[people/ms/u-boot.git] / include / configs / ls1046a_common.h

/*
 * Copyright 2016 Freescale Semiconductor
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __LS1046A_COMMON_H
#define __LS1046A_COMMON_H

/* SPL build */
#ifdef CONFIG_SPL_BUILD
#define SPL_NO_QBMAN
#define SPL_NO_FMAN
#define SPL_NO_ENV
#define SPL_NO_MISC
#define SPL_NO_QSPI
#define SPL_NO_USB
#define SPL_NO_SATA
#endif
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
#define SPL_NO_MMC
#endif
#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT))
#define SPL_NO_IFC
#endif

#define CONFIG_REMAKE_ELF
#define CONFIG_FSL_LAYERSCAPE
#define CONFIG_MP
#define CONFIG_GICV2

#include <asm/arch/config.h>
#include <asm/arch/stream_id_lsch2.h>

/* Link Definitions */
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)

#define CONFIG_SUPPORT_RAW_INITRD

#define CONFIG_SKIP_LOWLEVEL_INIT

#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL

#define CPU_RELEASE_ADDR               secondary_boot_func

/* Generic Timer Definitions */
#define COUNTER_FREQUENCY		25000000	/* 25MHz */

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1024 * 1024)

/* Serial Port */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK          (get_serial_clock())

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }

/* SD boot SPL */
#ifdef CONFIG_SD_BOOT
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT

#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_TEXT_BASE		0x10000000
#define CONFIG_SPL_MAX_SIZE		0x1f000		/* 124 KiB */
#define CONFIG_SPL_STACK		0x10020000
#define CONFIG_SPL_PAD_TO		0x21000		/* 132 KiB */
#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
					CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

#ifdef CONFIG_SECURE_BOOT
#define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
/*
 * HDR would be appended at end of image and copied to DDR along
 * with U-Boot image. Here u-boot max. size is 512K. So if binary
 * size increases then increase this size in case of secure boot as
 * it uses raw u-boot image instead of fit image.
 */
#define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
#else
#define CONFIG_SYS_MONITOR_LEN		0x100000
#endif /* ifdef CONFIG_SECURE_BOOT */
#endif

/* NAND SPL */
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SPL_PBL_PAD
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT

#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_TEXT_BASE		0x10000000
#define CONFIG_SPL_MAX_SIZE		0x17000		/* 90 KiB */
#define CONFIG_SPL_STACK		0x1001f000
#define CONFIG_SYS_NAND_U_BOOT_DST	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE

#define CONFIG_SPL_BSS_START_ADDR	0x8f000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_BSS_START_ADDR + \
					CONFIG_SPL_BSS_MAX_SIZE)
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
#define CONFIG_SYS_MONITOR_LEN		0xa0000
#endif

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_MXC_I2C2
#define CONFIG_SYS_I2C_MXC_I2C3
#define CONFIG_SYS_I2C_MXC_I2C4

/* PCIe */
#define CONFIG_PCIE1		/* PCIE controller 1 */
#define CONFIG_PCIE2		/* PCIE controller 2 */
#define CONFIG_PCIE3		/* PCIE controller 3 */

#ifdef CONFIG_PCI
#define CONFIG_PCI_SCAN_SHOW
#endif

/* Command line configuration */

/* MMC */
#ifndef SPL_NO_MMC
#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif
#endif

#ifndef SPL_NO_QBMAN
#define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
#endif

/* FMan ucode */
#ifndef SPL_NO_FMAN
#define CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
#endif

#ifdef CONFIG_SD_BOOT
/*
 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 * about 1MB (2048 blocks), Env is stored after the image, and the env size is
 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
 */
#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
#define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_SYS_QE_FW_IN_SPIFLASH
#define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
#define CONFIG_ENV_SPI_BUS		0
#define CONFIG_ENV_SPI_CS		0
#define CONFIG_ENV_SPI_MAX_HZ		1000000
#define CONFIG_ENV_SPI_MODE		0x03
#elif defined(CONFIG_NAND_BOOT)
#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
#define CONFIG_SYS_FMAN_FW_ADDR		(36 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
#define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
#endif
#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
#endif

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)

#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE		128

#include <config_distro_defaults.h>
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0)
#include <config_distro_bootcmd.h>
#endif

