[people/ms/u-boot.git] / include / configs / mx6sabre_common.h

/*
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MX6QSABRE_COMMON_CONFIG_H
#define __MX6QSABRE_COMMON_CONFIG_H

#define CONFIG_MX6

#include "mx6_common.h"
#include <asm/sizes.h>

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO

#define CONFIG_MXC_UART

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1

#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		(0 | (IMX_GPIO_NR(4, 9) << 8))
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX              1
#define CONFIG_BAUDRATE                        115200

/* Command definition */
#include <config_cmd_default.h>

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_SETEXPR
#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY               1

#define CONFIG_LOADADDR                        0x12000000
#define CONFIG_SYS_TEXT_BASE           0x17800000

#ifdef CONFIG_SUPPORT_EMMC_BOOT
#define EMMC_ENV \
	"emmcdev=2\0" \
	"update_emmc_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
			"if mmc dev ${emmcdev} && " \
				"mmc open ${emmcdev} 1; then "	\
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
				"mmc close ${emmcdev} 1; " \
			"fi; "	\
		"fi\0"
#else
#define EMMC_ENV ""
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	EMMC_ENV	  \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_ARP_TIMEOUT     200UL

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE              256

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS             16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#endif

#define CONFIG_OF_LIBFDT

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
Commit	Line	Data
bcfc7118 FE	1	/*
	2	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
bcfc7118 FE	7	*/
	8
	9	#ifndef __MX6QSABRE_COMMON_CONFIG_H
	10	#define __MX6QSABRE_COMMON_CONFIG_H
	11
5ea6d7c8	12	#define CONFIG_MX6
8f393776 SW	13
8f393776 SW	14	#include "mx6_common.h"
58cc9787	15	#include <asm/sizes.h>
8f393776	16
bcfc7118 FE	17	#define CONFIG_DISPLAY_CPUINFO
	18	#define CONFIG_DISPLAY_BOARDINFO
	19
	20	#include <asm/arch/imx-regs.h>
8bfa9c69	21	#include <asm/imx-common/gpio.h>
bcfc7118 FE	22
	23	#define CONFIG_CMDLINE_TAG
	24	#define CONFIG_SETUP_MEMORY_TAGS
	25	#define CONFIG_INITRD_TAG
	26	#define CONFIG_REVISION_TAG
	27
	28	/* Size of malloc() pool */
58cc9787	29	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
bcfc7118 FE	30
bcfc7118 FE	31	#define CONFIG_BOARD_EARLY_INIT_F
85449dbd	32	#define CONFIG_BOARD_LATE_INIT
bcfc7118 FE	33	#define CONFIG_MXC_GPIO
	34
	35	#define CONFIG_MXC_UART
	36
5dc64ab7 FE	37	#define CONFIG_CMD_FUSE
	38	#ifdef CONFIG_CMD_FUSE
	39	#define CONFIG_MXC_OCOTP
	40	#endif
	41
bcfc7118 FE	42	/* MMC Configs */
	43	#define CONFIG_FSL_ESDHC
	44	#define CONFIG_FSL_USDHC
	45	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
bcfc7118 FE	46
	47	#define CONFIG_MMC
	48	#define CONFIG_CMD_MMC
	49	#define CONFIG_GENERIC_MMC
640fb607	50	#define CONFIG_BOUNCE_BUFFER
bcfc7118 FE	51	#define CONFIG_CMD_EXT2
	52	#define CONFIG_CMD_FAT
	53	#define CONFIG_DOS_PARTITION
	54
	55	#define CONFIG_CMD_PING
	56	#define CONFIG_CMD_DHCP
	57	#define CONFIG_CMD_MII
	58	#define CONFIG_CMD_NET
	59	#define CONFIG_FEC_MXC
	60	#define CONFIG_MII
	61	#define IMX_FEC_BASE ENET_BASE_ADDR
