[people/ms/u-boot.git] / include / configs / omap3_mvblx.h

/*
 * MATRIX VISION GmbH mvBlueLYNX-X
 *
 * Derived from omap3_beagle.h:
 * (C) Copyright 2006-2008
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 *
 * Configuration settings for the TI OMAP3530 Beagle board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP		1	/* in a TI OMAP core */
#define CONFIG_MVBLX		1	/* working with mvBlueLYNX-X */
#define CONFIG_MACH_TYPE	MACH_TYPE_MVBLX
#define CONFIG_OMAP_GPIO
#define CONFIG_OMAP_COMMON

#define CONFIG_SDRC	/* The chip has SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_OF_LIBFDT		1

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1
#define CONFIG_REVISION_TAG		1
#define CONFIG_SERIAL_TAG		1

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(2 << 10)	/* 2 KiB */
						/* Sector */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
#define CONFIG_SERIAL1			1	/* UART1 */

#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}
#define CONFIG_GENERIC_MMC		1
#define CONFIG_MMC			1
#define CONFIG_OMAP_HSMMC		1
#define CONFIG_DOS_PARTITION		1

/* silent console by default */
#define CONFIG_SYS_DEVICE_NULLDEV	1
#define CONFIG_SILENT_CONSOLE		1

/* USB */
#define CONFIG_MUSB_UDC			1
#define CONFIG_USB_OMAP3		1
#define CONFIG_TWL4030_USB		1

/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
#define CONFIG_USBD_VENDORID			0x164c
#define CONFIG_USBD_PRODUCTID_GSERIAL	0x0201
#define CONFIG_USBD_PRODUCTID_CDCACM	0x0201
#define CONFIG_USBD_MANUFACTURER		"MATRIX VISION GmbH"
#define CONFIG_USBD_PRODUCT_NAME		"mvBlueLYNX-X"

/* no FLASH available */
#define CONFIG_SYS_NO_FLASH

/* commands to include */
#include <config_cmd_default.h>

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_IMI		/* iminfo			*/
#undef CONFIG_CMD_IMLS		/* List all found images	*/
#define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
#define CONFIG_CMD_NFS		/* NFS support			*/
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_FPGA_LOADMK

#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
#define CONFIG_SYS_I2C_OMAP34XX

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER		1

/* Environment information */
#undef CONFIG_ENV_OVERWRITE	/* disallow overwriting serial# and ethaddr */
#define CONFIG_BOOTDELAY		0
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR "S"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"silent=true\0" \
	"loadaddr=0x82000000\0" \
	"usbtty=cdc_acm\0" \
	"console=ttyO0,115200n8\0" \
	"mpurate=600\0" \
	"vram=12M\0" \
	"dvimode=1024x768-24@60\0" \
	"defaultdisplay=dvi\0" \
	"loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
		"/lib/firmware/mvblx/${fpgafilename}; then " \
			"fpga load 0 ${loadaddr} ${filesize}; " \
		"fi;\0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext3 rootwait\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype} " \
		"mvfw.fpgavers=${fpgavers} " \
		"${cmdline_suffix}\0" \
	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"mmcbootcmd= " \
		"echo Trying mmc${mmcdev}; " \
		"mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \
			"echo SD/MMC found on device ${mmcdev};" \
			"if run loadbootenv; then " \
			   "echo Loading boot environment from mmc${mmcdev}; " \
			   "run importbootenv; " \
			"fi;" \
			"run loadfpga; " \
			"if test -n $uenvcmd; then " \
				"echo Running uenvcmd ...;" \
				"run uenvcmd;" \
			"fi;" \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"fi;" \
		"fi\0"

#define CONFIG_BOOTCOMMAND \
	"setenv mmcdev 1;" \
	"run mmcbootcmd || " \
	"setenv mmcdev 0;" \
	"run mmcbootcmd"


#define CONFIG_AUTO_COMPLETE		1
/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		"mvblx # "
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_SYS_ALT_MEMTEST      1 /* alternative memtest with looping */
#define CONFIG_SYS_MEMTEST_START	(0x82000000)	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		(0x9dffffff)	/* end = 448 MB */
#define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)    /* dummy address */