#ifndef SPL_NO_MISC
/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS		\
	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
	"ramdisk_addr=0x800000\0"		\
	"ramdisk_size=0x2000000\0"		\
	"fdt_high=0xffffffffffffffff\0"		\
	"initrd_high=0xffffffffffffffff\0"	\
	"fdt_addr=0x64f00000\0"                 \
	"kernel_addr=0x65000000\0"              \
	"scriptaddr=0x80000000\0"               \
	"scripthdraddr=0x80080000\0"		\
	"fdtheader_addr_r=0x80100000\0"         \
	"kernelheader_addr_r=0x80200000\0"      \
	"load_addr=0xa0000000\0"            \
	"kernel_addr_r=0x81000000\0"            \
	"fdt_addr_r=0x90000000\0"               \
	"ramdisk_addr_r=0xa0000000\0"           \
	"kernel_start=0x1000000\0"		\
	"kernelheader_start=0x800000\0"		\
	"kernel_load=0xa0000000\0"		\
	"kernel_size=0x2800000\0"		\
	"kernelheader_size=0x40000\0"		\
	"kernel_addr_sd=0x8000\0"		\
	"kernel_size_sd=0x14000\0"		\
	"kernelhdr_addr_sd=0x4000\0"		\
	"kernelhdr_size_sd=0x10\0"		\
	"console=ttyS0,115200\0"                \
	 CONFIG_MTDPARTS_DEFAULT "\0"		\
	BOOTENV					\
	"boot_scripts=ls1046ardb_boot.scr\0"    \
	"boot_script_hdr=hdr_ls1046ardb_bs.out\0"	\
	"scan_dev_for_boot_part="               \
		"part list ${devtype} ${devnum} devplist; "   \
		"env exists devplist || setenv devplist 1; "  \
		"for distro_bootpart in ${devplist}; do "     \
		  "if fstype ${devtype} "                  \
			"${devnum}:${distro_bootpart} "      \
			"bootfstype; then "                  \
			"run scan_dev_for_boot; "            \
		  "fi; "                                   \
		"done\0"                                   \
	"scan_dev_for_boot="				  \
		"echo Scanning ${devtype} "		  \
				"${devnum}:${distro_bootpart}...; "  \
		"for prefix in ${boot_prefixes}; do "	  \
			"run scan_dev_for_scripts; "	  \
		"done;"					  \
		"\0"					  \
	"boot_a_script="				  \
		"load ${devtype} ${devnum}:${distro_bootpart} "  \
			"${scriptaddr} ${prefix}${script}; "    \
		"env exists secureboot && load ${devtype} "     \
			"${devnum}:${distro_bootpart} "		\
			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
			"&& esbc_validate ${scripthdraddr};"    \
		"source ${scriptaddr}\0"	  \
	"qspi_bootcmd=echo Trying load from qspi..;"      \
		"sf probe && sf read $load_addr "         \
		"$kernel_start $kernel_size; env exists secureboot "	\
		"&& sf read $kernelheader_addr_r $kernelheader_start "	\
		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
		"bootm $load_addr#$board\0"		\
	"sd_bootcmd=echo Trying load from SD ..;"	\
		"mmcinfo; mmc read $load_addr "		\
		"$kernel_addr_sd $kernel_size_sd && "	\
		"env exists secureboot && mmc read $kernelheader_addr_r "		\
		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
		" && esbc_validate ${kernelheader_addr_r};"	\
		"bootm $load_addr#$board\0"

#endif

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
#define CONFIG_SYS_LONGHELP

#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS		64	/* max command args */

