[people/ms/u-boot.git] / include / configs / ima3-mx53.h

/*
 * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
 *
 * Copyright (C) 2010 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the MX53-EVK Freescale board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* SOC type must be included before imx-regs.h */
#define CONFIG_MX53
#include <asm/arch/imx-regs.h>

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG

#define CONFIG_OF_LIBFDT

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F

/* Enable GPIOs */
#define CONFIG_MXC_GPIO

/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART4_BASE_ADDR

/* MMC */
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION

/* Ethernet on FEC */
#define CONFIG_MII

#define CONFIG_FEC_MXC
#define IMX_FEC_BASE			FEC_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR		0x01
#define CONFIG_PHY_ADDR			CONFIG_FEC_MXC_PHYADDR
#define CONFIG_RESET_PHY_R
#define CONFIG_FEC_MXC_NO_ANEG
#define CONFIG_ETHPRIME			"FEC0"

/* SPI */
#define CONFIG_HARD_SPI
#define CONFIG_MXC_SPI
#define CONFIG_DEFAULT_SPI_BUS		1
#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0

/* SPI FLASH - not used for environment */
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED		25000000

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */
#include <config_cmd_default.h>
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_SPI
#define CONFIG_CMD_SF
#define CONFIG_CMD_GPIO

#define CONFIG_BOOTDELAY	3

#define CONFIG_LOADADDR		0x70800000	/* loadaddr env var */
#define CONFIG_SYS_TEXT_BASE    0xf0001400 /* uboot in nor flash */

#define CONFIG_ARP_TIMEOUT	200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		"IMA3 MX53 U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */

#define CONFIG_SYS_MEMTEST_START       0x70000000
#define CONFIG_SYS_MEMTEST_END         0x10000

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM_1		CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE	(1024 * 1024 * 1024)

#define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
#define MTDIDS_DEFAULT		"nor0=f0000000.flash"

/* FLASH and environment organization */

#define CONFIG_SYS_FLASH_BASE		0xF0000000
#define CONFIG_SYS_FLASH_CFI		/* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER		/* Use the common driver */
#define CONFIG_FLASH_CFI_MTD		/* with MTD support */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	1024

#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

#define CONFIG_ENV_SIZE        (8 * 1024)
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
				CONFIG_SYS_MONITOR_LEN)
#define CONFIG_ENV_SECT_SIZE	0x20000
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
					CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE

/*
 * Default environment and default scripts
 * to update uboot and load kernel
 */

#define HOSTNAME ima3-mx53

#define CONFIG_HOSTNAME ima3-mx53
#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ramargs=setenv bootargs root=/dev/ram0 rw\0"			\
	"addip_sta=setenv bootargs ${bootargs} "			\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"		\
	"addip=if test -n ${ipdyn};then run addip_dyn;"			\
		"else run addip_sta;fi\0"	\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addtty=setenv bootargs ${bootargs}"				\
		" console=${console},${baudrate}\0"			\
	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
	"console=ttymxc3\0"						\
	"loadaddr=70800000\0"						\
	"kernel_addr_r=70800000\0"					\
	"ramdisk_addr_r=71000000\0"					\
	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
	"mmcargs=setenv bootargs root=${mmcroot} "			\
		"rootfstype=${mmcrootfstype}\0"				\
	"mmcroot=/dev/mmcblk0p3 rw\0"					\
	"mmcboot=echo Booting from mmc ...; "				\
		"run mmcargs addip addtty addmtd addmisc mmcload;"	\
		"bootm\0"						\
	"mmcload=fatload mmc ${mmcdev}:${mmcpart} "			\
		"${loadaddr} ${uimage}\0"				\
	"mmcrootfstype=ext3 rootwait\0"					\
	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
		"run nfsargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};"		\
		"tftp ${kernel_addr_r} ${bootfile}\0"			\
	"net_self=if run net_self_load;then "				\
		"run ramargs addip addtty addmtd addmisc;"		\
		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
		"else echo Images not loades;fi\0"			\
	"satargs=setenv bootargs root=/dev/sda1\0"			\
	"satafile=boot/uImage\0"					\
	"ssdboot=echo Booting from ssd ...; "				\
		"run satargs addip addtty addmtd addmisc;"		\
		"sata init;ext2load sata 0:1 ${kernel_addr_r} "		\
		"${satafile};bootm\0"					\
	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0"		\
	"uimage=uImage\0"						\
	"load=tftp ${loadaddr} ${u-boot}\0"				\
	"uboot_addr=0xf0001000\0"					\
	"update=protect off 0xf0000000 +60000;"				\
		"erase ${uboot_addr} +60000;"				\
		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
	"upd=if run load;then echo Updating u-boot;if run update;"	\
		"then echo U-Boot updated;"				\
			"else echo Error updating u-boot !;"		\
			"echo Board without bootloader !!;"		\
		"fi;"							\
		"else echo U-Boot not downloaded..exiting;fi\0"		\
	"bootcmd=run net_nfs\0"


