[people/ms/u-boot.git] / include / configs / pxm2.h

/*
 * siemens pxm2
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_PXM2_H
#define __CONFIG_PXM2_H

#define CONFIG_SIEMENS_PXM2
#define MACH_TYPE_PXM2			4309
#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_PXM2

#include "siemens-am33x-common.h"

#define CONFIG_SYS_MPUCLK	720
#define DDR_IOCTRL_VAL		0x18b
#define DDR_PLL_FREQ		266

#define BOARD_DFU_BUTTON_GPIO	59
#define BOARD_LCD_POWER		111
#define BOARD_BACK_LIGHT	112
#define BOARD_TOUCH_POWER	57

#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=59\0" \
	"led0=117,0,1\0" \

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(512 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		400000
#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50

#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300

#undef CONFIG_SPL_NET_SUPPORT
#undef CONFIG_SPL_NET_VCI_STRING
#undef CONFIG_SPL_ETH_SUPPORT

#define CONFIG_PHY_ATHEROS

#define CONFIG_FACTORYSET

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

#ifndef CONFIG_SPL_BUILD

/* Use common default */
#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V1

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=pxm2\0" \
	"nand_img_size=0x500000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"splashpos=m,m\0"	\
	CONFIG_ENV_SETTINGS_V1 \
	CONFIG_ENV_SETTINGS_NAND_V1 \
	"mmc_dev=0\0" \
	"mmc_root=/dev/mmcblk0p2 rw\0" \
	"mmc_root_fs_type=ext4 rootwait\0" \
	"mmc_load_uimage=" \
		"mmc rescan; " \
		"setenv bootfile uImage;" \
		"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	"importbootenv=echo Importing environment from mmc ...; " \
		"env import -t $loadaddr $filesize\0" \
	"mmc_args=run bootargs_defaults;" \
		"mtdparts default;" \
		"setenv bootargs ${bootargs} " \
		"root=${mmc_root} ${mtdparts}" \
		"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
		"eth=${ethaddr} " \
		"\0" \
	"mmc_boot=run mmc_args; " \
		"run mmc_load_uimage; " \
		"bootm ${kloadaddr}\0" \
	""

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */
#define CONFIG_BOOTDELAY		3

#define CONFIG_BOOTCOMMAND \
	"if dfubutton; then " \
		"run dfu_start; " \
		"reset; " \
	"fi; " \
	"if mmc rescan; then " \
		"echo SD/MMC found on device ${mmc_dev};" \
		"if run loadbootenv; then " \
			"echo Loaded environment from ${bootenv};" \
			"run importbootenv;" \
		"fi;" \
		"if test -n $uenvcmd; then " \
			"echo Running uenvcmd ...;" \
			"run uenvcmd;" \
		"fi;" \
		"if run mmc_load_uimage; then " \
			"run mmc_args;" \
			"bootm ${kloadaddr};" \
		"fi;" \
	"fi;" \
	"run nand_boot;" \
	"reset;"

#else
#define CONFIG_BOOTDELAY		0

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */

#define CONFIG_VIDEO
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CMD_BMP
#define DA8XX_LCD_CNTL_BASE	LCD_CNTL_BASE
#define PWM_TICKS	0x1388
#define PWM_DUTY	0x200
#define CONFIG_SYS_CONSOLE_BG_COL	0xff
#define CONFIG_SYS_CONSOLE_FG_COL	0x00
#endif