#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */

#include <asm/arch/soc.h>

#endif /* __LS1046A_COMMON_H */
Commit	Line	Data
dd02936f MH	1	/*
	2	* Copyright 2016 Freescale Semiconductor
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __LS1046A_COMMON_H
	8	#define __LS1046A_COMMON_H
	9
a52ff334 SG	10	/* SPL build */
	11	#ifdef CONFIG_SPL_BUILD
	12	#define SPL_NO_QBMAN
	13	#define SPL_NO_FMAN
	14	#define SPL_NO_ENV
	15	#define SPL_NO_MISC
	16	#define SPL_NO_QSPI
	17	#define SPL_NO_USB
	18	#define SPL_NO_SATA
	19	#endif
	20	#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
	21	#define SPL_NO_MMC
	22	#endif
	23	#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT))
	24	#define SPL_NO_IFC
	25	#endif
	26
dd02936f MH	27	#define CONFIG_REMAKE_ELF
dd02936f MH	28	#define CONFIG_FSL_LAYERSCAPE
dd02936f	29	#define CONFIG_MP
dd02936f MH	30	#define CONFIG_GICV2
	31
	32	#include <asm/arch/config.h>
b52a0507	33	#include <asm/arch/stream_id_lsch2.h>
dd02936f MH	34
	35	/* Link Definitions */
	36	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
	37
	38	#define CONFIG_SUPPORT_RAW_INITRD
	39
	40	#define CONFIG_SKIP_LOWLEVEL_INIT
dd02936f MH	41
	42	#define CONFIG_VERY_BIG_RAM
	43	#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
	44	#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
	45	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	46	#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL
	47
	48	#define CPU_RELEASE_ADDR secondary_boot_func
	49
	50	/* Generic Timer Definitions */
	51	#define COUNTER_FREQUENCY 25000000 /* 25MHz */
	52
	53	/* Size of malloc() pool */
	54	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
	55
	56	/* Serial Port */
	57	#define CONFIG_CONS_INDEX 1
	58	#define CONFIG_SYS_NS16550_SERIAL
	59	#define CONFIG_SYS_NS16550_REG_SIZE 1
904110c7	60	#define CONFIG_SYS_NS16550_CLK (get_serial_clock())
dd02936f	61
dd02936f MH	62	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	63
	64	/* SD boot SPL */
	65	#ifdef CONFIG_SD_BOOT
	66	#define CONFIG_SPL_FRAMEWORK
dd02936f MH	67	#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
	68	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	69	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	70	#define CONFIG_SPL_ENV_SUPPORT
	71	#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
	72	#define CONFIG_SPL_WATCHDOG_SUPPORT
	73	#define CONFIG_SPL_I2C_SUPPORT
	74	#define CONFIG_SPL_SERIAL_SUPPORT
	75	#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
	76
	77	#define CONFIG_SPL_MMC_SUPPORT
dd02936f MH	78	#define CONFIG_SPL_TEXT_BASE 0x10000000
	79	#define CONFIG_SPL_MAX_SIZE 0x1f000 /* 124 KiB */
	80	#define CONFIG_SPL_STACK 0x10020000
	81	#define CONFIG_SPL_PAD_TO 0x21000 /* 132 KiB */
	82	#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
	83	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	84	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
	85	CONFIG_SPL_BSS_MAX_SIZE)
	86	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
511fc86d RG	87
	88	#ifdef CONFIG_SECURE_BOOT
	89	#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
	90	/*
	91	* HDR would be appended at end of image and copied to DDR along
	92	* with U-Boot image. Here u-boot max. size is 512K. So if binary
	93	* size increases then increase this size in case of secure boot as
	94	* it uses raw u-boot image instead of fit image.
	95	*/
	96	#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
	97	#else
	98	#define CONFIG_SYS_MONITOR_LEN 0x100000
	99	#endif /* ifdef CONFIG_SECURE_BOOT */
dd02936f MH	100	#endif
dd02936f MH	101
126fe70d SX	102	/* NAND SPL */
	103	#ifdef CONFIG_NAND_BOOT
	104	#define CONFIG_SPL_PBL_PAD
	105	#define CONFIG_SPL_FRAMEWORK
