[people/ms/u-boot.git] / include / configs / qemu-mips64.h

/*
 * (C) Copyright 2003
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * This file contains the configuration parameters for qemu-mips64 target.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_QEMU_MIPS

#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_MISC_INIT_R

#define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */

#define CONFIG_BAUDRATE		115200

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
#undef CONFIG_BOOTARGS

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"addmisc=setenv bootargs ${bootargs} "				\
		"console=ttyS0,${baudrate} "				\
		"panic=1\0"						\
	"bootfile=/tftpboot/vmlinux\0"					\
	"load=tftp ffffffff80500000 ${u-boot}\0"			\
	""

#define CONFIG_BOOTCOMMAND	"bootp;bootelf"

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */

#define CONFIG_DRIVER_NE2000
#define CONFIG_DRIVER_NE2000_BASE	0xffffffffb4000300

#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		115200
#define CONFIG_SYS_NS16550_COM1		0xffffffffb40003f8
#define CONFIG_CONS_INDEX		1

#define CONFIG_CMD_IDE
#define CONFIG_DOS_PARTITION

#ifdef CONFIG_SYS_BIG_ENDIAN
#define CONFIG_IDE_SWAP_IO
#endif

#define CONFIG_SYS_IDE_MAXBUS		2
#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
#define CONFIG_SYS_ATA_DATA_OFFSET	0
#define CONFIG_SYS_ATA_REG_OFFSET	0
#define CONFIG_SYS_ATA_BASE_ADDR	0xffffffffb4000000

#define CONFIG_SYS_IDE_MAXDEVICE	4

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */

#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING

/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		256
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
/* max number of command args */
#define CONFIG_SYS_MAXARGS		16

#define CONFIG_SYS_MALLOC_LEN		128*1024

#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024

#define CONFIG_SYS_MHZ			132

#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)

/* Cached addr */
#define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		0xffffffff81000000

#define CONFIG_SYS_MEMTEST_START	0xffffffff80100000
#define CONFIG_SYS_MEMTEST_END		0xffffffff80800000

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */
/* The following #defines are needed to get flash environment right */
#define CONFIG_SYS_TEXT_BASE		0xffffffffbfc00000 /* Rom version */
#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN		(192 << 10)

#define CONFIG_SYS_INIT_SP_OFFSET	0x400000

/* We boot from this flash, selected with dip switch */
#define CONFIG_SYS_FLASH_BASE		0xffffffffbfc00000
#define CONFIG_SYS_MAX_FLASH_BANKS	1
#define CONFIG_SYS_MAX_FLASH_SECT	128
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE

#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)

/* Address and size of Primary Environment Sector */
#define CONFIG_ENV_SIZE		0x8000

#define CONFIG_ENV_OVERWRITE	1

#define MEM_SIZE		128

#define CONFIG_LZMA

/*-----------------------------------------------------------------------
 * Cache Configuration
 */
#define CONFIG_SYS_DCACHE_SIZE		16384
#define CONFIG_SYS_ICACHE_SIZE		16384
#define CONFIG_SYS_CACHELINE_SIZE	32

