#define CONFIG_MPC8XXX_SPI
299	#define CONFIG_CMD_SPI
300	#define CONFIG_SYS_GPIO1_PRELIM
301	#define CONFIG_SYS_GPIO1_DIR 0x00000001
302	#define CONFIG_SYS_GPIO1_DAT 0x00000001
303	#endif
304
305	/*
306	* Ethernet setup
307	*/
308	#ifdef CONFIG_TSEC1
309	#define CONFIG_HAS_ETH0
310	#define CONFIG_TSEC1_NAME "TSEC0"
311	#define CONFIG_SYS_TSEC1_OFFSET 0x24000
312	#define TSEC1_PHY_ADDR 0x1
313	#define TSEC1_FLAGS TSEC_GIGABIT
314	#define TSEC1_PHYIDX 0
315	#endif
316
317	#ifdef CONFIG_TSEC2
318	#define CONFIG_HAS_ETH1
319	#define CONFIG_TSEC2_NAME "TSEC1"
320	#define CONFIG_SYS_TSEC2_OFFSET 0x25000
321	#define TSEC2_PHY_ADDR 0x3
322	#define TSEC2_FLAGS TSEC_GIGABIT
323	#define TSEC2_PHYIDX 0
324	#endif
325	#define CONFIG_ETHPRIME "TSEC1"
326
327	/*
328	* Serial Port
329	*/
330	#define CONFIG_CONS_INDEX 1
331	#define CONFIG_SYS_NS16550
332	#define CONFIG_SYS_NS16550_SERIAL
333	#define CONFIG_SYS_NS16550_REG_SIZE 1
334
335	#define CONFIG_SYS_BAUDRATE_TABLE \
336	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
337	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
338	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
339	#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
340
341	#define CONFIG_HAS_FSL_DR_USB
342	#define CONFIG_SYS_SCCR_USBDRCM 3
343
344	/*
345	* BAT's
346	*/
347	#define CONFIG_HIGH_BATS
348
349	/* DDR @ 0x00000000 */
350	#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \|\
351	BATL_PP_10)
352	#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \|\
353	BATU_BL_256M \|\
354	BATU_VS \|\
355	BATU_VP)
356	#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
357	#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
358
359	/* Initial RAM @ 0xFD000000 */
360	#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR \|\
361	BATL_PP_10 \|\
362	BATL_GUARDEDSTORAGE)
363	#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR \|\
364	BATU_BL_256K \|\
365	BATU_VS \|\
366	BATU_VP)
367	#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
368	#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
369
370	/* FLASH @ 0xFF800000 */
371	#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE \|\
372	BATL_PP_10 \|\
373	BATL_GUARDEDSTORAGE)
374	#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE \|\
375	BATU_BL_8M \|\
376	BATU_VS \|\
377	BATU_VP)
378	#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE \|\
379	BATL_PP_10 \|\
380	BATL_CACHEINHIBIT \|\
381	BATL_GUARDEDSTORAGE)
382	#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
383
384	#define CONFIG_SYS_IBAT3L (0)
385	#define CONFIG_SYS_IBAT3U (0)
386	#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
387	#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
388
389	#define CONFIG_SYS_IBAT4L (0)
390	#define CONFIG_SYS_IBAT4U (0)
391	#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
392	#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
393
394	/* IMMRBAR @ 0xF0000000 */
395	#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \|\
396	BATL_PP_10 \|\
397	BATL_CACHEINHIBIT \|\
398	BATL_GUARDEDSTORAGE)
399	#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \|\
400	BATU_BL_128M \|\
401	BATU_VS \|\
402	BATU_VP)
403	#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
404	#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
405
406	/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
407	#define CONFIG_SYS_IBAT6L (0xE0000000 \|\
408	BATL_PP_10 \|\
409	BATL_GUARDEDSTORAGE)
410	#define CONFIG_SYS_IBAT6U (0xE0000000 \|\
411	BATU_BL_256M \|\
412	BATU_VS \|\
413	BATU_VP)
414	#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
415	#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
416
417	#define CONFIG_SYS_IBAT7L (0)
418	#define CONFIG_SYS_IBAT7U (0)
419	#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
420	#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
421
422	/*
423	* U-Boot environment setup
424	*/
425	#include <config_cmd_default.h>
426
427	#define CONFIG_CMD_DHCP
428	#define CONFIG_CMD_PING
429	#define CONFIG_CMD_NFS
430	#define CONFIG_CMD_NAND
431	#define CONFIG_CMD_FLASH
432	#define CONFIG_CMD_SNTP
433	#define CONFIG_CMD_MII
434	#define CONFIG_CMD_DATE
435	#define CONFIG_CMDLINE_EDITING
436	#define CONFIG_CMD_EDITENV
437	#define CONFIG_CMD_JFFS2
438	#define CONFIG_BOOTP_SUBNETMASK
439	#define CONFIG_BOOTP_GATEWAY
440	#define CONFIG_BOOTP_HOSTNAME
441	#define CONFIG_BOOTP_BOOTPATH
442	#define CONFIG_BOOTP_BOOTFILESIZE
443	/* pass open firmware flat tree */
444	#define CONFIG_OF_LIBFDT
445	#define CONFIG_OF_BOARD_SETUP
446	#define CONFIG_OF_STDOUT_VIA_ALIAS
447
448	/*
449	* The reserved memory
450	*/
451	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