	62	#define CONFIG_FEC_XCV_TYPE RGMII
	63	#define CONFIG_ETHPRIME "FEC"
	64	#define CONFIG_FEC_MXC_PHYADDR 1
	65
	66	#define CONFIG_PHYLIB
	67	#define CONFIG_PHY_ATHEROS
	68
8bfa9c69 FE	69	#define CONFIG_CMD_SF
	70	#ifdef CONFIG_CMD_SF
	71	#define CONFIG_SPI_FLASH
	72	#define CONFIG_SPI_FLASH_STMICRO
	73	#define CONFIG_MXC_SPI
	74	#define CONFIG_SF_DEFAULT_BUS 0
	75	#define CONFIG_SF_DEFAULT_CS (0 \| (IMX_GPIO_NR(4, 9) << 8))
	76	#define CONFIG_SF_DEFAULT_SPEED 20000000
	77	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	78	#endif
	79
bcfc7118 FE	80	/* allow to overwrite serial and ethaddr */
	81	#define CONFIG_ENV_OVERWRITE
	82	#define CONFIG_CONS_INDEX 1
	83	#define CONFIG_BAUDRATE 115200
	84
	85	/* Command definition */
	86	#include <config_cmd_default.h>
	87
85449dbd	88	#define CONFIG_CMD_BMODE
ea215cdf	89	#define CONFIG_CMD_BOOTZ
810d6df0	90	#define CONFIG_CMD_SETEXPR
bcfc7118 FE	91	#undef CONFIG_CMD_IMLS
bcfc7118 FE	92
072f26b1	93	#define CONFIG_BOOTDELAY 1
bcfc7118	94
2f994fe6	95	#define CONFIG_LOADADDR 0x12000000
bcfc7118 FE	96	#define CONFIG_SYS_TEXT_BASE 0x17800000
bcfc7118 FE	97
03ce3302 OS	98	#ifdef CONFIG_SUPPORT_EMMC_BOOT
	99	#define EMMC_ENV \
	100	"emmcdev=2\0" \
	101	"update_emmc_firmware=" \
	102	"if test ${ip_dyn} = yes; then " \
	103	"setenv get_cmd dhcp; " \
	104	"else " \
	105	"setenv get_cmd tftp; " \
	106	"fi; " \
	107	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	108	"if mmc dev ${emmcdev} && " \
	109	"mmc open ${emmcdev} 1; then " \
	110	"setexpr fw_sz ${filesize} / 0x200; " \
	111	"setexpr fw_sz ${fw_sz} + 1; " \
	112	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	113	"mmc close ${emmcdev} 1; " \
	114	"fi; " \
	115	"fi\0"
	116	#else
	117	#define EMMC_ENV ""
	118	#endif
	119
bcfc7118 FE	120	#define CONFIG_EXTRA_ENV_SETTINGS \
	121	"script=boot.scr\0" \
	122	"uimage=uImage\0" \
bf0c2245	123	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
6584a1b5	124	"fdt_addr=0x18000000\0" \
bf0c2245 OS	125	"boot_fdt=try\0" \
bf0c2245 OS	126	"ip_dyn=yes\0" \
51535d9f	127	"console=" CONFIG_CONSOLE_DEV "\0" \
bcfc7118 FE	128	"fdt_high=0xffffffff\0" \
bcfc7118 FE	129	"initrd_high=0xffffffff\0" \
acbb4457	130	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
7fb72c79	131	"mmcpart=1\0" \
903e779c	132	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
810d6df0 OS	133	"update_sd_firmware=" \
	134	"if test ${ip_dyn} = yes; then " \
	135	"setenv get_cmd dhcp; " \
	136	"else " \
	137	"setenv get_cmd tftp; " \
	138	"fi; " \
	139	"if mmc dev ${mmcdev}; then " \
	140	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	141	"setexpr fw_sz ${filesize} / 0x200; " \
	142	"setexpr fw_sz ${fw_sz} + 1; " \
	143	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	144	"fi; " \
	145	"fi\0" \
03ce3302	146	EMMC_ENV \
bcfc7118 FE	147	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	148	"root=${mmcroot}\0" \
	149	"loadbootscript=" \
	150	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	151	"bootscript=echo Running bootscript from mmc ...; " \
	152	"source\0" \
	153	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
bf0c2245 OS	154	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
bf0c2245 OS	155	"mmcboot=echo Booting from mmc ...; " \
bcfc7118	156	"run mmcargs; " \
