]>
Commit | Line | Data |
---|---|---|
f3a8e2b7 MH |
1 | /* |
2 | * Copyright (C) 2015 Freescale Semiconductor | |
3 | * | |
4 | * SPDX-License-Identifier: GPL-2.0+ | |
5 | */ | |
6 | ||
7 | #ifndef __LS1043A_COMMON_H | |
8 | #define __LS1043A_COMMON_H | |
9 | ||
4139b170 SG |
10 | /* SPL build */ |
11 | #ifdef CONFIG_SPL_BUILD | |
12 | #define SPL_NO_FMAN | |
13 | #define SPL_NO_DSPI | |
14 | #define SPL_NO_PCIE | |
15 | #define SPL_NO_ENV | |
16 | #define SPL_NO_MISC | |
17 | #define SPL_NO_USB | |
18 | #define SPL_NO_SATA | |
19 | #define SPL_NO_QE | |
20 | #define SPL_NO_EEPROM | |
21 | #endif | |
22 | #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) | |
23 | #define SPL_NO_MMC | |
24 | #endif | |
25 | #if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT)) | |
26 | #define SPL_NO_IFC | |
27 | #endif | |
28 | ||
f3a8e2b7 MH |
29 | #define CONFIG_REMAKE_ELF |
30 | #define CONFIG_FSL_LAYERSCAPE | |
831c068f | 31 | #define CONFIG_MP |
f3a8e2b7 MH |
32 | #define CONFIG_GICV2 |
33 | ||
5344c7b7 | 34 | #include <asm/arch/stream_id_lsch2.h> |
f3a8e2b7 | 35 | #include <asm/arch/config.h> |
f3a8e2b7 MH |
36 | |
37 | /* Link Definitions */ | |
38 | #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) | |
39 | ||
40 | #define CONFIG_SUPPORT_RAW_INITRD | |
41 | ||
42 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
f3a8e2b7 | 43 | |
f3a8e2b7 MH |
44 | #define CONFIG_VERY_BIG_RAM |
45 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 | |
46 | #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 | |
47 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
e994dddb | 48 | #define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL |
f3a8e2b7 | 49 | |
831c068f HZ |
50 | #define CPU_RELEASE_ADDR secondary_boot_func |
51 | ||
f3a8e2b7 MH |
52 | /* Generic Timer Definitions */ |
53 | #define COUNTER_FREQUENCY 25000000 /* 25MHz */ | |
54 | ||
55 | /* Size of malloc() pool */ | |
56 | #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) | |
57 | ||
58 | /* Serial Port */ | |
59 | #define CONFIG_CONS_INDEX 1 | |
f3a8e2b7 MH |
60 | #define CONFIG_SYS_NS16550_SERIAL |
61 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
904110c7 | 62 | #define CONFIG_SYS_NS16550_CLK (get_serial_clock()) |
f3a8e2b7 | 63 | |
f3a8e2b7 MH |
64 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
65 | ||
c7ca8b07 GQ |
66 | /* SD boot SPL */ |
67 | #ifdef CONFIG_SD_BOOT | |
68 | #define CONFIG_SPL_FRAMEWORK | |
69 | #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" | |
70 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
c7ca8b07 GQ |
71 | |
72 | #define CONFIG_SPL_TEXT_BASE 0x10000000 | |
70f9661c | 73 | #define CONFIG_SPL_MAX_SIZE 0x17000 |
c7ca8b07 GQ |
74 | #define CONFIG_SPL_STACK 0x1001e000 |
75 | #define CONFIG_SPL_PAD_TO 0x1d000 | |
76 | ||
77 | #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ | |
78 | CONFIG_SYS_MONITOR_LEN) | |
79 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 | |
80 | #define CONFIG_SPL_BSS_START_ADDR 0x80100000 | |
81 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 | |
70f9661c RG |
82 | |
83 | #ifdef CONFIG_SECURE_BOOT | |
84 | #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) | |
85 | /* | |
86 | * HDR would be appended at end of image and copied to DDR along | |
87 | * with U-Boot image. Here u-boot max. size is 512K. So if binary | |
88 | * size increases then increase this size in case of secure boot as | |
89 | * it uses raw u-boot image instead of fit image. | |
90 | */ | |
91 | #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) | |
92 | #else | |
93 | #define CONFIG_SYS_MONITOR_LEN 0x100000 | |
94 | #endif /* ifdef CONFIG_SECURE_BOOT */ | |
c7ca8b07 GQ |
95 | #endif |
96 | ||
3ad44729 GQ |
97 | /* NAND SPL */ |
98 | #ifdef CONFIG_NAND_BOOT | |
99 | #define CONFIG_SPL_PBL_PAD | |
