[people/ms/u-boot.git] / include / configs / ma5d4evk.h

/*
 * DENX MA5D4 configuration
 * Copyright (C) 2015 Marek Vasut <marex@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MA5D4EVK_CONFIG_H__
#define __MA5D4EVK_CONFIG_H__

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

#include "at91-sama5_common.h"
#undef CONFIG_BOOTARGS
#define CONFIG_SYS_USE_SERIALFLASH	1

/*
 * U-Boot Commands
 */
#define CONFIG_FAT_WRITE

/*
 * Memory configurations
 */
#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
#define CONFIG_SYS_SDRAM_SIZE		0x10000000

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_INIT_SP_ADDR		0x210000
#else
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif

/*
 * Environment
 */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET		0x8000
#define CONFIG_ENV_SIZE			0x4000
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE		0x1000

/*
 * U-Boot general configurations
 */

/*
 * Serial Driver
 */
#define CONFIG_ATMEL_USART
#define CONFIG_USART_BASE		ATMEL_BASE_USART0
#define CONFIG_USART_ID			ATMEL_ID_USART0

/*
 * Ethernet
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MACB
#define CONFIG_RMII
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_MACB_SEARCH_PHY
#define CONFIG_ARP_TIMEOUT		200UL
#define CONFIG_IP_DEFRAG
#endif

/*
 * LCD
 */
#ifdef CONFIG_LCD
#define CONFIG_BMP_16BPP
#define CONFIG_BMP_24BPP
#define CONFIG_BMP_32BPP
#define LCD_BPP				LCD_COLOR16
#define LCD_OUTPUT_BPP                  24
#define CONFIG_ATMEL_HLCD
#endif

/*
 * SD/MMC
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_GENERIC_ATMEL_MCI
#endif

/*
 * SPI NOR (boot memory)
 */
#ifdef CONFIG_CMD_SF
#define CONFIG_ATMEL_SPI
#define CONFIG_ATMEL_SPI0
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		30000000
#endif

/*
 * USB
 */
#ifdef CONFIG_CMD_USB
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3

/* USB device */
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_RNDIS
#define CONFIG_USBNET_MANUFACTURER      "DENX"
#endif

/*
 * Boot Linux
 */
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE		"fitImage"
#define CONFIG_BOOTARGS		"console=ttyS3,115200"
#define CONFIG_LOADADDR		0x20800000
#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/*
 * Extra Environments
 */
#define CONFIG_PREBOOT		"run try_bootscript"
#define CONFIG_HOSTNAME		ma5d4evk

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"consdev=ttyS3\0"						\
	"baudrate=115200\0"						\
	"bootscript=boot.scr\0"						\
	"bootdev=/dev/mmcblk1p1\0"					\
	"bootpart=1:1\0"						\
	"rootdev=/dev/mmcblk1p2\0"					\
	"netdev=eth0\0"							\
	"kernel_addr_r=0x22000000\0"					\
	"update_spi_firmware_spl_addr=0x21000000\0"			\
	"update_spi_firmware_spl_filename=boot.bin\0"			\
	"update_spi_firmware_addr=0x22000000\0"				\
	"update_spi_firmware_filename=u-boot.img\0"			\
	"update_spi_firmware="	/* Update the SPI flash firmware */	\
		"if sf probe ; then "					\
		"if tftp ${update_spi_firmware_spl_addr} "		\
			"${update_spi_firmware_spl_filename} ; then "	\
		"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
		"if tftp ${update_spi_firmware_addr} "			\
			"${update_spi_firmware_filename} ; then "	\
		"setenv update_spi_firmware_filesize ${filesize} ; "	\
		"sf update ${update_spi_firmware_spl_addr} 0x0 "	\
			"${update_spi_firmware_spl_filesize} ; "	\
		"sf update ${update_spi_firmware_addr} 0x10000 "	\
			"${update_spi_firmware_filesize} ; "		\
		"fi ; "							\
		"fi ; "							\
		"fi\0"							\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"try_bootscript="						\
		"mmc rescan;"						\
		"if test -e mmc ${bootpart} ${bootscript} ; then "	\
		"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
		"then ; "						\
			"echo Running bootscript... ; "			\
			"source ${kernel_addr_r} ; "			\
		"fi ; "							\
		"fi\0"
/* SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE		0x200000
#define CONFIG_SPL_MAX_SIZE		0x10000
#define CONFIG_SPL_BSS_START_ADDR	0x20000000
#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
#define CONFIG_SYS_SPL_MALLOC_START	0x20080000
#define CONFIG_SYS_SPL_MALLOC_SIZE	0x80000

