[people/ms/u-boot.git] / include / configs / novena.h

/*
 * Configuration settings for the Novena U-Boot.
 *
 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* System configurations */
#define CONFIG_MISC_INIT_R
#define CONFIG_KEYBOARD

#include <config_distro_defaults.h>
#include "mx6_common.h"

/* U-Boot Commands */
#define CONFIG_CMD_PCI

/* U-Boot general configurations */

/* U-Boot environment */
#define CONFIG_ENV_SIZE			(16 * 1024)
/*
 * Environment is on MMC, starting at offset 512KiB from start of the card.
 * Please place first partition at offset 1MiB from the start of the card
 * as recommended by GNU/fdisk. See below for details:
 * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
 */
#ifdef CONFIG_CMD_MMC
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_ENV_OFFSET		(512 * 1024)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_OFFSET_REDUND	\
		(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

/* Booting Linux */
#define CONFIG_BOOTFILE			"fitImage"
#define CONFIG_BOOTARGS			"console=ttymxc1,115200 "
#define CONFIG_BOOTCOMMAND		"run distro_bootcmd ; run net_nfs"
#define CONFIG_HOSTNAME			novena

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		0x20000000

#define CONFIG_SYS_MALLOC_LEN		(64 * 1024 * 1024)

/* SPL */
#include "imx6_spl.h"			/* common IMX6 SPL configuration */

/* Ethernet Configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		0x7
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_ARP_TIMEOUT		200UL
#endif

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_SPD_BUS_NUM		0

/* I2C EEPROM */
#ifdef CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#define CONFIG_SYS_I2C_EEPROM_BUS	2
#endif

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* PCI express */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(3, 29)
#define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(7, 12)
#endif

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08

/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART2_BASE

/* USB Configs */
#ifdef CONFIG_CMD_USB
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
/* Gadget part */
#define CONFIG_USBD_HS
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#endif

/* Video output */
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK		260000000
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
#endif

/* Extra U-Boot environment. */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS					\
	"fdt_high=0xffffffff\0"						\
	"initrd_high=0xffffffff\0"					\
	"consdev=ttymxc1\0"						\
	"baudrate=115200\0"						\
	"bootdev=/dev/mmcblk0p1\0"					\
	"rootdev=/dev/mmcblk0p2\0"					\
	"netdev=eth0\0"							\
	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0"		\
	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0"			\
	"ramdisk_addr_r=0x28000000\0"		   			\
	"fdt_addr_r=0x18000000\0"					\
	"fdtfile=imx6q-novena.dtb\0"					\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addargs=run addcons addmisc\0"					\
	"mmcload="							\
		"mmc rescan ; "						\
		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"update_sd_spl_filename=SPL\0"					\
	"update_sd_uboot_filename=u-boot.img\0"				\
	"update_sd_firmware="	/* Update the SD firmware partition */	\
		"if mmc rescan ; then "					\
		"if dhcp ${update_sd_spl_filename} ; then "		\
		"mmc write ${loadaddr} 2 0x200 ; "			\
		"fi ; "							\
		"if dhcp ${update_sd_uboot_filename} ; then "		\
		"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
		"fi ; "							\
		"fi\0"							\
	BOOTENV

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SATA, sata, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#else
#define CONFIG_EXTRA_ENV_SETTINGS
#endif /* CONFIG_SPL_BUILD */