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

#define CONFIG_ENV_IS_NOWHERE	1

/*----------------------------------------------------------------------------
 * Network Subsystem (SMSC9211 Ethernet from SMSC9118 family)
 *----------------------------------------------------------------------------
 */
#if defined(CONFIG_CMD_NET)
  #define CONFIG_SMC911X		1
  #define CONFIG_SMC911X_32_BIT
  #define CONFIG_SMC911X_BASE     0x2C000000
#endif /* (CONFIG_CMD_NET) */

#define CONFIG_FPGA_COUNT	1
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_CYCLON2
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE

#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4  /* 2^4 = 16-byte pages */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */
#define CONFIG_ID_EEPROM
#define CONFIG_SYS_EEPROM_BUS_NUM	2

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)

#define CONFIG_OMAP3_SPI

#define CONFIG_SYS_CACHELINE_SIZE	64

#endif /* __CONFIG_H */
Commit	Line	Data
84d7a017 MJ	1	/*
	2	* MATRIX VISION GmbH mvBlueLYNX-X
	3	*
	4	* Derived from omap3_beagle.h:
	5	* (C) Copyright 2006-2008
	6	* Texas Instruments.
	7	* Richard Woodruff <r-woodruff2@ti.com>
	8	* Syed Mohammed Khasim <x0khasim@ti.com>
	9	*
	10	* Configuration settings for the TI OMAP3530 Beagle board.
	11	*
3765b3e7	12	* SPDX-License-Identifier: GPL-2.0+
84d7a017 MJ	13	*/
	14
	15	#ifndef __CONFIG_H
	16	#define __CONFIG_H
	17
	18	/*
	19	* High Level Configuration Options
	20	*/
84d7a017	21	#define CONFIG_OMAP 1 /* in a TI OMAP core */
84d7a017 MJ	22	#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */
84d7a017 MJ	23	#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX
308252ad	24	#define CONFIG_OMAP_GPIO
806d2792	25	#define CONFIG_OMAP_COMMON
84d7a017 MJ	26
	27	#define CONFIG_SDRC /* The chip has SDRC controller */
	28
	29	#include <asm/arch/cpu.h> /* get chip and board defs */
	30	#include <asm/arch/omap3.h>
	31
	32	/*
	33	* Display CPU and Board information
	34	*/
	35	#define CONFIG_DISPLAY_CPUINFO 1
	36	#define CONFIG_DISPLAY_BOARDINFO 1
	37
	38	/* Clock Defines */
	39	#define V_OSCK 26000000 /* Clock output from T2 */
	40	#define V_SCLK (V_OSCK >> 1)
	41
84d7a017 MJ	42	#define CONFIG_MISC_INIT_R
	43
	44	#define CONFIG_OF_LIBFDT 1
	45
	46	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	47	#define CONFIG_SETUP_MEMORY_TAGS 1
	48	#define CONFIG_INITRD_TAG 1
	49	#define CONFIG_REVISION_TAG 1
	50	#define CONFIG_SERIAL_TAG 1
	51
	52	/*
	53	* Size of malloc() pool
	54	*/
	55	#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */
	56	/* Sector */
	57	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
	58
	59	/*
	60	* Hardware drivers
	61	*/
	62
	63	/*
	64	* NS16550 Configuration
	65	*/
	66	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	67
	68	#define CONFIG_SYS_NS16550
	69	#define CONFIG_SYS_NS16550_SERIAL
	70	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	71	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	72
	73	/*
	74	* select serial console configuration
	75	*/
661bb0f8 HG	76	#define CONFIG_CONS_INDEX 1
	77	#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
	78	#define CONFIG_SERIAL1 1 /* UART1 */
84d7a017 MJ	79
	80	#define CONFIG_BAUDRATE 115200
	81	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	82	115200}
	83	#define CONFIG_GENERIC_MMC 1
	84	#define CONFIG_MMC 1
	85	#define CONFIG_OMAP_HSMMC 1
	86	#define CONFIG_DOS_PARTITION 1
	87
661bb0f8 HG	88	/* silent console by default */
	89	#define CONFIG_SYS_DEVICE_NULLDEV 1
	90	#define CONFIG_SILENT_CONSOLE 1
	91
84d7a017 MJ	92	/* USB */