#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SYS_MONITOR_LEN		(512 << 10)

#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x10000

#endif	/* __MA5D4EVK_CONFIG_H__ */
Commit	Line	Data
c21c28b6 MV	1	/*
	2	* DENX MA5D4 configuration
	3	* Copyright (C) 2015 Marek Vasut <marex@denx.de>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef __MA5D4EVK_CONFIG_H__
	9	#define __MA5D4EVK_CONFIG_H__
	10
c21c28b6 MV	11	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	12
	13	#include "at91-sama5_common.h"
	14	#undef CONFIG_BOOTARGS
	15	#define CONFIG_SYS_USE_SERIALFLASH 1
	16
	17	/*
	18	* U-Boot Commands
	19	*/
c21c28b6	20	#define CONFIG_FAT_WRITE
c21c28b6	21
c21c28b6 MV	22	/*
	23	* Memory configurations
	24	*/
	25	#define CONFIG_NR_DRAM_BANKS 1
	26	#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
	27	#define CONFIG_SYS_SDRAM_SIZE 0x10000000
	28
	29	#ifdef CONFIG_SPL_BUILD
	30	#define CONFIG_SYS_INIT_SP_ADDR 0x210000
	31	#else
	32	#define CONFIG_SYS_INIT_SP_ADDR \
	33	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
	34	#endif
	35
	36	/*
	37	* Environment
	38	*/
	39	#define CONFIG_ENV_IS_IN_SPI_FLASH
	40	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	41	#define CONFIG_ENV_OFFSET 0x8000
	42	#define CONFIG_ENV_SIZE 0x4000
	43	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	44	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	45	#define CONFIG_ENV_SECT_SIZE 0x1000
	46
	47	/*
	48	* U-Boot general configurations
	49	*/
c21c28b6 MV	50
	51	/*
	52	* Serial Driver
	53	*/
	54	#define CONFIG_ATMEL_USART
	55	#define CONFIG_USART_BASE ATMEL_BASE_USART0
	56	#define CONFIG_USART_ID ATMEL_ID_USART0
	57
	58	/*
	59	* Ethernet
	60	*/
	61	#ifdef CONFIG_CMD_NET
	62	#define CONFIG_MACB
	63	#define CONFIG_RMII
	64	#define CONFIG_NET_RETRY_COUNT 20
	65	#define CONFIG_MACB_SEARCH_PHY
	66	#define CONFIG_ARP_TIMEOUT 200UL
	67	#define CONFIG_IP_DEFRAG
	68	#endif
	69
	70	/*
	71	* LCD
	72	*/
	73	#ifdef CONFIG_LCD
c21c28b6 MV	74	#define CONFIG_BMP_16BPP
	75	#define CONFIG_BMP_24BPP
	76	#define CONFIG_BMP_32BPP
	77	#define LCD_BPP LCD_COLOR16
	78	#define LCD_OUTPUT_BPP 24
	79	#define CONFIG_ATMEL_HLCD
c21c28b6 MV	80	#endif
	81
	82	/*
	83	* SD/MMC
	84	*/
	85	#ifdef CONFIG_CMD_MMC
c21c28b6 MV	86	#define CONFIG_GENERIC_ATMEL_MCI
	87	#endif
	88
	89	/*
	90	* SPI NOR (boot memory)
	91	*/
	92	#ifdef CONFIG_CMD_SF
	93	#define CONFIG_ATMEL_SPI
	94	#define CONFIG_ATMEL_SPI0
	95	#define CONFIG_SPI_FLASH_ATMEL
	96	#define CONFIG_SF_DEFAULT_BUS 0
	97	#define CONFIG_SF_DEFAULT_CS 0
	98	#define CONFIG_SF_DEFAULT_SPEED 30000000
	99	#endif
	100
	101	/*
	102	* USB
	103	*/
	104	#ifdef CONFIG_CMD_USB
c21c28b6	105	#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
c21c28b6 MV	106
c21c28b6 MV	107	/* USB device */
c21c28b6 MV	108	#define CONFIG_USB_ETHER
	109	#define CONFIG_USB_ETH_RNDIS
	110	#define CONFIG_USBNET_MANUFACTURER "DENX"
	111	#endif
	112
	113	/*
	114	* Boot Linux
	115	*/
	116	#define CONFIG_CMDLINE_TAG
	117	#define CONFIG_INITRD_TAG
	118	#define CONFIG_SETUP_MEMORY_TAGS
c21c28b6 MV	119	#define CONFIG_BOOTFILE "fitImage"
	120	#define CONFIG_BOOTARGS "console=ttyS3,115200"
	121	#define CONFIG_LOADADDR 0x20800000
	122	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	123	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
c21c28b6 MV	124