#endif				/* __CONFIG_H */
Commit	Line	Data
f91c09ac	1	/*
a187559e	2	* Configuration settings for the Novena U-Boot.
f91c09ac MV	3	*
	4	* Copyright (C) 2014 Marek Vasut <marex@denx.de>
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __CONFIG_H
	10	#define __CONFIG_H
	11
	12	/* System configurations */
f91c09ac	13	#define CONFIG_MISC_INIT_R
f91c09ac	14	#define CONFIG_KEYBOARD
f91c09ac	15
1c2d4a50	16	#include <config_distro_defaults.h>
60667a53	17	#include "mx6_common.h"
f91c09ac MV	18
f91c09ac MV	19	/* U-Boot Commands */
f91c09ac	20	#define CONFIG_CMD_PCI
f91c09ac MV	21
f91c09ac MV	22	/* U-Boot general configurations */
f91c09ac MV	23
f91c09ac MV	24	/* U-Boot environment */
f91c09ac MV	25	#define CONFIG_ENV_SIZE (16 * 1024)
	26	/*
	27	* Environment is on MMC, starting at offset 512KiB from start of the card.
	28	* Please place first partition at offset 1MiB from the start of the card
	29	* as recommended by GNU/fdisk. See below for details:
	30	* http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
	31	*/
	32	#ifdef CONFIG_CMD_MMC
	33	#define CONFIG_ENV_IS_IN_MMC
	34	#define CONFIG_SYS_MMC_ENV_DEV 0
	35	#define CONFIG_ENV_OFFSET (512 * 1024)
	36	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	37	#define CONFIG_ENV_OFFSET_REDUND \
	38	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
	39	#else
	40	#define CONFIG_ENV_IS_NOWHERE
	41	#endif
	42
	43	/* Booting Linux */
f91c09ac MV	44	#define CONFIG_BOOTFILE "fitImage"
f91c09ac MV	45	#define CONFIG_BOOTARGS "console=ttymxc1,115200 "
1c2d4a50	46	#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
f91c09ac MV	47	#define CONFIG_HOSTNAME novena
	48
	49	/* Physical Memory Map */
	50	#define CONFIG_NR_DRAM_BANKS 1
	51	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
f91c09ac MV	52
	53	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	54	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	55	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	56
	57	#define CONFIG_SYS_INIT_SP_OFFSET \
	58	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	59	#define CONFIG_SYS_INIT_SP_ADDR \
	60	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	61
	62	#define CONFIG_SYS_MEMTEST_START 0x10000000
	63	#define CONFIG_SYS_MEMTEST_END 0x20000000
	64
	65	#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
	66
	67	/* SPL */
f91c09ac MV	68	#include "imx6_spl.h" /* common IMX6 SPL configuration */
f91c09ac MV	69
f91c09ac MV	70	/* Ethernet Configuration */
	71	#ifdef CONFIG_CMD_NET
	72	#define CONFIG_FEC_MXC
	73	#define CONFIG_MII
	74	#define IMX_FEC_BASE ENET_BASE_ADDR
	75	#define CONFIG_FEC_XCV_TYPE RGMII
	76	#define CONFIG_ETHPRIME "FEC"
	77	#define CONFIG_FEC_MXC_PHYADDR 0x7
	78	#define CONFIG_PHYLIB
	79	#define CONFIG_PHY_MICREL
	80	#define CONFIG_PHY_MICREL_KSZ9021
	81	#define CONFIG_ARP_TIMEOUT 200UL
	82	#endif
	83
	84	/* I2C */
	85	#define CONFIG_SYS_I2C
	86	#define CONFIG_SYS_I2C_MXC
03544c66 AA	87	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	88	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	89	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
f91c09ac MV	90	#define CONFIG_I2C_MULTI_BUS
	91	#define CONFIG_I2C_MXC
	92	#define CONFIG_SYS_I2C_SPEED 100000
735b1a2e	93	#define CONFIG_SYS_SPD_BUS_NUM 0
f91c09ac MV	94
	95	/* I2C EEPROM */
	96	#ifdef CONFIG_CMD_EEPROM
	97	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
735b1a2e	98	#define CONFIG_SYS_I2C_EEPROM_BUS 2
f91c09ac MV	99	#endif
	100
	101	/* MMC Configs */
f91c09ac MV	102	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
f91c09ac MV	103	#define CONFIG_SYS_FSL_USDHC_NUM 2
f91c09ac	104
f91c09ac MV	105	/* PCI express */
f91c09ac MV	106	#ifdef CONFIG_CMD_PCI
f91c09ac MV	107	#define CONFIG_PCI_SCAN_SHOW
	108	#define CONFIG_PCIE_IMX
	109	#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
	110	#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
	111	#endif
	112
	113	/* PMIC */
	114	#define CONFIG_POWER
	115	#define CONFIG_POWER_I2C
	116	#define CONFIG_POWER_PFUZE100