100 | #define CONFIG_SPL_FRAMEWORK | |
101 | #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" | |
102 | #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" | |
3ad44729 GQ |
103 | #define CONFIG_SPL_TEXT_BASE 0x10000000 |
104 | #define CONFIG_SPL_MAX_SIZE 0x1a000 | |
105 | #define CONFIG_SPL_STACK 0x1001d000 | |
106 | #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE | |
107 | #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE | |
108 | #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 | |
109 | #define CONFIG_SPL_BSS_START_ADDR 0x80100000 | |
110 | #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 | |
111 | #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 | |
762f92a6 RG |
112 | |
113 | #ifdef CONFIG_SECURE_BOOT | |
114 | #define CONFIG_U_BOOT_HDR_SIZE (16 << 10) | |
115 | #endif /* ifdef CONFIG_SECURE_BOOT */ | |
116 | ||
117 | #ifdef CONFIG_U_BOOT_HDR_SIZE | |
118 | /* | |
119 | * HDR would be appended at end of image and copied to DDR along | |
120 | * with U-Boot image. Here u-boot max. size is 512K. So if binary | |
121 | * size increases then increase this size in case of secure boot as | |
122 | * it uses raw u-boot image instead of fit image. | |
123 | */ | |
124 | #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) | |
125 | #else | |
126 | #define CONFIG_SYS_MONITOR_LEN 0x100000 | |
127 | #endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ | |
128 | ||
3ad44729 GQ |
129 | #endif |
130 | ||
f3a8e2b7 | 131 | /* IFC */ |
4139b170 | 132 | #ifndef SPL_NO_IFC |
b0f20caf | 133 | #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) |
f3a8e2b7 MH |
134 | #define CONFIG_FSL_IFC |
135 | /* | |
136 | * CONFIG_SYS_FLASH_BASE has the final address (core view) | |
137 | * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) | |
138 | * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address | |
139 | * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting | |
140 | */ | |
141 | #define CONFIG_SYS_FLASH_BASE 0x60000000 | |
142 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
143 | #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 | |
144 | ||
e856bdcf | 145 | #ifdef CONFIG_MTD_NOR_FLASH |
f3a8e2b7 MH |
146 | #define CONFIG_FLASH_CFI_DRIVER |
147 | #define CONFIG_SYS_FLASH_CFI | |
148 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
149 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
150 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
151 | #endif | |
166ef1e9 | 152 | #endif |
4139b170 | 153 | #endif |
f3a8e2b7 MH |
154 | |
155 | /* I2C */ | |
f3a8e2b7 MH |
156 | #define CONFIG_SYS_I2C |
157 | #define CONFIG_SYS_I2C_MXC | |
158 | #define CONFIG_SYS_I2C_MXC_I2C1 | |
159 | #define CONFIG_SYS_I2C_MXC_I2C2 | |
160 | #define CONFIG_SYS_I2C_MXC_I2C3 | |
161 | #define CONFIG_SYS_I2C_MXC_I2C4 | |
162 | ||
163 | /* PCIe */ | |
4139b170 | 164 | #ifndef SPL_NO_PCIE |
f3a8e2b7 MH |
165 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
166 | #define CONFIG_PCIE2 /* PCIE controller 2 */ | |
167 | #define CONFIG_PCIE3 /* PCIE controller 3 */ | |
f3a8e2b7 | 168 | |
f3a8e2b7 MH |
169 | #ifdef CONFIG_PCI |
170 | #define CONFIG_NET_MULTI | |
f3a8e2b7 MH |
171 | #define CONFIG_PCI_SCAN_SHOW |
172 | #define CONFIG_CMD_PCI | |
173 | #endif | |
4139b170 | 174 | #endif |
f3a8e2b7 MH |
175 | |
176 | /* Command line configuration */ | |
f3a8e2b7 | 177 | |
8ef0d5c4 | 178 | /* MMC */ |
4139b170 | 179 | #ifndef SPL_NO_MMC |
8ef0d5c4 | 180 | #ifdef CONFIG_MMC |
8ef0d5c4 YL |
181 | #define CONFIG_FSL_ESDHC |
182 | #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 | |
8ef0d5c4 | 183 | #endif |
4139b170 | 184 | #endif |
8ef0d5c4 | 185 | |
e0579a58 | 186 | /* DSPI */ |
4139b170 | 187 | #ifndef SPL_NO_DSPI |
e0579a58 GQ |
188 | #define CONFIG_FSL_DSPI |
