]>
Commit | Line | Data |
---|---|---|
7ca6f363 BS |
1 | /* |
2 | * Configuration settings for the SAMA5D3 Xplained board. | |
3 | * | |
4 | * Copyright (C) 2014 Atmel Corporation | |
5 | * Bo Shen <voice.shen@atmel.com> | |
6 | * | |
7 | * SPDX-License-Identifier: GPL-2.0+ | |
8 | */ | |
9 | ||
10 | #ifndef __CONFIG_H | |
11 | #define __CONFIG_H | |
12 | ||
13 | #include <asm/hardware.h> | |
14 | ||
15 | #define CONFIG_SYS_TEXT_BASE 0x26f00000 | |
16 | ||
17 | /* ARM asynchronous clock */ | |
18 | #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 | |
19 | #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ | |
7ca6f363 BS |
20 | |
21 | #define CONFIG_AT91FAMILY | |
22 | #define CONFIG_ARCH_CPU_INIT | |
23 | #define CONFIG_SKIP_LOWLEVEL_INIT | |
24 | #define CONFIG_BOARD_EARLY_INIT_F | |
25 | #define CONFIG_DISPLAY_CPUINFO | |
26 | ||
27 | #define CONFIG_CMD_BOOTZ | |
28 | #define CONFIG_OF_LIBFDT /* Device Tree support */ | |
29 | ||
30 | /* general purpose I/O */ | |
31 | #define CONFIG_AT91_GPIO | |
32 | ||
33 | /* serial console */ | |
34 | #define CONFIG_ATMEL_USART | |
35 | #define CONFIG_USART_BASE ATMEL_BASE_DBGU | |
36 | #define CONFIG_USART_ID ATMEL_ID_DBGU | |
37 | ||
38 | /* | |
39 | * This needs to be defined for the OHCI code to work but it is defined as | |
40 | * ATMEL_ID_UHPHS in the CPU specific header files. | |
41 | */ | |
42 | #define ATMEL_ID_UHP ATMEL_ID_UHPHS | |
43 | ||
44 | /* | |
45 | * Specify the clock enable bit in the PMC_SCER register. | |
46 | */ | |
47 | #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP | |
48 | ||
49 | #define CONFIG_BOOTDELAY 3 | |
50 | ||
51 | /* | |
52 | * BOOTP options | |
53 | */ | |
54 | #define CONFIG_BOOTP_BOOTFILESIZE | |
55 | #define CONFIG_BOOTP_BOOTPATH | |
56 | #define CONFIG_BOOTP_GATEWAY | |
57 | #define CONFIG_BOOTP_HOSTNAME | |
58 | ||
59 | /* No NOR flash */ | |
60 | #define CONFIG_SYS_NO_FLASH | |
61 | ||
62 | /* | |
63 | * Command line configuration. | |
64 | */ | |
65 | #include <config_cmd_default.h> | |
66 | #undef CONFIG_CMD_FPGA | |
67 | #undef CONFIG_CMD_IMI | |
68 | #undef CONFIG_CMD_LOADS | |
69 | #define CONFIG_CMD_PING | |
70 | #define CONFIG_CMD_DHCP | |
71 | ||
72 | /* SDRAM */ | |
73 | #define CONFIG_NR_DRAM_BANKS 1 | |
74 | #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS | |
75 | #define CONFIG_SYS_SDRAM_SIZE 0x10000000 | |
76 | ||
77 | #define CONFIG_SYS_INIT_SP_ADDR \ | |
78 | (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) | |
79 | ||
80 | /* NAND flash */ | |
81 | #define CONFIG_CMD_NAND | |
82 | ||
83 | #ifdef CONFIG_CMD_NAND | |
84 | #define CONFIG_NAND_ATMEL | |
85 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
86 | #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 | |
87 | /* our ALE is AD21 */ | |
88 | #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) | |
89 | /* our CLE is AD22 */ | |
90 | #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) | |
91 | #define CONFIG_SYS_NAND_ONFI_DETECTION | |
92 | /* PMECC & PMERRLOC */ | |
93 | #define CONFIG_ATMEL_NAND_HWECC | |
94 | #define CONFIG_ATMEL_NAND_HW_PMECC | |
95 | #define CONFIG_PMECC_CAP 4 | |
96 | #define CONFIG_PMECC_SECTOR_SIZE 512 | |
97 | #define CONFIG_CMD_NAND_TRIMFFS | |
98 | #define CONFIG_CMD_MTDPARTS | |
99 | ||
100 | #define CONFIG_MTD_DEVICE | |
101 | #define CONFIG_MTD_PARTITIONS | |
102 | #define CONFIG_RBTREE | |
103 | #define CONFIG_LZO | |
104 | #define CONFIG_CMD_UBI | |
105 | #define CONFIG_CMD_UBIFS | |
106 | #endif | |
107 | ||