	93	#define CONFIG_MUSB_UDC 1
	94	#define CONFIG_USB_OMAP3 1
	95	#define CONFIG_TWL4030_USB 1
	96
	97	/* USB device configuration */
	98	#define CONFIG_USB_DEVICE 1
	99	#define CONFIG_USB_TTY 1
	100	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	101	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
	102	#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1
	103	#define CONFIG_USBD_VENDORID 0x164c
	104	#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201
	105	#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201
	106	#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH"
	107	#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X"
	108
	109	/* no FLASH available */
	110	#define CONFIG_SYS_NO_FLASH
	111
	112	/* commands to include */
	113	#include <config_cmd_default.h>
	114
	115	#define CONFIG_CMD_CACHE
	116	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	117	#define CONFIG_CMD_FAT /* FAT support */
	118	#define CONFIG_CMD_I2C /* I2C serial bus support */
	119	#define CONFIG_CMD_MMC /* MMC support */
	120	#define CONFIG_CMD_EEPROM
	121	#define CONFIG_CMD_IMI /* iminfo */
	122	#undef CONFIG_CMD_IMLS /* List all found images */
	123	#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
	124	#define CONFIG_CMD_NFS /* NFS support */
	125	#define CONFIG_CMD_DHCP
	126	#define CONFIG_CMD_PING
	127	#define CONFIG_CMD_FPGA
64e809af	128	#define CONFIG_CMD_FPGA_LOADMK
84d7a017	129
6789e84e HS	130	#define CONFIG_SYS_I2C
	131	#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
	132	#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
	133	#define CONFIG_SYS_I2C_OMAP34XX
84d7a017 MJ	134
	135	/*
	136	* TWL4030
	137	*/
	138	#define CONFIG_TWL4030_POWER 1
	139
	140	/* Environment information */
	141	#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */
661bb0f8 HG	142	#define CONFIG_BOOTDELAY 0
	143	#define CONFIG_ZERO_BOOTDELAY_CHECK
	144	#define CONFIG_AUTOBOOT_KEYED
	145	#define CONFIG_AUTOBOOT_STOP_STR "S"
84d7a017 MJ	146
84d7a017 MJ	147	#define CONFIG_EXTRA_ENV_SETTINGS \
661bb0f8	148	"silent=true\0" \
84d7a017 MJ	149	"loadaddr=0x82000000\0" \
84d7a017 MJ	150	"usbtty=cdc_acm\0" \
661bb0f8	151	"console=ttyO0,115200n8\0" \
84d7a017 MJ	152	"mpurate=600\0" \
	153	"vram=12M\0" \
	154	"dvimode=1024x768-24@60\0" \
	155	"defaultdisplay=dvi\0" \
71c4ae3f MJ	156	"loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\
	157	"/lib/firmware/mvblx/${fpgafilename}; then " \
	158	"fpga load 0 ${loadaddr} ${filesize}; " \
84d7a017 MJ	159	"fi;\0" \
	160	"mmcdev=0\0" \
	161	"mmcroot=/dev/mmcblk0p2 rw\0" \
	162	"mmcrootfstype=ext3 rootwait\0" \
	163	"mmcargs=setenv bootargs console=${console} " \
	164	"mpurate=${mpurate} " \
	165	"vram=${vram} " \
	166	"omapfb.mode=dvi:${dvimode} " \
	167	"omapfb.debug=y " \
	168	"omapdss.def_disp=${defaultdisplay} " \
	169	"root=${mmcroot} " \
	170	"rootfstype=${mmcrootfstype} " \
bb4d4645	171	"mvfw.fpgavers=${fpgavers} " \
84d7a017 MJ	172	"${cmdline_suffix}\0" \
	173	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
	174	"importbootenv=echo Importing environment from mmc ...; " \
	175	"env import -t $loadaddr $filesize\0" \
	176	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
	177	"mmcboot=echo Booting from mmc ...; " \
	178	"run mmcargs; " \
	179	"bootm ${loadaddr}\0" \
	180	"mmcbootcmd= " \
	181	"echo Trying mmc${mmcdev}; " \
	182	"mmc dev ${mmcdev}; " \
	183	"if mmc rescan; then " \
	184	"setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \
	185	"echo SD/MMC found on device ${mmcdev};" \
	186	"if run loadbootenv; then " \
	187	"echo Loading boot environment from mmc${mmcdev}; " \
