[people/ms/u-boot.git] / include / configs / mx23_olinuxino.h

/*
 * Copyright (C) 2013 Marek Vasut <marex@denx.de>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */
#ifndef __MX23_OLINUXINO_CONFIG_H__
#define __MX23_OLINUXINO_CONFIG_H__

#include <asm/arch/iomux-mx23.h>

/*
 * SoC configurations
 */
#define	CONFIG_MX23				/* i.MX23 SoC */
#define	CONFIG_MXS_GPIO				/* GPIO control */
#define	CONFIG_SYS_HZ		1000		/* Ticks per second */

#define	CONFIG_MACH_TYPE	4105

#include <asm/arch/regs-base.h>

#define	CONFIG_SYS_NO_FLASH
#define	CONFIG_BOARD_EARLY_INIT_F
#define	CONFIG_ARCH_MISC_INIT

/*
 * SPL
 */
#define	CONFIG_SPL
#define	CONFIG_SPL_NO_CPU_SUPPORT_CODE
#define	CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
#define	CONFIG_SPL_LIBCOMMON_SUPPORT
#define	CONFIG_SPL_LIBGENERIC_SUPPORT
#define	CONFIG_SPL_GPIO_SUPPORT

/*
 * U-Boot Commands
 */
#include <config_cmd_default.h>
#define	CONFIG_DISPLAY_CPUINFO
#define	CONFIG_DOS_PARTITION

#define	CONFIG_CMD_CACHE
#define	CONFIG_CMD_EXT2
#define	CONFIG_CMD_FAT
#define	CONFIG_CMD_GPIO
#define	CONFIG_CMD_LED
#define	CONFIG_CMD_MMC
#define	CONFIG_CMD_USB

/*
 * Memory configurations
 */
#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
#define	PHYS_SDRAM_1			0x40000000	/* Base address */
#define	PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
#define	CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
/* Point initial SP in SRAM so SPL can use it too. */

#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
 * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
 * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
 * binary. In case there was more of this mess, 0x100 bytes are skipped.
 */
#define	CONFIG_SYS_TEXT_BASE		0x40000100

/*
 * U-Boot general configurations
 */
#define	CONFIG_SYS_LONGHELP
#define	CONFIG_SYS_PROMPT	"=> "
#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
#define	CONFIG_SYS_PBSIZE	\
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
						/* Print buffer size */
#define	CONFIG_SYS_MAXARGS	32		/* Max number of command args */
#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
						/* Boot argument buffer size */
#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
#define	CONFIG_AUTO_COMPLETE			/* Command auto complete */
#define	CONFIG_CMDLINE_EDITING			/* Command history etc */
#define	CONFIG_SYS_HUSH_PARSER

/*
 * Serial Driver
 */
#define	CONFIG_PL011_SERIAL
#define	CONFIG_PL011_CLOCK		24000000
#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
#define	CONFIG_CONS_INDEX		0
#define	CONFIG_BAUDRATE			115200	/* Default baud rate */

/*
 * Status LED
 */
#define	CONFIG_STATUS_LED
#define	CONFIG_GPIO_LED
#define	CONFIG_BOARD_SPECIFIC_LED
#define	STATUS_LED_BOOT	0
#define	STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
#define	STATUS_LED_STATE	STATUS_LED_ON
#define	STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)

/*
 * MMC Driver
 */
#ifdef	CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
#define CONFIG_MXS_MMC
#endif

/*
 * APBH DMA
 */
#define CONFIG_APBH_DMA

/* USB */
#ifdef	CONFIG_CMD_USB
#define	CONFIG_USB_EHCI
#define	CONFIG_USB_EHCI_MXS
#define	CONFIG_EHCI_MXS_PORT0
#define	CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define	CONFIG_EHCI_IS_TDI
#define	CONFIG_USB_STORAGE
#endif

/*
 * Boot Linux
 */
#define	CONFIG_CMDLINE_TAG
#define	CONFIG_SETUP_MEMORY_TAGS
#define	CONFIG_BOOTDELAY	3
#define	CONFIG_BOOTFILE		"uImage"
#define	CONFIG_LOADADDR		0x42000000
#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
#define	CONFIG_OF_LIBFDT

/*
 * Environment
 */
#define	CONFIG_ENV_IS_IN_MMC
#define	CONFIG_ENV_OVERWRITE
#ifdef	CONFIG_ENV_IS_IN_MMC
#define	CONFIG_ENV_OFFSET	(256 * 1024)
#define	CONFIG_ENV_SIZE	(16 * 1024)
#define	CONFIG_SYS_MMC_ENV_DEV 0
#endif