126fe70d SX	106	#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
	107	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	108	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	109	#define CONFIG_SPL_ENV_SUPPORT
	110	#define CONFIG_SPL_WATCHDOG_SUPPORT
	111	#define CONFIG_SPL_I2C_SUPPORT
	112	#define CONFIG_SPL_SERIAL_SUPPORT
	113	#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
	114
	115	#define CONFIG_SPL_NAND_SUPPORT
	116	#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
	117	#define CONFIG_SPL_TEXT_BASE 0x10000000
511fc86d	118	#define CONFIG_SPL_MAX_SIZE 0x17000 /* 90 KiB */
126fe70d SX	119	#define CONFIG_SPL_STACK 0x1001f000
	120	#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
	121	#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
	122
	123	#define CONFIG_SPL_BSS_START_ADDR 0x8f000000
	124	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
	125	#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \
	126	CONFIG_SPL_BSS_MAX_SIZE)
	127	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
	128	#define CONFIG_SYS_MONITOR_LEN 0xa0000
	129	#endif
	130
dd02936f MH	131	/* I2C */
	132	#define CONFIG_SYS_I2C
	133	#define CONFIG_SYS_I2C_MXC
	134	#define CONFIG_SYS_I2C_MXC_I2C1
	135	#define CONFIG_SYS_I2C_MXC_I2C2
	136	#define CONFIG_SYS_I2C_MXC_I2C3
	137	#define CONFIG_SYS_I2C_MXC_I2C4
	138
3098e539 HZ	139	/* PCIe */
	140	#define CONFIG_PCIE1 /* PCIE controller 1 */
	141	#define CONFIG_PCIE2 /* PCIE controller 2 */
	142	#define CONFIG_PCIE3 /* PCIE controller 3 */
	143
	144	#ifdef CONFIG_PCI
	145	#define CONFIG_PCI_SCAN_SHOW
3098e539 HZ	146	#endif
3098e539 HZ	147
dd02936f	148	/* Command line configuration */
dd02936f MH	149
dd02936f MH	150	/* MMC */
a52ff334	151	#ifndef SPL_NO_MMC
dd02936f MH	152	#ifdef CONFIG_MMC
	153	#define CONFIG_FSL_ESDHC
	154	#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
dd02936f	155	#endif
a52ff334	156	#endif
dd02936f	157
a52ff334	158	#ifndef SPL_NO_QBMAN
dd02936f	159	#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
a52ff334	160	#endif
dd02936f MH	161
dd02936f MH	162	/* FMan ucode */
a52ff334	163	#ifndef SPL_NO_FMAN
dd02936f MH	164	#define CONFIG_SYS_DPAA_FMAN
	165	#ifdef CONFIG_SYS_DPAA_FMAN
	166	#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
a52ff334	167	#endif
dd02936f MH	168
	169	#ifdef CONFIG_SD_BOOT
	170	/*
	171	* PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
	172	* about 1MB (2048 blocks), Env is stored after the image, and the env size is
8104deb2	173	* 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800).
dd02936f MH	174	*/
dd02936f MH	175	#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
8104deb2	176	#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800)
126fe70d	177	#elif defined(CONFIG_QSPI_BOOT)
dd02936f	178	#define CONFIG_SYS_QE_FW_IN_SPIFLASH
8104deb2	179	#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000
dd02936f MH	180	#define CONFIG_ENV_SPI_BUS 0
	181	#define CONFIG_ENV_SPI_CS 0
	182	#define CONFIG_ENV_SPI_MAX_HZ 1000000
	183	#define CONFIG_ENV_SPI_MODE 0x03
126fe70d SX	184	#elif defined(CONFIG_NAND_BOOT)
126fe70d SX	185	#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
752513d8	186	#define CONFIG_SYS_FMAN_FW_ADDR (36 * CONFIG_SYS_NAND_BLOCK_SIZE)
126fe70d SX	187	#else
126fe70d SX	188	#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
8104deb2	189	#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000
dd02936f MH	190	#endif
	191	#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
	192	#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
	193	#endif
	194
	195	/* Miscellaneous configurable options */
	196	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
dd02936f MH	197
	198	#define CONFIG_HWCONFIG
	199	#define HWCONFIG_BUFFER_SIZE 128
	200