#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
	#define CONFIG_DWC_AHSATA
	#define CONFIG_SYS_SATA_MAX_DEVICE      1
	#define CONFIG_DWC_AHSATA_PORT_ID       0
	#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
	#define CONFIG_LBA48
	#define CONFIG_LIBATA
#endif

#endif				/* __CONFIG_H */
Commit	Line	Data
79656d27 SB	1	/*
	2	* (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
	3	*
	4	* Copyright (C) 2010 Freescale Semiconductor, Inc.
	5	*
	6	* Configuration settings for the MX53-EVK Freescale board.
	7	*
1a459660	8	* SPDX-License-Identifier: GPL-2.0+
79656d27 SB	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	/* SOC type must be included before imx-regs.h */
	15	#define CONFIG_MX53
	16	#include <asm/arch/imx-regs.h>
79656d27	17
79656d27 SB	18	#define CONFIG_DISPLAY_CPUINFO
	19	#define CONFIG_DISPLAY_BOARDINFO
	20
	21	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	22	#define CONFIG_SETUP_MEMORY_TAGS
	23	#define CONFIG_INITRD_TAG
	24
	25	#define CONFIG_OF_LIBFDT
	26
	27	/* Size of malloc() pool */
	28	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
	29
	30	#define CONFIG_BOARD_EARLY_INIT_F
	31
	32	/* Enable GPIOs */
	33	#define CONFIG_MXC_GPIO
	34
	35	/* UART */
	36	#define CONFIG_MXC_UART
	37	#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR
	38
	39	/* MMC */
	40	#define CONFIG_FSL_ESDHC
	41	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	42	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	43
	44	#define CONFIG_MMC
	45	#define CONFIG_GENERIC_MMC
	46	#define CONFIG_DOS_PARTITION
	47
	48	/* Ethernet on FEC */
79656d27	49	#define CONFIG_MII
79656d27 SB	50
	51	#define CONFIG_FEC_MXC
	52	#define IMX_FEC_BASE FEC_BASE_ADDR
	53	#define CONFIG_FEC_MXC_PHYADDR 0x01
	54	#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR
	55	#define CONFIG_RESET_PHY_R
	56	#define CONFIG_FEC_MXC_NO_ANEG
b85705e6	57	#define CONFIG_ETHPRIME "FEC0"
79656d27 SB	58
	59	/* SPI */
	60	#define CONFIG_HARD_SPI
	61	#define CONFIG_MXC_SPI
	62	#define CONFIG_DEFAULT_SPI_BUS 1
	63	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
	64
	65	/* SPI FLASH - not used for environment */
	66	#define CONFIG_SPI_FLASH
	67	#define CONFIG_SPI_FLASH_STMICRO
79656d27 SB	68	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	69	#define CONFIG_SF_DEFAULT_SPEED 25000000
	70
	71	/* allow to overwrite serial and ethaddr */
	72	#define CONFIG_ENV_OVERWRITE
	73	#define CONFIG_CONS_INDEX 1
	74	#define CONFIG_BAUDRATE 115200
79656d27 SB	75
	76	/* Command definition */
	77	#include <config_cmd_default.h>
	78	#define CONFIG_CMD_PING
	79	#define CONFIG_CMD_DHCP
	80	#define CONFIG_CMD_MII
	81	#define CONFIG_CMD_MMC
	82	#define CONFIG_CMD_FAT
	83	#define CONFIG_CMD_EXT2
	84	#define CONFIG_CMD_MTDPARTS
	85	#define CONFIG_CMD_SPI
	86	#define CONFIG_CMD_SF
	87	#define CONFIG_CMD_GPIO
	88
	89	#define CONFIG_BOOTDELAY 3
	90
	91	#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
	92	#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */
	93
	94	#define CONFIG_ARP_TIMEOUT 200UL
	95
	96	/* Miscellaneous configurable options */
	97	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	98	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
79656d27 SB	99	#define CONFIG_SYS_PROMPT "IMA3 MX53 U-Boot > "
	100	#define CONFIG_AUTO_COMPLETE
	101	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	102
	103	/* Print Buffer Size */
	104	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	105	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	106	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	107
	108	#define CONFIG_SYS_MEMTEST_START 0x70000000
	109	#define CONFIG_SYS_MEMTEST_END 0x10000
	110
	111	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	112
79656d27 SB	113	#define CONFIG_CMDLINE_EDITING
79656d27 SB	114
79656d27 SB	115	/* Physical Memory Map */
	116	#define CONFIG_NR_DRAM_BANKS 1
	117	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
	118	#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
	119
	120	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	121	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
	122	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
	123
	124	#define CONFIG_SYS_INIT_SP_OFFSET \
	125	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	126	#define CONFIG_SYS_INIT_SP_ADDR \
	127	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	128
	129	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	130	#define MTDIDS_DEFAULT "nor0=f0000000.flash"
	131