452	#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
453	#define CONFIG_SYS_MALLOC_LEN (8 * 1024 * 1024)
454
455	/*
456	* Environment Configuration
457	*/
458	#define CONFIG_ENV_IS_IN_FLASH
459	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
460	+ CONFIG_SYS_MONITOR_LEN)
461	#define CONFIG_ENV_SIZE 0x20000
462	#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
463	#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
464
465
466	#define CONFIG_NETDEV eth1
467	#define CONFIG_HOSTNAME ids8313
468	#define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx"
469	#define CONFIG_BOOTFILE "ids8313/uImage"
470	#define CONFIG_UBOOTPATH "ids8313/u-boot.bin"
471	#define CONFIG_FDTFILE "ids8313/ids8313.dtb"
472	#define CONFIG_LOADADDR 0x400000
473	#define CONFIG_CMD_ENV_FLAGS
474	#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
475
476	#define CONFIG_BAUDRATE 115200
eaf8c986 HS	477
	478	/* Initial Memory map for Linux*/
	479	#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
	480
	481	/*
	482	* Miscellaneous configurable options
	483	*/
	484	#define CONFIG_SYS_LONGHELP
eaf8c986 HS	485	#define CONFIG_SYS_CBSIZE 1024
	486	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
	487	+ sizeof(CONFIG_SYS_PROMPT)+16)
	488	#define CONFIG_SYS_MAXARGS 16
	489	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	490	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	491	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	492
	493	#define CONFIG_SYS_MEMTEST_START 0x00001000
	494	#define CONFIG_SYS_MEMTEST_END 0x00C00000
	495
	496	#define CONFIG_SYS_LOAD_ADDR 0x100000
	497	#define CONFIG_MII
	498	#define CONFIG_LOADS_ECHO
	499	#define CONFIG_TIMESTAMP
	500	#define CONFIG_PREBOOT "echo;" \
	501	"echo Type \\\"run nfsboot\\\" " \
	502	"to mount root filesystem over NFS;echo"
	503	#undef CONFIG_BOOTARGS
	504	#define CONFIG_BOOTCOMMAND "run boot_cramfs"
	505	#undef CONFIG_SYS_LOADS_BAUD_CHANGE
	506
	507	#define CONFIG_JFFS2_NAND
	508	#define CONFIG_JFFS2_DEV "0"
	509
	510	/* mtdparts command line support */
	511	#define CONFIG_CMD_MTDPARTS
	512	#define CONFIG_FLASH_CFI_MTD
	513	#define CONFIG_MTD_DEVICE
	514	#define MTDIDS_DEFAULT "nor0=ff800000.flash,nand0=e1000000.flash"
	515	#define MTDPARTS_DEFAULT "mtdparts=ff800000.flash:7m(dum)," \
	516	"768k(BOOT-BIN)," \
	517	"128k(BOOT-ENV),128k(BOOT-REDENV);" \
	518	"e1000000.flash:-(ubi)"
	519
	520	#define CONFIG_EXTRA_ENV_SETTINGS \
	521	"netdev=" __stringify(CONFIG_NETDEV) "\0" \
	522	"ethprime=TSEC1\0" \
	523	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	524	"tftpflash=tftpboot ${loadaddr} ${uboot}; " \
	525	"protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
	526	" +${filesize}; " \
	527	"erase " __stringify(CONFIG_SYS_TEXT_BASE) \
	528	" +${filesize}; " \
	529	"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
	530	" ${filesize}; " \
	531	"protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
	532	" +${filesize}; " \
	533	"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
	534	" ${filesize}\0" \
	535	"console=ttyS0\0" \
	536	"fdtaddr=0x780000\0" \
	537	"kernel_addr=ff800000\0" \
	538	"fdtfile=" __stringify(CONFIG_FDTFILE) "\0" \
	539	"setbootargs=setenv bootargs " \
	540	"root=${rootdev} rw console=${console}," \
	541	"${baudrate} ${othbootargs}\0" \
	542	"setipargs=setenv bootargs root=${rootdev} rw " \
	543	"nfsroot=${serverip}:${rootpath} " \
	544	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	545	"${netmask}:${hostname}:${netdev}:off " \
	546	"console=${console},${baudrate} ${othbootargs}\0" \
	547	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	548	"mtdids=" MTDIDS_DEFAULT "\0" \
549	"mtdparts=" MTDPARTS_DEFAULT "\0" \
550	"\0"
551
552	#define CONFIG_NFSBOOTCOMMAND \
553	"setenv rootdev /dev/nfs;" \
554	"run setipargs;run addmtd;" \
555	"tftp ${loadaddr} ${bootfile};" \
556	"tftp ${fdtaddr} ${fdtfile};" \
557	"fdt addr ${fdtaddr};" \
558	"bootm ${loadaddr} - ${fdtaddr}"
559
560	/* UBI Support */
561	#define CONFIG_CMD_NAND_TRIMFFS
562	#define CONFIG_CMD_UBI
563	#define CONFIG_CMD_UBIFS
564	#define CONFIG_RBTREE
565	#define CONFIG_LZO
566	#define CONFIG_MTD_PARTITIONS
567
568	/* bootcount support */
569	#define CONFIG_BOOTCOUNT_LIMIT
570	#define CONFIG_BOOTCOUNT_I2C
571	#define CONFIG_BOOTCOUNT_ALEN 1
572	#define CONFIG_SYS_BOOTCOUNT_ADDR 0x9
573
574	#define CONFIG_VERSION_VARIABLE
575
d835e91d	576	#define CONFIG_IMAGE_FORMAT_LEGACY
eaf8c986 HS	577	#define CONFIG_CMD_FDT
eaf8c986 HS	578	#define CONFIG_CMD_HASH
eaf8c986 HS	579	#define CONFIG_SHA1
eaf8c986 HS	580	#define CONFIG_SHA256
eaf8c986 HS	581
eaf8c986 HS	582	#endif /* __CONFIG_H */