]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/p2371-2180.h
tegra: Remove tegra_spl_gpio_direction_output declaration from header file
[people/ms/u-boot.git] / include / configs / p2371-2180.h
CommitLineData
25734281
SW
1/*
2 * (C) Copyright 2013-2015
3 * NVIDIA Corporation <www.nvidia.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#ifndef _P2371_2180_H
9#define _P2371_2180_H
10
11#include <linux/sizes.h>
12
13#include "tegra210-common.h"
14
15/* High-level configuration options */
16#define V_PROMPT "Tegra210 (P2371-2180) # "
17#define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180"
18
19/* Board-specific serial config */
20#define CONFIG_TEGRA_ENABLE_UARTA
21
22/* I2C */
23#define CONFIG_SYS_I2C_TEGRA
24#define CONFIG_CMD_I2C
25
26/* SD/MMC */
27#define CONFIG_MMC
28#define CONFIG_GENERIC_MMC
29#define CONFIG_TEGRA_MMC
30#define CONFIG_CMD_MMC
31
32/* Environment in eMMC, at the end of 2nd "boot sector" */
33#define CONFIG_ENV_IS_IN_MMC
34#define CONFIG_SYS_MMC_ENV_DEV 0
35#define CONFIG_SYS_MMC_ENV_PART 2
36#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
37
38/* SPI */
39#define CONFIG_SPI_FLASH_WINBOND
40#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
41#define CONFIG_SF_DEFAULT_SPEED 24000000
42#define CONFIG_CMD_SPI
43#define CONFIG_CMD_SF
44#define CONFIG_SPI_FLASH_SIZE (4 << 20)
45
46/* USB2.0 Host support */
47#define CONFIG_USB_EHCI
48#define CONFIG_USB_EHCI_TEGRA
49#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
50#define CONFIG_USB_STORAGE
51#define CONFIG_CMD_USB
52
53/* USB networking support */
54#define CONFIG_USB_HOST_ETHER
55#define CONFIG_USB_ETHER_ASIX
56
57/* General networking support */
58#define CONFIG_CMD_DHCP
59
60#include "tegra-common-usb-gadget.h"
61#include "tegra-common-post.h"
62
63#define COUNTER_FREQUENCY 38400000
64
65#endif /* _P2371_2180_H */