	117	#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
	118
	119	/* SATA Configs */
	120	#ifdef CONFIG_CMD_SATA
	121	#define CONFIG_DWC_AHSATA
	122	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	123	#define CONFIG_DWC_AHSATA_PORT_ID 0
	124	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	125	#define CONFIG_LBA48
	126	#define CONFIG_LIBATA
	127	#endif
	128
	129	/* UART */
	130	#define CONFIG_MXC_UART
	131	#define CONFIG_MXC_UART_BASE UART2_BASE
f91c09ac MV	132
	133	/* USB Configs */
	134	#ifdef CONFIG_CMD_USB
f91c09ac MV	135	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
	136	#define CONFIG_USB_HOST_ETHER
	137	#define CONFIG_USB_ETHER_ASIX
	138	#define CONFIG_USB_ETHER_SMSC95XX
	139	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	140	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	141	#define CONFIG_MXC_USB_FLAGS 0
	142	/* Gadget part */
f91c09ac	143	#define CONFIG_USBD_HS
f91c09ac MV	144	#define CONFIG_USB_ETHER
	145	#define CONFIG_USB_ETH_CDC
	146	#define CONFIG_NETCONSOLE
	147	#endif
	148
	149	/* Video output */
	150	#ifdef CONFIG_VIDEO
f91c09ac	151	#define CONFIG_VIDEO_IPUV3
f91c09ac MV	152	#define CONFIG_VIDEO_BMP_RLE8
	153	#define CONFIG_SPLASH_SCREEN
	154	#define CONFIG_BMP_16BPP
	155	#define CONFIG_VIDEO_LOGO
	156	#define CONFIG_IPUV3_CLK 260000000
f91c09ac MV	157	#define CONFIG_IMX_HDMI
	158	#define CONFIG_IMX_VIDEO_SKIP
	159	#endif
	160
	161	/* Extra U-Boot environment. */
1c2d4a50	162	#ifndef CONFIG_SPL_BUILD
f91c09ac MV	163	#define CONFIG_EXTRA_ENV_SETTINGS \
	164	"fdt_high=0xffffffff\0" \
	165	"initrd_high=0xffffffff\0" \
	166	"consdev=ttymxc1\0" \
	167	"baudrate=115200\0" \
	168	"bootdev=/dev/mmcblk0p1\0" \
	169	"rootdev=/dev/mmcblk0p2\0" \
	170	"netdev=eth0\0" \
233509a5	171	"kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
1c2d4a50 VC	172	"pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
	173	"scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
	174	"ramdisk_addr_r=0x28000000\0" \
	175	"fdt_addr_r=0x18000000\0" \
	176	"fdtfile=imx6q-novena.dtb\0" \
f91c09ac MV	177	"addcons=" \
	178	"setenv bootargs ${bootargs} " \
	179	"console=${consdev},${baudrate}\0" \
	180	"addip=" \
	181	"setenv bootargs ${bootargs} " \
	182	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	183	"${netmask}:${hostname}:${netdev}:off\0" \
	184	"addmisc=" \
	185	"setenv bootargs ${bootargs} ${miscargs}\0" \
	186	"addargs=run addcons addmisc\0" \
	187	"mmcload=" \
	188	"mmc rescan ; " \
	189	"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
	190	"netload=" \
	191	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	192	"miscargs=nohlt panic=1\0" \
	193	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	194	"nfsargs=" \
	195	"setenv bootargs root=/dev/nfs rw " \
	196	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	197	"mmc_mmc=" \
	198	"run mmcload mmcargs addargs ; " \
	199	"bootm ${kernel_addr_r}\0" \
	200	"mmc_nfs=" \
	201	"run mmcload nfsargs addip addargs ; " \
	202	"bootm ${kernel_addr_r}\0" \
	203	"net_mmc=" \
	204	"run netload mmcargs addargs ; " \
	205	"bootm ${kernel_addr_r}\0" \
	206	"net_nfs=" \
	207	"run netload nfsargs addip addargs ; " \
	208	"bootm ${kernel_addr_r}\0" \
	209	"update_sd_spl_filename=SPL\0" \
	210	"update_sd_uboot_filename=u-boot.img\0" \
	211	"update_sd_firmware=" /* Update the SD firmware partition */ \
	212	"if mmc rescan ; then " \
	213	"if dhcp ${update_sd_spl_filename} ; then " \
	214	"mmc write ${loadaddr} 2 0x200 ; " \
	215	"fi ; " \
	216	"if dhcp ${update_sd_uboot_filename} ; then " \
	217	"fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
	218	"fi ; " \
	219	"fi\0" \
1c2d4a50 VC	220	BOOTENV
	221
	222	#define BOOT_TARGET_DEVICES(func) \
	223	func(MMC, mmc, 0) \
	224	func(USB, usb, 0) \
	225	func(SATA, sata, 0) \
	226	func(PXE, pxe, na) \
	227	func(DHCP, dhcp, na)
	228
	229	#include <config_distro_bootcmd.h>
	230
	231	#else
	232	#define CONFIG_EXTRA_ENV_SETTINGS
	233	#endif /* CONFIG_SPL_BUILD */
f91c09ac MV	234
f91c09ac MV	235	#endif /* __CONFIG_H */