[people/ms/u-boot.git] / include / configs / mx6sabre_common.h

/*
 * Copyright (C) 2012 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Freescale i.MX6Q SabreSD board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __MX6QSABRE_COMMON_CONFIG_H
#define __MX6QSABRE_COMMON_CONFIG_H

#include "mx6_common.h"

#define CONFIG_IMX6_THERMAL

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

#define CONFIG_MXC_UART

#define CONFIG_CMD_FUSE
#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
#define CONFIG_MXC_OCOTP
#endif

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		1

#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		0
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
#endif

/* Command definition */
#define CONFIG_CMD_BMODE

#ifdef CONFIG_SUPPORT_EMMC_BOOT
#define EMMC_ENV \
	"emmcdev=2\0" \
	"update_emmc_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
			"if mmc dev ${emmcdev} 1; then "	\
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0"
#else
#define EMMC_ENV ""
#endif

#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	EMMC_ENV	  \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

#define CONFIG_ARP_TIMEOUT     200UL

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END         0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_STACKSIZE               (128 * 1024)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#define CONFIG_ENV_IS_IN_MMC

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(8 * 64 * 1024)
#endif

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#ifndef CONFIG_SPL
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED

#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_VBUS_DRAW	2

#define CONFIG_G_DNL_VENDOR_NUM		0x0525
#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
#define CONFIG_G_DNL_MANUFACTURER	"FSL"
#endif

#endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
Commit	Line	Data
bcfc7118 FE	1	/*
	2	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Freescale i.MX6Q SabreSD board.
	5	*
1a459660	6	* SPDX-License-Identifier: GPL-2.0+
bcfc7118 FE	7	*/
	8
	9	#ifndef __MX6QSABRE_COMMON_CONFIG_H
	10	#define __MX6QSABRE_COMMON_CONFIG_H
	11
8f393776 SW	12	#include "mx6_common.h"
8f393776 SW	13
6c920ee9 YL	14	#define CONFIG_IMX6_THERMAL
6c920ee9 YL	15
bcfc7118	16	/* Size of malloc() pool */
58cc9787	17	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
bcfc7118 FE	18
bcfc7118 FE	19	#define CONFIG_BOARD_EARLY_INIT_F
85449dbd	20	#define CONFIG_BOARD_LATE_INIT
bcfc7118 FE	21
	22	#define CONFIG_MXC_UART
	23
5dc64ab7	24	#define CONFIG_CMD_FUSE
6c920ee9	25	#if defined(CONFIG_CMD_FUSE) \|\| defined(CONFIG_IMX6_THERMAL)
5dc64ab7 FE	26	#define CONFIG_MXC_OCOTP
	27	#endif
	28
bcfc7118	29	/* MMC Configs */
bcfc7118	30	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
bcfc7118	31
bcfc7118 FE	32	#define CONFIG_CMD_PING
	33	#define CONFIG_CMD_DHCP
	34	#define CONFIG_CMD_MII
bcfc7118 FE	35	#define CONFIG_FEC_MXC
	36	#define CONFIG_MII
	37	#define IMX_FEC_BASE ENET_BASE_ADDR
	38	#define CONFIG_FEC_XCV_TYPE RGMII
	39	#define CONFIG_ETHPRIME "FEC"
	40	#define CONFIG_FEC_MXC_PHYADDR 1
	41
	42	#define CONFIG_PHYLIB
	43	#define CONFIG_PHY_ATHEROS
	44
8bfa9c69 FE	45	#define CONFIG_CMD_SF
8bfa9c69 FE	46	#ifdef CONFIG_CMD_SF
8bfa9c69 FE	47	#define CONFIG_SPI_FLASH_STMICRO
	48	#define CONFIG_MXC_SPI
	49	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	50	#define CONFIG_SF_DEFAULT_CS 0
8bfa9c69 FE	51	#define CONFIG_SF_DEFAULT_SPEED 20000000
	52	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	53	#endif
	54
bcfc7118	55	/* Command definition */
85449dbd	56	#define CONFIG_CMD_BMODE
bcfc7118	57
03ce3302 OS	58	#ifdef CONFIG_SUPPORT_EMMC_BOOT
	59	#define EMMC_ENV \
	60	"emmcdev=2\0" \
	61	"update_emmc_firmware=" \
	62	"if test ${ip_dyn} = yes; then " \
	63	"setenv get_cmd dhcp; " \
	64	"else " \
	65	"setenv get_cmd tftp; " \
	66	"fi; " \
	67	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
4bf83961	68	"if mmc dev ${emmcdev} 1; then " \
03ce3302 OS	69	"setexpr fw_sz ${filesize} / 0x200; " \
	70	"setexpr fw_sz ${fw_sz} + 1; " \
	71	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
03ce3302 OS	72	"fi; " \
	73	"fi\0"
	74	#else
	75	#define EMMC_ENV ""
	76	#endif
	77
bcfc7118 FE	78	#define CONFIG_EXTRA_ENV_SETTINGS \
bcfc7118 FE	79	"script=boot.scr\0" \
f2e4288a	80	"image=zImage\0" \
bf0c2245	81	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
6584a1b5	82	"fdt_addr=0x18000000\0" \
bf0c2245 OS	83	"boot_fdt=try\0" \
bf0c2245 OS	84	"ip_dyn=yes\0" \
51535d9f	85	"console=" CONFIG_CONSOLE_DEV "\0" \
bcfc7118 FE	86	"fdt_high=0xffffffff\0" \
bcfc7118 FE	87	"initrd_high=0xffffffff\0" \
acbb4457	88	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
7fb72c79	89	"mmcpart=1\0" \
903e779c	90	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
810d6df0 OS	91	"update_sd_firmware=" \
	92	"if test ${ip_dyn} = yes; then " \
	93	"setenv get_cmd dhcp; " \
	94	"else " \
	95	"setenv get_cmd tftp; " \
	96	"fi; " \
	97	"if mmc dev ${mmcdev}; then " \
	98	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	99	"setexpr fw_sz ${filesize} / 0x200; " \
	100	"setexpr fw_sz ${fw_sz} + 1; " \
	101	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	102	"fi; " \
	103	"fi\0" \
03ce3302	104	EMMC_ENV \
bcfc7118 FE	105	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	106	"root=${mmcroot}\0" \
	107	"loadbootscript=" \
	108	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	109	"bootscript=echo Running bootscript from mmc ...; " \
	110	"source\0" \
f2e4288a	111	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
bf0c2245 OS	112	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
bf0c2245 OS	113	"mmcboot=echo Booting from mmc ...; " \
bcfc7118	114	"run mmcargs; " \