	125	/*
	126	* Extra Environments
	127	*/
	128	#define CONFIG_PREBOOT "run try_bootscript"
	129	#define CONFIG_HOSTNAME ma5d4evk
	130
	131	#define CONFIG_EXTRA_ENV_SETTINGS \
	132	"consdev=ttyS3\0" \
	133	"baudrate=115200\0" \
	134	"bootscript=boot.scr\0" \
	135	"bootdev=/dev/mmcblk1p1\0" \
	136	"bootpart=1:1\0" \
	137	"rootdev=/dev/mmcblk1p2\0" \
	138	"netdev=eth0\0" \
	139	"kernel_addr_r=0x22000000\0" \
	140	"update_spi_firmware_spl_addr=0x21000000\0" \
	141	"update_spi_firmware_spl_filename=boot.bin\0" \
	142	"update_spi_firmware_addr=0x22000000\0" \
	143	"update_spi_firmware_filename=u-boot.img\0" \
	144	"update_spi_firmware=" /* Update the SPI flash firmware */ \
	145	"if sf probe ; then " \
	146	"if tftp ${update_spi_firmware_spl_addr} " \
	147	"${update_spi_firmware_spl_filename} ; then " \
	148	"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
	149	"if tftp ${update_spi_firmware_addr} " \
	150	"${update_spi_firmware_filename} ; then " \
	151	"setenv update_spi_firmware_filesize ${filesize} ; " \
	152	"sf update ${update_spi_firmware_spl_addr} 0x0 " \
	153	"${update_spi_firmware_spl_filesize} ; " \
	154	"sf update ${update_spi_firmware_addr} 0x10000 " \
	155	"${update_spi_firmware_filesize} ; " \
	156	"fi ; " \
	157	"fi ; " \
	158	"fi\0" \
	159	"addcons=" \
	160	"setenv bootargs ${bootargs} " \
	161	"console=${consdev},${baudrate}\0" \
	162	"addip=" \
	163	"setenv bootargs ${bootargs} " \
	164	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	165	"${netmask}:${hostname}:${netdev}:off\0" \
	166	"addmisc=" \
	167	"setenv bootargs ${bootargs} ${miscargs}\0" \
	168	"addargs=run addcons addmisc\0" \
	169	"mmcload=" \
	170	"mmc rescan ; " \
	171	"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
	172	"netload=" \
	173	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	174	"miscargs=nohlt panic=1\0" \
	175	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	176	"nfsargs=" \
	177	"setenv bootargs root=/dev/nfs rw " \
	178	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	179	"mmc_mmc=" \
	180	"run mmcload mmcargs addargs ; " \
	181	"bootm ${kernel_addr_r}\0" \
	182	"mmc_nfs=" \
	183	"run mmcload nfsargs addip addargs ; " \
	184	"bootm ${kernel_addr_r}\0" \
	185	"net_mmc=" \
	186	"run netload mmcargs addargs ; " \
	187	"bootm ${kernel_addr_r}\0" \
188	"net_nfs=" \
189	"run netload nfsargs addip addargs ; " \
190	"bootm ${kernel_addr_r}\0" \
191	"try_bootscript=" \
192	"mmc rescan;" \
193	"if test -e mmc ${bootpart} ${bootscript} ; then " \
194	"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
195	"then ; " \
196	"echo Running bootscript... ; " \
197	"source ${kernel_addr_r} ; " \
198	"fi ; " \
199	"fi\0"
200	/* SPL */
201	#define CONFIG_SPL_FRAMEWORK
202	#define CONFIG_SPL_TEXT_BASE 0x200000
203	#define CONFIG_SPL_MAX_SIZE 0x10000
204	#define CONFIG_SPL_BSS_START_ADDR 0x20000000
205	#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
206	#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
207	#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
208
c21c28b6 MV	209	#define CONFIG_SPL_BOARD_INIT
	210	#define CONFIG_SYS_MONITOR_LEN (512 << 10)
	211
c21c28b6 MV	212	#define CONFIG_SPL_SPI_LOAD
	213	#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
	214
	215	#endif /* __MA5D4EVK_CONFIG_H__ */