[people/ms/u-boot.git] / include / configs / nitrogen6x.h

/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Boundary Devices Nitrogen6X
 * and Freescale i.MX6Q Sabre Lite boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MACH_TYPE	3769

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
#define CONFIG_MV_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	       1
#define CONFIG_BAUDRATE			       115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY	       1

#define CONFIG_PREBOOT                 ""

#define CONFIG_LOADADDR			       0x12000000
#define CONFIG_SYS_TEXT_BASE	       0x17800000

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x11000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loaduimage; then " \
				   "run mmcboot; " \
			   "else run netboot; " \
			   "fi; " \
		   "fi; " \
	   "else run netboot; fi"
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
	"console=ttymxc1\0" \
	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
		"sf erase 0xc0000 0x2000 && " \
		"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
		"; do " \
			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
				"for fs in fat ext2 ; do " \
					"${fs}load " \
						"${dtype} ${disk}:1 " \
						"10008000 " \
						"/6x_bootscript" \
						"&& source 10008000 ; " \
				"done ; " \
			"done ; " \
		"done; " \
		"setenv stdout serial,vga ; " \
		"echo ; echo 6x_bootscript not found ; " \
		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
		"echo details at http://boundarydevices.com/6q_bootscript ; " \
		"setenv stdout serial\0" \
	"upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
		"; do " \
		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
		     "for fs in fat ext2 ; do " \
				"${fs}load ${dtype} ${disk}:1 10008000 " \
					"/6x_upgrade " \
					"&& source 10008000 ; " \
			"done ; " \
		"done ; " \
	"done\0" \

#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	       "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	       1024

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	       16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_SABRELITE)
#define CONFIG_ENV_IS_IN_MMC
#else
#define CONFIG_ENV_IS_IN_SPI_FLASH
#endif

