[people/ms/u-boot.git] / include / configs / lsxl.h

/*
 * Copyright (c) 2012 Michael Walle
 * Michael Walle <michael@walle.cc>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H

/*
 * Version number information
 */
#if defined(CONFIG_LSCHLV2)
#define CONFIG_IDENT_STRING " LS-CHLv2"
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#define CONFIG_MACH_TYPE 3006
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
#elif defined(CONFIG_LSXHL)
#define CONFIG_IDENT_STRING " LS-XHL"
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#define CONFIG_MACH_TYPE 2663
/* CONFIG_SYS_TCLK is 200000000 by default */
#else
#error "unknown board"
#endif

/*
 * General configuration options
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KIRKWOOD			/* SOC Family Name */
#define CONFIG_KW88F6281		/* SOC Name */

#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
#define CONFIG_MISC_INIT_R
#define CONFIG_SHOW_BOOT_PROGRESS

#define CONFIG_RANDOM_MACADDR
#define CONFIG_KIRKWOOD_GPIO
#define CONFIG_OF_LIBFDT

#define CONFIG_SYS_NO_FLASH
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_INFO_QUIET

/*
 * Enable u-boot API for standalone programs.
 */
#define CONFIG_API

/*
 * Commands configuration
 */
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IDE
#define CONFIG_CMD_PING
#define CONFIG_CMD_PING
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB

#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* ST M25P40 */
#undef CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_STMICRO
#undef CONFIG_ENV_SPI_MAX_HZ
#define CONFIG_ENV_SPI_MAX_HZ		25000000
#undef CONFIG_SF_DEFAULT_SPEED
#define CONFIG_SF_DEFAULT_SPEED		25000000


#undef CONFIG_SYS_PROMPT
#define CONFIG_SYS_PROMPT		"=> "
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "

/*
 *  Environment variables configurations
 */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	8
#define CONFIG_ENV_IS_IN_SPI_FLASH	1
#define CONFIG_ENV_SECT_SIZE		0x10000 /* 64K */
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

#define CONFIG_ENV_SIZE			0x10000 /* 64k */
#define CONFIG_ENV_OFFSET		0x70000 /* env starts here */

/*
 * Default environment variables
 */
#define CONFIG_LOADADDR		0x00800000
#define CONFIG_BOOTCOMMAND	"run bootcmd_${bootsource}"
#define CONFIG_BOOTARGS		"console=ttyS0,115200 root=/dev/sda2"
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"bootsource=hdd\0"						\
	"hdpart=0:1\0"							\
	"bootcmd_net=bootp 0x00100000 uImage "				\
		"&& tftpboot 0x00800000 uInitrd "			\
		"&& bootm 0x00100000 0x00800000\0"			\
	"bootcmd_hdd=ide reset "					\
		"&& ext2load ide ${hdpart} 0x00100000 /uImage "		\
		"&& ext2load ide ${hdpart} 0x00800000 /uInitrd "	\
		"&& bootm 0x00100000 0x00800000\0"			\
	"bootcmd_usb=usb start "					\
		"&& fatload usb 0:1 0x00100000 /uImage "		\
		"&& fatload usb 0:1 0x00800000 /uInitrd "		\
		"&& bootm 0x00100000 0x00800000\0"			\
	"bootcmd_rescue=run config_nc_dhcp; run nc\0"			\
	"eraseenv=sf probe 0 "						\
		"&& sf erase " __stringify(CONFIG_ENV_OFFSET)		\
			" +" __stringify(CONFIG_ENV_SIZE) "\0"		\
	"config_nc_dhcp=setenv autoload_old ${autoload}; "		\
		"setenv autoload no "					\
		"&& bootp "						\
		"&& setenv ncip "					\
		"&& setenv autoload ${autoload_old}; "			\
		"setenv autoload_old\0"					\
	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
		"setenv ncip; setenv gatewayip; setenv ethact; "	\
		"setenv bootfile; setenv dnsip; "			\
		"setenv bootsource hdd; run ser\0"			\
	"restore_env=run standard_env; saveenv; reset\0"		\
	"ser=setenv stdin serial; setenv stdout serial; "		\
		"setenv stderr serial\0"				\
	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0"	\
	"stdin=serial\0"						\
	"stdout=serial\0"						\
	"stderr=serial\0"

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS		{0, 1} /* enable port 1 only */
#define CONFIG_PHY_BASE_ADR		7
#undef CONFIG_RESET_PHY_R
#endif /* CONFIG_CMD_NET */

#ifdef CONFIG_CMD_IDE
#undef CONFIG_IDE_LED
#undef CONFIG_SYS_IDE_MAXBUS
#define CONFIG_SYS_IDE_MAXBUS		1
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXDEVICE	1
#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
#endif