189 | #ifdef CONFIG_FSL_DSPI | |
e0579a58 GQ |
190 | #define CONFIG_DM_SPI_FLASH |
191 | #define CONFIG_SPI_FLASH_STMICRO /* cs0 */ | |
192 | #define CONFIG_SPI_FLASH_SST /* cs1 */ | |
193 | #define CONFIG_SPI_FLASH_EON /* cs2 */ | |
b0f20caf | 194 | #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) |
e0579a58 GQ |
195 | #define CONFIG_SF_DEFAULT_BUS 1 |
196 | #define CONFIG_SF_DEFAULT_CS 0 | |
197 | #endif | |
166ef1e9 | 198 | #endif |
4139b170 | 199 | #endif |
e0579a58 | 200 | |
e8297341 | 201 | /* FMan ucode */ |
4139b170 | 202 | #ifndef SPL_NO_FMAN |
e8297341 SX |
203 | #define CONFIG_SYS_DPAA_FMAN |
204 | #ifdef CONFIG_SYS_DPAA_FMAN | |
205 | #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 | |
206 | ||
fd1b147c | 207 | #ifdef CONFIG_NAND_BOOT |
a9a5cef3 | 208 | /* Store Fman ucode at offeset 0x900000(72 blocks). */ |
fd1b147c | 209 | #define CONFIG_SYS_QE_FMAN_FW_IN_NAND |
a9a5cef3 | 210 | #define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) |
2a555839 QG |
211 | #elif defined(CONFIG_SD_BOOT) |
212 | /* | |
213 | * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is | |
214 | * about 1MB (2040 blocks), Env is stored after the image, and the env size is | |
a9a5cef3 | 215 | * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800). |
2a555839 QG |
216 | */ |
217 | #define CONFIG_SYS_QE_FMAN_FW_IN_MMC | |
a9a5cef3 | 218 | #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) |
5aa03ddd | 219 | #define CONFIG_SYS_QE_FW_ADDR (512 * 0x4a08) |
2a555839 | 220 | #elif defined(CONFIG_QSPI_BOOT) |
166ef1e9 | 221 | #define CONFIG_SYS_QE_FW_IN_SPIFLASH |
a9a5cef3 | 222 | #define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 |
166ef1e9 GQ |
223 | #define CONFIG_ENV_SPI_BUS 0 |
224 | #define CONFIG_ENV_SPI_CS 0 | |
225 | #define CONFIG_ENV_SPI_MAX_HZ 1000000 | |
226 | #define CONFIG_ENV_SPI_MODE 0x03 | |
227 | #else | |
e8297341 SX |
228 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR |
229 | /* FMan fireware Pre-load address */ | |
a9a5cef3 | 230 | #define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 |
5aa03ddd | 231 | #define CONFIG_SYS_QE_FW_ADDR 0x60940000 |
166ef1e9 | 232 | #endif |
e8297341 SX |
233 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
234 | #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) | |
235 | #endif | |
4139b170 | 236 | #endif |
e8297341 | 237 | |
f3a8e2b7 MH |
238 | /* Miscellaneous configurable options */ |
239 | #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) | |
f3a8e2b7 MH |
240 | |
241 | #define CONFIG_HWCONFIG | |
242 | #define HWCONFIG_BUFFER_SIZE 128 | |
243 | ||
4139b170 | 244 | #ifndef SPL_NO_MISC |
dbe18f16 WS |
245 | #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) |
246 | #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \ | |
247 | "5m(kernel),1m(dtb),9m(file_system)" | |
248 | #else | |
7f339632 WS |
249 | #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:" \ |
250 | "2m@0x100000(nor_bank0_uboot),"\ | |
251 | "40m@0x1100000(nor_bank0_fit)," \ | |
252 | "7m(nor_bank0_user)," \ | |
253 | "2m@0x4100000(nor_bank4_uboot)," \ | |
254 | "40m@0x5100000(nor_bank4_fit),"\ | |
255 | "-(nor_bank4_user);" \ | |
256 | "7e800000.flash:" \ | |
dbe18f16 WS |
257 | "1m(nand_uboot),1m(nand_uboot_env)," \ |
258 | "20m(nand_fit);spi0.0:1m(uboot)," \ | |
259 | "5m(kernel),1m(dtb),9m(file_system)" | |
260 | #endif | |
261 | ||
5ba909f4 SL |
262 | #include <config_distro_defaults.h> |
263 | #ifndef CONFIG_SPL_BUILD | |
264 | #define BOOT_TARGET_DEVICES(func) \ | |
265 | func(MMC, mmc, 0) \ | |
266 | func(USB, usb, 0) | |
267 | #include <config_distro_bootcmd.h> | |
268 | #endif | |
269 | ||
f3a8e2b7 MH |
270 | /* Initial environment variables */ |
271 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
272 | "hwconfig=fsl_ddr:bank_intlv=auto\0" \ | |