/*
 * Extra Environments
 */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"update_sd_firmware_filename=u-boot.sd\0" \
	"update_sd_firmware="		/* Update the SD firmware partition */ \
		"if mmc rescan ; then "	\
		"if tftp ${update_sd_firmware_filename} ; then " \
		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
		"setexpr fw_sz ${fw_sz} + 1 ; "	\
		"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
		"fi ; "	\
		"fi\0" \
	"script=boot.scr\0"	\
	"uimage=uImage\0" \
	"console=ttyAMA0\0" \
	"fdt_file=imx23-olinuxino.dtb\0" \
	"fdt_addr=0x41000000\0" \
	"boot_fdt=try\0" \
	"mmcdev=0\0" \
	"mmcpart=2\0" \
	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript="  \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; "	\
		"source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else " \
				"echo ERR: Fail to boot from MMC; " \
			"fi; " \
		"fi; " \
	"else exit; fi"

#endif /* __MX23_OLINUXINO_CONFIG_H__ */
Commit	Line	Data
64a93860 MV	1	/*
	2	* Copyright (C) 2013 Marek Vasut <marex@denx.de>
	3	*
	4	* This program is free software; you can redistribute it and/or
	5	* modify it under the terms of the GNU General Public License as
	6	* published by the Free Software Foundation; either version 2 of
	7	* the License, or (at your option) any later version.
	8	*
	9	* This program is distributed in the hope that it will be useful,
	10	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	11	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	12	* GNU General Public License for more details.
	13	*
	14	* You should have received a copy of the GNU General Public License
	15	* along with this program; if not, write to the Free Software
	16	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	17	* MA 02111-1307 USA
	18	*/
	19	#ifndef __MX23_OLINUXINO_CONFIG_H__
	20	#define __MX23_OLINUXINO_CONFIG_H__
	21
36c7c925 OS	22	#include <asm/arch/iomux-mx23.h>
36c7c925 OS	23
64a93860 MV	24	/*
	25	* SoC configurations
	26	*/
	27	#define CONFIG_MX23 /* i.MX23 SoC */
	28	#define CONFIG_MXS_GPIO /* GPIO control */
	29	#define CONFIG_SYS_HZ 1000 /* Ticks per second */
	30
	31	#define CONFIG_MACH_TYPE 4105
	32
	33	#include <asm/arch/regs-base.h>
	34
	35	#define CONFIG_SYS_NO_FLASH
	36	#define CONFIG_BOARD_EARLY_INIT_F
	37	#define CONFIG_ARCH_MISC_INIT
	38
	39	/*
	40	* SPL
	41	*/
	42	#define CONFIG_SPL
	43	#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
	44	#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mxs"
	45	#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
	46	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	47	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	48	#define CONFIG_SPL_GPIO_SUPPORT
	49
	50	/*
	51	* U-Boot Commands
	52	*/
	53	#include <config_cmd_default.h>
	54	#define CONFIG_DISPLAY_CPUINFO
	55	#define CONFIG_DOS_PARTITION
	56
	57	#define CONFIG_CMD_CACHE
13b1ebde	58	#define CONFIG_CMD_EXT2
64a93860 MV	59	#define CONFIG_CMD_FAT
64a93860 MV	60	#define CONFIG_CMD_GPIO
36c7c925	61	#define CONFIG_CMD_LED
13b1ebde	62	#define CONFIG_CMD_MMC
ebe1d170	63	#define CONFIG_CMD_USB
64a93860 MV	64
	65	/*
	66	* Memory configurations
	67	*/
	68	#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
	69	#define PHYS_SDRAM_1 0x40000000 /* Base address */
	70	#define PHYS_SDRAM_1_SIZE 0x08000000 /* Max 128 MB RAM */
	71	#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
	72	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
	73	#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
	74	#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
	75	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	76	/* Point initial SP in SRAM so SPL can use it too. */
	77
	78	#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000
	79	#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
	80
	81	#define CONFIG_SYS_INIT_SP_OFFSET \
	82	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	83	#define CONFIG_SYS_INIT_SP_ADDR \
	84	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	85	/*
	86	* We need to sacrifice first 4 bytes of RAM here to avoid triggering some
	87	* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
	88	* binary. In case there was more of this mess, 0x100 bytes are skipped.
	89	*/
	90	#define CONFIG_SYS_TEXT_BASE 0x40000100
	91
	92	/*
	93	* U-Boot general configurations
	94	*/