108 | /* Ethernet Hardware */ | |
109 | #define CONFIG_MACB | |
110 | #define CONFIG_RMII | |
111 | #define CONFIG_NET_MULTI | |
112 | #define CONFIG_NET_RETRY_COUNT 20 | |
113 | #define CONFIG_MACB_SEARCH_PHY | |
114 | #define CONFIG_RGMII | |
115 | #define CONFIG_CMD_MII | |
116 | #define CONFIG_PHYLIB | |
117 | ||
118 | /* MMC */ | |
119 | #define CONFIG_CMD_MMC | |
120 | ||
121 | #ifdef CONFIG_CMD_MMC | |
122 | #define CONFIG_MMC | |
123 | #define CONFIG_GENERIC_MMC | |
124 | #define CONFIG_GENERIC_ATMEL_MCI | |
125 | #define CONFIG_ATMEL_MCI_8BIT | |
126 | #endif | |
127 | ||
128 | /* USB */ | |
129 | #define CONFIG_CMD_USB | |
130 | ||
131 | #ifdef CONFIG_CMD_USB | |
132 | #define CONFIG_USB_ATMEL | |
133 | #define CONFIG_USB_ATMEL_CLK_SEL_UPLL | |
134 | #define CONFIG_USB_OHCI_NEW | |
135 | #define CONFIG_SYS_USB_OHCI_CPU_INIT | |
136 | #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI | |
137 | #define CONFIG_SYS_USB_OHCI_SLOT_NAME "SAMA5D3 Xplained" | |
138 | #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 | |
139 | #define CONFIG_DOS_PARTITION | |
140 | #define CONFIG_USB_STORAGE | |
141 | #endif | |
142 | ||
143 | #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) | |
144 | #define CONFIG_CMD_FAT | |
145 | #define CONFIG_FAT_WRITE | |
146 | #define CONFIG_CMD_EXT4 | |
147 | #define CONFIG_CMD_EXT4_WRITE | |
148 | #endif | |
149 | ||
150 | #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ | |
151 | ||
152 | #if CONFIG_SYS_USE_NANDFLASH | |
153 | /* bootstrap + u-boot + env in nandflash */ | |
154 | #define CONFIG_ENV_IS_IN_NAND | |
155 | #define CONFIG_ENV_OFFSET 0xc0000 | |
156 | #define CONFIG_ENV_OFFSET_REDUND 0x100000 | |
157 | #define CONFIG_ENV_SIZE 0x20000 | |
158 | #define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ | |
159 | "nand read 0x22000000 0x200000 0x600000;" \ | |
160 | "bootz 0x22000000 - 0x21000000" | |
161 | #elif CONFIG_SYS_USE_MMC | |
162 | /* bootstrap + u-boot + env in sd card */ | |
163 | #define CONFIG_ENV_IS_IN_MMC | |
164 | #define CONFIG_ENV_OFFSET 0x2000 | |
165 | #define CONFIG_ENV_SIZE 0x1000 | |
166 | #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \ | |
167 | "fatload mmc 0:1 0x22000000 zImage; " \ | |
168 | "bootz 0x22000000 - 0x21000000" | |
169 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
170 | #else | |
171 | #define CONFIG_ENV_IS_NOWHERE | |
172 | #endif | |
173 | ||
174 | #ifdef CONFIG_SYS_USE_MMC | |
175 | #define CONFIG_BOOTARGS \ | |
176 | "console=ttyS0,115200 earlyprintk " \ | |
177 | "root=/dev/mmcblk0p2 rw rootwait" | |
178 | #else | |
179 | #define CONFIG_BOOTARGS \ | |
180 | "console=ttyS0,115200 earlyprintk " \ | |
181 | "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ | |
182 | "256K(env),256k(evn_redundent),256k(spare)," \ | |
183 | "512k(dtb),6M(kernel)ro,-(rootfs) " \ | |
184 | "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" | |
185 | #endif | |
186 | ||
187 | #define CONFIG_BAUDRATE 115200 | |
188 | ||
189 | #define CONFIG_SYS_PROMPT "U-Boot> " | |
190 | #define CONFIG_SYS_CBSIZE 256 | |
191 | #define CONFIG_SYS_MAXARGS 16 | |
192 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
193 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
194 | #define CONFIG_SYS_LONGHELP | |
195 | #define CONFIG_CMDLINE_EDITING | |
196 | #define CONFIG_AUTO_COMPLETE | |
197 | #define CONFIG_SYS_HUSH_PARSER | |
198 | ||
199 | /* Size of malloc() pool */ | |
200 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) | |
201 | ||
202 | #endif |