bf0c2245 OS	157	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	158	"if run loadfdt; then " \
	159	"bootm ${loadaddr} - ${fdt_addr}; " \
	160	"else " \
	161	"if test ${boot_fdt} = try; then " \
	162	"bootm; " \
	163	"else " \
	164	"echo WARN: Cannot load the DT; " \
	165	"fi; " \
	166	"fi; " \
	167	"else " \
	168	"bootm; " \
	169	"fi;\0" \
bcfc7118 FE	170	"netargs=setenv bootargs console=${console},${baudrate} " \
	171	"root=/dev/nfs " \
	172	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	173	"netboot=echo Booting from net ...; " \
	174	"run netargs; " \
bf0c2245 OS	175	"if test ${ip_dyn} = yes; then " \
	176	"setenv get_cmd dhcp; " \
	177	"else " \
	178	"setenv get_cmd tftp; " \
	179	"fi; " \
	180	"${get_cmd} ${uimage}; " \
	181	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	182	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	183	"bootm ${loadaddr} - ${fdt_addr}; " \
	184	"else " \
	185	"if test ${boot_fdt} = try; then " \
	186	"bootm; " \
	187	"else " \
	188	"echo WARN: Cannot load the DT; " \
	189	"fi; " \
	190	"fi; " \
	191	"else " \
	192	"bootm; " \
	193	"fi;\0"
bcfc7118 FE	194
	195	#define CONFIG_BOOTCOMMAND \
	196	"mmc dev ${mmcdev};" \
66300ac2	197	"if mmc rescan; then " \
bcfc7118 FE	198	"if run loadbootscript; then " \
	199	"run bootscript; " \
	200	"else " \
	201	"if run loaduimage; then " \
	202	"run mmcboot; " \
	203	"else run netboot; " \
	204	"fi; " \
	205	"fi; " \
	206	"else run netboot; fi"
	207
	208	#define CONFIG_ARP_TIMEOUT 200UL
	209
	210	/* Miscellaneous configurable options */
	211	#define CONFIG_SYS_LONGHELP
	212	#define CONFIG_SYS_HUSH_PARSER
	213	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
bcfc7118 FE	214	#define CONFIG_AUTO_COMPLETE
	215	#define CONFIG_SYS_CBSIZE 256
	216
	217	/* Print Buffer Size */
	218	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	219	#define CONFIG_SYS_MAXARGS 16
	220	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	221
	222	#define CONFIG_SYS_MEMTEST_START 0x10000000
	223	#define CONFIG_SYS_MEMTEST_END 0x10010000
bec0160e	224	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
bcfc7118 FE	225
bcfc7118 FE	226	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
bcfc7118 FE	227
	228	#define CONFIG_CMDLINE_EDITING
	229	#define CONFIG_STACKSIZE (128 * 1024)
	230
	231	/* Physical Memory Map */
	232	#define CONFIG_NR_DRAM_BANKS 1
	233	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	234
	235	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	236	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	237	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	238
	239	#define CONFIG_SYS_INIT_SP_OFFSET \
	240	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	241	#define CONFIG_SYS_INIT_SP_ADDR \
	242	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	243
	244	/* FLASH and environment organization */
	245	#define CONFIG_SYS_NO_FLASH
	246
	247	#define CONFIG_ENV_SIZE (8 * 1024)
	248
	249	#define CONFIG_ENV_IS_IN_MMC
	250
	251	#if defined(CONFIG_ENV_IS_IN_MMC)
	252	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
bcfc7118 FE	253	#endif
	254
	255	#define CONFIG_OF_LIBFDT
	256
bcfc7118 FE	257	#ifndef CONFIG_SYS_DCACHE_OFF
	258	#define CONFIG_CMD_CACHE
	259	#endif
	260
	261	#endif /* __MX6QSABRE_COMMON_CONFIG_H */