#endif	/* ! __CONFIG_PXM2_H */
Commit	Line	Data
c0dcece7 HS	1	/*
	2	* siemens pxm2
	3	* (C) Copyright 2013 Siemens Schweiz AG
	4	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	5	*
	6	* Based on:
	7	* U-Boot file:/include/configs/am335x_evm.h
	8	*
	9	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	10	*
	11	* SPDX-License-Identifier: GPL-2.0+
	12	*/
	13
	14	#ifndef __CONFIG_PXM2_H
	15	#define __CONFIG_PXM2_H
	16
	17	#define CONFIG_SIEMENS_PXM2
	18	#define MACH_TYPE_PXM2 4309
	19	#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
	20
	21	#include "siemens-am33x-common.h"
	22
	23	#define CONFIG_SYS_MPUCLK 720
9fc2ed40	24	#define DDR_IOCTRL_VAL 0x18b
c0dcece7 HS	25	#define DDR_PLL_FREQ 266
	26
	27	#define BOARD_DFU_BUTTON_GPIO 59
c0dcece7 HS	28	#define BOARD_LCD_POWER 111
	29	#define BOARD_BACK_LIGHT 112
	30	#define BOARD_TOUCH_POWER 57
	31
61159b76 HS	32	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	33	"button_dfu0=59\0" \
	34	"led0=117,0,1\0" \
	35
c0dcece7 HS	36	/* Physical Memory Map */
	37	#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
	38
	39	/* I2C Configuration */
	40	#define CONFIG_SYS_I2C_SPEED 400000
	41	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	42
c0dcece7 HS	43	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
	44
	45	#undef CONFIG_SPL_NET_SUPPORT
	46	#undef CONFIG_SPL_NET_VCI_STRING
	47	#undef CONFIG_SPL_ETH_SUPPORT
	48
c0dcece7 HS	49	#define CONFIG_PHY_ATHEROS
	50
	51	#define CONFIG_FACTORYSET
	52
c0dcece7 HS	53	/* Watchdog */
	54	#define CONFIG_OMAP_WATCHDOG
	55
	56	#ifndef CONFIG_SPL_BUILD
	57
61159b76 HS	58	/* Use common default */
	59	#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V1
	60
c0dcece7 HS	61	/* Default env settings */
	62	#define CONFIG_EXTRA_ENV_SETTINGS \
	63	"hostname=pxm2\0" \
	64	"nand_img_size=0x500000\0" \
	65	"optargs=\0" \
61159b76 HS	66	"preboot=draco_led 0\0" \
61159b76 HS	67	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
56eb3da4	68	"splashpos=m,m\0" \
61159b76 HS	69	CONFIG_ENV_SETTINGS_V1 \
61159b76 HS	70	CONFIG_ENV_SETTINGS_NAND_V1 \
c0dcece7 HS	71	"mmc_dev=0\0" \
	72	"mmc_root=/dev/mmcblk0p2 rw\0" \
	73	"mmc_root_fs_type=ext4 rootwait\0" \
	74	"mmc_load_uimage=" \
	75	"mmc rescan; " \
	76	"setenv bootfile uImage;" \
	77	"fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
	78	"loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
	79	"importbootenv=echo Importing environment from mmc ...; " \
	80	"env import -t $loadaddr $filesize\0" \
	81	"mmc_args=run bootargs_defaults;" \
	82	"mtdparts default;" \
	83	"setenv bootargs ${bootargs} " \
	84	"root=${mmc_root} ${mtdparts}" \
	85	"rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
	86	"eth=${ethaddr} " \
	87	"\0" \
	88	"mmc_boot=run mmc_args; " \
	89	"run mmc_load_uimage; " \
	90	"bootm ${kloadaddr}\0" \
	91	""
	92
	93	#ifndef CONFIG_RESTORE_FLASH
	94	/* set to negative value for no autoboot */
	95	#define CONFIG_BOOTDELAY 3
	96
	97	#define CONFIG_BOOTCOMMAND \
	98	"if dfubutton; then " \
	99	"run dfu_start; " \
	100	"reset; " \
	101	"fi; " \
	102	"if mmc rescan; then " \
	103	"echo SD/MMC found on device ${mmc_dev};" \
	104	"if run loadbootenv; then " \
	105	"echo Loaded environment from ${bootenv};" \
	106	"run importbootenv;" \
	107	"fi;" \
	108	"if test -n $uenvcmd; then " \
	109	"echo Running uenvcmd ...;" \
	110	"run uenvcmd;" \
	111	"fi;" \
	112	"if run mmc_load_uimage; then " \
	113	"run mmc_args;" \
	114	"bootm ${kloadaddr};" \
	115	"fi;" \
	116	"fi;" \
	117	"run nand_boot;" \
56eb3da4	118	"reset;"
c0dcece7 HS	119
	120	#else
	121	#define CONFIG_BOOTDELAY 0
	122
	123	#define CONFIG_BOOTCOMMAND \
	124	"setenv autoload no; " \
	125	"dhcp; " \
	126	"if tftp 80000000 debrick.scr; then " \
	127	"source 80000000; " \
	128	"fi"
	129	#endif
	130	#endif /* CONFIG_SPL_BUILD */
	131
	132	#define CONFIG_VIDEO
	133	#if defined(CONFIG_VIDEO)
	134	#define CONFIG_VIDEO_DA8XX
	135	#define CONFIG_CFB_CONSOLE
	136	#define CONFIG_VGA_AS_SINGLE_DEVICE
	137	#define CONFIG_SPLASH_SCREEN
	138	#define CONFIG_SPLASH_SCREEN_ALIGN
	139	#define CONFIG_VIDEO_LOGO
	140	#define CONFIG_VIDEO_BMP_RLE8
	141	#define CONFIG_VIDEO_BMP_LOGO
	142	#define CONFIG_CMD_BMP
	143	#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
	144	#define PWM_TICKS 0x1388
	145	#define PWM_DUTY 0x200
56eb3da4 SE	146	#define CONFIG_SYS_CONSOLE_BG_COL 0xff
56eb3da4 SE	147	#define CONFIG_SYS_CONSOLE_FG_COL 0x00
c0dcece7 HS	148	#endif
	149
	150	#endif /* ! __CONFIG_PXM2_H */