f3a8e2b7 MH |
273 | "fdt_high=0xffffffffffffffff\0" \ |
274 | "initrd_high=0xffffffffffffffff\0" \ | |
5ba909f4 SL |
275 | "fdt_addr=0x64f00000\0" \ |
276 | "kernel_addr=0x65000000\0" \ | |
277 | "scriptaddr=0x80000000\0" \ | |
76bbf1c6 | 278 | "scripthdraddr=0x80080000\0" \ |
5ba909f4 SL |
279 | "fdtheader_addr_r=0x80100000\0" \ |
280 | "kernelheader_addr_r=0x80200000\0" \ | |
281 | "kernel_addr_r=0x81000000\0" \ | |
282 | "fdt_addr_r=0x90000000\0" \ | |
283 | "load_addr=0xa0000000\0" \ | |
ad6767b6 | 284 | "kernel_size=0x2800000\0" \ |
5ba909f4 SL |
285 | "console=ttyS0,115200\0" \ |
286 | "mtdparts=" MTDPARTS_DEFAULT "\0" \ | |
287 | BOOTENV \ | |
288 | "boot_scripts=ls1043ardb_boot.scr\0" \ | |
76bbf1c6 | 289 | "boot_script_hdr=hdr_ls1043ardb_bs.out\0" \ |
5ba909f4 SL |
290 | "scan_dev_for_boot_part=" \ |
291 | "part list ${devtype} ${devnum} devplist; " \ | |
292 | "env exists devplist || setenv devplist 1; " \ | |
293 | "for distro_bootpart in ${devplist}; do " \ | |
294 | "if fstype ${devtype} " \ | |
295 | "${devnum}:${distro_bootpart} " \ | |
296 | "bootfstype; then " \ | |
297 | "run scan_dev_for_boot; " \ | |
298 | "fi; " \ | |
299 | "done\0" \ | |
76bbf1c6 SG |
300 | "scan_dev_for_boot=" \ |
301 | "echo Scanning ${devtype} " \ | |
302 | "${devnum}:${distro_bootpart}...; " \ | |
303 | "for prefix in ${boot_prefixes}; do " \ | |
304 | "run scan_dev_for_scripts; " \ | |
305 | "done;\0" \ | |
306 | "boot_a_script=" \ | |
307 | "load ${devtype} ${devnum}:${distro_bootpart} " \ | |
308 | "${scriptaddr} ${prefix}${script}; " \ | |
309 | "env exists secureboot && load ${devtype} " \ | |
310 | "${devnum}:${distro_bootpart} " \ | |
311 | "${scripthdraddr} ${prefix}${boot_script_hdr} " \ | |
312 | "&& esbc_validate ${scripthdraddr};" \ | |
313 | "source ${scriptaddr}\0" \ | |
5ba909f4 SL |
314 | "installer=load mmc 0:2 $load_addr " \ |
315 | "/flex_installer_arm64.itb; " \ | |
316 | "bootm $load_addr#ls1043ardb\0" \ | |
317 | "qspi_bootcmd=echo Trying load from qspi..;" \ | |
318 | "sf probe && sf read $load_addr " \ | |
319 | "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \ | |
320 | "nor_bootcmd=echo Trying load from nor..;" \ | |
321 | "cp.b $kernel_addr $load_addr " \ | |
322 | "$kernel_size && bootm $load_addr#$board\0" | |
323 | ||
324 | #undef CONFIG_BOOTCOMMAND | |
325 | #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) | |
76bbf1c6 SG |
326 | #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \ |
327 | "&& esbc_halt; run qspi_bootcmd;" | |
5ba909f4 | 328 | #else |
76bbf1c6 SG |
329 | #define CONFIG_BOOTCOMMAND "run distro_bootcmd; env exists secureboot" \ |
330 | "&& esbc_halt; run nor_bootcmd;" | |
5ba909f4 | 331 | #endif |
f3a8e2b7 MH |
332 | |
333 | #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ | |
dbe18f16 WS |
334 | "earlycon=uart8250,mmio,0x21c0500 " \ |
335 | MTDPARTS_DEFAULT | |
4139b170 | 336 | #endif |
f3a8e2b7 MH |
337 | |
338 | /* Monitor Command Prompt */ | |
339 | #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ | |
f3a8e2b7 MH |
340 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ |
341 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
f3a8e2b7 MH |
342 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ |
343 | #define CONFIG_SYS_LONGHELP | |
4139b170 SG |
344 | |
345 | #ifndef SPL_NO_MISC | |
5ba909f4 | 346 | #ifndef CONFIG_CMDLINE_EDITING |
f3a8e2b7 | 347 | #define CONFIG_CMDLINE_EDITING 1 |
4139b170 | 348 | #endif |
5ba909f4 | 349 | #endif |
4139b170 | 350 | |
f3a8e2b7 MH |
351 | #define CONFIG_AUTO_COMPLETE |
352 | #define CONFIG_SYS_MAXARGS 64 /* max command args */ | |
353 | ||
354 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
355 | ||
457e51cf SG |
356 | #include <asm/arch/soc.h> |
357 | ||
f3a8e2b7 | 358 | #endif /* __LS1043A_COMMON_H */ |