	132	/* FLASH and environment organization */
	133
	134	#define CONFIG_SYS_FLASH_BASE 0xF0000000
	135	#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
	136	#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
	137	#define CONFIG_FLASH_CFI_MTD /* with MTD support */
	138	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
	139	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	140	#define CONFIG_SYS_MAX_FLASH_SECT 1024
	141
	142	#define CONFIG_SYS_FLASH_EMPTY_INFO
	143	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	144
	145	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	146	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
	147
	148	#define CONFIG_ENV_SIZE (8 * 1024)
	149	#define CONFIG_ENV_IS_IN_FLASH
	150	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
	151	CONFIG_SYS_MONITOR_LEN)
	152	#define CONFIG_ENV_SECT_SIZE 0x20000
	153	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	154	CONFIG_ENV_SECT_SIZE)
	155	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	156
	157	/*
	158	* Default environment and default scripts
	159	* to update uboot and load kernel
	160	*/
	161
	162	#define HOSTNAME ima3-mx53
79656d27 SB	163
	164	#define CONFIG_HOSTNAME ima3-mx53
	165	#define CONFIG_EXTRA_ENV_SETTINGS \
	166	"netdev=eth0\0" \
	167	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	168	"nfsroot=${serverip}:${rootpath}\0" \
	169	"ramargs=setenv bootargs root=/dev/ram0 rw\0" \
	170	"addip_sta=setenv bootargs ${bootargs} " \
	171	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	172	":${hostname}:${netdev}:off panic=1\0" \
	173	"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
	174	"addip=if test -n ${ipdyn};then run addip_dyn;" \
	175	"else run addip_sta;fi\0" \
	176	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	177	"addtty=setenv bootargs ${bootargs}" \
	178	" console=${console},${baudrate}\0" \
	179	"addmisc=setenv bootargs ${bootargs} ${misc}\0" \
	180	"console=ttymxc3\0" \
	181	"loadaddr=70800000\0" \
	182	"kernel_addr_r=70800000\0" \
	183	"ramdisk_addr_r=71000000\0" \
93ea89f0 MV	184	"hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
	185	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
	186	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0" \
79656d27 SB	187	"mmcargs=setenv bootargs root=${mmcroot} " \
	188	"rootfstype=${mmcrootfstype}\0" \
	189	"mmcroot=/dev/mmcblk0p3 rw\0" \
	190	"mmcboot=echo Booting from mmc ...; " \
	191	"run mmcargs addip addtty addmtd addmisc mmcload;" \
	192	"bootm\0" \
	193	"mmcload=fatload mmc ${mmcdev}:${mmcpart} " \
	194	"${loadaddr} ${uimage}\0" \
	195	"mmcrootfstype=ext3 rootwait\0" \
	196	"flash_self=run ramargs addip addtty addmtd addmisc;" \
	197	"bootm ${kernel_addr} ${ramdisk_addr}\0" \
	198	"flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
	199	"bootm ${kernel_addr}\0" \
	200	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
	201	"run nfsargs addip addtty addmtd addmisc;" \
	202	"bootm ${kernel_addr_r}\0" \
	203	"net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \
	204	"tftp ${kernel_addr_r} ${bootfile}\0" \
	205	"net_self=if run net_self_load;then " \
	206	"run ramargs addip addtty addmtd addmisc;" \
	207	"bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
	208	"else echo Images not loades;fi\0" \
	209	"satargs=setenv bootargs root=/dev/sda1\0" \
	210	"satafile=boot/uImage\0" \
	211	"ssdboot=echo Booting from ssd ...; " \
	212	"run satargs addip addtty addmtd addmisc;" \
	213	"sata init;ext2load sata 0:1 ${kernel_addr_r} " \
	214	"${satafile};bootm\0" \
93ea89f0	215	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.imx\0" \
79656d27 SB	216	"uimage=uImage\0" \
	217	"load=tftp ${loadaddr} ${u-boot}\0" \
	218	"uboot_addr=0xf0001000\0" \
	219	"update=protect off 0xf0000000 +60000;" \
	220	"erase ${uboot_addr} +60000;" \
	221	"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
	222	"upd=if run load;then echo Updating u-boot;if run update;" \
	223	"then echo U-Boot updated;" \
	224	"else echo Error updating u-boot !;" \
	225	"echo Board without bootloader !!;" \
	226	"fi;" \
	227	"else echo U-Boot not downloaded..exiting;fi\0" \
	228	"bootcmd=run net_nfs\0"
	229
	230
	231	#define CONFIG_CMD_SATA
	232	#ifdef CONFIG_CMD_SATA
	233	#define CONFIG_DWC_AHSATA
	234	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	235	#define CONFIG_DWC_AHSATA_PORT_ID 0
	236	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
	237	#define CONFIG_LBA48
	238	#define CONFIG_LIBATA
	239	#endif
	240
	241	#endif /* __CONFIG_H */