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#define CONFIG_CMD_BMP

#define CONFIG_CMD_TIME
#define CONFIG_SYS_ALT_MEMTEST

#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_CMD_FS_GENERIC

#endif	       /* __CONFIG_H */
Commit	Line	Data
d67b0d97 EN	1	/*
	2	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Boundary Devices Nitrogen6X
	5	* and Freescale i.MX6Q Sabre Lite boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d67b0d97 EN	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
	13	#define CONFIG_MX6
	14	#define CONFIG_DISPLAY_CPUINFO
	15	#define CONFIG_DISPLAY_BOARDINFO
	16
	17	#define CONFIG_MACH_TYPE 3769
	18
	19	#include <asm/arch/imx-regs.h>
	20	#include <asm/imx-common/gpio.h>
	21
	22	#define CONFIG_CMDLINE_TAG
	23	#define CONFIG_SETUP_MEMORY_TAGS
	24	#define CONFIG_INITRD_TAG
	25	#define CONFIG_REVISION_TAG
	26
	27	/* Size of malloc() pool */
	28	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	29
	30	#define CONFIG_BOARD_EARLY_INIT_F
	31	#define CONFIG_MISC_INIT_R
	32	#define CONFIG_MXC_GPIO
f3d7cff5 TK	33	#define CONFIG_MV_UDC
	34	#define CONFIG_USBD_HS
	35	#define CONFIG_USB_GADGET_DUALSPEED
	36	#define CONFIG_USB_ETHER
	37	#define CONFIG_USB_ETH_CDC
	38	#define CONFIG_NETCONSOLE
d67b0d97	39
70a5ef21 BT	40	#define CONFIG_CMD_FUSE
	41	#ifdef CONFIG_CMD_FUSE
	42	#define CONFIG_MXC_OCOTP
	43	#endif
	44
d67b0d97 EN	45	#define CONFIG_MXC_UART
	46	#define CONFIG_MXC_UART_BASE UART2_BASE
	47
	48	#define CONFIG_CMD_SF
	49	#ifdef CONFIG_CMD_SF
	50	#define CONFIG_SPI_FLASH
	51	#define CONFIG_SPI_FLASH_SST
	52	#define CONFIG_MXC_SPI
	53	#define CONFIG_SF_DEFAULT_BUS 0
	54	#define CONFIG_SF_DEFAULT_CS (0\|(IMX_GPIO_NR(3, 19)<<8))
	55	#define CONFIG_SF_DEFAULT_SPEED 25000000
	56	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	57	#endif
	58
	59	/* I2C Configs */
	60	#define CONFIG_CMD_I2C
b089d039	61	#define CONFIG_SYS_I2C
b089d039	62	#define CONFIG_SYS_I2C_MXC
d67b0d97 EN	63	#define CONFIG_SYS_I2C_SPEED 100000
d67b0d97 EN	64
d67b0d97 EN	65	/* MMC Configs */
	66	#define CONFIG_FSL_ESDHC
	67	#define CONFIG_FSL_USDHC
	68	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	69	#define CONFIG_SYS_FSL_USDHC_NUM 2
	70
	71	#define CONFIG_MMC
	72	#define CONFIG_CMD_MMC
	73	#define CONFIG_GENERIC_MMC
	74	#define CONFIG_BOUNCE_BUFFER
	75	#define CONFIG_CMD_EXT2
	76	#define CONFIG_CMD_FAT
	77	#define CONFIG_DOS_PARTITION
	78
	79	#ifdef CONFIG_MX6Q
	80	#define CONFIG_CMD_SATA
	81	#endif
	82
	83	/*
	84	* SATA Configs
	85	*/
	86	#ifdef CONFIG_CMD_SATA
	87	#define CONFIG_DWC_AHSATA
	88	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	89	#define CONFIG_DWC_AHSATA_PORT_ID 0
	90	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	91	#define CONFIG_LBA48
	92	#define CONFIG_LIBATA
	93	#endif
	94
	95	#define CONFIG_CMD_PING
	96	#define CONFIG_CMD_DHCP
	97	#define CONFIG_CMD_MII
	98	#define CONFIG_CMD_NET
	99	#define CONFIG_FEC_MXC
	100	#define CONFIG_MII
	101	#define IMX_FEC_BASE ENET_BASE_ADDR
	102	#define CONFIG_FEC_XCV_TYPE RGMII
	103	#define CONFIG_ETHPRIME "FEC"
	104	#define CONFIG_FEC_MXC_PHYADDR 6
	105	#define CONFIG_PHYLIB
	106	#define CONFIG_PHY_MICREL
	107	#define CONFIG_PHY_MICREL_KSZ9021
	108
	109	/* USB Configs */
	110	#define CONFIG_CMD_USB
	111	#define CONFIG_CMD_FAT
	112	#define CONFIG_USB_EHCI
	113	#define CONFIG_USB_EHCI_MX6
	114	#define CONFIG_USB_STORAGE
	115	#define CONFIG_USB_HOST_ETHER
	116	#define CONFIG_USB_ETHER_ASIX
	117	#define CONFIG_USB_ETHER_SMSC95XX
d1a52860 TK	118	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
d1a52860 TK	119	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
d67b0d97 EN	120	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	121	#define CONFIG_MXC_USB_FLAGS 0
