[people/ms/u-boot.git] / include / configs / ls1012a2g5rdb.h

/*
 * Copyright 2017 NXP
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __LS1012A2G5RDB_H__
#define __LS1012A2G5RDB_H__

#include "ls1012a_common.h"

/* PFE Ethernet */
#ifdef CONFIG_FSL_PFE
#define EMAC1_PHY_ADDR          0x2
#define EMAC2_PHY_ADDR          0x1
#define CONFIG_PHYLIB
#define CONFIG_PHYLIB_10G
#define CONFIG_PHY_AQUANTIA
#endif

/* DDR */
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	1
#define CONFIG_NR_DRAM_BANKS		2
#define CONFIG_SYS_SDRAM_SIZE		0x40000000
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

/*  MMC  */
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif

/* SATA */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT

#define CONFIG_SYS_SATA				AHCI_BASE_ADDR

#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
#define CONFIG_SYS_SCSI_MAX_LUN			1
#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
						CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_NET_MULTI

#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		0x9fffffff

#undef CONFIG_EXTRA_ENV_SETTINGS
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"verify=no\0"				\
	"fdt_high=0xffffffffffffffff\0"		\
	"initrd_high=0xffffffffffffffff\0"	\
	"fdt_addr=0x00f00000\0"			\
	"kernel_addr=0x01000000\0"		\
	"kernelheader_addr=0x800000\0"		\
	"scriptaddr=0x80000000\0"		\
	"scripthdraddr=0x80080000\0"		\
	"fdtheader_addr_r=0x80100000\0"		\
	"kernelheader_addr_r=0x80200000\0"	\
	"kernel_addr_r=0x81000000\0"		\
	"fdt_addr_r=0x90000000\0"		\
	"load_addr=0xa0000000\0"		\
	"kernel_size=0x2800000\0"		\
	"kernelheader_size=0x40000\0"		\
	"console=ttyS0,115200\0"		\
	BOOTENV					\
	"boot_scripts=ls1012ardb_boot.scr\0"	\
	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
	"scan_dev_for_boot_part="		\
	     "part list ${devtype} ${devnum} devplist; "	\
	     "env exists devplist || setenv devplist 1; "	\
	     "for distro_bootpart in ${devplist}; do "		\
		  "if fstype ${devtype} "			\
		      "${devnum}:${distro_bootpart} "		\
		      "bootfstype; then "			\
		      "run scan_dev_for_boot; "	\
		  "fi; "			\
	      "done\0"				\
	"scan_dev_for_boot="				  \
		"echo Scanning ${devtype} "		  \
				"${devnum}:${distro_bootpart}...; "  \
		"for prefix in ${boot_prefixes}; do "	  \
			"run scan_dev_for_scripts; "	  \
		"done;"					  \
		"\0"					  \
	"boot_a_script="				  \
		"load ${devtype} ${devnum}:${distro_bootpart} "  \
			"${scriptaddr} ${prefix}${script}; "    \
		"env exists secureboot && load ${devtype} "     \
			"${devnum}:${distro_bootpart} "		\
			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
			"&& esbc_validate ${scripthdraddr};"    \
		"source ${scriptaddr}\0"	  \
	"installer=load mmc 0:2 $load_addr "	\
		   "/flex_installer_arm64.itb; "	\
		   "bootm $load_addr#$board\0"	\
	"qspi_bootcmd=echo Trying load from qspi..;"	\
		"sf probe && sf read $load_addr "	\
		"$kernel_addr $kernel_size; env exists secureboot "	\
		"&& sf read $kernelheader_addr_r $kernelheader_addr "	\
		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
		"bootm $load_addr#$board\0"

#undef CONFIG_BOOTCOMMAND
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
			   "env exists secureboot && esbc_halt;"
#endif

#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"