#endif /* __CONFIG_H */
Commit	Line	Data
32afad78 ZZ	1	/*
	2	* (C) Copyright 2003
	3	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
32afad78 ZZ	6	*/
	7
	8	/*
	9	* This file contains the configuration parameters for qemu-mips64 target.
	10	*/
	11
	12	#ifndef __CONFIG_H
	13	#define __CONFIG_H
	14
32afad78	15	#define CONFIG_QEMU_MIPS
bdb53cf0	16
bdb53cf0	17	#define CONFIG_DISPLAY_BOARDINFO
32afad78 ZZ	18	#define CONFIG_MISC_INIT_R
	19
	20	#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
	21
	22	#define CONFIG_BAUDRATE 115200
	23
	24	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
	25	#undef CONFIG_BOOTARGS
	26
	27	#define CONFIG_EXTRA_ENV_SETTINGS \
	28	"addmisc=setenv bootargs ${bootargs} " \
	29	"console=ttyS0,${baudrate} " \
	30	"panic=1\0" \
	31	"bootfile=/tftpboot/vmlinux\0" \
	32	"load=tftp ffffffff80500000 ${u-boot}\0" \
	33	""
	34
	35	#define CONFIG_BOOTCOMMAND "bootp;bootelf"
	36
	37	/*
	38	* BOOTP options
	39	*/
	40	#define CONFIG_BOOTP_BOOTFILESIZE
	41	#define CONFIG_BOOTP_BOOTPATH
	42	#define CONFIG_BOOTP_GATEWAY
	43	#define CONFIG_BOOTP_HOSTNAME
	44
	45	/*
	46	* Command line configuration.
	47	*/
32afad78 ZZ	48
	49	#define CONFIG_DRIVER_NE2000
	50	#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300
	51
32afad78 ZZ	52	#define CONFIG_SYS_NS16550_SERIAL
	53	#define CONFIG_SYS_NS16550_REG_SIZE 1
	54	#define CONFIG_SYS_NS16550_CLK 115200
	55	#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8
	56	#define CONFIG_CONS_INDEX 1
	57
	58	#define CONFIG_CMD_IDE
	59	#define CONFIG_DOS_PARTITION
	60
713a9e15 SG	61	#ifdef CONFIG_SYS_BIG_ENDIAN
	62	#define CONFIG_IDE_SWAP_IO
	63	#endif
	64
32afad78 ZZ	65	#define CONFIG_SYS_IDE_MAXBUS 2
	66	#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0
	67	#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170
	68	#define CONFIG_SYS_ATA_DATA_OFFSET 0
	69	#define CONFIG_SYS_ATA_REG_OFFSET 0
	70	#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000
	71
	72	#define CONFIG_SYS_IDE_MAXDEVICE 4
	73
32afad78 ZZ	74	/*
	75	* Miscellaneous configurable options
	76	*/
	77	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	78
32afad78 ZZ	79	#define CONFIG_AUTO_COMPLETE
32afad78 ZZ	80	#define CONFIG_CMDLINE_EDITING
32afad78 ZZ	81
	82	/* Console I/O Buffer Size */
	83	#define CONFIG_SYS_CBSIZE 256
	84	/* Print Buffer Size */
	85	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	86	/* max number of command args */
	87	#define CONFIG_SYS_MAXARGS 16
	88
	89	#define CONFIG_SYS_MALLOC_LEN 128*1024
	90
	91	#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
	92
	93	#define CONFIG_SYS_MHZ 132
	94
	95	#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
	96
32afad78 ZZ	97	/* Cached addr */
	98	#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
	99
	100	/* default load address */
	101	#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000
	102
	103	#define CONFIG_SYS_MEMTEST_START 0xffffffff80100000
	104	#define CONFIG_SYS_MEMTEST_END 0xffffffff80800000
	105
	106	/*-----------------------------------------------------------------------
	107	* FLASH and environment organization
	108	*/
	109	/* The following #defines are needed to get flash environment right */
	110	#define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */
	111	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	112	#define CONFIG_SYS_MONITOR_LEN (192 << 10)
	113
	114	#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
	115
	116	/* We boot from this flash, selected with dip switch */
	117	#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000
	118	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	119	#define CONFIG_SYS_MAX_FLASH_SECT 128
	120	#define CONFIG_SYS_FLASH_CFI
	121	#define CONFIG_FLASH_CFI_DRIVER
	122	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	123
	124	#define CONFIG_ENV_IS_IN_FLASH
	125	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
	126
	127	/* Address and size of Primary Environment Sector */
	128	#define CONFIG_ENV_SIZE 0x8000
	129
	130	#define CONFIG_ENV_OVERWRITE 1
	131
	132	#define MEM_SIZE 128
	133
	134	#define CONFIG_LZMA
	135
	136	/*-----------------------------------------------------------------------
	137	* Cache Configuration
	138	*/
	139	#define CONFIG_SYS_DCACHE_SIZE 16384
	140	#define CONFIG_SYS_ICACHE_SIZE 16384
	141	#define CONFIG_SYS_CACHELINE_SIZE 32
	142
	143	#endif /* __CONFIG_H */