	122
	123	/* Miscellaneous commands */
	124	#define CONFIG_CMD_BMODE
	125	#define CONFIG_CMD_SETEXPR
	126
	127	/* Framebuffer and LCD */
	128	#define CONFIG_VIDEO
	129	#define CONFIG_VIDEO_IPUV3
	130	#define CONFIG_CFB_CONSOLE
	131	#define CONFIG_VGA_AS_SINGLE_DEVICE
	132	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	133	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	134	#define CONFIG_VIDEO_BMP_RLE8
	135	#define CONFIG_SPLASH_SCREEN
	136	#define CONFIG_BMP_16BPP
	137	#define CONFIG_VIDEO_LOGO
	138	#define CONFIG_IPUV3_CLK 260000000
	139	#define CONFIG_CMD_HDMIDETECT
	140	#define CONFIG_CONSOLE_MUX
5ea7f0e3	141	#define CONFIG_IMX_HDMI
d67b0d97 EN	142
	143	/* allow to overwrite serial and ethaddr */
	144	#define CONFIG_ENV_OVERWRITE
	145	#define CONFIG_CONS_INDEX 1
	146	#define CONFIG_BAUDRATE 115200
	147
	148	/* Command definition */
	149	#include <config_cmd_default.h>
	150
	151	#undef CONFIG_CMD_IMLS
	152
	153	#define CONFIG_BOOTDELAY 1
	154
	155	#define CONFIG_PREBOOT ""
	156
	157	#define CONFIG_LOADADDR 0x12000000
	158	#define CONFIG_SYS_TEXT_BASE 0x17800000
	159
	160	#ifdef CONFIG_CMD_SATA
	161	#define CONFIG_DRIVE_SATA "sata "
	162	#else
	163	#define CONFIG_DRIVE_SATA
	164	#endif
	165
	166	#ifdef CONFIG_CMD_MMC
	167	#define CONFIG_DRIVE_MMC "mmc "
	168	#else
	169	#define CONFIG_DRIVE_MMC
	170	#endif
	171
	172	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
	173
f8b1e86d FE	174	#if defined(CONFIG_SABRELITE)
	175	#define CONFIG_EXTRA_ENV_SETTINGS \
	176	"script=boot.scr\0" \
	177	"uimage=uImage\0" \
	178	"console=ttymxc1\0" \
	179	"fdt_high=0xffffffff\0" \
	180	"initrd_high=0xffffffff\0" \
	181	"fdt_file=imx6q-sabrelite.dtb\0" \
	182	"fdt_addr=0x11000000\0" \
	183	"boot_fdt=try\0" \
	184	"ip_dyn=yes\0" \
	185	"mmcdev=0\0" \
	186	"mmcpart=1\0" \
	187	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	188	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	189	"root=${mmcroot}\0" \
	190	"loadbootscript=" \
	191	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	192	"bootscript=echo Running bootscript from mmc ...; " \
	193	"source\0" \
	194	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	195	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	196	"mmcboot=echo Booting from mmc ...; " \
	197	"run mmcargs; " \
	198	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	199	"if run loadfdt; then " \
	200	"bootm ${loadaddr} - ${fdt_addr}; " \
	201	"else " \
	202	"if test ${boot_fdt} = try; then " \
	203	"bootm; " \
	204	"else " \
	205	"echo WARN: Cannot load the DT; " \
	206	"fi; " \
	207	"fi; " \
	208	"else " \
	209	"bootm; " \
	210	"fi;\0" \
	211	"netargs=setenv bootargs console=${console},${baudrate} " \
	212	"root=/dev/nfs " \
	213	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	214	"netboot=echo Booting from net ...; " \
	215	"run netargs; " \
	216	"if test ${ip_dyn} = yes; then " \
	217	"setenv get_cmd dhcp; " \
	218	"else " \
	219	"setenv get_cmd tftp; " \
	220	"fi; " \
	221	"${get_cmd} ${uimage}; " \
	222	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	223	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	224	"bootm ${loadaddr} - ${fdt_addr}; " \
	225	"else " \
	226	"if test ${boot_fdt} = try; then " \
	227	"bootm; " \
	228	"else " \
	229	"echo WARN: Cannot load the DT; " \
	230	"fi; " \
	231	"fi; " \
	232	"else " \
	233	"bootm; " \
	234	"fi;\0"
	235
	236	#define CONFIG_BOOTCOMMAND \
	237	"mmc dev ${mmcdev}; if mmc rescan; then " \
238	"if run loadbootscript; then " \
239	"run bootscript; " \
240	"else " \
241	"if run loaduimage; then " \
242	"run mmcboot; " \
243	"else run netboot; " \
244	"fi; " \
245	"fi; " \
246	"else run netboot; fi"