bf0c2245 OS	115	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
bf0c2245 OS	116	"if run loadfdt; then " \
f2e4288a	117	"bootz ${loadaddr} - ${fdt_addr}; " \
bf0c2245 OS	118	"else " \
bf0c2245 OS	119	"if test ${boot_fdt} = try; then " \
f2e4288a	120	"bootz; " \
bf0c2245 OS	121	"else " \
	122	"echo WARN: Cannot load the DT; " \
	123	"fi; " \
	124	"fi; " \
	125	"else " \
f2e4288a	126	"bootz; " \
bf0c2245	127	"fi;\0" \
bcfc7118 FE	128	"netargs=setenv bootargs console=${console},${baudrate} " \
	129	"root=/dev/nfs " \
	130	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	131	"netboot=echo Booting from net ...; " \
	132	"run netargs; " \
bf0c2245 OS	133	"if test ${ip_dyn} = yes; then " \
	134	"setenv get_cmd dhcp; " \
	135	"else " \
	136	"setenv get_cmd tftp; " \
	137	"fi; " \
f2e4288a	138	"${get_cmd} ${image}; " \
bf0c2245 OS	139	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
bf0c2245 OS	140	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
f2e4288a	141	"bootz ${loadaddr} - ${fdt_addr}; " \
bf0c2245 OS	142	"else " \
bf0c2245 OS	143	"if test ${boot_fdt} = try; then " \
f2e4288a	144	"bootz; " \
bf0c2245 OS	145	"else " \
	146	"echo WARN: Cannot load the DT; " \
	147	"fi; " \
	148	"fi; " \
	149	"else " \
f2e4288a	150	"bootz; " \
bf0c2245	151	"fi;\0"
bcfc7118 FE	152
	153	#define CONFIG_BOOTCOMMAND \
	154	"mmc dev ${mmcdev};" \
66300ac2	155	"if mmc rescan; then " \
bcfc7118 FE	156	"if run loadbootscript; then " \
	157	"run bootscript; " \
	158	"else " \
f2e4288a	159	"if run loadimage; then " \
bcfc7118 FE	160	"run mmcboot; " \
	161	"else run netboot; " \
	162	"fi; " \
	163	"fi; " \
	164	"else run netboot; fi"
	165
	166	#define CONFIG_ARP_TIMEOUT 200UL
	167
bcfc7118 FE	168	#define CONFIG_SYS_MEMTEST_START 0x10000000
bcfc7118 FE	169	#define CONFIG_SYS_MEMTEST_END 0x10010000
bec0160e	170	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
bcfc7118	171
bcfc7118 FE	172	#define CONFIG_STACKSIZE (128 * 1024)
	173
	174	/* Physical Memory Map */
	175	#define CONFIG_NR_DRAM_BANKS 1
	176	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	177
	178	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	179	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	180	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	181
	182	#define CONFIG_SYS_INIT_SP_OFFSET \
	183	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	184	#define CONFIG_SYS_INIT_SP_ADDR \
	185	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	186
056845c2	187	/* Environment organization */
bcfc7118 FE	188	#define CONFIG_ENV_SIZE (8 * 1024)
	189
	190	#define CONFIG_ENV_IS_IN_MMC
	191
	192	#if defined(CONFIG_ENV_IS_IN_MMC)
610efbe0	193	#define CONFIG_ENV_OFFSET (8 * 64 * 1024)
bcfc7118 FE	194	#endif
bcfc7118 FE	195
04451ba3 FE	196	/* Framebuffer */
	197	#define CONFIG_VIDEO
	198	#define CONFIG_VIDEO_IPUV3
	199	#define CONFIG_CFB_CONSOLE
	200	#define CONFIG_VGA_AS_SINGLE_DEVICE
	201	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	202	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	203	#define CONFIG_VIDEO_BMP_RLE8
	204	#define CONFIG_SPLASH_SCREEN
	205	#define CONFIG_SPLASH_SCREEN_ALIGN
	206	#define CONFIG_BMP_16BPP
	207	#define CONFIG_VIDEO_LOGO
	208	#define CONFIG_VIDEO_BMP_LOGO
	209	#define CONFIG_IPUV3_CLK 260000000
	210	#define CONFIG_IMX_HDMI
	211	#define CONFIG_IMX_VIDEO_SKIP
	212
d5eb6dcf	213	#ifndef CONFIG_SPL
ad8aae82 FE	214	#define CONFIG_CI_UDC
	215	#define CONFIG_USBD_HS
	216	#define CONFIG_USB_GADGET_DUALSPEED
	217
	218	#define CONFIG_USB_GADGET
	219	#define CONFIG_CMD_USB_MASS_STORAGE
	220	#define CONFIG_USB_GADGET_MASS_STORAGE
	221	#define CONFIG_USBDOWNLOAD_GADGET
	222	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	223
	224	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	225	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	226	#define CONFIG_G_DNL_MANUFACTURER "FSL"
d5eb6dcf	227	#endif
ad8aae82	228
bcfc7118	229	#endif /* __MX6QSABRE_COMMON_CONFIG_H */