	188	"run importbootenv; " \
	189	"fi;" \
	190	"run loadfpga; " \
	191	"if test -n $uenvcmd; then " \
	192	"echo Running uenvcmd ...;" \
	193	"run uenvcmd;" \
	194	"fi;" \
	195	"if run loaduimage; then " \
	196	"run mmcboot; " \
	197	"fi;" \
	198	"fi\0"
	199
	200	#define CONFIG_BOOTCOMMAND \
	201	"setenv mmcdev 1;" \
	202	"run mmcbootcmd \|\| " \
	203	"setenv mmcdev 0;" \
	204	"run mmcbootcmd"
	205
	206
	207	#define CONFIG_AUTO_COMPLETE 1
	208	/*
	209	* Miscellaneous configurable options
	210	*/
	211	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	212	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
84d7a017 MJ	213	#define CONFIG_SYS_PROMPT "mvblx # "
	214	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	215	/* Print Buffer Size */
	216	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	217	sizeof(CONFIG_SYS_PROMPT) + 16)
	218	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	219	/* Boot Argument Buffer Size */
	220	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	221
	222	#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */
	223	#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */
	224	#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */
	225	#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
	226
	227	/* default load address */
	228	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
	229
	230	/*
	231	* OMAP3 has 12 GP timers, they can be driven by the system clock
	232	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	233	* This rate is divided by a local divisor.
	234	*/
	235	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	236	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
84d7a017	237
84d7a017 MJ	238	/*-----------------------------------------------------------------------
	239	* Physical Memory Map
	240	*/
	241	#define CONFIG_NR_DRAM_BANKS 1
	242	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
84d7a017 MJ	243	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
84d7a017 MJ	244
84d7a017 MJ	245	#define CONFIG_ENV_IS_NOWHERE 1
	246
	247	/*----------------------------------------------------------------------------
	248	* Network Subsystem (SMSC9211 Ethernet from SMSC9118 family)
	249	*----------------------------------------------------------------------------
	250	*/
	251	#if defined(CONFIG_CMD_NET)
84d7a017 MJ	252	#define CONFIG_SMC911X 1
	253	#define CONFIG_SMC911X_32_BIT
	254	#define CONFIG_SMC911X_BASE 0x2C000000
	255	#endif /* (CONFIG_CMD_NET) */
	256
	257	#define CONFIG_FPGA_COUNT 1
b03b25ca	258	#define CONFIG_FPGA
84d7a017 MJ	259	#define CONFIG_FPGA_ALTERA
	260	#define CONFIG_FPGA_CYCLON2
	261	#define CONFIG_SYS_FPGA_PROG_FEEDBACK
	262	#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
	263
	264	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */
	265	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	266	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */
	267	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	268	#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */
	269	#define CONFIG_ID_EEPROM
	270	#define CONFIG_SYS_EEPROM_BUS_NUM 2
	271
	272	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	273	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	274	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	275	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	276	CONFIG_SYS_INIT_RAM_SIZE - \
	277	GENERATED_GBL_DATA_SIZE)
	278
	279	#define CONFIG_OMAP3_SPI
	280
8e40852f A	281	#define CONFIG_SYS_CACHELINE_SIZE 64
8e40852f A	282
84d7a017	283	#endif /* __CONFIG_H */