#include <asm/fsl_secure_boot.h>

#endif /* __LS1012A2G5RDB_H__ */
Commit	Line	Data
b0ce187b BU	1	/*
	2	* Copyright 2017 NXP
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __LS1012A2G5RDB_H__
	8	#define __LS1012A2G5RDB_H__
	9
	10	#include "ls1012a_common.h"
	11
	12	/* PFE Ethernet */
	13	#ifdef CONFIG_FSL_PFE
	14	#define EMAC1_PHY_ADDR 0x2
	15	#define EMAC2_PHY_ADDR 0x1
	16	#define CONFIG_PHYLIB
	17	#define CONFIG_PHYLIB_10G
	18	#define CONFIG_PHY_AQUANTIA
	19	#endif
	20
	21	/* DDR */
	22	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	23	#define CONFIG_CHIP_SELECTS_PER_CTRL 1
	24	#define CONFIG_NR_DRAM_BANKS 2
	25	#define CONFIG_SYS_SDRAM_SIZE 0x40000000
	26	#define CONFIG_CMD_MEMINFO
	27	#define CONFIG_CMD_MEMTEST
	28	#define CONFIG_SYS_MEMTEST_START 0x80000000
	29	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	30
	31	/* MMC */
	32	#ifdef CONFIG_MMC
	33	#define CONFIG_FSL_ESDHC
	34	#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
	35	#endif
	36
	37	/* SATA */
	38	#define CONFIG_LIBATA
	39	#define CONFIG_SCSI_AHCI
	40	#define CONFIG_SCSI_AHCI_PLAT
	41
	42	#define CONFIG_SYS_SATA AHCI_BASE_ADDR
	43
	44	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	45	#define CONFIG_SYS_SCSI_MAX_LUN 1
	46	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	47	CONFIG_SYS_SCSI_MAX_LUN)
	48	#define CONFIG_NET_MULTI
	49
	50	#define CONFIG_CMD_MEMINFO
	51	#define CONFIG_CMD_MEMTEST
	52	#define CONFIG_SYS_MEMTEST_START 0x80000000
	53	#define CONFIG_SYS_MEMTEST_END 0x9fffffff
	54
	55	#undef CONFIG_EXTRA_ENV_SETTINGS
	56	#define CONFIG_EXTRA_ENV_SETTINGS \
	57	"verify=no\0" \
	58	"fdt_high=0xffffffffffffffff\0" \
	59	"initrd_high=0xffffffffffffffff\0" \
	60	"fdt_addr=0x00f00000\0" \
	61	"kernel_addr=0x01000000\0" \
	62	"kernelheader_addr=0x800000\0" \
	63	"scriptaddr=0x80000000\0" \
	64	"scripthdraddr=0x80080000\0" \
65	"fdtheader_addr_r=0x80100000\0" \
66	"kernelheader_addr_r=0x80200000\0" \
67	"kernel_addr_r=0x81000000\0" \
68	"fdt_addr_r=0x90000000\0" \
69	"load_addr=0xa0000000\0" \
70	"kernel_size=0x2800000\0" \
71	"kernelheader_size=0x40000\0" \
72	"console=ttyS0,115200\0" \
73	BOOTENV \
74	"boot_scripts=ls1012ardb_boot.scr\0" \
75	"boot_script_hdr=hdr_ls1012ardb_bs.out\0" \
76	"scan_dev_for_boot_part=" \
77	"part list ${devtype} ${devnum} devplist; " \
78	"env exists devplist \|\| setenv devplist 1; " \
79	"for distro_bootpart in ${devplist}; do " \
80	"if fstype ${devtype} " \
81	"${devnum}:${distro_bootpart} " \
82	"bootfstype; then " \
83	"run scan_dev_for_boot; " \
84	"fi; " \
85	"done\0" \
86	"scan_dev_for_boot=" \
87	"echo Scanning ${devtype} " \
88	"${devnum}:${distro_bootpart}...; " \
89	"for prefix in ${boot_prefixes}; do " \
90	"run scan_dev_for_scripts; " \
91	"done;" \
92	"\0" \
93	"boot_a_script=" \
94	"load ${devtype} ${devnum}:${distro_bootpart} " \
95	"${scriptaddr} ${prefix}${script}; " \
96	"env exists secureboot && load ${devtype} " \
97	"${devnum}:${distro_bootpart} " \
98	"${scripthdraddr} ${prefix}${boot_script_hdr} " \
99	"&& esbc_validate ${scripthdraddr};" \
100	"source ${scriptaddr}\0" \
101	"installer=load mmc 0:2 $load_addr " \
102	"/flex_installer_arm64.itb; " \
103	"bootm $load_addr#$board\0" \
104	"qspi_bootcmd=echo Trying load from qspi..;" \
105	"sf probe && sf read $load_addr " \
106	"$kernel_addr $kernel_size; env exists secureboot " \
107	"&& sf read $kernelheader_addr_r $kernelheader_addr " \
108	"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
109	"bootm $load_addr#$board\0"
110
111	#undef CONFIG_BOOTCOMMAND
112	#if defined(CONFIG_QSPI_BOOT) \|\| defined(CONFIG_SD_BOOT_QSPI)
113	#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \
114	"env exists secureboot && esbc_halt;"
115	#endif
116
117	#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
118	#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
119
120	#include <asm/fsl_secure_boot.h>
121
122	#endif /* __LS1012A2G5RDB_H__ */