#endif /* _CONFIG_LSXL_H */
Commit	Line	Data
f214a20e MW	1	/*
	2	* Copyright (c) 2012 Michael Walle
	3	* Michael Walle <michael@walle.cc>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
f214a20e MW	6	*/
	7
	8	#ifndef _CONFIG_LSXL_H
	9	#define _CONFIG_LSXL_H
	10
	11	/*
	12	* Version number information
	13	*/
	14	#if defined(CONFIG_LSCHLV2)
	15	#define CONFIG_IDENT_STRING " LS-CHLv2"
	16	#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
	17	#define CONFIG_MACH_TYPE 3006
	18	#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
	19	#elif defined(CONFIG_LSXHL)
	20	#define CONFIG_IDENT_STRING " LS-XHL"
	21	#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
	22	#define CONFIG_MACH_TYPE 2663
	23	/* CONFIG_SYS_TCLK is 200000000 by default */
	24	#else
	25	#error "unknown board"
	26	#endif
	27
	28	/*
	29	* General configuration options
	30	*/
	31	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
	32	#define CONFIG_KIRKWOOD /* SOC Family Name */
	33	#define CONFIG_KW88F6281 /* SOC Name */
	34
	35	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	36	#define CONFIG_MISC_INIT_R
	37	#define CONFIG_SHOW_BOOT_PROGRESS
	38
	39	#define CONFIG_RANDOM_MACADDR
	40	#define CONFIG_KIRKWOOD_GPIO
	41	#define CONFIG_OF_LIBFDT
	42
	43	#define CONFIG_SYS_NO_FLASH
	44	#define CONFIG_SYS_HUSH_PARSER
	45	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	46	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	47
	48	/*
	49	* Enable u-boot API for standalone programs.
	50	*/
	51	#define CONFIG_API
	52
	53	/*
	54	* Commands configuration
	55	*/
	56	#include <config_cmd_default.h>
	57	#define CONFIG_CMD_DHCP
	58	#define CONFIG_CMD_ELF
	59	#define CONFIG_CMD_ENV
	60	#define CONFIG_CMD_EXT2
	61	#define CONFIG_CMD_FAT
	62	#define CONFIG_CMD_IDE
	63	#define CONFIG_CMD_PING
	64	#define CONFIG_CMD_PING
	65	#define CONFIG_CMD_SF
	66	#define CONFIG_CMD_SPI
	67	#define CONFIG_CMD_USB
	68
	69	#define CONFIG_DOS_PARTITION
70	#define CONFIG_EFI_PARTITION
71
72	/*
73	* mv-common.h should be defined after CMD configs since it used them
74	* to enable certain macros
75	*/
76	#include "mv-common.h"
77
78	/* ST M25P40 */
79	#undef CONFIG_SPI_FLASH_MACRONIX
80	#define CONFIG_SPI_FLASH_STMICRO
81	#undef CONFIG_ENV_SPI_MAX_HZ
82	#define CONFIG_ENV_SPI_MAX_HZ 25000000
83	#undef CONFIG_SF_DEFAULT_SPEED
84	#define CONFIG_SF_DEFAULT_SPEED 25000000
85
86
87	#undef CONFIG_SYS_PROMPT
88	#define CONFIG_SYS_PROMPT "=> "
89	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
90
91	/*
92	* Environment variables configurations
93	*/
94	#ifdef CONFIG_SPI_FLASH
95	#define CONFIG_SYS_MAX_FLASH_BANKS 1
96	#define CONFIG_SYS_MAX_FLASH_SECT 8
97	#define CONFIG_ENV_IS_IN_SPI_FLASH 1
98	#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K */
99	#else
100	#define CONFIG_ENV_IS_NOWHERE
101	#endif
102
103	#define CONFIG_ENV_SIZE 0x10000 /* 64k */
104	#define CONFIG_ENV_OFFSET 0x70000 /* env starts here */
105
106	/*
107	* Default environment variables
108	*/
109	#define CONFIG_LOADADDR 0x00800000
110	#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
111	#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
112	#define CONFIG_EXTRA_ENV_SETTINGS \
113	"bootsource=hdd\0" \
114	"hdpart=0:1\0" \
115	"bootcmd_net=bootp 0x00100000 uImage " \
116	"&& tftpboot 0x00800000 uInitrd " \
117	"&& bootm 0x00100000 0x00800000\0" \
118	"bootcmd_hdd=ide reset " \
119	"&& ext2load ide ${hdpart} 0x00100000 /uImage " \
120	"&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \
121	"&& bootm 0x00100000 0x00800000\0" \
122	"bootcmd_usb=usb start " \
123	"&& fatload usb 0:1 0x00100000 /uImage " \
124	"&& fatload usb 0:1 0x00800000 /uInitrd " \
125	"&& bootm 0x00100000 0x00800000\0" \
126	"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
127	"eraseenv=sf probe 0 " \
5368c55d MV	128	"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
5368c55d MV	129	" +" __stringify(CONFIG_ENV_SIZE) "\0" \
f214a20e MW	130	"config_nc_dhcp=setenv autoload_old ${autoload}; " \
	131	"setenv autoload no " \
	132	"&& bootp " \
23c9946a	133	"&& setenv ncip " \
f214a20e MW	134	"&& setenv autoload ${autoload_old}; " \
	135	"setenv autoload_old\0" \
	136	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
	137	"setenv ncip; setenv gatewayip; setenv ethact; " \
	138	"setenv bootfile; setenv dnsip; " \
	139	"setenv bootsource hdd; run ser\0" \
	140	"restore_env=run standard_env; saveenv; reset\0" \
	141	"ser=setenv stdin serial; setenv stdout serial; " \
	142	"setenv stderr serial\0" \
	143	"nc=setenv stdin nc; setenv stdout nc; setenv stderr nc\0" \
	144	"stdin=serial\0" \
	145	"stdout=serial\0" \
	146	"stderr=serial\0"
	147
	148	/*
	149	* Ethernet Driver configuration
	150	*/
	151	#ifdef CONFIG_CMD_NET
	152	#define CONFIG_MVGBE_PORTS {0, 1} /* enable port 1 only */
	153	#define CONFIG_PHY_BASE_ADR 7
	154	#undef CONFIG_RESET_PHY_R
	155	#endif /* CONFIG_CMD_NET */
	156
	157	#ifdef CONFIG_CMD_IDE
	158	#undef CONFIG_IDE_LED
	159	#undef CONFIG_SYS_IDE_MAXBUS
	160	#define CONFIG_SYS_IDE_MAXBUS 1
	161	#undef CONFIG_SYS_IDE_MAXDEVICE
	162	#define CONFIG_SYS_IDE_MAXDEVICE 1
	163	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
	164	#endif
	165
	166	#endif /* _CONFIG_LSXL_H */