	95	#define CONFIG_SYS_LONGHELP
	96	#define CONFIG_SYS_PROMPT "=> "
	97	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	98	#define CONFIG_SYS_PBSIZE \
	99	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	100	/* Print buffer size */
	101	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	102	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	103	/* Boot argument buffer size */
	104	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	105	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	106	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	107	#define CONFIG_SYS_HUSH_PARSER
	108
	109	/*
	110	* Serial Driver
	111	*/
	112	#define CONFIG_PL011_SERIAL
	113	#define CONFIG_PL011_CLOCK 24000000
	114	#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
	115	#define CONFIG_CONS_INDEX 0
	116	#define CONFIG_BAUDRATE 115200 /* Default baud rate */
	117
36c7c925 OS	118	/*
	119	* Status LED
	120	*/
	121	#define CONFIG_STATUS_LED
	122	#define CONFIG_GPIO_LED
	123	#define CONFIG_BOARD_SPECIFIC_LED
	124	#define STATUS_LED_BOOT 0
	125	#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1
	126	#define STATUS_LED_STATE STATUS_LED_ON
	127	#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
	128
13b1ebde MV	129	/*
	130	* MMC Driver
	131	*/
	132	#ifdef CONFIG_CMD_MMC
	133	#define CONFIG_MMC
	134	#define CONFIG_BOUNCE_BUFFER
	135	#define CONFIG_GENERIC_MMC
	136	#define CONFIG_MXS_MMC
	137	#endif
	138
64a93860 MV	139	/*
	140	* APBH DMA
	141	*/
	142	#define CONFIG_APBH_DMA
	143
ebe1d170 OS	144	/* USB */
	145	#ifdef CONFIG_CMD_USB
	146	#define CONFIG_USB_EHCI
	147	#define CONFIG_USB_EHCI_MXS
	148	#define CONFIG_EHCI_MXS_PORT0
	149	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
	150	#define CONFIG_EHCI_IS_TDI
	151	#define CONFIG_USB_STORAGE
	152	#endif
	153
64a93860 MV	154	/*
	155	* Boot Linux
	156	*/
	157	#define CONFIG_CMDLINE_TAG
	158	#define CONFIG_SETUP_MEMORY_TAGS
	159	#define CONFIG_BOOTDELAY 3
	160	#define CONFIG_BOOTFILE "uImage"
64a93860 MV	161	#define CONFIG_LOADADDR 0x42000000
	162	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	163	#define CONFIG_OF_LIBFDT
	164
38fc15d8 OS	165	/*
	166	* Environment
	167	*/
	168	#define CONFIG_ENV_IS_IN_MMC
	169	#define CONFIG_ENV_OVERWRITE
	170	#ifdef CONFIG_ENV_IS_IN_MMC
	171	#define CONFIG_ENV_OFFSET (256 * 1024)
	172	#define CONFIG_ENV_SIZE (16 * 1024)
	173	#define CONFIG_SYS_MMC_ENV_DEV 0
	174	#endif
	175
	176	/*
	177	* Extra Environments
	178	*/
	179	#define CONFIG_EXTRA_ENV_SETTINGS \
	180	"update_sd_firmware_filename=u-boot.sd\0" \
	181	"update_sd_firmware=" /* Update the SD firmware partition */ \
	182	"if mmc rescan ; then " \
	183	"if tftp ${update_sd_firmware_filename} ; then " \
	184	"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
	185	"setexpr fw_sz ${fw_sz} + 1 ; " \
	186	"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
	187	"fi ; " \
	188	"fi\0" \
	189	"script=boot.scr\0" \
	190	"uimage=uImage\0" \
	191	"console=ttyAMA0\0" \
	192	"fdt_file=imx23-olinuxino.dtb\0" \
	193	"fdt_addr=0x41000000\0" \
	194	"boot_fdt=try\0" \
	195	"mmcdev=0\0" \
	196	"mmcpart=2\0" \
	197	"mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
	198	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	199	"root=${mmcroot}\0" \
	200	"loadbootscript=" \
	201	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	202	"bootscript=echo Running bootscript from mmc ...; " \
	203	"source\0" \
	204	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	205	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	206	"mmcboot=echo Booting from mmc ...; " \
	207	"run mmcargs; " \
	208	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	209	"if run loadfdt; then " \
	210	"bootm ${loadaddr} - ${fdt_addr}; " \
	211	"else " \
	212	"if test ${boot_fdt} = try; then " \
	213	"bootm; " \
	214	"else " \
	215	"echo WARN: Cannot load the DT; " \
	216	"fi; " \
	217	"fi; " \
	218	"else " \
	219	"bootm; " \
	220	"fi;\0"
	221
	222	#define CONFIG_BOOTCOMMAND \
	223	"mmc dev ${mmcdev}; if mmc rescan; then " \
	224	"if run loadbootscript; then " \
	225	"run bootscript; " \
	226	"else " \
	227	"if run loaduimage; then " \
	228	"run mmcboot; " \
229	"else " \
230	"echo ERR: Fail to boot from MMC; " \
231	"fi; " \
232	"fi; " \
233	"else exit; fi"
234
64a93860	235	#endif /* __MX23_OLINUXINO_CONFIG_H__ */