8de227ee QG	201	#include <config_distro_defaults.h>
	202	#ifndef CONFIG_SPL_BUILD
	203	#define BOOT_TARGET_DEVICES(func) \
	204	func(MMC, mmc, 0) \
	205	func(USB, usb, 0)
	206	#include <config_distro_bootcmd.h>
	207	#endif
	208
a52ff334	209	#ifndef SPL_NO_MISC
dd02936f MH	210	/* Initial environment variables */
	211	#define CONFIG_EXTRA_ENV_SETTINGS \
	212	"hwconfig=fsl_ddr:bank_intlv=auto\0" \
dd02936f MH	213	"ramdisk_addr=0x800000\0" \
	214	"ramdisk_size=0x2000000\0" \
	215	"fdt_high=0xffffffffffffffff\0" \
	216	"initrd_high=0xffffffffffffffff\0" \
8de227ee QG	217	"fdt_addr=0x64f00000\0" \
	218	"kernel_addr=0x65000000\0" \
	219	"scriptaddr=0x80000000\0" \
f7b75f8b	220	"scripthdraddr=0x80080000\0" \
8de227ee QG	221	"fdtheader_addr_r=0x80100000\0" \
	222	"kernelheader_addr_r=0x80200000\0" \
	223	"load_addr=0xa0000000\0" \
f7b75f8b	224	"kernel_addr_r=0x81000000\0" \
8de227ee QG	225	"fdt_addr_r=0x90000000\0" \
8de227ee QG	226	"ramdisk_addr_r=0xa0000000\0" \
dd02936f	227	"kernel_start=0x1000000\0" \
9b457cc6	228	"kernelheader_start=0x800000\0" \
dd02936f MH	229	"kernel_load=0xa0000000\0" \
dd02936f MH	230	"kernel_size=0x2800000\0" \
9b457cc6	231	"kernelheader_size=0x40000\0" \
aab2ef9a SL	232	"kernel_addr_sd=0x8000\0" \
aab2ef9a SL	233	"kernel_size_sd=0x14000\0" \
9b457cc6 VPB	234	"kernelhdr_addr_sd=0x4000\0" \
9b457cc6 VPB	235	"kernelhdr_size_sd=0x10\0" \
dd02936f	236	"console=ttyS0,115200\0" \
43ede0bc	237	CONFIG_MTDPARTS_DEFAULT "\0" \
8de227ee QG	238	BOOTENV \
8de227ee QG	239	"boot_scripts=ls1046ardb_boot.scr\0" \
f7b75f8b	240	"boot_script_hdr=hdr_ls1046ardb_bs.out\0" \
8de227ee QG	241	"scan_dev_for_boot_part=" \
	242	"part list ${devtype} ${devnum} devplist; " \
	243	"env exists devplist \|\| setenv devplist 1; " \
	244	"for distro_bootpart in ${devplist}; do " \
	245	"if fstype ${devtype} " \
	246	"${devnum}:${distro_bootpart} " \
	247	"bootfstype; then " \
	248	"run scan_dev_for_boot; " \
	249	"fi; " \
	250	"done\0" \
f7b75f8b SG	251	"scan_dev_for_boot=" \
	252	"echo Scanning ${devtype} " \
	253	"${devnum}:${distro_bootpart}...; " \
	254	"for prefix in ${boot_prefixes}; do " \
	255	"run scan_dev_for_scripts; " \
	256	"done;" \
	257	"\0" \
	258	"boot_a_script=" \
	259	"load ${devtype} ${devnum}:${distro_bootpart} " \
	260	"${scriptaddr} ${prefix}${script}; " \
	261	"env exists secureboot && load ${devtype} " \
	262	"${devnum}:${distro_bootpart} " \
	263	"${scripthdraddr} ${prefix}${boot_script_hdr} " \
	264	"&& esbc_validate ${scripthdraddr};" \
	265	"source ${scriptaddr}\0" \
8de227ee QG	266	"qspi_bootcmd=echo Trying load from qspi..;" \
8de227ee QG	267	"sf probe && sf read $load_addr " \
9b457cc6 VPB	268	"$kernel_start $kernel_size; env exists secureboot " \
	269	"&& sf read $kernelheader_addr_r $kernelheader_start " \
	270	"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
	271	"bootm $load_addr#$board\0" \
aab2ef9a SL	272	"sd_bootcmd=echo Trying load from SD ..;" \
	273	"mmcinfo; mmc read $load_addr " \
	274	"$kernel_addr_sd $kernel_size_sd && " \
9b457cc6 VPB	275	"env exists secureboot && mmc read $kernelheader_addr_r " \
	276	"$kernelhdr_addr_sd $kernelhdr_size_sd " \
	277	" && esbc_validate ${kernelheader_addr_r};" \
aab2ef9a	278	"bootm $load_addr#$board\0"
8de227ee	279
a52ff334 SG	280	#endif
a52ff334 SG	281
dd02936f MH	282	/* Monitor Command Prompt */
dd02936f MH	283	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
dd02936f	284	#define CONFIG_SYS_LONGHELP
a52ff334	285
dd02936f MH	286	#define CONFIG_AUTO_COMPLETE
	287	#define CONFIG_SYS_MAXARGS 64 /* max command args */
	288
	289	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
	290
457e51cf SG	291	#include <asm/arch/soc.h>
457e51cf SG	292
dd02936f	293	#endif /* __LS1046A_COMMON_H */