247	#else
d67b0d97 EN	248	#define CONFIG_EXTRA_ENV_SETTINGS \
	249	"console=ttymxc1\0" \
	250	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	251	"sf erase 0xc0000 0x2000 && " \
	252	"echo restored environment to factory default ; fi\0" \
	253	"bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
	254	"; do " \
	255	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
	256	"for fs in fat ext2 ; do " \
	257	"${fs}load " \
	258	"${dtype} ${disk}:1 " \
	259	"10008000 " \
	260	"/6x_bootscript" \
	261	"&& source 10008000 ; " \
	262	"done ; " \
	263	"done ; " \
	264	"done; " \
	265	"setenv stdout serial,vga ; " \
	266	"echo ; echo 6x_bootscript not found ; " \
	267	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	268	"echo details at http://boundarydevices.com/6q_bootscript ; " \
	269	"setenv stdout serial\0" \
	270	"upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
	271	"; do " \
	272	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
	273	"for fs in fat ext2 ; do " \
	274	"${fs}load ${dtype} ${disk}:1 10008000 " \
	275	"/6x_upgrade " \
	276	"&& source 10008000 ; " \
	277	"done ; " \
	278	"done ; " \
	279	"done\0" \
	280
f8b1e86d	281	#endif
d67b0d97 EN	282	/* Miscellaneous configurable options */
	283	#define CONFIG_SYS_LONGHELP
	284	#define CONFIG_SYS_HUSH_PARSER
	285	#define CONFIG_SYS_PROMPT "U-Boot > "
	286	#define CONFIG_AUTO_COMPLETE
	287	#define CONFIG_SYS_CBSIZE 1024
	288
	289	/* Print Buffer Size */
	290	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	291	#define CONFIG_SYS_MAXARGS 16
	292	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	293
	294	#define CONFIG_SYS_MEMTEST_START 0x10000000
	295	#define CONFIG_SYS_MEMTEST_END 0x10010000
	296	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	297
	298	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
d67b0d97 EN	299
	300	#define CONFIG_CMDLINE_EDITING
	301
	302	/* Physical Memory Map */
	303	#define CONFIG_NR_DRAM_BANKS 1
	304	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	305
	306	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	307	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	308	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	309
	310	#define CONFIG_SYS_INIT_SP_OFFSET \
	311	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	312	#define CONFIG_SYS_INIT_SP_ADDR \
	313	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	314
	315	/* FLASH and environment organization */
	316	#define CONFIG_SYS_NO_FLASH
	317
	318	#define CONFIG_ENV_SIZE (8 * 1024)
	319
f8b1e86d FE	320	#if defined(CONFIG_SABRELITE)
	321	#define CONFIG_ENV_IS_IN_MMC
	322	#else
d67b0d97	323	#define CONFIG_ENV_IS_IN_SPI_FLASH
f8b1e86d	324	#endif
d67b0d97 EN	325
	326	#if defined(CONFIG_ENV_IS_IN_MMC)
	327	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	328	#define CONFIG_SYS_MMC_ENV_DEV 0
	329	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	330	#define CONFIG_ENV_OFFSET (768 * 1024)
	331	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	332	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	333	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	334	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	335	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	336	#endif
	337
	338	#define CONFIG_OF_LIBFDT
	339	#define CONFIG_CMD_BOOTZ
	340
d67b0d97 EN	341	#ifndef CONFIG_SYS_DCACHE_OFF
	342	#define CONFIG_CMD_CACHE
	343	#endif
	344
	345	#define CONFIG_CMD_BMP
	346
	347	#define CONFIG_CMD_TIME
	348	#define CONFIG_SYS_ALT_MEMTEST
	349
9b9ba6f0	350	#define CONFIG_CMD_BOOTZ
36558295	351	#define CONFIG_SUPPORT_RAW_INITRD
262326b4	352	#define CONFIG_CMD_FS_GENERIC
9b9ba6f0	353
d67b0d97	354	#endif /* __CONFIG_H */